Has anyone succeeded to start USB 3G modem on A500.
It is the 5-th day I am trying different roms and kernels.
Now I use Thor Rom 14.2 [3.2.1], and applied 3g fix 14.2 with no result.
Please Help
E173s does not work, although E173 is listed as supported, e173s is a new revision with different driver and it doesn't work with iconia.
I also have this stick and I lost couple if days trying to make it work, finally I bought E1552 for 10$ and it works flawlessly.
What does this dongle do for you on the A500?
Error when searching for networks, and it is impossible to save APN. Absolutely no difference with or without the USB Stick.
I saw some people saying that after several procedures it works. Some kernel modules may be, or probably I need drivers for E173s-2.
Are you sure you flashed the 14.2 3g patch? There was a previous version with a defective apn.conf file that produced the problems you are describing. Maybe you try flashing again the latest 3g patch.
With best regards, maris
I thought 14.2 3g patch i only one. can you give a link or something here or on a message
then what dongle???
What dongle usb modem works with the iconia a500 without any problem? please help me!!!!! I have the same problem using the same modem huawei E173
Is there any ICS rom for a 500 support 3g usb modem ?
because i have a hony comp rom that support huawie 3g usb modem and i am afraid to upgrade to ics and lose this option
bassem100 said:
Is there any ICS rom for a 500 support 3g usb modem ?
because i have a hony comp rom that support huawie 3g usb modem and i am afraid to upgrade to ics and lose this option
Click to expand...
Click to collapse
Nope.
That's the main reason i'm stuck in Honeycomb for my A500.
Yes, of course, there is! Just google TegraOwners ICS ROM. It works excellen with most Huawei 3G USB drives. No restart required. Switch off wifi, stick in the 3g modem, and it will connect. No reboot or rilrestart required.
With best regards, maris
thank you so much for answering me could you generously give me a link for this rom
Sorry, as the kernel source code of this ROM is not published, xda does not allow to post a link to this ROM. Just google.
With best regards,, maris
I did but i found a lot of negative comments about the rom so i will wait until i will find a suitable one on xda
Mine support 3GUSB with new widget , very easy and confirmed by me it works on my custom ICS rom as I use my 3GUSB dongle with it.
Look at my rom thread.
Q&A for [USB OTG] [11DEC13] [PATCH] Externally Powered USB OTG
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [USB OTG] [11DEC13] [PATCH] Externally Powered USB OTG. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Paranoid Android 4.4
Hello!
first of all, thanks for your work. :good:
I would like to try the patch but I don't know which version to choose: I have a Paranoid Android 4.4
Could you help me?
Wifi Crash, Media Crash, Settings "Storage" Crash
Hey guys, I'm on PA 4.6 BETA5, when I flash the aosp or franko kernel (after going back to stock kernel before flashing the new one) my Wifi won't enable, android.something.media crashes and in the settings app, when I tap storage the app crashes...any way to solve this problem or an alternative? Thanks!
PS: I'm really sorry if this was asked before, I read the hole last 10 sites of the forum and didnt found anythings related to my problem, "just" 10 sites because I think its related to 4.4.4 and maybe PA.
Which OTG mod to download for stock 4.4.4?
Which OTG mod to download for stock 4.4.4? There are so many I can not figure out what is the correct one to use.
OTG Android Lollipop
Anything to Android 5.0? I have looking and I think that it isn't incorporate in the stock kernel
thanks
piedra96 said:
Anything to Android 5.0? I have looking and I think that it isn't incorporate in the stock kernel
thanks
---------- Post added at 11:38 AM ---------- Previous post was at 11:34 AM ----------
I have looking and I think that it isn't incorporate in the stock kernel. So, anything to Android 5.0?
thanks
Click to expand...
Click to collapse
There are custom kernels (unleased kernel series, Hells Doctor, Hellscore, ...) which supports OTG and also supports Lolipop.
Stock Lollipop
A zip file where i can make a modification to my stock kernel on the N4! I want to use the stock for a few days to test it!
pm_dsp_ra said:
There are custom kernels (unleased kernel series, Hells Doctor, Hellscore, ...) which supports OTG and also supports Lolipop.
Click to expand...
Click to collapse
mm okey! so, have you test Hells Doctor on Lollipop? I will try out it this afternoon. I'm running a 4.3 stock perfectly with the otg, but Lollipop look like so excited.
Lollipop
Is there a patch for android lollipop for OTG support? I have franco.Kernel installed.
Lollipop
Is there a patch for Lollipop? Or does the kitkat patch work on lollipop?
dangerelvis said:
Is there a patch for Lollipop? Or does the kitkat patch work on lollipop?
Click to expand...
Click to collapse
I have no idea! I have tested Hells Doctor and Hell Core kernels on my Nexus 4 running Stock Lollipop and anyone work. :crying: :crying:
Anyone tried this patch on stock Lollipop kernel? Does it work?
How does one "Simply install the zip in recovery"?
My screen is broken (just the touch; everything is still visible). I was hoping I could install this mod without being able to touch the lower half of my screen so that I could plug in a mouse so that I could copy some files off my device.
I can reboot into recovery mode, but USB debugging is *not* enabled. I've never used "adb" on this device before (I just says "offline" when I try to run it from my PC).
I have no idea how to "install a zip".
Phone is an Nexus 4, running android 4.something.
OTG on Paranoid 4.6 beta 6
Hello,
When I flash the kernel (R199) and the system load I can't turn on the wifi and every time I enter the storege settings they crash.
also tried the other versions of the kernel, no help.
please help.
Thanks,
Is the OP willing to develop the patch for lollipop too? Or is there any nice kernel with USB host support?
nexus 4 lolipop 5.0.1 and xbox wireless gamepad
Hello. I want use xbox360 wireless gamepad on my nexus 4 lolipop 5.0.1. I think first I need kernel with OTG support. What kernel I can download on 5.0.1 android? I need y-cable for receiver of xbox360. what about mouses and keyboards they also need y-cable?
What can be the problem, why OTG still doesn't work
Hey guys,
however I'm completely new to this stuff, I managed to get through every barriers, and I put Cyanogenmod 11 snapshot M12 on my Nexus 4 and after that flashed the suggested kernel and patch successfully to try out OTG. The phone works withput problem, the installations seem to be successful, therefore I tried to connect an external storage to the phone to check if OTG works on it.
For that, I used a SIMPLE OTG cable like this:
<<<LINK CANNOT BE SHOWN SINCE I AM NEW TO THE FORUM - picture is the second picture of the first post in this thread>>>
connected to an Y-cable SIMILAR to this:
<<<NO LINK AGAIN - the 3rd picture of the first post in this thread>>>
The difference from the one on the picture is that mine has a male mini USB end instead of a female normal USB end as in the picture. My cable is the cable of an external wichester otherwise.
So, I tried with this cable setup, the result was that both the phone and the connected storage received electricity from the external power source, but the storage was not detected by the phone. I had a feeling that it doesn't get enogh power, so I attached it to a USB phone charger just to be sure, but the situation remained the same: the light on the storage was green, which means it is charging, the light on the phone was also on, but the storage was not detected.
My question is if I should try with the exact same cable set that can be found in the first post of this thread on the first picture or mine also should do the job, and there should be still some software related problem?
Please also tell me if you need more information on this to answer it, however I tried to be specific.
Thank you for your help in advance.
Hello. What i can do on lolipop? There is no solution? I have a 32gb flash drive, y-otg cable, standart power adapter micro-usb-male. Rooted nexus4
Which zip I need to download?
Hi, i'm really beggining on Android stuffs, since I didnt had one until the last week, so I'm really in doubt about which one of the zip files i need to install in my system to make the OTG cable work properly.
Once I downloaded a random ziddley zip on the internet and when I installed it in recovery mode, i needed to reinstall the android system on my phone, since the phone wont boot anymore.
So, can anyone help me? I'm sharing in this post a screenshot of the Android Version screen on the settings. I've rooted my phone using the King Root app
Considering that my android version is 4.4.4, I consider that I may download one of the following:
4.4.x: 2013.12.11 1604ET: [fk r199] [fk r199-CM]
4.4.x: 2013.12.06 1445ET: [aosp r7]
But which one?
And just another noob question. Is this the right way to install the ziddley zip on my phone?
(www).addictivetips.com/mobile/how-to-install-a-rom-or-app-from-zip-file-to-android-device-from-recovery/
Sorry for the noob questions and thanks to anyone who helps, because I REALLY need the otg cable to work, so I can develop some things using the XBOX 360 cable!
Removed
Hi!
I recently bought a USB-Ethernet Adaptater (this one actually). I also just rooted my phone, trying to follow this tutorial.
But I just read that Android 6.0.x phones don't have the "netcfg" binary, and are supposed to support natively USB-Ethernet.
But I don't see the <...> icon I'm supposed to get when connected. Looks like Samsung don't want us to use the driver. So how can I do?
Thanks
Hello,
Whenever I connect my phone to the laptop via hotspot it always shows up "failed to connect to the server". I've DU 64 bit and loony kernel installed on my phone.
Help me out
tobey_onk said:
Hello,
Whenever I connect my phone to the laptop via hotspot it always shows up "failed to connect to the server". I've DU 64 bit and loony kernel installed on my phone.
Help me out
Click to expand...
Click to collapse
Hi I am using AEX 64bits with loony kernel and hotspot is working absolutely fine here. Additionally as the dev also gives test builds on telegram so I've also tested the upcoming v6.1 64bit kernel and hotspot is working fine there too.
Hotspot issue was there for me on 32 bit for which I also personally contacted the dev and he said it is fixed and new build shall come today anytime so I can switch back to 32bit again. For any further assistance you should post bug report (with logs) in correct thread. It is not possible for him to investigate with only that much info. Thank you.