Hey!,
So Ive been trying to update to this ROM for some time now (coming from miui elite 9.7) but whenever I try I always seem to have bootloop problems. The first time the rom successfully installed and was working perfectly for about a day until I tried to reboot it and it didn't boot back up (stuck at the white huawei screen). So I booted into recovery and flashed the rom again...didn't even boot this time.
Recently, I flashed PaulMillbank's (think that's it??) version of the X1 elite rom w/ market including his custom kernel and it worked for about 2 days until it froze...went into reboot...but didn't boot back up...again \(>_<)/
I'm on the .32 kernel and yes I followed all the correct steps Thanks if anyone could help me, really liked that rom.
Sent from my u8800 using XDA
Related
Guys,
So if am reposting the same query. Tried searching but didnt get any result.
I'm using GalnetMiui ICS as my primary rom. Saw this thread about multiboot and tried it. v0.4 didn't boot from 2nd boot. So i installed the old version v0.3 .. I could flash CM9-ICS-MR0-111207-jordan-KERNEL-2.3.4-Quarx and update it to CM9-ICS-MR0-111211 .
But now i'm not able to boot from 2nd init !
I tried doing the whole thing again starting from installing MIUI then applying multiboot patch and then installing CM9 ... but in vain.
Please help me get through.
NB: i noticed one more thing, running cm9 in 2nd boot is not giving me any network, when i try searching for a network its shows some error.
vsvj said:
Guys,
So if am reposting the same query. Tried searching but didnt get any result.
I'm using GalnetMiui ICS as my primary rom. Saw this thread about multiboot and tried it. v0.4 didn't boot from 2nd boot. So i installed the old version v0.3 .. I could flash CM9-ICS-MR0-111207-jordan-KERNEL-2.3.4-Quarx and update it to CM9-ICS-MR0-111211 .
But now i'm not able to boot from 2nd init !
I tried doing the whole thing again starting from installing MIUI then applying multiboot patch and then installing CM9 ... but in vain.
Please help me get through.
NB: i noticed one more thing, running cm9 in 2nd boot is not giving me any network, when i try searching for a network its shows some error.
Click to expand...
Click to collapse
It is not possible to run newer versions including 111207 in multiboot due to the new kernel.
you need to make this your primary boot
hope i could help you, greetz Esok
sadly understanding the truth.
Yes , i sadly am understanding it. But I've found out a dumb method to use dual boot. Flash the respective kernels when in need of switching from GMIUI to ICS CM9.
but still the CM9 ICS is not giving me any phone signal [in 2nd boot], i dont have any sim pin activated.
If i make CM9 my primary rom , phone signal is ok and i can make / recieve calls. ??
For now i need Galnet Miui as my primaryu ROM atleast until the ICS CM9 is officially released for Defy...
cm9 is my primary rom and everything works great, at this moment i'm on the phone
maybe you could just make a nand backup of your wajkiui and flash cm9.
if everything works you can keep cm9 and if not just flash back
greetz esok
Hi everyone,
I was trying to post this in another thread but I'm unable to post in the Development sector.
I have a Motorola Defy+ running the Android 2.3.5, I've tested the following ROM's:
CM9 by quarx
CM9 by Epsylon
Both runs just fine, but I was thinking this weekend to test another rom's to have new experiences and found out about the MIUI, which seens to be a very good rom.
But the fact is that I'm facing some troubles trying to run this rom.
Everytime I try to apply it, the Recovery says to me that the install went ok, but once I reboot the phone, I got stuck in the Motorola Bootloader screen, and I have to flash a stock SBF again.
I've tried the STABLE (GB) and the BETA (ICS), both got the same problem.
Different versions of 2ndinit (1.4, 2.0, 2.3).
Does anyone know why I'm having this problems?
I would appreciate any help.
Best regards,
AFAIK, MIUI requires Froyo kernel and Defy+ has GB kernel.
Evolution-VII said:
Hi everyone,
I was trying to post this in another thread but I'm unable to post in the Development sector.
I have a Motorola Defy+ running the Android 2.3.5, I've tested the following ROM's:
CM9 by quarx
CM9 by Epsylon
Both runs just fine, but I was thinking this weekend to test another rom's to have new experiences and found out about the MIUI, which seens to be a very good rom.
But the fact is that I'm facing some troubles trying to run this rom.
Everytime I try to apply it, the Recovery says to me that the install went ok, but once I reboot the phone, I got stuck in the Motorola Bootloader screen, and I have to flash a stock SBF again.
I've tried the STABLE (GB) and the BETA (ICS), both got the same problem.
Different versions of 2ndinit (1.4, 2.0, 2.3).
Does anyone know why I'm having this problems?
I would appreciate any help.
Best regards,
Click to expand...
Click to collapse
MIUI is a froyo based ROM.
Downgrade to froyo if you need to flash it..
Sent from my Defy+ using Tapatalk 2
hello guys i'm from slovenia so and i don't know very well english to apologise
i have a big problem with my huawei i installed the cwm and wiped then i try installed cyanogenmod 9 but there was a problem installation was not successfully i was very confused so i downloaded the original 2.3 firmware from huawei.com and i paste orginal boot.img and recovery.img in pink screen then i try to instaled it but i've have pitcs but why i followed the instructions ( i formated the sc card and paste the rom in it) and then is a warnig whin an triangle update failed
so can anybody help me and tell me what can i do to fix this
Thank you !!!
wowww,wait a little.where did you find a cyanogenmod 9 rom? was it from another phone? if yes,maybe that's why the installation failed.
also,everything else you did was kinda wrong
i bet you can only try installing the official 2.3.5 firmware following the instructions included in huawei package and after that if the phone boots up correctly there are a lot of users here(including me) willing to help you
it was for this phone for the pro version and everything so what are is you'r proposal to do here ? can you give me please an custom (clockword and root images that you use and a rom that actually works i've have the pro version
Thanks !!!
I have the pro version too. I think I can help you.
Well the cwm I use is this one: http://sourceforge.net/projects/genoandroid/files/recovery5.0.2.7_en_u8800pro.img/download
Geno made it so big thanks to him
As for working Custom Roms check the U8800 Pro Android Development Section,try any ROM you want and just stick with the one that suits you better Be sure to try out aurora(from sakura), kalo rom, gkalenis rom(it has tv-out) and if you can my roms
Anyway.Try using the custom recovery.img I gave you with the boot.img from the rom you flashed(if the phone boots you are good to go). If the phone doesn't boot reinstall official firmware
so if i understand you for example i just downloaded you first rom and recovery that you gave me now i replace the recovery and that boot.img that is in MoihackB572GBFinal.zip ?
almost.replace with the boot.img from the cm9 rom you flashed previously(it's inside the zip file)
sorry i didn't make this clear
make sure the phone boots after replacing those files in pink screen. if it boots correctly everything else is pretty easy. the important thing here is to get your phone work again
Moihack you'r a genius it actually works and i lied it wasn't cm9 it was cm7 from geno ''cm-7.2.0-u8800pro-Geno-120604-final'' it's chinese-english but it works. so i have a question now which rom do you advise me and thanks a lot !!!
well glad i was able to help! you are welcome
my 2nd rom is based on the cm7 you tried but is free from all apps(only basic ones left) and is actually a pretty small one(about 60mb).you can try it if u want to
now the roms i like is the aurora ics from sakura(it is pretty stable and fast for ics) and horse absolute (made by gkalenis). horse rom also has tv-out option but you have to downgrade to 2.2,re-root,install cwm and flash it in order to work properly(otherwise camera use will cause reboot of the phone).
anyway.if you like ics,feel free to try aurora (don't try the official ics from huawei yet)
if you want froyo and tv-out go with horse rom
if you like gingerbread,well try my roms
btw i am cooking another 2 roms these days(a mokeeOS and a miui 2.3.30 ) so keep an eye on u8800 pro development section if you want
Hi, Guys Im A rom tester since 2 weeks I Installed Some Roms Like Lineage Os,Aosp,FireHound Rom But After Installation Phone Boot But Touch Did Not Working.....
As far as i know the touch screen doesn't infects by installing other ROM's, it's a kernel that does infects. I think it's a hardware issue. Try to flash the original Mi A1 from the original site : http://en.miui.com/download-333.html
farokhan478 said:
Hi, Guys Im A rom tester since 2 weeks I Installed Some Roms Like Lineage Os,Aosp,FireHound Rom But After Installation Phone Boot But Touch Did Not Working.....
Click to expand...
Click to collapse
Flash meta kernel
Hello !
Has anyone actually managed to get any custom ROM to work on a Samsung Galaxy A40 SM-A405FN/DS ?
Mine is currently running the current latest stock ROM (SM-A405FN_2_20211030045838_jg43vcqbiw_fac) downloaded with Frija and I managed to install TWRP from here : https://forum.xda-developers.com/t/recovery-a40-teamwinrecoveryproject-3-6-x-unofficial.4364575/
However, ANY custom ROM that I try to install :
https://forum.xda-developers.com/t/a11-r-arm64-a40-lineageos-18-1-unofficial-by-kevios12.4335409/
https://sourceforge.net/projects/eurekaroms/files/Samsung/A40/R/lineage/
GSI
maybe others that I forgot
will either bootloop or end up with a black screen.
Looking at the following threads, I'm starting to wonder if the SM-A405FN/DS is custom-ROM-compatible at all ?
https://forum.xda-developers.com/t/help-my-a405fn-wont-boot-any-custom-rom.4337041/
https://forum.xda-developers.com/t/samsung-a40-black-screen.4354421/
https://forum.xda-developers.com/t/galaxy-a40-infinite-loop-impossible-to-turn-on.4337343/
Im running CrDroid 7.13 without any issues with root and gapps. Many custom roms bootloop because of your newer firmware with Bit/SW REV.
Security Patch Lvl. being 4 and those custom rom were built on the older firmware with probably patch level 3. I had installed DotOS fan edition fully working like a year ago, then I tried some new custom roms, which somehow broke my system so the system couldnt start up even after reflashing original boot image, so I reflashed to the newest firmware which was working, then I tried flashing older one and it wouldnt boot, it just shows black screen with error bit/sw 3 boot 4. So you have to flah roms, whose are built on the newer bit level to boot up, the best is CrDroid and now the newest ALT-F4 version 0.0.3 from this forum: https://forum.xda-developers.com/t/rom-oneui-3-1-a40-alt-f4-v0-0-1-updated-2021-12-18.4373813/
I tried it myself and it is the best for this phone, it is fully debloated and pre-rooted stock rom. I also tried CrDroid 8x, everything works for me, but it fells slow and the ram is almost maxed out. I also recommend upgrading to this TWRP: https://forum.xda-developers.com/t/recovery-official-twrp-for-galaxy-a40-a405fn.4025587/
The unofficial twrps had some bugs for me. I hope this helps and happy flashing!
THANK YOU for your comprehensive reply !! I'll give ALT-F4 a try as soon as I can !
breversa said:
THANK YOU for your comprehensive reply !! I'll give ALT-F4 a try as soon as I can !
Click to expand...
Click to collapse
Good luck!
Well, luck has not been enough: after updating TWRP to the official version, I tried yesterday to install ALT-F4 0.0.3 but got the exact same result: black screen, need to reflash the stock ROM to make it boot (even to recovery !!) again.
Would you have any other idea ?
EDIT:
I actually tried crDroid in the past, to no avail either.