My Kindle Fire is dead, i flashed ICS and everything went ok, after a couple of hours i switched the KF on and nothing happened.
The KF button becomes green for a second, then the light switches off and nothing on the screen appears.
If i connect it to the computer the button light doesn't become orange like when it is recharging, if i try to switch again nothing happens.
Any suggestions?
I cannot give it back as i have bought in the States and now i'm in Europe.
I think you have the same error as I just had. Plug it in and press the power button until something comes up on your computer. (OMAP4430 Device?) If so, try this: http://forum.xda-developers.com/showthread.php?t=1413951
If not you could try shorting the pins... see the thread i link to in that thread.
thank you very much.
I tryed now to press the power button for 30 seconds and now KF is alive again.
Looks like very weird this problem.
I will flash back CM7 and hope to have no problems again
Editing this as I'm desperate for help and things have moved on since I first posted, below is where I am up to post 11 of this thread.
I flashed Vegacomb b (exe), it restarted but stayed on the warning about paying for vegacomb for 10-15 minutes which didn't seem right so I held power for 6 seconds and it turned off. After that it would never turn on or go into recovery (I know all the methods, none worked).
Today I unhooked the battery, when I plug the battery back in the screen comes on for a second but then it's as it was, unresponsive. HOWEVER, if I plug the mains in with the battery disconnected then it immediately tries booting but still sticks at the warning (left for over 20 minutes). If I plug the battery in while on this screen then remove the mains it stays on. The power button is unresponsive through this so I still cannot get into recovery.
Any more ideas that haven't been mentioned?
I've tried well over 100 times to get into recovery but it's not happening
anyone willing to have a go at fixing (cheaply!) if I send them it?
Original Post:
Hi guys, just managed to (re?) install Vegacomb (b, from exe), it restarted but stayed on the white screen with the warning text about paying for Vegacomb for over 10 minutes so I held down the power button to turn it off, now I cannot do anything to boot it up (tried holding power button down from 0.5 seconds to 60 seconds!), it also won't boot into recovery. Is there anything at all that can be done to get this going?
cheers
OK, I've tried holding down back while plugging in (fully charged btw), tried all variations of button presses with back and power, with and without USB, with and without power cable.
Only got until 10PM (UK time) to get this sorted (it's now 6PM) so any help/advise would be appreciated
Flash back to modded stock then try again.
From modded stock go app drawer and run recovery
From recovery wipe data, cache then go advance then wipe dalvik
Then press back
Then install zip from SD
Choose vegacomb from whatever directory on your SD you copied it to then confirm
If you ain't Got Vegacombe zip then download it.
Or you could run the .exe again but the above is my preferred method.
Also you might need to download modded stock v2 if you ain't already got it.
Good luck.
intel007 said:
Flash back to modded stock then try again.
From modded stock go app drawer and run recovery
From recovery wipe data, cache then go advance then wipe dalvik
Then press back
Then install zip from SD
Choose vegacomb then confirm
If you ain't Got Vegacombe zip then download it.
Or you could run the .exe again but the above is my preferred method.
Good luck.
Click to expand...
Click to collapse
??
the Vega won't turn on and won't go into recovery, cannot flash anything, nothing comes up on PC, tried all variations of the back and power buttons (inc back, plug in power & usb, press power, leave 2 seconds and release back) over 100 times. it's like it's dead.
the only thing it does is show a blue LED when I plug the power cable in
I've read that if you got less than 50 or 60% battery it wont go into flash mode (back button 2 seconds - power & back 2 seconds)
Have you got enough battery cause mine takes half a day to charge.
intel007 said:
I've read that if you got less than 50 or 60% battery it wont go into flash mode (back button 2 seconds - power & back 2 seconds)
Have you got enough battery cause mine takes half a day to charge.
Click to expand...
Click to collapse
100% (solid blue LED), been on charge for over 24 hours
I'm baffled mate, I've had same issue couple of times but after 10mins or so I've always got it to power back on.
Bricked
I've had the same problem and although quite drastic, remove the rear cover and unplug the battery connection (the multipin one with red and brown/black wires).
With the mains plug out,i found that if you press volume up and power with the wires unplugged and leav eit for a few mins then use back + power it will start as you need it to.
It may take a few tries but i have managed to do it following this procedure about 7-8 times.
Hope this helps.
DAve
I had trouble getting into recovery when the Vega was 100% charged (i.e. charge led was solid blue). When I let it discharge a little so it was flashing with the charger plugged in, I managed to get into recovery then.
dmarchant said:
I had trouble getting into recovery when the Vega was 100% charged (i.e. charge led was solid blue). When I let it discharge a little so it was flashing with the charger plugged in, I managed to get into recovery then.
Click to expand...
Click to collapse
I can't discharge it though as it doesn't turn on, left it 14 hours from last night, back at work again now and it still says fully charged
got the battery disconnected now to give it a try
Disconnected battery for around 10 minutes, put it all back together, still can't boot or get to recovery
EDIT: it works when the battery is disconnected (goes to the Vegacomb warning screen but no further, cannot power off or get to recovery still)
any ideas?
Anyone got any ideas?
it's meant to be unbrickable from what I've read so there must be a way around it but I'm out of ideas!
its user error. remeber to put it into recovery mode you need the power cable plugged into it too as well as usb.
slybunda said:
its user error. remeber to put it into recovery mode you need the power cable plugged into it too as well as usb.
Click to expand...
Click to collapse
Cheers, but its not user error. I'm not that stupid
Hi, this may not help but i had trouble flashing the stock rom because of the battery being fully charged, could only get the screen to light up so left it over night and then went through the normal routine and got into recovery.
Bill
Hi there
Just one question, how do you know for sure it hasn't gone into nvflash mode?
I know what you are going through trying to get the ruddy thing into nvflash, it's a mare if you don't quite get that timing right but seeing as the screen doesn't light up when it's in nvflash what is telling you whether you are actually in it, other than the screen coming on to say you are not or relying on a windows message?
As I said I had the same problems many a time but I use Audi tool now to tell me if nvflash has started, I got it off the Modaco forum, but when you are in nvflash it actually tells you so rather than relying on perhaps windows to tell you it has happened
If you haven't come across the audi tool before then just do a search for it on Modaco, I don't know if they have got it here on XDA.
mmace said:
Anyone got any ideas?
it's meant to be unbrickable from what I've read so there must be a way around it but I'm out of ideas!
Click to expand...
Click to collapse
wow, i'm quite surprised by the number of people who are taking their batteries out when they think there is a problem. You should never need to do this unless it is actually faulty.
Ok yes the Vega is nearly indestructible I have had my in a complete mess many times and have never had to do anything that hard to recover. Some times it will be a pain to get into nvflash mode but this can always be done just have to be patient and know a couple of tricks.
If you have tried the back button and then the power a few times and nothing there is another method.
Instead unplug the power then hold the back button down, whilst holding down the back button plug in the power release the back button after a couple of seconds (I like to count to 5)
I am hoping that you already have the USB cable connected and the right drivers installed on your PC.
Billy..
If you need more help head over to TabletRoms and look in the Vega forum (sorry XDA guys just there is a lot of other useful information there)
wks said:
Hi, this may not help but i had trouble flashing the stock rom because of the battery being fully charged, could only get the screen to light up so left it over night and then went through the normal routine and got into recovery.
Bill
Click to expand...
Click to collapse
I've tired fully charged and letting the battery drain for 40+ mins after it's been on the "warning" screen
mitt69 said:
Hi there
Just one question, how do you know for sure it hasn't gone into nvflash mode?
I know what you are going through trying to get the ruddy thing into nvflash, it's a mare if you don't quite get that timing right but seeing as the screen doesn't light up when it's in nvflash what is telling you whether you are actually in it, other than the screen coming on to say you are not or relying on a windows message?
As I said I had the same problems many a time but I use Audi tool now to tell me if nvflash has started, I got it off the Modaco forum, but when you are in nvflash it actually tells you so rather than relying on perhaps windows to tell you it has happened
If you haven't come across the audi tool before then just do a search for it on Modaco, I don't know if they have got it here on XDA.
Click to expand...
Click to collapse
I have Audi, I also have Device manager open, I know 100% it's never gone into recovery mode sine I started with this problem.
BillyFish said:
wow, i'm quite surprised by the number of people who are taking their batteries out when they think there is a problem. You should never need to do this unless it is actually faulty.
Ok yes the Vega is nearly indestructible I have had my in a complete mess many times and have never had to do anything that hard to recover. Some times it will be a pain to get into nvflash mode but this can always be done just have to be patient and know a couple of tricks.
If you have tried the back button and then the power a few times and nothing there is another method.
Instead unplug the power then hold the back button down, whilst holding down the back button plug in the power release the back button after a couple of seconds (I like to count to 5)
I am hoping that you already have the USB cable connected and the right drivers installed on your PC.
Billy..
If you need more help head over to TabletRoms and look in the Vega forum (sorry XDA guys just there is a lot of other useful information there)
Click to expand...
Click to collapse
TabletRoms has been no help for me, there's been no reply at all for my problem but there has here and at MoDaCo. I pulled the battery as a last resort as NOTHING is working, I've tried all the tricks at least 2 dozen times, some a hundred +, including the one you mention
Well I don't want to teach you to suck eggs, but I take it you did use Audi to delete and replace your drivers.
And then when powering on the Vega you held the back button for 2 secs and then the back and power buttons for 6 secs to get the Vega detected?
For me I can only see that there can only be 3 other possible causes
1./ the back button is broken on the vega
2./ The USB port on your PC or on the Vega has gone up the swanee
3./ The USB lead is no good
The Vega may be unbrickable but if the back button or the USB port has had it then .....
Yeah, tried it, cheers.
I followed the steps to get Ice Cream Sandwich on the kindle from this link<redacted> and used burritoroot3 and kindle fire utility, after some hick-ups with the Yellow triangle for twrp 2.0 I got everything working last night, or so I thought. I went to bed, kindle was probably 30% charged, but I think it died. Today, it will not power on, not will it recognize it is being charged. I've used an outlet and the usb cable from the pc.
If anyone has experienced this or knows how to fix, I would GREATLY appreciate it.
Thank You
anyone? I'm really hope I didn't just make my KF a paperweight, but I can't get it to boot, charge, etc. I've tried holding the power button 30+ seconds, nothing happens. A few times I've gotten the power button to flash green then nothing.
I've never had this problem but perhaps you could try the debrick utility in development? And I'm assuming you tried holding the power button for like 30 seconds while charging on the wall?
Sent from my HTC EVO 3D using XDA App
Nevermind, shew....i just kept trying and eventually it booted and i restored the the backup I made before putting ics on there.
You experienced the sleep of death I think. If it happens again just hold the power button for awhile. Other than that ICS runs good, don't be scared to use it
Sent from my HTC EVO 3D using XDA App
I just bought a refurbished Kindle Fire from Amazon, ran the permanent root process on Kindle Fire Utility, seemed to work fine, told me I was rooted and with great power comes great responsibility. Right after, the Kindle turned off and I can't get it to turn back on, its just a black screen. Anyone have thoughts on what might be causing this?
creos21 said:
I just bought a refurbished Kindle Fire from Amazon, ran the permanent root process on Kindle Fire Utility, seemed to work fine, told me I was rooted and with great power comes great responsibility. Right after, the Kindle turned off and I can't get it to turn back on, its just a black screen. Anyone have thoughts on what might be causing this?
Click to expand...
Click to collapse
Have you tried holding the power button several minutes?
Sent from my Kindle Fire using xda premium
empty battery ? wall charger for some hours
I tried charging it for four hours and I pressed the power button for almost five minutes, nothing. Interesting thing is the charger light doesn't come on when charging, there's zero response from the tablet. I'm starting to think its faulty hardware.
creos21 said:
I tried charging it for four hours and I pressed the power button for almost five minutes, nothing. Interesting thing is the charger light doesn't come on when charging, there's zero response from the tablet. I'm starting to think its faulty hardware.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=24285697&postcount=5
btw it can last up to an hour until the led is coming up if the battery is realy flat ...
hey to all, its my first msg here so ill try to describe as much as i can
I'm reading in XDA for a while, almost every question i had i found the answer here somewhere so thanks all all of you!
i have the p7500 tab with JellyBeanRom ICS v6 XXLQ8 with the A1 kernel (installed it few days ago, till then i was with JellyBeanRom ICS v5.1 i think)
Two days ago i found my tab off, i tried to turn it on and no respond, only after at least 10-15 tries of holding the power and vol+ or vol- and just holding each one of them separately for 20-60 seconds one the combinations boot it on.
I used the tab like nothing happened , fixed permissions and it worked fine until the screen went off (i think only when it was in 'deep sleep' cos i turned off the screen few times only for few sec and it was ok). sine that moment the tab was off again for 12 hours, only today again after lots of tries and strange combinations i succeed to boot it again.
I installed the rom again, wiped every option, fixed permissions again and used again the tab for 45 min (while he was with screen on) and it worked ok, connected it to the pc and it was fine, i went to a meeting with the tab in my bag and i got out and the tab is still off.
when its off, the computer doesn't recognize it, the tab is no charging since the morning and still nothing.
any idea please? i have a cwm backup that maybe can help me but need to boot first
If you were having stange problems with turning it on, why didn't you look into it the first, or second time?
Anyway, this happened to me on my tab using one of the JB roms.
-Have you tried charging with charger and not the PC?
-When you plug it in to the wall, do you get the battery icon, even for a short few seconds?
Just to confirm, you have tried holding the power button for 30-40 seconds and it doesn't do anything? Do you feel it vibrate at all?
i didnt thought to look it up at the first time cos i thought its only a glitch cos i turned it on again and it worked fine, the 2nd time i reinstalled the rom and wiped everything..
-Have you tried charging with charger and not the PC? Yes, tried few chargers and 2 different cables
-When you plug it in to the wall, do you get the battery icon, even for a short few seconds? nope, didnt got anything, no battery icon.
Just to confirm, you have tried holding the power button for 30-40 seconds and it doesn't do anything? Do you feel it vibrate at all? yes i tried it, i even used a tape to hole the power button for few hours, and also to hold power and vol-.. and no vibration at all
if ill take it to samsung lab, they have any way to know that i changed rom? cos if its off, i can tell them that i didn't changed a thing and like this the warranty still good
please help..?
If it's still not turning on then I suspect it's a hardware issue. If you can get it to turn on again flash a stock rom and test.
If it turns off again your only option is to send it in for repair. Alot of times they will fix it and not care about the rom.
Sent from my GT-I9300 using xda premium