Kept trying to install either the new ICS leaked ROM for 501 or CM9, so I've followed the steps here for installing a custom bootloader. Thing is the ROM I had installed didn't work, being one of the two above. Anyway, I got into APX mode and followed the steps in the thread, only that didn't load up recovery anymore (I had one of thor's). What I did next was to try and fix it somehow by flashing some other things via nvflash, it said it formatted partition 4, I believe.
Short of it, now when I press power I see a brief flash of the Acer logo and that's about it.
Any help would be appreciated.
and yeah, the second time around i used this.
sorry, i'm an idiot. for some reason there was a battery drain.. i can boot into recovery no problems
Related
i hope im posting this in the right place, ive never really messed with forums before, but anyways
ive done everything there is to do to get a custom rom on my streak (StreakDroid) including the whole flash recovery, when i do that it all seems like its working, but when i go to where you are supposed to install the streakdroid (when you turn your phone on with both volumes ect) soo when i get the screen with the blue letters, its tottally different it says something like "insert a SD card containing an update file(/sdcard/update.pkg and the only choice it gives me is press up on the volume to turn device off. BTW i did already had the streakdroid on my sd card. someone please HELP me
if this helps i have a Dell Streak from AT&T
V 2.2
Baseband Ver. 2.6.32.9-perf
OEM Ver. GAUSB1A135331
Build 15697
Thanks
Sounds like this might help.
You may also want to read this.
i already know all of this, but thanks for trying, i cant root it eather, i forgot to mention, it keeps failing, and ive tryed all versions of oneclick
Do this - you do not need root to use that method and is you read the previous links I posted you will figure out how to use StreakMod Recovery even if you aren't rooted.
I got same problem when I installed custom rom at very first time from stock 2.2.
Do this if still can boot to stock rom..
1) Rooting with Gingerbreak.apk , this will work..
2) After rooting done, use R.E and change one file in the system as this file automatically blocked custom recovery when reboot so your problem happened... your DS5 still booted on stock recovery even already flashed StreakMod recovery...
Read this.
3) After modifying one system file then flash StreakMod recovery then you can continue....
Hope this can help you.
i tried that too, but like ive said when i first made this post, when i go into streakmode (when i turn it on with both volume bottons ect) and go into mode after that all i get is something like for an emergency restore blah blah , idk whats wrong, ive done the streakmod right and still,
i have att 2.2 rom it wont allow me to install other source apks
Regarding the issues faced by the OP on this thread:
1. If you are seeing mention of an update file when trying to access StreakMod Recovery, then you let the Streak boot regularly once you installed StreakMod, rather than immediately booting into StreakMod Recovery. If you let the Streak boot normally, StreakMod Recovery gets overwritten. If you're trying to install StreakDroid, then you need to hold down volume down and up as soon as you finish flashing StreakMod Recovery via Fastboot to use it.
Custom ROMs do not have the problem with recovery images being overwritten.
2. The recommended method of rooting a Streak is to flash StreakMod Recovery and then flashing Superuser.zip through it. One click rooting methods are not 100% reliable. The OP is attempting to flash a custom ROM, which doesn't require flashing Superuser.zip. It DOES require flashing StreakMod Recovery.
3. AT&T was supposed to permit sideloading on newer AT&T ROMs. Go to Settings>Applications and make sure "Unknown Sources" is checked. If the option is not present in the ROM, then either the ROM must be changed or a PC application such as the Sideload Wonder Machine must be used.
OP, you were attempting to change the ROM to StreakDroid. Did you change your mind?
@Strephon Alkhalikoi man, just when i thought all hope was lost, your 1. step did it all thank you sooooooo much for finally having my problem solved
also thanks to marvin02 and androidunia for trying to help me, i appreciate it
Hit the thanks button next to my post, Marvin's post, and androidunia's post if we helped out.
taylorgang809 said:
@Strephon Alkhalikoi man, just when i thought all hope was lost, your 1. step did it all thank you sooooooo much for finally having my problem solved
also thanks to marvin02 and androidunia for trying to help me, i appreciate it
Click to expand...
Click to collapse
Gee - the same info was available from my first post in this thread. All you had to do was click on a link and actually read. If you had you would have had the answer less then an hour after your OP.
marvin02 said:
Gee - the same info was available from my first post in this thread. All you had to do was click on a link and actually read. If you had you would have had the answer less then an hour after your OP.
Click to expand...
Click to collapse
+1......right !
Hello!
I was about to unroot and get back to stock with my A500 so I flashed a stock ROM via CWM to get a ota-update. Before i had a custom ICS ROM installed and now I installed a HC stock ROM. The problem is that i forgot to go through the wipe menu in CWM before the flash and now when I start up my tablet I first see the ACER logo as usual, then a android text-logo which the tablet is stuck at. I've waited 20 minutes and is still shows the same thing. The logo has an animation which i still can see. I've tried to restart the tablet and get into CWM again without succes.
I have read diffrent threads for several hours but I can't find my problem. What should I do? :crying:
what does the android text say?
Hi dibb_nz.
It is the bootanimation from what I gather (Video; http://s1142.photobucket.com/albums/n602/JdgM3NT4L/?action=view¤t=AndroidBootanimation.mp4). I am trying to help someone get a tab up that is doing the same thing as well. The weird part is that recovery is good, bootloader passed (V8), wiped data/cache/system. Tried three ICS roms so far, and every one is stuck at the bootanimation. About to go bonkers trying to figure it out. The only thing that I can think of to try next is changing CWM from Thors to TWRP or something...
To Webspirit, your problem will most likely get fixed by using blackthund3rs APX Tool. Google it and then goto the forum where it is. There's plenty of support for getting that going and you shouldn't have any problems. If you do holler. Alot of us have had to use that tool and can help. I am hopeful that yours will be as simple as downloading and installing recovery back and flashing a nice rom.
Yeah i agree with the guy above me, your going to have to flash something from apx
Sent from my A501 using xda app-developers app
JdgM3NT4L said:
Hi dibb_nz.
It is the bootanimation from what I gather (Video; http://s1142.photobucket.com/albums/n602/JdgM3NT4L/?action=view¤t=AndroidBootanimation.mp4). I am trying to help someone get a tab up that is doing the same thing as well. The weird part is that recovery is good, bootloader passed (V8), wiped data/cache/system. Tried three ICS roms so far, and every one is stuck at the bootanimation. About to go bonkers trying to figure it out. The only thing that I can think of to try next is changing CWM from Thors to TWRP or something...
To Webspirit, your problem will most likely get fixed by using blackthund3rs APX Tool. Google it and then goto the forum where it is. There's plenty of support for getting that going and you shouldn't have any problems. If you do holler. Alot of us have had to use that tool and can help. I am hopeful that yours will be as simple as downloading and installing recovery back and flashing a nice rom.
Click to expand...
Click to collapse
hi J...ok thats cool re boot anim...i asked becoz like u i been trying to help a couple of others who can't use any of the flash tools or roll back to HC...i only just got myself fixed after being stuck in apx, no recovery, and boot screen saying in red text "reboot device" thought he may have had similar issue....
J...have u used nvflash or apxflash to roll back - theres a few folks getting stuck with it...its loading the HC apx driver which aint working with the ics bl so then yr tab gets stuck in apx!!!
I started a new thread hoping someone can help us all out be great to hear yr thoughts on this....its driving me up the wall
sorry didnt mean to hijack the thread
I can list any number of things that I've done/tried, but there have been so many! I'm not a noob when it comes to flashing ROMs, but I'm a new to the Acer Iconia Tab A500 and that's the problem, I think.
Anyway, I got the A500 with Honeycomb and I let it do the ICS OTA. No problem. Then I rooted it. No problem. I got to here: http://forum.xda-developers.com/showthread.php?p=31546261#post31546261
Then I decided to change the bootloader and that's when I borked something up. It would still boot into ICS just fine, but I couldn't get into recovery. I decided to try downgrading to Honeycomb 3.0.1 using the "unstable" update.zip, but that just ruined everything as now I'm completely stuck. I can't boot at all, it just hangs at the black screen with white Acer letters and red "boot verification failed" in the top left corner. Recovery gets me the dead Android image with the black exclamation point in a red triangle.
I have looked all over and I've read dozens of XDA threads...and I'm sure I'm missing the one thing I need to do to fix this, but heck if I know what it is. I have the Acer drivers installed on my computer, I have a variety of tools (nvflash, blackthund3r's apxflash, etc) waiting to be used if necessary.
So, please, I implore you...treat me like I'm dumb and walk me step-by-step through whatever it is I need to do to get my A500 back up and running! Thanks for your help!
UPDATE: Many hours later, I fixed it! I did another update using the full, stock image of Acer_A500_7.006.01_COM_GEN2 (just guessing about whether it would work or not) and it seems to have done it. Sure, I'm back on Honeycomb 3.2, but it worked. And then I was able to use AfterOTA to root and get the CWM bootloader on there.
So my next question: what do I need to do in order to get ICS? Can I just flash an ICS ROM from CWM, or do I need to update the bootloader in some way?
Thanks!
moonlightinwhite said:
I can list any number of things that I've done/tried, but there have been so many! I'm not a noob when it comes to flashing ROMs, but I'm a new to the Acer Iconia Tab A500 and that's the problem, I think.
Anyway, I got the A500 with Honeycomb and I let it do the ICS OTA. No problem. Then I rooted it. No problem. I got to here: http://forum.xda-developers.com/showthread.php?p=31546261#post31546261
Then I decided to change the bootloader and that's when I borked something up. It would still boot into ICS just fine, but I couldn't get into recovery. I decided to try downgrading to Honeycomb 3.0.1 using the "unstable" update.zip, but that just ruined everything as now I'm completely stuck. I can't boot at all, it just hangs at the black screen with white Acer letters and red "boot verification failed" in the top left corner. Recovery gets me the dead Android image with the black exclamation point in a red triangle.
I have looked all over and I've read dozens of XDA threads...and I'm sure I'm missing the one thing I need to do to fix this, but heck if I know what it is. I have the Acer drivers installed on my computer, I have a variety of tools (nvflash, blackthund3r's apxflash, etc) waiting to be used if necessary.
So, please, I implore you...treat me like I'm dumb and walk me step-by-step through whatever it is I need to do to get my A500 back up and running! Thanks for your help!
UPDATE: Many hours later, I fixed it! I did another update using the full, stock image of Acer_A500_7.006.01_COM_GEN2 (just guessing about whether it would work or not) and it seems to have done it. Sure, I'm back on Honeycomb 3.2, but it worked. And then I was able to use AfterOTA to root and get the CWM bootloader on there.
So my next question: what do I need to do in order to get ICS? Can I just flash an ICS ROM from CWM, or do I need to update the bootloader in some way?
Thanks!
Click to expand...
Click to collapse
Yes and No.
Now that you are on HC 3.2, you're going to need to do the process again.
IE: Unlocked Bootloader and CWM
The problem you had at first, is that when you flashed the UNL bootloader and CWM, you missed 1 tiny step. (lot of people forget to do this) And that is to delete the boot-recovery.p file from the /System. If you do not, you can install CWM, however, when you boot into stock ICS, your CWM gets overwritten. Another little trick from Acer
In the Dev Section, in the stickies part, Civato posted a link to a full ICS Stock Root Rom, With all the nasty stuff removed. (bootloader, recovery files). Download it, put it on your Ext Sd card.
http://forum.xda-developers.com/showpost.php?p=31572588&postcount=6
Then do the unlocked bootloader + Cwm again. Only THIS TIME, when it finishes, boot the tab immediately to CWM (vol- and PWR). And install the modified stock rom, or one of the custom roms.
Don;t forget to get your HC UID number written down before starting the process. Also it's good after ICS to get your ICS UID number also written down.
MD
Hi there!
I own an Acer Iconia A500. Originally came with HC3x, updated it all the way to ICS. Rooted it at ICS with this method:
http://forum.xda-developers.com/showthread.php?t=1546593
Worked fine. The only issue is accessing Recovery at boot. (Just in case I plan on restoring the Stock version of Android, for warranty).
I first used the Acer Recovery Tool app at the Play Store. I tried one of the Recovery options listed. CWM for start. Backed up as asked, then rebooted into recovery. I was told "recovery verified failed". Did a restore, tried another method, same crap, with a time the bot with the (!) appears. Did some research on the issue, and came up to this thread:
http://forum.xda-developers.com/showthread.php?t=1622425
I did option 1 (Afterota v1.09). And flashed Recovery Twp 2.1.3/Bootloader.
I reseted back to bootloader, it didn't show "Recovery verified failed", but instead I got the bot with the (!) again. Went back to Acer Recovery tool. Bottom shows that its unable to identify the installed recovery. So I tried TWRP 2.1.3, didn't work.
My question is, how can I get this to fix? This is my first time trying to install a bootloader. Please help me step by step to get this situation fixed. I appreciate the help by any!!
i am having the same issue and have tried several different fixes without success... any suggestions would be greatly appreciated!
(the only one I haven't tried yet is 'manual flashing' outline here http://forum.xda-developers.com/showthread.php?t=1622425... will give this a shot when I get a chance and report back... from all the 'automated' or gui methods it always seems to get stuck at the flashing/copying stage...)
thanks!
Same issue...
Glad I'm not the only one with this issue... Used the exact methods you did, same results. Amazing!
i think part of the problem may be that the bootloader was not unlocked when the initial recovery was flashed? when i rooted i thought I had properly unlocked the bootloader as well, but perhaps not....? (... i thought i read somewhere that if the bootloader has not been unlocked when you flash recovery these are the results.. so i am assuming that this might have something to do with the issue?)
the question is, is there a fix?
i have been playing and experimenting more on the tf101 side... all the stuff i'm doing with this is for my wife's a500 because she liked some of the features on my tablet... i'm not all that familiar with the A500 (didn't have to deal with bootloaders separately on the tf101) so any help is greatly appreciated!
thanks!
Alright. I seem to have got it all fixed. What I did was, went back to this page:
http://forum.xda-developers.com/showthread.php?t=1622425
Went to the "Automated flashing tool" / "USING blackthund3r ATX flash tool , It makes it all a little easier !" Method (below Option 2, in the middle). Downloaded V8-TWRP_2.1.3_ICS_recovery.a500apx and APX-FLASH-Tool & Manager, and followed the instructions.
It didn't work with Windows 8 RTM, (driver issue with APX), but Windows 7, worked perfectly, after downloading the Acer driver from a link in the app when prompted. All worked well.
hope u guys got sorted....
for others reading this
to install recovery from ICS you must first flash the unlocked boot loader, after that u can use Acer recovery installer, although once unlocked most of us use fast boot or the auto tools to do it
A couple weeks back I deleted the OS off of my phone while messing with TWRP recovery trying to install a custom ROM. I looked around the forums and i got my phone to the point where It booted into a stripped down version of android with stock recovery on it, although everything was mirriored and backwards. But when i tried to install the stock rom for my LeEco S3 with stock recovery it got stuck i a boot loop and I couldn't turn off the phone or boot into recovery or anything. So i let it keep booting until it ran out of battery and died. So then i decided i would put the stripped down version back on and start again.
So I went back to my sp flash tool and reinstalled all the partions except the boot and recovery partitions (according to the steps on the forum) but my phone still wont boot into anything, it is completely black and wont boot into recovery or fastboot, and im running out of ideas on how to fix this phone :crying:
After pretty much giving up all hope of fixing my phone, i figured i would try the format option in the flash tool and then reinstall all of the pattitions. I selected format all flash, not doing proper research first, and now i cant even reinstall partions, I get a STATUS_BROM_CMD_SEND_DA_FAIL error anytime i try to flash the partitions.
can you at least get the phone to fastboot mode?
microMXL said:
can you at least get the phone to fastboot mode?
Click to expand...
Click to collapse
No I cannot, The screen is completely black and nothing comes on at all if I hold down the power button.
well damn, looks like a soft brick, it can be repaired but not gonna lie, it is a pain in the butt...
https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937
the guys have made an awesome guide on that thread.
microMXL said:
well damn, looks like a soft brick, it can be repaired but not gonna lie, it is a pain in the butt...
https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937
the guys have made an awesome guide on that thread.
Click to expand...
Click to collapse
I have already looked through that thread, and i have done everything up to the flashing process, and then I get a STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003) Error. I looked it up but the only option I haven't tried to solve the issue is to remove the battery, which i cannot do currently because to remove the battery you need a heat gun to remove the screen to get to the rest of the phone. I think I've given up all hope on fixing this phone and may just begin saving for a new one.
Sgt.Collywobbles said:
A couple weeks back I deleted the OS off of my phone while messing with TWRP recovery trying to install a custom ROM. I looked around the forums and i got my phone to the point where It booted into a stripped down version of android with stock recovery on it, although everything was mirriored and backwards. But when i tried to install the stock rom for my LeEco S3 with stock recovery it got stuck i a boot loop and I couldn't turn off the phone or boot into recovery or anything. So i let it keep booting until it ran out of battery and died. So then i decided i would put the stripped down version back on and start again.
So I went back to my sp flash tool and reinstalled all the partions except the boot and recovery partitions (according to the steps on the forum) but my phone still wont boot into anything, it is completely black and wont boot into recovery or fastboot, and im running out of ideas on how to fix this phone :crying:
After pretty much giving up all hope of fixing my phone, i figured i would try the format option in the flash tool and then reinstall all of the pattitions. I selected format all flash, not doing proper research first, and now i cant even reinstall partions, I get a STATUS_BROM_CMD_SEND_DA_FAIL error anytime i try to flash the partitions.
Click to expand...
Click to collapse
Help, pls I got the exact same problem... Pls any solution to it... I have been at it for a month now no solution, help
same problem. after twrp flash x626 not boot