yesterday
i flash rom
but... bricked and i do not backup before flash
now i can open TWRP recovery mode when i us kindle fire utility and reinstall TWRP again.
but i do not have file(good fire) in kindle fire.
What should I do?
T_T
Thank you very much.
Plug in ur kf to pc or lap
Fire up kfu
in kfu select option 1.boot mode and 1. Normal mode
If it say waiting for device, hold power button of ur kindle until it shut down and turn it on again
Sent from my LG-P500 using xda premium
do you have twrp installed and adb working?
Sent from my Kindle Fire using xda premium
Thank you
thank you very much
Related
I tried to flash TWRP but it stays on waiting for device. Any suggestions, I tried to go into fastboot but do not know how to get from there to TWRP install.
Does your computer see the fire? Some have lost drivers during the process.
Also there us a good resource in the dev section in this very issue
Sent from my PC36100 using xda premium
Yes, it does recognize the Fire, I believe I was not in Fastboot, since I did not see how to go from Fastboot into the install TWRP menu.
Hiya,
What status does the tool display for fastboot, mode, and adb
I recently rooted my kindle no problems and installed android market and TWRP with no problem using kindle fire utility but one day i accidently pressed 4 on the Kindle fire utility and it did the stock update.zip on my kindle and i lost my root + TWRP recovery but regained root access by using kindle utility again but i cant seem to get TWRP back on there. every time i go to press 5 for install twrp it says TWRP img found and tries to install but i end up waiting forever and i power off and on like it says any suggestions?
I was never able to get TWRP to install with KFU. I eventually gave up using KFU and just installed it manually, which isn't hard to do at all:
http://liliputing.com/2011/12/how-t...ire-backup-restore-flash-custom-firmware.html
a few notes on the link: there is a typo in there, make sure you type adb. another suggestion i'd make is to put the img in the platform-tools folder
So unfortunately i clicked reboot into recovery under CM7 and i am now in a bootloop. also unfortunately i dont have my laptop which has everything i already need to just type in the 4000 commmand. im also having difficulty installing the sdk platform 2.3.3 api 10. is there any way for me to get out of the boot loop?
Look here, this might help: http://forum.xda-developers.com/showthread.php?t=1422832
Use the kindle fire utility and reinstall twrp
1 turn kindle off
2 run kindle fire utility
3 install twrp
4 plug in kindle
5 follow instructions on screen
Sent from my Kindle Fire using Tapatalk
Hello, i used the Kindle Fire Utility to root my Kindle Fire on 6.2.2 and i did the root and on my kindle i flashed FIREFIREFIRE but when i tried to boot up into TWRP recovery i noticed that it wouldnt it would just restart the boot process. I will admit that i am sort of a noob and dont really have a whole lot of experience with android developement but i didnt know if could go on the kindle fire utility and flash TWRP because i was afraid of bricking my kindle. Any thoughts??
fff
jayhawk4life said:
Hello, i used the Kindle Fire Utility to root my Kindle Fire on 6.2.2 and i did the root and on my kindle i flashed FIREFIREFIRE but when i tried to boot up into TWRP recovery i noticed that it wouldnt it would just restart the boot process. I will admit that i am sort of a noob and dont really have a whole lot of experience with android developement but i didnt know if could go on the kindle fire utility and flash TWRP because i was afraid of bricking my kindle. Any thoughts??
Click to expand...
Click to collapse
Turn off your KF.
Turn on and wait for yellow triangle (in older FFF) or logo(in FFF 1.3).
At this moment press and hold power button until light goes red. You will boot into TWRP.
I did and the screen flickered and turned on. I used Kindle Fire Utility with BurritoRoot3. Once it was on my kindle i used BurritoRoot3 to install FIREFIREFIRE and i dont think it flashed TWRP but i didnt know if i could still flash TWRP and if you can how?
You still can use fire utility to flush TWRP. Get the last version from http://forum.xda-developers.com/showthread.php?t=1399889.
Or use gscript : http://forum.xda-developers.com/showthread.php?t=1500935 for install touch CWM. It not recuire adb, but with CWM you cannot restore TWRP backups.
Or try :
http://liliputing.com/2011/12/how-t...ire-backup-restore-flash-custom-firmware.html
or
http://rootzwiki.com/topic/12363-how-to-windows-install-twrp-20-on-your-kindle-fire/
check recovery.img in the recovery folder of kfu - has to be ~10mb
if not delete the file and redo the installation
there is a little error in the current run.bat of kfu (0.9.3) - use the run.bat from this post:
http://forum.xda-developers.com/showpost.php?p=23536888&postcount=1007
I actually re rooted my kindle after the 6.3 update and it automatically installed twrp which I use to install cm9 kang.
Sent from my GT-I9100 using Tapatalk 2
ok so i tried to to root kindle fire 1st gen and i got twrp recovery but no superuser or unlocked bootloader or firefirefire so i installed a 4.2.2 aosp rom with gapps then i restoreed cache and dailvic cache and system and i think everything then tried to boot and it started booting into kindlefire logo bute fire was ritten in blue and it sais booting... at the bottom but it never goes past this PLZZZZZZZ HELP ME!
Connect it to your computer and go to kindle fire utility and boot it into recovery then fastboot then try normal.
broken kindle
Bneyboy095 said:
Connect it to your computer and go to kindle fire utility and boot it into recovery then fastboot then try normal.
Click to expand...
Click to collapse
anything i do on that it just boots back up into the same thing
broken kindle
Bneyboy095 said:
Connect it to your computer and go to kindle fire utility and boot it into recovery then fastboot then try normal.
Click to expand...
Click to collapse
still not working but plz keep trying to help me this is my sisters kindle i borrowd it from my 11 year old sister
if you can get into twrp select mount. it will mount it on your computer normaly then download SuperSu.zip and put on the root of sd (means in no subfolder) then flash it. it should boot normaly
When you root your device (Kfu method) you wont have FFF or superuser or galls. You have to do those things manually. On all the guides in this forum it says that.
Sent from my Blazing Jellybean