Database Users

[HELP] My TAB stop at the boot screen after flash

Hi all, I've just bought a Galaxy Tab last week, today I flashed it to the firmware JMI from the samfirmware.com . However, after flashing, it didn't work. It stopped at the boot screen and I couldn't enter the recovery mode by volume up+power.
Anyone know the solution pls help me to save my Galaxy Tab
thanks

This should be in the general section not development.
From the Tab.
www.twitter.com/ayman07

eragon8687 said:
Hi all, I've just bought a Galaxy Tab last week, today I flashed it to the firmware JMI from the samfirmware.com . However, after flashing, it didn't work. It stopped at the boot screen and I couldn't enter the recovery mode by volume up+power.
Anyone know the solution pls help me to save my Galaxy Tab
thanks
Click to expand...
Click to collapse
Flash the JMI from Rotohammer in Odin and you will be fine again. restart youre tab in download modus. Volume down+powerbutton. The roms from samfirrware suck.

Heppieboeddah said:
Flash the JMI from Rotohammer in Odin and you will be fine again. restart youre tab in download modus. Volume down+powerbutton. The roms from samfirrware suck.
Click to expand...
Click to collapse
I tried but the Galaxy tab still stopped at the boot screen

eragon8687 said:
I tried but the Galaxy tab still stopped at the boot screen
Click to expand...
Click to collapse
In Odin click repartion, load/use the pitfile that can be found on Roto's server.
In Odin click PDA, load/use the RotoJMI-Rom

eragon8687 said:
Hi all, I've just bought a Galaxy Tab last week, today I flashed it to the firmware JMI from the samfirmware.com . However, after flashing, it didn't work. It stopped at the boot screen and I couldn't enter the recovery mode by volume up+power.
Anyone know the solution pls help me to save my Galaxy Tab
thanks
Click to expand...
Click to collapse
You have a locked bootloader because all new firmwares on samfirmware have locked bootloaders
Search for bootloader patch in this forum. Apply and flash what you want thereafter
Never flash directly from samfirmware

WILL PAY $30 to anyone that fixes my Verizon Galaxy Tab!!!

I recently purchased an off contract Verizon Tab from a friend.
I had successfully rooted it using the superoneclick.exe file.
I since decided to flash Overcome_v1.2.1 with Odin using the exact steps as listed & even watched the video 2x.
"Click start and wait for PASS! to show highlighted green on Odin.
9. Your Galaxy Tab will Reboot, and get stuck on the Samsung Boot Screen. This is fine.
10. Turn your Galaxy Tab off by holding the power button for about 5 seconds.
11. Turn your Galaxy Tab on into RECOVERY mode (Press Volume UP and Power On at the same time).
12. The Galaxy Tab will now perform the EXT4 conversion.
13. Sit tight, depending on how much data you have, this can take quite a long time.
14. Once finished, click reboot system now (by pressing the power button)."
Now...I don't know what "quite a long time" is but after 30mins, there was still nothing but a blank sceen w the tell tale sign of a light, thin, margin type as seen on the video.
I then followed these steps:
"IF your Tab does not boot after flashing the kernel and hangs at the Samsung Galaxy Tab screen, you must follow the following procedure
1.Get a stock rom package (any of Rotohammer's firmwares will work)
2.Get P1_add_hidden.zip attached to this post and extract the P1_add_hidden.pit file
3.Using Odin 1.7, put stock rom (Roto-JME-Full-v4.tar for example) in PDA slot.
4.Put P1_add_hidden.pit in Pit slot
5.Check repartition box
6.Put Tab in download mode by holding Volume Down and Power, connect to the computer, and press start.
7.After this, the Tab will reboot normally. Shut it down and return to download mode.
8.Open Odin 1.7 and reconnect the Tab.
9.In the PDA slot, choose the Overcome Kernel v2.0 tar file for use with Odin. Press start
10.It will flash the kernel then reboot. Upon reboot, you should hear the sexy robot voices informing you of the status of the EXT4 conversion.
11.Once done, the Tab will boot normally. At this point you can load Overcome v1.2.2 rom (or any other Rom of your choosing)
12.NOTE - Overcome 1.2.2 includes v2.0 of the kernel, so no reflashing is required after install."
I never got past the part in step 10 to hear any responses. And instead of searching for one of Rotohammers FIRMWARES as suggested, I input a kernel from Voodoo!
Now I can STIL get into DL mode but whenever I try a normal reboot or recovery, it runs through -Wiping DATA- Formatting DATA---DATA: Wipe failed!
over and over until the Tab reboots and when the samsung splash screen somes up, there is a weird "flashing" of the screen in multiple colors.
PLEASE...for God's sake...with all the great inds on here, someone help me!
Please email me @ [email protected] or call/txt me on my GV # 401-213-9555 I will PayPal or Wire someone a "service charge" for their assistance!
Thank you & I hope i did not break any rules on here by asking.

You need to find a stock Verizon firmware and flash through Odin
I just did a brief search and found this: http://forum.xda-developers.com/showthread.php?t=855415
But I'd ultimately recommend flashing this: http://forum.xda-developers.com/showthread.php?t=941749
And you may need to flash this to get to a stage where you have a working recovery image: http://forum.xda-developers.com/showthread.php?t=941781
Hope this helps

TheGrammarFreak said:
You need to find a stock Verizon firmware and flash through Odin
I just did a brief search and found this: http://forum.xda-developers.com/showthread.php?t=855415
But I'd ultimately recommend flashing this: http://forum.xda-developers.com/showthread.php?t=941749
And you may need to flash this to get to a stage where you have a working recovery image: http://forum.xda-developers.com/showthread.php?t=941781
Hope this helps
Click to expand...
Click to collapse
Thank you very much! I will attempt that. I seem to be stuck in DL mode though.
I was downloading in Odin and the Tab has been stuck at 95% for the past 30mins.
Should I power off or is it a sure fire way to brick it?

dvargas72 said:
Thank you very much! I will attempt that. I seem to be stuck in DL mode though.
I was downloading in Odin and the Tab has been stuck at 95% for the past 30mins.
Should I power off or is it a sure fire way to brick it?
Click to expand...
Click to collapse
Assuming there are no bootloaders being flashed you can't really make it un-recoverable. What exactly were you flashing?
Sent from my GT-P1000 using XDA App

Originally? Just the overcome_v1.2.1 kernal.

dvargas72 said:
Originally? Just the overcome_v1.2.1 kernal.
Click to expand...
Click to collapse
Kill the the current Odin flash. Then flash the k-lean kernel. Reboot into recovery. Flash k-lean ROM
Sorted
Sent from my GT-P1000 using XDA App

I want that money!
From the Tab.
www.twitter.com/ayman07

LOL...Get this working for me! My patience is wearing thin now..lol.
But if the advice from The Freak, he earned it

Any idea why it keeps getting hung up right about 99%?

hi
hi friend
i had simmilar problems in past.
Maybe you have problems with the usb ports of your machine.
If you have amd/sis/via for usb chipset at your computer try to do the procedure with another machine with intel chipset.
I hope this helps you

dvargas72 said:
Any idea why it keeps getting hung up right about 99%?
Click to expand...
Click to collapse
Its getting stuck there because you're flashing a GSM ROM to a CDMA Tab
Sent from my GT-P1000 using XDA App

PM me and ill guide u step by step. send me a friends request.

Problem with Start up

Got 7.7 from HK about 1 month ago. Rooted and all was working fine. Last nite, I started and got the Galaxy Tab 7.7 splash screen, that at the Samsung screen I got these blue lines running in the screen. I brought up the bootloader screen and it says in the updating applications "cp.file:failed from /preload/Samsung/Video/lightness.&.slimness.mpf to /data/media/Samsung/Video//lightness.&.slimness.mpf
copy application failed"
How do I fix this? Do I need to reinstall firmware. I tried hard reset but did nothing. Stays in Samsung screen.

Sounds like something corrupted the file system.
Try to see if Kies will recognise the tab in recovery or download/Odin mode. If yes, try the Kies Emergency Recovery.
If not, you may have to reinstall the firmware using Odin. There's a guide on how to do that in the development section.

Thanks for the info. I will try Kirs first.

How to Re-stock P1000 to Gingebread 2.3 | Guide with Links

NOTE : this is not my own procedure but i just wanna share this with you guys since some tab users here are having problems restocking their tab to gingerbread, i have also added some notes and troubleshooting in case there will be an issue flashing the rom
link to the original post credits of course to the writer > how to restock p1000 to gingerbread 2.3
btw, this is a complete and full tutorial/step-by-step guide on how to restock gingerbread rom, so if you did not download all requirements, restocking wont be successful
my story and experience : hey guys, yesterday night, i softbricked my galaxy tab p1000 which was running cm9, it turned out like that when i went to recovery and wipe all data, cache, dalvik, even system, and boot. i tried reflashing the cm9.zip but as it was installing its update, my tab suddenly boot into battery icon, meaning it was already empty (maybe, dont have any idea), then, since it was already 12 midnight, there were no internet cafes open in our village, so i went out though somehow it might be dangerous for me, then, i found an internet cafe open. i rent a pc, first, i tried to go to download mode, so some drivers will be installed, but it kept showing "unkown device recognized" bla bla.. still.. i didnt lose hope. so i searched on google, and i found this site > http://suzhipackz.blogspot.com/2012/07/how-to-re-stock-samsung-galaxy-tab.html , when i finished downloading odin, i opened it to check whether it will read my device or not, first three attempts, it did not. so, i thought of downloading samsung kies so the drivers will be installed (safest way really to install samsung drivers), then i still looked for a smaller file (while waiting for kies to complete its download), then i found that there is a smaller zip file for you to install samsung drivers (see attachment below), i installed it, but still odin cant detect my device (try it, might be just on the pc i rented), so i just waited for kies to complete.. after a couple of minutes, successfully downloaded kies, and installed it. i tried connecting tab to pc with odin opened, i rebooted to download mode again and reconnect tab to pc, and voila! odin read my device! so, since pc has already detected my device, i just waited about 1 1/2 hours for the rom and the pit file and the db data file.... after almost 2 and half hours of crossing fingers, i have revived my tab and restocked it to gingebread 2.3!
HOW TO RESTOCK SAMSUNG GALAXY TAB p1000 to 2.3.3 GINGER BREAD STOCK ROM?
HERE:
- ALL REQUIREMENTS
.......Samsung KIES > LINK FOR SAMSUNG KIES
.......ODIN3 v1.7 > LINK FOR ODIN3 v1.7
.......p1000xxjq1_p1000xxjq1_p1000xxjpz < THIS IS STOCK ROM > LINK FOR STOCK ROM
.......gt-p1000_mr_PIT > LINK FOR PIT
.......dbdata.zip > LINK FOR DBDATA
.......place it all in ONE FOLDER in desktop "unzip it all"
PLEASE DOWNLOAD ALL OF THIS BEFORE YOU CONTINUE..............
PROCEDURE:
.......Turn off tab
.......open ODIN3 v1.7
.......click on the PDA and select - p1000xxjq1_p1000xxjq1_p1000xxjpz in your computer
.......clink on the PIT and select - gt-p1000_mr_PIT
.......Check only RE-PARTITION, "uncheck auto reboot and f.reset time"
.......in your tab press and hold "VOLUME DOWN AND POWER BUTTON"
.......if DOWNLOADING APPEAR leave it like that
.......now, connect you tab in computer
.......if ODIN detects your phone PRESS START in ODIN
.......wait for it until success, after that disconnect your tab
(if for an instance it stuck on downloading mode but you have already finished flashing, do not worry, you just have to manually hold the power button for it to boot up, it might get into recovery, so please reboot the system (it might also be a touch recovery so please tab the home touch key to continue) then if it keeps on booting on "samsung", do not worry, you are not done yet with the restocking procedure, so please proceed to the next step)
.......press and hold power button until it will turn off
.......open ODIN3 v1.7 again
.......UNCHECK it all "re-partition, auto reboot, f.reset time"
.......click on the PDA and select dbdata.zip
.......press and hold "VOLUME DOWN AND POWER BUTTON" again
.......if DOWNLOADING APPEAR leave it like that
.......now, connect your tab again
.......if ODIN detects your phone PRESS START in ODIN
.......wait for it until success, after that disconnect your tab
(again, if it is stuck on downloading mode but you have successfully done the flashing, hold power key to turn the tab on, and if it keeps on booting to "samsung" again, do the next step)
.......This time we will go to CLOCKWORKMOD by holding "VOLUME UP and POWER BUTTON"
(then wipe data, and wipe cache, (volume keys to scroll up or down, and home touch key to select) and reboot system, wait for a minute or two and home screen will now appear)
.........................................NOW YOUR IN STOCK ROM AGAIN 2.3.3 GINGER BREAD
another note : when there is an error for example that flashed on your tab screen like a color red "E:\ " something like that, do not worry, it is the external sd card (i dont have one so it was an error then but not a problem, no worries) just let it be, wait until it finishes
some files are already attached below coz they are just small in size
clicking "thanks" button is enough for me..
just sharing this with you guys...
happy restocking!! :laugh:

Update Prob
mastersymvts said:
I want get full file samsung tab p1000. For flash my tab.. Tq
Click to expand...
Click to collapse
Hi Guys is crashed my tab.
i get it functional with the stock rom 2.3.6
P1000XXJPZ
Kernel 2.6.35.7
[email protected]#2
Build gingerbread.XWJQ8
i wantetd to Flash to a newer rom but noting worked any ideas?
I modified a couple years ago the tab to include the sd space as System space. I do Not rember how i did this....?
If i get throught the stock partion all would be find but i couldn´t.
Regular mod Installation doesnt work, rooting also isn´t possible ...
readin with Heimdall shows this message
Initialising connection...
Detecting device...
ERROR: Failed to access device. libusb error: -12
I hope you guys have any ideas.
Greets

P1000XXJQ1_P1000XXJQ1_P1000XXJPZ.zip do you stil have this?
Hotfile is down

Stock Rom's Link doesn't work
So, I tried your recipe and it worked pretty well for me, but the annoying thing about it was the links to the Stock Rom, so i got the below link as a mirror for those who are interested.
p1000xxjq1_p1000xxjq1_p1000xxjpz < THIS IS STOCK ROM >h-t-t-p-:-/-/-f-i-l-e-s-c-r-o-p-t-u-b-e-.-c-o-m/file/7806957-p1000xxjq1-rar

Couldn't find the given URL
LeMasoud said:
So, I tried your recipe and it worked pretty well for me, but the annoying thing about it was the links to the Stock Rom, so i got the below link as a mirror for those who are interested.
p1000xxjq1_p1000xxjq1_p1000xxjpz < THIS IS STOCK ROM >h-t-t-p-:-/-/-f-i-l-e-s-c-r-o-p-t-u-b-e-.-c-o-m/file/7806957-p1000xxjq1-rar
Click to expand...
Click to collapse
I couldn't locate the file.

need new links. prefer putlocker/mediafire etc.

THKS a Lot!!!!
Great!! many thanks my p1000 have a second life

http://www.4shared.com/get/B-DeOju6/P1000XXJQ1.html here you go its a miracle what using google could do using the right search methods if you would thanks i would really apreciete it guys and gals.

I just flashed my tab stock 2.3.6 from cm11 using odin. But stuck in bootloop. After going to recovery i get error message (red) as in pic. Where did i go wrong?

Thank you for this and sorry for reviving an old thread. It sucks when links go dead (or offer that sketchy ilivid crap). Here is a mirror:
Mirror for samsung galaxy tab P1000 stock odin TAR: stock-P1000XXJQ1_P1000XXJQ1_P1000XXJPZ_HOME.tar
https://mega.co.nz/#!7wohlbKT!i3K7lvIfombRdJEzUUP-fiIZQS1qeStOr16tty-T86w
And a mirror to download ODIN 3 v 1.85: odin3-v1.85.zip
https://mega.co.nz/#!W553iL7B!vZTVktUwwg35a_glWGgBEaIDg11JVgkvFZ94mpzECas

2.3...
I think that there was a couple of kernel and Android security flaws in Linux 2.6, not fixed by Samsung Electronics Co. Ltd..

Samsung Tab P1000 stuck in nowhere!
First of all thanks the OP for the brilliant post on how to re-stock GB on P1000.
Earlier today I was fooling around with my P1000 to update it from CM11 to Omnirom 5.0.2, troubles started there. I was trying to install the TWRP recovery over CWM, and that is when all hell broke loose.
1. P1000 couldn't mount my internal SD. The tab was perfectly booting to a previous version of JB CM sapir, which I don't have any clue appeared where from. The storage showed the 2 GB internal memory, but the 12GB internal SD was missing out.
And the CWM errors were E:/can't mound internal SD
2. Now, after wiping data, dalvik, battery stats, formatting and all that, the tab doesn't even boot into the OS. The moment the power button is on, CWM initiates a count down saying, trying to mount SD, but unable to do so. After 20 seconds, the tab starts this whole process again, and thus a loop.
3. I tried to re-stock to GB; but my tab isn't being detected by Odin in download mode. Odin detects the tab when it is turned on and when the tab is on countdown-restart-countdown loop; but not in download mode.
I am a total noob, and I don't want to throw my tab away as I am a student and can't afford to get a new one Someone please help me to fix the issue. Thanks in advance!

PolaritySwitch said:
First of all thanks the OP for the brilliant post on how to re-stock GB on P1000.
Earlier today I was fooling around with my P1000 to update it from CM11 to Omnirom 5.0.2, troubles started there. I was trying to install the TWRP recovery over CWM, and that is when all hell broke loose.
1. P1000 couldn't mount my internal SD. The tab was perfectly booting to a previous version of JB CM sapir, which I don't have any clue appeared where from. The storage showed the 2 GB internal memory, but the 12GB internal SD was missing out.
And the CWM errors were E:/can't mound internal SD
2. Now, after wiping data, dalvik, battery stats, formatting and all that, the tab doesn't even boot into the OS. The moment the power button is on, CWM initiates a count down saying, trying to mount SD, but unable to do so. After 20 seconds, the tab starts this whole process again, and thus a loop.
3. I tried to re-stock to GB; but my tab isn't being detected by Odin in download mode. Odin detects the tab when it is turned on and when the tab is on countdown-restart-countdown loop; but not in download mode.
I am a total noob, and I don't want to throw my tab away as I am a student and can't afford to get a new one Someone please help me to fix the issue. Thanks in advance!
Click to expand...
Click to collapse
Can you flash at least the PIT in countdown mode(after you flashed the PIT, it goes to download mode)

Flash during countdown...
black_blob said:
Can you flash at least the PIT in countdown mode(after you flashed the PIT, it goes to download mode)
Click to expand...
Click to collapse
Thank you! I tried doing that. On the success/failure counter on Odin, it shows as a failure

PolaritySwitch said:
Thank you! I tried doing that. On the success/failure counter on Odin, it shows as a failure
Click to expand...
Click to collapse
Can you try booting the Vol- or the Vol+ button until you see the flashscreen?
Weird.(and making the tablet unbrickable needs a mod which I hope that you don't do)

black_blob said:
Can you flash at least the PIT in countdown mode(after you flashed the PIT, it goes to download mode)
Click to expand...
Click to collapse
black_blob said:
Can you try booting the Vol- or the Vol+ button until you see the flashscreen?
Weird.(and making the tablet unbrickable needs a mod which I hope that you don't do)
Click to expand...
Click to collapse
Well yes, Vol+ takes me to CWM recovery and Vol- takes me to download mode. Odin detects my Tab on CWM; I tried flashing the PIT which resulted in a failure. And on the download mode as I mentioned earlier, Odin doesn't detect my Tab
Well, I am all ears about the mod you're mentioning about, but let's just hope for now that I don't need that

PolaritySwitch said:
Well yes, Vol+ takes me to CWM recovery and Vol- takes me to download mode. Odin detects my Tab on CWM; I tried flashing the PIT which resulted in a failure. And on the download mode as I mentioned earlier, Odin doesn't detect my Tab
Well, I am all ears about the mod you're mentioning about, but let's just hope for now that I don't need that
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1312391

very Helpful
you Saved my life ... thank you veeeeeeeery much

Thanks for sharing this method. I quiet had a problem with the drivers and the link for them isn't available but I got a way to fix it. Thanks anyways.

Can you guys help me out with my p1000 tab too its bootlooped its in a stock recover and unrooted . I tried wiping data but nothing happens

thank you soo much

Please help me! My Note 4 is in "soft brick" ??

I was about to sell my rooted Note 4, and I did a "reset phone" in the settings menu to wipe the data out , so I can sell it. When the phone turned back I saw on the top left a blue "recovery mode" message and the next is my phone black, and on the middle of the screen appear every 5-8 sec a green android logo with "Installing System update" but just for a second, and goes back to black.
And again, and again...
What a hell happened?I am stuck.. I tried to take the battery out , waited and put it back, than I was holding the volume up+home+power on bottoms to get a recovery mode menu, but it does the same "flashing" screen thing.. Please help me I have a buyer for this phone , really need to fix it!

atti_mac said:
I was about to sell my rooted Note 4, and I did a "reset phone" in the settings menu to wipe the data out , so I can sell it. When the phone turned back I saw on the top left a blue "recovery mode" message and the next is my phone black, and on the middle of the screen appear every 5-8 sec a green android logo with "Installing System update" but just for a second, and goes back to black.
And again, and again...
What a hell happened?I am stuck.. I tried to take the battery out , waited and put it back, than I was holding the volume up+home+power on bottoms to get a recovery mode menu, but it does the same "flashing" screen thing.. Please help me I have a buyer for this phone , really need to fix it!
Click to expand...
Click to collapse
Download firmware for your model from www.sammobiles.com extract firmware file ,take your phone in download mode by pressing volume down+home+power .you will see warning screen then press volume up.download odin tool for pc and samsung usb drivers for note 4 then open odin press Ap in odin and select firmware file and hit start,wait until odin pass .and your device will be good to go.

Trex888 said:
Download firmware for your model from www.sammobiles.com extract firmware file ,take your phone in download mode by pressing volume down+home+power .you will see warning screen then press volume up.download odin tool for pc and samsung usb drivers for note 4 then open odin press Ap in odin and select firmware file and hit start,wait until odin pass .and your device will be good to go.
Click to expand...
Click to collapse
The sammobiles website down for maintenence this weekend , great.....

atti_mac said:
The sammobiles website down for maintenence this weekend , great.....
Click to expand...
Click to collapse
Tell me your model and I'll provide you a link to download firmware

Trex888 said:
Tell me your model and I'll provide you a link to download firmware
Click to expand...
Click to collapse
SM-N910T
Will be unlocked after this upload?
Thank you so much, can't wait

If Sammobile is down, you can find lots of Samsung firmwares even for SM-N910T on www.updato.com. Hope this helps.

atti_mac said:
SM-N910T
Will be unlocked after this upload?
Thank you so much, can't wait
Click to expand...
Click to collapse
To be honest i donno about unlocking but here is the link to download firmware
https://www.androidfilehost.com/?fid=24665509702140550

Trex888 said:
To be honest i donno about unlocking but here is the link to download firmware
https://www.androidfilehost.com/?fid=24665509702140550
Click to expand...
Click to collapse
I downloaded from there , opened a zip file copied to a folder. Took the phone in download mode, Opened Odin, clicked on AP and got the file to point ( not a zip file anymore) and hit start.
My phone shows downloading, and like a line started from the left (light blue , but only very short, and doesn't move anymore.
The pc's latest log shows ID:0/003> NON-HLOS.bin
So is it stopped ? the phone said don't turn off target, i don't want to brick it so what to do?

I had no choice i unplug it, and took out the battery, still not brick I started all over again, and now the latest log is : boot.img but the line still not moving...
binary size shows : 3793.1 mb
Update , 2nd time it was moving further.. passed boot, recovery.img, latest log : system.img.ext4. the blue line moved 1/2" and it is stopped again. I don't know what to do...
I am using Odin 3 V3.12

Try odin 3.10 and use pit file with firmware it will repartation your device and hopefully it ahould fix here is the link for pit file
https://mega.nz/#!yE0QkRgR!8DvGvAauRkb-2xmtH_3ZluoYwCvqNaaSOnXMLYB_CAI
Select AP for firmware and PIT for pit file and hit start

Trex888 said:
Try odin 3.10 and use pit file with firmware it will repartation your device and hopefully it ahould fix here is the link for pit file
https://mega.nz/#!yE0QkRgR!8DvGvAauRkb-2xmtH_3ZluoYwCvqNaaSOnXMLYB_CAI
Select AP for firmware and PIT for pit file and hit start
Click to expand...
Click to collapse
Same thing, is it possible the md5 file is not the right one?
Update, I downloaded a different file from the www.updato.com. website , and it is already passed that point when was stuck before. Cross fingers.

atti_mac said:
Same thing, is it possible the md5 file is not the right one?
Update, I downloaded a different file from that other website you guys mentioned, and it is already passed that point when was stuck before. Cross fingers.
Click to expand...
Click to collapse
No the firmware file is correct qnd i have tested it. What is exatly happening while you flash firmware?

Ok, i used that 2nd file, and was everything perfect! I got a message on Odin : "PASS" the phone turned on, passed a Samsung logo, the T-Mobile screen turned on, and the T mobile song, and stuck on that screen....
this is a file I used a second time , and I stuck now at boot by the T-Mobile logo
N910TUVU2DOK2_N910TTMB2DOK2_N910TUVU2DOK2_HOME.tar.md5
and this file was the one stuck always at the beginning :
N910TUVS2EPG2_N910TTMB2EPG2_N910TUVS2EPG2_HOME.tarmd5
just a note, my Note 4 was rooted and It wasn't a latest firmware , actually probably like 8 months old or at least 6 month old firmware on it.
WORKING!! 100% Working. I just took out a battery , and was waiting a bit, turned it back and working! Thank You guys!!

you shoud have clear cache and data through recovery after that successful flash..
but you didn't

atti_mac said:
Ok, i used that 2nd file, and was everything perfect! I got a message on Odin : "PASS" the phone turned on, passed a Samsung logo, the T-Mobile screen turned on, and the T mobile song, and stuck on that screen....
this is a file I used a second time , and I stuck now at boot by the T-Mobile logo
N910TUVU2DOK2_N910TTMB2DOK2_N910TUVU2DOK2_HOME.tar.md5
and this file was the one stuck always at the beginning :
N910TUVS2EPG2_N910TTMB2EPG2_N910TUVS2EPG2_HOME.tarmd5
just a note, my Note 4 was rooted and It wasn't a latest firmware , actually probably like 8 months old or at least 6 month old firmware on it.
WORKING!! 100% Working. I just took out a battery , and was waiting a bit, turned it back and working! Thank You guys!!
Click to expand...
Click to collapse
Wipr cache and make factory reset in recovery to get clean system firmware.