HI there. First i want to excuse for my bad english.
So, right into the question. Week ago i tried to flash CM9 on my moto defy. I flashed it, it ran well, when suddenly, after 2-3 days the trebuchet luncher crashed. I reboot my phone and all i got is boot loop. So, i'm a noob , but i tried to fix the problem whit installing one of the SBF's for moto defy+ (didn't notice that, the sbf is for Defy+ not for Defy). Actually the rom ran great, but the camera don't work. So i have a NANDROID backup but the moto defy original recovery, doesn't flash it (it says: "E: failed to verify whole-file signature"). I can't instal clockworkmod, couse i can't root the rom. So, the question is: is there any chance to root my rom and instal clockworkmod or can i fix the original recovery error, so i can apply my backup and downgrade to 2.2 froyo.
The rom that i flashed is ->
4.5.1-134-DFP-231 - retail, vodafon, tmobile, O2, full Blur
I tried to flash other SBF's but they dont work, or can't root either.
I tried to root the rom with everyone possible root exploits posted in this forum... but they doesen't work. I noticed that, there are some SBF's wich are rootable, but the download links doesen't work.
So, what is the exit of this ****ty situation?
no way out
No way at all???
wait for a miracle.
meanwhile read this :
http://forum.xda-developers.com/showthread.php?t=1542956
DFP-188, DFP-231, DFP-2311 BL7 Root
novaproject said:
HI there. First i want to excuse for my bad english.
So, right into the question. Week ago i tried to flash CM9 on my moto defy. I flashed it, it ran well, when suddenly, after 2-3 days the trebuchet luncher crashed. I reboot my phone and all i got is boot loop. So, i'm a noob , but i tried to fix the problem whit installing one of the SBF's for moto defy+ (didn't notice that, the sbf is for Defy+ not for Defy). Actually the rom ran great, but the camera don't work. So i have a NANDROID backup but the moto defy original recovery, doesn't flash it (it says: "E: failed to verify whole-file signature"). I can't instal clockworkmod, couse i can't root the rom. So, the question is: is there any chance to root my rom and instal clockworkmod or can i fix the original recovery error, so i can apply my backup and downgrade to 2.2 froyo.
The rom that i flashed is ->
4.5.1-134-DFP-231 - retail, vodafon, tmobile, O2, full Blur
I tried to flash other SBF's but they dont work, or can't root either.
I tried to root the rom with everyone possible root exploits posted in this forum... but they doesen't work. I noticed that, there are some SBF's wich are rootable, but the download links doesen't work.
So, what is the exit of this ****ty situation?
Click to expand...
Click to collapse
Okay dude. First thing:
Calm down. If you already are then read on!
Since Defy and Defy+ are more than 90% similar in hardware flashing SBF should not be a problem until you don't want downgradability! So from the name of the SBF I guess its for 2.3.6(GB) So now no way can you downgrade to Froyo kernel or for that matter any ROM using Froyo kernel. Am not sure about your ROM but I use the Asia retail SBF (4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage) and I have rooted it using latest superoneclick and modded, rooted and installed CWM recovery umpteen times! So, what you can do is:
1.) Find out version of Android(2.3.4 or 2.3.6) in your phone at present.
2.) Case a:If it is 2.3.4: You can get any kernel and downgradeability is
preserved. There should be no prob faced!
Case b: If you have 2.3.6: You should try the SBF I have since it is rootable.
3.) Now I presume your phone should be working fine with Android 2.3.6.
Let me know if it works and than we can proceed further..
You can also give a try with Walter's fixed SBF and Nandroid backup
PS: A Defy as I understand is almost impossible to Brick!!! Y? Since its bootloader is locked
HI there, thx for the help
Yes, the installed rom is 2.3.6. I want to change it, couse the battery drain too fast (one day and it's gone) and there's no camera.
I flashed the rom that you said me (4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage), but it's not working.. Doesn't boot at all. After the rom is flashed, the phone reboot and nothing, black screen. Only the white LED light on the upper left corner is activated. I'm giving a try with Walter's fixed SBF now.
Walter's fixed SBF doesen't work too. Same blackscreen...
novaproject said:
Walter's fixed SBF doesen't work too. Same blackscreen...
Click to expand...
Click to collapse
Oh! I think similar thing happened with me once when I installed CM9 kernel! This is what I did:
1.) Flash SBF. (Full)
2.) Boot to stock android recovery.
3.) Wipe data and wipe cache.
4.) Reboot.
Well since you already installed a full SBF of 2.3.6 you cannot downgrade! And from what I have seen till now from users experience(and mine) 2.3.6 gives much better battery life. So from now on whenever u use a nightly or ROM use the one for GB(Defy+) builds
This means, that i cannot change the rom anymore?
novaproject said:
This means, that i cannot change the rom anymore?
Click to expand...
Click to collapse
You can change ROMs. But you can't go back to an old or downgraded ROM(like froyo). That means you will always have to use ROMs made for Defy+ (GB). There are many CM7 nightlies by Quarx for Defy+ and the latest one for me worked great.
However, should you want to go to Froyo again there is a workaround:
A chinese sbf of froyo was found to have an updated bootloader! So the workaround is:
1.) Flash the chinese SBF(Never use the flash as it will burn your flash)
2.) Root, install 2nd init and CWM.
3.) Now you can flash CM and ROMs for Defy(Froyo) since you got a froyo
kernel(And use your flash now )
This is something I gave a try and it worked for me. I am sorry don't remember which thread it was with this tutorial. May be you can give it a search...
Thanx again.
I tried the chineese sbf but it didn't work. Same black screen...
Is there any way to instal .zip rom (like CM7) with program like RSD lite?
novaproject said:
Thanx again.
I tried the chineese sbf but it didn't work. Same black screen...
Is there any way to instal .zip rom (like CM7) with program like RSD lite?
Click to expand...
Click to collapse
Did you do a data wipe from stock recovery after installing the chinese SBF?
I dint quite get your second question! If you asked :
a.) Can zip be flashed using RSD lite.. No!! You cant. RSD lite understand only proper SBF files with correct checksum!
b.) Can zip be installed from stock recovery: No!! To instal a zip from stock you need the zip to be signed by motorola. That is why the whole concept of 2nd init comes up! It is a recovery menu which comes before the system boots up
It was the first question
Yes, i did the data wipe, and nothing... I think, no other SBF works except mine... I don't know what to do now.
novaproject said:
It was the first question
Yes, i did the data wipe, and nothing... I think, no other SBF works except mine... I don't know what to do now.
Click to expand...
Click to collapse
Sorry dint see that! I am afraid i think the SBF you flashed has BL7 as someone in the thread mentioned earlier! just to be sure:
1.) Download this .
2.) Extract the sbf and check the cmg versions. Check the version for cmg39.
3.) If it is 7. I am afraid there is no way out yet!! For the time being you are stuck with that SBF!! You are unable to boot because the SBF I gave you and most others has BL6 !!
Sorry again as I dint thought of this possibility earlier! And don't worry much. For now reflash the SBF that is working for you and wait till a way to root it is found!!
And speaking of it I welcome myself to the group!!
Just got back my Defy+ from service center and after I switched it ON I saw the lockscreen interface was different! A quick check told me that it is the latest SBF they flashed. I kept my fingers crossed. Once back home I checked and found this phone is not rootable!!! Now I am stuck too!!
Wooow, they flashed you BL7??
OK, man, im gonna donate you one AK47!
novaproject said:
Wooow, they flashed you BL7??
OK, man, im gonna donate you one AK47!
Click to expand...
Click to collapse
Oh that is so very nice of u!!!!
Sent from my MB526 using XDA
Related
Mmy defy infos are:
Firmware: 2.2.2
Model: MB525
Build: JEM_3.4.3-36-1.1
Am I able to install CM7 ? and what are the steps/tips to install it ? I also want to be able to revert back to my stock in case i needed the warranty. thanks.
hey,man hmm, here what i did works for me so give it a try,btw there are lots of topic around this on xda you could easily look around!
1:download RSD LITE
2:download the SBF (stock one,i used stock froyo)
3.open rsd lite and find your sbf
4:hold volume key + or up and power on the phone
5:now it should be the first device on the list click that and push start
6: now you are done,go to reroot your device and install Clockwork MOD recovery can find it here (http://forum.xda-developers.com/showthread.php?t=875233)
7.download the cm7.1 and put it in root of your sd card
8.boot into recovery mode using clockworkmod then wipe/factory
9.select zip to be install,select the cm7
10. now your done after flashed!
this worked for me but if you have any problem you could ask,i will try my best xD
steps 1 & 2 confused me, why i should flash froyo if i already have it ?
then skip step 1 or 2 if you firmware is already stock
ok, but what about if i wanted to re-flash for warranty ?
Flashing from cm7 to stock froyo via sbf is a non-issue
i didnt find the sbf for my build version at the sbf list here
took me 10 seconds to find it! Seriously!
http://forum.xda-developers.com/showthread.php?t=1122210
read the build#.... it is JEM_3.4.3-36-1.1
iam still a newbie, sorry!
LOL... I hope my post didn't sound rude! I promise it wasn't my intent. I try to help as much as my knowledge allows! Sometimes we all just wish peeps would browse around a little. But I understand it can be overwhelming at times! and HEY we all start out as noobs right!
nah, np
I'm trying to get to the latest version from the old RC1v2.
I believe i need to install 7.1.1.1 stable, as it has all the kernel etc, then jump to the latest nightly from there?
I installed 7.1.1.1 stable, got the dreaded boot loop, removed battery, rebooted, then installed 111121 hopefully thats right, seems ok at the moment.
picked up the dreaded overnight abttery drain again, so trying out 111123 now
7.1 stable is fine
a
.................................
ive tried to install the Argen2Stone 2.7RE on my milestone 2 UK retail running on stock GB 2.3.4!
the funny thing is it always end up on black screen after i restore the argen2stone nandroid and applying the FixedSBF before rebooting my MS2.. i cant access the recovery because after the red motorola logo its already black screen.
Did i do something wrong about it? in the thread of Argen2Stone it say its for any ROM so assuming it should work on UK GB stock!.. Hope anyone can help thanks!
Edit: Got it working using the fixed SBF provided by endless7 CM7.. the thing is the FixedSBF.zip provided in argen2stone is not compatible with UK GB 2.3.4 so after i installed the argen2stone 2.7RE, reboot and gone on a black screen then flashed the fixedSBF using RSD lite then recovery, factory reset..
try entering motorola recovery by holding x when powering on. If it will let you get that far, do factory reset from there an see how that goes. Also make sure you are trying to flash the right sbf, because even group users have to flash a fixed sbf. So you didn't recesarily flash the right one just cause you flashed one
I cant be screwed to find the direct link now as I‘m on my tablet, so please refer to my guide here: http://forum.xda-developers.com/showthread.php?t=1464507
Around halfway down you will find a section titled install instructions (gingerbread users). There I have the correct link for the fixed sbf you need (this one needs to be flashed with rsd lite btw)
Edit: now that I think about it, your mistake was flashing the fixed sbf. All it does is chanew your kernel, and you were already on the one you needed. So flashing the sbf changed it to a kernel no longer compatible with your phone since you updated to 2.3.6 (non downgradable).
Flashing the sbf I'm referring to earlier should fix you up
DreadPirateDan said:
try entering motorola recovery by holding x when powering on. If it will let you get that far, do factory reset from there an see how that goes. Also make sure you are trying to flash the right sbf, because even group users have to flash a fixed sbf. So you didn't recesarily flash the right one just cause you flashed one
I cant be screwed to find the direct link now as I‘m on my tablet, so please refer to my guide here: http://forum.xda-developers.com/showthread.php?t=1464507
Around halfway down you will find a section titled install instructions (gingerbread users). There I have the correct link for the fixed sbf you need (this one needs to be flashed with rsd lite btw)
Edit: now that I think about it, your mistake was flashing the fixed sbf. All it does is chanew your kernel, and you were already on the one you needed. So flashing the sbf changed it to a kernel no longer compatible with your phone since you updated to 2.3.6 (non downgradable).
Flashing the sbf I'm referring to earlier should fix you up
Click to expand...
Click to collapse
thanks for the reply.. well even the stock recovery is not accessible the option i did was reflash all over again.. thankfully i got it working using fixedSBF from endless7 CM7.
Edit: revert back to stock GB rom.. this rom eats up too much RAM >.<...
in stock rom i can manage a 220mb free ram on standby but this rom when on standby for too long manage 175-185mb free rom.. maybe ill try CM9 next!
hi guys, someone could use the FMRadio??
americogiovani said:
hi guys, someone could use the FMRadio??
Click to expand...
Click to collapse
Unfortunately, it's not possible to use the FM radio in our Milestone 2, no matter with which app and rom.
I would like to get some knowledge on how clean are installs of full sbfs.
Just to explain: I am one of those who cannot flash (bootloops) last CM10 by Quarx (24/09 build). As I'm too eager to wait for next builds to check I was trying many ways to start and come to flashing point (and no work-around till now).
To explain those out of thread - there are some people who have exactly the same problem. Furthermore after flashing am build with bootloops as a result, I can immediately go to CWM and flash any other build and it works.
As my defy is BL5 now, I tried to flash different full BL5 sbfs.
My question in subject arised in the situation as follow:
- flashed full sbf DFHKT_U_4.5.2-109_DHT-22 which shall be easily rooted by SuperOneClick 2.3.1 - no chance to root, tried several times, flashed sbf again with the same result - why????
-immediately after that I flashed full sbf JORDN_U3_97.21.51 and tried to root - and it turned out that it's already rooted - why???.
Tried 3 times with the same result. When flashed it in the past (the same file on my lap) always had to root it with psneuter exploit.
Each flash above was finished with full wipe from stock recovery.
But it seems that flashing sbfs changed somehow phone's state - something is left.
Have I forgotten to do something or it is normal that even flashing full sbf is not totally clean?
corrinti said:
I would like to get some knowledge on how clean are installs of full sbfs.
Just to explain: I am one of those who cannot flash (bootloops) last CM10 by Quarx (24/09 build). As I'm too eager to wait for next builds to check I was trying many ways to start and come to flashing point (and no work-around till now).
To explain those out of thread - there are some people who have exactly the same problem. Furthermore after flashing am build with bootloops as a result, I can immediately go to CWM and flash any other build and it works.
As my defy is BL5 now, I tried to flash different full BL5 sbfs.
My question in subject arised in the situation as follow:
- flashed full sbf DFHKT_U_4.5.2-109_DHT-22 which shall be easily rooted by SuperOneClick 2.3.1 - no chance to root, tried several times, flashed sbf again with the same result - why????
-immediately after that I flashed full sbf JORDN_U3_97.21.51 and tried to root - and it turned out that it's already rooted - why???.
Tried 3 times with the same result. When flashed it in the past (the same file on my lap) always had to root it with psneuter exploit.
Each flash above was finished with full wipe from stock recovery.
But it seems that flashing sbfs changed somehow phone's state - something is left.
Have I forgotten to do something or it is normal that even flashing full sbf is not totally clean?
Click to expand...
Click to collapse
Yes, having the same problems rooting the DFHKT_U_4.5.2-109_DHT-22 sbf.
SuperOneClick doesn't work.
Does JORDN_U3_97.21.51 work? I have to try that.
droid_<3er said:
Yes, having the same problems rooting the DFHKT_U_4.5.2-109_DHT-22 sbf.
SuperOneClick doesn't work.
Does JORDN_U3_97.21.51 work? I have to try that.
Click to expand...
Click to collapse
Yes, but it's eclair. Usually I proceed acc. to meth.2 from OP of this thread, part Common Problems/Questions, to have CM7 with froyo which let me flash whatever I want.
Hi to you all.
I'll tell you my problem:
As the title express, i can't install any rom.
I had problems with calls with the CM10.2 in my phone, so i tried to put some other rom. I put the mokee os 43.
It worked, but the WiFi didn't. So i tried again, with other rom. I've got bootlop.
Then i've full flashed the phone (you know.. with the RSD lite) with a sbf from where i live (JORLA_U3_3.4.2_108-5_SIGNED (a rom from Argentina, with Personal Carrier)). The phone worked, but when i installed the Custom rom (CM10.1 i think) i had no-signal with my phone (installed and tried everything to manage the baseband issue). Tried another rom, bootloop again.
Well, long story short:
Now, i cant install any SBF from Argentina of the MB525, just an USA version of it, because otherwise it bricks my phone (no bootloop, just black screen, recognisable by RSD).
I can install, though, the Defy+ version of those roms, but each time that i try to flash it to a cm7, cm10,cm10.2 rom, my phone bricks again. Showing me an error( "Err:A5,70,00,00,23" and prompting to put the usb cable and start over),and getting stuck in the debug mode (the part where you install the sbf), and can't get through that,
As you can tell, i've got serious trouble. I would love to start from scratch, but my phone is getting rebelious.
I've read in other forums, searching for the error above, and supossedly now my phone is no longer a defy, but a defy+, and i should install sbf's of THAT phone, but i've done it, and i still get the error each time i flash (superclick, 2ndinit,reboot, wipedata/cache/dalvik, cm7, gapps).
What should i do?.
Right now i'm in
DFL_U3_4.5.2_51-50_SIGNED_USADEFYB25RETLALA007.0R_STABLE45LADEFYRETLA_P008_A014_M001_HWp3_Service1FF.sbf
wainting for instructions. I'm tired already of blindly trying new sbf with no results. What do i do??
Spersico said:
Hi to you all.
I'll tell you my problem:
As the title express, i can't install any rom.
I had problems with calls with the CM10.2 in my phone, so i tried to put some other rom. I put the mokee os 43.
It worked, but the WiFi didn't. So i tried again, with other rom. I've got bootlop.
Then i've full flashed the phone (you know.. with the RSD lite) with a sbf from where i live (JORLA_U3_3.4.2_108-5_SIGNED (a rom from Argentina, with Personal Carrier)). The phone worked, but when i installed the Custom rom (CM10.1 i think) i had no-signal with my phone (installed and tried everything to manage the baseband issue). Tried another rom, bootloop again.
Well, long story short:
Now, i cant install any SBF from Argentina of the MB525, just an USA version of it, because otherwise it bricks my phone (no bootloop, just black screen, recognisable by RSD).
I can install, though, the Defy+ version of those roms, but each time that i try to flash it to a cm7, cm10,cm10.2 rom, my phone bricks again. Showing me an error( "Err:A5,70,00,00,23" and prompting to put the usb cable and start over),and getting stuck in the debug mode (the part where you install the sbf), and can't get through that,
As you can tell, i've got serious trouble. I would love to start from scratch, but my phone is getting rebelious.
I've read in other forums, searching for the error above, and supossedly now my phone is no longer a defy, but a defy+, and i should install sbf's of THAT phone, but i've done it, and i still get the error each time i flash (superclick, 2ndinit,reboot, wipedata/cache/dalvik, cm7, gapps).
What should i do?.
Right now i'm in
DFL_U3_4.5.2_51-50_SIGNED_USADEFYB25RETLALA007.0R_STABLE45LADEFYRETLA_P008_A014_M001_HWp3_Service1FF.sbf
wainting for instructions. I'm tired already of blindly trying new sbf with no results. What do i do??
Click to expand...
Click to collapse
Try the retail Taiwanese DFP-231.
Thanks!
hotdog125 said:
Try the retail Taiwanese DFP-231.
Click to expand...
Click to collapse
Thanks dude, i've made that, but i still have problems, it helped me a lot though, since that in a moment not even one rom of the defy plus worked, except this one.
I keep dealing with the issue, but using this guide, i think i might get to the point that i want (that is... everything except the stock rom).
http://forum.xda-developers.com/showthread.php?t=1889325
Thanks!
I made it!
hotdog125 said:
Try the retail Taiwanese DFP-231.
Click to expand...
Click to collapse
I made it. After using the guide linked before, i put cm10 in the phone, and worked.
I would've liked to install CM7, but at the moment, i've lost like 20/30 hs in making my phone work.
Right now, i just want to enjoy it!
After my problem with the roms. i had problems rooting the phone, 'cause the rooting method i used didn't worked anymore (superoneclick). I had to use the double-flash-method(from the link on top). After that, i installed 2ndInit and everything worked allright. Except CM7. I couldnt find a CM7 that didn't brick my phone. So... i'm stuck with CM10 (for now).. until 4.3 reach a certain level of maturity.
The problem is Solved - If Any Moderator sees this, can close the thread.
Spersico said:
I made it. After using the guide linked before, i put cm10 in the phone, and worked.
I would've liked to install CM7, but at the moment, i've lost like 20/30 hs in making my phone work.
Right now, i just want to enjoy it!
After my problem with the roms. i had problems rooting the phone, 'cause the rooting method i used didn't worked anymore (superoneclick). I had to use the double-flash-method(from the link on top). After that, i installed 2ndInit and everything worked allright. Except CM7. I couldnt find a CM7 that didn't brick my phone. So... i'm stuck with CM10 (for now).. until 4.3 reach a certain level of maturity.
The problem is Solved - If Any Moderator sees this, can close the thread.
Click to expand...
Click to collapse
You can use framaroot instead of using the double flash method. See the new CM7.2 by maniac in the dev thread. Try it.
Hi All,
I picked up a Defy MB525 on ebay, mostlly to mess with but I need to use it as my daily driver for a while because I am buying a house and my money is tied up for that.
Anyway, it arrived with stock unrooted t-mobile froyo which I am sure you will all agree is unacceptable so i used framroot to root it and installed sndinit 2.3 and followed the instructions in the general section for installing KitKat. I followed the instructions including the note to update the phone to CM10 first which went fine. At one point, I had it running CM10.1 fine but when I installed KitKat, the phone got stuck at the boot screen. The instructions say that it is normal for it to take a long time and you will think you are stuck but I let it sit more than an hour. At that point I thought I was soft bricked so I went back and used RSD Lite to install the t-mobile eclair SBF on it, which is the only one I can find. All links to the Froyo SBF I can find are broken.
That is where I am stuck. When I try to install sndinit, I get no blue light on reboot and on the older versions and I get an SD mount error in the recovery.
I think the probably I am having are related to not having the Froyo firmware installed but when I try to install it the regular way, the phone reboots and I get the triangle with an exclamation point. As I said, I can't find the Froyo SBF. The links I can find are broken and I don't think it is listed here, which is where I found the eclair sbf:
http://sbf.droid-developers.org/phone.php?device=27
My questions are:
Does anyone know where to find the most recent t-mobile sbf file? Do you think that is my problem? If not, what is?
richdaley said:
Hi All,
I picked up a Defy MB525 on ebay, mostlly to mess with but I need to use it as my daily driver for a while because I am buying a house and my money is tied up for that.
Anyway, it arrived with stock unrooted t-mobile froyo which I am sure you will all agree is unacceptable so i used framroot to root it and installed sndinit 2.3 and followed the instructions in the general section for installing KitKat. I followed the instructions including the note to update the phone to CM10 first which went fine. At one point, I had it running CM10.1 fine but when I installed KitKat, the phone got stuck at the boot screen. The instructions say that it is normal for it to take a long time and you will think you are stuck but I let it sit more than an hour. At that point I thought I was soft bricked so I went back and used RSD Lite to install the t-mobile eclair SBF on it, which is the only one I can find. All links to the Froyo SBF I can find are broken.
That is where I am stuck. When I try to install sndinit, I get no blue light on reboot and on the older versions and I get an SD mount error in the recovery.
I think the probably I am having are related to not having the Froyo firmware installed but when I try to install it the regular way, the phone reboots and I get the triangle with an exclamation point. As I said, I can't find the Froyo SBF. The links I can find are broken and I don't think it is listed here, which is where I found the eclair sbf:
http://sbf.droid-developers.org/phone.php?device=27
My questions are:
Does anyone know where to find the most recent t-mobile sbf file? Do you think that is my problem? If not, what is?
Click to expand...
Click to collapse
I figured this out if anybody needs to know. I had to do a full system reset then restore the eclair sbf so that the phone is in the exact state it was in out of the box. Then the OTA install worked fine. I am still working on getting KitKat installed. It seems like I need to find the right combination of recovery and rom to get 10.1 installed.
richdaley said:
I figured this out if anybody needs to know. I had to do a full system reset then restore the eclair sbf so that the phone is in the exact state it was in out of the box. Then the OTA install worked fine. I am still working on getting KitKat installed. It seems like I need to find the right combination of recovery and rom to get 10.1 installed.
Click to expand...
Click to collapse
To install KK, root, 2ndinit, then go to recovery and flash this and reboot - http://d-h.st/dWr. Then after reboot, go back to recovery (don't go back to the system). Then flash this - http://d-h.st/dz8 and immediately flash KK and gapps.
hotdog125 said:
To install KK, root, 2ndinit, then go to recovery and flash this and reboot - http://d-h.st/dWr. Then after reboot, go back to recovery (don't go back to the system). Then flash this - http://d-h.st/dz8 and immediately flash KK and gapps.
Click to expand...
Click to collapse
Beautiful. It worked perfectly.