nexus s i9023 no signal - Nexus S General

HI guys, I have a big problem with my nexus s i9023, i not have signal,
i'm trying to flash cyanogen 9, cyanogen 7, stock 4.0.4, AOKP build 28, KI1 radio, KB3 radio and KF1 radio, but i haven't found a solution yet....
can you halp me
sorry for my bad english

any one can halpme???
sorry for my bad english

tobyax said:
any one can halpme???
sorry for my bad english
Click to expand...
Click to collapse
Have u tried stock rom?
If the problem still exist maybe it's hardware problem

tobyax said:
HI guys, I have a big problem with my nexus s i9023, i not have signal,
i'm trying to flash cyanogen 9, cyanogen 7, stock 4.0.4, AOKP build 28, KI1 radio, KB3 radio and KF1 radio, but i haven't found a solution yet....
Click to expand...
Click to collapse
First, just try a re-boot, at least. (Sorry if you've tried that already!)
Running a slightly earlier CM9 version, still on 4.0.3 (just went up to 4.0.4 the other day), I sometimes had slight problems going from places with no signal (eg. under-ground transport) back to places that should have signal, but not showing up. I had the phone on deep-idle at that time - great for battery, but a bit experimental glitchy elsewhere...
PS: are you on CM7 or CM9 - you mention both, but must be CM9, right?

now i am on stock 4.0.3 and not have signal... i try other sim card and i have the same problem....
sorry for my bad english

Can you check in Settings/About Phone/Status if your IMEI number is correct?
If you have only zeros, this might be a problem.

the imei is correct it's the same of the one in the behind

hardware problem?

Related

Nexus s Alpha 20 ics build no 3g

Hey guys, sorry in advance if this has been asked already.
I wiped everything on my nexus s and installed the cm9 alpha 20 build. Everything is working perfectly except for one thing. I get no 3g, even tho I can make calls.
I think it might be the radio but I don't really wana mess around with that unless I know for sure. Any ideas?
Thanks.
wrong section but, what radio are you currently using? Update your radio to the latest one.
Sry, I'm not on here very often anymore. The baseband version is I9020AUCKB2. Is that what you wanted?
I had the same issue. What fixed it for me is entering correct APN info which for some reason was missing after the install.

[Q] 2.3.6?...Am I totally ****ed?

Right.
So, these days I had problems with my phone and have been forced to flash a new .sbf on my Defy+.
Now, my main question is: What are the main issues with 2.3.6? As far as I read there weren't issues with some .sbfs. (and there weren't any reported with my .sbf.)
Had read about issues like random reboots and inconsistent Wi-Fi connectivity on 2.3.6. Though i had issues of random reboots only, Wi-Fi was fine on my defy+, when i was on 2.3.6 firmware version ending with 1321.
andr0idfreak said:
Had read about issues like random reboots and inconsistent Wi-Fi connectivity on 2.3.6. Though i had issues of random reboots only, Wi-Fi was fine on my defy+, when i was on 2.3.6 firmware version ending with 1321.
Click to expand...
Click to collapse
what can i do if i have these probelms?is there any way of solving this??
The best you can do, if you want to stick to stock ROM, is to upgrade to the latest version available i.e. 231x. Keep in mind that it has BL7 and it's a bit difficult to root.
The other option is to switch to CM7. I would recommend CM7 builds by FuZZ_. I never had any problems after switching to Cyanogenmod.

Can't hear audio in calls on 4.2.2

Hello all. I'm trying to solve this problem for more then 3 hours and I'm really starting to have a headache from all of it.
When I call someone or someone calls me I can't hear the person on the other side, but they can hear me with no problem. How to fix this?
I already did a Factory Reset and that didn't help, I tried connecting and disconnecting my headphones and the problem was still there. I don't care about LTE compatibility.
Phone specs are:
Android version: 4.2.2
Baseband version: .48
Bootloader:MAKOZ10o
Build number: JDQ39
I didn't update anything on my phone, it came with that software installed. I just rooted it and nothing else.
EDIT: I think this is important too so I will add it. At one time the earpiece speaker did work, the in stopped so I did a Factory Reset and it didn't help. When I plugged in and out my headphones, it was fixed. Later, it got broken again, but now I can't fix it with plugging my headphones in and out.
EDIT 2: So I read on the Internet that I can downgrade to a older Android version and that then the problem will be fixed. My question is, to what version and what functionality will I lose?
EDIT 3: Updating to radio .54 fixed the issue. Thank you for helping.
This may sound stupid but...... did you check the volumes?
zephiK said:
This may sound stupid but...... did you check the volumes?
Click to expand...
Click to collapse
Yes, it's all the way up.
Well your baseband is fine assuming you didn't try any LTE hacks (which you're on .33+ so you probably didn't). Stock rom, stock kernel?
What else did you do?
zephiK said:
Well your baseband is fine assuming you didn't try any LTE hacks (which you're on .33+ so you probably didn't). Stock rom, stock kernel?
What else did you do?
Click to expand...
Click to collapse
I only rooted my phone and installed a couple apps and games. I didn't fiddle with the settings too much as I didn't want to break my phone.
Help me ,please
Hello,I have the same problem ,i'm from argentina
And i bought in USA, from google play without contract.
Please can you tell me, where can i to obtain the baseband version .54 for update my baseband?
My phone is android version: 4.2.2
Baseband version: .48
Bootloader:MAKOZ10o
Build number: JDQ39
Any thread ? Thanks

How to Dowgrade razr M from 4.1.2 to 4.1.1

As a last resort i have decided to downgrade my razxr m to earlier ics version
my current status is :
android
4.1.2
baseband :
SM_BP_1-1031.027.32.81P
build
9.8.1Q-66
build date
fri mar 22
can anyone help me how to do it as i want my phone to be used in India on gsm networks , which its is not working on right now
regards
is there no way to downgrade it ???
lord dredd said:
is there no way to downgrade it ???
Click to expand...
Click to collapse
have you tried flashing a 4.1.1 ROM? i think someone posted a TWRP-flashable file for Energy (which is 4.1.1).
BTW, 4.1.1 is JB, not ICS.
jco23 said:
have you tried flashing a 4.1.1 ROM? i think someone posted a TWRP-flashable file for Energy (which is 4.1.1).
BTW, 4.1.1 is JB, not ICS.
Click to expand...
Click to collapse
Thanks for the reply mate
As there was no help up until your reply on this matter , i tried to take it upon me to find a way , so i in the end was able to infact flash the ICS stock via rsd lite
but no success even that was fruitless as GSM radio was still locked in that too
so now after about a full month or so i can say i have tried each and every option and this phone is locked as far as gsm is concerned ,
ALL THE NEWER VERSIONS OF DROID RAZR M XT907 ARE FACTORY LOCKED NOW , they cant be used with gsm ooperators outside of th US , and may be inside too.
lord dredd said:
Thanks for the reply mate
As there was no help up until your reply on this matter , i tried to take it upon me to find a way , so i in the end was able to infact flash the ICS stock via rsd lite
but no success even that was fruitless as GSM radio was still locked in that too
so now after about a full month or so i can say i have tried each and every option and this phone is locked as far as gsm is concerned ,
ALL THE NEWER VERSIONS OF DROID RAZR M XT907 ARE FACTORY LOCKED NOW , they cant be used with gsm ooperators outside of th US , and may be inside too.
Click to expand...
Click to collapse
I've seen on some 4.2.2 ROM threads that there is a GSM fix. have you tried that yet?
jco23 said:
I've seen on some 4.2.2 ROM threads that there is a GSM fix. have you tried that yet?
Click to expand...
Click to collapse
haven't tried though , but the gsm fix in them is actually for those roms where switching to gsm options isnt there by default , it just adds a gsm option in the network settings
i alreday have that in mine stock , the issue it this damn thing just doesnt latch onto any GSM network

Galaxy S5 Plus (SM-G901F) losing mobile signal and gps after Marshmallow update

After updating to Android 6.0.1, the phone is randomly losing mobile and gps signal. It happens about 30-40 times a day, especially when moving around, like driving . Almost every time I look at my phone, I see "No service, network not found" or "gps lost" messages. After about 10 seconds, the signal comes back and everything is ok again. Very annoying and impossible to use navigation apps, like Waze and Google Maps. I have made a soft reset, a hard reset, wiped all data and cleared the phone cache, checked and cleaned the Sim card. Nothing helps. Before update the phone worked brilliantly. Also noticed, that the signal won't drop when using wifi, the problem occurs only when data connection is on. And I'm not the only one, I have 2 friends with the same phone and the same problem. Looks like a software issue. Can somebody help?
PS. I'm from Estonia, and the software version is G901FXXU1CPE1/G901FBAL1CPE1
Thank you in advance...
Hi mate,
I Have the same device although mine uses a custom ROM but the problem I experienced was exactly like yours
Samsung released a new issue of the 6.0.1 for our phone, PDA G901FXXU1CPF6 CSC G901FPHN1CPF2 you can login to the sammobile site and download it
As I said above I have a custom ROM so I only flashed the modem firmware from that release and worked fine after that!
Hope that will help you!
Thanks for your response! But I'm using a totally stock phone and I see, that this firmware is for Netherlands. Does it work on my phone or I have to wait until the Baltic version is released?
MirandoKersman said:
Thanks for your response! But I'm using a totally stock phone and I see, that this firmware is for Netherlands. Does it work on my phone or I have to wait until the Baltic version is released?
Click to expand...
Click to collapse
Hello,
I don't see any reason why it wouldn't work but just in case make a note of your Access point name settings in the mobile networks tab just to make sure that everything is the same after you flash the new release .
If you follow the steps as described in the sammobile site you won't have any problems.
What I have noticed however is that after I flashed the new modem firmware the mobile hotspot does not work anymore but this has to do with my custom ROM.
It worth trying though the performance of the phone after that is exceptional and the signal strength is higher than before and most importantly, doesn't crash anymore..
Let me know if you need help and keep me posted about your results!
i had that ROM for a while, didnt help in my case, still same issue. I'm currently on XXU1CPG3 with which the issue still persists, gonna try flashing the new TPD CSC ROM (currently the newest) ROM Version CPH9. My baseband is still CPE1, which do you guys have?
Randi said:
i had that ROM for a while, didnt help in my case, still same issue. I'm currently on XXU1CPG3 with which the issue still persists, gonna try flashing the new TPD CSC ROM (currently the newest) ROM Version CPH9. My baseband is still CPE1, which do you guys have?
Click to expand...
Click to collapse
Baseband:
G901FXXU1CPE1, I have a totally stock phone with the latest official firmware.
Latest official firmware from where? ("latest" is region dependent)
Ok, the cph firmware updated the baseband to cph, on my side it's only been a while 14 hrs since flashing but it seems the signal problem is finally fixed
Randi said:
i had that ROM for a while, didnt help in my case, still same issue. I'm currently on XXU1CPG3 with which the issue still persists, gonna try flashing the new TPD CSC ROM (currently the newest) ROM Version CPH9. My baseband is still CPE1, which do you guys have?
Click to expand...
Click to collapse
From what I understand it doesn't matter which ROM you are using the baseband is the one that causing this problem..
As I said I have a custom ROM and when I had the CPE1 baseband then I had all these problems.
If you flashed the ROM and your baseband is still CPE1 then something did not go per plan I think..
After flashing ONLY the modem firmware from the CPF6 release to my SMG901F is reported that the baseband version is CPG2 however..
This version works for sure..
I might try the CPH9 release now to see if the issues i have with the mobile hotspot will be solved
George A. said:
From what I understand it doesn't matter which ROM you are using the baseband is the one that causing this problem..
As I said I have a custom ROM and when I had the CPE1 baseband then I had all these problems.
If you flashed the ROM and your baseband is still CPE1 then something did not go per plan I think..
After flashing ONLY the modem firmware from the CPF6 release to my SMG901F is reported that the baseband version is CPG2 however..
This version works for sure..
I might try the CPH9 release now to see if the issues i have with the mobile hotspot will be solved
Click to expand...
Click to collapse
I'll try to install that CPH9 release too. Let's see what happens, because I have tried everything else.
To me it seems, that this CPE1 version is having problems with switching between network modes. I checked, that in Settings- Mobile networks- Network mode is set to LTE/3G/2G (automatic connect), but I haven't seen H+, H or Edge symbols on top of the screen. Only 4G/4G+ or no reception at all. Like it's locked in 4G network or something. And sometimes when there is no 4G network coverage, there is also no signal. But that is just my logic...
Ok, I flashed the latest CPH9 firmware and my baseband changed to CPH3. CSC Country turned to Netherlands instead of Baltic. And it seems that the issue is fixed!
I made a little test, I went to the cellar to get bad 4G reception and instead of showing No Service, 4G turned to H without losing the cell signal. Let's wait and see...
Thank you guys a lot for your help! :good:
Hi
1) I have the latest PHN version for SM-G901f stock& rooted. I see the TPD version, will it have dutch language if i flash it ( without wipe anything) in ODIN?
2) What does TPD stand for anyway?
I want to do this because i see TPD has latest security_patch sept 1
With rooted Phone there is no way (as far as i know (3) ) to get security updates without getting the message it as screenshot given under here....
I can confirm that the issue has been fixed for me as well! ****ing finally! :cyclops:
Btw it will not switch to Dutch
MirandoKersman said:
After updating to Android 6.0.1, the phone is randomly losing mobile and gps signal. It happens about 30-40 times a day, especially when moving around, like driving . Almost every time I look at my phone, I see "No service, network not found" or "gps lost" messages. After about 10 seconds, the signal comes back and everything is ok again. I have made a soft reset, a hard reset, wiped all data and cleared the phone cache, checked and cleaned the Sim card....
PS. I'm from Estonia, and the software version is G901FXXU1CPE1/G901FBAL1CPE1
Thank you in advance...
Click to expand...
Click to collapse
I'm from Indonesia and buy used g901f from singapure,
I have same problem with marsmallow latest update too
My software version is G901FXXU1CPH3/G901FOLB1CPH1/G901FXXU1CPH1
How to fix it? Step by step..
Thank you before..
*) sorry for my bad english
---------- Post added at 01:43 AM ---------- Previous post was at 01:36 AM ----------
Randi said:
I can confirm that the issue has been fixed for me as well! ****ing finally! :cyclops:
Btw it will not switch to Dutch
Click to expand...
Click to collapse
Pliss help me with step to fix it
Hello! It seems all the firmwares ending with CPE1/CPH1 are problematic. You can try some other firmware from http://www.sammobile.com/firmwares/database/SM-G901F/
Select the firmware what seems best for you, don't select the operator-based ones, like vodafone etc. If you click on the firmware and scroll the page down, you will see step-by-step instructions how to install it. Good luck!
Ok but i can't found latest country band FW have same with indonesia network (except FW country singapure now i using it)
So i'll try to download FW update 2016-09-03
Country Unknown
Build date Tue, 13 Sep 2016
Security Patch Level 2016-09-01
Product code ORL
PDA G901FXXS1CPI4
CSC G901FORL1CPF1

Categories

Resources