Has anyone succeeded to start USB 3G modem on A500.
It is the 5-th day I am trying different roms and kernels.
Now I use Thor Rom 14.2 [3.2.1], and applied 3g fix 14.2 with no result.
Please Help
E173s does not work, although E173 is listed as supported, e173s is a new revision with different driver and it doesn't work with iconia.
I also have this stick and I lost couple if days trying to make it work, finally I bought E1552 for 10$ and it works flawlessly.
What does this dongle do for you on the A500?
Error when searching for networks, and it is impossible to save APN. Absolutely no difference with or without the USB Stick.
I saw some people saying that after several procedures it works. Some kernel modules may be, or probably I need drivers for E173s-2.
Are you sure you flashed the 14.2 3g patch? There was a previous version with a defective apn.conf file that produced the problems you are describing. Maybe you try flashing again the latest 3g patch.
With best regards, maris
I thought 14.2 3g patch i only one. can you give a link or something here or on a message
then what dongle???
What dongle usb modem works with the iconia a500 without any problem? please help me!!!!! I have the same problem using the same modem huawei E173
Related
Hi all
As title says, is USB tethering is made possible in Nook Color ? And also can I use USB 3G Modems with it ?
Also I am CM7 version 72, I never updated it since. How do I update it to latest nightly or to CM9 ?
Thank you !
Not certain. I use a Cradlepoint wifi hotspot and a wireless usb modem. I can then use it for all my devices.
Thanks for replying
How do I update to latest CM7 or CM9
Has anyone made any progress on this yet? Scrolling down the page at this Nook Color-Android Development post
http://forum.xda-developers.com/showthread.php?t=1459892&highlight=wireless+headset
I see 3G-related info, but it doesn't seem to bear directly on NC. I don't know what to make of it.
Aside from using a Cradlepoint router (and there are battery-powered ones available) and tethering NC to another device, it would be great to plug in a USB modem w/ SIM card and go.
Is there any ICS rom for a 500 support 3g usb modem ?
because i have a hony comp rom that support huawie 3g usb modem and i am afraid to upgrade to ics and lose this option
bassem100 said:
Is there any ICS rom for a 500 support 3g usb modem ?
because i have a hony comp rom that support huawie 3g usb modem and i am afraid to upgrade to ics and lose this option
Click to expand...
Click to collapse
Nope.
That's the main reason i'm stuck in Honeycomb for my A500.
Yes, of course, there is! Just google TegraOwners ICS ROM. It works excellen with most Huawei 3G USB drives. No restart required. Switch off wifi, stick in the 3g modem, and it will connect. No reboot or rilrestart required.
With best regards, maris
thank you so much for answering me could you generously give me a link for this rom
Sorry, as the kernel source code of this ROM is not published, xda does not allow to post a link to this ROM. Just google.
With best regards,, maris
I did but i found a lot of negative comments about the rom so i will wait until i will find a suitable one on xda
Mine support 3GUSB with new widget , very easy and confirmed by me it works on my custom ICS rom as I use my 3GUSB dongle with it.
Look at my rom thread.
Hi to everybody,
I'm new to defy world, and I don't understand this strange issue...
Is it fixed ?
Is it related with the radio (so with latest official motorola ROM flashed)?
Thanks
sent from my NS
You are not very specific with your request/question but the Defy is well known for connection drops net only and telephony as well, which can only be recovered by a reboot. It is not fixed and probably never will be, because the problem is most likely located in the closed source RIL.
A few people reported they never had the bug with cm7_euroskank_v121203, walters rom and whiterabbit. But I cannot personally confirm that. I tried the euroskank version and it seemed to behave, but that was only a short test.
Other than that there is a workaround which works by autorebooting the system when you get a socalled bp panic (forgot what that means). It is integrated in most CM7 roms and CM10/10.1 but those require sim pin so the reboot is not as practical as in the CM7 builds.
Good luck.
thank you
Recently I found this interesting Tool ... and I successfully flashed "Allminipc_ug802_RT8188_4.4_720p.img" (Kitkat version) on my MK802 III using Debian Linux 7.5!
Regards, mistersixt.
In case someone is interested: I successfully installed the rk3066 drivers for WinXP using Moborobo, rooted the device with the kingo root tool, and I was able to installed the xposed framework 2.6, too, including XPrivacy, root cloak etc.
So I have a fully 4.4.2 running MK802 III with root access and Xposed framework!
Regards, mistersixt.
mistersixt said:
Recently I found this interesting Tool ... and I successfully flashed "Allminipc_ug802_RT8188_4.4_720p.img" (Kitkat version) on my MK802 III using Debian Linux 7.5!
Regards, mistersixt.
Click to expand...
Click to collapse
Very interesting..Any chance you could share the firmware image file and also let us know how has it been so far...is it fast enough and does the Wifi and Camera (UVC drivers compatible) work w/ this ?
Also could you confirm if this is for MK802III and not MK802IIIS...
Cheers
optimus975 said:
Very interesting..Any chance you could share the firmware image file and also let us know how has it been so far...is it fast enough and does the Wifi and Camera (UVC drivers compatible) work w/ this ?
Also could you confirm if this is for MK802III and not MK802IIIS...
Cheers
Click to expand...
Click to collapse
It is the MK802III, and the stick is running fast and stable. Wifi is as bad as with 4.1 ... but I think this is a general (or hardware related) issue, I am using it with a USB to LAN adapter anyway.
Concerning the camera I have no idea.
Regards, mistersixt.
mistersixt said:
It is the MK802III, and the stick is running fast and stable. Wifi is as bad as with 4.1 ... but I think this is a general (or hardware related) issue, I am using it with a USB to LAN adapter anyway.
Concerning the camera I have no idea.
Regards, mistersixt.
Click to expand...
Click to collapse
Hi,
Thanks for your response.
I've just installed this firmware on my MK802III and it seems no audio video app is working properly. Youtube does not show any video or sound. Neither can I play youtube in the browser.
No streaming media player works either. Only the local media files are playing properly.
The playstore seems to take ages to install apps because of speed, however when I check the internet speed using speed testing app it gives a good enough speed of 7Mbps.
Also i've noticed that there the wifi network connections are getting dropped abruptly. The wifi connection itself seems to be OK but connection from apps such as Airdroid drop out and upload from my local machine via Airdroid takes ages w/ speeds in Kbps.
Can this be fixed please.
Thanks,
OP
optimus975 said:
Hi,
Thanks for your response.
I've just installed this firmware on my MK802III and it seems no audio video app is working properly. Youtube does not show any video or sound. Neither can I play youtube in the browser.
No streaming media player works either. Only the local media files are playing properly.
The playstore seems to take ages to install apps because of speed, however when I check the internet speed using speed testing app it gives a good enough speed of 7Mbps.
Also i've noticed that there the wifi network connections are getting dropped abruptly. The wifi connection itself seems to be OK but connection from apps such as Airdroid drop out and upload from my local machine via Airdroid takes ages w/ speeds in Kbps.
Can this be fixed please.
Thanks,
OP
Click to expand...
Click to collapse
bumping this up..!
can confirm, that works great on Measy U2A.
MK802IIIs up and running
Works brilliantly on my MK802IIIs. Wifi is strong and Bluetooth works out of the box. Already rooted and CWM recovery installed. Now its time for some Xposed magic! Anyone has an idea which XBMC version will run best on this?
I'm using the ROM from this thread http://freaktab.com/forum/tv-player...73-full-1080p-modded-kit-kat-4-4-2-rk3066-rom
Super fast and stable, its like a new machine coming from the old JB ROM I had on there. I can actually use it now.
This ROM is for an Imito device but the MK802IIIS is identical hardware.
Few OC kernels in that thread to to play with.
ozzy lion said:
I'm using the ROM from this thread
Super fast and stable, its like a new machine coming from the old JB ROM I had on there. I can actually use it now.
This ROM is for an Imito device but the MK802IIIS is identical hardware.
Few OC kernels in that thread to to play with.
Click to expand...
Click to collapse
Hi,
The rom seems nice but I just can't get it to run correctly on my MK802IIS. I just flashed the rom on this thread (V 1.1 ) without flashing a custom kernel. Just flashed the entire rom. And after the first boot, I see the apps update (the optimization screen) and then I'm stuck on the screen where there is an Android icon on the top with a blue bar underneath. This screen just keeps blinking and seems to be impossible to pass. I can access the settings, but I found impossible to activate wifi or lan.
Ozzy, you seem to have a MK802IIIS, did I miss something during the flashing? Do I need to flah a custom kernel after flashing the rom?
Linkysly said:
Hi,
The rom seems nice but I just can't get it to run correctly on my MK802IIS. I just flashed the rom on this thread (V 1.1 ) without flashing a custom kernel. Just flashed the entire rom. And after the first boot, I see the apps update (the optimization screen) and then I'm stuck on the screen where there is an Android icon on the top with a blue bar underneath. This screen just keeps blinking and seems to be impossible to pass. I can access the settings, but I found impossible to activate wifi or lan.
Ozzy, you seem to have a MK802IIIS, did I miss something during the flashing? Do I need to flah a custom kernel after flashing the rom?
Click to expand...
Click to collapse
I just flashed the basic ROM with the unmodified kernel. I did try one of the OC kernels but it wasn't stable on my device.
The screen you mention doesn't sound familiar to me.
Did you do a full wipe?
ozzy lion said:
I just flashed the basic ROM with the unmodified kernel. I did try one of the OC kernels but it wasn't stable on my device.
The screen you mention doesn't sound familiar to me.
Did you do a full wipe?
Click to expand...
Click to collapse
Hi, thanks for your answer mate
Yeah I did a full wipe, that's why I don't understand what's happening to me. I see someone on the thread has the exact same problem, but doesn't precise on which device, so I preferred to ask you first, as we have the same device.
I'll just try the v.1.0, mabe that 1.1 version doesn't run on my key. Did you flash the 1.1 or the 1.0 ?
Hello
I know I am a bit off topic but this TV stick is based on the same CPU....Can somebody help me ?
I ordered this
http://www.ebay.co.uk/itm/Dual-Core...g-/111655649656?ssPageName=ADME:X:RTQ:GB:1123 and seller's understanding of the English language is very close to none
Can somebody tell me which webcam models does it support ?
I have just installed Allminipc_ug802_RT8188_4.4_720p on an MK802III. I have used it for an hour and installed all my apps etc.
Both sound and Wifi (Realtek) seems to work.
I've been using mine daily since I posted last time. It works fine except for some hick ups.
Sometimes during bootup it hangs with just 3 penguins on the screen.
And I'm running out of internal disk space all the time. I never did that on the official 4.2 even though I had many more applications installed then. Any ideas how to fix that?
Help please...
I have : BOARD
MK802IIIS
BOOTLOADER
unknown
BRAND
MK802IIIS
CPU_ABI
armeabi-v7a
CPU_ABI2
armeabi
DEVICE
MK802IIIS
DISPLAY
MK802IIIS-eng 4.2.2 JDQ39 eng.zs.20140312.150142 test-keys
FINGERPRINT
MK802IIIS/rk30sdk/rk30sdk:4.2.2/JDQ39/eng.zs.20140312.150142:eng/test-keys
HARDWARE
rk30board
HOST
hotack-desktop
ID
JDQ39
MANUFACTURER
rockchip
MODEL
RKM MK802IIIS
PRODUCT
MK802IIIS
SERIAL
FKO0EQZQGR
TAGS
test-keys
TYPE
eng
UNKNOWN
unknown
USER
zs
CODENAME
REL
INCREMENTAL
eng.zs.20140312.150142
RELEASE
4.2.2
SDK_INT
17
Its rooted just need to know how to UPGRADE THIS TERRIBLE DEVICE....
Hello. I just got hold of an acer iconia a501 which is running 4.0.3 If it's cool I just have a couple of questions: 1. Should I just leave it as is or are there many benefits to modifying and upgrading the os? 2. If so, I can't quite figure out which process to do in the right order ie rooting, flashing a rom etc. If I could just get the information as to what steps I need to take, I'll be able to find the how to on this forum. I appreciate your help.
Ryan.
Big Upgrade benifit
yurtal said:
Hello. I just got hold of an acer iconia a501 which is running 4.0.3 If it's cool I just have a couple of questions: 1. Should I just leave it as is or are there many benefits to modifying and upgrading the os? 2. If so, I can't quite figure out which process to do in the right order ie rooting, flashing a rom etc. If I could just get the information as to what steps I need to take, I'll be able to find the how to on this forum. I appreciate your help.
Ryan.
Click to expand...
Click to collapse
Hello, I used to be stock ICS. got ok battery life and performance. I flashed TegraOwners Lollipop rom and it was so much better. Yes its in its early stages but screen on time went from barely 3 hours to 5 1/2-6. With no under clocking. Pretty amazing.
bacu12 said:
I flashed TegraOwners Lollipop rom and it was so much better.
Click to expand...
Click to collapse
Is the Lollipop ROM you flashed for the Acer 501 only?
BOTH
ransom147 said:
Is the Lollipop ROM you flashed for the Acer 501 only?
Click to expand...
Click to collapse
The rom I flashed is made for both a501 and a500. I personally use a500. They also have cm12 rom for a500 and a501
noob needs opinion 3.2.1, on upgrading acer a500
(Sorry for invading your thread, but I did not know where to start asking.)
Hi I feel like I am out of luck. If that is the case, please just treat the backstory as a bit of entertainment.
To upgrade the Acer A500 Iconia Tablet from Honeycomb 3.2.1(oem) to something more current, perhaps IceCreamSandwich 4.0, can I download a file to a microSD card, plug the card into
the tablet, and get the upgrade? I read somewhere about a file called update.zip. Is the process just this simple/easy?
BackStory:
This tablet is hard to love as it doesn't come with any sample media, or even any file-manager. Once in a while it crashes to the home screen. But another feature I really want is to take screenshots. That is why I want to root the A500.(Problem0 Recently, the lockscreen failed. (My password is made of letters, whereas the A500 would no longer display the virtual keyboard, only the virtual numeric keypad!). therefore I did a cleanWipe reset of the tablet. 'Android version 3.2.1; Build number Acer_A500_7.014.02_COM_GEN2'. Problem0 fixed.) Problem1: I am a newbie w poor computer skills. Problem2: I am a newbie w poor computer skills.
I register the tablet w Acer, and then install ICS A500 Update from Google Play Store. (ICONIA TAB Update Enhancement, Acer Inc. - March 18, 2012: Application_Acer_2.2. 120307.3_A32H_A.apk)
Next I go to settings... and click on Acer System Update "check now" button. But the only message popup is 'Network coverage is currently poor. Please move to a location with better coverage to continue.' Funny as the wifi indicator indicates the signal as very strong. I try signing into Acer.com support, but it says 'your email (id) is not recognized'.
Questions:
1. Should I upgrade to something newer than the built-in Android 3.2.1? and if so which version?
2. Should I root? (How do I root? Is a PC required to do this?)
(3. Do I first need to get Acer software/drivers for PC?)
(4. What is a good app to use to backup Acer A500 to PC?)
Thank you for your attention; a frustrated A500 user,
J.