Hi guys,
i have read so many threads on the emmc chip issue after buying a ny touch 4g from ebay. mine is no different in the problems but i cant seem to get the phone to flash.
i have downloaded the recommended PD15IMG.zip files on the sdcard but my problem is in trying to update using the file the phone sticks on updating the Bootloader.
so i was wondering is there a way to egit the zip file by removing the bootloader image so that when updating the process can just bypass the bootloader stage inorder to get the phone going again?
currently the phone sticks on the my touch 4g logo and yes i can get into hboot but no i cannot do a factory reset cause its sticks and no i cannot get into recovery cause it vibrates 7 times.
also i wanted to know if its possible to use either fastboot.exe or adb.exe to flash the image onto the phone? because in the past you could have used a RUU.exe file to flash a phone in bootloader mode is that still possible with this phone?
can someone assist me with getting the phone to work don't care about rooting right now oh also this is the info on screen:
GLACIER PVT SHIP S-ON
HBOOT-0.89.0005
MICROP-0429
RADIO-26.11.04.03_M
eMMC-boot
April 14 2011, 13:18:22
read
Read this thread first.http://forum.xda-developers.com/showthread.php?t=1538859It is same to you problem(Bootloop,S-On).After reading fully,follow their instructions given below.If you still have the warranty,simply exchange this.
Related
I was looking for sense roms for my mytouch 3g 1.2 and found one that required the radio to be updated to 6.35 ( i double and triple checked to make sure the steps and procedures were specifically for the mytouch with the 32a board ) but after I followed the directions, my phone became unresponsive. It stayed at the HTC Magic screen for about an hour before I turned my phone off and back on again to undo what I had done ( using previous experience from a screw-up I did several months back...basically using the goldcard method to re-root my phone as if it were "new" again ). My problem is, now it's more unresponsive than it was before. it pauses at system - unzipping every time i try to use hboot to load the sappimg.zip. right now my current stats are:
SAPPHIRE UNKNOWN 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP31000)
CPLD-13
RADIO-3.22.20.17
May 8 2009,21:02:32
and loads up a red vodafone bootscreen. i honestly think my problem was accidentally pressing the wrong link on Amon_RA's thread about perfected SPL, and i didn't realize it until it was too late... I cannot flash anything thru fastboot, hboot basically stops at system - unzipping when trying to run the sappimg.zip, and "fastboot boot recovery.img" loads the red vodafone screen, but doesn't flash boot the recovery so i can try and fix it with recovery...
all i need to know is if it's entirely bricked, or if i can still save it, and if so, a little nudge in the right direction would be much appreciated...i have been searching google, xda-developers, cyanogenmod, androidforums, etc. for the past 3 days and cannot, for the life of me, find out how to fix the issue...
EDIT: as always, when i ask for help, i end up fixing it somehow...
Ok first off I am new to all of this. This Is my first android smartphone It's a T-Mobile MyTouch 3g. I just bought It off eBay and If I can't fix It then I am out some money PLEASE HELP!!
Have done some reading but can't seem to fix what's going on with this phone . I got It off eBay and the seller said It had problems with the touch screen every so often but other wise worked great In every other way but that Is so so far from the truth.
When you first turn It on It will boot up to the sim pin screen. I have gotten the touch screen to respond long enough to enter my pin once. It will freeze and reboot over and over. The track ball will work once In a while along with the home and back buttons.
I know It's running Superfly TCBY Froyo ROM and I think thats were all the problems are because It does work right every so often so I have been trying to unroot It and put It back to factory rom and settings and start fresh with the hopes that It will fix the problems but the problem now Is when I go into recovery to flash It or make any kinds of changes, It will freeze and reset. I can't even get the recovery menu to work long enough to do anything. Can someone please explain how I can get this phone back to original.
PLEASE HELP
We need your fastboot information. Turn the phone on holding back+power and post the info you see here.
Fast boot info
sapphire pvt 32a ship s-on g
hboot-1.33.0013 (sapp31000)
cpld-13
radio-2.22.23.02
oct 21 2009,22:33:27
fastboot
Search the forums for "unroot mytouch 1.2" and that'll get you straightened out.
Sent from my LG-P500 using Tapatalk
OK well I did a search and have been doing alot of reading and I managed to get It to load a Generic MyTouch Rom w/Root because when I try to unroot to SAPPIMG Sapphire T-Mobile US 2.10.531.4 release i keep getting main version older update failed so I read to go to a Generic MyTouch Rom w/Root and try again from here
"theunlockr.com/2010/04/26/how-to-load-a-custom-rom-on-the-htc-mytouch-3g"
Still same problem main version older update failed. I can't create a Goldcard to try the Goldcard method because I don't have access to the phone to enable USB debugging. I can't do much with the phone because of the freezing.
I can get Into fastboot and hboot but It still freezes. So I know It's not bricked but touch Is still not working. can load the phone up but pretty much becomes a good paper weigh after a few minutes on. The buttons will not responded, no touch, no access to to anything Inside the phone.
What can I do? Is this phone worthless? Can It be fixed? I feel like I just bought a expensive paper weigh.
As I said before I am hoping that If I can get It back to original settings and rom that It will stop freezing, stop rebooting and the touch, buttons, and system will work right.. What do you think Is causing all of these problems?? No touch, Freezing, rebooting?? How can I get It back to being unrooted and running the original software/rom PLEASE HELP.....
If you have access to recovery you can flash an engineering SPL and the just flash the stock sappimg again and it'll work. I can link ya in a minute.
Sent from my LG-P500 using Tapatalk
I just flashed Engineering SPL 1.33.2005 after doing some research. waiting for It to format cache after flash and reboot. hope this works?
Fast boot info now
sapphire unknown 32a eng s-off h
hboot-1.33.2005 (sapp31000)
cpld-13
radio-2.22.23.02
apr 20 2009,15:30:43
Tried to flash original sappimg got this
Parsing...[SD ZIP]
[1] BOOTLOADER - OK
[2] RADIO V2 - OK
[3] SPLASH1 - OK
[4] RECOVERY - OK
[5] BOOT - OK
[6] SYSTEM - Fail-PU
[7] USERDATA - Fail-PU
Partition update fail!
Update Fail!
now It has went back to
Fast boot info
sapphire pvt 32a ship s-on g
hboot-1.33.0013 (sapp31000)
cpld-13
radio-2.22.23.02
oct 21 2009,22:33:27
when i flash the recovery and boot it just goes to the green mytouch splash screen and does nothing.. if i try to boot into recovery manually with power and home it goes to the black screen with the exclamation triangle and a phone...
I can still get Into HBOOT and FASTBOOT but I can not get Into the recovery menu and the phone will not load pass the MyTouch 3g screen.
How can I flash a new recovery img via hboot?
[What I "know"]
My understanding is that I have a Shipment SPL aka "Perfect SPL" with Security on which means I cannot use fastboot.
I also get a "Main version is older. Update failed" when I try to down grade and unroot.
[My Goal]
I want to change my SPL to a engineering one, unroot and get back to stock.
Your going to need to make a goldcard, which means you will need a phone that runs Android. Any phone running Android will work. You can use the guide from here to make it. You'll only need the other phone for Part III steps 1-5 from that guide. Once you get the goldcard made, put this file on it, boot into hboot and flash like you did the other sappimg. That will get you the engineering SPL. Then from fastboot, run this command:
Code:
fastboot erase system
Then, put this SAPPIMG on your regular SD card (or you can replace the other sappimg on your goldcard) and flash it from hboot. Hopefully something in the system partition is corrupted and the wipe will fix it so that the sappimg can write the new system properly.
First off THANK YOU DonJuan692006 for all of your help.. I would love to make a gold card because I think that would solve all of my problems but I don't have access to another phone that runs Android that's why I have not tried that yet. I have no way to make a gold card. I have extra SD Cards but no other phone that runs Android to complete It and my phone will not allow me to do any of that at this point. What else can I do?? Is there any other way to make a gold card?
I will have access to another phone that runs Android In a few days but until then I am stuck.
I have now made a gold card, got the engineering spl Installed and then tried to Install the other file and It gets stuck on system unzipping while updating and then reboots. what can I do now???
Were you able to do the fastboot erase system before trying the second sappimg?
Sent from my LG-P500 using Tapatalk
No I was not able to do that. I have done alot of reading over the last few weeks and I still don't understand how to enter commands In fastboot. So thats why it didn't work?
That was kind of the point in flashing the engineering SPL. All you do is download the AndroidSDK kit. Extract it to somewhere you can find it. Inside of that folder will be a folder called Tools with the fastboot.exe. So you just open a command prompt from there and do the command in my other post.
So, if you were to extract AndroidSDK to the root of your C: drive (as I did), you would simply open a command prompt window by typing "cmd" in either the run box on Windows XP or the "Search" box in Windows Vista and 7, and then type
Code:
cd C:\AndroidSDK\Tools\
Alternatively, if your using Windows Vista or Windows 7, you can navigate in Windows Explorer to the Tools folder and launch a command prompt directly from that folder by holding Shift and right-clicking. There will be an extra option in the menu "Open command window here". Make sure that you don't right click on a file, right-click somewhere in the a blank are in the folder.
Sent from my LG-P500 using Tapatalk
Ok, I understand. I have AndroidSDK Installed. Needed It to make the goldcard. I understand how to do It know. Thanks again for all your help. I will try again the right way and get back.
Hi all, I bought a 2nd hand HTC Magic with Mytouch 3g rom. It's the old model (without 3.5mm headphone jack) and its made in Taiwan.
Been using well for 3 months until what happened I tried doing system update from 1.5 to 1.6. Success!! Then I tried doing 1.6 to 2.1 update.
Halfway while updating it, the phone blacked out ( guess I didnt have more than at least 50 % battery power)
And from that point onwards, whenever and everytime I switched on my handphone it boots up and stucked at the Mytouch 3G green screen.
I cant get access into my handphone like how I normally do. All I can ever go far is just the stucked Mytouch 3g screen.
I've read alot from lots and other Android users and tried to do it myself.
1) Tried unrooting it by downloading the sappimg.nbh file, copy into a newly bought 2GB micro SD, pressing (VOL DOWN+POWER) and let the phone do its job.
Manage to get to the parsing, updating and checking signature part but it just say 'Model ID incorrect! Update Fail!'
2) Next I read is about doing GOLDCARD METHOD. I did as instructions and follow it step-by-step and carefully.
3) I can and able to download all needed files like 1.33.2005 HBoot, Amon Ra's Recovery Image, SappiMG.zip and all others.
BUT the only problem is that I cant get it in sync with the comp.
4) I cant get access at all into my phone to go to Settings > Applcations > Make sure Unknown Sources is checked on as required to.
5) I cant get access into my phone at all to go to Market and download the required File Manager App.
6) I tried installing all kinds of files for update.zip by pressing (HOME+POWER) still to no avail.
Tried all kinds of HBOOT, FASTBOOT still cannot.
7) The only thing I'm able to do is just (VOL DOWN+POWER) , (BACK+POWER) , (HOME+POWER) , (TRACKBALL+POWER) which emits the blue LED light, i don't know the reason. But still, nothing can be done.
And by pressing (BACK+POWER) this is what my phone's motherboard or whatever they call it.
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP10000)
CPLD-12
RADIO-2.22.28.25
Oct 21 2009,22:33:27
So what should I do now? Is this what they called it a bricked phone? I tried everything and really at lost. Is there someone out there who's able to help me with this? Been like this the past 4months. And Im really a noob with Android Gadgets as Im new to it. Do pardon my ignorance.
Thanks! really need your help. I'll do my best as long there's other alternative methods unless like I've stated the methods that I'm unable to do.
I have spent five hours going thru the threads and turn up with answers requiring root as for phone was never root.
Phone: myTouch 4G
Carrier: T-Mobile
Warranty: Out of Warranty
Long Story not so Short...
Froyo, Friend OTA updates it to GB, (i'm sure he never created a backup)
OTA updates installs, then hangs and phone stops working.
Friend had friend# 2 in japan remote control Friend# 1 and download GB to manually update through HBOOT with PD15IMG (I have no idea exactly which rom is it)
Friend#2 did something, but friend#1 went away so didn't watch everything. (yes wtf)
now phone just loops into Hboot, takes a bit of time before vol controls work.
Cannot i guess autoload a signed tmobile froyo rom as it end up saying "MAIN version is older!" (probably fail here as phone is not rooted)
Recovery Didn't work, ends up being Red Triangle
Factory Reset did not work
I know for sure this phone is not ROOTed.
what it says on screen
GLACIER PVT SHIP S-ON
HBOOT-0.89.0005
MICROP-0429
RADIO-26.11.04.03_M
eMMC-boot
Apr 14 2011,13:18:22
Phone is Detectable on fastboot.
is there a way to use fastboot?
is there another way to access or turn on "USB DEBUGGING" without mentioning going in to settings etc.etc.etc... because phone will not load/start where i can access it.
any input/wisdom/opinion/criticisms/face-palming comments is helpful..
MasterYoshi1 said:
I have spent five hours going thru the threads and turn up with answers requiring root as for phone was never root.
Phone: myTouch 4G
Carrier: T-Mobile
Warranty: Out of Warranty
Long Story not so Short...
Froyo, Friend OTA updates it to GB, (i'm sure he never created a backup)
OTA updates installs, then hangs and phone stops working.
Friend had friend# 2 in japan remote control Friend# 1 and download GB to manually update through HBOOT with PD15IMG (I have no idea exactly which rom is it)
Friend#2 did something, but friend#1 went away so didn't watch everything. (yes wtf)
now phone just loops into Hboot, takes a bit of time before vol controls work.
Cannot i guess autoload a signed tmobile froyo rom as it end up saying "MAIN version is older!" (probably fail here as phone is not rooted)
Recovery Didn't work, ends up being Red Triangle
Factory Reset did not work
I know for sure this phone is not ROOTed.
what it says on screen
GLACIER PVT SHIP S-ON
HBOOT-0.89.0005
MICROP-0429
RADIO-26.11.04.03_M
eMMC-boot
Apr 14 2011,13:18:22
Phone is Detectable on fastboot.
is there a way to use fastboot?
any input/wisdom/opinion/criticisms/face-palming comments is helpful..
Click to expand...
Click to collapse
I'm not sure, but if it stucked after GB update & if you can get into bootloader,you can try downgrading to froyo,no.Then you can do what you want.But wait untill a dev reply to your post.
P.S.
I forgot.To work with adb you need to on usb debugging,no.You cannot on it now,no.Sorry bro.Wait until dev reply.I never got a problem when updating to GB(now I downgrade & root).
Is my phone fried? When I turn it on it's stuck at the MT4G splash screen. I boot into the bootloader with PD15IMG.zip in the root and attempt to update, but it just stops at updating the bootloader. It just stays on the updating screen saying it's updating the bootloader. Tried both stock gingerbread zip files with the same problem.
When I select Recovery, it shows the MT4G screen, then the green arrows and picture of the phone, then it shuts the screen off and vibrates 7 times. I have to remove the battery to reboot.
If I select Factory Reset, the phone just freezes in the bootloader.
Here's my bootloader copy:
GLACIER PVT SHIP S-ON
HBOOT-0.89.0005
MICROP-0429
RADIO-26.11.04.03_M
eMMC-boot
Apr 14 2011,13:18:22
I'm posting this because I didn't see anyone with the exact same issue and I didn't want to give up on it just yet. Any ideas or suggestions?
7 vibrations mean HW failure. Your phone is screwed.
HTC Panache Videotron
jpk1295 said:
Is my phone fried? When I turn it on it's stuck at the MT4G splash screen. I boot into the bootloader with PD15IMG.zip in the root and attempt to update, but it just stops at updating the bootloader. It just stays on the updating screen saying it's updating the bootloader. Tried both stock gingerbread zip files with the same problem.
When I select Recovery, it shows the MT4G screen, then the green arrows and picture of the phone, then it shuts the screen off and vibrates 7 times. I have to remove the battery to reboot.
If I select Factory Reset, the phone just freezes in the bootloader.
Here's my bootloader copy:
GLACIER PVT SHIP S-ON
HBOOT-0.89.0005
MICROP-0429
RADIO-26.11.04.03_M
eMMC-boot
Apr 14 2011,13:18:22
I'm posting this because I didn't see anyone with the exact same issue and I didn't want to give up on it just yet. Any ideas or suggestions?
Click to expand...
Click to collapse
it get the same thing, with the same device... but no vibration....
I have received an MT4G with the same issue, actually this is the second one I receive with the same issue. (FYI: I work at a cellular phone repair store). I have searched far and wide... but now one with a concrete answer as to what to do with this situation. Any help would be appreciated. Thank You