Database Users

Can't Restart my CM MT3G?

I have flashed the new CyanogenMod and the Cyanogen Recovery 1.4 and when I wipe everything and flash, it'll load up and I can use the phone 100% perfectly, but once I reboot my phone, or turn it off and on, it never goes past the green boot screen. Anyone have any solutions/reasons why it does that? It's with every single Cyanogen mod too, i've tried several of them.

Probably because you have a lot of apps?
If not, reflash it.

tmc_adio07 said:
I have flashed the new CyanogenMod and the Cyanogen Recovery 1.4 and when I wipe everything and flash, it'll load up and I can use the phone 100% perfectly, but once I reboot my phone, or turn it off and on, it never goes past the green boot screen. Anyone have any solutions/reasons why it does that? It's with every single Cyanogen mod too, i've tried several of them.
Click to expand...
Click to collapse
what do you actually flash and what is the actual process, you shouldnt have any issues after it boots up the first time, wipe everything and make an exterior partition meaning get rid of your cyanogen recovery 1.4 and get amon ra's latest... look in the dev section and read up on cyan's page on how to flash the rom

mt3g said:
what do you actually flash and what is the actual process, you shouldnt have any issues after it boots up the first time, wipe everything and make an exterior partition meaning get rid of your cyanogen recovery 1.4 and get amon ra's latest... look in the dev section and read up on cyan's page on how to flash the rom
Click to expand...
Click to collapse
Thanks for help man, right now I'm running dwang's rom 100% perfect w/ no issues at all. it can reboot and everything just fine. I'm just a little worried on going back and trying to flash cyanogens.
When I installed it, I first did the root process, downloading the .apk file and going through all that part smooth, then I downloaded and flashed the Cyanogen Recovery 1.4, and from there I downloaded the two files (DRC83_base and the latest cyan's rom, i forgot the version #) and applied update from SD, first doing DRC83 and right after doing the rom itself, without rebooting the phone. It loads up A-OK and I can installl the apps and go about my business, but once I need to restart my phone, it just never turns back on. I'm puzzled completely...I even did the whole unroot and reroot thing and STILL i'm not having any luck.

K I got confused in there some where did you flash a cyan rom at all in there I read that you flashed the drc83 zip file but sounds like you just flashed that and booted the phone lol... never tried that but.... any way it seems like you are doing everything correct onlything I could suggest is make sure you have the correct htc base image, and make sure you wipe and repair everything!!!!! and also try a differant download of cyanogen as you might have gotten a bad one or something I have never had any issues with a cyanogen rom except maybe a FC back on 4.0xx or something

兄弟，估计你刷成砖了。同情ing。。

MOD PLEASE DELETE Thread is of No use

I Think i have bricked my nexus s ......it wont startup and goes to do first setup but force closes....i can access recovery but when i flash a rom it aborts ....only just bought it

U can odin it back to stock. Check out the android dev forums
Sent from my Nexus S using XDA App

afishpie said:
U can odin it back to stock. Check out the android dev forums
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Please can you elaborate...or point me in right direction......recovery is now only accessible by flashing it first....phone just wont do anything

download a 2.3.3 nandroid backup and restore to it using clockwork recovery
ignore odin.
http://forum.xda-developers.com/showthread.php?t=884093
update to 2.3.3 using http://android.clients.google.com/p...2cf141e6a.signed-soju-ota-102588.f182cf14.zip
or just download CM7 and flash that along with gapps (wipe dalvik/cache/factory)
and your phone is not bricked. the definition of a bricked phone is a phone who cannot access recovery/fastboot/etc.. can access absolutely nothing

Well, he does say that his attempts to flash a rom always abort...
OP, we need more details.
Are you using Clockwork Recovery? Which version? Try an older/newer version...
What ROM are you trying to flash? Have you tried others?
What happens when you try a normal boot? You say you get as far as the first setup screen?
Have you tried a Factory Reset of the phone from within recovery (stock or clockwork)?

distortedloop said:
Well, he does say that his attempts to flash a rom always abort...
OP, we need more details.
Are you using Clockwork Recovery? Which version? Try an older/newer version...
What ROM are you trying to flash? Have you tried others?
What happens when you try a normal boot? You say you get as far as the first setup screen?
Have you tried a Factory Reset of the phone from within recovery (stock or clockwork)?
Click to expand...
Click to collapse
Many thanks to both of you.....for your help .....so much appreciated......i have got past first setup screen after applying a nandroid backup......it finally worked after 5 times trying....but i have stock android recovery but rom manager on phone .....how can i get clockwork mod back as everytime i flash it.....i get to use it for that one instance ans then it returns to stock android recovery

I think it might be okay now ....after titanium said busybox was installed....i dont think it was done correectly.....after downloading busy box from market....recovery seems to be sticking rather then reverting back to android. Just to check....is there anything i should do to check all is well on my phone and also while flashing i think i changed build number from IR to GH (what are the implications of this move? many thanks...phew
EDIT- NO recovery still wont stay....any ideas?

menov321 said:
I think it might be okay now ....after titanium said busybox was installed....i dont think it was done correectly.....after downloading busy box from market....recovery seems to be sticking rather then reverting back to android. Just to check....is there anything i should do to check all is well on my phone and also while flashing i think i changed build number from IR to GH (what are the implications of this move? many thanks...phew
EDIT- NO recovery still wont stay....any ideas?
Click to expand...
Click to collapse
That's normal. See below:
It's normal to lose the recovery after the reboot, the steps to flash the CW recovery needs to be repeated every time you want to access the CW recovery.
This is due the build in protection in 2.3
As some one pointed it out on another topic, the good thing about this is that you'll never lose the stock recovery of 2.3, thus minimizing the chance of a bricked phone.
If you want to the CW recovery to remain permanently, you'll need to rename /etc/install-recovery.sh to something thing else

sano614 said:
That's normal. See below:
It's normal to lose the recovery after the reboot, the steps to flash the CW recovery needs to be repeated every time you want to access the CW recovery.
This is due the build in protection in 2.3
As some one pointed it out on another topic, the good thing about this is that you'll never lose the stock recovery of 2.3, thus minimizing the chance of a bricked phone.
If you want to the CW recovery to remain permanently, you'll need to rename /etc/install-recovery.sh to something thing else
Click to expand...
Click to collapse
Thankyou SOOO MUCH.....you put my mind at rest......can you maybe help me with one other thing.....WHEN I MESSED UP EARLIER i flashed a different rom build.....does this have any negative affect on the phone....my stock rom was a IR something but i flashed a GR or GH something....

menov321 said:
Thankyou SOOO MUCH.....you put my mind at rest......can you maybe help me with one other thing.....WHEN I MESSED UP EARLIER i flashed a different rom build.....does this have any negative affect on the phone....my stock rom was a IR something but i flashed a GR or GH something....
Click to expand...
Click to collapse
No it doesn't. You're fine. The latest is android 2.3.3 with GRI40.
Sent from my Nexus S using Tapatalk

[ROM] Bonsai User Discussion

This post is only for discussing all issues regarding the use of the Bonsai roms. We can talk here about any version from 1.0.0 to x.x.x
Due to some political issues please do not post any links to the Bonsai website! This thread is just for us users and don't expect the developers of Bonsai to ever visit here.
One last thing >
nor

Yes this try to keep this thread open.
Sent From My Evo Killer!

So is there a way to get a 600mhz step in the kernal for bonsai 4.0 last i heard he was going t put it in back in 3.0.1 but still not there. Or is there an easy way to included it in the kernal page file or something that set cpu uses? Also is there a way to get the voodoo color fix or a tweak that works that will make the brightness lower at the lowest setting for 4.0 becase the brightness on this screen is way to brght at night time. I used to have a tweak like this in syndicate rom for 2.1 it was great. Any info would be great thanks guys.
Sent from my SPH-D700 using XDA App

I installed bonsai 4.0.0.1 and it flashed fine, then it tried to restart and got stuck at the samsung boot screen, would not go past that.
So I battery pulled and tried to install another rom (verion 4) and it had an error in CW installing,
Then I tried installing a rom I have used before (epic experience) and CW would not install that one either.
So I used Odin to go back to stock everything and then unlocked it and now I am on a stock rom rooted.
Why do you think it is hanging there? I am scared to flash again as I think it will do the same? But if the forum needs the exact error msg I will install it again as I really want to get this rom working.
Thanks,
Force

forcelite said:
I installed bonsai 4.0.0.1 and it flashed fine, then it tried to restart and got stuck at the samsung boot screen, would not go past that.
So I battery pulled and tried to install another rom (verion 4) and it had an error in CW installing,
Then I tried installing a rom I have used before (epic experience) and CW would not install that one either.
So I used Odin to go back to stock everything and then unlocked it and now I am on a stock rom rooted.
Why do you think it is hanging there? I am scared to flash again as I think it will do the same? But if the forum needs the exact error msg I will install it again as I really want to get this rom working.
Thanks,
Force
Click to expand...
Click to collapse
Were you using CWM 3.0.0.6 or 3.0.0.5 ?
Sent from my SPH-D700 using Tapatalk

Good question as i was just going to as a question about EXT4 and CW.
The rom manger is version 3.0.1.4
however the CW mod flashed is version 3.0.2.4
It only has 2 to choose from in rom manger, 3.0.2.4 or an older 3.0.1.4
Not sure were people are getting these other versions from.
Force
PS I booted into CW and saw it was v2.5.1.0
am I way off?

abrcrmdl23 said:
So is there a way to get a 600mhz step in the kernal for bonsai 4.0 last i heard he was going t put it in back in 3.0.1 but still not there. Or is there an easy way to included it in the kernal page file or something that set cpu uses? Also is there a way to get the voodoo color fix or a tweak that works that will make the brightness lower at the lowest setting for 4.0 becase the brightness on this screen is way to brght at night time. I used to have a tweak like this in syndicate rom for 2.1 it was great. Any info would be great thanks guys.
Click to expand...
Click to collapse
I can't remember what stepping is on the kernel as we have been beta testing 4.0.1 and have been mainly dealing with a new setCPU governor called interactive. Were also still working on the other governor called smartass as well. I think that the stepping goes directly from 400 to 800, but we are always looking to go faster and with better battery life. I'll bug Randy and Mammon about it.
The sound will be Voodoo version 7, but I don't think the Voodoo color fix is going to make it into 4.0.1. Sorry, but we can't do everything...at least not all at the same time.

forcelite said:
I installed bonsai 4.0.0.1 and it flashed fine, then it tried to restart and got stuck at the samsung boot screen, would not go past that.
So I battery pulled and tried to install another rom (verion 4) and it had an error in CW installing,
Then I tried installing a rom I have used before (epic experience) and CW would not install that one either.
So I used Odin to go back to stock everything and then unlocked it and now I am on a stock rom rooted.
Why do you think it is hanging there? I am scared to flash again as I think it will do the same? But if the forum needs the exact error msg I will install it again as I really want to get this rom working.
Thanks,
Force
Click to expand...
Click to collapse
Did I see a similar post on the Bonsai website earlier today? I just want to verify that you were using CWM 3.0.0.6 as anything else will cause problems like that. Also when you get to these kinds of problems you should attempt a second flash of Bonsai before going to the trouble of a ODIN job. A second flash seems to fix a whole variety of odd kind of problems.
As you can imagine with all the beta testing I do I'm always finding ways to corrupt my phone. Some days I have managed to bork it 3-5 times.
I decided to test out today a 4.0.1 install directly from DI18 > CWM 3.0.0.6 > Bonsai 4.0.1 full rom. It went great with no problems at all and running just fine, so far

I think that is my problem, I am using a the CW that came with the one click unroot.
So I guess I need to do this, even if I am already rooted?
http://forum.xda-developers.com/showthread.php?t=897612&highlight=EXT4
PS
I booted into CW and saw it was v2.5.1.0

bluetooth
I could not get bonsai 3.0.1 or 4.0.0 to pair with my bluetooth headset. Tried pairing on an epic with acs 1.1 and paired fine. Anyone else have a pairing problem?

forcelite said:
Good question as i was just going to as a question about EXT4 and CW.
The rom manger is version 3.0.1.4
however the CW mod flashed is version 3.0.2.4
It only has 2 to choose from in rom manger, 3.0.2.4 or an older 3.0.1.4
Not sure were people are getting these other versions from.
Force
PS I booted into CW and saw it was v2.5.1.0
am I way off?
Click to expand...
Click to collapse
Do not use Rom Manager to be installing the beta CWM files. The correct way is with one of the 1 step CWM tools in the development forum. 3.0.2.4 is half-finished and is very difficult even to navigate through the various menu's. I know this because I tried out that CWM version for some grins one day. It will majorly screw your Epic if your not extremely careful. When DI18 was prevalent Rom Manager worked great to root your phone. When we started the move into the Froyo roms Rom Manager quit working and that is why the 1 click then became more prevalent.
Just follow the directions posted all over the place and Bonsai will install just fine and you will be a happy camper.

I am installing it now after updating to CW3 (from CW2.5) . I think it will come out fine now, I am an idiot and didn't realize the original one click root installed an older version of CW.
Thx All,
Force

forcelite said:
I think that is my problem, I am using a the CW that came with the one click unroot.
So I guess I need to do this, even if I am already rooted?
http://forum.xda-developers.com/showthread.php?t=897612&highlight=EXT4
PS
I booted into CW and saw it was v2.5.1.0
Click to expand...
Click to collapse
The linked one is the correct one for Bonsai version 4.x.x.

olddocwhite said:
I could not get bonsai 3.0.1 or 4.0.0 to pair with my bluetooth headset. Tried pairing on an epic with acs 1.1 and paired fine. Anyone else have a pairing problem?
Click to expand...
Click to collapse
Some people do and some don't I do know that Randy has instituted quite a few bluetooth linux upgrades into 4.0.1 rom. Some people are able to clear the data, but the problem usually reappears. Mattalica76 has the link to a more permanent fix to this problem, give him a PM.

Duplicate... Sorry

forcelite said:
I am installing it now after updating to CW3 (from CW2.5) . I think it will come out fine now, I am an idiot and didn't realize the original one click root installed an older version of CW.
Click to expand...
Click to collapse
Don't beat yourself up as we all have been there. It's a process of learning new skills and a new language. Give yourself a pat on the back for getting through this when 98% of the world would have said screw it or not even tried at all.

Actually it didnt boot this time either, it installed the firs ttime fine, then kept booting after samsung in a loop,
So I went into CW3 and tried to flash bonsai 4.0.01 again and it gave me this error. It is long, however I shortened it, I have the whole error photo copied)
Finding package
Opening package
Install update
Assert failed getprop (“ro.product.device)”)
Sph-700
E:error in /SDcard/bonsai……….
(status 7)
Installation aborted

Top Nurse said:
Don't beat yourself up as we all have been there. It's a process of learning new skills and a new language. Give yourself a pat on the back for getting through this when 98% of the world would have said screw it or not even tried at all.
Click to expand...
Click to collapse
Thanks for the support T Nurse,
I loaded the EC05 stock from Odin as I still dont have a grasp on EXT4 file system.
last thing I tried was cw3.0.0.6 and loaded Bonsai and it installed, just hung at samsung screen. might be a corrupt rom file.
1) So after flashing CW3, bonsai is supposed to change the file system over to EXT4 automatically after flashing, correct?
2) will windows 7 be able to read the sd card after it is changed over to ext4 (by bonsai), or will it have 2 partitions, one windows can read fat32 and the other ext4 it cant.

forcelite said:
Thanks for the support T Nurse,
I loaded the EC05 stock from Odin as I still dont have a grasp on EXT4 file system.
last thing I tried was cw3.0.0.6 and loaded Bonsai and it installed, just hung at samsung screen. might be a corrupt rom file.
1) So after flashing CW3, bonsai is supposed to change the file system over to EXT4 automatically after flashing, correct?
2) will windows 7 be able to read the sd card after it is changed over to ext4 (by bonsai), or will it have 2 partitions, one windows can read fat32 and the other ext4 it cant.
Click to expand...
Click to collapse
CWM3 will convert your filesystem to ext4 the first time you boot into it. It won't touch the sdcard so that won't be converted. After CWM is finished with the conversion, do not reboot the phone, you will then flash Bonsai.

forcelite said:
Thanks for the support T Nurse,
I loaded the EC05 stock from Odin as I still dont have a grasp on EXT4 file system.
last thing I tried was cw3.0.0.6 and loaded Bonsai and it installed, just hung at samsung screen. might be a corrupt rom file.
1) So after flashing CW3, bonsai is supposed to change the file system over to EXT4 automatically after flashing, correct?
2) will windows 7 be able to read the sd card after it is changed over to ext4 (by bonsai), or will it have 2 partitions, one windows can read fat32 and the other ext4 it cant.
Click to expand...
Click to collapse
After flashing the boot script of cwm 3.0.0.6 you then have to power off. Then hold down the camera button, vol down, and power keys at the same time and the EXT4 script will automatically start to format your system. Please keep in mind that it is not formatting the SD card, but only the read only memory of the phone.
After you finished a few beers it will be done and will drop you back to cwm. Do not reboot, but flash bonsai. After bonsai is finished then reboot.
Sent from Bonsai 7.0.3

help(resolved)

Hey I just seriously screwed my self over bassicly I tried to get miui to boot from the samsung fascinate however when I installed it in cmr it spassed out then powered of then went to the bootloader and I get a red error message saying can't mount data or something so then I tried to reinstall Eco 3 Odin using Odin and it worked it booted but it says I have zero data on my phone and I can't install anything. I also tried the oneclick soft unbricker but it fails saying adb divers are not installed when they are. I'm doing this on my phones browser witch is the only thing that seems to be working right now I also tried a band restore but I got the same data error message.

Have you tried restoring to DL17 and then re-upgrading to 2.2?

And how about a good old odin flash?
In worst case, I would ask imnuts for the full odin package, or use a fascinate full odin package to get you off your feet, then reflash the modem, and recovery, then wipe In recovery cyan cwm... Then flash ec03
Sent from my SCH-I400 using XDA Premium App

wait wait, is this on a Continuum or Fascinate?

Nuckin said:
wait wait, is this on a Continuum or Fascinate?
Click to expand...
Click to collapse
He is on a Continuum, but you can use a fascinate Odin package to reformat partitions if they get messed up, then just reflash recovery and start fresh if you can get in then... That wasn't a really good thing though to suggest to a newcomer necessarily, so thank you for pointing that out

okay heres what happened firts i wanted to see if i could get the miui rom for the samsung fascinate to boot on the continuum there pretty much the same phone minus the ticker and screen size so i went into clockwork mod and wiped everything then went to install zip from sd card and clicked on the miui rom witch was the process we always used on the hero. then after i clicked on it, it started to install then my screen started shacking and my phone turned off. when i turned it back on it when to the bootloader and a red error message poped up saying
e:cant mount /dev/blockstill(invalid argument
and when i go to recovery it says the same thing when i try to wipe/restore nand it says the same thing. so at that point i powered off and went to download mode and reinstalled eco3 odin using pda mode on odin and it worked then it rebooted and i got to the set up screen and i got 2 force closes daily brefeing and something else i went ahead and skipped all that stuff and it loaded fine after that. however now for some reason it says i have zero system memory so i cant install any apps or save data however it does recognize my sd card but i cant install to sd card. so bassicly the phone functions just no internal memory. at this point i honestly dont know what to do everything on the hero was simple and straight forward and we never ran into these kind of problems. ive also tried to restore my nands and reinstall clockwork mod but still no dice. what i need to do now i guess is get the necessary files to go completely stock and see if that helps. and if someone could point me in the direction to those files i would really aprechiate it. oh and i tried the one click unbricker it sayed success but didnt really do anything.
oh and i know trying to install miui was stupid but i was just wanting to see if it would boot lol.

Download the PIT file in the Development forum, as well as the DL17 Odin package from the FAQ of the EC03 post I made. Flash the DL17 in PDA, with the PIT, and re-partition selected. After that, you should be back on DL17, and can do whatever you want from there.

huzzza!!!
thank god that worked thank yall so much i still cant believe that just happened but restoring the stock odin image worked and all is well. so i guess tommorow i can reroot and restore my nand.
once again thank yall for the help.

s4 stuck on reboot

I'm running an S4 and have this very weird issue where after installing a custom rom, the phone would reboot and load the rom successfully, but if I ever reboot it, it never wants to go past the Samsung logo.
If I try entering TWRP and fixing permissions or factory reset, it just comes up with errors and fails. The only way around it is to format data, then reflash the rom.
But now I have a nandroid backup so everytime I reboot, I basically have to reflash the rom.. It's happened on at least 2 roms!
I've used the search function on the forums and found a thread was inconclusive so I've made this thread.
Thanks in advance
(This is my first Android phone too, so I'm not 100% familiar with all the different software and techniques, but I can definitely learn!)

Try flashing the ROM with the latest stock CWM. TWRP can cause issues.

Kesh09 said:
I'm running an S4 and have this very weird issue where after installing a custom rom, the phone would reboot and load the rom successfully, but if I ever reboot it, it never wants to go past the Samsung logo.
If I try entering TWRP and fixing permissions or factory reset, it just comes up with errors and fails. The only way around it is to format data, then reflash the rom.
But now I have a nandroid backup so everytime I reboot, I basically have to reflash the rom.. It's happened on at least 2 roms!
I've used the search function on the forums and found a thread was inconclusive so I've made this thread.
Thanks in advance
(This is my first Android phone too, so I'm not 100% familiar with all the different software and techniques, but I can definitely learn!)
Click to expand...
Click to collapse
go into the wipe options on twrp - go to advanced and select - cache, dalvik, system, data - swipe
then do a normal full wipe
reflash the chosen rom
power off rather than reboot
then power up
something gets fracked with the wipes somewhere and thats how i fixed it.
either that or flash philz recovery through odin and do a "new rom" wipe

Gotcher said:
Try flashing the ROM with the latest stock CWM. TWRP can cause issues.
Click to expand...
Click to collapse
For some reason, whenever I install CWM, it keeps getting stuck at "recovery booting" and once in maybe 30 times it works, haven't got it to work in a while.. Not sure what's happening, but if I flash TWRP again, it boots up fine. Am I doing anything wrong? Using Philz touch..
scottyf79 said:
go into the wipe options on twrp - go to advanced and select - cache, dalvik, system, data - swipe
then do a normal full wipe
reflash the chosen rom
power off rather than reboot
then power up
something gets fracked with the wipes somewhere and thats how i fixed it.
either that or flash philz recovery through odin and do a "new rom" wipe
Click to expand...
Click to collapse
This hasn't worked for me, and yeah, I can't seem to get CWM to like my phone..

Kesh09 said:
For some reason, whenever I install CWM, it keeps getting stuck at "recovery booting" and once in maybe 30 times it works, haven't got it to work in a while.. Not sure what's happening, but if I flash TWRP again, it boots up fine. Am I doing anything wrong? Using Philz touch..
This hasn't worked for me, and yeah, I can't seem to get CWM to like my phone..
Click to expand...
Click to collapse
try flashing the rom twice in succession. it will stick eventually but its just getting the right combo. these S4's are a right pain in the ass just now.
also another option would be downloading a rom with Aroma installer onto a micro sd and see if that gets you out of the problem. ive found on other devices ive had that a rom with Aroma can sometimes get you moving (id suggest Omega rom as a good solid base)

scottyf79 said:
try flashing the rom twice in succession. it will stick eventually but its just getting the right combo. these S4's are a right pain in the ass just now.
also another option would be downloading a rom with Aroma installer onto a micro sd and see if that gets you out of the problem. ive found on other devices ive had that a rom with Aroma can sometimes get you moving (id suggest Omega rom as a good solid base)
Click to expand...
Click to collapse
The rom I'm flashing (twice) now is Omega actually!
I'll see how this goes! Hoping it's okay!

..
try to install another rom clean & stable and do full wipe or trust me the best to turn the phone to default firmware.

Kesh09 said:
The rom I'm flashing (twice) now is Omega actually!
So are you suggesting I install Omega, get it run, then install Aroma installer and reinstall it?
Click to expand...
Click to collapse
no i just meant flash the rom twice IF it didnt have Aroma.
try GoldenEye rom from micro sd (obviously downloaded and placed on the card through a pc and put back in the phone).
Or as above - you might have to start from scratch and use Odin to revert back to stock and re-root etc again.
Although i said Aroma sometimes helps, being honest it was a rom with Aroma that started causing me a similar issue in the first place (Not Omega or Foxhound though)

No luck guys... I think I'd rather start from a stock rom too. When I created my stock rom backup, it was through nandroid and an CWM format, but CWM did work, it froze when it was checking for MD5 or something...
But now I'm trying to find the right firmware for my phone, is there any thing I need to look out for? Gt-i9505 from Australia?
http://forum.xda-developers.com/showthread.php?t=2265477
In that thread, there's two of them, I'm downloading the one closest to when I bought it which was June