Hello, new user here, I have a technical problem and I could use some advice. If I posted on the wrong thread or if this is already solved, please forgive me.
Anyways, It was like 02:00, my phone was at around 38% battery at the time, I figured this would be enhough for me to make a backup of my CM9 ROM and then restore CM7. I set Clockworkmod to backup CM9, and that was successful. Then I restored CM7 from a backup of it I made earlier. I think it was successful but I fell asleep before I could notice. (Staring at clockworkmod restoring data puts you to sleep) It most likely ran out of batteries after completing the restore in Clockworkmod.
When I woke up today, I found my phone shut down and with no battery. I proceeded to plug it in to my PC. No charging... I saw that was wierd, and then when I tried again I figured out my phone was essentially dead.
Here's the problem, when I press the power button, it vibrates successively, and shows no signs of booting. I began reading forums, including Modaco (I had to use google cache because it just happened to be offline at the worst possible time), and they say that it's because the battery is dead. So I put it in my wall charger. After an hour or so, same problem. No boot, always vibrating in succession, and also even though I press volume up and down I get no signs of clockworkmod.
When I plug it into my USB, strangely my mouse disconnects from my PC. I use a laptop, and this never happened before today, and it is possibly related to my problem. In short, Blade plugs into USB, Mouse dead.
I don't know if my phone is refusing to charge or if it's bricked, I can't tell, and I really fear it may be bricked, because I can't afford a replacement. (No job, still living with my mom, I'm 19) I also have no clue if my computer can even recognize it, nothing shows up except for this wierd mouse problem.
So, can anyone help me?
Connect charger with blade,then boot into recovery....
Is it booting into recovery?
Nope
Nope, I wish. : ( When I connect it to the charger and try to turn it on, it only vibrates, nothing else, no recovery, no Android logo.
Vryonorg said:
Nope, I wish. : ( When I connect it to the charger and try to turn it on, it only vibrates, nothing else, no recovery, no Android logo.
Click to expand...
Click to collapse
Do a tpt or use the adb method.. I experienced this issue before.. after tpt,it worked fine..
Sent from my ZTE Blade using XDA app
Okay
Very well, I'll go look it up. If I have any doubts I'll post here again.
Uhhh
Well I tried the TPT method, I did the manual steps as described in a website I can't link to because I have too few posts ( : ( ), and the phone does nothing, it just keeps vibrating in succession as I hold the power, volume buttons and other buttons, even with the TPT in my SDCard, is there anything I'm doing wrong, and how do I do the ADB method, is there a basic tutorial on that that's easily explained? Thanks in advance.
EDIT: I've got dim signs of life from my phone as the red led light appeared for a brief moment. I'll see what happens next.
FINAL EDIT: After a while of waiting, the red light greeted me again. And I pressed the power on button and my phone turned on like normal! : O I didn't even need to TPT! 1% Battery... My phone scared the heck out of me by being half-dead... Note to self: Never let your phone discharge too much.
Somebody close this thread ; D
my mobile having same problem
Related
Editing this as I'm desperate for help and things have moved on since I first posted, below is where I am up to post 11 of this thread.
I flashed Vegacomb b (exe), it restarted but stayed on the warning about paying for vegacomb for 10-15 minutes which didn't seem right so I held power for 6 seconds and it turned off. After that it would never turn on or go into recovery (I know all the methods, none worked).
Today I unhooked the battery, when I plug the battery back in the screen comes on for a second but then it's as it was, unresponsive. HOWEVER, if I plug the mains in with the battery disconnected then it immediately tries booting but still sticks at the warning (left for over 20 minutes). If I plug the battery in while on this screen then remove the mains it stays on. The power button is unresponsive through this so I still cannot get into recovery.
Any more ideas that haven't been mentioned?
I've tried well over 100 times to get into recovery but it's not happening
anyone willing to have a go at fixing (cheaply!) if I send them it?
Original Post:
Hi guys, just managed to (re?) install Vegacomb (b, from exe), it restarted but stayed on the white screen with the warning text about paying for Vegacomb for over 10 minutes so I held down the power button to turn it off, now I cannot do anything to boot it up (tried holding power button down from 0.5 seconds to 60 seconds!), it also won't boot into recovery. Is there anything at all that can be done to get this going?
cheers
OK, I've tried holding down back while plugging in (fully charged btw), tried all variations of button presses with back and power, with and without USB, with and without power cable.
Only got until 10PM (UK time) to get this sorted (it's now 6PM) so any help/advise would be appreciated
Flash back to modded stock then try again.
From modded stock go app drawer and run recovery
From recovery wipe data, cache then go advance then wipe dalvik
Then press back
Then install zip from SD
Choose vegacomb from whatever directory on your SD you copied it to then confirm
If you ain't Got Vegacombe zip then download it.
Or you could run the .exe again but the above is my preferred method.
Also you might need to download modded stock v2 if you ain't already got it.
Good luck.
intel007 said:
Flash back to modded stock then try again.
From modded stock go app drawer and run recovery
From recovery wipe data, cache then go advance then wipe dalvik
Then press back
Then install zip from SD
Choose vegacomb then confirm
If you ain't Got Vegacombe zip then download it.
Or you could run the .exe again but the above is my preferred method.
Good luck.
Click to expand...
Click to collapse
??
the Vega won't turn on and won't go into recovery, cannot flash anything, nothing comes up on PC, tried all variations of the back and power buttons (inc back, plug in power & usb, press power, leave 2 seconds and release back) over 100 times. it's like it's dead.
the only thing it does is show a blue LED when I plug the power cable in
I've read that if you got less than 50 or 60% battery it wont go into flash mode (back button 2 seconds - power & back 2 seconds)
Have you got enough battery cause mine takes half a day to charge.
intel007 said:
I've read that if you got less than 50 or 60% battery it wont go into flash mode (back button 2 seconds - power & back 2 seconds)
Have you got enough battery cause mine takes half a day to charge.
Click to expand...
Click to collapse
100% (solid blue LED), been on charge for over 24 hours
I'm baffled mate, I've had same issue couple of times but after 10mins or so I've always got it to power back on.
Bricked
I've had the same problem and although quite drastic, remove the rear cover and unplug the battery connection (the multipin one with red and brown/black wires).
With the mains plug out,i found that if you press volume up and power with the wires unplugged and leav eit for a few mins then use back + power it will start as you need it to.
It may take a few tries but i have managed to do it following this procedure about 7-8 times.
Hope this helps.
DAve
I had trouble getting into recovery when the Vega was 100% charged (i.e. charge led was solid blue). When I let it discharge a little so it was flashing with the charger plugged in, I managed to get into recovery then.
dmarchant said:
I had trouble getting into recovery when the Vega was 100% charged (i.e. charge led was solid blue). When I let it discharge a little so it was flashing with the charger plugged in, I managed to get into recovery then.
Click to expand...
Click to collapse
I can't discharge it though as it doesn't turn on, left it 14 hours from last night, back at work again now and it still says fully charged
got the battery disconnected now to give it a try
Disconnected battery for around 10 minutes, put it all back together, still can't boot or get to recovery
EDIT: it works when the battery is disconnected (goes to the Vegacomb warning screen but no further, cannot power off or get to recovery still)
any ideas?
Anyone got any ideas?
it's meant to be unbrickable from what I've read so there must be a way around it but I'm out of ideas!
its user error. remeber to put it into recovery mode you need the power cable plugged into it too as well as usb.
slybunda said:
its user error. remeber to put it into recovery mode you need the power cable plugged into it too as well as usb.
Click to expand...
Click to collapse
Cheers, but its not user error. I'm not that stupid
Hi, this may not help but i had trouble flashing the stock rom because of the battery being fully charged, could only get the screen to light up so left it over night and then went through the normal routine and got into recovery.
Bill
Hi there
Just one question, how do you know for sure it hasn't gone into nvflash mode?
I know what you are going through trying to get the ruddy thing into nvflash, it's a mare if you don't quite get that timing right but seeing as the screen doesn't light up when it's in nvflash what is telling you whether you are actually in it, other than the screen coming on to say you are not or relying on a windows message?
As I said I had the same problems many a time but I use Audi tool now to tell me if nvflash has started, I got it off the Modaco forum, but when you are in nvflash it actually tells you so rather than relying on perhaps windows to tell you it has happened
If you haven't come across the audi tool before then just do a search for it on Modaco, I don't know if they have got it here on XDA.
mmace said:
Anyone got any ideas?
it's meant to be unbrickable from what I've read so there must be a way around it but I'm out of ideas!
Click to expand...
Click to collapse
wow, i'm quite surprised by the number of people who are taking their batteries out when they think there is a problem. You should never need to do this unless it is actually faulty.
Ok yes the Vega is nearly indestructible I have had my in a complete mess many times and have never had to do anything that hard to recover. Some times it will be a pain to get into nvflash mode but this can always be done just have to be patient and know a couple of tricks.
If you have tried the back button and then the power a few times and nothing there is another method.
Instead unplug the power then hold the back button down, whilst holding down the back button plug in the power release the back button after a couple of seconds (I like to count to 5)
I am hoping that you already have the USB cable connected and the right drivers installed on your PC.
Billy..
If you need more help head over to TabletRoms and look in the Vega forum (sorry XDA guys just there is a lot of other useful information there)
wks said:
Hi, this may not help but i had trouble flashing the stock rom because of the battery being fully charged, could only get the screen to light up so left it over night and then went through the normal routine and got into recovery.
Bill
Click to expand...
Click to collapse
I've tired fully charged and letting the battery drain for 40+ mins after it's been on the "warning" screen
mitt69 said:
Hi there
Just one question, how do you know for sure it hasn't gone into nvflash mode?
I know what you are going through trying to get the ruddy thing into nvflash, it's a mare if you don't quite get that timing right but seeing as the screen doesn't light up when it's in nvflash what is telling you whether you are actually in it, other than the screen coming on to say you are not or relying on a windows message?
As I said I had the same problems many a time but I use Audi tool now to tell me if nvflash has started, I got it off the Modaco forum, but when you are in nvflash it actually tells you so rather than relying on perhaps windows to tell you it has happened
If you haven't come across the audi tool before then just do a search for it on Modaco, I don't know if they have got it here on XDA.
Click to expand...
Click to collapse
I have Audi, I also have Device manager open, I know 100% it's never gone into recovery mode sine I started with this problem.
BillyFish said:
wow, i'm quite surprised by the number of people who are taking their batteries out when they think there is a problem. You should never need to do this unless it is actually faulty.
Ok yes the Vega is nearly indestructible I have had my in a complete mess many times and have never had to do anything that hard to recover. Some times it will be a pain to get into nvflash mode but this can always be done just have to be patient and know a couple of tricks.
If you have tried the back button and then the power a few times and nothing there is another method.
Instead unplug the power then hold the back button down, whilst holding down the back button plug in the power release the back button after a couple of seconds (I like to count to 5)
I am hoping that you already have the USB cable connected and the right drivers installed on your PC.
Billy..
If you need more help head over to TabletRoms and look in the Vega forum (sorry XDA guys just there is a lot of other useful information there)
Click to expand...
Click to collapse
TabletRoms has been no help for me, there's been no reply at all for my problem but there has here and at MoDaCo. I pulled the battery as a last resort as NOTHING is working, I've tried all the tricks at least 2 dozen times, some a hundred +, including the one you mention
Well I don't want to teach you to suck eggs, but I take it you did use Audi to delete and replace your drivers.
And then when powering on the Vega you held the back button for 2 secs and then the back and power buttons for 6 secs to get the Vega detected?
For me I can only see that there can only be 3 other possible causes
1./ the back button is broken on the vega
2./ The USB port on your PC or on the Vega has gone up the swanee
3./ The USB lead is no good
The Vega may be unbrickable but if the back button or the USB port has had it then .....
Yeah, tried it, cheers.
Good evening...
I've had this problem for the past 5 days..i tried a new ROM but didn't like it so i went back to my original rom...but the phone after the recover stopped working..so i tried using the RSDlite to install another ICS to be able to start my device.,and after the installation was almost done,,RSD requested the phone to be restarted,,after that it completely died! nothing happens when i start the phone..no light..no screen light..just one thin..when i connect it to the charger or to my pc the white LED is on...but the screen stays black like its OFF..
I left the device on charger for TWO days..
I tried Vol UP + Power to get into the menu...
I took off the battery for ONE day,,,
NOTHING...just black screen with white charging led,,
when i connect it to my pc..there isn't even the notification sound that a new device is connected..
not even RSDlite is able to find the device...
Please help me...i've tried everything i know..some ppl might say recharge the batt,,as i said i left it on the charger for 2 days!
i don't know what to do next !
HELLO !!
wahoby said:
Good evening...
I've had this problem for the past 5 days..i tried a new ROM but didn't like it so i went back to my original rom...but the phone after the recover stopped working..so i tried using the RSDlite to install another ICS to be able to start my device.,and after the installation was almost done,,RSD requested the phone to be restarted,,after that it completely died! nothing happens when i start the phone..no light..no screen light..just one thin..when i connect it to the charger or to my pc the white LED is on...but the screen stays black like its OFF..
I left the device on charger for TWO days..
I tried Vol UP + Power to get into the menu...
I took off the battery for ONE day,,,
NOTHING...just black screen with white charging led,,
when i connect it to my pc..there isn't even the notification sound that a new device is connected..
not even RSDlite is able to find the device...
Please help me...i've tried everything i know..some ppl might say recharge the batt,,as i said i left it on the charger for 2 days!
i don't know what to do next !
Click to expand...
Click to collapse
While phone is off do the following:
1. Press volume down button and power off button both together till you see Android Robot with (!) Exclamation mark;
2. Now release both keys and press volume keys (both up and down volume keys together);
3. This will show you Stock Recovery;
4. Now from volume down key select "wipe Data" and execute it with power key;
5. Now select Reboot.
This will probably resolve the issue. However, if the issue still persists then you need to use RSD lite to flash your phone with the some Froyo SBF.
For more info: http://forum.xda-developers.com/showthread.php?t=1216982
[Note: To enter bootloader menu so that RSD lite recognize your phone you need to have its USB drivers installed on your system and while booting you need to press Volume Up key and Power key together while phone is off to enter Bootloader menu to flash with SBF.]
Hope this helps!!
ATB!!
wahoby said:
Good evening...
I've had this problem for the past 5 days..i tried a new ROM but didn't like it so i went back to my original rom...but the phone after the recover stopped working..so i tried using the RSDlite to install another ICS to be able to start my device.,and after the installation was almost done,,RSD requested the phone to be restarted,,after that it completely died! nothing happens when i start the phone..no light..no screen light..just one thin..when i connect it to the charger or to my pc the white LED is on...but the screen stays black like its OFF..
I left the device on charger for TWO days..
I tried Vol UP + Power to get into the menu...
I took off the battery for ONE day,,,
NOTHING...just black screen with white charging led,,
when i connect it to my pc..there isn't even the notification sound that a new device is connected..
not even RSDlite is able to find the device...
Please help me...i've tried everything i know..some ppl might say recharge the batt,,as i said i left it on the charger for 2 days!
i don't know what to do next !
Click to expand...
Click to collapse
Have you had enough battery when you were flashing the sbf/could it be possible, that the battery died during flashing process?
thanx 4 the reply,,but i have all the drivers installed on my pc,,and the phone won't start..i tried the Vol Down+ powe..nothing..Vol Up+ power nothing..Both Vol+ power also nothing..i left the phone on charger for two days..still nothing..when i try the RSD it doesn't find the device...even when i connect the phone to the pc..there isn't any sound to a new device is connected !! just the white led is on..but screen is always black nothing at all
i have used the RSD before and i know how to install roms using it..also i know how to go to boot menu or recovery menu..but right now i am unable to do anything
Try this:
http://forum.xda-developers.com/showthread.php?p=10264115
Why?
Cause a damaged OS, cannot charge your battery. you must pull your battery out of defy and charge the battery externally.
Or you buy a new battery, or let charge your old battery by a cellphone-seller, or asks a friend of yours with a defy to charge your battery for you etc.
Have u checked the voltage of your battery, it must be 4,1 V if the battery is fully charged.
I think esok44 is right your battery is empty, there is not enough power in it to start your defy.
i just tried the usb modification to connect it to the battery directly,,done all the steps as told ... nothing!!!
i'm really getting frustrated cuz its been like this for the past one week,,i've tried everything
don't have any friends with defy phone...
can't think of anything else to do but to brake the phone
well if everything fails, give it to motorola...
if it really is broken and everything fails, then try it.
would be the last option for me, but at least it is one...
But as is said, had the same problem and in may case it worked...
i've read on xda about an usb-manipulation to flash sbf when battery is empty, maybe you could try this...
I'll add a link to it
Link: http://forum.xda-developers.com/showthread.php?t=1489289
i have encountered this problem previously and the solution was replacing the battery, as RATTAR said the battery is not charged. try to charge your battery or try another charger, once it's charged rsd will recognize it. don't panic or despair.
Hello guys, first than nothing, sorry for my bad english, isnt my native languaje. I got this problem yesterday in the night of the new year!!!!!!!:crying: I was rooted, using Xylon and Faux Kernel, but the problem appears from nothing!!
The first thing that I detected was, the phone take a WHILE!!! for charge.... then, out of the power, the phone get overheating and discharging so fast, never in life that happends, when N4 got discharged i try to turn on again but download mode appers in the screen, finally I get in the recovery, then I did a wipe cache/system and factory reset. Install again the Xylon... but when phone finally turns off, when I plugged in to AC absolutelly nothing happends, the led just turn in red, and the N4 dont start in FB, dont get charge, dont do a sh*t !!!! I conect it to the PC but also nothing appends, the N4 doesnt appear in my device list.
So... my N4 its broken?
There was possibly something wrong with the kernel and rom combination that caused your phone to overheat. I think eventually the heat may have damaged your hardware. Sorry but, if something was wrong in the first place it was not a good idea to reinstall the same thing that was causing the problem, if I were you I would have flashed a stock ROM. My only advice now would be to RMA it and pray
EDIT: I found this if it helps at all:
If you are unable to access the settings menu of your device, you can still reset your phone by performing a Hard Reset. Here are the instructions:
If your phone is on, power it off.
Press and hold Power until the device powers on, then immediately press and hold Volume Down (while still pressing Power). You will see the word Start with an arrow drawn around it.
Press Volume Down twice to designate Recovery mode.
Press Power to restart into Recovery mode. You will see an image of an Android robot with a red exclamation mark.
While holding down Power, press Volume Up.
Use the volume keys to scroll to "wipe data/factory reset" and press Power to select it.
Scroll down to "Yes - erase all user data" and press Power to select it.
Note: If at any point during the above steps your phone becomes unresponsive, you can restart it by holding down the power button for several seconds.
Before you try anything else, try and leaving it plugged in for a while and then try turning it on. Or leave it plugged in to a computer then try turning it on.
joshnichols189 said:
Before you try anything else, try and leaving it plugged in for a while and then try turning it on. Or leave it plugged in to a computer then try turning it on.
Click to expand...
Click to collapse
Try this. I haven't had it happen to me, but I do have a friend who this exact same thing happened and he thought it was bricked. He left it plugged into AC over night, and in the morning it would turn back on.
First than nothing, thanks for reply, I appreciate your intentions to help me.
I will leave it charging all the night and while Im working too... I hope after that, the phone at least turn on.
I dont install the STOCK ROM because I dont have it in my internal memory and I was in my girlfriend house, the night of the 12/31/12, there is not much to do...
I did the same post, but a little bit more explained
Its here: http://forum.xda-developers.com/showpost.php?p=36165434&postcount=2708
(In case you want to know all details about this problem..)
And Thanks againf for your help!
got the same ****
have a look here
http://forum.xda-developers.com/showthread.php?t=2050811&highlight=bricked+
we are not alone with that problem
some more people have the same problem
i did not even overclocked or benchmarked..
read this post, maybe its helpfull for you
http://forum.xda-developers.com/showthread.php?t=2011328
battery
It could be bad battery, how long did bought of you had working phone, how many times did you charge?
Did you use out of the box charger?
Did you have problems with usb jack?
kibox said:
It could be bad battery, how long did bought of you had working phone, how many times did you charge?
Did you use out of the box charger?
Did you have problems with usb jack?
Click to expand...
Click to collapse
I bought it the 13/nov..
I received it 29/nov.
I ALWAYS use stock charger, only 1 time i try to charge it in my car, but it was less thant 5 minutes, I decided dont charge with the car because the energy variates when I accelerate...
After that, I use my phone quiet normal.
I had this problem with my nexus 7. I think my battery died all the way and it couldn't charge. The stick charger wasn't doing anything. But I plugged it into my computer for a few minutes and tried turning it on. Then when the loading screen appeared I ran it to it's stock charger and charged it to full. Your battery probably died. Try different combinations of ways to get it to take a charge. Just long enough to turn on then plug it into its charger. Though the overheating could have fried it
Sent from my SPH-D710 using xda premium
my att g2 4.2 rooted stock rom worked normally last night, this morning I plugged it into the car charger and it displayed it was charging with 2% charge present. I pressed the power button the boot animation began I set it down and when I picked it back up a few minutes later to use it...well nothing...the charging indicator led wasn't lit and when I pressed the power button LG appeared for only a split second then went black. when I plug it in same thing, LG logo for a brief second then disappears. I haven't done anything recently except xposed modules, no flashing of anything. any ideas? thank you guys
It happened to me (on other devices) when I let them discharged too far. Just allow it to charge awhile then try to hold the power button
for 10-20secs ... The NookHD+ were the worst in this situation (it won't charge sometimes, I had to plug/unplug a few times to initiate a charge, I was almost about to RMA one of them).
something else that's odd
when I plugged my device into my laptop the laptop acted like I just plugged in 12 different things that all needed to have their disk formatted. what is going on? wierd
pollutedmuse said:
when I plugged my device into my laptop the laptop acted like I just plugged in 12 different things that all needed to have their disk formatted. what is going on? wierd
Click to expand...
Click to collapse
try charging the device in offline mode ( turn it off and let it charrge for a while) and then turn it on . mind wouldnt turn on because of very low charge yesterday. doing this helped
update
I let it charge for several hours, nothing...it appears to be in some kind of boot loop. I can't turn it off all the way, I hold the powwer button for tensec or so and the LG will appear for a second then disapear and then the back light stays on. oh ya, when I plugged it in a few hours ago it wouldn't turn on but the red LED was flashing. I'm not sure how long it stayed on, but it was off when i got back to it several hours later. thank you for your time fellas!
If you can get to recovery at all, leaving it on charge in there. Has saved me in a similar situation.
shriom_manerker said:
try charging the device in offline mode ( turn it off and let it charrge for a while) and then turn it on . mind wouldnt turn on because of very low charge yesterday. doing this helped
Click to expand...
Click to collapse
Could have been the power switch that makes the phone short circuit and goes off anytime.
Sent from my LG-D801 using xda app-developers app
Thank you sirs, unfortunately still no good
it sounds like you had the same thing as everyone else yesterday that had twrp installed and the carrier automatically updated the system.
I could not get my phone recognized by the laptop and had to use pdanet drivers, which finally worked, but I still had to dig for the device. then had to flash back to stock. There is a pretty good thread on this topic, already. Search for it in the developer section. Do not skip any steps, such as setting the date back to jan2012 and turning off the internet. go slow and methodically, or you will miss a step and get frustrated.
Hello.
When I try to turn on my N4, I hold power button, and after about 10 seconds Red light blinks (just once, if it's connected to USB that 1 blink last for 3 seconds, if connected to wall, it's just quick 1 blink. If it not connected anywhere there is no action at all, it just stays dead, no blinks, nothing). Same if I try to go in bootloader by holding volume down+power.
This happened after I successfully installed CM12, with no errors. Then I rebooted my phone, and it just stayed black as it is now. Battery was around 25~30% that time, and phone was connected to USB.
Did I bricked my phone totally? I am now trying to charge it up already for 1 hour... but it nothing changes.
I have searched here for similar problems, but couldn't find solution...
Edit: Charging already for 10h+ , still same..
Edit2: I removed battery, reconnected after a while, still same problem.
So I tested it with multimeter, it says 2.6V, but fully charged must be 3.8V. Could this be a problem? I was charging it for whole night.
Edit3: I just got new battery . But it looks the same.. phone doesn't boot up.. same red light blinks once.. so.. its my phone is dead? I can't believe that...
When I connect to PC usb, there are unrecognized deviced called "QHSUSB_DLOAD".
easy fix
Hold down the power button and the volume down button at the same time until phone reboots. If you see the little android no need to worry just let go and wait for your device to reboot on its own. This is not a factory reset it's just like restarting your device. :good:
zelexon said:
Hold down the power button and the volume down button at the same time until phone reboots. If you see the little android no need to worry just let go and wait for your device to reboot on its own. This is not a factory reset it's just like restarting your device. :good:
Click to expand...
Click to collapse
I have tried that many times. Nothing. It's bootloader screen, but I can't get there. Nothing happens. If I keep holding volume down+power it just keep blinking once every ~10 seconds, same if I hold just power button. If phone is not connected to charger, there are no blinks at all.
I removed battery, reconnected after a while, still same problem.
So I tested it with multimeter, it says 2.6V, but fully charged must be 3.8V. Could this be a problem? I was charging it for whole night.
Cracken6 said:
I removed battery, reconnected after a while, still same problem.
So I tested it with multimeter, it says 2.6V, but fully charged must be 3.8V. Could this be a problem? I was charging it for whole night.
Click to expand...
Click to collapse
I had the same problem a year ago, I tried to remove the battery, charging all night, and other solutions that I found online and no one worked.
Finally I found here in XDA a user with the same problem and his solution was charger the phone with a wireless charger, a friend of mine has one and I put the phone to charge and after a few minutes the screen goes on and the phone was charged, then I press power button and the nexus run again.
Hope this works.
Sorry for my bad English, I'm from Spain.
Good luck.
(I bought a wireless charger in case it happen again)
I don't know anyone with wireless charger. I already ordered a new battery, and then I probably will get wireless charger also. Ty.
But this problem is very weird if you think so.. I think it happened because of many aspects together:
1) Battery was already below 30%
2) I pretty regularly charge phone with USB (won't do it again)
3) It was connected to PC USB in same time.
4) I installed CM12 ROM in same time
So main reason I think is USB, that I restarted phone while it was on pretty low battery and with USB connected.. phone restarted and got invalid voltages and couldn't even boot up or charge phone. I also found an article which says, minimum voltage, when phone battery has 0%, it's 3.0V, so I was below that.. it just screwed everything and battery died. Well, I am not sure for 100% that it's battery fault, but I hope so, I really love my N4 and still wanna use it for long time, I hope it's not dead phone, just a dead battery. Lets see! I will update this thread , when I get my new battery (less than month probably).
Sorry, my english is also not perfect. I am from Latvia.
I was playing when it happened to me. The phone was very very hot and the battery was around 70%. When I put in the wireless charged and I can reboot the phone the battery was at 65%, so it had charge but the phone won't boot.
I charge my phone almost every day, sometimes with AC, others with USB (plugging to PC) or wireless that depends of my needs
I hope you can fix it. Good luck.
Btw. Do you know if battery charges with wireless charger, if it's removed from the phone?
Don't think it does, since the receiving coils for wireless charging are located just behind the glass back.
Flipz77 said:
Don't think it does, since the receiving coils for wireless charging are located just behind the glass back.
Click to expand...
Click to collapse
The battery will charge with a NCF Charger
Major Issue Google
This "Nexus SOD" issue is showing up on many sites across the Internet. I have multiple "Nexus" devices including 2 Nexus 4, 1 Nexus 5, 2 "Nexus 7 2013". It suddenly started out of the blue with one of my Nexus 4 phones. Symptoms included rapid battery discharge. I am using Lollipop 5.1 on all devices. There are many claims as to the cause, Hardware Motherboard, Power Button etc. Others claim it is "Software Related" or App Related. The problem effects Nexus 4 and Nexus 5 phones. I have ordered a new motherboard for my nexus 4 device and see if that makes a difference.
This problem should warrant a "Major Android Lollipop Crisis Team" by Google to investigate the cause and let us know what it is and what Google is doing to solve the problem before moving to announce "Android M". This issue needs to brought up and actively pursued at the upcoming "Google I/O Conference" by the strong Android Developers Groups to press for "Formal Action"
charging method
Cracken6 said:
I have tried that many times. Nothing. It's bootloader screen, but I can't get there. Nothing happens. If I keep holding volume down+power it just keep blinking once every ~10 seconds, same if I hold just power button. If phone is not connected to charger, there are no blinks at all.
Click to expand...
Click to collapse
I had this problem a long time ago and my fix worked for me after doing a little research it seems like this is a case called battery total discharge. The fix was simply to charge your phone using the wall adapter that came with your phone (I still use my old apple cube wall thing) and to wait for the red light to appear then wait about ten minutes before trying to reboot.
I just got new battery . But it looks the same.. phone doesn't boot up.. same red light blinks once.. so.. its my phone is dead? I can't believe that...
When I connect to PC usb, there are unrecognized deviced called "QHSUSB_DLOAD".
Maybe this video will help you: Oh I´m not allowed to post links until now.
Just search for: - Nexus 4 "red light of death" fix - at youtube.
Hope it will help
AndRe5575 said:
Maybe this video will help you: Oh I´m not allowed to post links until now.
Just search for: - Nexus 4 "red light of death" fix - at youtube.
Hope it will help
Click to expand...
Click to collapse
I have checked all kind of videos there. Also that one. Most of these cases are related to battery, but it seems in my case it isn't. I just searched for QHSUSB_DLOAD unrecognized device, all posts says it means phone is bricked... But cmon, how? I installed CM12, successfully, without any errors, then just restarted phone, and its dead...
Cracken6 said:
I have checked all kind of videos there. Also that one. Most of these cases are related to battery, but it seems in my case it isn't. I just searched for QHSUSB_DLOAD unrecognized device, all posts says it means phone is bricked... But cmon, how? I installed CM12, successfully, without any errors, then just restarted phone, and its dead...
Click to expand...
Click to collapse
Did u try booting the phone without battery by connecting to wall charger and what about flashing stock ROM via PC
Also check that the power button works
This case should be solved
as9333 said:
Did u try booting the phone without battery by connecting to wall charger and what about flashing stock ROM via PC
Also check that the power button works
This case should be solved
Click to expand...
Click to collapse
Just tried booting without battery, and connecting to wall. Same - red light blinks once, after I hold Power button or Power+Volume down for about 15 seconds. If I keep buttons pressed, it just repeats every ~15 seconds.
Power buttons works fine.
After I checked that Device manager thing in google.. it looks very bad.. phone is dead.. probably need to change motherboard. I am just shocked, how this could happen... I didn't receive any errors during CM12 installation. Phone just instantly died after restart.