Hey,
I bought the MLB At Bat 12 app, in order to watch games with my MLB.tv subscription.
The Note is in the compatible devices list, but I can't see the Video option.
Anyone has faced the same problem? Could it be that MLB only supports the AT&T version of the Note?
Thanks!
Edit:
MLB heard us and the International Note, AKA GT-N7000 is now a fully supported device.
Live games are working great.
Cheers!
crizolli said:
Hey,
I bought the MLB At Bat 12 app, in order to watch games with my MLB.tv subscription.
The Note is in the compatible devices list, but I can't see the Video option.
Anyone has faced the same problem? Could it be that MLB only supports the AT&T version of the Note?
Thanks!
Click to expand...
Click to collapse
There is no live feed during spring training, only radio.
Sent from my GT-N7000 using xda premium
You mean on the app?
'Cause they are streaming 150 Spring Training games. As a matter of fact, I'm watching a Red Sox game on my PS3 right now.
Yes on the app. On opening day the app will update and video will be available.
Sent from my GT-N7000 using xda premium
spring training videos are available on the streaming option. it works on my galaxy tab 10. however, I same facing the same problem on my note where there is no video icon to click on. I have already contacted MLB.TV. they say they will look into the problem and then get back to me. I suspect that the galaxy note they have on that list is the American version.
DMax99 said:
spring training videos are available on the streaming option. it works on my galaxy tab 10. however, I same facing the same problem on my note where there is no video icon to click on. I have already contacted MLB.TV. they say they will look into the problem and then get back to me. I suspect that the galaxy note they have on that list is the American version.
Click to expand...
Click to collapse
I have specifically read that you will not be able to watch on cellphones. I'll try to find it for you tomorrow.
Sent from my GT-N7000 using xda premium
I looked around and couldn't find anything saying that. I'll né gratefull if you could fid out querendo you saw that.
I've also contacted MLB suport, but they haven't answered back yet.
mlb on droid
I have a HTC Inspire which I had MLB At Bat 12 installed and it DOES offer games during spring training. I know because I was watching them up until I rooted the phone and installed a custom rom (RCmix), reinstalled mlb at bat 12 and now I do NOT have the video option.
MLB support has been a dead end. They don't even know what I'm talking about.
This is very frustrating, I was really hoping some games when not at home.
I'm having similar issues on both my Asus Transformer and Galaxy SII. Hopefully, as someone mentioned earlier, the video will be available on mobile devices on opening day.
mlb at bat/gummy rom issue
I have been watching spring training games on my paid subscription of mlb at bat on stock rom/rooted droid 4. Since I flashed gummy rom this morning, I get a video error message saying it cannot load the video. I can hear about 3 seconds of announcer audio although the screen is black and then i get the error.
Im assuming its a clash with gummy, but i was wondering if anyone else had this problem, or has a fix to make at bat gummy compatable.
Does at bat video streaming work with other custom roms?
thanks!
Anyone having any luck getting the video icon to show up on a tablet/phone?
nighthawk101 said:
Anyone having any luck getting the video icon to show up on a tablet/phone?
Click to expand...
Click to collapse
PLEASE PRESS THE THANK BUTTON IF THIS HELPS YOU!
YES!! I got this to work last year by editing the build.prop file to make my HTC HD2 running android look like a Nexus S. I even had fun with it so the market reports my phone as an HTC Nexus S.
I downloaded At Bat 12 in Feb. and the spoof still worked.
I just upgraded my phone to an HTC Sensation XE. he video icon was hidden on my new phone because it too is not officially supported.
I edited the build.prop on my new phone similarly and like magic, At Bat 12 shows the video icon now.
Here's how to do it:
0. Go to system settings->applications and clear data for At Bat 12
1. Using an app like Root Explorer, navigate to system->build.prop
2. Make sure you have r/w access and long press build.prop file to open in text editor
3. Scan build.prop file and make:
ro.product.model=Nexus S
(there may be 2 ro.product.model lines that need to be changed
ro.product.manufacturer=HTC
NOTE: These are the most important lines to change. If these don't work by themselves you can also make:
---OPTIONAL---
ro.product.brand=HTC_wwe
ro.product.name=yakjuxw
ro.product.device=maguro
4. Save build.prop file and open again to verify that changes were made. If your changes are not there, check that you are in r/w mode and repeat from step 1.
5. restart your phone, open At Bat 12 and reenter your account details.
Let me know if this helps you. If it does not, let the forum know and we can work out the kinks. This method works for sure... no exceptions.
For those of you who think MLB will somehow rescue your video capabilities on opening day..... IF YOU CAN'T STREAM VIDEO DURING SPRING TRAINING, YOU WILL NOT BE ABLE TO STREAM VIDEO ON OPENING DAY!! I highly recommend editing your build.prop.
blek42 said:
PLEASE PRESS THE THANK BUTTON IF THIS HELPS YOU!
YES!! I got this to work last year by editing the build.prop file to make my HTC HD2 running android look like a Nexus S. I even had fun with it so the market reports my phone as an HTC Nexus S.
I downloaded At Bat 12 in Feb. and the spoof still worked.
I just upgraded my phone to an HTC Sensation XE. he video icon was hidden on my new phone because it too is not officially supported.
I edited the build.prop on my new phone similarly and like magic, At Bat 12 shows the video icon now.
Here's how to do it:
0. Go to system settings->applications and clear data for At Bat 12
1. Using an app like Root Explorer, navigate to system->build.prop
2. Make sure you have r/w access and long press build.prop file to open in text editor
3. Scan build.prop file and make:
ro.product.model=Nexus S
(there may be 2 ro.product.model lines that need to be changed
ro.product.manufacturer=HTC
NOTE: These are the most important lines to change. If these don't work by themselves you can also make:
ro.product.brand=HTC_wwe
ro.product.name=yakjuxw
ro.product.device=maguro
4. Save build.prop file and open again to verify that changes were made. If your changes are not there, check that you are in r/w mode and repeat from step 1.
5. restart your phone, open At Bat 12 and reenter your account details.
Let me know if this helps you. If it does not, let the forum know and we can work out the kinks. This method works for sure... no exceptions.
For those of you who think MLB will somehow rescue your video capabilities on opening day..... IF YOU CAN'T STREAM VIDEO DURING SPRING TRAINING, YOU WILL NOT BE ABLE TO STREAM VIDEO ON OPENING DAY!! I highly recommend editing your build.prop.
Click to expand...
Click to collapse
Was having the same issue, until I found this thread - I haven't been able to test it because there are no games playing atm, however I now have the TV/Video icon
Strange issue has popped up...
For some weird reason, Exchange has stopped syncing after modifying my build.prop
I'm going to delete/add the account to see if this fixes my issue, but be weary for those looking for a workaround.
EDIT:
After removing the Exchange account and trying to re-add it, i get a FC. I reverted back to my original build.prop until someone can find a workaround for both - having exchange working + video on MLB.TV
jaypeezee said:
Strange issue has popped up...
For some weird reason, Exchange has stopped syncing after modifying my build.prop
I'm going to delete/add the account to see if this fixes my issue, but be weary for those looking for a workaround.
EDIT:
After removing the Exchange account and trying to re-add it, i get a FC. I reverted back to my original build.prop until someone can find a workaround for both - having exchange working + video on MLB.TV
Click to expand...
Click to collapse
Exactly what lines did you change from the original build.prop that caused the Exchange errors? The MLB spoof can be done with a single line change for the model ID. This spoof has been known to cause issue with a limited number of apps.
Last year, I know some people ket 2-build.props on their phone and shuttled them in and out of the system folder as needed.... this is not the most optimal solution, but can work.
Let us know if you find anymore out on the topic.
blek42 said:
PLEASE PRESS THE THANK BUTTON IF THIS HELPS YOU!
YES!! I got this to work last year by editing the build.prop file to make my HTC HD2 running android look like a Nexus S. I even had fun with it so the market reports my phone as an HTC Nexus S.
I downloaded At Bat 12 in Feb. and the spoof still worked.
I just upgraded my phone to an HTC Sensation XE. he video icon was hidden on my new phone because it too is not officially supported.
I edited the build.prop on my new phone similarly and like magic, At Bat 12 shows the video icon now.
Here's how to do it:
0. Go to system settings->applications and clear data for At Bat 12
1. Using an app like Root Explorer, navigate to system->build.prop
2. Make sure you have r/w access and long press build.prop file to open in text editor
3. Scan build.prop file and make:
ro.product.model=Nexus S
(there may be 2 ro.product.model lines that need to be changed
ro.product.manufacturer=HTC
NOTE: These are the most important lines to change. If these don't work by themselves you can also make:
---OPTIONAL---
ro.product.brand=HTC_wwe
ro.product.name=yakjuxw
ro.product.device=maguro
4. Save build.prop file and open again to verify that changes were made. If your changes are not there, check that you are in r/w mode and repeat from step 1.
5. restart your phone, open At Bat 12 and reenter your account details.
Let me know if this helps you. If it does not, let the forum know and we can work out the kinks. This method works for sure... no exceptions.
For those of you who think MLB will somehow rescue your video capabilities on opening day..... IF YOU CAN'T STREAM VIDEO DURING SPRING TRAINING, YOU WILL NOT BE ABLE TO STREAM VIDEO ON OPENING DAY!! I highly recommend editing your build.prop.
Click to expand...
Click to collapse
I'm on an international Samsung Galaxy S2 GT-I9100
I only changed ro.product.model from GT-I9100 to SGH-T989 and the TV icon is now available.
I'll test the streaming tonight.
actually, video won't load, circle just spins forever, and upon reboot, it reverts back and I can't get video..
---------- Post added at 12:08 PM ---------- Previous post was at 11:58 AM ----------
dag16 said:
can't get it to work with nook color. I did the full Nexus S, no luck. tried the build.prop settings for the Xoom (which is a supported tablet), no luck. even uninstalled and reinstalled mlb lite in case something wasn't erasing properly, but no luck.
Any suggestions?
NM: got it working!!
Thanks!!
Click to expand...
Click to collapse
****novic said:
I'm on an international Samsung Galaxy S2 GT-I9100
I only changed ro.product.model from GT-I9100 to SGH-T989 and the TV icon is now available.
I'll test the streaming tonight.
Click to expand...
Click to collapse
Using ro.product.model=SGH-T989 on the Galaxy S2 GT-I9100 works beautifully.
I can watch the Tigers - Rays game.
Good news, guys.
MLB heard us, and now the GT-7000N is a supported device.
Already watched a game from my Red Sox yesterday, picture quality is great over Wifi.
Thanks for everyone who contacted them and made this happen.
Related
Hi, the galaxy s has a beautiful screen and a powerful graphic card. It will be a waste if viewing video in normal or lower quality. However, when loading from youtube, the default video mode is normal quality, and it's quite troublesome to change the mode every time. Anyone knows the way to change the default to high quality?
Sent from my GT-I9000
download this youtube addon and install it on your phone.
it will enable a "HQ" button next to the play/pause buttons in the lower right corner of the display.
i think this also enables playing videos in HQ everytime you start playing a video, but I can't test this since I'm waiting for a replacement SGS.
regards
Wish program do you use to open this file "YouTubeHD.apk"? Can`t do it when i use winzip.
joffen87 said:
Wish program do you use to open this file "YouTubeHD.apk"? Can`t do it when i use winzip.
Click to expand...
Click to collapse
Copy the apk file to your phone and install it with Astro which can be found in the market.
thanks mate
ed10000 said:
Copy the apk file to your phone and install it with Astro which can be found in the market.
Click to expand...
Click to collapse
I downloaded Astro to my phone and whent online on this homepage on the phone and tried to open the file directly on my phone.. but it didn`t worked?
GalaxyFan88 said:
download this youtube addon and install it on your phone.
it will enable a "HQ" button next to the play/pause buttons in the lower right corner of the display.
i think this also enables playing videos in HQ everytime you start playing a video, but I can't test this since I'm waiting for a replacement SGS.
regards
Click to expand...
Click to collapse
From where did you get that file?
I tried it.. and now my youtube movies is awsome! thanks a lot
I tried it too, works as advertised!
Piny12 said:
From where did you get that file?
Click to expand...
Click to collapse
If you google youtubehd.apk you'll see a lot of results that suggest people are ripping the EVO 4G's youtube app and putting it on their phones. I'm not the original poster, but will assume that's where this is from before I hear otherwise.
I wish I'd thought of ripping the various apps off my EVO 4G before returning it to Sprint for a refund.
ed10000 said:
Copy the apk file to your phone and install it with Astro which can be found in the market.
Click to expand...
Click to collapse
That would be exactly what I did, and I thank you so much for posting this
Thank you for this.
It looks like an official app.
Why do not google update this like the other apps?
it doesn't work for me.. it won't let me open saying it's not an authorized app from market..or something
here :
YouTube v1.6.19e.apk woks great on my desire & Galaxy s
http://www.multiupload.com/JZHWNCX1UT
thanks for the reply, but i'm getting the same message.
when i try to launch the file using ASTRO, it says install blocked, and says for security reasons, its set to block installation of apps not sourced in market..
Go to settings then applications -then click unknown sources, should work after that
ahhh i dont see unknown sources.. whats happening!!
sorry to be a bother
Well there is the HD button and it's defaulted on HD in JP3 firmware.. That suggest it will be so in the future official release too.
ekhong87 said:
ahhh i dont see unknown sources.. whats happening!!
sorry to be a bother
Click to expand...
Click to collapse
What phone do you have? The Captivate has had that removed from it. You can still install with adb or a sideloader app, I believe.
Just updated the firmware - and still this is needed. Thank you again!
However, it seems to default to normal quality, when on 3g network. I wish I could force it to hd/hq all the time?
http://www.siriusxm.com/android/indexd.html
View attachment 403113
Awesome, love my XM.
Sent from my PC36100 using XDA App
Just tried it a bit. I'm on Fresh 3.2. It used to not even connect, just say "Aquiring Data Connection"
With this update it plays and doesn't loop, but it sure does jump and skip quite a bit. Guess it's a start....
Only Froyo ROM I've ever gotten SXM to work right on is CM6 - which I don't wanna go back to.
Nice thanks for the update. I guess signing up on their webpage for an update email was pointless.
dwertz said:
Nice thanks for the update. I guess signing up on their webpage for an update email was pointless.
Click to expand...
Click to collapse
Well thats how I found out they emailed me. Also make sure you dont have the stagefright fix since I am also running Fresh 3.2 and had to switch back to stock stagefright files in order for it to play properly.
1 hr running and no problems so far... Thanks XM
playya said:
Well thats how I found out they emailed me. Also make sure you dont have the stagefright fix since I am also running Fresh 3.2 and had to switch back to stock stagefright files in order for it to play properly.
1 hr running and no problems so far... Thanks XM
Click to expand...
Click to collapse
Please tell me what you did to stagefright. I know Flipz made some changes to it but I don't know how to undo them. In my build.prop the player is enabled and it still skips a lot.
Thanks!!
I am using Fresh 3.2 and the new SiriusXM app is working fine for me. I'd say about 3 skips every hour or so. I actually only use this for Bloomberg and CNBC - I much prefer slacker and pandora for music, so a couple of skips is no big deal for me.
What I desperately can't figure out is how to record a live stream off the sound card (for lack of a better term). All recording apps seem to use the microphone only. Any ideas so that I can listen to specific CNBC shows like Kudlow on my ride home?
fchipm said:
Please tell me what you did to stagefright. I know Flipz made some changes to it but I don't know how to undo them. In my build.prop the player is enabled and it still skips a lot.
Thanks!!
Click to expand...
Click to collapse
Just extract the stagefright files from your original rar file and then ad push or copy and paste with Root explorer into the system/lib folder overwriting the files that are there now
Then replace the build.prop with the one from your original rom rar file as well.
I WIll try and attached them here for you.... what rom are you running
tnnm said:
I am using Fresh 3.2 and the new SiriusXM app is working fine for me. I'd say about 3 skips every hour or so. I actually only use this for Bloomberg and CNBC - I much prefer slacker and pandora for music, so a couple of skips is no big deal for me.
What I desperately can't figure out is how to record a live stream off the sound card (for lack of a better term). All recording apps seem to use the microphone only. Any ideas so that I can listen to specific CNBC shows like Kudlow on my ride home?
Click to expand...
Click to collapse
I am on the same rom and 0 skips at all....
playya said:
I am on the same rom and 0 skips at all....
Click to expand...
Click to collapse
Actually, after a reboot, I'm finding no skips at all as well.
Hate to bump this thread up again, but seemed like the best place to post rather than making a new thread.
Is anybody having issues with SXM 1.1 and connecting in the past couple of days? Its worked flawlessly for me since the update, and I've been happy with it again. However, now, on startup, the application hangs on "Checking for Updates".
Tried clearing data, uninstall/reinstall, and hard reset fresh install. All no dice.
Anybody else having issues?
Is this of value to anyone?
http://www.multiupload.com/NPZ062QIZB
Netflix is not supported on this device. Please check the Netflix website for a list of supported devices.
krymzon40 said:
Netflix is not supported on this device. Please check the Netflix website for a list of supported devices.
Click to expand...
Click to collapse
That sucks. But I was more interested in using a .prop file that pretends to be a Nexus One and would then allow the app to work. Some folks around here are pretty bright.
Does anyone know if this works on ED12?
Seems to work on the Captivate with Gingerbread:
http://forum.xda-developers.com/showthread.php?p=13730833#post13730833
tbob18 said:
Does anyone know if this works on ED12?
Seems to work on the Captivate with Gingerbread:
http://forum.xda-developers.com/showthread.php?p=13730833#post13730833
Click to expand...
Click to collapse
Good sleuthing. Hopefully someone with Gingerbread in here will try it out.
was gonna ask the same thing. obviously if the nexus S is running it, we should be able to as well since both phone use the 1gh hummingbird but im assuming the DRM security setting are probably only found in gingerbread for us so we may have to wait unless like Zenlnsight said, possibly install a workaround so it is compatible for us on froyo
Android 2.2 phones are supported, so it doesn't seem to be a Gingerbread only thing. Maybe it's a hardware support only thing.
ZenInsight said:
That sucks. But I was more interested in using a .prop file that pretends to be a Nexus One and would then allow the app to work. Some folks around here are pretty bright.
Click to expand...
Click to collapse
This
10char
Getting Protected Apps To Show in Market (Nook example below)
Certain apps (e.g. SlingPlayer) have special settings which prevent them from being backed up normally. These apps do not appear by default in the market. To enable these apps you need to change the device fingerprint and spoof a valid device.
adb pull /system/build.prop
Edit the following line:
ro.build.fingerprint=generic/sdk/generic:Honeycomb/Nook/eng.rbrune.20110131.162619:eng/test-keys
so that it reads:
ro.build.fingerprint=google/soju/crespo:2.3.2/GRH78C/93600:user/release-keys
This spoofs the Nexus S running Android 2.3.2 per this site
Save the modified build.prop to NC.
adb remount
adb push build.prop /system/
Now clear the Market cache. On the NC, open the settings app and make the following changes:
Settings -> Manage Applications -> All -> Market
Clear Cache then Force Stop -- DO NOT clear data
Settings -> Manage Applications -> All -> Google Services Framework
Clear data then Force Stop
Then reboot the NC, for example:
adb reboot
Disconnect the USB cable.
Market should now show the protected apps.
Anyone want to try to run Netflix after messing with their build.prop file?
Going to poke around and see what I can do.
Didnt get the unsupported device popup after changing bulid.prop but after inputting my email and password the app stopped and went to the homescreen. Im restarting my phone and will try again. I may have put in the wrong login info also as I haven't logged into netflix in a long time.
After restarting the unsupported device prompt comes back and it still doesn't work. FU Netflix
What about changing ro.build.description?
I edited my build.prop, was able to get to the login screen but then got dumped to homescreen after putting in my info. I also tried incorrect info, which it informed me was wrong but did not dump me to homescreen.
Don't really know what any of this means, but it's what happened.
Has anyone tried running this on a Gingerbread rom + spoofing their build prop?
On Gingerbread it may be running a gingerbread only function...or etc..
also tried running a logcat while doing it?
Schuby said:
Going to poke around and see what I can do.
Click to expand...
Click to collapse
Schweet! Do it bro. I'm at work right now. I'm going to try it later.
Edit: I just saw replies coming in . May be I spoke to soon.
Someone posted the Nexus S 4g build.prop here:
Android Hacking Netflix thread:
http://forum.xda-developers.com/showpost.php?p=13733918&postcount=170
Nexus S 4g Build.prop file
Someone else said:
I don't know what to say - I'm watching Futurama on my Nook Color as I type here on my laptop. I changed the build.prop to match my G2, and it worked right away.
What changes did you make
ro.product.model=HTC Vision
ro.product.brand=tmobile
ro.product.name=vision
ro.product.device=vision
ro.product.board=vision
ro.product.manufacturer=HTC
ro.build.fingerprint=tmobile/htc_vision/vision/vision:2.2/FRF91/277427:user/release-keys
Also, it's not actually working on my G2 as it turns out, just on my nook, which is weird.
Click to expand...
Click to collapse
Keep in mind when you guys modify this stuff, Netflix might be leaving behind residual data in /data or the SD card. If you merely change the build.prop and re-try, it may not continue to work.
This almost works for me:
ro.product.model=HTC Vision
ro.product.brand=tmobile
ro.product.name=vision
ro.product.device=vision
ro.product.board=vision
ro.product.manufacturer=HTC
ro.build.fingerprint=tmobile/htc_vision/vision/vision:2.2/FRF91/277427:user/release-keys
I used SGS Tools to change the values
It starts playing but only audio, no video and then goes back to the main netflix screen.
found it here:
http://forum.xda-developers.com/showpost.php?p=13732640&postcount=11
haas599 said:
Didnt get the unsupported device popup after changing bulid.prop but after inputting my email and password the app stopped and went to the homescreen. Im restarting my phone and will try again. I may have put in the wrong login info also as I haven't logged into netflix in a long time.
After restarting the unsupported device prompt comes back and it still doesn't work. FU Netflix
What about changing ro.build.description?
Click to expand...
Click to collapse
Are you on Gingerbread though?
Hey guys. Can we start listing what ROMs and version of Android we are using? I only think this works with Gingerbread ROMs...like ED12.
ZenInsight said:
Hey guys. Can we start listing what ROMs and version of Android we are using? I only think this works with Gingerbread ROMs...like ED12.
Click to expand...
Click to collapse
Evo4g is supported and it doesn't have official Gingerbread yet.
As far as the Epic goes, nobody has it working yet.
The epic 4G continues to be the bastard child of support and development.
Sent from my SPH-D700 using Tapatalk
Hello all, I am new here so I'm sorry if I am ignorent of anything
I have an Iconia tab, and have been patiently for the netflix app to be released. Well it finally seems like it has been done here
http://forum.xda-developers.com/showthread.php?t=1076150
My problem is when I download the apk and try to open it I get the error ''cannot open file''.
Any suggestions? Thanks
Download the apk with Firefox mobile or your desktop PC instead of the default browser. AFAIK, streaming still doesn't work for us, just queue management.
Its not working on the acer yet.
Edit: ninja'd
I think I read somewhere it's a Honeycomb issue, not just an Acer issue.
the device check disabled apk asks you to upgrade to the latest version on the market (which doesn't exist on our device), and the non-check disabled version will let you browse, but if you try to play a video it pops an error saying the device is not supported.
Hopefully we'll get something that works in the near future. Netflix claims to be working on other devices and it looked like tablets were on the list as well.
Thanks everyone for your answers. Any chance we can keep this thread going as an update to everyone wondering when netflix will be brought over so users do not have to scour the web in search of the answer?
Just a bit of a noob question, but what about changing your build.prop?
If I understand correctly, that requires root, and I do not want do downgrade to gingerbread.
Yup..
dkhuizenga said:
If I understand correctly, that requires root, and I do not want do downgrade to gingerbread.
Click to expand...
Click to collapse
I have heard of doing this and am pretty sure root is required.
Such a shame Netflix has not gotten it together for us yet - this screen rocks as a movie player!
dkhuizenga said:
If I understand correctly, that requires root, and I do not want do downgrade to gingerbread.
Click to expand...
Click to collapse
I have my acer rooted, but not well enough it seems. I still run honeycomb, and in fact still get firmware updates from acer. I rooted it so I can setup my two 1tb external hard drives to it lol. just used gingerbreak and a couple other things post root. However, i did try and edit the build.prop but wont allow me to save, just read only. I havent messed with it extensively, but seems like there should be a way.
phoenixbennu said:
However, i did try and edit the build.prop but wont allow me to save, just read only
Click to expand...
Click to collapse
'mount -o remount,rw' ?
phoenixbennu said:
I have my acer rooted, but not well enough it seems. I still run honeycomb, and in fact still get firmware updates from acer. I rooted it so I can setup my two 1tb external hard drives to it lol. just used gingerbreak and a couple other things post root. However, i did try and edit the build.prop but wont allow me to save, just read only. I havent messed with it extensively, but seems like there should be a way.
Click to expand...
Click to collapse
If you use root explorer it will let you mount the file system read-write so you can edit the file.
Alright guys I am not sure if it has been tested but when I get home. I have the lib files that fixed the playback issue on sense 3.0 I will install the deactive device check version and push the lib Files It may actually work!! I just tested on another device that had playback issues worked flawlessly!! Ill let you guys know in like 2 hours or so when I get home.
Right on!
Crsdr37 - sounds promising! Let us know how it goes - since Netflix is totally dragging on getting their software working. My girlfriend's mother uses a HTC Evo 4 from Sprint - netflix support has been broken for weeks for them, and the OTA patch they tried to push out did not work. Total fustercluck
entropy.of.avarice said:
Crsdr37 - sounds promising! Let us know how it goes - since Netflix is totally dragging on getting their software working. My girlfriend's mother uses a HTC Evo 4 from Sprint - netflix support has been broken for weeks for them, and the OTA patch they tried to push out did not work. Total fustercluck
Click to expand...
Click to collapse
I actually just fixed it on my evo 15 minutes ago. When I get out I will pm you and get some information from you on her evo.
Crsdr37 said:
I actually just fixed it on my evo 15 minutes ago. When I get out I will pm you and get some information from you on her evo.
Click to expand...
Click to collapse
Would be most grateful! Take your time, I am out of classes today and girlfriend is working - got all day to geek out
i am very excited to find out on this
Alright guys so after dismantling netflix.apk the latest version the issue is within one of the files called nrdp.js Think of it as the gate keeper to our netflix enjoyment. It checks certain areas of the device here is the list we need to bypass to get the rsa key injected into our devices for access to the netflix servers.
1.Get Model
2.Get Software Version
3.Get Certification Version
4.Get ESN
5.Get ESN Prefix
Those are all the functions it calls for device checking. That I could find. There is also a certificate file ca.pem that controls how long the app works for before you have to get new certificate that is encrypted up the ass so big roadblock..... Sorry I tried and will continue to try but it does not look good... Damn those large companies with their big sticks.
Installed but error connecting after selecting a vid
I have an stock iconia with 3.1 and tonight I installed the apk mentioned in this article:
http://www.androidpolice.com/2011/0...neycomb-devices-and-possibly-most-phones-too/
App runs but when I select a vid I get:
"Sorry, we could not reach the Netflix service. Please try again later. If the problems persists please visit the Netflix website (12001)."
Anyone else getting this? Any workarounds?
ingrouille said:
I have an stock iconia with 3.1 and tonight I installed the apk mentioned in this article:
http://www.androidpolice.com/2011/0...neycomb-devices-and-possibly-most-phones-too/
App runs but when I select a vid I get:
"Sorry, we could not reach the Netflix service. Please try again later. If the problems persists please visit the Netflix website (12001)."
Anyone else getting this? Any workarounds?
Click to expand...
Click to collapse
Same issue.
I wonder if a build prop for 1.3 would work?
Xoom users seem to be having great sucess
I'm new to android guys so please do bare with me
I have a note 3 and I remember watching the keynote liking in particular the multi window feature especially as the note 3 can have the same app open twice eg two browsers.
The issue is I cannot get two YouTube apps working although this is supported!! As soon as I drag the second window in the first one pauses and imitates whatever is on one but rather than playing the video it shows a black screen
I cannot get any joy despite all my google-ing any suggestions or can someone please try it with their note 3. I am not rooted and got a brand new replacement yesterday
Please check my screen shots
Thanks
Strange
Sent from Samsung Galaxy Note 3. checkout MOD Edit - deleted
If you like my post hit thanks .
bbm pin:75B457CE
Hmm that is bizarre, I have just tested mine to see and it works OK, have you tried clearing the app data from YouTube? - -- Settings > General > application manager > find YouTube and clear cache/data etc. Give it a shot.
Just gave that a go and no luck at all. I don't understand it's a brand new handset the one which I exchanged done the exact same thing
Deleted
Ronny220 said:
I'm new to android guys so please do bare with me
The issue is I cannot get two YouTube apps working although this is supported!!
Thanks
Click to expand...
Click to collapse
How do you know playing two videos simultaneously is supported? That's alot of CPU and network usage to be able to do both at once.
fjl307 said:
How do you know playing two videos simultaneously is supported? That's alot of CPU and network usage to be able to do both at once.
Click to expand...
Click to collapse
Of course this feature is. Firstly see my attached photos and secondly this was mentioned as a key feature in the Samsung presentation when the note 3 was announced
Found it in the end guys. uninstalled the update 5.3.24 (YouTube app) and now it works a treat