Related
I flash a wrong kernel (A Nexus 7 kernel), and my nexus4 become brick. No matter what I did, it still no response. I can't boot to fastboot, even i can't turn it on. Please help....
connect to PC, only show a QHSUSB_DLOAD in Device Manager. But still can't turn it on. Please help, anything i can do to fix it??
Read through the ENTIRE other thread you posted in, all the info is there.
No idea how you accidently flash wrong a kernel for the wrong device.
Get into bootloader mode. (can you? Google on how to do it manually)
Or
Plug the phone in via usb if you had adb used on it and type adb reboot bootloader (hence if use toolkit you won't have this set up.)
Sent from my Nexus 4 using xda premium
These guys are way to eager to flash any and everything on there devices
yyz71 said:
These guys are way to eager to flash any and everything on there devices
Click to expand...
Click to collapse
It just seems impossible on finding kernel for other phones on a nexus 4 forum.
Oh what's this? A link to a flash able zip? Let's flash it without thinking.
Think before you flash op.... And dont use toolkits.
Sent from my Nexus 4 using xda premium
zephiK said:
It just seems impossible on finding kernel for other phones on a nexus 4 forum.
Oh what's this? A link to a flash able zip? Let's flash it without thinking.
Think before you flash op.... And dont use toolkits.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
So true:good:
I can't connect PC with adb. I connect PC can't show the charge icon in my phone. And PC can only identify the device as QHSUSB_DLOAD.
So, what can i do..?
yatyuk said:
I can't connect PC with adb. I connect PC can't show the charge icon in my phone. And PC can only identify the device as QHSUSB_DLOAD.
So, what can i do..?
Click to expand...
Click to collapse
Send that puppy back, & get a new one...
Sent from my HTC One X using xda premium
rayford85 said:
Send that puppy back, & get a new one...
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
I really dislike people recommending to send the phone back (RMA) to Google for a user's own (I'll be polite here) lack of awareness and understanding of what they are doing. This person should continue to look for solutions to get it working and if not.. well, to bad. Lesson learnt. Buy another Nexus 4.
Besides that fastboot should still be accessible. If OP can eventually get into fastboot then all will be well.
Go read read FAQ thread,will show yo proper way to get back to bootloader mood don't be lazy that won't help,agree getting to bootloader mode then fastboot proper n4 kernel.try it on other pc I'd you cannot in this pc,make sure you install the driver.
Read before you ask
Sent from my HTC One X using xda app-developers app
Zackconsole said:
Go read read FAQ thread,will show yo proper way to get back to bootloader mood don't be lazy that won't help,agree getting to bootloader mode then fastboot proper n4 kernel.try it on other pc I'd you cannot in this pc,make sure you install the driver.
Read before you ask
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Bro, i already read some thread... but still not work...i try any combine key with connection to PC, and only red LED appeared few sec and then off again. I think i had driver, because i can use toolkit, unlock and root via adb before. Or can u please give me the link which i need to read? I search about the "qhsusb_dload" problem. Some tell me can easy to fix it by using power+ Vol+/- with connection to PC. But i try many times, still not work... I know i can fix it, if i can enter bootloader. But now i can't turn my phone on.... any suggestion? Thank you.
yatyuk said:
Bro, i already read some thread... but still not work...i try any combine key with connection to PC, and only red LED appeared few sec and then off again. I think i had driver, because i can use toolkit, unlock and root via adb before. Or can u please give me the link which i need to read? I search about the "qhsusb_dload" problem. Some tell me can easy to fix it by using power+ Vol+/- with connection to PC. But i try many times, still not work... I know i can fix it, if i can enter bootloader. But now i can't turn my phone on.... any suggestion? Thank you.
Click to expand...
Click to collapse
Its actually appalling the lack of support users get on here, instead being on point and helping the man out all they get is criticized.
Anyways Back to topic: yatyuk your device isn't bricked it still has life. I had the exact same issue before when connecting to the PC I was also getting the "qhsusb_dload" driver alert.
Click on the Link and Follow the steps if you can get into Fastboot Mode. Check the Post #241 of mine.
LINK
Happy Recovery!
risktaker84 said:
Its actually appalling the lack of support users get on here, instead being on point and helping the man out all they get is criticized.
Anyways Back to topic: yatyuk your device isn't bricked it still has life. I had the exact same issue before when connecting to the PC I was also getting the "qhsusb_dload" driver alert.
Click on the Link and Follow the steps if you can get into Fastboot Mode. Check the Post #241 of mine.
LINK
Happy Recovery!
Click to expand...
Click to collapse
I read your post already bro!! Thanks for your help. But, i don't understand #241. How can I get into fastboot mode?
Is the first step "1) Once in Fastboot mode, through Nexus 4 Toolkit I flashed the Clock Work Recovery. " ?
Now I connect my phone to PC, then Power + Vol- for ~10sec, my phone will had red led for few second and then off again.
risktaker84 said:
Its actually appalling the lack of support users get on here, instead being on point and helping the man out all they get is criticized.
Anyways Back to topic: yatyuk your device isn't bricked it still has life. I had the exact same issue before when connecting to the PC I was also getting the "qhsusb_dload" driver alert.
Click on the Link and Follow the steps if you can get into Fastboot Mode. Check the Post #241 of mine.
LINK
Happy Recovery!
Click to expand...
Click to collapse
Bro, can you please teach me how to enter fastboot mode? I try using all combine key with connection to PC, but only red led appear for few second then off.
I like how all the people who manage to do something so idiotic to these phones band together and stick up for each other. There is no possible way to flash the wrong nexus kernel. any who, the solution has been posted plenty of times. Enter recovery then fast food.
Sent from my Nexus 4 using xda premium
yatyuk said:
Bro, can you please teach me how to enter fastboot mode? I try using all combine key with connection to PC, but only red led appear for few second then off.
Click to expand...
Click to collapse
To get into Fastboot:
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
So for all the people with Bricked devices all hope is not lost. Follow this procedure to get into Fastboot.
1) Press the Power button for more then 5 seconds to do a Hard Reset. This is where you screen is completely turned off.
2) Now take your LG manufactured USB connect it to the PC. Do not connect it to the phone just yet.
3) Holding the Vol Down and Power together and NOW connect your other end of the USB connector to the phone and then your phone should give you a slight vibration and you should see the Fastboot screen (Android lying on the back)
NOTE: Make sure as soon as you see then fastboot mode Let go of the Vol and Power Button right away!
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Click to expand...
Click to collapse
risktaker84 said:
To get into Fastboot:
Click to expand...
Click to collapse
I try many times.....but still can't turn on...
My situation is
1) Press the Power button for more then 5 seconds to do a Hard Reset. This is where you screen is completely turned off.
--->My phone is always turned off, when i disconnect to PC....
2) Now take your LG manufactured USB connect it to the PC. Do not connect it to the phone just yet.
--->This step is ok
3) Holding the Vol Down and Power together and NOW connect your other end of the USB connector to the phone and then your phone should give you a slight vibration and you should see the Fastboot screen (Android lying on the back)
---> when i connect the usb, the phone immediately Red LED on and no vibration. LED on few second, my phone off again and remind no response
Is that mean no hope
yatyuk, use this thread for further inquiry LINK. I don't want to go back and forth in between different threads with the same issues.
Try this,
Did you ever get a Battery sign when you had it connected to the PC or AC for power?
Try this, I don't know if its gonna work or not but plug your phone in the wall receptacle for AC Charge and leave it for a while. On AC, the phone most likely, if completely dead, will stay idle but most likely jump back to Battery sign showing its charging or not.
When that happens, leave like that for a hour or two.
Let me know what happens. Good luck.
Click to expand...
Click to collapse
Thank you for your friendly help
I had read your post already, and i will keep on trying...
Hey guys , my not so smart friend tryed to be smart and tryed to flash custom rom WITHOUT rooting, and WITHOUT any recovery :highfive:. Long story short the phone is bricked completely. Mainly it stuck in LG logo for a long time and sometimes it actually load the system but crashes after a few secs, again, to LG logo.
Is there any way to root the phone without going into the system( usb debugging etc)?
p.s.
tryed to do factory reset and the result as above.
Thank you in advance guys!
After 7 hours I found a solution to this insane situation. I never had to recover such a dead phone. No root, no recovery , no backup, no rom on the device. Any way Im proud of myself
If someone has the same problem I might be able to help!
Seven Winds said:
Hey guys , my not so smart friend tryed to be smart and tryed to flash custom rom WITHOUT rooting, and WITHOUT any recovery :highfive:. Long story short the phone is bricked completely. Mainly it stuck in LG logo for a long time and sometimes it actually load the system but crashes after a few secs, again, to LG logo.
Is there any way to root the phone without going into the system( usb debugging etc)?
p.s.
tryed to do factory reset and the result as above.
Thank you in advance guys!
Click to expand...
Click to collapse
....how did he flash it without recovery? what a dummy...Its bricked... he deserve a $500 brick
U can try to use LG flash tool to fix but I doubt its gonna work, but hey suprise me.
G1_enthusiast said:
....how did he flash it without recovery? what a dummy...Its bricked... he deserve a $500 brick
U can try to use LG flash tool to fix but I doubt its gonna work, but hey suprise me.
Click to expand...
Click to collapse
Yeah, I told him to wait for my help (not that im a pro,but i had some experience rooting and installing roms on htc sensation and now on my galaxy 4)..
Any way, as we speak I am downloading stock rom and will try to use the flash tool but Im really doubtfull It will work as well.
Thank you for the answer!
Seven Winds said:
Yeah, I told him to wait for my help (not that im a pro,but i had some experience rooting and installing roms on htc sensation and now on my galaxy 4)..
Any way, as we speak I am downloading stock rom and will try to use the flash tool but Im really doubtfull It will work as well.
Thank you for the answer!
Click to expand...
Click to collapse
does the computer recognize the phone at all?
G1_enthusiast said:
does the computer recognize the phone at all?
Click to expand...
Click to collapse
After installing the driver, when the phone is powered off, no. When the phone turn on, no. When the operating system turns on, I dont know, not enough time (phone restarts after a few secs).
I do hear the indication sound from windows that something is connected but nothing turns up..
Seven Winds said:
After installing the driver, when the phone is powered off, no. When the phone turn on, no. When the operating system turns on, I dont know, not enough time (phone restarts after a few secs).
I do hear the indication sound from windows that something is connected but nothing turns up..
Click to expand...
Click to collapse
lol I think its good as bricked.
G1_enthusiast said:
lol I think its good as bricked.
Click to expand...
Click to collapse
I did it! wow, took 7 hours ! :victory:
Just so you know how :
1. Need to be in fastboot mode
2.Do like in this thread with the CMDhttp://forum.xda-developers.com/showthread.php?t=2477595
3. Then basicly follow the steps here http://choimobile.vn/threads/huong-dan-cuu-soft-brick-lg-g2-f320s-l-k.12932.html
4. Whats important though I think is turn off your computers internet connection, dont know why, but it will fail otherwise.
Step By step
After you collect those DLL & TOT files, here's step by step :
1. Disconnect any internet connection
2. Set the computer time before Juli 15th, 2012 ( I set March 1st, 2012)
3. Double click LG Flashtool. Username, password, and Registration key are on the link #1 post http://forum.xda-developers.com/showthread.php?t=2396048
4. Insert DLL file in DLL column. Browse to where you put the DLL file.
5. Insert TOT file in Software column. Browse to where you put the TOT file.
6. Click OK
7. Click the GEAR icon, set only port #1 that ticked. Other ports are UNTICKED. Click OK.
8. Press & hold volume UP , while connecting the USB cable to your computer (set to DOWNLOAD MODE). Until the phone shows "DOWNLOAD MODE" on the center of the screen.
9. Open System Properties. Device manager ->Set COM port for LG Handset using port 41.
10. Click Arrow Right in LG Flashtool, disconnect USB cable for 5 seconds. Reconnect USB cable.
11. The FLASH process in progress, wait for 600 seconds and shows green background say "PASS".(In my case at around 86% The phone already worked, the flashtool still did his thing and failed at 90 something percent.Doesnt metter because phone works)
12. Disconnect USB cable and close the LG Flashtool application.
wow props to ya...how did u get the IMEI back?
Why kids messin with phones when they dont know what they doin .. aaahhh
Special thanks to @vovanx500 for original guide. can be found HERE
so i followed the Giude.
here it is
THIS TUTORIAL IS ONLY FOR HARD BRICKED DEVICES.
HARD BRICK MEANS NO FLASHMODE AND NO FASTBOOT.
IN ORDER TO PROCEED DISASSEMBLY OF YOUR DEVICE IS REQUIRED.
IF YOU HAVE WARRANTY,STOP READING THIS, GO THE SONY SERVICE AND PLAY STUPID.
AS AFTER OPENING YOUR DEVICE, YOUR WARRANTY IS 100% VOID.
I AM NOT RESPONSIBLE FOR ANY DAMAGE.
YOU'VE BEEN WARNED.
Let's get started.
1. Download the package HERE
2. Install ggsetup-3.0.0.7.exe HERE
3. Open the back cover of your device.
4. Find the test point (See attachments).
5. Disconnect a battery, connect a usb cable.
6. Using the paper clip connect your test point with the GND. I used the metal shield in the middle of the motherboard.
7. Open the device manager, you should see SEMC Flash Device. If no, you did something wrong.
8. Disconnect your phone from computer.
9, Repeat the step 5.
10.Run the s1tool and select S1 EMERGENCY Mode for the phone type.
11. Press the flash button, and choose that file [ u downloaded] for your device.
12. Press testpoint ready and repeat the step 6.
13. Remove the testpoint and press READY, when program will ask you to do so.
14. If flash was successful, you may disconnect your phone from usb, connect your battery and try to boot.You may have to charge your battery.
15. Now you can flash your device normally using software.
again thanks to those who created guide for Z1 and Z Ultra..
the_laser for making the software.
m not responsible if anything goes wrong
reserved
reerved
Hope ill never need to do so.
Sent from my LG-P880 using Tapatalk
K9998 said:
Hope ill never need to do so.
Sent from my LG-P880 using Tapatalk
Click to expand...
Click to collapse
Me too
Xperia™ Z (C6602) with Tapatalk
Will try this. My Z has been dead for more than 2 weeks now.
Thanks for the guide and the files.
@touseefiqbal: Hi Bro. I don't have SEMC Flash device on device manager. Am I doing it wrongly? Help!
When connecting the usb cable to the computer, are you supposed to have a red LED? I didn't see any in mine. :'(
timchew said:
Will try this. My Z has been dead for more than 2 weeks now.
Thanks for the guide and the files.
@touseefiqbal: Hi Bro. I don't have SEMC Flash device on device manager. Am I doing it wrongly? Help!
When connecting the usb cable to the computer, are you supposed to have a red LED? I didn't see any in mine. :'(
Click to expand...
Click to collapse
did u take out the battery?
@touseefiqbal.
Thanks for the response. I am almost going to throw away my Z.
Yes, I took out the battery as instructed. Took me a while as it was really stuck to the board.
timchew said:
@touseefiqbal.
Thanks for the response. I am almost going to throw away my Z.
Yes, I took out the battery as instructed. Took me a while as it was really stuck to the board.
Click to expand...
Click to collapse
no other option taking to service centre....i loosed my zl like this
SonyRiFle said:
no other option taking to service centre....i loosed my zl like this
Click to expand...
Click to collapse
SONY Service Centre rejected to repair as it's rooted.
timchew said:
SONY Service Centre rejected to repair as it's rooted.
Click to expand...
Click to collapse
Unlockd bl?
Sent from my C6716 using XDA Premium 4 mobile app
SonyRiFle said:
Unlockd bl?
Sent from my C6716 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yes, BL unlocked.
Thanks, Bro @touseefiqbal, for trying to help yesterday. I have re-tried on another laptop. But still same problem. Did exactly what you did but no go.
Am I to give up on my Xperia Z?
Does this solve problem for my devices
Charge- red light after 10min it's gone..no light
Flashmode and fastboot- same as charge..just only get red light...
Phone not detect on computer or flashtool when connect with usb cable
touseefiqbal said:
Special thanks to @vovanx500 for original guide. can be found HERE
so i followed the Giude.
here it is
THIS TUTORIAL IS ONLY FOR HARD BRICKED DEVICES.
HARD BRICK MEANS NO FLASHMODE AND NO FASTBOOT.
IN ORDER TO PROCEED DISASSEMBLY OF YOUR DEVICE IS REQUIRED.
IF YOU HAVE WARRANTY,STOP READING THIS, GO THE SONY SERVICE AND PLAY STUPID.
AS AFTER OPENING YOUR DEVICE, YOUR WARRANTY IS 100% VOID.
I AM NOT RESPONSIBLE FOR ANY DAMAGE.
YOU'VE BEEN WARNED.
Let's get started.
1. Download the package HERE
2. Install ggsetup-3.0.0.7.exe HERE
3. Open the back cover of your device.
4. Find the test point (See attachments).
5. Disconnect a battery, connect a usb cable.
6. Using the paper clip connect your test point with the GND. I used the metal shield in the middle of the motherboard.
7. Open the device manager, you should see SEMC Flash Device. If no, you did something wrong.
8. Disconnect your phone from computer.
9, Repeat the step 5.
10.Run the s1tool and select S1 EMERGENCY Mode for the phone type.
11. Press the flash button, and choose that file [ u downloaded] for your device.
12. Press testpoint ready and repeat the step 6.
13. Remove the testpoint and press READY, when program will ask you to do so.
14. If flash was successful, you may disconnect your phone from usb, connect your battery and try to boot.You may have to charge your battery.
15. Now you can flash your device normally using software.
again thanks to those who created guide for Z1 and Z Ultra..
the_laser for making the software.
m not responsible if anything goes wrong
Click to expand...
Click to collapse
my can't detect semc flash..so what's wrong
Levered said:
my can't detect semc flash..so what's wrong
Click to expand...
Click to collapse
bro you need to reinstall the drivers again. then make sure u connecting points with gnd without battery properly
touseefiqbal said:
bro you need to reinstall the drivers again. then make sure u connecting points with gnd without battery properly
Click to expand...
Click to collapse
Does this driver work successfull with windows 7 64bit?
Levered said:
Does this driver work successfull with windows 7 64bit?
Click to expand...
Click to collapse
i tried on 32 bit for my xperia z. when it was dead
Levered said:
Does this driver work successfull with windows 7 64bit?
Click to expand...
Click to collapse
make sure when u attach the test points with GND. red led light shud b turned on.,.. if not. then u doing something wrong
touseefiqbal said:
make sure when u attach the test points with GND. red led light shud b turned on.,.. if not. then u doing something wrong
Click to expand...
Click to collapse
i tried to do the steps step by step but the led still blue !!!!
do you know why ??
abaza1 said:
i tried to do the steps step by step but the led still blue !!!!
do you know why ??
Click to expand...
Click to collapse
blue means u r in fastboot mode. flash files with flashtool
i dont know what to do
i just flashed this rome into my G2:
http://forum.xda-developers.com/lg-g2/development/rom-cloudyg2-t3006744
the problem is that my phone is D802 so i flashed the wrong rome :crying::crying::crying:
now my phone stuck on FASTEBOOT MODE
i cant get into recovery mode or download mode, i just dont know what to do!
Now i stuck on security error and the device on loop
Also, the pc isnt reconizing the phone
halotzi said:
i dont know what to do
i just flashed this rome into my G2:
http://forum.xda-developers.com/lg-g2/development/rom-cloudyg2-t3006744
the problem is that my phone is D802 so i flashed the wrong rome :crying::crying::crying:
now my phone stuck on FASTEBOOT MODE
i cant get into recovery mode or download mode, i just dont know what to do!
I'm desperate, i want to cry becouse i just fixed it!
What can I do?? pleaseeee help me!!:crying:
Click to expand...
Click to collapse
Calm down son, just follow this guide by bender http://forum.xda-developers.com/lg-g2/help/fixing-fastboot-mode-started-t2930963
Fastboots not that bad of a place to be
Art Vanderlay said:
Calm down son, just follow this guide by bender http://forum.xda-developers.com/lg-g2/help/fixing-fastboot-mode-started-t2930963
Fastboots not that bad of a place to be
Click to expand...
Click to collapse
I dont really understand what needs to be done
I dont know what is my imei, iis a really big problem
I just need to run RUN_THIS.bat?
halotzi said:
I dont really understand what needs to be done
I dont know what is my imei, iis a really big problem
I just need to run RUN_THIS.bat?
Click to expand...
Click to collapse
Show me your software information, I'll dump the partitions and link them to you.
Then you put them in the folder with all the adb stuff.
Then you connect your phone and run the batch file
Art Vanderlay said:
Show me your software information, I'll dump the partitions and link them to you.
Then you put them in the folder with all the adb stuff.
Then you connect your phone and run the batch file
Click to expand...
Click to collapse
I have LG G2 32GB D802
It's enough or you need more information?
halotzi said:
I have LG G2 32GB D802
It's enough or you need more information?
Click to expand...
Click to collapse
That's fine. I'll have them ready for you tomorrow. Its 12 am here already
Art Vanderlay said:
That's fine. I'll have them ready for you tomorrow. Its 12 am here already
Click to expand...
Click to collapse
OK! Thank you very much! But please dont forget
IMPORTANT:
The computer does not reconize myG2 even there is a sound from the computer when i connect him
this is writing on my device when i connect:
-reset-
-portchange-
-reset-
-portchange-
stall get_descriptor 128 6 1536 0 10
fasteboot: proocessing commands
Click to expand...
Click to collapse
halotzi said:
OK! Thank you very much! But please dont forget
IMPORTANT:
The computer does not reconize myG2 even there is a sound from the computer when i connect him
this is writing on my device when i connect:
Click to expand...
Click to collapse
Try installing pdanet if your phone isn't recognised. It'll install the adb drivers for you.
Here are the 3 files. Just put them in the put_files_here folder and run the batch file. After it's all done you can boot into download mode and flash back to stock
https://www.dropbox.com/s/9p2gu9643ll6del/aboot_229376.bin?dl=0
https://www.dropbox.com/s/3cse678pqjbfww6/boot_262144.bin?dl=0
https://www.dropbox.com/s/zzbrhzzznzcpkm4/laf_589824.bin?dl=0
Art Vanderlay said:
Try installing ]
Click to expand...
Click to collapse
I need to connect the phone into the computer before i install pdanet? Or install pdanet and then connect the phone?
Becouse i connected the phone into the computer and then I started the install but it is on "Updating PdaNet on your phone" for 10 minutes
So i instelled the files and its write "scourty error", what to do??? (ןi cant get into download mode and recovery)
halotzi said:
I need to connect the phone into the computer before i install pdanet? Or install pdanet and then connect the phone?
Becouse i connected the phone into the computer and then I started the install but it is on "Updating PdaNet on your phone" for 10 minutes
So i instelled the files and its write "scourty error", what to do??? (ןi cant get into download mode and recovery)
Click to expand...
Click to collapse
Make sure your phones fully powered off. Hold the power button for about 10 seconds. And then try putting it in download mode
Art Vanderlay said:
Make sure your phones fully powered off. Hold the power button for about 10 seconds. And then try putting it in download mode
Click to expand...
Click to collapse
I tried it, i cant reach safe or recovery mode...
Sorry for the late replay, I sent the phone to a store to fix it but they just broke the screen (and fixed it)
So... what can I do?
UP
UP
UPPPPP
Art Vanderlay said:
Make sure your phones fully powered off. Hold the power button for about 10 seconds. And then try putting it in download mode
Click to expand...
Click to collapse
i cant get into download mode or recovery, nothing
The PC isnt reconizing the phone at all
halotzi said:
i cant get into download mode or recovery, nothing
The PC isnt reconizing the phone at all
Click to expand...
Click to collapse
Send me your teamviewer password. I'll have to have a look at this.
Also, download a kdz and follow this guide up to step 6. Make sure you have these ready
Art Vanderlay said:
Send me your teamviewer password. I'll have to have a look at this.
Also, download a kdz and follow this guide up to step 6. Make sure you have these ready
Click to expand...
Click to collapse
Where is the guide?
I live in israel so we have diffrent hours but i will stay up for every hour you would say
Do you have skype or facebook that we would chat there?
halotzi said:
Where is the guide?
I live in israel so we have diffrent hours but i will stay up for every hour you would say
Do you have skype or facebook that we would chat there?
Click to expand...
Click to collapse
Sorry its over here http://forum.xda-developers.com/showthread.php?t=2666967
Download your kdz from here. http://lg-phone-firmware.com/mobile/index.php?id_mod=36We just want the about, boot and laf out of them. It might take some time to download, just let me know when you finish
Art Vanderlay said:
Sorry its over here http://forum.xda-developers.com/showthread.php?t=2666967
Download your kdz from here. http://lg-phone-firmware.com/mobile/index.php?id_mod=36We just want the about, boot and laf out of them. It might take some time to download, just let me know when you finish
Click to expand...
Click to collapse
I finished the guide and i did everything up to step 6
halotzi said:
I finished the guide and i did everything up to step 6
Click to expand...
Click to collapse
Great. Rename the aboot, boot and laf to aboot.img, laf.img, and boot.img. Now download VMware and slax.
Were going to follow this guide. I have to go to bed now, just familiarise yourself with the guide and send us a pm in the morning
So guys, i have tried to downgrade my phone from android 7.1.1 to 6.0 which ended in a softbrick, after that i tried 2 flash a stock rom but that completely bricked it and now my phone wont dont anything anymore except for some kind of mode that my computer can detect in device it sees the qualcomm port 9008 device but there a thing it just wont work miflash doesnt recognize it and i cant find any sollutions online please help
tnhx
Daan_K said:
So guys, i have tried to downgrade my phone from android 7.1.1 to 6.0 which ended in a softbrick, after that i tried 2 flash a stock rom but that completely bricked it and now my phone wont dont anything anymore except for some kind of mode that my computer can detect in device it sees the qualcomm port 9008 device but there a thing it just wont work miflash doesnt recognize it and i cant find any sollutions online please help
tnhx
Click to expand...
Click to collapse
I wonder:
-Which is your phone model, as stated on the back of the phone?
-Which is the file that you used to downgrade?
-Which stock rom did you try to flash?
The fix is pretty simple but seeing how you borked three simple procedures I'd like to know everything and lay it out for you precisely. You have to have done something horribly wrong to softbrick a phone with the stock updater system...
Choose an username... said:
I wonder:
-Which is your phone model, as stated on the back of the phone?
-Which is the file that you used to downgrade?
-Which stock rom did you try to flash?
The fix is pretty simple but seeing how you borked three simple procedures I'd like to know everything and lay it out for you precisely. You have to have done something horribly wrong to softbrick a phone with the stock updater system...
Click to expand...
Click to collapse
Okay at first my phone model on the back of my device is, as i mentioned before, "zte a2017g" thats the european version of this phone, chinese is "a2017" and the us version is "2017u".
The file i used 2 downgrade was the stock rom from the official website of zte
it was the full edl file buildnumber b10.
and again i once sofbricked it, i know how 2 fix that, but now it hard bricked, well i think so at least, i cant get it to boot into bootloader, recovery or anything, when i hold the power button it shakes the device, and it shows the zte logo for about 2 seconds then it disappears, and nothing happens but my computer does recognize it as a connected device but i cant use miflash of something else because those programs dont see it.
Daan_K said:
Okay at first my phone model on the back of my device is, as i mentioned before, "zte a2017g" thats the european version of this phone, chinese is "a2017" and the us version is "2017u".
The file i used 2 downgrade was the stock rom from the official website of zte
it was the full edl file buildnumber b10.
and again i once sofbricked it, i know how 2 fix that, but now it hard bricked, well i think so at least, i cant get it to boot into bootloader, recovery or anything, when i hold the power button it shakes the device, and it shows the zte logo for about 2 seconds then it disappears, and nothing happens but my computer does recognize it as a connected device but i cant use miflash of something else because those programs dont see it.
Click to expand...
Click to collapse
all right. it's still freaking weird. Use my DFU unbrick guide but only do step 4 and 5 (but use the files on the top anyways)(you just have to hold Vol+ and Vol - and insert the cable instead of taking the phone apart and shorting pins). After that check the driver, if it is still Qualcomm HS-USB QDLoader 9008 then flash with MiFlash, if not, tell me what appears
Choose an username... said:
all right. it's still freaking weird. Use my DFU unbrick guide but only do step 4 and 5 (but use the files on the top anyways)(you just have to hold Vol+ and Vol - and insert the cable instead of taking the phone apart and shorting pins). After that check the driver, if it is still Qualcomm HS-USB QDLoader 9008 then flash with MiFlash, if not, tell me what appears
Click to expand...
Click to collapse
allright allready thanks loads for your support but could you maybe send the right file to flash because i have no idea, and please, the files for a2017g not a2017 or a2017u thankyou so much
Daan_K said:
allright allready thanks loads for your support but could you maybe send the right file to flash because i have no idea, and please, the files for a2017g not a2017 or a2017u thankyou so much
Click to expand...
Click to collapse
they are in the guide. at the top, there's a link to WesTD's EDL flashable files. Get one for A2017G, for example B09
Choose an username... said:
they are in the guide. at the top, there's a link to WesTD's EDL flashable files. Get one for A2017G, for example B09
Click to expand...
Click to collapse
Allright, thankyou so much my dude
Choose an username... said:
all right. it's still freaking weird. Use my DFU unbrick guide but only do step 4 and 5 (but use the files on the top anyways)(you just have to hold Vol+ and Vol - and insert the cable instead of taking the phone apart and shorting pins). After that check the driver, if it is still Qualcomm HS-USB QDLoader 9008 then flash with MiFlash, if not, tell me what appears
Click to expand...
Click to collapse
aight, as i thought this didnt work, i tired it but miflash basicly just gave me an error notification.
also when i go into device manager i can see that my device is connected but i show the name with a yellow triangle with a ! in it i have no clue what this means can u please help me with this. i rlly want my phone back
Daan_K said:
aight, as i thought this didnt work, i tired it but miflash basicly just gave me an error notification.
also when i go into device manager i can see that my device is connected but i show the name with a yellow triangle with a ! in it i have no clue what this means can u please help me with this. i rlly want my phone back
Click to expand...
Click to collapse
First of all, if you get an error TELL ME what it says!
Send me a screenshot of the device manager, i can do very little with "yellow triangle"
Don't bother? That guy is using XDA as a free emergency support without looking for one second.
He probably would like you to do a teamviewer while he's watching football with a beer and not even say thank you.
I'm horrified.
RedWave31 said:
Don't bother? That guy is using XDA as a free emergency support without looking for one second.
He probably would like you to do a teamviewer while he's watching football with a beer and not even say thank you.
I'm horrified.
Click to expand...
Click to collapse
rlly m8. im just a guy who needs help with his phone the guy "choose a username..." i helping me with it, ive been unable 2 fix my phone with any of the other threads i just need some help and i have said thanks alot, dont call me that
Daan_K said:
rlly m8. im just a guy who needs help with his phone the guy "choose a username..." i helping me with it, ive been unable 2 fix my phone with any of the other threads i just need some help and i have said thanks alot, dont call me that
Click to expand...
Click to collapse
Sorry, I don't believe you for one second. Like litterally THOUSANDS of people here and here opening "bricked plz hlp" threads, you didn't even have the BASIC, LOWEST courtesy of writing more than 10 words of gibberish whining about your situation, without a single usefull element of context.
Proof of that in the NUMEROUS questions asked about ELEMENTARY elements about your situation. You're litterally the kind of person that would go to a car mechanic, drop the keys on the counter saying "my car is broken, fix it" and just leave without a single word added. That's RUDE and, yeah, I'm tired AF of people like you who can't READ THE DAMN XDA RULES and got NOT education whatsoever.
Nd writng frm a phone in T9 mde dsnt rlly bring nythng mre on the tble either.
Too bad you found somebody to help, as it's only encouraging that kind of behaviour.
//Rant off//
@Daan_K this EDL Tool can help https://forum.xda-developers.com/axon-7/development/axon-7-edl-tool-flash-backup-restore-t3750759
Choose an username... said:
First of all, if you get an error TELL ME what it says!
Send me a screenshot of the device manager, i can do very little with "yellow triangle"
Click to expand...
Click to collapse
this is a screenshot of my device manager, and what I meant with yellow triangle, also it doesn't work with the edl-tool nor the axon7tool
Daan_K said:
this is a screenshot of my device manager, and what I meant with yellow triangle, also it doesn't work with the edl-tool nor the axon7tool
Click to expand...
Click to collapse
Okay, let's try two things:
First right click on it and uninstall the device, also delete driver software for the device (it will be a checkbix asking for that after you hit 'uninstall device'). After that, hold Volume up, Volume down, and Power until the Device manager refreshes. After that the driver should reinstall itself. If it still shows with the yellow triangle, right click it, click on Properties, and send me a screenshot (or translate me what it says on the status part)
https://forum.xda-developers.com/axon-7/how-to/a2017-4th-category-brick-repair-manual-t3585898
if you can only get to dfu mode and nothing else, use thise guide, you'll have to dismantle your phone. Had to unbrick mine with this from a hardbrick, worked flawlessly
IvI97 said:
https://forum.xda-developers.com/axon-7/how-to/a2017-4th-category-brick-repair-manual-t3585898
if you can only get to dfu mode and nothing else, use thise guide, you'll have to dismantle your phone. Had to unbrick mine with this from a hardbrick, worked flawlessly
Click to expand...
Click to collapse
Hey, a couple of things: one, i've updated the guide, it's around, much simpler to use. just saying. Two, this guy has the right driver. Don't confuse him with DFU while at least for now it is not.
Choose an username... said:
Okay, let's try two things:
First right click on it and uninstall the device, also delete driver software for the device (it will be a checkbix asking for that after you hit 'uninstall device'). After that, hold Volume up, Volume down, and Power until the Device manager refreshes. After that the driver should reinstall itself. If it still shows with the yellow triangle, right click it, click on Properties, and send me a screenshot (or translate me what it says on the status part)
Click to expand...
Click to collapse
omg the triangle is gone, thankyousomuch, but what can I use now 2 fix it further?? is that in your guide maybe?
choose an username... said:
hey, a couple of things: One, i've updated the guide, it's around, much simpler to use. Just saying. Two, this guy has the right driver. Don't confuse him with dfu while at least for now it is not.
Click to expand...
Click to collapse
omygod it ****ing working, choose an username man, i can't thank you enough, seriously ur the best man lots of love for doing this