Database Users

[Q] Unable to boot into recovery mode

I have rooted this device, but it is not booting into recovery mode now while holding down the home and power button.
It is stuck at the HERO screen.
I also tried to flash the recovery image using these commands.
1. Download the latest version of Amon_Ra's Recovery (1.7.0.1).
2. Rename Amon_Ra's Recovery Image to simply recovery.img & move it to the Android SDK Tools folder.
3. Toggle on USB Debugging (Settings » Applications » Development).
4. Connect the HTC Hero (GSM) to the computer.
5. On the computer, open the command prompt/terminal & navigate to the Android SDK Tools folder.
6. Type in the following commands:
adb push recovery-RA-hero-v1.7.0.1.img /sdcard/recovery-RA-hero-v1.7.0.1.img
adb shell
su
cd /sdcard/
flash_image recovery-RA-hero-v1.7.0.1.img
reboot recovery
7. Amon_Ra's Recovery should now be installed on the HTC Hero (GSM).
After the reboot recovery command, the phone reboots and once again it is suck.
Any help?

Hi there,
I'll try and help as best I can...
First question has to be asked... Are you using the GSM version of the HTC Hero or the CDMA one?
2. Does your hero boot at all? Can you get to the lockscreen and use it as a normal mobile?
3. The instructions i see on AmonRA's post are slightly different from your own.
First, make sure you have at least 70% battery
Then, follow your instructions up to step 6. The final "flash_image" part seems incomplete.
You should be typing in:
flash_image recovery /sdcard/recovery-RA-hero-v1.7.0.1.img
Click to expand...
Click to collapse
Hope that makes sense!

Bantu85 is right
and if you changed the name like you said in step 2 to recovery.img you should
use that name instead of recovery-RA-hero-v1.7.0.1.img
grtz

[Q] How To Install Clockwork?

Hello All!
So my gt540 has already been rooted and fastboot works. I have been running a 2.2 rom flashed through fastboot for a few months now, but I would like to get clockwork recovery working now for the added features of flashing zips and restoring and whatnot.
I have has a lot of trouble finding clear directions on how and what to do to get clockwork recovery on this device. Like I said, I already have root and fastboot is working as well. Can anyone please provide me with instructions on what I need to do from this point?
I have looked at this thread already, http://forum.xda-developers.com/showthread.php?t=817903, but I am still unsure of what exactly I am to do. Also, the mirrors are broken on this page.
Thank you for your help!

download the app root toolbox from the market
and then download a recovery .img and go to advance
flash recovery, find the file and press on it.
wait until finish and then all done!
Or here are better instructions!!
http://forum.xda-developers.com/showpost.php?p=16783348&postcount=1
Installing recovery:
You have multiple choices to choose from.
ClockworkMod Recovery 2.5.1.8 (Recommended)
ClockworkMod Recovery 4.x (Recommended but you may run into incompatible .zip files, download the recovery_clockwork_x.x.x.x_swift.zip file)
Amon RA 2.2.1 (Recommended)
Amon RA 1.7.0.1 (Not recommended due to incompatibility with zip files and recovery backups. Also .zips must be signed)
Download the recovery image of your choice (I strongly recommend Clockwork 2.5.1.8)
Next put your phone in Fastboot mode by rebooting then holding Camera+Power, make sure USB Cable is plugged in. Also let Windows search Windows Update for drivers.
Download fastboot.exe from here: http://adf.ly/2M8Hi and extract it to the desktop. Also put the recovery image you downloaded onto the desktop too.
Be sure to have your fastboot drivers installed, if you use Vista/Windows 7 then the driver should be auto-downloaded from Windows Update, if you use XP or the drivers won't install from Windows Update, then look at this.
Open a command prompt and type the following:
Code:
cd Desktop
fastboot devices (if you see ? fastboot then your device is recognized)
fastboot flash recovery name_of_recovery.img
fastboot reboot
When fastboot says rebooting, hold down HOME and wait. You should see clockwork pop up. Recovery is now on your phone. You can delete the fastboot, kdz and recovery file from your pc because we won't be needing them again. Unless you need to use fastboot.exe again, but just download the fastboot.zip again if you need it) The other files, we don't need.
(NOTE: If your phone reboots with no boot logos (LG logo and animation), or when you flash recovery and it doesn't come up, follow the steps found here. Thanks to fishears for the post!)
Now, installing custom ROMs. Pick any ROM you'd like from the ROM Development section, if you can, get the recovery version, it is much easier to install. Determine if it is a recovery backup, or update.zip
Recovery backups usually contain some .img files and a nandroid.md5 file. The folder containing these files will need to go in the sdcard\clockworkmod\backup folder. Flash them by going to Backup/Restore>Restore>Then pick the backup folder.
Recovery update.zips contain three (or four) files/folders:
boot.img (file)
install-busybox.sh (file, only appears in SOME ROMs)
system (folder)
META-INF (folder)
DO NOT EXTRACT THESE, just put the .zip file on your sdcard, then go into recovery and go to install .zip from sdcard>choose .zip>pick the .zip you downloaded. (NOTE FOR SWIFTDROID: You MUST put the update-cm-xxxxx.zip file found in the SwiftDroid_x.x.x.x_Recovery.zip on your sdcard for it to install!!!)
THANKS TO EFFORTLESS FOR INSTRUCTIONS!!

Thank you thank you very much sir!

kweng_ca said:
Thank you thank you very much sir!
Click to expand...
Click to collapse
Ur welcome!
Just thank me!
Sent from my GT540

[Q] ICS 4.0.3 + Root + unlocked bootloader = and now?

Hi Everynone,
Well, this is my forst post here so if I'm doing anything wrong sorry. I will accept any tip to how use the forum as best I can.
Ok, goins into de point: it is my first time using custom roms, rooting and all other stuff with my Acer. I started using the ICS stock leak:
Acer_AV041_A500_0.009.00_WW_GEN1
Now I'm using Acer_AV041_A500_0.014.00_WW_GEN1 from:
http://forum.xda-developers.com/showthread.php?t=1524736
Also, I'm using the ICSRoot version 3.1 (to have root) from:
http://forum.xda-developers.com/showthread.php?t=1520469
And to finish I used this to installing bootloader/fix recovery:
http://forum.xda-developers.com/showthread.php?t=1522384
As everyone can see I'm a noob, but I can learn a little fast
I'm doing all this to try install this rom:
ICS 4.0.3 FLEXREAPER-R5 for CWM or RA recovery flash
http://forum.xda-developers.com/showthread.php?t=1517181
Now I think that all I need is install the RA recovery or CWM. I tried to install the CWM by Android Market using the ROM Manager, but when I do it the system give me a message "rom manager a500 does not have supported clockworkmod recovery".
Can someone help me to install CWM or RA Recovery? Can be showing me some guide (I tried, but I not found).
Regards,
Cristiano Santos
Brazil - SP

Ok,
Less noob now: I saw that I have RA Recovery installed when I did the process from "HowTo Installing the unlocked bootloader and fixing broken recovery in leaked ICS".
The problem is: I can't enter in RA Recovery, unless opening a CMD from my notebook and using the commands:
Code:
adb reboot bootloader
fastboot boot recovery.img (using the recovery_thor17_403.img inside the nvflash directory).
When I use by this way I can enter in Recovery and, for example, make backup from actually nvran to sdcard. But I can't enter using the "Power button + Sound button". If I do it come the "Dead Android with exclamation" in the screen
Any tip?

Same question.
Does anybody can access to CWM recovery with the "volume-/power" command after having used the jm77's method for fixing their bootloader "issue"?

exodusevil said:
Ok,
Less noob now: I saw that I have RA Recovery installed when I did the process from "HowTo Installing the unlocked bootloader and fixing broken recovery in leaked ICS".
The problem is: I can't enter in RA Recovery, unless opening a CMD from my notebook and using the commands:
Code:
adb reboot bootloader
fastboot boot recovery.img (using the recovery_thor17_403.img inside the nvflash directory).
When I use by this way I can enter in Recovery and, for example, make backup from actually nvran to sdcard. But I can't enter using the "Power button + Sound button". If I do it come the "Dead Android with exclamation" in the screen
Any tip?
Click to expand...
Click to collapse
Did you properly flash the modded bootloader blob? Because only flashing a modded recovery will not work
Sent from my A500 using Tapatalk

SOLVED!!!
castafiore said:
Same question.
Does anybody can access to CWM recovery with the "volume-/power" command after having used the jm77's method for fixing their bootloader "issue"?
Click to expand...
Click to collapse
SOLVED!
The problem is: when you use the guide to install the CWM/RA have a file (/system/recovery-from-boot.p) that as "strra" told "reflashing stock recovery whenever you boot into android"!
What you have to solve:
Open the Terminal Emulator inside the tablet and do:
Code:
su
mount -o remount,rw -t ext4 /dev/block/mmcblk0p3 /system
cd /system
mv recovery-from-boot.p recovery-from-boot.p-BKP
[CODE]
Copy "recovery_thor17_403.img" the (is inside the nvflash-A500.zip from the original jm77 thread), open a CMD in your laptop/PC and do
[CODE]
adb reboot bootloader
fastboot erase recovery
fastboot flash recovery recovery_thor17_403.img
That's it! Now we have the RA Recovery!
Don't make a mistake: I'm a completly noob! All I have done was used the all information in this order:
- Installed the ICS from:
http://forum.xda-developers.com/showthread.php?t=1524736
- Rooted using:
http://forum.xda-developers.com/showthread.php?t=1520469
- CWM/RA Recovery using:
http://forum.xda-developers.com/showthread.php?t=1522384
- And to finish used the trip from our buddy "strra" from here:
http://forum.xda-developers.com/showpost.php?p=23223347&postcount=14
Thanks for ALL INCREDIBLE GUYS AND GIRLS here from XDA. I know that I'm a noob (but now I'm a little less lol). Thanks for:
- vache
- blackthund3r
- jm77
- yaworski
- strra

blackthund3r said:
Did you properly flash the modded bootloader blob? Because only flashing a modded recovery will not work
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
Thank for the tip you blackthund3r, but the problem was it:
http://forum.xda-developers.com/showpost.php?p=23223347&postcount=14
As our frind "strra" told: "it's because you didn't delete recovery-from-boot.p from /system and it's reflashing stock recovery whenever you boot into android".
Thank you so much you incredible work blackthund3r. I used another hands-on guide to get root, but your ICSRoot is so far easer!

exodusevil said:
Thank for the tip you blackthund3r, but the problem was it:
http://forum.xda-developers.com/showpost.php?p=23223347&postcount=14
As our frind "strra" told: "it's because you didn't delete recovery-from-boot.p from /system and it's reflashing stock recovery whenever you boot into android".
Thank you so much you incredible work blackthund3r. I used another hands-on guide to get root, but your ICSRoot is so far easer!
Click to expand...
Click to collapse
Okay that did cross my mind. I suppose its the flash-recovery.sh script which I initialises the flash process? And no problem I'm such glad it has helped people =)
Sent from my A500 using Tapatalk

[Recovery][Official]ClockworkMod (CWM) Recovery 6.0.3.6 for Karbonn A21

While searching a working ClockworkMod recovery for my Karbonn A21, I found this site builder.clockworkmod.com
You can upload your stock recovery here and get latest CWM recovery compiled (any phone) ..
You can download CWM recovery for Karbonn A21 (Check Attachment) which I have compiled from stock recovery using above tool. It has touch support and working fine.
No bugs so far...
Prerequisites: Rooted Karbonn A21
Steps to flash recovery using AIO flasher:
1. Download and extract recovery.img from zip.
2. Install AIO Flasher by Fonehacker from here
3. Boot Your Phone In Fastboot Mode( By Pressing power+volume up when switched off, leave keys when green screen appears.)
4. Connect phone to computer (You must have drivers installed or try PdaNet)
5. From AIO flasher menu select recovery. Then select file (i.e. recovery.img)
6. Flash. And Done.
Steps to flash recovery using Terminal Emulator:
1. Download this zip file.
2. Extract the contents anywhere and copy the recovery.img file from there to the root of your SD card.
3. Install “Terminal Emulator” on your phone.
4. Open up terminal emulator on your phone and enter the command
su
5. Giving the "su" command will open a prompt asking you to give superuser rights to the app.
Give the app these rights by tapping the “allow” (or equivalent") button.
6. Then, give this command
dd if=/dev/block/mmcblk0p16 of=/sdcard/originalrecovery.img bs=4096
And finally, enter
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p16 bs=4096
This will flash clockworkmod rcovery on your device.
7. If you want to flash stock recovery back to your device, use
dd if=/dev/block/mmcblk0p16 of=/sdcard/cwmrecovery.img bs=4096
and then
dd if=/sdcard/originalrecovery.img of=/dev/block/mmcblk0p16 bs=4096
Thanks to:
www.clockworkmod.com (for recovery)
Fonehacker (for flashing tool)
www.droidiser.com (for steps of terminal emulator)
Sent from my Karbonn A21
XDA:DevDB Information
Karbonn A21, Tool/Utility for the Android General
Contributors
vinitraje
Version Information
Status: Stable
Created 2014-12-12
Last Updated 2014-12-12

flashing also possible through terminal emulator!!

vinitraje said:
While searching a working ClockworkMod recovery for my Karbonn A21, I found this site builder.clockworkmod.com
You can upload your stock recovery here and get latest CWM recovery compiled (any phone) ..
You can download CWM recovery for Karbonn A21 (Check Attachment) which I have compiled from stock recovery using above tool. It has touch support and working fine.
No bugs so far...
Prerequisites: Rooted Karbonn A21
Steps to flash recovery:
1. Download and extract recovery.img from zip.
2. Install AIO Flasher by Fonehacker from here
3. Boot Your Phone In Fastboot Mode( By Pressing power+volume up when switched off, leave keys when green screen appears.)
4. Connect phone to computer (You must have drivers installed or try PdaNet)
5. From AIO flasher menu select recovery. Then select file (i.e. recovery.img)
6. Flash. And Done.
Thanks to:
clockworkmod.com (for recovery)
Fonehacker (for flashing tool)
Sent from my Karbonn A21
Click to expand...
Click to collapse
i already uploded my recovery for a21 once again y u made thread

It is updated
ch3than said:
i already uploded my recovery for a21 once again y u made thread
Click to expand...
Click to collapse
You version of CWM is 6.0.3.2 and mine is 6.0.3.6
Newer is better
And most of all mine recovery has touch support.
Eklovya had already uploaded recovery before than you. Then why did you upload yours?
Updates keep rolling, we need updated versions with less bugs. That's why I uploaded the recovery. :silly:

kirkirehani93 said:
flashing also possible through terminal emulator!!
Click to expand...
Click to collapse
Yes. I will update the steps using terminal emulator. But these I find simpler. :silly:

*****[TUTORIAL] From Ubuntu Touch or Cyanongen To Flyme *****

You are full of Ubuntu Touch or Cyanogen?
You can flash Flyme, without lost unlocking and nothing!
You have an "A" version of MX4? Not problem, after flashing cyanogen you can do what you want!!
You need only:
- system.img & boot.img : https://mega.nz/#F!hhE0DTyS!uekaJlPEPvLftdp3DMztbA
- Philz for MX4 : https://mega.nz/#!whkgnS4a!BwmYh0y0-GgPtAzC2vbWYo5XWF2mxWYGd-Rl7K_2P-Q
- SuperSU: https://mega.nz/#!Rt80HDyK!FMyiFB3zn6vkAbqEEB6msTHibCSVKoRLmci7L1gXLlA
START:
- Download system.img , boot.img Philz and SuperSU from the link
- Put the files on desktop
- Enable "developer options "
- Open an terminal on desktop
- Write: adb reboot-bootloader
- When the phone is in fastboot write: fastboot devices
- If give : XXXXXXXXXXXXX fastboot (the drivers are ok)
- Write on terminal: fastboot flash system (don't do "enter" but move the system.img on the terminal, now you can do enter)
(This process need more time 5-10 min you can see the % of transfer on phone)
- When system go, don't reboot the phone, write in the same terminal: fastboot flash boot (don't do "enter" but move the boot.img on the terminal, now you can do enter)
- When boot go, write on the same terminal: fastboot flash recovery (and move philz-mx4 on terminal and to enter)
- When recovery go, turn off the phone and turn on with : VOLUME UP + POWER
- When is in recovery go to: install from zip, sideload. Open a terminal on your pc and write: adb sideload (and move supersu.zip on terminal and enter)
- When SuperSu is flashed: adb reboot
WARNING! DON'T UPGRADE THE PHONE FROM MEIZU UPGRADER!! FULL BRICK !!INSTALL CCLEANER AND DELETE THE UPGRADER OF MEIZU FROM SYSTEM APP !!
Remember, you don't need Meizu account you have a real ROOT!!! :good::highfive:
**If google play don't turn on, is ok just reboot 1-2 times (the same for adaway and others program)**
TROUBLE WITH DRIVERS??
Fastboot and ADB : https://mega.nz/#!Jtklibpb!IofiFCOceBhFOF-YUqaZpypNDmB4_2-6Yxs64JXBfCg
.android : https://mega.nz/#!N5FAFRqT!OeCv1hThq9lC8kJq08lfaTuOBZc4KRvtLaMHqsrkTV4
Meizu MX4 Drivers: https://mega.nz/#!Y08WyCwB!mMRFxN_ICQtyeIAy7jdpZYXW68Nib9MnTT-2ooRel6s
UPDATE ONLY FOR NORMAL MX4 WITH CYANOGEN OR OTHER VERSIONS​FOR COMPLETE THE FULL UPDATE DO THIS:
- Download the UPDATE.ZIP official (4.5.7i OR 4.5.6i, your version) ----> https://drive.google.com/folderview?id=0B6gzGcjOrZeBXzhXbWUzd0JQZUU&usp=drive_web
- Flash recovery patched ------------> https://mega.nz/#!hpECQRAa!IFcOdhJp0D1wUTmajO5i4p2gqFyeo0Z6AFkAakhKGEc
- Unpack update.zip, patch uboot.img with patcher.exe
- Repack the update.zip
- Flash it from recovery patched
Now you have an full working unlocked MX4 with Flyme.

internationnal version?

bobslesbricoleurs said:
internationnal version?
Click to expand...
Click to collapse
Yes bro!

How about back to Ubuntu? From cyanogen.

xenchrarr said:
How about back to Ubuntu? From cyanogen.
Click to expand...
Click to collapse
Look this: forum.xda-developers.com/meizu-mx/general/meizu-mx4-how-to-flash-ubuntu-touch-t3210039 :good:

SuperSu link is dead, do you have another one?
Thanks for the post.

peteypeter said:
SuperSu link is dead, do you have another one?
Thanks for the post.
Click to expand...
Click to collapse
Link Updated

Naphtha said:
Link Updated
Click to expand...
Click to collapse
Thanks

@itresw Look this

The first part was successful but then there are some bugs (as you mentioned) so I decided to do the part bellow but then when I tried to update, I am getting a firmware corrupt message. I did it more than ones I can't get the (modified) update.zip flashed.
Thanks,
FOR COMPLETE THE FULL UPDATE DO THIS:
- Download the UPDATE.ZIP official (4.5.7i OR 4.5.6i, your version)
- Flash recovery patched
- Unpack update.zip, patch uboot.img with patcher.exe
- Repack the update.zip
- Flash it from recovery patched
Click to expand...
Click to collapse

itresw said:
The first part was successful but then there are some bugs (as you mentioned) so I decided to do the part bellow but then when I tried to update, I am getting a firmware corrupt message. I did it more than ones I can't get the (modified) update.zip flashed.
Thanks,
Click to expand...
Click to collapse
You can't flash from recovery an full firmware like an normal mx4 android version

Naphtha said:
You can't flash from recovery an full firmware like an normal mx4 android version
Click to expand...
Click to collapse
So I am stuck with a buggy 4.5.6I for now?
Thanks.

itresw said:
So I am stuck with a buggy 4.5.6I for now?
Thanks.
Click to expand...
Click to collapse
You can go back to ubuntu touch if you want or use an cyanogen rom (not bugged)

Naphtha said:
You can go back to ubuntu touch if you want or use an cyanogen rom (not bugged)
Click to expand...
Click to collapse
I am running cyanogen for a couple of days now and I am happy with it (except very loud notifications, I hope it will get solved soon).
Thanks,

itresw said:
I am running cyanogen for a couple of days now and I am happy with it (expect very loud notifications, I hope it will get solved soon).
Thanks,
Click to expand...
Click to collapse
You flashed from this channel? https://emmaus.pro/?dir=MX4_custom_roms/CyanogenMod 12.1

Naphtha said:
You flashed from this channel? https://emmaus.pro/?dir=MX4_custom_roms/CyanogenMod 12.1
Click to expand...
Click to collapse
Yes flashed the custom recovery then rebooted in recovery and flashed the rom in sideload.

@DDemircivi look this thread

From Flyme to Ubuntu Touch
Naphtha said:
You are full of Ubuntu Touch or Cyanogen?
You can flash Flyme, without lost unlocking and nothing!
You have an "A" version of MX4? Not problem, after flashing cyanogen you can do what you want!!
You need only:
- system.img & boot.img : https://mega.nz/#F!hhE0DTyS!uekaJlPEPvLftdp3DMztbA
- Philz for MX4 : https://mega.nz/#!whkgnS4a!BwmYh0y0-GgPtAzC2vbWYo5XWF2mxWYGd-Rl7K_2P-Q
- SuperSU: https://mega.nz/#!Rt80HDyK!FMyiFB3zn6vkAbqEEB6msTHibCSVKoRLmci7L1gXLlA
START:
- Download system.img , boot.img Philz and SuperSU from the link
- Put the files on desktop
- Enable "developer options "
- Open an terminal on desktop
- Write: adb reboot-bootloader
- When the phone is in fastboot write: fastboot devices
- If give : XXXXXXXXXXXXX fastboot (the drivers are ok)
- Write on terminal: fastboot flash system (don't do "enter" but move the system.img on the terminal, now you can do enter)
(This process need more time 5-10 min you can see the % of transfer on phone)
- When system go, don't reboot the phone, write in the same terminal: fastboot flash boot (don't do "enter" but move the boot.img on the terminal, now you can do enter)
- When boot go, write on the same terminal: fastboot flash recovery (and move philz-mx4 on terminal and to enter)
- When recovery go, turn off the phone and turn on with : VOLUME UP + POWER
- When is in recovery go to: install from zip, sideload. Open a terminal on your pc and write: adb sideload (and move supersu.zip on terminal and enter)
- When SuperSu is flashed: adb reboot
WARNING! DON'T UPGRADE THE PHONE FROM MEIZU UPGRADER!! FULL BRICK !!INSTALL CCLEANER AND DELETE THE UPGRADER OF MEIZU FROM SYSTEM APP !!
Remember, you don't need Meizu account you have a real ROOT!!! :good::highfive:
**If google play don't turn on, is ok just reboot 1-2 times (the same for adaway and others program)**
TROUBLE WITH DRIVERS??
Fastboot and ADB : https://mega.nz/#!Jtklibpb!IofiFCOceBhFOF-YUqaZpypNDmB4_2-6Yxs64JXBfCg
.android : https://mega.nz/#!N5FAFRqT!OeCv1hThq9lC8kJq08lfaTuOBZc4KRvtLaMHqsrkTV4
Meizu MX4 Drivers: https://mega.nz/#!Y08WyCwB!mMRFxN_ICQtyeIAy7jdpZYXW68Nib9MnTT-2ooRel6s
UPDATE ONLY FOR NORMAL MX4 WITH CYANOGEN OR OTHER VERSIONS​FOR COMPLETE THE FULL UPDATE DO THIS:
- Download the UPDATE.ZIP official (4.5.7i OR 4.5.6i, your version) ----> https://drive.google.com/folderview?id=0B6gzGcjOrZeBXzhXbWUzd0JQZUU&usp=drive_web
- Flash recovery patched ------------> https://mega.nz/#!hpECQRAa!IFcOdhJp0D1wUTmajO5i4p2gqFyeo0Z6AFkAakhKGEc
- Unpack update.zip, patch uboot.img with patcher.exe
- Repack the update.zip
- Flash it from recovery patched
Now you have an full working unlocked MX4 with Flyme.
Click to expand...
Click to collapse
Any tuto for flyme to UTouch...?
Flyme 4.2.2.2A - Unlocked ( MX4 32GB )

sieload or update
Thanks for the tutorial.
Everything worked fine on EU MX4 Ubuntu ed, except for last step of sideloading supersu. Adbd does not recognize device.
I wonder if it is possible to rename supersu.zip to update.zip and then run it as an recovery update instead?
artyswe

artyswe said:
Thanks for the tutorial.
Everything worked fine on EU MX4 Ubuntu ed, except for last step of sideloading supersu. Adbd does not recognize device.
I wonder if it is possible to rename supersu.zip to update.zip and then run it as an recovery update instead?
artyswe
Click to expand...
Click to collapse
Flash an custom recovery from fastboot and flash the supersu from it or go in advanced options in CWM recovery Philz and re-root the phone. :highfive: