What are the CM7.1 Baseband settings for India?
I get no cell-reception on the Delhi-Metro with CM7.1. With stock 2.2 I could make & receive calls when on the metro.
There is Singapore, India etc base band available,I use the same and have no problems in reception. technically you can use any 900/1800 band, but if you are planning to use 2g only, then keep the base band to India.
Sent from my MB526 using XDA App
What is the default baseband for CM7.1 stable in India? I messed up with the settings using Defy baseband switcher...please help.......i need to switch back to the default setting!
As such for cm7 the default is central Europe one(under emea 3Rd one along with united kingdom), you need to change it for India for better reception. You can do it by selecting apac and the last one where India is there.
Sent from my MB526 using XDA App
The last option in APAC has Hong Kong, Taiwan Optus SEA in it....it doesn't have India in it.
I'm using CM7.1 Stable by Quarx, my phone has baseband switcher version 4.0....does your phone have an option for India?
Yes I do have.okay you can do one thing, just download the latest base band switcher from this thread http://forum.xda-developers.com/showthread.php?t=1052745 and install.this should give the option for India.
Sent from my MB526 using XDA App
I did that & found the option for India.
Once again, thanks a ton for the help premaca!
You can also select International. It works good on Indian phones.
chose any option which has baseband with 850Mhz and 2100Mhz..i think chinese one has these options..850Mhz for 2G and 2100Mhz for 3G in india..
whatever band you select... just don't forget to check whether the flight mode option functions correctly or not, from both... widget and settings.
just Tapatalking!
I use China ME 723 1.10 it has three bands
Enviado desde mi MB526 usando Tapatalk
Related
Hi, i want to know if its possible to turn an xperia x8 (e15a) to a e15i?
i've switched from telephone company A to telephone company B, and now i'm not able to use the 3g network on company B because they use 900 Mhz band (Band VIII).
If i take an e15i firmware and flash it into my e15a, will i be able to use the 900 Mhz 3g band?
•E15a have UMTS/HSPA 850/1900/2100
•E15i have UMTS/HSPA 900/2100
Click to expand...
Click to collapse
Could you do that?
lito15 said:
Hi, i want to know if its possible to turn an xperia x8 (e15a) to a e15i?
i've switched from telephone company A to telephone company B, and now i'm not able to use the 3g network on company B because they use 900 Mhz band (Band VIII).
If i take an e15i firmware and flash it into my e15a, will i be able to use the 900 Mhz 3g band?
Click to expand...
Click to collapse
Hey... I had a lot of issues while doing this, because some firmwares were stated as 2.1 and were actually 1.6 and such.
But yeah, my cellphone was e15a with baseband 006 (from Vivo Brasil carrier).
Now my cellphone is e15i with baseband 015.
First of all, do a full backup. I had to wipe ALL of my personal data.
You can search on the forum and see that a lot of people made that.
Well... the firmware I flashed worked for me, 3g works well (better than before), but it only works for the Vivo Brasil carrier. The phone was formely unlocked and I could use any carrier, but it keeps asking for a SIM unlock code for the other carriers.
There is a possibility that you won't be able to use your own carrier after flashing the new firmware. But, don't worry. Keep the original at hand.
If possible, save your own firmware before flashing the new one.
e15i to e15a
My cellphone is an e15i with baseband 015 and gingerdx, i want to use e15a baseband and keep gingerdx, i'm in Colombia and my carrier is tigo
i've installed some firmwares and some basebands, but is still in edge, how could i know which baseband is the phone using?
diegofox said:
My cellphone is an e15i with baseband 015 and gingerdx, i want to use e15a baseband and keep gingerdx, i'm in Colombia and my carrier is tigo
i've installed some firmwares and some basebands, but is still in edge, how could i know which baseband is the phone using?
Click to expand...
Click to collapse
l had a similar problem,, I Flashed my phone(E15a) with E15i firmware and my phone doesn work with the 3g of my country... So i flashed the E15a baseband and now it works...So if you need E15i just flash with the international firmware and it should work...http://forum.xda-developers.com/showthread.php?t=1099931.. Only if your new company uses the international baseband and not the american... Or you can Flash only the e15i baseband you will not lose your data
you can find them here : http://forum.xda-developers.com/showthread.php?t=976538
Hope i have helped press the thanks button if ,, sorry about my english im learning
netho25 said:
l had a similar problem,, I Flashed my phone(E15a) with E15i firmware and my phone doesn work with the 3g of my country... So i flashed the E15a baseband and now it works...So if you need E15i just flash with the international firmware and it should work...http://forum.xda-developers.com/showthread.php?t=1099931.. Only if your new company uses the international baseband and not the american... Or you can Flash only the e15i baseband you will not lose your data
you can find them here : http://forum.xda-developers.com/showthread.php?t=976538
Hope i have helped press the thanks button if ,, sorry about my english im learning
Click to expand...
Click to collapse
About to flash my E15a with E15i firmware. Only risk should be 3G compatibility with my carrier. Thanks.
Yes, there is no other diference between e15a/i ...but as I post before you can flash the e15a baseband on the e15i firmware and it will work with 3g... Cheers! Just press the thank button
Sent from my E15i using XDA App
After installing ms2ginger 3.0 my defy +reception 2g reception almost not available ( 90% not working any suggestions thanks in advance)
defy plus 2.3.6 kernel . asian retail ver. set CLK3 to 800 as instructed .
Use defy baseband switcher tool to switch to indian radio frequency 900/2100mhz
I am on this ROM (green lens) and I do not have any problems.Have upgraded from 2.1 (T-Mobile, UK)
thanks a lot its worked. god bless u buddy
how come for everyone 900/2100 works?
for me 2g always drops with 900/2100
im using 850/2100 and it drops less frequently
No network connection
pravarth said:
Use defy baseband switcher tool to switch to indian radio frequency 900/2100mhz
Click to expand...
Click to collapse
Yesterday installed CM7.1 in my defy but am unable to use internet connection(2G,3G,Edge),I searched in basband switcher in that no frquency iption for india.Some times the signal strength also bad.
Help me out
Some releases of cm7 do not have latest version of baseband switcher.
Flash this: http://forum.xda-developers.com/attachment.php?attachmentid=662294&d=1311330982
Or
Install this app: http://forum.xda-developers.com/attachment.php?attachmentid=677844&d=1312508143
Both of them include indian frequencies
I have a Atrix 4G international version but not connect to 3G HDSPA in 900 Mhz. I tried flash different radios with CWM Touch (N_01.77.30P_usa_att_25jun2011.zip, N_01.100.00R_de_o2_22sep2011.zip, N_01.100.00R_europe_retail_09oct2011.zip, and others) to change the baseband, but unsucessfully and now, the hidden service menu access through *#*#4386#*#* is missing.
Here exist any way to restore the service menu and stay trying change the base band?
What baseband or radio sbf is recommended to work HDSPA in 900 Mhz?? other post in XDA don't clarify this question.
The phone is unlocked with Max Blur 5 Rom, and actually baseband is N_01.100.00R_europe_retail_09oct2011
Auto-help: I find a program called "Hidden Menu" in Google Play. This app open the service menu and many others dialer tricks.
Sent from my Atrix 4G
I have a D802 Hong Kong version. In the secret menu (3845#*802#) i have found this: LGD802AT-00-V10C-HKG-XX-NOV-30-2013
Now, I would like to use the 4g connection in my country (Italy, carrier TIM) but the 4g option is not avaible in "network mode". After a test with another G2 (italian version and same carrier), I can say that the connection don't switch automatically on 4g but keeps the H+ one. So i think is necessary a modification.
Solutions?
Is it necessary to flash an europe radio? or something else? I'd like to keep the stock rom Lg but is not a fundamental.
Baseband: M8974A - AAAANAZM - 1.0.190036
Kernel: 3.4.0
Build: JDQ39B
I have the g2 for two days. I know it very little. I do not have much knowledge about it. Some good soul can explain to me how to do?
I need your help!
Did you verify that the device has the correct radio bands for the lte on that carrier?
x714x said:
Did you verify that the device has the correct radio bands for the lte on that carrier?
Click to expand...
Click to collapse
I don't know how to check! On the box of g2: gsm 850/900/1800/1900; wcdma 850/900/1900/2100; LTE 2100(B1)/1800(B3)/2600(B7)/900(B8)/800(B20).
My carrier is Tim but i don't kwow which band uses.
In secret menu/LTE Band section: avaible band 1,2,3,4,5,7,8,17,20,40. No one is selected.
Can i flash V10E firmware for Italy on V10C firmware for honk kong (actually on my device)?
Flashing different firmware wont help. Its either your apn is wrong or you didnt enable lte correctly. I checked and TIM uses 1800 (band 3) lte which your phone should work with.
x714x said:
Flashing different firmware wont help. Its either your apn is wrong or you didnt enable lte correctly. I checked and TIM uses 1800 (band 3) lte which your phone should work with.
Click to expand...
Click to collapse
maybe i should enable "band 3" in LTE setting in secret menu.
Hi,
I've a similar question and I hope someone could help me: I've a G2 phone using the D80210e-ESA-XX firmware.
In the product specifications, supported LTE frequency bands are 900/1800/2100/2600/850. I know that in Italy working frequency bands are 800/1800/2600. Now, my phone does not support 800 MHz: do you think is possible to upload a different firmware (IT or EUR ones) on my phone? With one of these firmware, does the device will work at 800 MHz?
Thank you so much.
I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!
zacharias99 said:
I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!
Click to expand...
Click to collapse
Hi @zacharias99, are you using the LTE in Italy?
@sunshonic, I didn't understand if your LTE works in Italy using the secret menu. Is it working?
Thank you
madner81 said:
Hi @zacharias99, are you using the LTE in Italy?
@sunshonic, I didn't understand if your LTE works in Italy using the secret menu. Is it working?
Thank you
Click to expand...
Click to collapse
No no i am using the LTE in Greece!!!
But LTE is LOCKED in Korean firmware!!!
In older Korean Firmware you could activate LTE from secret menu but in newer version this option has been removed!
The only solution in my case was to flash a european (or in your case italian) Firmware and everything worked like it should
zacharias99 said:
I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!
Click to expand...
Click to collapse
Same here, restored to stock eu/nordic. Using HK G2 in Norway. No issues with 4G now
Sent from my LG-D802 using Tapatalk
Does your country offer 4G networks? I'm in Kenya n any 4G device I ship in shows 4G even though we dont have it yet
Sent from my HTC One using XDA Premium 4 mobile app
popsi said:
Same here, restored to stock eu/nordic. Using HK G2 in Norway. No issues with 4G now
Click to expand...
Click to collapse
@popsi, @zacharias99 did you follow a specific procedure to upload the european firmware. I'm not so sure to perform it cause some month ago I've bricked an old Motorola (I don't remember the exact model) using simply a firmware of a different country. The result was a brick cause two firmware did not use the same way to allocate the memory...
madner81 said:
@popsi, @zacharias99 did you follow a specific procedure to upload the european firmware. I'm not so sure to perform it cause some month ago I've bricked an old Motorola (I don't remember the exact model) using simply a firmware of a different country. The result was a brick cause two firmware did not use the same way to allocate the memory...
Click to expand...
Click to collapse
My friend i don't really know where in this forum the instructions for flashing a new stock firmware are... (I am also new in this community)
And i flashed it with Greek instructions so my link won't help you and i don't want to post some link i haven't tested by myself...
Sorry i hope you can understand!
At moment i have no time, but if I would be you I would search in the G2 Section for instructions!
They must definitely be somewhere!
Did you subscribe for LTE with your carrier?
Sent from my LG-D802 using Tapatalk
zacharias99 said:
I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!
Click to expand...
Click to collapse
@zacharias99, I've checked that 4G can be enabled using the secret menu
1. Go to LTE-Only
2. Modem Settings
3. RAT Selection
4. Select GSM / WCDMA / LTE auto
as in the post http://forum.xda-developers.com/showthread.php?t=2494751
At the moment it doesn't seem to work for me, probably because my sim still has not been enabled for 4g.
Have you ever enabled this option (with the previous korean firmware, I mean)?
@zacharias99, @popsi: the new european firmware allows to navigate over the 800MHz frequency band for you?
Thank you
madner81 said:
@zacharias99, I've checked that 4G can be enabled using the secret menu
1. Go to LTE-Only
2. Modem Settings
3. RAT Selection
4. Select GSM / WCDMA / LTE auto
as in the post http://forum.xda-developers.com/showthread.php?t=2494751
At the moment it doesn't seem to work for me, probably because my sim still has not been enabled for 4g.
Have you ever enabled this option (with the previous korean firmware, I mean)?
@zacharias99, @popsi: the new european firmware allows to navigate over the 800MHz frequency band for you?
Thank you
Click to expand...
Click to collapse
Hi,
the procedure using the secret menu definitively works on my D80210e-ESA-XX, but I need to re-select it after every reboot.
Does anybody know how to make it permanent or how to automate this selection on boot (maybe using Tasker or something similar)?
zacharias99 said:
No no i am using the LTE in Greece!!!
But LTE is LOCKED in Korean firmware!!!
In older Korean Firmware you could activate LTE from secret menu but in newer version this option has been removed!
The only solution in my case was to flash a european (or in your case italian) Firmware and everything worked like it should
Click to expand...
Click to collapse
by flash, did you mean flash kdz of different region?
gpkumaran said:
by flash, did you mean flash kdz of different region?
Click to expand...
Click to collapse
yes exactly!
I flashed the European .kdz file!
I have an international G2 D802.. We, in india have certain operators in Band 40 LTE.. Is it possible to activate Band 40 in D802 by flashing D802T kdz in D802??? Kindly Help..
I currently own the Galaxy S7 edge UK (unlocked) unbranded handset, however my network is with Three. Supposedly you need to have bought the handset from them to have 4G Super-Voice (VoLTE/HD-Voice) enabled, so I'm wondering if anyone can help me source the firmware. I'm sure this will be useful to anyone else on the Three network with an unbranded handset.
KingRamo said:
I currently own the Galaxy S7 edge UK (unlocked) unbranded handset, however my network is with Three. Supposedly you need to have bought the handset from them to have 4G Super-Voice (VoLTE/HD-Voice) enabled, so I'm wondering if anyone can help me source the firmware. I'm sure this will be useful to anyone else on the Three network with an unbranded handset.
Click to expand...
Click to collapse
Do you know what csc code they use?
Might it be this one?
Please note that this is just pure guessing. But it was the only one I could find that had anything to do with "three"
Neemac said:
Do you know what csc code they use?
Might it be this one?
Please note that this is just pure guessing. But it was the only one I could find that had anything to do with "three"
Click to expand...
Click to collapse
I'm not sure the CSC code, but this looks promising. Couldn't find anything regarding Three myself. Thanks
KingRamo said:
I'm not sure the CSC code, but this looks promising. Couldn't find anything regarding Three myself. Thanks
Click to expand...
Click to collapse
Three is a brand of CK Hutchison Holdings (Hutchinson 3G -> H3G). More info about: HERE.
Just download the app from playstore
Sent from my SM-G935F using XDA-Developers mobile app
I'm trying to do the same thing. Have you managed to get it workking. I found the following three firmware: H3G-G925FXXU3QOLD-20160111115713.zip
Latest BTU firmware has it as default (3 sim on unbranded S7 Edge).
Use the Samfirm tool (http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647).
1. Set "Model" as SM-G935F and "Region" as BTU.
2. Check "decrypt automatically".
3. Extract the decrypted file with WinRar or similar, then use odin to flash.
Sent from my SM-G935F using Tapatalk
Hi guys I have S7 edge unlocked bought straight from Samsung webshop. I am on THREE UK too.. and I wanna connect to band 20 but it doesnt let me ..
How can I lock the 4g on band 20?? Do i need to install a different firmware? i really need help
professorz said:
Hi guys I have S7 edge unlocked bought straight from Samsung webshop. I am on THREE UK too.. and I wanna connect to band 20 but it doesnt let me ..
How can I lock the 4g on band 20?? Do i need to install a different firmware? i really need help
Click to expand...
Click to collapse
No need to lock will stay default unless it auto changes by itself but for me its okay and 4G voice works fine as default like on all devices
There is no need to flash H3G firmware any more. I have returned back to stock unbranded volTE works.
Just use smartswitch to revert back to stock firmware!
Sorry for the bump but does anyone know what settings were changed on the S7 root directory to allow unbranded devices to connect? I looking at modifying the files myself for the 6P as Three don't seem to be taking the rollout seriously for unbranded devices - so far the only thing I've found that relates to H3G is the mcfg_sw.mbn that states "No VoLTE" within, though the Swedish H3G configuration allows VoLTE, so I'm going to try modifying that unless anyone around has any ideas?
I've got a three s7edge couldn't get volte to work ended up flashing btu firmware and there is it listed in Network and it's working when there is no coverage as I get a volte displayed along with the empty signal bars
Didn't trip knox and warranty intack
Sent from my SM-G935F using XDA-Developers mobile app
My stock firmware on a UK model has VoLTE enabled for Three UK. It's just not prioritised and only kicks in when low 3G signal.
As far as I understand it it will only work when u have no or very little signal
It's worked for me a few times such as deep inside a building
Sent from my SM-G935F using XDA-Developers mobile app
I'm on Vodafone even if your ROM supports it you have to ask Vodafone to enrol ????
Sent from my SM-G935F using XDA-Developers mobile app
Do you all have WiFi calling working? I'm on a Xiaomi Mi5 running LOS and would love to patch my ROM and ditch crappy threeInTouch
Sent from my MI 5 using Tapatalk