[Q] Ics too much wifi power - Eee Pad Transformer General

Hi all,
I think to open a new problem after Ics update :
with honeycomb I had not noticed problem, but with Ics taking My Transformer on the knees I feel a lot of heat alt my stomach and belly and I think Ics among his innovations took also a major Power to wifi.
Someone noticed this? Or can confirm the powered wifi?
Thx in advance.

I haven't noticed any heat issues and I'm over clocked at 1.4ghz.

Nope, no issues here even after pushing it for hours @ 1.4Ghz.
For normal usage like browsing, chatting, watching videos (not the super-demanding ones) the only heat felt from the device is that from my hands
In fact, only times it gets "hot" (actually, "warm" is more correct) is when Im charging it - which is completely normal.

Related

Overheating

This thing gets hot! Just been configuring launcher pro which took around 5 minutes and wasn't data intensive and the back of the phone is really hot. So much that I can smell the plastic heating up! The battery drained real fast during the process too.
Anyone else experiencing this ?
Well that doesn't sound good! I haven't had anything like that. Have you checked the power intake?
Sent from my GT-I9100 using Tapatalk
steve228uk said:
Well that doesn't sound good! I haven't had anything like that. Have you checked the power intake?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Good point, where can I check the power intake?
Thanks
mwatson said:
This thing gets hot! Just been configuring launcher pro which took around 5 minutes and wasn't data intensive and the back of the phone is really hot. So much that I can smell the plastic heating up! The battery drained real fast during the process too.
Anyone else experiencing this ?
Click to expand...
Click to collapse
Mine got really hot the first day I used it (27/4)...I was just checking out features and installing a few apps. I rebooted it after the battery was fully charged and it's been fine ever since.
Sent from my Galaxy S II using XDA Premium
I have the exact same problem, it happens especially when I play any games or intensive appliaction. The battery drains and it gets hot next to the camera, I suspect this is where the cpu lives. Do you think its because its rooted? because I rooted it as soon as I got it so I dont know what it was like before.
And as I am away from the uk for the next six weeks I cant even send it back to O2
No nothing to do with root, mine was same before and after, pretty normal to get hot on some demanding apps.
shohid1234 said:
I have the exact same problem, it happens especially when I play any games or intensive appliaction. The battery drains and it gets hot next to the camera, I suspect this is where the cpu lives. Do you think its because its rooted? because I rooted it as soon as I got it so I dont know what it was like before.
And as I am away from the uk for the next six weeks I cant even send it back to O2
Click to expand...
Click to collapse
vimto25 said:
No nothing to do with root, mine was same before and after, pretty normal to get hot on some demanding apps.
Click to expand...
Click to collapse
And i thought i was alone...
It gets really hot sometimes though, not to the extent of burnt plastic smell but it gets pretty uncomfortable touching around lens at the back.
I've been going through this this morning. It seems that the CPU loves to go up to 1.2GHz even if it doesn't need to be that high (and it stays there). Also there I've also been noticing through ADB shell that their are a few niggles. For example the wi-fi sharing process can start without even being activated.
For example this was a ADB shell top taken while running Cordy downclocked to 800MHz in setcpu. The phone was a tiny bit warm but only by the camera (where the CPU is). Basically, this just shows that if you are playing a game, nothing else is going on so the CPU shouldn't be going up to 1200MHz. And it plays the same as when it isn't underclocked.
I'm currently assisting Pulser with investigating this until he gets his SGS2.
Fysi said:
I've been going through this this morning. It seems that the CPU loves to go up to 1.2GHz even if it doesn't need to be that high (and it stays there). Also there I've also been noticing through ADB shell that their are a few niggles. For example the wi-fi sharing process can start without even being activated.
I'm currently assisting Pulser with investigating this until he gets his SGS2.
Click to expand...
Click to collapse
My phone gets very hot at time too...
I also noticed wifi sharing starting up by itself. Yesterday it started by itself and used 10% battery usage even though I had wifi switched off the entire time..
BoogWeed said:
My phone gets very hot at time too...
I also noticed wifi sharing starting up by itself. Yesterday it started by itself and used 10% battery usage even though I had wifi switched off the entire time..
Click to expand...
Click to collapse
Do you have root and Titanium/MyBackup Pro?
If you do, freeze anything that mentions wifi sharing, unless you are going to use wifi hotspot and kies air a lot.
mwatson said:
This thing gets hot! Just been configuring launcher pro which took around 5 minutes and wasn't data intensive and the back of the phone is really hot. So much that I can smell the plastic heating up! The battery drained real fast during the process too.
Anyone else experiencing this ?
Click to expand...
Click to collapse
I posted on this a few days ago..
My phone got so hot that it shut itself down!
since that i have done a complete reset of the phone and started from scratch again....100% better.
The problem as i see it is with all the 'tinkering' that we users do. All the additional launchers etc and widgets that you add really seem to mess the phone up!
My advice is keep the phone as samsung intended it...or at least change very little. You will see far improved battery life and none of the over heating problems.
Just my opinion but its worked for me.
hpsauce37 said:
I posted on this a few days ago..
My phone got so hot that it shut itself down!
since that i have done a complete reset of the phone and started from scratch again....100% better.
The problem as i see it is with all the 'tinkering' that we users do. All the additional launchers etc and widgets that you add really seem to mess the phone up!
My advice is keep the phone as samsung intended it...or at least change very little. You will see far improved battery life and none of the over heating problems.
Just my opinion but its worked for me.
Click to expand...
Click to collapse
Find the nearest Apple store near you.
The only time i had this was when it waa both charging, in a case and playing a big game...
Im currently chatting, listening to a live stream, charging and posting this, no problem with heat at all..
Perhaps its a problem with some specific phones
Sent from my GT-I9100 using XDA Premium App
SgtDutchyNL said:
The only time i had this was when it waa both charging, in a case and playing a big game...
Im currently chatting, listening to a live stream, charging and posting this, no problem with heat at all..
Perhaps its a problem with some specific phones
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Or with some specific games.
cmd512 said:
Find the nearest Apple store near you.
Click to expand...
Click to collapse
LMAO
Sent from my GT-I9100 using XDA Premium App
hpsauce37 said:
I posted on this a few days ago..
My phone got so hot that it shut itself down!
since that i have done a complete reset of the phone and started from scratch again....100% better.
The problem as i see it is with all the 'tinkering' that we users do. All the additional launchers etc and widgets that you add really seem to mess the phone up!
My advice is keep the phone as samsung intended it...or at least change very little. You will see far improved battery life and none of the over heating problems.
Just my opinion but its worked for me.
Click to expand...
Click to collapse
that's just not true.
Mine gets hot aswell .. it's random sometimes but usualy with playing games etc. I suspect it has something to do with the samsung drivers/software and not our tinkering.
Bugs bugs bugs...
Mine also gets fairly hot, which might be a little uncomfortable - but that's the sacrifice you make when you get such a high powered device in such a small space.
Well,amount of apps/tinkering/etc has nothing to do with the phone getting got UNLESS an installed app in messing something up.I have heard many such cases when a rogue app made the CPU run at 100% in different phones.If that's the case you have to find and remove the app.I'd suggest OS monitor for finding it.Never happened to me though!
What's more,it's normal for it to get more hot than your average phone,as it carries more power under the hood and has nothing to help it dissipate the generated heat,as it's plastic.The Desire HD does a very good job with managing heat and I have never exceeded 40 C,even when gaming with an overclock at 1.8GHz and performance governor.Not saying the DHD is better,but Samsung wouldn't have left something like this if it would damage the phone.So I tend to believe that it's designed to get hot.
Mine has overheated twice.
Both times, when trying to pair itself automatically to my car kit. The phone got really really hot (i noticed it warming my leg in my jeans pocket) and needed the battery pulling out to reset it. When it started back up, the running temp was nearly 50 degrees (in standby, it runs at about 27)
Hasn't done it since though, just keeping my eye on it!

Just noticed: 2.3.4 more overheating?

is it just me, or do you notice that 2.3.4 overheats more? it doesn't peak nearly as high as 2.2, but it stays at a pretty high temp for a longer period of time overall. the 2.3.4 is more like consistent in mid-high temps, while 2.2 jumps from low-mid to extremely high temps. has anyone else noticed this?
I wouldnt necessarily call it overheating, but I have noticed the phone gets warmer than 2.2.2 did.
ethantarheels123 said:
is it just me, or do you notice that 2.3.4 overheats more? it doesn't peak nearly as high as 2.2, but it stays at a pretty high temp for a longer period of time overall. the 2.3.4 is more like consistent in mid-high temps, while 2.2 jumps from low-mid to extremely high temps. has anyone else noticed this?
Click to expand...
Click to collapse
I've never had it heat up too much on the Atirx by itself, maybe only like 36 or 37 tops. But plugged into my computer or just a plain AC adapter while on (not charging) it heats up a lot, I'm at 43C right now. What about you? By itself how how does your Atrix get?
on idle im getting around 41c with about 77f ambient temp
You have to remember this is not the official release for US phones, and is beta. There may be many more tweeks before 2.3.4 goes live, and the US version may also be different in many respects.
Threads where this is described as 2.3.4 and not HTKW 2.3.4 or non-US beta 2.3.4 for example only serve to confuse people who do not know what has developed recently, and will show up in searches after the official release, which could also confuse over issues which don't exist with the official release.
For a beta release i think it runs and works flawless I mean ya there is a
thing here or two but nothing that make you incapable of using the 2.3.4
Indeed a little hotter than froyo, idle 37C, it got quite hot while playing some videos.

[Q] Vega temperature

Hi,
I am going to buy a tablet for my son. After search, Vega is the best price with very reasonable spec. Because my son is pre-school, the tablet is for him to read educational books, watch kid video and play games, and I expect him to use it multiple hours each time. One thing I concern is the temperature because the cover is made of plastic instead of metal.
Can you please share the experience what the temperature is (warm, hot, comfortable/uncomfortable) after hours of usage?
Thanks in advance,
Rovi
The only time ive felt it warm up is when ive overclocked the vega to 1.5ghz and even then its not hot its just slightly warm. Also if your getting it for your son i recommend putting a custom rom on the vega as this unlocks its full potential, i recommend Corvus5 on it as it is the fastest and stablelist out of all the roms.
Sent from my vega running honeycom
just warm when charging
i have Vegacomb 1.6, with no overclocking. It never gets warm when i'm using it when not charging, and just one spot when charging (where the charging cable plugs in). It never get hot (like my asus laptop, where i get worried about... male issues when the laptop is on my lap). ((I hope that's discrete enough))
Thanks a lot for the replies.
Have anyone use it for whole day without shutdown? I am wondering how stable is the machine after long hours of usage.
Thanks!
rovix said:
Thanks a lot for the replies.
Have anyone use it for whole day without shutdown? I am wondering how stable is the machine after long hours of usage.
Thanks!
Click to expand...
Click to collapse
Works pretty fine, only thing when you put it in suspend mode and wake it up later give it 1-2 seconds to refresh battery and time status
I have vegacomb 1.7 my tablet verry little warm but no prob... I use 5~6 hours continuosly..

Atrix tends to run hot quickly

I'm running CM 7.2.0 with faux's 1GHz 0.2.4 kernel underclocked to 912 MHz (though I've had this with all CM roms and kernels) and after more than a minute of screen time my Atrix's CPU tends to exceed 50 degrees Celsius while the battery gets to around 40 degrees Celsius (this is recorded using setCPU). This happens most with apps like BaconReader or Facebook but has happened with others too.
I refuse to play games on my phone because it seems to nearly overheat while I'm playing any game.
When the phone starts to get hot, the battery drains faster (like 1% every 2-3 minutes).
Is there something I can do to fix this, or is this a common problem that I shouldn't mind?
Has anyone else experienced similar temperature issues?
Indeed my friend, its the Tegra 2 chipset, in fact, most of nVidia hardware tend to overheat, including Tegra 3 and PC/Laptops Video Hardware.
djluis48 said:
Indeed my friend, its the Tegra 2 chipset, in fact, most of nVidia hardware tend to overheat, including Tegra 3 and PC/Laptops Video Hardware.
Click to expand...
Click to collapse
Never had an overheating problem without a rogue app on my Atrix. Get BetterBatteryStats and CpuSpy and see what's keeping your phone awake/running.
Crap phone, nothing you can do about it.
Atrix_Owner said:
Crap phone, nothing you can do about it.
Click to expand...
Click to collapse
Someone is very dissapointed with its phone. :cyclops:
Atrix_Owner said:
Crap phone, nothing you can do about it.
Click to expand...
Click to collapse
Get a life.
Nothing wrong with our phones except moto's traditional neglect.
OP, try going back to stock. I find I've got heat issues with custom kernels too..
Sent from my MB860 using Tapatalk 2
Probably you have some rogue apps running in the background. You could try the GSAM battery monitor. It shows which app using the most battery and waking your phone.
It is getting hot because it is under a load. Not the phones fault. It is something you added. I had a "bad" app that looped and kept trying to write to cache. I couldn't figure it out till I used logcat. This phone still kicks ass, even if it does have Tegra II.
Also, BetterBatteryStats is free to xda users.
http://forum.xda-developers.com/showthread.php?t=1179809
I would look into an kernal change if nothing else works. This has helped in the past for me
MXIIA said:
I'm running CM 7.2.0 with faux's 1GHz 0.2.4 kernel underclocked to 912 MHz (though I've had this with all CM roms and kernels) and after more than a minute of screen time my Atrix's CPU tends to exceed 50 degrees Celsius while the battery gets to around 40 degrees Celsius (this is recorded using setCPU). This happens most with apps like BaconReader or Facebook but has happened with others too.
I refuse to play games on my phone because it seems to nearly overheat while I'm playing any game.
When the phone starts to get hot, the battery drains faster (like 1% every 2-3 minutes).
Is there something I can do to fix this, or is this a common problem that I shouldn't mind?
Has anyone else experienced similar temperature issues?
Click to expand...
Click to collapse
i know exactly what you're talking about, i jumped around all them roms based off of CM7 and CM9, tried different kernels, I did like Clemsyn's 1.0GHz enhanced kernel. In the end, try the rom in my sig, its based off CM7.2 stable, i **** you not my friend, first time ever I have enjoyed more than 24 hours of phone use on a single battery charge, phone never gets anywhere remotely close to being as hot as it used to, something about this build, i dont know but my battery lasts now and phone doesn't cook in my pocket after a phone call, check out log i have of how much battery life I got from 1 full charge
try flashing Jug's battery fix through CWM, it slows down the drain of the battery to a noticeable level where you can see it really does work and helps keep the battery from being pissed away after 2 phone calls
This is happening to me as well and only with this Rom have I had this issue. I guess I'll try changing roms and see if that fixes things.
i am using epsilon project v5 and problem solved
remember to fix permission
Sent from my MB860 using xda premium

Extremely Disappointed with K1

I jumped in and bought a K1 to replace my dying GPad GPE. After 3 days, this seems like a huge mistake.
The K1 is very laggy in basic apps like Play Store and Chrome, does not register touches very well and has terrible battery life. I even charged it overnight and didn't get a full charge. On top of that, I am constantly getting the screen overlay message any time I need to enable a permission.
What could be causing this? This tablet is so highly regarded I don't get it.
Sent from my SHIELD Tablet K1 using Tapatalk
For charging you need a 2 or 2,5 A charger. Then it will charge (if it's not faulty) in around 2 hours. The screen overlay message is coming from the quick launcher (or how it is called). So disable it or give it the right to draw over other apps.
I don't have problems with lags or touches. Are you on the latest updates?
PearlMikeJam said:
I jumped in and bought a K1 to replace my dying GPad GPE. After 3 days, this seems like a huge mistake.
The K1 is very laggy in basic apps like Play Store and Chrome, does not register touches very well and has terrible battery life. I even charged it overnight and didn't get a full charge. On top of that, I am constantly getting the screen overlay message any time I need to enable a permission.
What could be causing this? This tablet is so highly regarded I don't get it.
Sent from my SHIELD Tablet K1 using Tapatalk
Click to expand...
Click to collapse
Its got a crappy Nvidia CPU in it, thats the issue. Like my N9, that too is crap, again, Nvidia inside.
edisso10018 said:
For charging you need a 2 or 2,5 A charger. Then it will charge (if it's not faulty) in around 2 hours. The screen overlay message is coming from the quick launcher (or how it is called). So disable it or give it the right to draw over other apps.
I don't have problems with lags or touches. Are you on the latest updates?
Click to expand...
Click to collapse
I am using the correct rated charger. This even happened when charging with the tablet off.
I am on the latest update. I waited to install my apps until after all updates were applied. The touch issues may be lag related. The back button almost always requires multiple touches. Keyboards often time register multiple touches or just freezes.
I am also noticing network issues. Apps report loss of connection when the wifi shows connected.
I hate to say it, but I am leaning towards returning this for a Samsung.
Sent from my SHIELD Tablet K1 using Tapatalk
PearlMikeJam said:
I jumped in and bought a K1 to replace my dying GPad GPE. After 3 days, this seems like a huge mistake.
The K1 is very laggy in basic apps like Play Store and Chrome, does not register touches very well and has terrible battery life. I even charged it overnight and didn't get a full charge. On top of that, I am constantly getting the screen overlay message any time I need to enable a permission.
What could be causing this? This tablet is so highly regarded I don't get it.
Sent from my SHIELD Tablet K1 using Tapatalk
Click to expand...
Click to collapse
Also a recent owner of the k1. Running stock firmware (1.5) but with BitO-K kernel. The only thing I am experiencing is mediocre battery life, charges from 50-100% in under an hour using a 2.5A charger. The only thing that sucks, and this goes for android tablets in general, is the removal from 4.4 of the TabletUI. Seeing we're already at 7.1 and TabletUI is still dead, it looks like we'll have to fight to get it back again.
PearlMikeJam said:
I am using the correct rated charger. This even happened when charging with the tablet off.
I am on the latest update. I waited to install my apps until after all updates were applied. The touch issues may be lag related. The back button almost always requires multiple touches. Keyboards often time register multiple touches or just freezes.
I am also noticing network issues. Apps report loss of connection when the wifi shows connected.
I hate to say it, but I am leaning towards returning this for a Samsung.
Click to expand...
Click to collapse
That lag is not normal. And my tablet charges from around 10% to full in about 2 hours. Maybe you should try a factory reset. If that doesn't help I would return it.
I won't buy a Samsung tablet. I would try a replacement. I own the k1 for a year now and I'm still very satisfied with. And Nvidia updates it. Which Samsung usually doesn't.
Don't listen to Nvidia trolls... ⬆
Your experience does not sound typical. Perhaps it's a hardware issue, but I agree with @edisso10018 that the first step would be a factory reset.
Wish you luck!
The Nvidia CPU is pretty good shame it's not the X1, It performs better then some of my phones with QC chips, Do a factory reset and see if the lag is still there, Battery life is poor can agree on that
My k1 is over a year old it is still playing games with no trouble yes a agree with the battery life but mine charges with no problems a have noticed a little slow down but am not running bit os updated kernel yet but a still rate 10/10 best tablet a ever owned.
Tablet is laggy, no denying it.
Sent from my Pixel XL using Tapatalk
ctap001 said:
Also a recent owner of the k1. Running stock firmware (1.5) but with BitO-K kernel. The only thing I am experiencing is mediocre battery life, charges from 50-100% in under an hour using a 2.5A charger. The only thing that sucks, and this goes for android tablets in general, is the removal from 4.4 of the TabletUI. Seeing we're already at 7.1 and TabletUI is still dead, it looks like we'll have to fight to get it back again.
Click to expand...
Click to collapse
K1 here-- I don't run stock (DU 6.0.1), but I used BitOK for a while and realized its not very good. Switched back to stock kernel (from my ROM) and its more stable. You don't lose out on much anyway-- BitOK doesn't have features I want like voltage control. Examples of instability caued by BitOK: GPU was stuck at ~350mhz, would not ramp down fully to 72mhz. Also stock is smoother. You can still use adiutor to monitor and control a few things.
One more thing: be very careful when flashing blobs and other stuff in fastboot that it is for the K1 version and not OG shield! A lot of devs posting these things arent explicit as to which version. DTBs and Blobs are specific to the shield type-- one might work for the wrong tablet version, or it might brick it, or it might be unstable.
As for the Batery life I can tell you it does suck even on the best case scenario. There is no way around this as it is small and the large screen, as nice as it is, sucks a lot of juice. Lowering brightness helps somewhat but still I'll be lucky to get a couple hours of SOT out of it.
For the price its a great tablet, with a few small compromises, such as bat life, but thats the price you pay for great screen and sound at a cheap price. We are lucky to have at least a few devs still doing work with this device, and luckier still that nvidia is STILL supporting it with updates, even if slowly. They recently announced 7.1.1 will be forthcoming.
Mine was laggy too, I flashed stock firmware with my PC and now it's working perfectly.
Bought mine as a refurb and it works fine. I think you either have bad hardware, or a bad install. Try flashing stock and see if it improves.
Tbh my only complaint is with battery life, I switched to BitO to see if it got any better, the tablet is smoother with this kernel than stock but the battery is the same, I wish we had UV'ing, my favorite setting on any kernel, back on my N10 my battery could easily be improved 10-15% and the heat was reduced drastically, good binned ones could shave up to 200mV on some steps. K wish this was implemented
PearlMikeJam said:
I jumped in and bought a K1 to replace my dying GPad GPE. After 3 days, this seems like a huge mistake.
The K1 is very laggy in basic apps like Play Store and Chrome, does not register touches very well and has terrible battery life. I even charged it overnight and didn't get a full charge. On top of that, I am constantly getting the screen overlay message any time I need to enable a permission.
What could be causing this? This tablet is so highly regarded I don't get it.
Sent from my SHIELD Tablet K1 using Tapatalk
Click to expand...
Click to collapse
I just bought a K1 (discount price 169€) and I don't have this problem at all. Even if I use only 1 core (settings performance) for basic app it's smooth smooth smooth.
And the battery life is huge !!
For gaming tho I switch back ofc the performance setting.
:good:
I bought a K1 three weeks ago to use as a display for my phantom 4 quadcopter. I am very impressed with its performance. I'm not experiencing any lag other than at startup. Once it's up and startup is finalized I dont have any problems. The battery life isn't great, I'll agree there but hopefully it gets better with Nougat.
Sent from my SM-G925P using XDA-Developers Legacy app
I bought a K1 last week to replace my aging Nexus 7, did a factory reset and still wasn't satisfied with it being laggy. Did my share of Google searching and finally stumbled upon a quick fix to try : disable Daydream. Since changing this one setting it has been very smooth since, no issue for lag or touch registrations.
Give it a try, might not help your charging but I did notice a much reduced battery drain while sleeping also.
My only other changes were to root, change the DPI to 240 and use the Google Now Launcher which compliments the display nicely.
I wasn't happy with it as well until I flashed cyanogenmod 13 and a custom kernel with overclock. Now it's a beast, battery is great, signal as well. And I also now have the option to OC the processor to 2.5 GHz before I play some more demanding games and then set it back to 2.2 or even lower if I won't need all the juice. Seriously, the stock marshmallow ROM sucks, I have only heard bad stuff about it. Also, the nougat update is about to come out so I'd give android N a chance, too.
About the battery life -- see which apps are using the most juice under settings/battery/. Some of them may be using more CPU cores, and have a higher frame rate than is needed. Go to settings/App optimisation/ and crank the numbers down. Next go to settings/Accounts and see the long list of things that want to autosync with you. Turn the autosync off for those you aren't using. Turning off wifi except when I am using it has made a significant difference for me as well.
grävling said:
About the battery life -- see which apps are using the most juice under settings/battery/. Some of them may be using more CPU cores, and have a higher frame rate than is needed. Go to settings/App optimisation/ and crank the numbers down. Next go to settings/Accounts and see the long list of things that want to autosync with you. Turn the autosync off for those you aren't using. Turning off wifi except when I am using it has made a significant difference for me as well.
Click to expand...
Click to collapse
Putting the CPU at 80 or 90% CPU speed in the performance settings will get you that reduced power consumption. You might not even notice the speed difference. These speed tiers also run at lower voltage.
Using the GPU frame rate limiter will dramatically extend gaming time too. I find 30 fps acceptable most of the time.
Of course it would be nice to run the thing unrestricted, but it's just not practical when you also want battery life. Look at what Nintendo is doing with the clock speeds of the X1 in the Switch.

Categories

Resources