Related
When my device is on battery power, it is stuck at the lowest brightness. If I set it to higher brightness using the control panel or spb shell, it stays at the lowest brightness. I can adjust the brightness normally when plugged in. I already tried a soft reset. Help!
fix
Start, System, Backlight, the top one can be adjusted to fix your hapiness!
dfales16 said:
Start, System, Backlight, the top one can be adjusted to fix your hapiness!
Click to expand...
Click to collapse
That didn't fix it. I just did a hard reset.
It certainly is unusual to see a Mogul owner admit that the problem they are having with their device is due to their brightness problem.
(that's a joke, son)
Hi all,
On a number of occasions, I've used Market apps to control the screen brightness, either manually (like a brightness widget) or scheduled (using Timeriffic - a great tool for automatic profile changes throughout the day).
Apparently, these apps are not aware of the correct minimum brightness supported by the Leo, making it too easy to go too low, which essentially disables the display completely.
Touch still works, so if I'm lucky enough to remember the location of the widget/slider/controls, I may be able to turn brightness back up to a "sane" level.
For example, Timeriffic turns the screen off with a brightness level of 10% - 15% is the lowest working setting.
If I'm unable to fix it this way, I'm basically forced to reset. The problem is that Android *remembers* this setting after a reboot, and reapplies it just when the device is vibrated slightly at the "Android" logo animation. Thus, with a black screen, it is impossible for me to unlock the SIM, hard to unlock the screen lock, and virtually impossible to correct the brightness setting. I need to remove my data.img ("hard resetting" Android) and restore what I can from backups.
The problem also seems to occur with the standard screen dimming which occurs at about half time before the "screen off" setting. I can see the display start to dim, then it suddeny turns off. In this case, however, Android of course reverts to normal brightness at the touch of the screen or press of a button.
On a related note, I have experienced (like right now) that brightness range used by Android is much dimmer then normal. That is, using the regular brightness slider in Settings, I can only vary between almost invisible (min) and quite dim (max). Curiously, in this situation, the display can get *much* dimmer than normal, without becoming disabled.
Any ideas on these issues would be most welcome!
Workarounds found later in this thread:
- Shine a bright light on the screen - the graphics are still there if you look really hard. It's not a joke!
- Use Screencast in Droid Explorer to "remote control" your Android
- adb shell "echo 255 >/sys/class/leds/lcd-backlight/brightness"
ugumba said:
Hi all,
On a number of occasions, I've used Market apps to control the screen brightness, either manually (like a brightness widget) or scheduled (using Timeriffic - a great tool for automatic profile changes throughout the day).
Apparently, these apps are not aware of the correct minimum brightness supported by the Leo, making it too easy to go too low, which essentially disables the display completely.
Touch still works, so if I'm lucky enough to remember the location of the widget/slider/controls, I may be able to turn brightness back up to a "sane" level.
For example, Timeriffic turns the screen off with a brightness level of 10% - 15% is the lowest working setting.
If I'm unable to fix it this way, I'm basically forced to reset. The problem is that Android *remembers* this setting after a reboot, and reapplies it just when the device is vibrated slightly at the "Android" logo animation. Thus, with a black screen, it is impossible for me to unlock the SIM, hard to unlock the screen lock, and virtually impossible to correct the brightness setting. I need to remove my data.img ("hard resetting" Android) and restore what I can from backups.
The problem also seems to occur with the standard screen dimming which occurs at about half time before the "screen off" setting. I can see the display start to dim, then it suddeny turns off. In this case, however, Android of course reverts to normal brightness at the touch of the screen or press of a button.
On a related note, I have experienced (like right now) that brightness range used by Android is much dimmer then normal. That is, using the regular brightness slider in Settings, I can only vary between almost invisible (min) and quite dim (max). Curiously, in this situation, the display can get *much* dimmer than normal, without becoming disabled.
Any ideas on these issues would be most welcome!
Click to expand...
Click to collapse
I don't know these app(s) but if they are writing their settings and configured values into a ini or settings file, than you might be able to connect via adb and change the setting by this way.
With tools like Droidexplorer or ADB magic, browsing through the files should be very comfortable and you might find the correct file.
this happens on regular android devices ...i have a couple of them
thatruth132 said:
this happens on regular android devices ...i have a couple of them
Click to expand...
Click to collapse
What happens? That brightness is set too low, essentially disabling the screen, so you're forced to hard reset or perform some root magic? How do you cope with it? Or does it happen that the permitted brightness range is just dimmer than usual?
Btw, until there is no light-sensor support in kernel, you can't use such apps for the brightness
Stills a good advice
I have had the same issue with the brightness range being too low. The max brightness is really dim and the colors don't seem right. That may just be the dimming effect though. If I restart the phone it seems to take care of this. I have not had the screen go below the minimum level and turn off though.
is there a fix for this. i just experienced this problem
I experienced the same with Multicon widgets.. had to delete Android and start over
somebully said:
I experienced the same with Multicon widgets.. had to delete Android and start over
Click to expand...
Click to collapse
Oh wow, not good at all, crap...
so that means if i do that i'll lose everything huh?
Theres no way to restore the factory brightness or factory settings for the android?
aznsHD2 said:
Oh wow, not good at all, crap...
so that means if i do that i'll lose everything huh?
Theres no way to restore the factory brightness or factory settings for the android?
Click to expand...
Click to collapse
As long as you have a working WinMo it should be possible to edit the values of brightness, but I have no idea where this information is stored.
Deleting Android folder and unzipping again is esentially restoring to factory settings.
yea this happens to me all the time, its a *****. it cuts off at exactly 12% for me. what i do is have aldiko(a book reader) on the home screen. if i click on it and open a book i can just swipe on the left side of the screen to adjust brightness. since i know that its on the home screeen on the right side middle, i can usually find my way back to it.
somebully said:
As long as you have a working WinMo it should be possible to edit the values of brightness, but I have no idea where this information is stored.
Deleting Android folder and unzipping again is esentially restoring to factory settings.
Click to expand...
Click to collapse
which means that i'll lose everything such as data correct? new contacts etc. msgs...
any thing on this... isnt their a file in the android folder that i could maybe replace to restore to factory settings.
and could someone post a screen shot of their phone so i know where the numbers for the pin code lockscreen. tryin to get past that, then i can adjust my brightness
LOL I experienced it one time. And I must delete data.img to restore the phone. After this, I don't use any brightness tools (except ones already in the Android build).
If anyone have solution, please point us
Well i was able to get my screen back to normal. lol.
I didnt delete the data.img, i simply copied it and then removed it, started a fresh install, and then just marked on my screen where the numbers were, turned it off, put the old data.img back. Followed my marks, and was able to unlock it and then found the power control widget. And bam! screen back to bright...
This might work for you!
Erm... In similar circumstances I found this worked...
I was trying out different Android builds and I found a screen brightness widget. It had various available levels of brightness, one being 0%. As soon as I selected it I felt pretty stupid as true to it's word it gave me 0% brightness placing me in a similar position to the OP.
My Solution. I used my (very bright) led torch to light the screen. By playing around with the angle and beam width I found I could just make out the on screen graphics enough to re-adjust the brightness level.
Simples!
Just as " Justblair " said .. you can place your device under a very bright light thus you'll be able to see the screen and what it's showing .. idk what build you guys are using but in cyanogen you can adjust the lowest dim level so that any app or widget tries to set the brightness to 0% it's automatically set to your preset, 15% for instance.
I've only faced this problem once
Is it absolutely necessary to flood the main thread with all these useless noob posts?
It really has nothing to do with Android development on HD2 and should be posted in the General section IMO.
kawazaki said:
Just as " Justblair " said .. you can place your device under a very bright light thus you'll be able to see the screen and what it's showing .. idk what build you guys are using but in cyanogen you can adjust the lowest dim level so that any app or widget tries to set the brightness to 0% it's automatically set to your preset, 15% for instance.
I've only faced this problem once
Click to expand...
Click to collapse
Cyanogen allows you a max dim level of 26 - which is too little on the HD2.
In Tasker, 30 is the lowest setting that still provides light. Maybe Cyanogen can be patched for the HD2 in coming builds?
Thanks for the tip on shining a bright light on the screen.
Another tip is to use Droid Explorer's "Screencast" feature, to view and control your Android's screen on your PC desktop. Of course, the brightness setting has no effect here.
Running the Alliance rom, clean install on stock slot. No other major issues that I can think of. I've got it set to maximum brightness, not on auto dimmer. When the screen dims after 30 seconds or so, when its about to turn off due to inactivity, half the time when I tap the screen, it recovers to full brightness. The other half the time, it gets a little brighter than the dim mode, but not much. It stays way dimmer than the full brightness setting that I keep it on. I have to pull the notification bar down, slide the dimmer down, and back up to maximum, and I'm good to go until the next time it does it. Which could be in 30 seconds when it dims again.
Anybody else having this issue?
scott_65 said:
Running the Alliance rom, clean install on stock slot. No other major issues that I can think of. I've got it set to maximum brightness, not on auto dimmer. When the screen dims after 30 seconds or so, when its about to turn off due to inactivity, half the time when I tap the screen, it recovers to full brightness. The other half the time, it gets a little brighter than the dim mode, but not much. It stays way dimmer than the full brightness setting that I keep it on. I have to pull the notification bar down, slide the dimmer down, and back up to maximum, and I'm good to go until the next time it does it. Which could be in 30 seconds when it dims again.
Anybody else having this issue?
Click to expand...
Click to collapse
I have the same thing happening. Personally I have been too lazy about it to check through settings to see if I've done something. I'll check on it and see if I can find a fix.
*Update*
I've checked through all my settings and can find nothing that might cause it. I don't have Auto Brightness set, nor do I have Auto Adjust Screen Tone turned on. I saw nothing in the Alliance Settings either. I believe it is a system setting that is probably buried in code somewhere (far beyond my knowledge).
**Update** I reported the bug in the Alliance Forum.
I tend to agree. I've looked through settings, etc. just as you have, to no avail. I'm nearly certain it's done it since install, so I don't think it's something that I've changed. But I could be wrong. I've also tried it with auto adjust turned on, does the same thing. Auto adjusts to a dimmer setting sometimes
When I'm in a light room the screen goes brighter but if I walk into a darker room, the screen doesn't dim unless I lock and then unlock the screen.
Anyone else having similar issues?
Yep got the same here. Thought I had a faulty ambient light sensor but obviously not.
Sent from my SM-G935F using Tapatalk
Just tried it by covering the light sensor to make sure, no problem here (G935F). My only concern related to brightness is that the s7 just has auto brightness, but no adaptive brightness.
Uncheck the auto box and recheck. Then don't touch the slider. It's usually because in marshmallow the slider moves with the auto bright and most people touch it which makes it hold position.
jackdforme said:
Uncheck the auto box and recheck. Then don't touch the slider. It's usually because in marshmallow the slider moves with the auto bright and most people touch it which makes it hold position.
Click to expand...
Click to collapse
There seems to be a bug somewhere still. I just tried to move the slider while auto brightness is ticked and to cover the light sensor afterwards again and it still worked and to my surprise it even took into account that I lowered the brightness and took also a lower brightness at the covered state and took my initial setting after uncovering, pretty nice, so there is indeed still adaptive brightness. After ticking und unticking auto it went back taking the default steps for brightness as before.
Having the same issue here
Definately not touched the slider.
Also, I have tested the light sensor and it appears to work fine so definately a software issue. Though I imagine we will see some software updates to fix bugs shortly after the official release date.
So you can adjust the slider with the box checked and get various levels of auto? Does it learn?
jackdforme said:
So you can adjust the slider with the box checked and get various levels of auto? Does it learn?
Click to expand...
Click to collapse
Yes.
I can't tell for sure, when I change further steps the previous seems to stick, at least to some extend so there is a logic behind it, but I can't tell for sure if it really is based on each step and sets it accordingly or if it's just changes the range it operates in. Anyways I'm a happy camper.
Also, I could reproduce the device not changing the brightness, when I put it to full at darkness it won't move anymore in auto. But as soon as I lower it again it will also change accordingly again, maybe at those with the stuck brightness the min brightness is only raised, but not lowered anymore, but just an assumption and doesn't help anyone atm unfortunately.
Use lux in play store
Sent from my SM-N920W8 using Tapatalk
https://play.google.com/store/apps/details?id=com.velis.auto.brightness
This is the first Galaxy phone I had, that Auto brightness actually works the way I like it.
It seems to be working fine now. It just takes a few seconds for the screen to dim (maybe I was being impatient).
After testing it further it's actually really good auto brightness.
It works, just takes some time to adjust to the lighting. Maybe the default settings are set to a certain time. Maybe with root we can adjust this..
AngioNicholai said:
It works, just takes some time to adjust to the lighting. Maybe the default settings are set to a certain time. Maybe with root we can adjust this..
Click to expand...
Click to collapse
It seems to only do it quickly when the device is lay down (as 954wrecker said). Maybe Samsung did that so it doesn't annoy you when using your phone.
this is definitely a bug imo... the auto brightness doesn't change for me either...
CuBz90 said:
When I'm in a light room the screen goes brighter but if I walk into a darker room, the screen doesn't dim unless I lock and then unlock the screen.
Anyone else having similar issues?
Click to expand...
Click to collapse
I also have an auto briteness issue, when I disable AutoBrite and set it manually about half my apps override the setting and enable AutoBriteness in the app's screen usually dimming the screen? SpadesFree one example and I do not see an override in the app.
Confimed that I'm having same issue, auto brightness not adjusting and slider not movingoing. Have to move it manually
Same issue. It needs to be fixed manually by editing services.jar (root needed)
Nothing else will work. None of google play apps will help with that issue. Does not matter what you do, it will always dimming if you don't fix it in framework.jar
Try it out: http://forum.xda-developers.com/s7-edge/development/auto-brightness-bug-try-fix-t3339858
Got my hands on a S7 Edge these days, and I noticed the auto brightness does absolutely nothing. If I tick it and move the slider / shine a light on the light sensor / cover the light sensor, nothing happens, the brightness stays the same. Only way to adjust brightness is with auto off.
I decided to re-flash (emergency mode) with Kies and it worked the first time after the phone booted up, but after a reboot, it's back to not working.
Tried it another time with another software from sammobile, this time with Kies, it didn't work the first time, then after 10 minutes it did work but after a reboot it was gone. So these events are very unreliable / weird and therefore it is hard to assume a logical conclusion after what happened.
PS: Did many factory resets, both from phone settings and recovery, to no success. It just does not work.
PS2: Tested the light sensor with the diagnostic menu (*#0*#) and it is working correctly. It says 0 lux when I cover the sensor, and different positive values (from 20-50-100 to several thousands) when I shine different lights on it.
If you have any suggestion, I'd be glad, it's driving me crazy.
Mine has started doing the same thing, if I do the diagnostic, though, nothing changes the lux value of "0". However, after leaving that menu, and going back to regular, if I untick and then tick auto, it works, for a while... Can't figure out what is wrong...