Database Users

HTC HD2 Problems TMobile

I've currently installed the latest HSPL (2.08.HSPL) and it haven't fixed my issues.
Most of the time, my phone shuts down and powers up and it freezes or it vibrates 3 times and freezes. Some times it will turn on and freeze and infinite vibrating. Some times when I'm using Opera, it will just shutdown and freeze on boot.
It have to be the OS, but I just installed GingerBread 2.3.2_V7 but it still freezes and crashes.
Any help?
Thank you.

Try reinstall HSPL 2.08
Do it through bootloader mode/tri color screen remember
Then perform a task 29
Reinstall a radio for your TMOUS HD2, that is compatible with MAGLDR or HSPL.
Then install winmo or MAGLDR. Through tri color screen also.
Or it might be your sd card, Iunno, i've been reading some sd cards freeze the device. So you might as well format your sd card with panasonic formatter. Full format btw.

simon_66 said:
I've currently installed the latest HSPL (2.08.HSPL) and it haven't fixed my issues.
Most of the time, my phone shuts down and powers up and it freezes or it vibrates 3 times and freezes. Some times it will turn on and freeze and infinite vibrating. Some times when I'm using Opera, it will just shutdown and freeze on boot.
It have to be the OS, but I just installed GingerBread 2.3.2_V7 but it still freezes and crashes.
Any help?
Thank you.
Click to expand...
Click to collapse
I think you downloaded and copied a sd Card build to your phone. If it was a NAND ROM you would not have thois problem, plus I just did a search on GingerBread 2.3.2_V7 in the Andriod section for the HD2 and it only pulled up a biuld called "PPC-SHIFTPDA GingerBread 2.3.2 V7 & Desire HD Sense Glass V2", and this is a sd card build. looks like a very nice one too. Click on the link to comfirm that this is correct ass it should take you to the thread on that build.
You can do two things, either try uninstalling the last couple of apps you have resently installed most recent to least recent.This might solve your problem as it might be an app causing the issue.
The other is to do a Hard Reset of your HD2. Now make sure to move anything you want to save like pictures, videos, documents, etc. to your sd card or back them up on a computer first. also use Mycrosoft My Phone or a comprabale app to back up your contacts, favorites, text messages, ect. Cause this will revert your HD2 to like it was fresh brand new fresh out the box. Any way my sugestion to you is to do a Hard Reset of your HD2. tTo do this cut your HD2 off. then hold down the volume up and down buttons and the power button at the same time until you see the tri color screen. once it comes upo press the volume up button and the your HD2 will reset to factory setting.
Now after you do the reset don't just try to reload all of your apps at once.I suggest you do a soft reset(turn phone off for 20 secounds and turn back on) after ever app you reinstall. Reinstalling all your apps at once can cause your HD2 to freeze up on the first reboot of the phone because it is overloaded with the task of making all the needed changes at once using up all of it's CPU resources.This sould resolve your issue.

I did a task 29 and installed WinMo
I still get the 7 vibrate thing on boot. I've found that it only does this when the phone is hot. Is this an error found in every HTC HD2 TMOUS model or is it just me?
Thank you

[Q] (HTCHD2) Android won't startup anymore.

Hello,
My htc hd2 won't start anymore.
When I press the on button it first goes to the Green HTC HD2 letter screen, then the NAND bootingscreen with this text:
aMAGLDR V1.11
by cotulla 2010
booting android from NAND
ANDROID LOAD at **********
From nand
blablabla
etc etc
LOAD DONE!
12345
GO GO GO
And at the end an Android logo with HTC HD2 underneath it.
and then it's starts all over again.
How can I fix this? or restore everything back to the basics of android?
I dont know anymore specs from the Nand build
only it has the CyanogenMod on it and it's Gingerbread.
Plz can anyone help me, I'm gonna fly tomorrow to the States for holydays so I very appreciate it if anyone can help me before I'm gone.
(I'm sorry for my bad english!)
Grtz Jordy

constantly rebooting a few seconds into the sequence is sometimes down to a bent battery pin. check them carefully. Failing that id suspect a fresh flash is in order.

I have a bent battery pin indeed. but i have it since the third day i bought this phone (1,5 years ago).
How do i make a fresh flash ? :$

Before fresh flash .. what has made your Android fall into a bootloop? have you flashed anything via cwm recently? that could be it.

nope did nothing. only thing i did was putting my sd card in my comp, and after that first some apps didn't work correctly, but that happens me all the time. so i reboot and so it all started ...

Can u guys give me a working link to android on the hd2..i only want to boot from sd
Sent from my HTC Glacier using XDA Premium App

Ok,
You didn't turn off your device, you removed the sd card immediately (or unmounted it from settings), right?
You have data2sd enabled on your build, or apps2sd?
Try to remove sd-card and then boot...
If above ddn't work, try to reflash your build through cwm (without wiping data, which will only restore your system to original state) ..
Report back ...
thefuzz03 said:
Can u guys give me a working link to android on the hd2..i only want to boot from sd
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
Would you mind using the search tool and not hijacking other's threads?
here you go: http://forum.xda-developers.com/forumdisplay.php?f=735
Click to expand...
Click to collapse

@Marvlesz; yes i unmounted it from settings, and im using apps2sd
without sdcard he still wont start normally...
could you explain how i do the reflash?
with the volume button down and then start it up it also stays on the colored screen...
I'm sorry but I'm very newbie @ this stuff.

It depends on how you flashed this ROM in the beginning .. ( I assume you did it through cwm)
So get to the website of this rom and download it again (or pass if you have it on your pc)
bootup your phone while holing nothing but the power button, phone will remain on aMAGLDR and won't boot into Android.
Go to option 8. AD Recovery (using volume rockers) and press Green button (dial) ..
A black screen with orange text will appear, remove your sd and put it into your pc, copy your ROM's Zip file and return sd to phone.
Go to "install zip from sd" .. choose second option, and choose the rom.. then hit yes. After it's done, hit on reboot.
Report back ..

Hi. im sorry i didnt listened to you :O
I saw the menu and did the hard reset, everything is gone, but i dont mind, im glad he is working fine again
Thanks for your help!

lol, Im sorry to hear that you lost your information ... I recommend doing NANDROID backups from time to time (from orange menu) as well as apps backups with (titanuim backups) .. even if you messed up with the system files, you still can get it back ..
Anyway Im glad that you phone has come back to life..

Quick
Quick help

im having a problem with my HTC HD2
im having pretty much the same problem..everytime i try to turn it on it loads up all the way to the occupy together screen then it just starts back over again. so i left it on the charger and let it charge for a whole night and its still doing the same thing. i've tried to do a hard reset but my volume down button doesnt work =/ is there something i can download or is there an update that i need for it to work again?! SOMEONE HEEELP!

Need help, dont know what to do!!

okay you guys, i dont know if im posting in the right section or not.. but i figured it would be good to post in the general section.
i have a tmobile hd2... it wont boot. sometimes i get the tmo bootscreen and it gets stuck there, other times its unresponsive, and other times it vibrates seven times and the screen never turns on..
i just want to mae this thing functional again. is there any way i can bring this device back to stock? whether its with a windows rom, or android rom, i really dont care.. lol i just need help. anything would be greatly appreciated.

if you have wp7 on it...your problem is because of incompatible sd card..try another sd card and hard reset

GunbladeGriever said:
okay you guys, i dont know if im posting in the right section or not.. but i figured it would be good to post in the general section.
i have a tmobile hd2... it wont boot. sometimes i get the tmo bootscreen and it gets stuck there, other times its unresponsive, and other times it vibrates seven times and the screen never turns on..
i just want to mae this thing functional again. is there any way i can bring this device back to stock? whether its with a windows rom, or android rom, i really dont care.. lol i just need help. anything would be greatly appreciated.
Click to expand...
Click to collapse
Just thinking it could be a bad battery, but more info would be helpful.

Or check if battery pin is bent
Sent from my HTC HD2 with WP7.5/android miui using tapatalk

battery and pins are fine... th sd card was working before but now the phone seems to have been condemed.. any information you would need just feel free to ask, i dont really know what to tell you guys since i dont know whats wrong with it

I managed to get to the rgb screen.. I'm guessing hspl is installed, because it says hspl on the screen lol.. Any suggestions on what I should do from here?
Sent from my PG86100 using XDA App

that happened to my phone once. i thought my battery was fried or something, but it turned out that my pins were bent. works fine now.
if you can get to the RGB screen, your phone is still safe i believe. Try getting a compatible SD card and then try and flash another WP7 rom. Also make sure your HSPL is 2.08. Anything otherwise, won't boot also.

HSPL must be 2.08.... if any other version, WP7 wont boot... but most of problems in sdcard compatible

task 29, and reinstall hspl , than magdlr. also make sure of bad blocks.

okay, at first i tried an ruu that i got directly from tmo but it would always hang at 8%... then i ran the task 29 file and it went through 100%... im gonna let the battery charge for a little bit since i dont want anything else to go wrong... im going to search on how to install hspl and everything else.. im asuming that i need an sd card for this lol. thanks everyone for the help!

Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
Guys I’m having a similar problem. I had “XBmod-Yuki 2.1” loaded yet I was experiencing sporadic reboots.
I decided to re-flash using the SD card advice provided by XDA site. I purchased a new compatible SanDisk 16gb.
While following the XDA instructions to the letter, I completed the “Flash the ROM with DWI” step (w/ SD Removed) and my phone is now on an endless reboot loop. After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
The phone is not bricked because I can still re-flash the TMO stock 3.14. Yet when I try again, after “123456 GoGoGo” the screen goes dark and reboots; endlessly.
I love Windows Phone 7.5 Mango and I must restore my phone to its glory…
Please help! What do I do to get pass this paralyzing issue???

insert card to phone and turn on with Volume Up + Down + Power together.... when white screen shows, follow instructions on screen...

Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
Thanks for the reply DXDY...
I tried what you suggested. The master reboot completed and the phone rebooted into the same endless reboot loop.
My steps have been to:
reflash stock 3.14; allow complete boot up
install magldar113_daf
delete mbr using magldr113
Enable 24MB extra memory in Magldr services
Flash the rom with DWI...
after i flash the rom it reboots in to the endless loop. it never completes a boot up cycle. Right after "123456 GoGoGo" the "tomobile "stick together" logo flashes and the phone reboots; endlessly...
I have tried different roms; exact same behavior...
it has to be something simple because, the phone is not bricked; I can still re-flash the TMO stock 3.14. The stock ROM works perfectly and my SD card (Sandisk 16gb class 4) still works perfectly also...
Any help you can provide is greatly appreciated...

only problem then is SDcard.... try boot without sdcard for test.....

Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
i have tried reflashing with the SD card in the device and with the SD card removed. Once before i was able to flash the either way (with or without - both ways worked before). Now immediatley after reboot the device enters endless reboot loop...
any help is appriciated...

try with NAND toolkit... http://forum.xda-developers.com/showpost.php?p=19931919&postcount=501
wipe NAND with Task29, check and install again HSPL 2.08
flash WM6.5
flash MAGLDR
after that flash WP7
dont know which other to advice you...

melcad Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endless
what is task29? i understand the other items. i just need clarification on task29...

Task 29 formats the partition drive of your device where the ROM resides.
it's cleaning partition, removing any leftover junks thereby giving a fresh partition for the ROM to operate

Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
Wow, that did it! the task29 cleaned up the NAND as you said and allowed me to reflash WP7...
One last question; when updating WP7 using the cab sender method; may I remove the languages that i dont need from the RAR pack???

incompatible sd card....change and try again with another sd card
dont remove the language cabs...preferred to keep them in

HTC HD2 automatically turns on when battery is inserted

Hi,I have a problem with my HTC hd2 which is when I insert the battery the phone boot up without me even pressing the on button.So was just wondering is there anyone that knows a fix for this problem I'm facing?thanx

Sorry but your problem is strange for me, I suggest you to reset all the phone starting with the task29 to erase the internal rom.

Make a backup of anything you want first then i would start with just a fresh download and install of the ROM your using. If that don't work then I would suggest what adone.h has said to try. Don't forget to wipe data, cache, and delvic if using Android.

Ok thanx for that adobe.h and htccraze, I will give then both a try and keep u posted on what happens.thanx

hmmmm i thought it was common for HD2 to do that or is it only during those HSPL/ radio update this would happen.

OK mengfei,but when i flash a new android rom the nand way and its all booted up and everything,then i press the power button i dont get the screen so the turn the phone off or restart it.Any answers?

Eject battery, let it out for some minutes.
Reset the OS.
If these things above won't work, you have to install a new OS (maybe bootloader has some problems, too). I had this problem, too. Got rid of it by removing the battery for a longer time. Now everything is fine.

it's a weird phenomenom
i got the same problem when i firstly got the HD2
but it automatically disappeared last month after i flash several wp7 roms

I have the same problem

It is a hardware problem in the digitiser/cable/button area.
My touch screen failed, when I got the repaired phone, I had the same symptoms - battery in phone on. Also pressing just the volume down button would boot into the tri-colour screen. This happened with windows or android flashed into nand.
Odd thing was that running the key test function in magldr seemed to work and the power button operated normally as far I could tell when powered up into windows or android.
I sent the phone back for repair again and got a refurb replacement.

I have tried to flash a windows 7 Rom to cure the problem mario_net,but when I trying to flash the Rom it just keeps coming up error near the end of the flashing process.Have u any answers people?

CR5N,just wondered how do u do the key test function in magldr?

DAZZA35 said:
CR5N,just wondered how do u do the key test function in magldr?
Click to expand...
Click to collapse
Apologies, it is under advanced -> key test in cwm (I'm on 5.0.2.6) accessed via magldr recovery.

Let it out for some minutes don't insert battery immediately after removed.

HTC HD2 Hangs on SPL-Screen

Hello,
I recently found back my hold HTC HD2 and when I tried to start it up..It just hangs on the HSPL/SPL coloured screen. When I first powered it up HSPL by Cotulla was on it and it always ran Android.
So I download the Stock Windows Phone ROM from the Internet and installed it, but it still hangs on the HSPL Screen. So I installed the Stock SPL but I didn't help..
Can someone please help me? I really want to use the phone again but it seems there is a problem. There still is a SD-Card in it which has 4GB...Can someone please explain me how to get the phone back to Stock windows phone?

Can someone please help me?

Try removing sd card.
If still same issue leave sd card out & reflash ROM from links below.
flash hard spl 2.08
http://forum.xda-developers.com/attachment.php?attachmentid=522724&d=1298224028
flash htc rom
http://www.androidruu.com/Leo/RUU_L..._Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
* If it a T-Mobile USA hd2 (red endkey & green callkey) then use that model ROM linked below
http://www.androidruu.com/Leo/RUU_L...adio_15.42.50.11U_2.15.50.14_LEO_1.5_Ship.exe
When rebooting also use the soft reset button next to battery & try it a few times if unsuccessful first time booting.
Maybe useful thread > http://forum.xda-developers.com/showthread.php?t=1344958
load of ROM links (working) , tools & HD2 useful info > http://forum.xda-developers.com/wiki/HTC_HD2

I had the same problem bro, do you want android or windows on the phone?

I want the original Windows Phone back on it.

Mister B:
I followed your steps but it didn't fix the problem. When I start up the phone, the three coloured display shows up and it says 'Serial' on the bottom. Tried the reset button several times and even holding down both Volume-buttons to Hard Reset the phone, but it didn't fix the problem.
The phone always worked fine, what is the problem?

Have you tried doing Task29(full wipe) via HD2 toolkit?

Yes, I already tried Task29 before flashing Hard SPL and Original ROM. I really want to get the Phone working again so my Mom can use it!
Hopefuly someone can help my out with this annoying and weird problem.

After installing the stock rom, what did the phone do? Did it restart to the HSPL screen?

Yes, it restarted back to the HSPL screen. It also shows 'Serial' on the bottom and when I connect USB cable It shows 'USB' on the bottom.

Try flashing stock rom from sd card rather than via usb & see what results you get.

I tried flashing the Stock ROM from the SD-card but it didn't help. It still is stuck at the SPL-screen showing 'Serial' on the bottom when I start up the phone.
Which exact ROM do I need to use for a Netherlands(Europa) HTC HD2 (NON-TMOUS!)?
I hope to hear back from you as soon as possible!

Can someone help me please? Tried everything!