Sorry, for n00b question. - Droid X General

Just acquired a well taken care Droid X.
4.5.605 MB 810
Baseband BP_C_01.09.13P
Kernel 2.6.32.9
Build 4.5.1_57.DX5_35
I am getting this "Recurrent Sync" message.
I will like to Root and maybe flash Liberty 3 v2.0 rom, which I read is very stable.
How should I proceed with this?, I see a lot of good info here and a few how-to, but am little overwhelm.

Start here:
http://forum.xda-developers.com/showthread.php?t=940986
For root access and start here:
http://forum.xda-developers.com/showthread.php?t=1374281
For rom flashing. Just read is the best advice I can give. also do not take the .621 update. If you can root ASAP (it's really easy) and disable the updater. Just because that update is unrootable and will kill your plans for rom flashing...

Is there a way to disable the updater?, before I get to read all the info and get ready to root.

palmheel said:
Is there a way to disable the updater?, before I get to read all the info and get ready to root.
Click to expand...
Click to collapse
You can freeze the updater application. I believe it's called '2.3.3 Updater'.
But once you install a custom rom you will not be prompted to update.
Sent from my DROIDX using Tapatalk

palmheel said:
Is there a way to disable the updater?, before I get to read all the info and get ready to root.
Click to expand...
Click to collapse
http://rootzwiki.com/topic/19318-important-information-regarding-621-system-update/
Watch the vid on the OP of this thread. This thread in general will tell you all you need to know about the .621 update

Related

[ROM] 1.5 Downgrade With Root

Re-Cooked Jcase's dowgrade patch
Added Root w/ superuser
Zipaligned to speed up Ram
Cooked with dsixda's Kitchen....
works awsome...
this will downgrade your radio as well to the Shipped eris Radio
so if you want a Stock phone with root keeping ota certs so u can get the
2.1update when its pushed, all you need to do is flash the bootloader and
recovery from jcase's downgrade package.
Happy flashing.
http://www.4shared.com/file/rmRTErXt/eris15rooted.html
Hahahah side by side development. Awesome. I just uploaded my latest 1.5 root right before seeing your post.
Hit me up on IRC, I am trying to add overclock support to our 1.5 kernel.
alright will do in afew working on this other port atm about to post and ill hop on
Sent from my Eris using the XDA mobile application powered by Tapatalk
1.5 Downgrade to Cupcake
Will this 1.5 Cupcake downgrade work on an Eris that has had the 2.1 Leak Installed?
Sorry
Ok so further reading leads me to believe this is NOT for LEAK. Sorry for the Question. Just following links looking for some CURE for the 2.1 LEAK I landed here. In the QUest for searching endlessly for a cure, I got my hopes up. Keep up the Great Work. I will wait patiently, hoping someone will find a way to fix for use that Jumped on the LEAK too soon.
To date there is no root nor downgreade for those on the leak. We are working on it.
Besides the root and such, this will run as if i just bought the phone?
worked great!
Sent from my Eris using the XDA mobile application powered by Tapatalk
Question, i seem to have lost the home weather under the time, anyway to get it back?
Link is broken... I need 1.5 to fix my MEID!
tuningnoob said:
Link is broken... I need 1.5 to fix my MEID!
Click to expand...
Click to collapse
You could try FlashBack15 at the very bottom of the first post. This will unroot your phone. Then you could hope for the OTA upgrade and re-root (or is it just as easy to root from 1.5?).
roirraW "edor" ehT said:
You could try FlashBack15 at the very bottom of the first post. This will unroot your phone. Then you could hope for the OTA upgrade and re-root (or is it just as easy to root from 1.5?).
Click to expand...
Click to collapse
The Eris Cupcake releases (1.5: 1.16.605.1 & 1.17.605.1) are susceptible to the "wag3slav3" symlink rooting exploit, so they can be rooted, for instance with the (Android Forums) "dummies" method. Jcase's "one click" rooting app for the Eris was built with Android 2.1 dependencies, so even though the rooting method works with 1.5, the rooting app does not).
I'm not sure why an MEID would ever needs to be "fixed", however. Smells kinda fishy to me.
bftb0

[Q] Stock Gingerbread 2.3.3 (4.5.596) Rooting

Hello XDA
I recently updated my phone through Verizon to
Android Version 2.3.3
System Verion 4.5.596
Before I was interested in rooting. I have been researching and tried everything I could find to root this version
but nothing has worked. (gingerbreak, z4root, easyroot, ect.) I did a factory reset/system wipe.
(still 2.3.3 - 4.5.596 on reset)
Am I doing something wrong? Should this version be rooting with GingerBreak or another root program?
(They all are stuck on loading screens never finish or reboot)
or (from what I have read) do I need to rollback to an earlier version to be able to load the 'prerooted'
gingerbread OS?
I am fairly new to this, and am sorry for my ignorance. If it is out there somewhere a link would safice
but as of now I haven't been able to find anything dealing directly with my situation. Thank you for any
and all help.
-Laskowsky
There's no rooting method through stock 2.3.3 yet
you're gonna have to SBF back to stock .340 and flash p3droid's OTA rooted gingerbread ROM
Ok, I was hoping there was a simplier way but expected that for the most part from what I had read. Thank you.
Rooting my Stock Gingerbread 2.3.3 (4.5.596) Droid X
I don't want to sound redundant to skate 72w but I have searched the forums up and down.. Is there any other one-click way to root my stock GB 4.5.596 droid x? I found this article
I do not see where it talks about the 4.5.596...
If not, can someone please direct me in the right way to get froyo back so I can have my wireless tether back!
Thanks,
-Nick
There is a rooting method or p3droid would not have been able to root. Wish he would share.
Sent from my DROIDX using Tapatalk
taweekly said:
There is a rooting method or p3droid would not have been able to root. Wish he would share.
Sent from my DROIDX using Tapatalk
Click to expand...
Click to collapse
p3 tends to 'find' things that other folks don't have. He has a rooted .596 but it's achieved through flashing. He has not announced a way to root the OTA, and I think he would do so if he had one.
Everyone questions p3droids methods.
If you want to root: do some searching here.
Edit: link fixed
Jmoney47 said:
Everyone questions p3droids methods.
If you want to root: do some searching [URL=" http://tinyurl.com/5wjfnt"URL]here.[/URL]
Click to expand...
Click to collapse
Your link doesn't seem to work.
kent c said:
Your link doesn't seem to work.
Click to expand...
Click to collapse
Fail troll is fail
GB OTA is not rootable.........yet. If you want Froyo back you need to SBF back to it.
Sent from my DROIDX using XDA Premium App
Jmoney47 said:
Everyone questions p3droids methods.
If you want to root: do some searching here.
Edit: link fixed
Click to expand...
Click to collapse
LOL
Sent from my DROIDX using XDA App
LOL
That is awesome....I should share with my staff when they ask me where and how I found an answer...
Sent from my DROIDX using XDA Premium App
@jmoney... that quite literally made me lmfao on the public bus
Sent from my DROIDX using the XDA mobile application powered by Tapatalk
Has anyone posted a root for the OTA version yet?
doclee7123 said:
Has anyone posted a root for the OTA version yet?
Click to expand...
Click to collapse
Is the sticky still there?
I would consider myself to be a noob when it comes to rooting, all i want it for is the wireless tethering. I have done an sbf once but dont feel very good about doing it again, and am just looking for another one click method to rooting like z4root. I am running on gingerbread 4.5.596 from verizon.
OTA Root
I love my Droid X - hate the VZ CRAPWARE.
I now have the 4.5.596 (2.3.3) OTA update.
The only update method to obtain root is to SBF to Froyo - Root - and install the TBH/P3 Droid pre-rooted update.
At this point, I have too many apps installed and too many settings to reconfigure to take the route.
My main goal is to obtain root (such as a Z4 root style one click) so that I can maintain all my apps and configurations. Once I root, then I can freeze all the VZ Crap (every Google Maps update requires me to choose between GM and VZ Navigator the first time 1 click an address, and having to choose the contacts database EVERY TIME to Google is a PITA - Backup Assistant should be something I can DISABLE).
Sorry for the rant - to the point - does anyone know if ongoing efforts are being made to create a one-click Root for the Droid X? (Or a multi step that preserves data / apps / and settings)
Jmoney47 said:
Everyone questions p3droids methods.
If you want to root: do some searching here.
Edit: link fixed
Click to expand...
Click to collapse
Lmao winning
TappaTappaTappa
I also am fairly new to the rooting process as well as the DROID software myself..I had an iphone that I jailbroke and was very familiar with it and how it worked..I updated to 2.3 before I considered rooting..now I want to root..I have read alot on sbfing and returning to froyo ..what does this consist of and how do I do it ? Any help would be great..thanks
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
go to the DX wiki and look for FULL sbf it gives u all the details u need and links to the files... helped me out alot when I bootlooped my dx
Sent from my DROIDX using the XDA mobile application powered by Tapatalk
guess what sucks about rooting leaks is that it gives the vendors the holes to repair.. if we didnt root the latest.. the ota probably would probably be rootable.

[Q] z4 Rooted Droid X to Gingerbread

I have a Droid X that I have rooted using z4 Root. Will I have any problems if I un-root and then download and install Gingerbread? I realize that z4 Root can't root Gingerbread yet, but I was wondering if I could just un-root and then install the update and just wait to re-root it when z4 Root can do it? It seems like people are having issues with the X even though they un-root before they update. Why is this? Thank you all for your time. I appreciate it.
People usually have problems updating because they have deleted or frozen bloat in their system folder.
If you unroot, and replace any bloat you may have removed, you should be able to update without a hitch.
After you download the OTA Gingerbread you won't be able to gain root again. The only option is two flash a two part prerooted install of .596 Gingerbread provided by Team Black Hat.
Sent from my DROIDX using XDA App
Thank you much. I shouldn't have any problem then because I haven't frozen or deleted anything. Is the z4 Root developer going to try to make a version of z4 Root that will root Gingerbread?
rld187 said:
Thank you much. I shouldn't have any problem then because I haven't frozen or deleted anything. Is the z4 Root developer going to try to make a version of z4 Root that will root Gingerbread?
Click to expand...
Click to collapse
I for one hope so. I want to be on Gingerbread, but the OCD in me wants the OTA.
Question- OTA? What does it stand for?
rld187 said:
Question- OTA? What does it stand for?
Click to expand...
Click to collapse
Over The Air.
I unrooted with z4 Root and did a wipe and a restore to factory reset. I tried to update to GingerBread 4 times but all four times it failed. Somehow, even in the return to factory wipe, ClockworkMod Recovery stays on the Droid X. Why? I think it is the ClockworkMod Recovery that is preventing me being able to update to GingerBread. Do you think that might be the cause? In other words, resetting it to factory condition doesn't really reset to factory condition. How do I fix this? Should I just stay rooted with z4 Root and wait for a way to update to GingerBread from you guys? I'm just not sure what to do. Thanks for your time. I'm running Android Version 2.2.1 with a System Version of 2.3.340.MB810.Verizon.en.US.
Root froyo with z4 then follow directions on this thread
Link Fixed
http://forum.xda-developers.com/showthread.php?t=1126554
That link gives me a 404. Do you have another one? Thanks for your help.
I did not unroot...
Hello...Noob here. Question I did not indoor my DROID b4 downloading 2.3
Should I have? And what will happen since I didn't?
I also have one other question. I accidentally tapped on Updates and now it is trying to download the update. Is there a way that I can stop this manually? Thanks.
Venusismyname said:
Hello...Noob here. Question I did not indoor my DROID b4 downloading 2.3
Should I have? And what will happen since I didn't?
Click to expand...
Click to collapse
huh? need some more info there. have no idea what you're talkin about.
also, this is the droid x section, not droid.
rld187 said:
I also have one other question. I accidentally tapped on Updates and now it is trying to download the update. Is there a way that I can stop this manually? Thanks.
Click to expand...
Click to collapse
i thought you wanted to update to gb? why would you want to stop it?
why dont you just update to the pre-rooted gingerbread. see here http://www.mydroidworld.com/forums/...-5-596-release-thread-something-everyone.html
I want to stop it because I have tried to install it 4 times and it has failed to install on all four attempts. It won't install so I don't want to waste the time and the data.
The link is not working for me either
Follow the instructions below to return to froyo or upgrade to gb rooted or not.
Check out these links.
Link 1 makes a linux CD that you can use to SBF back to Froyo in about 10 minutes. This is a very easy method to get back to froyo. If you can burn an iso file to a CD then you can do this method.
http://www.droidxforums.com/forum/d...-solution-your-windows-rsd-lite-problems.html
Then you can use z4root and install pre-rooted GB using the 2 flash method at link 2. Make sure that you use Droid 2 bootstrapper and not Droid X bootstrapper to install the rooted GB.
http://www.droid-life.com/2011/05/28/download-official-droidx-gingerbread-4-5-596-for-rooted-users/
Follow the instructions closely for ensured success.
This can all be done in about 30 to 45 minutes depending on your computer skills.
Sent from my DROIDX using XDA Premium App
This guide u posted can used even if I'm on the ota gingerbread update?
Sent from my ADR6400L using Tapatalk
Fixed the link,
U can go directly from rooted froyo to rooted gb using TBH GBroot flash. Flash just like u would a rom, and u might need to install the update the kernal depending if you flash a rom. Its easy, just follow my link and scroll down to my post it gives u the steps

[Q] Root....?

When will the mytouch 4g 2.3.4 be rooted?! I read on October 1 that it'll be rooted "in the coming weeks"...its nearly November. Anyone have any updates at all? Or will 2.3.4 never be rooted? Thank you for all of your help!
likely never
billcosby41 said:
When will the mytouch 4g 2.3.4 be rooted?! I read on October 1 that it'll be rooted "in the coming weeks"...its nearly November. Anyone have any updates at all? Or will 2.3.4 never be rooted? Thank you for all of your help!
Click to expand...
Click to collapse
it will come out when the developers release it.
it'll be rooted when you downgrade to 2.2.1 :X
j/k or whenever, dunno how much progress/work people have been making on developing it
downgrade
I have tried that available link to downgrade but all in vain. i successfully got temp root but not able to perem root. so when i put downgraded stock rom, recieving message newer version is there and visionary is not helpful in my case.
Any idea how to do that .
The only reason i want to root is my camera . i dont know what happened to it. but whenever i try to use my camera it ended up in blank screen.
I am not good in that but thinking to change the rom maybe it resolve my problem
Any help / guidance thanks in advance.
amir_goo said:
I have tried that available link to downgrade but all in vain. i successfully got temp root but not able to perem root. so when i put downgraded stock rom, recieving message newer version is there and visionary is not helpful in my case.
Any idea how to do that .
The only reason i want to root is my camera . i dont know what happened to it. but whenever i try to use my camera it ended up in blank screen.
I am not good in that but thinking to change the rom maybe it resolve my problem
Any help / guidance thanks in advance.
Click to expand...
Click to collapse
What do you mean newer version? Are you following the downgrade guide that requires adb to push, execute some files, and flash all by adb. When you downgrade, you don't simply flash the pd15img.zip you should follow the guide.
Sent from my HTC Glacier using XDA App
Look in my signature, see a link to Wiki. Open it, go to section "Root", subsection "Gingerbread 2.3.4". There will be a guide which needs to be executed IN FULL.
Try and read this with caution NOT ME OR THE PERSON WHO MADE THIS IS REPONSIBLE... it has a one click downgrade and a one click root.. after all that is down, there's a root version of gingerbread available... one step at a time...
http://forum.xda-developers.com/showthread.php?t=1270561

[Q] MB860 on 2.2.2 - Where do I start

Hi,
I recently purchased an Atrix 4G for cheap and am now trying to update it to a more recent firmware version.
I currently have a:
MB860
on Android 2.2.2
running Version.4.4.20.MB860.Retail.en.DE
Checking for system updates through the phone doesn't yield any results. Threads on the web or this forum often lead to dead links or warnings about RAM problems or the possibility of bricking my device.
I'm not technologically retarded (as in I can jailbreak and install packages on an iPhone) but most of the update/flashing instructions aren't really helpful for someone who's just getting into android.
Where do I start?
I would start with the sticky at the top of this section (http://forum.xda-developers.com/showthread.php?t=1984381), or skip to the 4th sticky (http://forum.xda-developers.com/showthread.php?t=1302423).
It is written step by step.
I'm not trying to unlock my bootloader on 2.3.4, because my phone isn't running 2.3.4. I can't find any info regarding help for people still stuck on FroyoYo there, either.
The bootloader is irrespective of the version of Android you are running. Follow the directions to unlock it first, install an alternate recovery and then flash whatever you like.
TGHI said:
The bootloader is irrespective of the version of Android you are running. Follow the directions to unlock it first, install an alternate recovery and then flash whatever you like.
Click to expand...
Click to collapse
Thanks for the info. So doing this allows me to install Custom ROMs on my Atrix? While that is indeed useful, it doesn't really answer my initial question.
Is there a way to update my phone to 2.3.4 without rooting or unlocking first? I'm currently just looking for a stable webtop experience and decent battery life. If I get that on Stock 2.3.4, I might wait with the flashing experiments.
Go to settings, about, and check for updates. (if memory serves me correctly)
エイトリックス から 送ります
you need to go to motorola website and download system updater....
Sent from my MB860 using xda app-developers app
thesummoner101 said:
Go to settings, about, and check for updates. (if memory serves me correctly)
Click to expand...
Click to collapse
This tells me that my device is up-to-date.
you need to go to motorola website and download system updater....
Click to expand...
Click to collapse
The threads in the development forum warn about installing official updates. Do I risk bricking my device if I install a custom rom after using the system updater?
Placeb00 said:
Thanks for the info. So doing this allows me to install Custom ROMs on my Atrix? While that is indeed useful, it doesn't really answer my initial question.
Is there a way to update my phone to 2.3.4 without rooting or unlocking first? I'm currently just looking for a stable webtop experience and decent battery life. If I get that on Stock 2.3.4, I might wait with the flashing experiments.
Click to expand...
Click to collapse
You DO NOT want the latest stock update if you're planning on doing tinkering down the road. As far as I understand it, one of the latest OTAs pretty much blocks you from unlocking the bootloader. (Same for the Photon)
With this phone, if you put your faith on Motorola, you get royally screwed. I would break from the shackles sooner rather than later.
littleemp said:
As far as I understand it, one of the latest OTAs pretty much blocks you from unlocking the bootloader. (Same for the Photon).
Click to expand...
Click to collapse
Where are you getting this from?
A little update:
Rooted, unlocked my bootloader, flashed a 2.3.6 ROM. Everything works fine, and I'm really happy with my new phone/netbook combo.
Placeb00 said:
A little update:
Rooted, unlocked my bootloader, flashed a 2.3.6 ROM. Everything works fine, and I'm really happy with my new phone/netbook combo.
Click to expand...
Click to collapse
Could you post link where did you tutorial. I have retail Eu version and don't know where to start.
On samsung or sony its much simpler.
Or I have become more stupid
Thanks
Sent from my MB860 using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=1302423
This is the tutorial I used.
Placeb00 said:
http://forum.xda-developers.com/showthread.php?t=1302423
This is the tutorial I used.
Click to expand...
Click to collapse
Thank you.
Sent from my MB860 using xda app-developers app
revdep-rebuild error
For what it's worth:
Editing /usr/bin/revdep-rebuild.sh with nano and changing 2 instances of /var/cache to /preinstall/var/cache resolved all my problems.
More specificly:
line 262: "$WORKING_DIR" != "/var/cache/${APP_NAME}"
and
line 559: local tmp_target=var/cache/${APP_NAME}
Good luck.
just follow the official CM guide for atrix. that's the best

Categories

Resources