[Patch] [CM9/ICS] [loveme][29/05/12] Enable ICS Onscreen Buttons - Optimus One, P500, V Themes and Apps

hi guys
Here is flashable zip to enable on screen buttons in hep-happy's CM9 build
i have resized the navigation bar height
before it was 48, now it is changed to 32.
zip is attached (onscreen_resized_32.zip)
(Last release as cm has already implemented this feaure)
For hephappys loveme
http://db.tt/m9Alm5PC
ScreenShots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions :-
Reboot into recovery
backup your current rom (i.e. Nandroid backup)
flash ONSCREEN_RESIZED_32.zip (height = 32)
or
FLASH ENABLE_ONSCREENBUTTONS.zip (height = 48)
REBOOT and your done
NOTE -
If your doing a clean install then after flashing ROM reboot your phone then reboot into recovery again and then flash the zip or you'll get bootloops.
Credits
evilisto

Can't wait for this to be an option in CM settings...

How can I disable it?
_____________________
Swypnięte z LG-P500 przy użyciu Forum Runner

sQuAshPL said:
How can I disable it?
_____________________
Swypnięte z LG-P500 przy użyciu Forum Runner
Click to expand...
Click to collapse
Just flash
remove_onscreenbuttons.zip
Sent from my LG-P500 using XDA

vlt96 said:
Can't wait for this to be an option in CM settings...
Click to expand...
Click to collapse
Yea seriously
Sent from my LG-P500 using XDA

Isnt our phone a bit too small to also have onscreen buttons
Though even I would love to see this as an option in settings.

Thanks, my back button stopped working a couple months back. I couldn't enable softkeys on hephappy's build, so you saved my day!
But I believe it is too wide, it screwed a bit my homescreen. I read somewhere (don't remember, sorry) that it should be 36 pxls in height.
hope it helps
thanks!

pedrosa1 said:
Thanks, my back button stopped working a couple months back. I couldn't enable softkeys on hephappy's build, so you saved my day!
But I believe it is too wide, it screwed a bit my homescreen. I read somewhere (don't remember, sorry) that it should be 36 pxls in height.
hope it helps
thanks!
Click to expand...
Click to collapse
Lol sometimes my back button also doesn't work
Ok I'll try to change its height
Sent from my LG-P500 using XDA

rishabh22 said:
Isnt our phone a bit too small to also have onscreen buttons
Though even I would love to see this as an option in settings.
Click to expand...
Click to collapse
Many of us having buttons problem. So its good to have on screen buttons instead.
Sent from my LG-P500 using XDA

Yeah even I have a problem with the back button.
Does this work with lupo's test build?
Im getting bootloops :/
Edit
Im getting bootloop even on flashing the remove...zip :-(
Luckily I had manually backed up my own framework-res.apk. Can you please make a flashable zip for it(attached)?

rishabh22 said:
Yeah even I have a problem with the back button.
Does this work with lupo's test build?
Im getting bootloops :/
Edit
Im getting bootloop even on flashing the remove...zip :-(
Luckily I had manually backed up my own framework-res.apk. Can you please make a flashable zip for it(attached)?
Click to expand...
Click to collapse
I have tested it with hep-happy build so may it works with it only
Ok 2morow I'll give you the flashable zip
Sent from my LG-P500 using XDA

seriousia said:
I have tested it with hep-happy build so may it works with it only
Ok i'll give you flashable zip for framework you have attached 2morow.
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
Never mind that zip. I restored my framework-res using android commander(it lets u manipulate system files using pc) but it still wont boot
I had initially tried to replace the frameres app manually using root browser(first deleting the orig one after backing up) that might have caused the prob.
I am getting bootloops whatever I do
Why did I not backup my rom before trying this :'(

rishabh22 said:
Never mind that zip. I restored my framework-res using android commander(it lets u manipulate system files using pc) but it still wont boot
I had initially tried to replace the frameres app manually using root browser(first deleting the orig one after backing up) that might have caused the prob.
I am getting bootloops whatever I do
Why did I not backup my rom before trying this :'(
Click to expand...
Click to collapse
Which rom your using ?
Try to pull framework-res.apk from rom zip and push it in the system
Edit: did you changed the permission after pushing original framework.apk to system ?
Sent from my LG-P500 using XDA

seriousia said:
Which rom your using ?
Try to pull framework-res.apk from rom zip and push it in the system
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
Im using lupo's testing kang..
Let me explain the whole thing that happened...
1.I used root browser in rom manager to manually backup the framework-res.apk
2.I deleted the my orig framework-res.apk(yeah that was stupid)
3.The phone started giving me weird errors but root browser was still open.
4.When I tried to copy the framres from ur zip it gave me an error that the memory was full(and arnd half the file was copied).
5.I by mistake closed the root browser(I wanted to check storage from stock app manager).
After that nothing would open..opening any app would give an error.
6.I rebooted my phone but it got stuck at the lg screen.
7.I removed and reinserted the battery and booted into recovery.
8.Flashed your zip from recovery.
Thereafter my phone is getting stuck at bootloop whatever I do

rishabh22 said:
Im using lupo's testing kang..
Let me explain the whole thing that happened...
1.I used root browser in rom manager to manually backup the framework-res.apk
2.I deleted the my orig framework-res.apk(yeah that was stupid)
3.The phone started giving me weird errors but root browser was still open.
4.When I tried to copy the framres from ur zip it gave me an error that the memory was full(and arnd half the file was copied).
5.I by mistake closed the root browser(I wanted to check storage from stock app manager).
After that nothing would open..opening any app would give an error.
6.I rebooted my phone but it got stuck at the lg screen.
7.I removed and reinserted the battery and booted into recovery.
8.Flashed your zip from recovery.
Thereafter my phone is getting stuck at bootloop whatever I do
Click to expand...
Click to collapse
The framework.apk that you have attached is from lupo testing build ?
If yes then i can provide you flashable zip for it.
Sent from my LG-P500 using XDA

seriousia said:
The framework.apk that you have attached is from lupo testing build ?
If yes then i can provide you flashable zip for it.
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
Yes it is from lupo's. But I tried putting it with android commander from my pc.
Does it make a diff if it is a flashable zip?

rishabh22 said:
Yes it is from lupo's. But I tried putting it with android commander from my pc.
Does it make a diff if it is a flashable zip?
Click to expand...
Click to collapse
What about permission ?
Never used it so i dont know if have to set permission manually or not
Try fixing permission in recovery and then reboot
EDIT:
Okay here is you flashable zip
Try it and report please
http://qfs.mobi/f116517
Sent from my LG-P500 using XDA

seriousia said:
What about permission ?
Never used it so i dont know if have to set permission manually or not
Try fixing permission in recovery and then reboot
EDIT:
Okay here is you flashable zip
Try it and report please
http://qfs.mobi/f116517
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
Fixed permissions, wiped cache,dalvik...Still bootloop
Edit
Sorry hadn't refreshed the page so did not see ur zip.Will try and tell
---------- Post added at 01:16 AM ---------- Previous post was at 01:04 AM ----------
Um this is weird. Still bootlooping.
I guess something else got messed up during the time the framework was missing :/

rishabh22 said:
Fixed permissions, wiped cache,dalvik...Still bootloop
Edit
Sorry hadn't refreshed the page so did not see ur zip.Will try and tell
---------- Post added at 01:16 AM ---------- Previous post was at 01:04 AM ----------
Um this is weird. Still bootlooping.
I guess something else got messed up during the time the framework was missing :/
Click to expand...
Click to collapse
Hmm so you have to do a clean install now.
But before that make your nandroids backup with TWRP recovery
Then install the rom and then restore only /data from nandroid backup
In this way you wont lose any of your data, setting etc.
Sent from my LG-P500 using XDA

thank you very much for the patch, i had been really looking forward to it, but the buttons feel too big for our tiny screen. Do you think you can resize them?

Related

Installing 4.1.2 manually via CWM fails

I'm trying manually install 4.1.2 on my rooted Nexus 7 with CMW.
I downloaded the zip, placed it on my Nexus 7, proceeded regularly to install zip
i selected the zip and it aborted, says Status 7.
Thanks to the community below are solutions to get the update to flash.
EDIT
Thanks to Logic_
You can flash this .zip instead which disables all the checks but do it at your own risk as it can brick your tablet
https://www.dropbox.com/s/isqpvb0w26....1.2edited.zip
This is the update with the checks disabled. I didn't make this, got it off another forum, I just used it because I had moved an update to chrome into my /system and there was no easy way to revert it.
I wouldn't advise using this if you made build.prop modifications, but it is useful if your update is failing over some apps like google wallet.
Once again, I didn't make this and I'm not responsible if you for some reason use this to flash the update over some heavily modded rom
It's from JRO03D btw.
Click to expand...
Click to collapse
EDIT 2
osm0sis method to get the update to work is simpler and possibly risk free.
osm0sis said:
For those who've done some modding and can't remember what they did to pass the OTA asserts, all you need to do is dirty flash the system.img from 4.1.2 factory image in fastboot and eveything should work.
Click to expand...
Click to collapse
Did you try to redownload the zip?
Sent from my Nexus 7 using xda app-developers app
I got a similar error for build.prop file. I had changed it to enable/force auto rotation of the home screen when I was on 4.1.1. When I reverted the build.prop to its original file, it worked for me.
I see the error code is the same in your case as well. Is there a chance that you would have changed BrowserProviderProxy.apk?
mayoor_rao said:
I got a similar error for build.prop file. I had changed it to enable/force auto rotation of the home screen when I was on 4.1.1. When I reverted the build.prop to its original file, it worked for me.
I see the error code is the same in your case as well. Is there a chance that you would have changed BrowserProviderProxy.apk?
Click to expand...
Click to collapse
I didn't edit it which is weird, I don't think this matters but I did sideload aosp browser as I'm not a fan of chrome
Sent from my Nexus 7 using Tapatalk 2
Sebianoti said:
I didn't edit it which is weird, I don't think this matters but I did sideload aosp browser as I'm not a fan of chrome
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
It's from the side loading of the browser. I had this too. You have to restore those mentioned browser proxy file(s) to their original state. I also temporarily removed the browser apk from the system/app folder as well, although I'm not sure if this was required. The update installed fine after doing this.
Sent from my Nexus 7 using XDA Premium HD app
nyijedi said:
It's from the side loading of the browser. I had this too. You have to restore those mentioned browser proxy file(s) to their original state. I also temporarily removed the browser apk from the system/app folder as well, although I'm not sure if this was required. The update installed fine after doing this.
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
Oh okay, how would I restore those files to their original state though?
Sent from my Nexus 7 using Tapatalk 2
I'm having the same problem. I cannot seem to flash the update with CWM. I haven't edited any of the system files or anything like that. Is it the fact that I'm using a different launcher that's causing the problem?
Sebianoti said:
Oh okay, how would I restore those files to their original state though?
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I'd like to know too. I get the Build.prop error too.
You've made no changes whatsoever? What about the kernel? Worst case just use mskip's toolkit to flash back to stock 4.1.1. Check the lag thread I posted what I did and it worked like butter.
Sent from my Nexus 7 using xda premium
Hi all.....
I'm currently using stock Nexus 7 and did all ways possible here to update and nothing worked, last thing I did was go to setting, backup and restore and hit factory data reset and buala automatically got the update to 4.1.2
Nota: this is not a recommendation but if u wanna try do a Backup and good luck.
Sent from my Nexus 7 using xda premium
I deleted the original browser files in the system/app folder too.
Found them on the rootwiki site here....
http://rootzwiki.com/topic/35089-can-someone-hook-me-up-with-browserproviderproxyapk/
Worked perfectly after
modded build.prob / update problems to 4.1.2
i have similar Problem
Picture
h**p://i49.tinypic.com/w979qt.jpg
i modded my build.prob to Landsape mode. I guess that i corrupt the Md5 hash
(deleting the row with the added contend didnt solve it....)
I tried a factory reste and an Temp Wipe in clockwork. I thought this should solve the problem but i l get the sam error ....
What should i do ?
Flash a facotory Image ?
How do i get back my root, if the factory image is my only option?
Thanks a lot for your help
greets Razzor
I also had the same problem then remembered that I use FullScreenToggle to get rid of the nav bar. I just had to re-enable it and it installed fine.
If you are getting the error on 'build.prop' look in the /System folder with Root Explorer or the ES explorer. If you see a build.prop.bak, that is probably your original file. Rename build.prop to something else and rename build.prop.bak to build.prop. Restart and then try taking the update again.
If you side-loaded the gnex browser so you could use flash, go to the /System/App folder and make sure you have BrowserProviderProxy.apk and BrowserProviderProxy.odex named properly. As stated earlier, rename browser.apk to browser.apk.bak. Restart and then try taking the update again. I had that problem. After getting the OTA installed, I renamed the browserproviderproxy files again, and made it browser bak file browser.apk. Now I have flash working perfectly again on the gnex stock browser.
Okay i managed to fix the browser proxy thing, turns out i had 10.apk at the end of it for some reason
and i renamed browser.apk to browser.apk.bak so that worked,
but now i got the same problem but with wallet
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I remember having to jack around with Wallet to get the original update which allowed other credit/debit cards to be added. Some offered a solution where you could download a modified wallet.apk that would work instead of going through the other hoops. If you did that, the apk probably doesn't pass the verification. If you used a modified Wallet.apk did you backup the original one first?
Groid said:
I remember having to jack around with Wallet to get the original update which allowed other credit/debit cards to be added. Some offered a solution where you could download a modified wallet.apk that would work instead of going through the other hoops. If you did that, the apk probably doesn't pass the verification. If you used a modified Wallet.apk did you backup the original one first?
Click to expand...
Click to collapse
I didn't, and i did use a modified APK, but i deleted that, then i downloaded an original but still not working
build.prob error
Fixing steps for build.prob error :
VERY IMPORTANT: You will los all of your data, please make a backup befor you following this stepps ^^
Error Message apply_patch_check("/system/build.prob - "Numbers" , "Numbers")
My way which worked for me
1.)
The only way, if you dont have any backup of the original build prob file youl have to flash a copy of the factory IMAGE.
In my case i used the Nexus Toolkit 3.2 V - with this marvelous tool I copied the Factory Image 4.1.1 on it
2.)
After the factory Image you will lose your root. Install Clockwork or a other custom recovery image. Then its easy too get back your root with the Toolkit (follow the steps)
3.) If your not able to receve the OTA update to 4.1.2, download it and copy the ZIP to your Nexus 7
After this, go back to Fastboot and install the Updates using the up an down Volium buttons to navigate
Now the updating process should go very smooth
greets Razzor
I have the same error when installing from CWM and the ONLY CHANGES I made to my N7 are:
- Unlock
- Root
- CWM
- Battery Icon
Any other ideas? Will installing from ADB and Android own Recovery will work?
EDIT: I tried the update on my SECOND N7, which have all the above EXCEPT the battery icon mod and it works. So looks like the battery icon mod is the issue! Anyone know how to revert back to the original battery icon?
Also, since the first update failed, when I clicked on "Check" under SYstem Update, now my N7 said the system is up to date. How do I force the update to run again?
The system checks are there for a reason and I am in no way responsible if anyone bricks their device with this but...
https://www.dropbox.com/s/isqpvb0w26kqjdx/4.1.2edited.zip
This is the update with the checks disabled. I didn't make this, got it off another forum, I just used it because I had moved an update to chrome into my /system and there was no easy way to revert it.
I wouldn't advise using this if you made build.prop modifications, but it is useful if your update is failing over some apps like google wallet.
Once again, I didn't make this and I'm not responsible if you for some reason use this to flash the update over some heavily modded rom
It's from JRO03D btw.

New file structure system. 4.2.1. How do u access the root?

I recently boot looped my phone and had to manually stick files on my root.. Eguch doesn't seem to be accessible with the various file programs. These are a few hundred megs since they are ROMs and I want them removed. How do I get rid of them if I can't find them.
Any help would be appreciated.
Chris
Sent from my Nexus 4 using xda app-developers app
I'm kind of confused on what you're asking for "root." Root as in the root directory? or root as in superuser?
If it's root directory, it's in /sdcard/ or /storage/emulated/0/
Use a updated recovery such as TWRP or CWR.
I'm asking for the root of the file system. There was another level added when 4.2.1 was implemented. And I had to add files via a dB.. Which copied them to the root below the new level. Which I can't seem to access using the file app programs. Yet I can see them in cwm when I use it. Not sure what to do. I need them gone... I only have an 8 gig... Need the space.
Sent from my Nexus 4 using xda app-developers app
Here is a picture of the files I'm talking about. I've tried finding them and I can't. I've searched the directories individually as well did searches with the finding tools. Any ideas?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 4 using xda app-developers app
No idea. I use TWRP, I guess TWRP and CWR have it set differently?
Look around /sdcard/ and /storage/ ... on TWRP everything looks the same as it was before 4.2.X with everything being in /sdcard/
Try /storage/emulated/0/
its obvious and you could of done it yourself.. click on legacy. plus, you cant really access system in CW. only through ADB but doesnt seem like thats what youre asking..
try checking in /data/media
noodles2224 said:
its obvious and you could of done it yourself.. click on legacy. plus, you cant really access system in CW. only through ADB but doesnt seem like thats what youre asking..
Click to expand...
Click to collapse
Im not even sure what your saying man.. Umm did what myself? And I cant see the folder legacy ether, or clockworkmod for that matter, In fact I cant see any of the those files. I read on google currents that they added an additional layer to the file structure, meaning all the old 4.1.2 software wasnt saving to next level but to the original root. And you had to move them or something.
Anyways, clarification would be great.
Thanks
Chris
se1000 said:
try checking in /data/media
Click to expand...
Click to collapse
Nope, not in there.
wizshaw said:
Im not even sure what your saying man.. Umm did what myself? Whats legacy? I read on google currents that they added an additional layer to the file structure, meaning all the old 4.1.2 software wasnt saving to next level but to the original root. And you had to move them or something.
Well that is why you see Clockworkmod in there as well, which I also dont have access to.. which I did before the 4.2.1.
Anyways, clarification would be great.
Thanks
Chris
Nope, not in there.
Click to expand...
Click to collapse
Legacy is a folder. /storage/0/legacy
I don't understand what you did with your phone. Everything for me is in straight /sdcard/ I know they did something with the sd card because of multi user but it's not really that difficult.
Sent from my Nexus 4 using xda premium
zephiK said:
Legacy is a folder. /storage/0/legacy
I don't understand what you did with your phone. Everything for me is in straight /sdcard/ I know they did something with the sd card because of multi user but it's not really that difficult.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Yeah I got that... I dont know man. I just dont have access to it. Its like its on a lower level not accessible anymore by anything but CWM.. and I cant get it to it. Ive used 3 different file programs to try and access it. Nothing.
If I had a way to move it then that would be good, but CWM doesnt have that option. IDK.
Edit: I have an Sdcard folder, but all my files are in there, but not these ones. Its strange.
wizshaw said:
Yeah I got that... I dont know man. I just dont have access to it. Its like its on a lower level not accessible anymore by anything but CWM.. and I cant get it to it. Ive used 3 different file programs to try and access it. Nothing.
If I had a way to move it then that would be good, but CWM doesnt have that option. IDK.
Click to expand...
Click to collapse
Don't know. I switched from CWR to TWRP. I find TWRP to be way better. No file manager in CWR? TWRP has a File Manager where u can delete files in recovery.
When you downloaded those zip files where did you put them on your phone?
zephiK said:
Don't know. I switched from CWR to TWRP. I find TWRP to be way better. No file manager in CWR? TWRP has a File Manager where u can delete files in recovery.
When you downloaded those zip files where did you put them on your phone?
Click to expand...
Click to collapse
I pushed them directly to the phone through ADB. And I guess they saved to the lowest level.
Ill try out TWRP.
Thanks
Chris
wizshaw said:
I pushed them directly to the phone through ADB. And I guess they saved to the lowest level.
Ill try out TWRP.
Thanks
Chris
Click to expand...
Click to collapse
Oh no you never want to push those zip files through ADB -.- .. just drag and drop them via USB cable or use FTP.
I just hope they never become lost. Hopefully TWRP can fix this.
Maybe you could try doing adb commands to delete it? not sure. But try out TWRP. Was this the latest version of CWR too? 6.0.2.0
The "sdcard" is actually located at /data/media/0 everything else are symlinks.
I believe CWR places the backups in a folder in /data/media
zephiK said:
Oh no you never want to push those zip files through ADB -.- .. just drag and drop them via USB cable or use FTP.
I just hope they never become lost. Hopefully TWRP can fix this.
Maybe you could try doing adb commands to delete it? not sure. But try out TWRP. Was this the latest version of CWR too? 6.0.2.0
Click to expand...
Click to collapse
Yeah I actually had no choice, for I upgraded my kernel and it bootlooped, which means I only had access to the internal storage through ADB.. Also, I considered the delete option with ADB.. but there doesnt seem to be one. The pull command is a copy command and looking through the options, there doesnt seem to be much else there to really use.
Also I just tried the TWRP, I like it, although... I still cant see the files. I think... im gonna have to just back up all the important stuff and do a full format of the drive. That way, I start with a clean slate.. I think that is my only option to get the space back.
Anyways, thank you all for your help. Ill hit the thank you button if I can. (I had an earlier problem and I used it a bunch of times already)
Chris
jr67 said:
The "sdcard" is actually located at /data/media/0 everything else are symlinks.
I believe CWR places the backups in a folder in /data/media
Click to expand...
Click to collapse
I think i already looked, but ill look again. Thanks for the tip.
Chris
wizshaw said:
Yeah I actually had no choice, for I upgraded my kernel and it bootlooped, which means I only had access to the internal storage through ADB.. Also, I considered the delete option with ADB.. but there doesnt seem to be one. The pull command is a copy command and looking through the options, there doesnt seem to be much else there to really use.
Also I just tried the TWRP, I like it, although... I still cant see the files. I think... im gonna have to just back up all the important stuff and do a full format of the drive. That way, I start with a clean slate.. I think that is my only option to get the space back.
Anyways, thank you all for your help. Ill hit the thank you button if I can. (I had an earlier problem and I used it a bunch of times already)
Chris
I think i already looked, but ill look again. Thanks for the tip.
Chris
Click to expand...
Click to collapse
Sorry that you had to go to that route :/ always make sure you have some line of stable kernel or even a ROM (roms include kernels) and to the very least you can always do a factory reset and boot in without having it boot loop.
Good luck.
Data on SD Card befor flashing JB 4.2.1
When you move to JB 4.2.1 the contents of your SD card is relocate to mnt/system/emulate. You can copy your files from there to storage/emulated/0, reboot, and your recovery, in my case CWM, will see the folders.
Hope that helps.
On another note the new file structure does duplicate things, and I am hoping that it will be OK to delete the contents of the mnt/system/emulate in order to free up space on the SD Card.
nevermind

[Recovery] Open Source version of CWM recovery v6.0.2.7

This is vanilla build of clockwork mod recovery from CyanogenMod repo. The image we get from clockworkmod.com has some proprietary additions which blocks any app other than ROM Manager to access recovery. But I wanted open source build of CWM to make it work with CyanDelta, so I compiled myself.
You can flash this recovery using fastboot.
Code:
fastboot flash recovery recovery.img
Download
IMG File - androidtweak.in/downloads/crespo/recovery.img
Flashable zip - androidtweak.in/downloads/crespo/opensource-cwm-6.0.2.7.zip
Known Issues:
* USB mount not working within recovery.
jishnu7 said:
This is vanilla build of clockwork mod recovery from CyanogenMod repo. The image we get from clockworkmod.com has some proprietary additions which blocks any app other than ROM Manager to access recovery. But I wanted open source build of CWM to make it work with CyanDelta, so I compiled myself.
You can flash this recovery using fastboot.
Code:
fastboot flash recovery recovery.img
Download: androidtweak.in/downloads/crespo/recovery.img
Click to expand...
Click to collapse
Thank you for compiling this
Great idea! is this touch or non-touch version?
can anyone create a flashable zip ? Thanks for this Open Version!
AABatteries said:
Great idea! is this touch or non-touch version?
Click to expand...
Click to collapse
This is non touch version
matatr0n said:
can anyone create a flashable zip ? Thanks for this Open Version!
Click to expand...
Click to collapse
OK. I'll create a flashable version later today.
Sent from my Nexus S using xda app-developers app
Did usb mount work for you ?
raducux said:
Did usb mount work for you ?
Click to expand...
Click to collapse
Still not worked for me... back to 6.0.1.0 btw thanks dude for bring this..:good::good:
Here is the flashable zip.
xxxMADxxx said:
Still not worked for me... back to 6.0.1.0 btw thanks dude for bring this..:good::good:
Click to expand...
Click to collapse
is V. 6.0.1.0 has 2 mode of recovery? tar mode and blob? (i looked not 2 mode)
Edit: Here is the flashable zip.
mypat said:
is V. 6.0.1.0 has 2 mode of recovery? tar mode and blob? (i looked not 2 mode)
Edit: Here is the flashable zip.
Click to expand...
Click to collapse
Like this?? I even dont know what a mean "blob" folder :banghead:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus S using Tapatalk 2
xxxMADxxx said:
Like this?? I even dont know what a mean "blob" folder :banghead:
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
Mode 1 tar mode this means backup makes one tar file.
Mode 2 blob mode what i said before makes 1 main backup after that makes little backup files what was changed so it's little faster but you can't copy this to your computer completely which i never like.
mypat said:
Mode 1 tar mode this means backup makes one tar file.
Mode 2 blob mode what i said before makes 1 main backup after that makes little backup files what was changed so it's little faster but you can't copy this to your computer completely which i never like.
Click to expand...
Click to collapse
Ohh i see..btw mount storage is working for you on 6.0.2.7 dude?
Sent from my Nexus S using Tapatalk 2
xxxMADxxx said:
Ohh i see..btw mount storage is working for you on 6.0.2.7 dude?
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
I didn't tried yet also i don't want because it's not official . I'am still using 5.8.0.2.
mypat said:
I didn't tried yet also i don't want because it's not official . I'am still using 5.8.0.2.
Click to expand...
Click to collapse
Lol..
Sent from my Nexus S using Tapatalk 2
matatr0n said:
can anyone create a flashable zip ? Thanks for this Open Version!
Click to expand...
Click to collapse
OP updated with flashable zip.
is sdcard mount in recovery working? that's a very important matter, since it has a potential of bricking your device if you happen to lose your backup from sdcard and end up in a bootloop.
this CMW version has blob version backup? if yes, could the OP build the latest full-backup version of CWM in a similar manner? We would all be grateful, and even happy to donate for your effort.
cheers!
AABatteries said:
is sdcard mount in recovery working? that's a very important matter, since it has a potential of bricking your device if you happen to lose your backup from sdcard and end up in a bootloop.
this CMW version has blob version backup? if yes, could the OP build the latest full-backup version of CWM in a similar manner? We would all be grateful, and even happy to donate for your effort.
cheers!
Click to expand...
Click to collapse
if you big want to use this make 2 zip of recovery in your sd card one this the other 6.0.1.0 or 5.0.8.2 if you need mount sd flash the zip which have mount sd support. and this versiyon have 2 mode backup one what you want and the other blob, there is an opthin which you can be able to choose backup mode.
jishnu7 said:
The image we get from clockworkmod.com has some proprietary additions which blocks any app other than ROM Manager to access recovery.
Click to expand...
Click to collapse
This is not true. I use official cwm images exclusively and I've never had any app fail to reboot into recovery. If you're going to make a claim, please at least make sure there is some merit to it.
also, this is not touch-enabled.
hp420 said:
This is not true. I use official cwm images exclusively and I've never had any app fail to reboot into recovery. If you're going to make a claim, please at least make sure there is some merit to it.
also, this is not touch-enabled.
Click to expand...
Click to collapse
It's actually true. If you're going to make a claim, please make sure there's some merit to it. ;P
Only ROM Manager can interact with CWM recovery because extendedcommand are encrypted to only work with it due to licensing bull****. Doesn't mean reboot to recovery, means manage stuff to flash from within Android.
https://github.com/CyanogenMod/andr...mmit/08bedb21d87dede99f1e89a4869609389bb7cee7
Also, touch feature is not open sourced if I'm not mistaken.
polobunny said:
Only ROM Manager can interact with CWM recovery because extendedcommand are encrypted to only work with it due to licensing bull****. Doesn't mean reboot to recovery, means manage stuff to flash from within Android.
Click to expand...
Click to collapse
I know this is a little old, but do you have any (non-cyandelta) references for this? CM Updater seems to work just fine with CWM official, and it's very open source:
https://github.com/CyanogenMod/android_packages_apps_CMUpdater/blob/jellybean/src/com/cyanogenmod/updater/UpdatesSettings.java
If they can do it, I don't know why cyandelta can't.
bill.allrobots.org said:
I know this is a little old, but do you have any (non-cyandelta) references for this? CM Updater seems to work just fine with CWM official, and it's very open source:
https://github.com/CyanogenMod/android_packages_apps_CMUpdater/blob/jellybean/src/com/cyanogenmod/updater/UpdatesSettings.java
If they can do it, I don't know why cyandelta can't.
Click to expand...
Click to collapse
Read the first 3 lines of the commit I linked to
-// Copyright ClockworkMod, LLC. Reference and porting purposes only. Usage of the extendedcommand API
-// is restricted to those granted explicit permission, or by use of the ROM Manager Recovery API.
-// https://github.com/koush/TestRomManager
Click to expand...
Click to collapse
and
http://wiki.rootzwiki.com/OpenRecoveryScript
OpenRecoveryScript is a scripting engine that allows applications to pass commands to a custom recovery.
It is similar to extendedcommands used in ClockworkMod Recovery. However, OpenRecoveryScript is completely open-source, unencrypted, and available for every app to use without requiring a paid or limited API.
Click to expand...
Click to collapse
Cheers

[TOOLKIT] Universal Paranoid Android(PA) Porter[ICS/JB]

Tool Aces Present..
Universal PA Porter
About the tool:
This tool can be used to port the great Paranoid Android ROMs from any device. It's based on the guide of adityalahiri13. Thank him too.
How to use:
Make sure you that both the ROMs(Base and PA) have the same resolution. I recommend taking CM as base. Also make sure that the android versions of base and PA ROM matches. Try to use port from a device of same manufacturer, though it may not matter much.
Steps-
1. Place base ROM zip in CM folder.
2. Place PA ROM zip in PA folder.
3. Now click on Main.bat the tool will do some steps.
4. After this it will ask for your device resolution. Choose one among 5.
5. Then it will open build.prop and another file. Copy the lines from another text file to the build.prop below ro.modversion= and write the PA version you are porting infront of ro.pa.version=
6. Save and exit.
7. Now it will open updater-script and another file. Copy the line from another file and paste it to your updater-script below this line:
Code:
set_perm(1000, 1000, 0644, "/system/etc/paranoid/properties.conf");
8. Then it will ask for your android version. Choose ICS or JB, then it will zip the ROM, select name as desired and find your ROM in /PORT folder.
Congrats on your newly ported ROM.
Downloads:
Download the tool from here.
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FAQs:
Q. Well I ported this accordingly but it's stuck in bootloop. How to solve it?
A. In some cases this happens. Simply run bootloop.bat and see if it works. If it still doesn't works then run bootloop2.bat. Make sure to check if the ROM boots after running bootloop.bat, if still stuck on bootloop then only run bootloop2.bat
Q. Why you recommend porting from same manufaturer?
A. Well you can port from others also but in some of them you might need some framework modding and also need to do some modding in kernel. But in most cases even from other manufacturers the ROM should work.
Q. How can I help?
A. Pressing THANKS button would be enough.
Click to expand...
Click to collapse
Credits:
1.adityalahiri13- For such a great guide. Thank him too
2. Paranoid Android Team- For such great efforts on such great ROM.​
Reserved
Sent from my ST21i2 using xda premium
wow it will try this, if heped i ll press thanks
This is a great idea,but when i run this as a regular user,it extracts everything ok and asks if i want to replace all the term.nfo files,then it finishes and closes,so i tried running it as admin and same thing.it extracts the roms,but thats about it for me,im on windows 7 professional.I read the OP,am i missing something?I have everything i need installed.
Diablo67 said:
This is a great idea,but when i run this as a regular user,it extracts everything ok and asks if i want to replace all the term.nfo files,then it finishes and closes,so i tried running it as admin and same thing.it extracts the roms,but thats about it for me,im on windows 7 professional.I read the OP,am i missing something?I have everything i need installed.
Click to expand...
Click to collapse
Sorry can't get ur error properly can u send some screens? Also I've tested it and it works ok.. but still I'll try my best to help u out
Press THANKS if I helped,
Best Regards,
AJ
alokbina is now Abhinav2
Greetings, i have just tried your tool, after extract of CM and PA roms when i'm asked to press any key i get some error and cmd closes by itself, i cannot see the error, since it closes after 0.1sec when the error appears
Try hypercam to record or press prnt scrn fast...I do the same..
Press THANKS if I helped,
Best Regards,
AJ
alokbina is now Abhinav2
If the tool isn't running at all for you guys, you are either trying to run the .bat file from within the zip, or you extracted the zip file wrong.
Extract the zip with Winrar.
Just right click the file and select "Extract Files..." than click OK.
I haven't tried porting this yet but the tool itself works just fine.
m4nu4l said:
Greetings, i have just tried your tool, after extract of CM and PA roms when i'm asked to press any key i get some error and cmd closes by itself, i cannot see the error, since it closes after 0.1sec when the error appears
Click to expand...
Click to collapse
Extract files to just to short path, for example to "c:\porting\" or "d:\porting\".
This problem shows when .bat is deep in folder.
I am really excited for this tool. THANKS
I extracted the files and attempted to run the tool, but it closes after CM and PA are extracted. Is there something I am doing wrong. I have a Maguro (GSM Galaxy Nexus). Base ROM = CM10.1 (4/22) and Port ROM = PA 3.16 (4/16). After ROMS are extracted, the tool closes. Tool is located in G: Porter
aiinjylls said:
I am really excited for this tool. THANKS
I extracted the files and attempted to run the tool, but it closes after CM and PA are extracted. Is there something I am doing wrong. I have a Maguro (GSM Galaxy Nexus). Base ROM = CM10.1 (4/22) and Port ROM = PA 3.16 (4/16). After ROMS are extracted, the tool closes. Tool is located in G: Porter
Click to expand...
Click to collapse
Now after so many reports I think there's some fault with the tool...though I checked it..still if u can try to get the error it's best..anyways I'll try to fix this today itself
Best Regards,
AJ
alokbina is now Abhinav2
Is this still alive? Just curious, thx.
Sent from my Smooth(ROM) Kindle Fire
Diablo67 said:
This is a great idea,but when i run this as a regular user,it extracts everything ok and asks if i want to replace all the term.nfo files,then it finishes and closes,so i tried running it as admin and same thing.it extracts the roms,but thats about it for me,im on windows 7 professional.I read the OP,am i missing something?I have everything i need installed.
Click to expand...
Click to collapse
m4nu4l said:
Greetings, i have just tried your tool, after extract of CM and PA roms when i'm asked to press any key i get some error and cmd closes by itself, i cannot see the error, since it closes after 0.1sec when the error appears
Click to expand...
Click to collapse
aiinjylls said:
I am really excited for this tool. THANKS
I extracted the files and attempted to run the tool, but it closes after CM and PA are extracted. Is there something I am doing wrong. I have a Maguro (GSM Galaxy Nexus). Base ROM = CM10.1 (4/22) and Port ROM = PA 3.16 (4/16). After ROMS are extracted, the tool closes. Tool is located in G: Porter
Click to expand...
Click to collapse
I'm really sorry guyz it was my mistake....fixed the tool now Please forgive me if possible guyz....Enjoy :good:
Cheers,
AJ
Do we redownload?
I took a look at main.bat ( noticed a spelling error in command goto del *it said delco* )
I think Bootloop2.bat may have errors. I get system cannot find specified file
Sent from my Galaxy Nexus using xda premium
Getting SOrry error porting.Please Check you have done everything properly
aiinjylls said:
Do we redownload?
I took a look at main.bat ( noticed a spelling error in command goto del *it said delco* )
I think Bootloop2.bat may have errors. I get system cannot find specified file
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Yes I fixed the errors and now it will work
nlygamz said:
Getting SOrry error porting.Please Check you have done everything properly
Click to expand...
Click to collapse
I've checked it thrice man...just tell me in detail wat all happens....
Cheers,
AJ
stuck in bootloop....damn man.....the PA logo just goes on and on
I redownloaded and it runs through completely without errors
- it skips the build.prop prompt though
The Bootloop.bat runs smoothly
The Bootloop2.bat always gives me "file not found"
I have not successfully booted a ROM, but its working for me
Sent from my Galaxy Nexus using xda premium
nlygamz said:
stuck in bootloop....damn man.....the PA logo just goes on and on
Click to expand...
Click to collapse
Please run the bootloop batch scripts and then try to do a logcat.
Cheers,
AJ
ran bootloop and bootloop2 ....it runs fine now....just need to do some manual handwork in it! Thanx man! Appreciate your help
---------- Post added at 09:37 AM ---------- Previous post was at 09:18 AM ----------
http://postimg.com/image/138000/paport-137438.jpg <<< Check this out @Abhinav2

[ROM][STOCK][FLASHABLE ZIP][JB.1.2][BELL SGH-I757M ONLY] Samsung Stock Rom

STOCK ROM JB 4.1.2 FOR BELL CANADA SGH-I757M (FLASHABLE ZIP)
*** NEW AROMA INSTALLER FOR STOCK JB 4.1.2 ***
***************************************************************************
WARNING
***************************************************************************
I assume no responsibility in the event you brick your device. Make sure you have read the instructions before flashing as they may slightly differ from what your used to.​
Click to expand...
Click to collapse
About This ROM:
Hey guys, so Samsung has finally released JB 4.1.2 for the Bell Canada SGH-I757M, which is currently only available through the sammobile.com website and through Samsung KIES. The download zip contains a tar.md5 file and includes a 3e Recovery partition. That's bad news for those of you with a custom recovery. It will be overwritten and you'll have to go through flashing your custom recovery partition again.
So I bring you a Stock Flashable zip that won't replace your custom recovery. That way you can try the new stock rom without loosing root or your custom recovery.
The only credit I assume here is putting the zip package together which involved using @dsixda Kitchen (thanks dsixda). I also added root to this package so that you can have a fully rooted Stock Rom.
Click to expand...
Click to collapse
Images:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Instructions:
*** MAKE SURE YOUR BATTERY IS AT LEAST 75% OR MORE BEFORE FLASHING ***
Before you flash this ROM, you will need a custom recovery installed. I recommend Philz touch recovery found here:
[celoxhd][SGH-I757M][CWM Advanced Edition] PhilZ Touch
*** UPDATED: July 31, 2013 v3 - See second post for changes ***
Those of you looking for a flashable zip for rooting that works with the tar.md5 JB rom from sammobile.com, use this one:
CWM-SuperSU-v0.99.zip - I did not put this package together, it was given to my be another member, but it worked when others did not.New Instructions (Aroma Installer):
Instructions for the Aroma Installer version is extremely simple, there is no need to wipe data/format cache/format dalvik-cache as the Installer will take care of that for you if you want it to.
*** ALWAYS REMEMBER TO TAKE A NANDROID AND ALL YOUR NECESSARY BACKUPS BEFORE FLASHING ***
The one zip file contains all of the modems (ICS & JB), the new playstore app (install optional) and all mods. Just download the zip file and flash it like you would any other ROM, then you will be taken through a series of installer screens that will allow you to choose which apps, mods and modems you want to install.
Download:
Aroma Installer for Stock JB 4.1.2 from Samsung v3 - 794.9MB
New Instructions (Aroma Installer):
Instructions for the Aroma Installer version is extremely simple, there is no need to wipe data/format cache/format dalvik-cache as the Installer will take care of that for you if you want it to.
*** ALWAYS REMEMBER TO TAKE A NANDROID AND ALL YOUR NECESSARY BACKUPS BEFORE FLASHING ***
The one zip file contains all of the modems (ICS & JB), the new playstore app (install optional) and all mods. Just download the zip file and flash it like you would any other ROM, then you will be taken through a series of installer screens that will allow you to choose which apps, mods and modems you want to install.
Download:
Aroma Installer for Stock JB 4.1.2 from Samsung v3 - 794.9MB
Click to expand...
Click to collapse
*** For change log, tips and tricks and FAQ, please go to the second post ***
ENJOY!!!
Change Log
*** UPDATED: July 31, 2013 v3 ***
-Aroma Installer now used for flashing
- Option to do a clean install. Will format your /system, /data, /cache and /preload partitions, no need to factory reset before flashing.
- All modem firmwares included with installer
- Option for rooted/non-rooted install
- Option to install the new Google Play Store app
- All mods are included with installer (install optional)
- All stock apps included with installer (install optional)
- Some stock apps placed in /preload/system/app to save space on the /system partition
- Some Google apps placed in /data/app to save space and for easy deletion
Duplicate build.prop entries removed
- All apps are current as of this release
- Additional utility apps included with installer (install optional)
- Install only the mods and apps you want
*** UPDATED: May 12, 2013 v2 ***
- Full Stock/Debloated Stock
- De-Odexed
- All system apps now located in /system/app
- Unsecured Kernel (allows adb to run in root mode)
- su binary and supersu.apk installed for root permission
- Busy Box shell for installed for better control via a terminal emulator (terminal emulator not included yet)
- Busy Box run-parts (init.d) support enabled to allow for running custom shell scripts at boot
Tips and Tricks (This should no longer be needed if your using the Aroma Installer)
The tips and tricks for this phone have been graciously contributed by xda member @rukusx7. Please press the thanks button on his post if it helped you out:
rukusx7's tweaks to improve device performance.
MODS
Extended Power Menu MOD
To apply the Extended Power Menu MOD, download the following zip to your sdcard as it needs to be flashed from CWM:
MOD_SGH-I757M_STOCK_JB_EXTENDED_POWER_MENU.zip (19.6MB)
1. First take a nandroid backup since we are modifying system files and can easily soft brick our phone by doing this.
2. Flash the MOD from CWM, and restart your phone.
Please be aware that the phone doesn't like to start up for the first time after you flash this mod, you will get stuck at the bootloader screen (not sure why). This is easily overcome by pressing and holding your power button for a hard reset (Hold it for about 10 to 15 seconds. You will feel it vibrate). It should then get past the boot screen. If that did not get you past the boot screen, restore your nandroid backup and try again. If the problem still persists. Post a message and I'll see if I can help you out
S-Voice (like apple's SIRI)
Here is a CWM flashable zip that will install the Galaxy S4's S-Voice onto your SGH-I757M. S-Voice is Samsung's SIRI clone. It seems to work fairly well so far. Just a little slow at times. Just download this zip to your sdcard, make a nandroid backup, and flash this zip. This will install S-Voice on your device. (It may force close on you a couple of times when you first open it up. Just keep opening it up until the force closes stop).
SGH-I757M-SVoice-MOD (62.4MB)
Thanks to @cabetoguerra for finding this leaked apk. Other files and libs were gathered by me and mostly found from a zip file created by xda member zoot1.
FAQ
Q. After I flash the Rom, I get FC's (force closes) like crazy, and I'm gonna pull my hair out!
A. If you did not expressly follow the instructions above, go back and read them. You must format the system, cache and data partitions manually in addition to the regular method.
If you did read and follow the instructions and are still getting FC's. Try the whole process over again and flash the Rom twice just to make sure it fully flashed and all the scripts ran successfully.
Thanks to @4runner10 for actually having to try this
Q. I'm on a Telus network and I get no data connection.
A. Check out this post: http://forum.xda-developers.com/showthread.php?t=1987678 for Telus APN settings as they differ from Bell APN settings.
Thanks to @rukusx7 for the tip
*** reserved ***
Download doesn't work.... Requests permission even when logged in
Sent from my SGH-I757M using Tapatalk 2
dmeinder said:
Download doesn't work.... Requests permission even when logged in
Sent from my SGH-I757M using Tapatalk 2
Click to expand...
Click to collapse
I do apologize, I forgot to allow access to it.... it should be fixed now.
Sent from my SGH-I757M using xda premium
is possible root it room?
shadow404040 said:
is possible root it room?
Click to expand...
Click to collapse
It's already rooted
Sent from my SGH-I757M using xda premium
i update for kies is diponible.
please send me the tutorial for rooted and files
thanks
shadow404040 said:
i update for kies is diponible.
pleasThanks to jonnyb for providing me the e send me the tutorial for rooted and files
thanks
Click to expand...
Click to collapse
Use dsixda's tutorial for Clockworkmod here:
http://forum.xda-developers.com/showthread.php?p=27326599
Then download and flash this zip file (not mine):
http://bit.my/13IiJRT
which pushes su and superuser.apk to your phone. Then your root
Sent from my SGH-I757M using xda premium
first time I flashed the rom (followed instructions), was getting FC's during initial setup. i'm going to try a clean install again.
4runner10 said:
first time I flashed the rom (followed instructions), was getting FC's during initial setup. i'm going to try a clean install again.
Click to expand...
Click to collapse
Did you format the partitions as described in the instructions? I was having that same issue until I formatted the partitions.
Sent from my SGH-I757M using xda premium
Maybe try flashing twice just to be sure
Sent from my SGH-I757M using xda premium
BTW thanks a ton for doing this man. looking forward to seeing the stock jb
---------- Post added at 01:53 AM ---------- Previous post was at 01:52 AM ----------
titanic_fanatic said:
Maybe try flashing twice just to be sure
Sent from my SGH-I757M using xda premium
Click to expand...
Click to collapse
yeah, i always used to flash the rom twice but didn't bother this time. might want to mod the instructions! that did the trick, i also wiped the dalvik after the rom and modem were flashed. no idea if that would make a diff tho!
seems pretty smooth during setup!
4runner10 said:
BTW thanks a ton for doing this man. looking forward to seeing the stock jb
---------- Post added at 01:53 AM ---------- Previous post was at 01:52 AM ----------
yeah, i always used to flash the rom twice but didn't bother this time. might want to mod the instructions! that did the trick, i also wiped the dalvik after the rom and modem were flashed. no idea if that would make a diff tho!
seems pretty smooth during setup!
Click to expand...
Click to collapse
Wicked I'll add that right now. Thanks for the feedback
Sent from my SGH-I757M using xda premium
Hmm. Kept getting fc when trying to open settings. I'm back to dadoes for the time being. Thanks again for your work on this man!
4runner10 said:
Hmm. Kept getting fc when trying to open settings. I'm back to dadoes for the time being. Thanks again for your work on this man!
Click to expand...
Click to collapse
I think it might have to do with the new partition and it's weird symlinks. I'll look into moving these files back into the /system/app folder. Hopefully that will help fix the fc's
Sent from my SGH-I757M using xda premium
Cool man. Glad u know more about this than me! I'll await the next version whenever you get around to it.
thanks titanic_fanatic update and root 4.1.2 thanks thanks
Yay! This is going to be fun. Thanks titanic!
Sent from my SGH-I757M using xda premium
Wow amazing! Thanks very much. Had given up on Samsung creating a stock jb ROM for this phone.
Curious if there will be a de-bloated version soon?
Sent from my SGH-I757M using xda app-developers app

Categories

Resources