GT-I9000B - Kernel + Root + CWM - Galaxy S I9000 General

Hi friends, I searched some foruns with information: How Can I do Root + CWM Recovery on GT-I9000B, but I found only old methods.
Can anyone help me by sending a complete "step-by-step" on how to do this?
After that, someone recommends a specific rom that is stable?
Thanks
Sorry for bad english!

Nobody help me?

Im in the same problem.

It depends on which version of android you are using. I'm using Gingerbread, so the option I use is Mafalda 0.9.4 kernel. It WAS a great Kernel,. but I think it's a bit old since there are several new versions of android since the kernel was made (It's based on Android GB 2.3.3... now we are on 2.3.6)
Another option is talon kernel but it's even older...
For ICS you can use official version from google (the one that uses the ICSSGS 4.2 mod) or the much better Semaphore kernel ported by f4k for our Galaxy S I9000B.
Anyway, I'm at GB 2.3.6, so if you know about any UPDATED KERNEL please notify me.
Good luck!

Related

Gpc Kernel.Anyone got Zimage and Modules for it

Hey everyone
Really want the gpc Kernel unfortunently all i found so far is its only in roms
would be nice to have the kernel seperate
Any help would be great
You can try this courtesy of hg3atintin. Haven't tried it yet myself
i want it 2..................but i couldn't find any latest Kernel of gpc....i mean after v2.6
i want it 3

Custom ROMs on official gingerbread

Hi all,
For everyone asking about custom roms ont 2.3.4 here is the situation :
For everyone who have upgraded the MS2 to the Official 2.3.4, no step back is possible to Froyo 2.2 or 2.2.2.
custom ROMs based on Froyo will not work (like CM7/9 from Tezet.)
=> Someone will have to build on based on the 2.3.4 kernel.
custom ROMs based on Chinese GB seems to work...
=> MS2Ginger for exemple.
custom ROMS based on Defy+ ROMs ?
So, who want that the CM or MIUI ROMs are ported to the newer Motorola kernel ? (So everyone could choose between BLUR, CM and others ?)
I say it on an other thread that the ms2ginger and the argen2stone roms are running on an ms2 with stock gb rom. Somebody must make an cm7 with the 2.3 kernel than wie can use customroms.
thanks for your thread.
But my question is, this official rom 2.3.4 does work better than froyo? or the custom rom 2.3.7 de CM7? It might be a dumb question or it's answered in another thread, if that case sorry.
Thanks
Yes i want Miui with the new kernel ! For a better touchsreen sensitivity for eg.
I try Argen2Stone 2.7 RE but i dont see adjust scrips and keep the old dialer from stock rom.
The 2.3.4 brings some bug fixes, and some upgrades.
From the kernel point of view, the same release is used (Linux Kernel 2.6.32.9). So no major bug fixes at kernel level for my point of view. Maybe some parameters changed.
The main point is for the "upgraders" to Gingerbread that can't go back to Froyo.
boorce.com said:
Hi all,
For everyone asking about custom roms ont 2.3.4 here is the situation :
For everyone who have upgraded the MS2 to the Official 2.3.4, no step back is possible to Froyo 2.2 or 2.2.2.
custom ROMs based on Froyo will not work (like CM7/9 from Tezet.)
=> Someone will have to build on based on the 2.3.4 kernel.
custom ROMs based on Chinese GB seems to work...
=> MS2Ginger for exemple.
custom ROMS based on Defy+ ROMs ?
So, who want that the CM or MIUI ROMs are ported to the newer Motorola kernel ? (So everyone could choose between BLUR, CM and others ?)
Click to expand...
Click to collapse
I tryed to flash MS2Ginger but the MS2 doesn't turn on.
I don't know.
could Anyone post how to flash step by step ?
tks
I think that the new kernel can improve MS2 performace so a rom based on the new kernel it's much better than the old modded rom.
Simokill said:
I think that the new kernel can improve MS2 performace so a rom based on the new kernel it's much better than the old modded rom.
Click to expand...
Click to collapse
I have the same idea...waiting for some MIUI or CM7 based on this new kernel.
I'd like someone who knows what they are doing to de-blur it. I have removed as much as I dare but still have too much moto... rubbish on the phone.
yeah agreed with u guys i wish a custom rom based on new gb 2.3.4
diavolobianco said:
yeah agreed with u guys i wish a custom rom based on new gb 2.3.4
Click to expand...
Click to collapse
+1
or new FR
is true. I think it's time to leave the kernel of froyo that is old and start to compile with the new kernel brings improvements and is of GB!
GB kernel is in fact the same linux kernel version as froyo kernel, so there are not any improvements except for some minor patches.... So no reason to leave froyo.
I just don't get why you all guys updated to GB and then you all crying, you can't use custom roms and that froyo kernel is old and why gingerbread isn't used... GB kernel in custom roms isn't high priority in dev right now. Deal with it. GB kernel don't bring any valuable improvements, so only reason to leave froyo and get in GB are you all, who did that mistake and upgraded to official GB without even reading the forum here (because it was already written so many times there...).
No offense please, I'm just sayin' that GB kernel in custom roms don't have high priority, because of missing downgrade capability and because they don't bring nothing so exciting and big or valuable, nothing worth. So when dev update to GB, he can't go back to froyo - and this is quite big limitation...
Actually CM9 does work over Euro GB kernel. It is based on Chinese GB kernel. And I must say Tezet has made some really good progress with CM9.
And Defy ROMs based on Defy+ kernel have also been proved to work on Euro GB kernel.
These ROMs work if we remove devtree.img and boot.img from the update.zip and thus only flash system.
So I guess it is only a matter of time.
Anonymous_ said:
I just don't get why you all guys updated to GB and then you all crying, you can't use custom roms and that froyo kernel is old and why gingerbread isn't used... GB kernel in custom roms isn't high priority in dev right now. Deal with it. GB kernel don't bring any valuable improvements, so only reason to leave froyo and get in GB are you all, who did that mistake and upgraded to official GB without even reading the forum here (because it was already written so many times there...).
Click to expand...
Click to collapse
Good sir, your silver tongue rivals that of our finest bards! Please, travel amongst the populace, spreading joy and soothing woes.
Anonymous_ said:
I just don't get why you all guys updated to GB and then you all crying
Click to expand...
Click to collapse
No crying here, just discussion, which is what the forum is for. What was your point?
may be it's better to find a way to downgrade.
Kangburra said:
No crying here, just discussion, which is what the forum is for. What was your point?
Click to expand...
Click to collapse
I think I said my point clearly... But once again then:
I'm just sayin' that GB kernel in custom roms don't have high priority, because of missing downgrade capability and because they don't bring nothing so exciting and big or valuable, nothing worth. So when dev update to GB, he can't go back to froyo - and this is quite big limitation...
And don't take my words too personal. Easy man, easy...
Sometimes it's cool to have stock ROM. But,it will be much cooler if we can switch to custom ROM's. Stock ROMs are slower and less free RAM than CM7 or MIUI. Now,I'm getting bored with MS2Ginger2.1.
All we have to do is just wait..
hi, did anyone manage to overclock after updated to stock 2.3?
android overclock doesn't work anymore after i updated

[Q] CM 7 and MIUI (official vs unofficial) + Flash Question

Hello all,
I'm posting this thread because I'm getting a little confused after all this reading. Basically, I just need some confirmations.
Lately I've been reading a lot on CM7 and CM9 but now I'm also starting to get interested in MIUI.
I've come across:
WIUI
MIUI Pikachu edition
MIUIandroid.com
Motorola Defy MIUI.us
I underlined my 4 questions for your convenience.
So I have some Questions on Custom ROMS
As you can see, I've looked for an official MIUI build for the Defy but I can't seem to find an official MIUI build. These listed above are all 'edited' by someone.
Could someone explain what i'm (probably) overlooking? Is there an official MIUI?
At the moment WIUI and Pikachu edition look very nice.
I currently have a Bayer (aka red lense) Defy (MB525)
stock android 2.2.2 on 2.6.32.9 kernel.
Systemversion: Version.34.164.3.MB525.Retail.en.FR.
Build number: 3.4.2-164
Which means I have a Froyo/Defy/'CM7' Kernel
CM7 and MIUI(GB) are all meant to be flashed on this Froyo/Defy/CM7 kernel, am I correct?
I find the '(GB)' with MIUI rather confusing, it's android 2.3.x but it's running Froyo kernel/Defy/CM7 kernel and not a GB/Defy+/CM9 kernel.
Now, the flashing
If I decide to flash a custom ROM: CM7.2 or a version of (GB) MIUI:
Can I just flash MIUI or CM7.2 RC1 on my current build or do I need to flash CEE or Nordic 2.2.2 first? I prefer not to lose my downgradeability.
I assume a flash from my current build to CEE or Nordic via RSDlite will result in an efuse so I can't flash my full 34.164.3.MB525.Retail.en.FR SBF anymore, or am I mistaken?
I currently have a full SBF of my original stock ROM, just in case.
Kind Regards, Config.
configuration said:
Hello all,
I'm posting this thread because I'm getting a little confused after all this reading. Basically, I just need some confirmations.
Lately I've been reading a lot on CM7 and CM9 but now I'm also starting to get interested in MIUI.
I've come across:
WIUI
MIUI Pikachu edition
MIUIandroid.com
Motorola Defy MIUI.us
I underlined my 4 questions for your convenience.
So I have some Questions on Custom ROMS
As you can see, I've looked for an official MIUI build for the Defy but I can't seem to find an official MIUI build. These listed above are all 'edited' by someone.
Could someone explain what i'm (probably) overlooking? Is there an official MIUI?
At the moment WIUI and Pikachu edition look very nice.
I currently have a Bayer (aka red lense) Defy (MB525)
stock android 2.2.2 on 2.6.32.9 kernel.
Systemversion: Version.34.164.3.MB525.Retail.en.FR.
Build number: 3.4.2-164
Which means I have a Froyo/Defy/'CM7' Kernel
CM7 and MIUI(GB) are all meant to be flashed on this Froyo/Defy/CM7 kernel, am I correct?
I find the '(GB)' with MIUI rather confusing, it's android 2.3.x but it's running Froyo kernel/Defy/CM7 kernel and not a GB/Defy+/CM9 kernel.
Now, the flashing
If I decide to flash a custom ROM: CM7.2 or a version of (GB) MIUI:
Can I just flash MIUI or CM7.2 RC1 on my current build or do I need to flash CEE or Nordic 2.2.2 first? I prefer not to lose my downgradeability.
I assume a flash from my current build to CEE or Nordic via RSDlite will result in an efuse so I can't flash my full 34.164.3.MB525.Retail.en.FR SBF anymore, or am I mistaken?
I currently have a full SBF of my original stock ROM, just in case.
Kind Regards, Config.
Click to expand...
Click to collapse
I have a Defy with bayer camera module, all I did for installing custom roms was root, install 2nd init, reboot to boot loader and wipe all data/cache (this is the first step in any of the mentioned ROMs, but please read the respective step-by-step tutorials in case I missed something), and then flashed the desired CM or CM-based (like MIUI) rom
The defy versions all basically run over froyo kernel, as it's the last official kernel released for the device (GB kernels are either leaked or belong to the defy+) , I never flashed a newer one and have tested quite a few MIUI and CM versions, including:
MIUI.us (oficial US MIUI adaptation team)
MIUIandroid.com (British team)
WIUI (Wajk's multilanguage version, and also has an ICS test version, that I also tried)
CM7.1 and Epsylon3's CM9 for Defy (in beta, but more stable than WIUI's ICS for Defy)
I don't actually know if flashing a newer kernel would be any use for these roms, I know defy and defy+ (different kernels) roms are not interchangeable, so I wouln't bother with it unless you are flashing a full sbf rom (in which case I have no experience with)
Persechini said:
TEXT
Click to expand...
Click to collapse
Thanks,
If I may ask, What ROM would you personally recommend?
Does anyone know the answer on my 2 last questions?
Config
From the ones I've used for a while, I suggest the official MIUI (gingerbread) if you wan't to be safe and CM9 if you want some ICS sweetness and feel good about dealing with the perks of a beta release. Once we finally have an official (or at least a stable/less buggy alternative) version of ICS MIUI for defy, I'd go with that, definitely
Persechini said:
From the ones I've used for a while, I suggest the official MIUI (gingerbread) if you wan't to be safe and CM9 if you want some ICS sweetness and feel good about dealing with the perks of a beta release. Once we finally have an official (or at least a stable/less buggy alternative) version of ICS MIUI for defy, I'd go with that, definitely
Click to expand...
Click to collapse
With official MIUI, do you mean the US version or the British?
For what i know, official miui is from chinese site miui.com. All others have some modification. More o less, all of them came frome miui's official releases. In my case, wiui is the most stable i been using since long time ago. I'm waiting for stable ics miui too cause there aren't an official rom from miui.com for defy. And the reason for that is because cm9 it's still in beta, and miui is based on cm project. All v4 around for defy are just port from others device's roms and have a lot of bugs, especially mobile data. As we know, motorola made our defy whit a locked bootloader whit froyo kernel in it. For that reason is more easy make a rom froyo kernel based. But isn't the unique option. there's a rom maded by walter 79 whit gb kernel that have excellent results, especially In battery life. Cm9 whit gb kernel too.
One more thing: miui (not v4) and cm7, are both android 2.3.x
Enviado desde mi MB525 usando Tapatalk
configuration said:
With official MIUI, do you mean the US version or the British?
Click to expand...
Click to collapse
The really official one is the chinese, the others are, as ldiomedi said, translation/adaptation teams. Some apps may be added or removed, but usually nothing you would notice. I settled using the british version because the phone numbers where formatted the same way as in Brasil ((xx)xxxx xxxx) and the brazillian team was lagging behind updates. WIUI gathers language options, but I don't know about other adaptations.
So if I'm correct:
If I would like to use MIUIandroid I have to get the newest build here, the MIUI.US over here and WIUI just at the forums.
My SD card is getting a bit small, it's only 2gig.
So before leaving my stock ROM I would like to switch it.
Are there any extra steps I should do because of the SD-card switching?
You don't need to keep the rom in the sd after installing it, use each one a bit to see which you like better. Install the definite one and then delete the roms from the sd card, you can always redownload if you want to change again latter.
I know I don't have to keep those files on my SD-card.
It's just that 2gb is getting too small to store some photos and files.
I would go for the GB WIUI rom as it has both nl and fr translations. I tried it in the past and the translations were good. It is also optimized for the defy. The others handle many different devices.
labsin said:
I would go for the GB WIUI rom as it has both nl and fr translations. I tried it in the past and the translations were good. It is also optimized for the defy. The others handle many different devices.
Click to expand...
Click to collapse
Nice, I'll try WIUI I guess.
Do you know the answer on the following questions?
configuration said:
If I decide to flash a custom ROM: CM7.2 or a version of (GB) MIUI:
Can I just flash MIUI or CM7.2 RC1 on my current build or do I need to flash CEE or Nordic 2.2.2 first? I prefer not to lose my downgradeability.
I assume a flash from my current build to CEE or Nordic via RSDlite will result in an efuse so I can't flash my full 34.164.3.MB525.Retail.en.FR SBF anymore, or am I mistaken?
I currently have a full SBF of my original stock ROM, just in case.
Kind Regards, Config.
Click to expand...
Click to collapse
A full SBF with a nandroid backup should do for an 'insurance' I hope.
Changning from cm7.2 to miuiandroid gb rom
Hai memebers,
I want to flash miuiandroid GB rom on my Motorola defy.
Currently i m on CM 7.2 .
Please tel me the correct steps to flash the new rom??
Im confused as almost every post say how to update from stock rom.!

Cyanogenmod 10.2 Kernel, which version?

Hi all,
I'm testing the CM10.2 nighties on my Razr M from two weeks. Everything seems stable but I want to try it with the SmartassV2 governor that the CM kernel is missing. I started searching for alternative kernels (like Aaaagh's one) and I noticed that the actual CM10.2 kernel is v.3.0.96: wasn't Android 4.3 supposed to have the 3.4.62 version instead? If so, why Cyanogemod is stuck with th old 3.0.96 version? I've searched for answers but I've find none...
Is it possible that every CM10.2 build has the old kernel, or is this happening only with the Razr M build?
Maybe I'm just missing somenthing...
j27h said:
Hi all,
I'm testing the CM10.2 nighties on my Razr M from two weeks. Everything seems stable but I want to try it with the SmartassV2 governor that the CM kernel is missing. I started searching for alternative kernels (like Aaaagh's one) and I noticed that the actual CM10.2 kernel is v.3.0.96: wasn't Android 4.3 supposed to have the 3.4.62 version instead? If so, why Cyanogemod is stuck with th old 3.0.96 version? I've searched for answers but I've find none...
Is it possible that every CM10.2 build has the old kernel, or is this happening only with the Razr M build?
Maybe I'm just missing somenthing...
Click to expand...
Click to collapse
3.4 kernel for MSM8960 isn't quite available yet.
Hopefully Moto will update to 3.4 if we ever receive official 4.2 (or 4.3)
You can contribute and follow the progress (dev wise) at http://forum.xda-developers.com/showthread.php?t=2243410 and http://www.droidrzr.com/index.php/t...lopment-0610-android-booting-firmware-issues/
Ok, everything isclear now! Thanks for the quick response!
Basically we've two options:
1) use the 3.0 kernel with backported 3.4 funcions (the one integrated in the CM builds)
2) use a 3.4 kernel (like Aaaargh's or others) non totally adapted to our device
And all this because we're still stuck with Android 4.1.2 thanks to Motorola/Google/Verizon...
At this point, I think te safest thing is to keep using the 3.0 kernel... Apart for the new governors/schedulers, why soul I prefer a 3.4 kernel (maybe this is a silly question too...)? Are they usable/stable even if they're not exactly matching our device?

need working links to stable based-on-stock 4.2.2 and 4.3 kernels

Hi guys
i've been googling and searching through xda for based-on-stock 4.2.2 and 4.3 kernels for the past couple of days, but the links are all down.. i don't want KK or LP because i don't like them, plus text reflow doesn't work in those anymore.. would someone please help in providing a link to stable JB kernels.. such as Adam kernel for example...
thank you
What version of Android is currently on the device?
I'm running omega v14.1 which is based on Android 4.2.2
but I also downloaded omega v17 which is based on 4.3
so having kernels for both would be nice
Ok, so you never upgraded the stock ROM from the originals? If the links are down you're going to have to hunt, as I know you don't want to download a stock ROM just to get the kernel.
Thing is.. I want to stay on jelly bean. I don't want the stock kernel. I wants a tweaked kernel based on the stock kernel with all the extra governors and features.. like Adam kernel by wanam. But the problem is these are a bit old and all the links are dead. Even wanam's site is down (no idea why).
So I really would appreciate it if someone who still has copies of these would share them here
thanks again

Categories

Resources