ned some help - Milestone 2 General

Hello there i'm following xda since a while now, and this time i need some help...
first, sorry if my english sound bad, it's just because i'm french... :'(
i'm trying argen2stone on my m2 just now, and i want to come back to [ROM] [02/20] MIUI 2.2.17 GB 2.3.7 + ICS Multilanguage for Milestone 2 but i don't know how to do it.
I'm lost with kernel, sbf, and all this downgrade upgrade method.
Anyone can just point me on a tutorial things or explain me how to do it ?
i've tried to just update.zip on CWM but all i obtain is a black screen (no boot at all)
i've tried lots of sbf and now i'm stuck on this one. It's working but i really want to go back to miui.
my spec :
version : 64.1.22.A953.retail.en.GB
android version : 2.3.4
baseband version : EPU93_U_00.60.00
version noyau : [email protected]#1
build : mils2_U6_4.1-22
SBF used : MILS2_U6_4.1-22_SIGNED_UCAMILESTONE2B1B80E1014.0R_UCXMILE2GBQWR TGB_P016_A006_HWp2a_Service1FF.sbf.gz
thx by adance for helping me to understand how i can do this !
Malekk

Before you install the zip file, try to wipe cache and dalvik first. Efter installing the zip try to boot. If still it does not work, try to wipe data he reboot again.

Related

Problem with new kernal

hi
is there anyone whocan help in in installing the rom with kenal 2.6.35
i tried few roms like aurora 4.03 and miui (2.6.35) but everytime i get the problem of .... NO NETWORK AND BATTERY STATUS NOT SHOWING
i used clockworkmod 5.5.0.4 for factory reset, cleared cache, cleared dalvikcache but results, every time the same problem persists, kindly help in installing arom with 2.6.35 kernal
thanks in advance
chochweet said:
hi
is there anyone whocan help in in installing the rom with kenal 2.6.35
i tried few roms like aurora 4.03 and miui (2.6.35) but everytime i get the problem of .... NO NETWORK AND BATTERY STATUS NOT SHOWING
i used clockworkmod 5.5.0.4 for factory reset, cleared cache, cleared dalvikcache but results, every time the same problem persists, kindly help in installing arom with 2.6.35 kernal
thanks in advance
Click to expand...
Click to collapse
sounds like you tired to install over a froyo rom/kernel, did you upgrade to 2.3 official before installing the .35 recovery and rom?
Edward Stanbury said:
sounds like you tired to install over a froyo rom/kernel, did you upgrade to 2.3 official before installing the .35 recovery and rom?
Click to expand...
Click to collapse
hi
i am using miui from the last few months now, i installed cyanagen , all these roms are based on 2.3 and at present i am using miui_u8800_2.2.24 andi tried to install rom from this rom only, i dont use froyo, but still the problem persists,
can u help
You need to install OFFICIAL 2.3.5 if you want to use .35 kernel ROMs (new CM7.2, Aurora, new MIUI...). It is not enough if you just install a custom 2.3 ROM beacuse older 2.3 ROMs use .32 kernel, so you need to update to official 2.3.5 which also changes some other files so you can use .35 kernel and from official you can go to .35 kernel custom ROMs.
now different prob
yannn007 said:
You need to install OFFICIAL 2.3.5 if you want to use .35 kernel ROMs (new CM7.2, Aurora, new MIUI...). It is not enough if you just install a custom 2.3 ROM beacuse older 2.3 ROMs use .32 kernel, so you need to update to official 2.3.5 which also changes some other files so you can use .35 kernel and from official you can go to .35 kernel custom ROMs.
Click to expand...
Click to collapse
hi
thanks for what u said but
i installed official 2.3.5 but now there is no imei and when i try to load into pink screen to change the recovery, it is not mounting, seems there r no files in it,
please help
and also when i revert back to 2.2 it shows files in boot screen in boot loader (pink Screen) and there i can change the latest recovery 5.5.0.4 but again the problem is back to .32, is there any way i can install only kernel to first change from .32 to .35 and then try to install a different rom (.35)
i would also like to add the official update i used was Android 2.3 V100R001C00B526G001 and now there is one more update Android 2.3 V100R001C00B528G001, currently i am downloading that, i will let u know what happens after i download that
chochweet said:
hi
thanks for what u said but
i installed official 2.3.5 but now there is no imei and when i try to load into pink screen to change the recovery, it is not mounting, seems there r no files in it,
please help
and also when i revert back to 2.2 it shows files in boot screen in boot loader (pink Screen) and there i can change the latest recovery 5.5.0.4 but again the problem is back to .32, is there any way i can install only kernel to first change from .32 to .35 and then try to install a different rom (.35)
i would also like to add the official update i used was Android 2.3 V100R001C00B526G001 and now there is one more update Android 2.3 V100R001C00B528G001, currently i am downloading that, i will let u know what happens after i download that
Click to expand...
Click to collapse
You can change recovery with root explorer. Here is a great guide: http://forum.xda-developers.com/showthread.php?t=1420728
Every ROM from beta2 on has locked bootloader so you cant change files when in pink screen but you can unlock it after you rooted it and changed recovery (search development forum for tutorial)
Problem solved
yannn007 said:
you can change recovery with root explorer. Here is a great guide: http://forum.xda-developers.com/showthread.php?t=1420728
every rom from beta2 on has locked bootloader so you cant change files when in pink screen but you can unlock it after you rooted it and changed recovery (search development forum for tutorial)
Click to expand...
Click to collapse
thanks alot, i changed the recovery after usig file expert and then installed aurora, now its working fine, thank god i had already taken my imei backup
thanks again

[Q] Which rom for Defy red lenss ?!

ok so i unbrick my defy uffff finally but i have another problem.
I flashed everything from http://forum.xda-developers.com/show....php?t=1542956
Now I want to flash a mod (miui or CM) but I'm afraid that I brick defy again. Could U recommend something that has a PL language? nothing nightly! NO TEST version
about my system now:
android 2.3.6 rooted
karnel version: 2.6.32.9-ge281b6e
[email protected]#1
bulid number: 4.5.1-134_DFP-231
pls help me choose good mod.

[Q] Installing Android 4 on Defy (Bayer Cam)

Hi,
I recently bought a refurb Defy and was trying to install android 4 on it. I have gone through the forum but i am confused what to do.
I have rooted my phone using Superoneclick. I have installed ROM Manager from app store. But now i am stuck.I am reading posts but i am getting confused as to what to do.
The following are the defy details
Cam -Bayer
Android Version 2.2.2
Kernel Version 2.6.32.9-ga28fcc4
BuildNumber JOREM_U3.4.2_177-3
Can anybody please help me simple steps as to how to install android 4
Follow a guide on how to instal CM7 but replace the zip file with the one from a CM9 build (for the defy, not the defy+)
Sent from my MB525 using XDA
Install guide (courtesy of nogoodusername):
A How to on flashing ICS(Defy Plus Builds)
1:Head over to Stable Recovery from boot menu
2:Wipe Data (Nandroid Backup Before Doing this [optional])
3:Install Zip from SD
4:Select ur ICS(DefyPlus) zip
5:FLash
6:Flash CM9 Kernel
7:Flash Gapps zip(On first page of ICS DeV thread)
8:Clear Cache and Dalvik Cache
How To Flash ICS(Defy Builds)
1:Head Over To Stable recovery
2:Wipe Data
3:Install ZIp from SD Card
4:Select ICS(Defy) .zip
5:Flash
6:Flash CM7 Kernel
7:Clear Cache and Dalvik Cache
FIrst Boot will take some time...
TO CLEAR YOUR CONFUSIONS ABOUT GB KERNEL ICS AND FROYO KERNEL ICS
I have seen lot of confused user out there asking about which kernel to flash and stuff... So here u go read below...
So our beloved Awsome Developers make two types of nightlies
1-For DefyPlus(Can Also be used on Defy(RedLens))
These are the GB/CM9 kernel builds
These are found under /cm9-nightly-defy+/ folder of the servers which we have
To install these you need to follow the TuT to install ICS Defy Plus Above...
Green Lens Camera Wont work on these(Correct me if I and wrong)
2-For Regular Defy(Do not work on Defy plus)
These are Froyo/CM7 kernel Builds
These are found under /CM9-Nightly-Defy/ folder of the servers which we have.
To install these follow the TuT to install CM9 ICS FOR Defy stated above
3-Well there is no 3rd build(There is The MileStone2 Port by Walter79,But now that we have camera on our builds that one is not usefull...)
Click to expand...
Click to collapse
Basically, as labsin said, you can follow the same steps of CM7 flashing guide, but changing the build with an CM9 one and adding the correct kernel. In your case, you can choose which kernel to use, because Bayer Defy is compatible with both Froyo and Gingerbread kernels.
Questions go in the Q&A section

[Q] How to downgrade from CM9 to stock ROM?

Hi
I have defy+ (MB526) Red lens.
I upgraded from stock ROM Android 2.3.6 to CM9 (4.0.4) Jordan nightly 13.6.2012.
New android works great but it has one HUGE annoying bug - battery wont charge more than 4.15V and it used to be 4.35V.
I was reading and I know it bugs exists for many people and there is no solution I tried 2 different battery patches and it didnt work.
So now I want to go back to CWM backup that I did on official ROM (nand backup). But I heard it could be a problem because now i got newer kernel?!
Those are the details I have now:
CM9 Nightly jordan 13.6.2012 Android 4.0.4:
Baseband version:
EPU93_U_00.59.01
Kernel version:
2.6.32.9-gbdd614e
[email protected] #1
----------------------------
And this was my stock Android before upgrade to CM9:
Stock Android 2.3.6:
Baseband version:
EPU93_U_00.60.03
Kernel version:
2.6.32.9-ge281b6e
[email protected] #1
Build:
4.5.1-134_DFP-231
----------------------------
So my question is can I use nand recovery to go back to my stock android backup that i have. (full system backup)?
Thanx
Download the SBF file and flash it with RSD lite
Are you sure I cant restore NAND backup? As far as I can see, both versions use same GB kernel 2.6.32.9-xxxxx
Thanx
drug-tito said:
Are you sure I cant restore NAND backup? As far as I can see, both versions use same GB kernel 2.6.32.9-xxxxx
Thanx
Click to expand...
Click to collapse
if you did a NAND backup befor flash, restore it!

defy mb526 unable to flash rom - please help

It is rooted, cmw and followed all instructions
I tried several 2.3.7 versions like nothing but speed and others. It installs correctly - no errors. I reboot ans surprise, it's still the same stock 2.3.5 rom. then i tried a few 3.1 and 4.4 versions, same result.
i simply cant flash any rom
what can i do?
build: 4.5.2-51_dfl-50
android 2.3.5 (factory)
model mb526
thanks

Categories

Resources