I bought a defy that had already been flashed and i don't like the ROM. Currently MS2Green0.3 Rom is installed. I want to upgrade to 2.3.6. from 2.3.4.
which version is 2.3.4 froyo OR GB?
But i couldn't find my CG version, how do i find it?
I have a green defy, which rom can i flash?
how can I upgrade to 2.3.6? I dont want to install full SBf.. PLease let me know the procedure.
My phone:
- android version: 2.3.4
- System version: MIUI-203160
- Build Version: 4.5.3-MS2-5_0.30
Thx!
Android versions:
2.1.X - Eclair
2.2.X - Froyo
2.3.X - Gingerbread
For how's see guide for beginners
slhysf said:
I bought a defy that had already been flashed and i don't like the ROM. Currently MS2Green0.3 Rom is installed. I want to upgrade to 2.3.6. from 2.3.4.
which version is 2.3.4 froyo OR GB?
But i couldn't find my CG version, how do i find it?
I have a green defy, which rom can i flash?
how can I upgrade to 2.3.6? I dont want to install full SBf.. PLease let me know the procedure.
My phone:
- android version: 2.3.4
- System version: MIUI-203160
- Build Version: 4.5.3-MS2-5_0.30
Thx!
Click to expand...
Click to collapse
Go here
And please use search option
Related
This may be a stupid question, but what is the different between the JI6 update and the 2.1 update1?
I just got a replacement phone from T-Mob and it claims to have firmware version 2.1 update1 but the baseband version is JFD.
Or maybe I'm trying to understand what things are in baseband vs. what is in firmware. I assume one difference is that its easy to change the firmware, but that does not help me much.
Thanks
JI6 is latest and 2.1 update 1 is the old version
I really don't know if there was a pre release version 2.1 (without update 1)...
as far as i know, the very first vibrant came with 2.1 update 1 (or JFD), and that's what you have now.
You should get this updated to JI6...
sandstones said:
This may be a stupid question, but what is the different between the JI6 update and the 2.1 update1?
I just got a replacement phone from T-Mob and it claims to have firmware version 2.1 update1 but the baseband version is JFD.
Or maybe I'm trying to understand what things are in baseband vs. what is in firmware. I assume one difference is that its easy to change the firmware, but that does not help me much.
Thanks
Click to expand...
Click to collapse
There are no stupid questions, only stupid answers....
Eclair 2.1 update1 is the stock ROM that comes pre-installed on the Vibrant.
JFD is the launch version of that firmware.
The newest revision of the Eclair 2.1 update1 is JI6 which, I'm sure you've seen a thread or two about, attempts to fix many of the issues users were having with GPS/Sync/etc. If you realllllly wanted to simplify it, and I know this is completely wrong but follow me here, you have Eclair 2.1 update1(JFD). JI6 would essentially be Eclair 2.1 update1(JI6).
Since you've got a vanilla Vibrant, I'd suggest you charge up your phone and head over to the Kies Mini page to grab the JI6 update. Of course you could also wait for the OTA (over the air) update if you felt like it.
Has anyone thats gotten the update posted what the following versions list?
Firmware Version:
Baseband Version:
Kernel Version:
Build Number:
tommyk38 said:
Has anyone thats gotten the update posted what the following versions list?
Firmware Version:
Baseband Version:
Kernel Version:
Build Number:
Click to expand...
Click to collapse
Firmware Version: 2.1-update1
Baseband Version:T959UVJI6
Kernel Version: 2.6.29
Build Number: ECLAIR.UVJI6
Hello-
About a month ago I installed a beta of 2.3.4 on my Atrix (System Version: 45.3.0.MB860.Retail.en.05, Baseband N_01.77.15P, Kernel Version 2.6.32.9 xphk86 zch68lnxdroid45 #2, Build number olympus_hktw-userdebug 2.3.4 4.5.2A-5_OLH-3 110614 test-keys).
I'm getting tired of all the bugs in this dev version and would like to upgrade to the official 2.3.4.
Is it safe to do so? How would I go about updating it? Download the .zip from motorola's website? -- or is there a safer way of doing this? Would it be safe for me to use RSD/SBF to downgrade and then do OTA?
leesalminen said:
Hello-
About a month ago I installed a beta of 2.3.4 on my Atrix (System Version: 45.3.0.MB860.Retail.en.05, Baseband N_01.77.15P, Kernel Version 2.6.32.9 xphk86 zch68lnxdroid45 #2, Build number olympus_hktw-userdebug 2.3.4 4.5.2A-5_OLH-3 110614 test-keys).
I'm getting tired of all the bugs in this dev version and would like to upgrade to the official 2.3.4.
Is it safe to do so? How would I go about updating it? Download the .zip from motorola's website? -- or is there a safer way of doing this? Would it be safe for me to use RSD/SBF to downgrade and then do OTA?
Click to expand...
Click to collapse
As you stated you have the hktw 2.3.4 rom so YOU HAVE AN UNLOCKED BOOTLOADER IF YOU TRY TO RSD/SBF ANY MOTO SBF "WITHOUT" you will end with hardbrick
So the safe path to get official gb will be the2dcour 2.3.4+pudding sbf REMEMBER ALWAYS STICK WITH PUDDINGS SBF FROM NOW ON
I forgot the word pudding after "WITHOUT"
Thanks so much mramirezusa!
I can't post links, but is this what I'm looking for? Thread titled: [PUDDING] International House of Pudding! (Unlock/root thread) Updated July 23 2011.
Yeap you have 3 options:
1. Flash 1.83 WITH PUDDING from that thread and then perform OTA directly from your phone to get official 2.3.4/4.5.91
2. Flash 2.3.4 WITH PUDDING from that thread
3. moto-fastboot boot/system/webtop/preinstall/recovery extracted from official moto 2.3.4 SBF
Option 1 and 2 upgrade the bootloader so you CAN NOT perform any downgrade by moto standards (RSD/MSU)
Option 3 do not upgrade the bootloader
leesalminen said:
Thanks so much mramirezusa!
I can't post links, but is this what I'm looking for? Thread titled: [PUDDING] International House of Pudding! (Unlock/root thread) Updated July 23 2011.
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
Hey--
So, I tried option 2 -- downloaded 2.3.4 + pudding +preroot from that thread here on XDA.
Downloaded the latest drivers, RSDLite 5.3.1, removed the SIM and SD card and flashed this SBF.
Now, I'm stuck in an infinite reboot loop. Can anyone help?
Can I use fastboot to flash a ROM on there? Any recommendations for 2.3.4??
Thanks,
Lee
Edits:: trying to get into Android recovery -- I'm getting the android robot with an exclamation point. Any other options I can try in the menu when you hold the volume down button?
Edit 2:: I got android to boot again using kenneth's hktw + fastboot ... now i'm back on this developer 2.3.4.
I'm not sure if I'm blind or what, the SBF on Windows thread says I should be able to find the 2.2 SBF on that thread, but I cant find it ANYWHERE!
I really just want to go back to froyo from gingerbread. I have constant restarts, data and text will just turn off randomly.....sick of it.
System Version
4.5.596.MB810.Verizon.en.US
Android Version
2.3.3
Baseband Version
BP_C_01.09.12P
Kernel Version
2.6.32.9-g34b306d
[email protected] #1
Build Number
4.5.1_57_DX2-26
you guys are awesome, thank you in advance.
-James
wait?! is 2.2 also called 2.3.15?!!?!?!?!?!?!?
is this the file i need?
VRZ_MB810_2.3.15_1FF_01.sbf (downloaded from mydroidworld)
http://www.mydroidworld.com/forums/...droid-x-2-2-full-sbf-leaked-download-now.html
Find the froyo sbf here also
sites.google.com/site/1kdsdroidx/home
DROID X running liberty GB V.8
May I suggest the Linux method to SBF?
Found here:
http://www.droidxforums.com/forum/droid-x-sbf/23638-linux-solution-your-windows-rsd-lite-problems.html
As in the topic I Defy to download unlock. I could not even root it. Super One Click does not work. From the phone using the application. Other programs like Doomlord, unlock 4.2, 2.3.6 RootMoto not work. Even when trying to load other software for RSD, P2KTools error pops up. I do not know what to do with it. Any suggestion?
Motorola Defy XT320
System: Android 2.3.6
Kernel Version: 2.6.38.6 +
Build number: 0A.1F.3A
Flash software version: WE_Orange_Poland_v14_0524 ........
Bandwidth Version: 76XXU-USMEKOLYM .......
Software version: TNBST_4_0A.1F.3ARPS
muzyk12 said:
As in the topic I Defy to download unlock. I could not even root it. Super One Click does not work. From the phone using the application. Other programs like Doomlord, unlock 4.2, 2.3.6 RootMoto not work. Even when trying to load other software for RSD, P2KTools error pops up. I do not know what to do with it. Any suggestion?
Motorola Defy XT320
System: Android 2.3.6
Kernel Version: 2.6.38.6 +
Build number: 0A.1F.3A
Flash software version: WE_Orange_Poland_v14_0524 ........
Bandwidth Version: 76XXU-USMEKOLYM .......
Software version: TNBST_4_0A.1F.3ARPS
Click to expand...
Click to collapse
Sorry I can't understood. You can't root your phone? What else? Try that your description have a logic.
SuperOneClick doesn't work..
Try rooting with BL7
Root with BL7 doesn't work. Anything way don't Work. What i should do ?
I can't root this phone.
Take a look at this
You cannot use methods for regular defy on defy mini off course.
For possible solutions see this thread
I got a Defy ME525 yesterday which came with a 2.2. Its a chinese retail phone. I want to upgrade it to Gingerbread or higher versions if possible.
Model Number : ME525
Android version : 2.2.2
Build Number : JDGC_2.13.0
Any more info needed?
https://motorola-global-portal.cust..._detail/a_id/42807/p/30,6720,7695/action/auth
Or you can install manually a custom ROM (ICS, JB, KK):
http://forum.xda-developers.com/showpost.php?p=47315303&postcount=2