Database Users

HTC HD2 Hung at opening.

My phone is stuck at the opening white screen. HTC writing wont come up and it wont open. i can go into the bootloader. i guess i did something wrong while flashing a rom. can u help me please.
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
this writes in the boot screen.

did you just flash a cooked rom and haven't yet changed the radio?

probably. ive no idea what to do know to be honest ive given it to repair they said the main board needs to be changed but i dont think its a hardware problem. could u tell me what to do. step by step. i flashed a rom thats true but i havent flashed a radio before doing it.

calen8 said:
My phone is stuck at the opening white screen. HTC writing wont come up and it wont open. i can go into the bootloader. i guess i did something wrong while flashing a rom. can u help me please.
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
this writes in the boot screen.
Click to expand...
Click to collapse
I think you forgot to flash Radio ROM - look into thread of the ROM you flashed, there must be info about radios which are "approved"

thing is i dont know which rom is flashed right now and ive no idea about the radio also.

calen8 said:
thing is i dont know which rom is flashed right now and ive no idea about the radio also.
Click to expand...
Click to collapse
First of all - if you want to do something - read first and gather some info, otherwise you'll have problems.
And if the problem really is with radio, then try THIS first, it should help

just flash a high version radio, which should work regardless of what rom is there.
2.12.50.x or 2.10.50, one of them.

I am flashing the radio from sd and it says
00018003
LEOIMG.nhb - FAIL
Radio - Fail
Update Terminate
Update fail

i am no expert but perhaps try following this method picking a rom you like and also an exceptable radio. good luck
http://forum.xda-developers.com/showpost.php?p=6933055&postcount=14111

try flashing a different rom and see what happens

calen8 said:
ive given it to repair they said the main board needs to be changed
Click to expand...
Click to collapse
oh right its been back to service and got refused,
run hspl2,
choose a stock spl (so 1.66.0000 for a normal hd2 or hspl3 and choose 2.08.0000 for a tmous phone,) and send it back again.

hspl wont change the version =(

oh, well all i can suggest then is you try hspl2, ever option, and hspl3, every option, , maybe one of them can trigger the spl to change.

wont work =(

HD2 Bricked?HELP?

EYy guyss
i just got my phone back from the company,
everythings was stock,
so what i did, i tried to install HSPL3_PKG and flashed succesfully SPL 2.08.0000
Then after the reboot, i got ''white htc'' screen, i waited 5min nothing happend.
SO i thought the radio, i have to update the radio...
I tried to install the Radio 2.15.50.14 It failed at 96% (??? why.. idk)
THen i thought, there is no ROM on it, i downloaded ENERGY LEO 29700 (some WM ROM) tried to install it, but it doesnt go further then 0%.
SO im stuck with my hd2 White screen,
when i Hold volume down and start it up
i get:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
The phone just came from back with a new motherboard.
my old one was damaged, i never had problems with flashing....
So any one any advice?
Cheers,

I want a NAND android on it,
for that i have to install SPL 2.08.0000
also a radio above 2.05
my radio was to low, so i tried to update it, but failed,
i dont want that stupid WM,
soo im stuck with SPL 2.08.0000
and radio 2.05
How to get it up running a NAND android, with MAGDLR?

Start over. . . . Task 29 and bring her back to life.
It is not even close to bricked
I know bricked - Bricked = No light, no display, nothing at all 100%
U r just fine. . . . LOL
If that was bricked, I bricked my phone at least a dozen times.

re
try to flash the stock rom

samson_420 said:
Start over. . . . Task 29 and bring her back to life.
It is not even close to bricked
I know bricked - Bricked = No light, no display, nothing at all 100%
U r just fine. . . . LOL
If that was bricked, I bricked my phone at least a dozen times.
Click to expand...
Click to collapse
LOL
Okee,
THen how to get my baby to breath again?

dobreandl said:
try to flash the stock rom
Click to expand...
Click to collapse
flash to the stock rom, from the htc website?
_HTC HD2_RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
is the file name.
can i flash it with SPL 2.08.0000?
i try it now.

yes the original one from site , what rom come with it from htc ?

pokerfreakje said:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
Click to expand...
Click to collapse
It seems you havent proper hard spl your device
you need to install stock original rom first then do HSPL again then you can upgrade your radio or go to Android

Slow down before u really brick your phone. . . . Or get flamed on here to death
In order
1. Task 29
2. Flash to 2.15 radio
3. Flash a stock or stock like ROM
4. Do what ever you want
BUT FIRST OF ALL(LIKE STEP ZERO) make sure you have HSPL

I just Flashed it from,
SPL 2.08.HSPL
TO SPL.2.08.0000
and after ''succesfull'' didnt show ''we hacked it ''
it doesnt go on any more, the battery is full i got another htc hd2 next to me, thats working fine on it.
and now bricked?

We can go one step at a time.
Do you have HSPL?

samson_420 said:
We can go one step at a time.
Do you have HSPL?
Click to expand...
Click to collapse
It doesnt even go on
i think its bricked now,
i get like very weak buz no screen nothing...

Check your PM's

Flash it back to a hspl version the 00000 version is the stock one for warranty purposes ...

How to flash it for warranty purpose? if it doesnt connect to the pc, boatloader any more? because i do have warranty on it..

does it go to bootloader mode press and hold vol down + power together
if it does then its chance to recover it

Nope its bricked,
while i started this topic wondering if it was bricked, i bricked it officially..
and now? sell the parts or something like that?

another questions remains,
what did it brick ?
i mean the last time it was started up,
i flashed SPL-2.08.HSPL to SPL-2.08.0000 (succesfully installed)
then it didnt start up anymore.

You must install 2.08.HSPL, NOT 2.08.0000 !!!!

I talked to someone during the holidays about a bricked HD2 and this is want he told me. "JTAG will be able to fix dead HD2 when flashing a wrong firmware."
Check out his profile and send him a PM. He might be able to revive it for a small fee and shipping cost! He is also super nice!
http://forum.xda-developers.com/member.php?u=416436

[Q] HELP!!! I might have bricked this phone trying to flash a stock rom via SD

Hi all,
I would really appreciate if someone can help me reverse this process. I have an HD2 that i need to restore it back to factory ROM/condition and return it to US T-Mobile. I previously have WP7 on nand, Android on SD, Radio 2.15, with Mgldr 1.13 with HSPL 3.
I followed the procedure for flashing through SD as it will remove the HSPL. So i downloaded the ROM from TmoUS website, renamed the file to LEOIMG.nbh, and put it on a 4gb class 2 (FAT32) card. Enter bootloader mode by holding down volume/power button. Then it said loading and ask if I want to write over the image, select yes ... then it start the process. Though, half way through i receive the error message! Now when i turn the phone on i can't get past the bootloader mode. Just the error message even when I try to flash again via SD (the process doesnt even start - just said "loading" then "not allow" error message). When i get it plugged in to flash via desktop, the device is not recognized by the update utility. I'm not sure what could have gone wrong .. but any help or tips to reverse this process is greatly appreciated.
Thanks guys!!

What does it say in bootloader now?

If i just power it on I get the blank screen that said "error installing rom" with the triangle and the exclamation mark in the middle. If I boot into bootloader mode it will first get to the screen where it said "loading" then shortly it will say "error" and "not allow" then take me back to the bootloader mode. though, I noticed that the SPL is now 3.03 instead of 2.08 .. but other than that, I couldnt find a way to flash it by SD or USB. Any suggestion on this? Thanks for your help Macgnolia!

Sounds like it flashed the correct SPL and may be failing on the ROM flash, it sounds like it may be flashing the correct radio too.
What I would do is keep your phone completely off for about 3 hours, then turn it back on into bootloader, then try the flash again.
It might have some random overheat thing going on or something. Since you're back to stock SPL, go ahead and flash via RUU instead of SD and see if that does anything, it should let you since it's a stock ROM you're flashing.

Yeah I am with Orangekid here it might help to let your HD2 rest for a while so the internal temp is reduced as it my be some kind of freak heat issue right now. The HD2 hates heat incase you did not know this. I would still like to know what the top line of your bootloader says so we will know if you have the right device I.D. and that you are not one of the unlucky people to get a their device I.D. mysteriously screwed up by a stock ROM flash.

I'm at work and can't really play with it but definitely I will try it again jz to see if its the heat issue. Also, you think it could be the issue with the card by any chance? I was reading on flashing with SD and there were some conflicting opinions about the class and format for SD. And this is my wifes hd2 .. she'll probably freak out .. hehehe ... Thanks guys '-)
Sent from my HTC HD2 using XDA App

qdochemistry said:
I'm at work and can't really play with it but definitely I will try it again jz to see if its the heat issue. Also, you think it could be the issue with the card by any chance? I was reading on flashing with SD and there were some conflicting opinions about the class and format for SD. And this is my wifes hd2 .. she'll probably freak out .. hehehe ... Thanks guys '-)
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
card shouldn't matter as long as it's 8gb or less from my experience. Once it's off for a few hours just try to reflash stock via RUU and see what happens.
And yeah, go ahead and load up bootloader first to see what the top line says.

I just tested it again .. same problem! at the top right corner it says "RUUNBH" then the series of lines in the red portion of the screen as follows:
PB81120 SS-B3
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
and if I just power it on it goes to the error message .. then "loading" screen .. then "error" .. then "not allow" .. then back to bootloader mode but the third line now say MicroP-Wrong Platform (0x0)
any suggestion guys??

I thought it might have been that the download rom was corrupted .. went to tmo and download another one .. I tried to flash again .. get from bootloader mode .. then to loading mode .. and just stuck there ..

qdochemistry said:
I thought it might have been that the download rom was corrupted .. went to tmo and download another one .. I tried to flash again .. get from bootloader mode .. then to loading mode .. and just stuck there ..
Click to expand...
Click to collapse
Have you try with different micro sd card?
battery pin check, whether it is bent.
Battery capacity should at least 50%
Did you rename the RUU_signed.nbh to leoimg.nbh?
When you transfer it to sd card, did you using card reader?
Anything is possible. Please take a look of the above check list

I'd be tempted to try a full change of spl, use hspl4 to drop spl from 3.03.0000 down to 2.08.0000 or 2.10.0000, then try first the 2.13 rom and then the 3.14 rom over USB again.

samsamuel said:
I'd be tempted to try a full change of spl, use hspl4 to drop spl from 3.03.0000 down to 2.08.0000 or 2.10.0000, then try first the 2.13 rom and then the 3.14 rom over USB again.
Click to expand...
Click to collapse
Done!! THANK YOU!!!!!
For some odd reasons, my laptop (win7 ultimate) always seems to have connection issues even with chevron for wp7. I plugged it in to my wife's laptop (vista ultimate) and it connects. I was reading your comment on a similar issue in another thread and along with your suggestion here .. I figured it must be HSPL issue. I first used HSPL4 to reinstall 2.08 and immediately mgldr popped up. Then i flash the Tmo stock ROM over it. Then use HSPL4 to flash over (twice) with 3.03 (the one without the HSPL).
It took away the Energy boot screen, now I'm on 3.14 with 2.15 radio. I checked bootloader and it saids the following:
PB81120 SS-B3
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Which is a problem because I checked on the refurbished device they sent and it has SPL 2.10. And so, I put HSPL 3.03 back on there to flash via SD again. Now i run into the same problem I orginally did .. about 20% into the update process and it stops and said update error. Could this be something obvious that I'm doing wrong? and also is there a way to get spl 2.10 without SD flash??
Thanks bud
Edit: I did it again a couple times via SD and it worked! I checked bootloader and it said spl 2.10 so I guess everything is back to stock now. I guess I'm gonna throw it back in the box and send it off. Thank you everyone for the fast reply and for all the help on this issue ... you guys are awesome! Thanks

Stuck in bootloader

Help I am stuck in bootloader. i flashed a tmo us rom on my tmobile hd2 and now i am stuck in the bootloader. the spl changed when i flashed and does after i put hardspl again. Can somebody help me and i have triied installing through sd card and usb.

Are you sure your HD2 is a tmous or eu. If it's call and end buttons are red, it's a TMOUS.
How did you flash the rom. By SD card or by PC via RUU?

Yes it is us because I bought it from T-Mobile and I tried flashing both ways

But, you didn't explain how did you get stuck in boot loader. Didn't you pull the battery?

i pulle dthe battery and put it back in and it still boots into boot loader

i got stuck in boot loader by downgrading from android to wm 6.5

You are telling that your device boots into bootloader pressing the power button and does not perform a normal boot. If so, please state the name of the ROM you flashed and the output of the tri-colour screen.

i flashed the 3.14 one from the official too website

i meant tmobile website

What does the tri-colour screen say?

it says
PB81120 SS-b3
SPl-2.08.HSPL 8G XE
0x05
Cotulla HSPL 0x40

Does the blue colured row say "rom update code" failed. The output you wrote and nothing is wrong with the bootloader and it is normal. I just can't find the cause of it.

Do not waste your time searching for a solution
I've been through the same problem since more than a year and lost a lot of time to solve this problem and I did not find a solution through the Internet
Everything seems sound, but you always boot to bootloader.

it asks for qualcom cmda drivers

you should probably do a factory reset on the phone

saniyal said:
it asks for qualcom cmda drivers
Click to expand...
Click to collapse
No more ideas man.

http://forum.xda-developers.com/showthread.php?t=408105
Try to find something in this topic!

Are you still lost OP?
Sent from my LG-P999 using xda premium

i have the same problem. Just bought today a HTC HD 2 here in Portugal, it is factory unlocked, it brought Android ICS in it, i downloaded PTG latest ROM and rename to leoimg.nbh. it stopped updating, and now i can't do HSPL4 'cause i am on SPL 3.03.0000
and it appears the following on tri-color screen:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
please give me a solution for this problem, please

To fix it, search xda for mtty.exe, than perform task 29 and than task 2a and than task 8, than reboot to 3 color screen again and install oficial ruu wince rom

[Q] Hd2 flashing problem

Hello everyone, I was trying to install new rom by using hd2 toolkit, first I did a task29 then I flashed radio. I mixed the steps and installed hspl, so after that I am not able to install anythink on my phone. First I tried installing Magdlr but it wouldn't passed 0%, then I tried task29 again and 0% again. Then I think the problem would be hd2 toolkit but no, I tried task29 standalone and no work, flashing a radio rom and no work. What can I do now? Thanks in advance..

ejjjjj said:
Hello everyone, I was trying to install new rom by using hd2 toolkit, first I did a task29 then I flashed radio. I mixed the steps and installed hspl, so after that I am not able to install anythink on my phone. First I tried installing Magdlr but it wouldn't passed 0%, then I tried task29 again and 0% again. Then I think the problem would be hd2 toolkit but no, I tried task29 standalone and no work, flashing a radio rom and no work. What can I do now? Thanks in advance..
Click to expand...
Click to collapse
Don't you read things carefully before doing something like this? If you had another phone, there's a chance you could have bricked it by doing something stupid like that.
Are you able to enter the bootloader? What SPL version does it show there? Have you tried flashing a stock ROM via the SD card?

First task29 was completed, then radio rom installed, and then hspl. All done by hd2 toolkit. After that I couldn't able to flash anythink like rom, task29 or else. So my phone only enters when i open it with volume button, else it only displays htc logo.
PB81100 SS-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50

I even tried installing stock rom but still no good! It stucks at loading... screen, help me please!!

hi, check the link Below, does it show the same SPL?

nope, mine is SPL-2.08.0000, but I can change it with hspl4, but can't downgrade it!

ejjjjj said:
First task29 was completed, then radio rom installed, and then hspl. All done by hd2 toolkit. After that I couldn't able to flash anythink like rom, task29 or else. So my phone only enters when i open it with volume button, else it only displays htc logo.
PB81100 SS-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Click to expand...
Click to collapse
U mixed up the sequence mate, the guide says that 1st install HSPL then Task29 then Radio.
Did u still have connection between your phone and computer?
if not try hit reset button while holding down the volume key.

yep, i mixed it. i can reset it but without any rom update or any update (it won't pass 0%) it has no meaning to reset the phone. I have connection between computer via usb in bootloader mode only!

If u can connect the phone to your computer via boot loader that's a good new's mate. There's still hope to fix your phone.
So u currently has SPL 2.08 right?
and please check if u has radio ver 2.15.50.14?
if u has both of this and u still cannot install MAGDLR.
I used to has this problem. After i decided to switch to cLK it Fixed everything.
may be u should try too .
U can do it via HD2tool kit. by connect phone to your computer under bootloader mode (the red green white blue screen)
** Dont' for get to chosing cLK partition that's match your ROM requirement **
after install cLK then install Recovery then Flash the ROM.

thamlim said:
If u can connect the phone to your computer via boot loader that's a good new's mate. There's still hope to fix your phone.
So u currently has SPL 2.08 right?
and please check if u has radio ver 2.15.50.14?
if u has both of this and u still cannot install MAGDLR.
I used to has this problem. After i decided to switch to cLK it Fixed everything.
may be u should try too .
U can do it via HD2tool kit. by connect phone to your computer under bootloader mode (the red green white blue screen)
** Dont' for get to chosing cLK partition that's match your ROM requirement **
after install cLK then install Recovery then Flash the ROM.
Click to expand...
Click to collapse
Please, if you don't know exactly what you're talking about don't give out incorrect information. It is NOT possible to install cLK without HSPL, and thus the Task29 won't work either.
@OP, have you tried installing a stock ROM from the SD card? I'm not sure exactly how to do this (see, not giving incorrect info ) but if I'm not mistaken the procedure is to rename the stock ROM to a .zip extension, unzip it, copy RUU_signed.nbh to the SD card and rename it to LEOIMG.nbh, then enter the bootloader and follow the onscreen instructions. However, please check somewhere else that what I've said is correct as well. From here, you can just flash HSPL then MAGLDR, CWM and a zip ROM.

Problem solved, thanks for your answers!