hello everyone, i just got an unlock streak to use with t-mobile. im the second owner but the other guy said he just received it as a replacement from dell. this are the specs
baseband:GAUSB1A140514-US
build number:2.2
my problem:the phone is unlock so when i put my sim and boot i get the led flash 3 times and then goes on a boot loop. and it will keep doing it unless i take out my sim. i manage to get it to somewhat work by booting w/o sim, then put phone on airplane mode then off. place sim and boot. then i take it off plane mode and quickly turn of data. then wait for it to recognize tmobile towers, then turn on data and it works for a few mins then goes on a boot loop again. has anyone had this issue?
my second problem is i try to flash several GB base roms and it flashes but i get a lot of FC and cant run the rom. I currently have (miui 2.3.2 ENG DS5 ) and it runs fine w/o my sim. as soon as i put my sim its back to the boot loop.
btw i am not a noob to android, but am a noob to the dell streak. any help,tips,comments is appreciated thanks.
JDM-Bb said:
hello everyone, i just got an unlock streak to use with t-mobile. im the second owner but the other guy said he just received it as a replacement from dell. this are the specs
baseband:GAUSB1A140514-US
build number:2.2
my problem:the phone is unlock so when i put my sim and boot i get the led flash 3 times and then goes on a boot loop. and it will keep doing it unless i take out my sim. i manage to get it to somewhat work by booting w/o sim, then put phone on airplane mode then off. place sim and boot. then i take it off plane mode and quickly turn of data. then wait for it to recognize tmobile towers, then turn on data and it works for a few mins then goes on a boot loop again. has anyone had this issue?
my second problem is i try to flash several GB base roms and it flashes but i get a lot of FC and cant run the rom. I currently have (miui 2.3.2 ENG DS5 ) and it runs fine w/o my sim. as soon as i put my sim its back to the boot loop.
btw i am not a noob to android, but am a noob to the dell streak. any help,tips,comments is appreciated thanks.
Click to expand...
Click to collapse
You need to flash gingerbread baseband files which are amss.mbn and dsp1.mbn through fastboot.
If you are not new to Android I'm assuming you have fastboot and adb drivers setup on your computer and/or the androidsdk installed to the C: drive and paths set to make command line flashing easy... if not then now would be the time to get all that done, if not then you will be back every other day asking for help and getting flamed..
on a side note, had you bothered to read QUITE A BIT MORE the answers I just gave you are provided in the stickies, not even much need to search really, so please don't be one of those newbies that starts a new thread or posts each time your Streak hiccups, ALL the info you need has already been gone over more times that I care to remember
Your baseband indicates the Streak at one point was running 405, the beta Gingerbread build. It's no wonder you're having problems given you're attempting to run Froyo with a beta Gingerbread baseband.
Where this Streak is used, it's best to flash a stock ROM first to ensure the Streak works properly. 407 would be perfect for this as it's the stock Gingerbread build but you could also use one of the stock Froyo ROMs as well. After flashing the stock ROM and making sure everything is working, then go to your chosen ROM, using the information in the stickies.
Strephon Alkhalikoi said:
Your baseband indicates the Streak at one point was running 405, the beta Gingerbread build. It's no wonder you're having problems given you're attempting to run Froyo with a beta Gingerbread baseband.
Where this Streak is used, it's best to flash a stock ROM first to ensure the Streak works properly. 407 would be perfect for this as it's the stock Gingerbread build but you could also use one of the stock Froyo ROMs as well. After flashing the stock ROM and making sure everything is working, then go to your chosen ROM, using the information in the stickies.
Click to expand...
Click to collapse
thanks for the reply, so then what you are saying is that the phone was on GB at one point? man, i knew this guy tryed to flash a dif rom before he sold it. He told me he just got it replace by Dell and decided he didn't want it. i fixed my second problem but im still having the issue with the phone rebooting when data is turned on and then freezes at boot screen.
cdzo72 said:
You need to flash gingerbread baseband files which are amss.mbn and dsp1.mbn through fastboot.
If you are not new to Android I'm assuming you have fastboot and adb drivers setup on your computer and/or the androidsdk installed to the C: drive and paths set to make command line flashing easy... if not then now would be the time to get all that done, if not then you will be back every other day asking for help and getting flamed..
on a side note, had you bothered to read QUITE A BIT MORE the answers I just gave you are provided in the stickies, not even much need to search really, so please don't be one of those newbies that starts a new thread or posts each time your Streak hiccups, ALL the info you need has already been gone over more times that I care to remember
Click to expand...
Click to collapse
thanks for the reply
correct i do have drivers and adb in my PC and this is not my first time using adb commands. and yes i did bother reading many threads and using the search tool and found lots of great info but nothing pin pointing to the same problem im having with the phone not liking it when i turn my data on.
Btw i figure out why non of the GB roms were working, when i was doing the factory reset i was only doing it through streakmod recovery. but when i FR on the previous menu it worked.
i also made the diagnostic test through fastboot menu to test the sim and every thing else and everything is fine
Sorry for the late reply. I believe your data issues will resolve themselves by installing 407. From there you can install one of the custom ROMs.
hmm ok ill try that
Related
I am having soo much trouble with my new streak. I just bought a new one from Rogers in Canada. If anyone can lend a hand It would be very much appreciated because I am getting too frustrated I have spend the last 9 hours trying to fix this thing.
I have successfully rooted flashed ROM'd my N1 so I am familiar with adb and fastboot and I know very well now how to take out my battery but with this streak everything has been getting progressively worse.
problems in order of occerance
1. flashing lights
2. a notification your battery or charging cable may be damaged
3. cannot access the sd card from windows using the data cable(which worked before)
4.cannot install marketplace apps
5.no network signal
6.stuck at dell logo
Currently where I am at is I have a phone that will only sit at the dell screen.
1. I have tried clockwork recovery (new version getting a blank screen) and old clockwork (usable) I tried to do a nandroid recovery and it completes the recovery but doesn't do anything after a reboot
2. I tried to go to a stock recovery and stock 1.6 ROM and still a blank screen even though it accepts it.
rukcus said:
I am having soo much trouble with my new streak. I just bought a new one from Rogers in Canada. If anyone can lend a hand It would be very much appreciated because I am getting too frustrated I have spend the last 9 hours trying to fix this thing.
I have successfully rooted flashed ROM'd my N1 so I am familiar with adb and fastboot and I know very well now how to take out my battery but with this streak everything has been getting progressively worse.
problems in order of occerance
1. flashing lights
2. a notification your battery or charging cable may be damaged
3. cannot access the sd card from windows using the data cable(which worked before)
4.cannot install marketplace apps
5.no network signal
6.stuck at dell logo
Currently where I am at is I have a phone that will only sit at the dell screen.
1. I have tried clockwork recovery (new version getting a blank screen) and old clockwork (usable) I tried to do a nandroid recovery and it completes the recovery but doesn't do anything after a reboot
2. I tried to go to a stock recovery and stock 1.6 ROM and still a blank screen even though it accepts it.
Click to expand...
Click to collapse
you and me both man...have you made any headway?
should be easily fixable i would think if you can drop into irc channel #dellstreak on freenode
Not Android Development. Please post in the correct forum thanks
Moved to General
peace and thanks to DJ Steve...the single most helpful experience in all my online meandering as of late....get at him on IRC @rukcus
if you have a rebelsim , update it
then if you can fastboot > flash steve's original rom files
lufc said:
Not Android Development. Please post in the correct forum thanks
Moved to General
Click to expand...
Click to collapse
I would like to apply for a position of forum moderator, i thought the same thing.
they should make a button for that one lol
maybe a t-shirt as well while we're at it
All,
I've been rooting Droids for awhile, just got a streak, and I messed it up.
I tried to root it with superboot, and killed it ... regardless, was able to fix, and then tried a few ROMS, cannot get Cyanogenmod off .....
How can I get my streak back to the current AT&T 2.2 build that's out there.... I know ther are tutorials, but all seem to lead to a black screen for me .... please help
I had the same problem.
When I had the black screen, no logo, no nothing, I was still connected by USB. While the screen was still black I unplugged the USB and the phone came back to life in recovery mode.
Just a bit of info, try using QDLTool (repairtool) from http://streakdroid.com/?page_id=92
It reset me back to stock 2.2.
Just make sure you follow the Main tutorial instructions.
...
Well, figured it out on my own, thanks to those who replied.
Unbeknownst to me, the bootloader (recovery.img) that you use greatly impacts which .pkg files you can and cannot install.
So, for future reference, if anybody runs into my issue in the future, make certain you have the proper recovery.img file ... worked as soon as I figured that out.
zxschultz said:
All,
I've been rooting Droids for awhile, just got a streak, and I messed it up.
I tried to root it with superboot, and killed it ... regardless, was able to fix, and then tried a few ROMS, cannot get Cyanogenmod off .....
How can I get my streak back to the current AT&T 2.2 build that's out there.... I know ther are tutorials, but all seem to lead to a black screen for me .... please help
Click to expand...
Click to collapse
Not Android development
Please read THIS and post in the correct forums thank you
Moving to General
My full apologies in advance if there has been a similar thread, I've honestly been looking for the past couple of hours. If there is one and I've just missed it, feel free to open-fire on me.
I have an AT&T Atrix running on 2.3.4 Gingerbread; rooted and unlocked bootloader with the Alien 4 ROM and the Alien 4 Theme. I'm really new to rooting and have only been rooted for about a week now. Today though, I was going to trade my Atrix for an HTC Inspire. I used to have one, switched to the Atrix, and I've come to the conclusion that I prefer the Inspire. While wiping my personal info off of my phone, I did something I clearly shouldn't have though, and everything went downhill from there. Not really thinking, I had already wiped my SD card (which had the Alien ROM), and I still needed to clear off the phone itself, so I figured it'd be okay to just go to the Settings and wipe my phone through the Privacy option. When it booted back up I saw that almost all apps (including necessary ones like Phone and Browser, among others) were gone. I didn't think it'd be a problem and I could just download them again through the Market, but my Settings app was also gone, so I couldn't configure a Wifi connection. I couldn't configure anything. My SIM card didn't work either, nor did the SIM of the person I had met to trade for an Inspire.
When I got home, I went through the different options in Android Recovery on my phone... Still nothing. So I fired up RSDLite on the Windows 7 comp in the computer room, downloaded the 1.5.2 Atrix SBF from here to try and flash it back to the stock Atrix ROM, and clicked Start. My phone rebooted once or twice and it looked fine, but then RSD said that the flash had failed. Now whenever I try to turn my phone on, it stays at the big M logo with "Dual Core Technology" underneath (it doesn't even change to the pulsing M). I haven't been able to boot it up since... Sorry for the novel, but it'd be really greatly appreciated if someone could help me out here. Thanks for your time.
hayatohuseman said:
My full apologies in advance if there has been a similar thread, I've honestly been looking for the past couple of hours. If there is one and I've just missed it, feel free to open-fire on me.
I have an AT&T Atrix running on 2.3.4 Gingerbread; rooted and unlocked bootloader with the Alien 4 ROM and the Alien 4 Theme. I'm really new to rooting and have only been rooted for about a week now. Today though, I was going to trade my Atrix for an HTC Inspire. I used to have one, switched to the Atrix, and I've come to the conclusion that I prefer the Inspire. While wiping my personal info off of my phone, I did something I clearly shouldn't have though, and everything went downhill from there. Not really thinking, I had already wiped my SD card (which had the Alien ROM), and I still needed to clear off the phone itself, so I figured it'd be okay to just go to the Settings and wipe my phone through the Privacy option. When it booted back up I saw that almost all apps (including necessary ones like Phone and Browser, among others) were gone. I didn't think it'd be a problem and I could just download them again through the Market, but my Settings app was also gone, so I couldn't configure a Wifi connection. I couldn't configure anything. My SIM card didn't work either, nor did the SIM of the person I had met to trade for an Inspire.
When I got home, I went through the different options in Android Recovery on my phone... Still nothing. So I fired up RSDLite on the Windows 7 comp in the computer room, downloaded the 1.5.2 Atrix SBF from here to try and flash it back to the stock Atrix ROM, and clicked Start. My phone rebooted once or twice and it looked fine, but then RSD said that the flash had failed. Now whenever I try to turn my phone on, it stays at the big M logo with "Dual Core Technology" underneath (it doesn't even change to the pulsing M). I haven't been able to boot it up since... Sorry for the novel, but it'd be really greatly appreciated if someone could help me out here. Thanks for your time.
Click to expand...
Click to collapse
That definetly doesn't sound like a hard brick. Use romracers recovery and try to flash a fruitcake http://forum.xda-developers.com/showthread.php?t=1163009 which are much safer then sbfs.
By the way theres no need to apologize when posting in the "correct" forum .General or QandA is where this thread belongs. if this were development though then you'd be in a world of ****! LOL
if you are on big M (without any "failed to boot" ) you're soft bricked,
try to power on button+ volume down button...
if says "fastboot" then just volume up,
download the .img files in the fruitcakes section and follow the fastboot mode instructions...
you'll get back your phone.
read carefully the instruction where to put the files in your windows 7 user directory etc etc, 90% of the problem is because people don't understand where to place executables and run them
hope it helps
Thank you guys so much!! The solution was actually even simpler than what you both suggested; all I had to do was flash to 2.3.4 with moto-fastboot. I had never used fastboot before, so it took me forever to figure it out, but I finally got it and my Atrix is back to the way it came. Thanks again, you two. Cheers!
hayatohuseman said:
Thank you guys so much!! The solution was actually even simpler than what you both suggested; all I had to do was flash to 2.3.4 with moto-fastboot. I had never used fastboot before, so it took me forever to figure it out, but I finally got it and my Atrix is back to the way it came. Thanks again, you two. Cheers!
Click to expand...
Click to collapse
Kudos for doing some research and figuring out how to resolve the problem. Not enough of that going on. Doesn't it feel like more of an accomplishment?!
KeRmiT80 said:
follow the fastboot mode instructions...
you'll get back your phone.
Click to expand...
Click to collapse
hayatohuseman said:
all I had to do was flash to 2.3.4 with moto-fastboot
Click to expand...
Click to collapse
* 10chars
Hello All,
I have run into a problem with my Heroc not wanting to boot. Some background:
ROM: CM7
Kernal: Jaybob's recent Kernal
Mods: Firerats
All was fine and dandy until yesterday, when I decided to reboot the phone (with a full battery charge). The phone shutoff and when restarted was stuck at the HTC screen. I've tried several times to get into recovery but it hangs at the HTC Screen.
I can enter Fastboot/Hboot. I did some digging and tried to unroot by using this method: http://forum.xda-developers.com/showthread.php?t=988741
Method 1, loading the imaging on the sd root and loading. Everything loaded fine but when I reboot it still hangs at the HTC screen. I have not tried to RUU being that I am on a Mac and don't have access to a PC at the moment. So RUU will be done later tonight hopefully, but I don't expect different results.
It seems like I have some messed up memory and its not allowing me to boot. Does anyone know of a fix? I'm not desperate because its time for an upgrade. I just wanted to hold off on using it until January when Sprint holds their press conference, assuming its an Android device. I'd like to see what I could get versus the phones on the market now.
Any help is appreciated, thanks in advance
srkmagnus said:
Hello All,
I have run into a problem with my Heroc not wanting to boot. Some background:
ROM: CM7
Kernal: Jaybob's recent Kernal
Mods: Firerats
All was fine and dandy until yesterday, when I decided to reboot the phone (with a full battery charge). The phone shutoff and when restarted was stuck at the HTC screen. I've tried several times to get into recovery but it hangs at the HTC Screen.
I can enter Fastboot/Hboot. I did some digging and tried to unroot by using this method: http://forum.xda-developers.com/showthread.php?t=988741
Method 1, loading the imaging on the sd root and loading. Everything loaded fine but when I reboot it still hangs at the HTC screen. I have not tried to RUU being that I am on a Mac and don't have access to a PC at the moment. So RUU will be done later tonight hopefully, but I don't expect different results.
It seems like I have some messed up memory and its not allowing me to boot. Does anyone know of a fix? I'm not desperate because its time for an upgrade. I just wanted to hold off on using it until January when Sprint holds their press conference, assuming its an Android device. I'd like to see what I could get versus the phones on the market now.
Any help is appreciated, thanks in advance
Click to expand...
Click to collapse
You definitely need to do an RUU. No way around it. know it sucks starting fresh again but it'll solve all these problems you have. If your s-off you can also do the RUU from Hboot but it's better to do it from PC as I have learned. Good luck man.
thanks a lot! om going to give it a try later tonight when i have access to a pc. Im not so much worried about starting fresh than I am losing the phone and using my upgrade now... I have a curve laying around and started to thing about using that for a while until I see something I like.
i will report back tonight or tomorrow when i am up and running again.
I had the same problem awhile back and it took me forever to get it fixed but I finally got it fixed. Search the forum for " stuck at HTC screen and look for the threads I started for as possible fix. I will try to find it and post the link here.
http://forum.xda-developers.com/showthread.php?t=1305479&page=3
My last post describes how I finally fixed my Hero, but you should read the whole thread.
williams1978 said:
I had the same problem awhile back and it took me forever to get it fixed but I finally got it fixed. Search the forum for " stuck at HTC screen and look for the threads I started for as possible fix. I will try to find it and post the link here.
http://forum.xda-developers.com/showthread.php?t=1305479&page=3
My last post describes how I finally fixed my Hero, but you should read the whole thread.
Click to expand...
Click to collapse
Thanks. I will give it a look.
I read through the thread and it looks like you passed the black htc screen and got to the white one. I can't get passed the black and adb doesn't pick up the phone at this point. I'm still waiting to try the RUU and see if HTC sync picks up the device.
Very resourceful thread and I'll be sure to give all the suggestions a try before giving up.
HTC sync won't pick up the device and I don't think any other option will work since I don't have ADB access. I'm just gonna bite the bullet and look into a replacement.
Ok to verify your phone does boot at least to the bootloader? If so I have a doffeemr approach for you to take
私のEVO 3Dから送信される。
dastin1015 said:
Ok to verify your phone does boot at least to the bootloader? If so I have a doffeemr approach for you to take
私のEVO 3Dから送信される。
Click to expand...
Click to collapse
yeah. I can get into bootloader and fastboot. whatcha got?
I have a new phone on the way. Amazon has ET4G for $79, too good to pass up so I used my upgrade. Ill still be curious to know how I can get the Hero up and running.
srkmagnus said:
yeah. I can get into bootloader and fastboot. whatcha got?
I have a new phone on the way. Amazon has ET4G for $79, too good to pass up so I used my upgrade. Ill still be curious to know how I can get the Hero up and running.
Click to expand...
Click to collapse
Follow these instructions: http://forum.xda-developers.com/showthread.php?t=804692
I used a flashable RUU based off Flipz source and still no luck. I will give your RUU a try later tonight... Thanks
No luck. The phone freezes at the HTC screen and fails to go any further. :-(
srkmagnus said:
No luck. The phone freezes at the HTC screen and fails to go any further. :-(
Click to expand...
Click to collapse
i had same kinda deal from a bad radio flash
if you still have fastboot do
"fastboot erase system -w"
"fastboot oem boot heroc.hboot-1.46.2000.zip"
you may need to rename the file to HBOOT.
if that dose not work unzip the file take the hboot img and place on sdcard and place where your fastboot files are like in android/platform-tools.
this made a deference for me.
then try fastboot flash img hboot.img
this is what i went through here
http://forum.xda-developers.com/showthread.php?t=1086125
good luck if i can help let me know.
Thanks for the help oostah. I haven't been able to get ADB to recognize the device. When I get home I'll try it again and remove the hboot as suggested and give that a try.
Now that ICS is in beta for the Heroc my phone decides to crap out on me and I can't enjoy the hard work put in by the developers. Nonetheless, I am much appreciative of all the support put into the Heroc and have learned a lot from this community
I'll report back tonight with my results.
srkmagnus said:
Thanks for the help oostah. I haven't been able to get ADB to recognize the device. When I get home I'll try it again and remove the hboot as suggested and give that a try.
Now that ICS is in beta for the Heroc my phone decides to crap out on me and I can't enjoy the hard work put in by the developers. Nonetheless, I am much appreciative of all the support put into the Heroc and have learned a lot from this community
I'll report back tonight with my results.
Click to expand...
Click to collapse
you are welcome i have been there before.
your phone may not recognize ADB but it may still take fastboot commands. that was one thing that drove me crazy is that i could fastboot but not adb. let us all know how it goes.
I did "fastboot-mac devices" and got my device to show up, so it registered. however, when I go to erase system I get an error, "remote: not allowed". The same occurred when trying to flash the .zip and img files separately as suggested . At one point the devices started vibrating like crazy and shut off, the led started to blink green. I did get it back into Fastboot, but now it won't turn on.
Thanks for the help though It was already replaced and the new phone should be here tomorrow. I'm just going to miss the Hero since it was my first Android device and I learned a lot in this forum.
Thanks!
srkmagnus said:
I did "fastboot-mac devices" and got my device to show up, so it registered. however, when I go to erase system I get an error, "remote: not allowed". The same occurred when trying to flash the .zip and img files separately as suggested . At one point the devices started vibrating like crazy and shut off, the led started to blink green. I did get it back into Fastboot, but now it won't turn on.
Thanks for the help though It was already replaced and the new phone should be here tomorrow. I'm just going to miss the Hero since it was my first Android device and I learned a lot in this forum.
Thanks!
Click to expand...
Click to collapse
i still have one of my hero's that i let people play with when the come over. it still runs off wifi so they can play games yous gtalk what ever be nice to get it up and running for experience and fun lol now that your not in a have to mode.
do you have a nan back up from a sd card any place like on your pc if so look for your clockworkmod folder look for backups and you should see your backups open one of them you will see
boot
system
data
recovery
sd-ext
cache
they will be img files you can place them on your sd card and fastboot them back to the phone
"fastboot flash img boot.img"
"fastboot flash img system.img"
and so on
or
"fastboot boot img boot.img"
"fastboot boot img system.img"
and so on
or you can let it RIP
good to know. I'll give that a try if I can get it booted. I'm thinking its dead and needs a charge to get back into fastboot. I'd love to get it back up and running as a learning experience more than anything. I wont have time until tomorrow or Thursday . I will report back when I give it a try.
srkmagnus said:
good to know. I'll give that a try if I can get it booted. I'm thinking its dead and needs a charge to get back into fastboot. I'd love to get it back up and running as a learning experience more than anything. I wont have time until tomorrow or Thursday . I will report back when I give it a try.
Click to expand...
Click to collapse
will the charge light come on when plugged in if not there is a trick take a old usb cable cut one end off on the battery there are
= and - becare full connect the red wire to + and black to - tap them down so they dont move. let it set for 2 1/2 hrs should be good to go.
Hey guys so I am facing weird problems. I have searched through the forums either I cant find anything or I am too scared to do any more experiments I really dont want to loose my Razr M XT 907.
Problems
Laggy performance at times
Camera gets stuck when I take pictures at times then I have to restart.
when I reboot my phone it shows AP Fast boot screen, then I have to access boot menu and select the second last option (Console something). It always shows Null:Null and when I change it back the phone reboots normally
Phone hangs sometimes and then responds with everthing I have clicked all at once.
The screen on off button responds a second late
I think you guys can help me better if I tell you what I did to this phone exactly since I got this phone.
What I did
I initially bought this phone with defaul OS 4.0.1 in Pakistan.
I then installed a Verizon system update of 250 MB that got my phone stuck on a boot loop (and made me cry almost)
I restored my phone to the settings it came in using this procedure
http://www.andromods.com/tips-trick/how-to-restore-unroot-droid-razr-m-xt907-stock-original-firmware.html
The phone worked fine for 2 days but then I got that update prompt again and it got annoying so I though maybe If i upgrade it to JB using the same RSD Lite method but a different ROM that may solve it.
So I applied the above Procedure using this ROM
http://forum.xda-developers.com/showthread.php?t=2250155
The method showed as Passed on RSD Lite but the phone got stuck on bootloop again so I paniced and tried restoring my phone abck to ICS using the method mention in the first link provided.
Then the phone got stuck on AP Boot Menu
Then I used DROID_RAZR_M_Utility_1.20 and used both methods 1 and two but it didnt work
Then out of the blue I went to the boot menu and I saw an option Switch Console (Null:null) I pressed up key on and null null changed to default:tty something it and the phone booted up just fine back to ICS
Now everytime I power off the phone it goes to AP Boot menu showing FASTBOOT REASON: Sticky bit factory_fastboot and I have to do the above to restart the phone.
What I need
Please help me restore my phone I dont want to brick it, I am a simple user I will need step by step guide
Anyone ?
Bump
Bump still looking for a solution
I have CM10 on mine and the camera is completely broken
Enter fastboot oem fb_mode_clear and problem gone.
v0ltage112 said:
Hey guys so I am facing weird problems. I have searched through the forums either I cant find anything or I am too scared to do any more experiments I really dont want to loose my Razr M XT 907.
Problems
Laggy performance at times
Camera gets stuck when I take pictures at times then I have to restart.
when I reboot my phone it shows AP Fast boot screen, then I have to access boot menu and select the second last option (Console something). It always shows Null:Null and when I change it back the phone reboots normally
Phone hangs sometimes and then responds with everthing I have clicked all at once.
The screen on off button responds a second late
I think you guys can help me better if I tell you what I did to this phone exactly since I got this phone.
What I did
I initially bought this phone with defaul OS 4.0.1 in Pakistan.
I then installed a Verizon system update of 250 MB that got my phone stuck on a boot loop (and made me cry almost)
I restored my phone to the settings it came in using this procedure
http://www.andromods.com/tips-trick/how-to-restore-unroot-droid-razr-m-xt907-stock-original-firmware.html
The phone worked fine for 2 days but then I got that update prompt again and it got annoying so I though maybe If i upgrade it to JB using the same RSD Lite method but a different ROM that may solve it.
So I applied the above Procedure using this ROM
http://forum.xda-developers.com/showthread.php?t=2250155
The method showed as Passed on RSD Lite but the phone got stuck on bootloop again so I paniced and tried restoring my phone abck to ICS using the method mention in the first link provided.
Then the phone got stuck on AP Boot Menu
Then I used DROID_RAZR_M_Utility_1.20 and used both methods 1 and two but it didnt work
Then out of the blue I went to the boot menu and I saw an option Switch Console (Null:null) I pressed up key on and null null changed to default:tty something it and the phone booted up just fine back to ICS
Now everytime I power off the phone it goes to AP Boot menu showing FASTBOOT REASON: Sticky bit factory_fastboot and I have to do the above to restart the phone.
What I need
Please help me restore my phone I dont want to brick it, I am a simple user I will need step by step guide
Anyone ?
Click to expand...
Click to collapse
I have solution but the android you will flash is android kitkat i don know if do u want reply me if u want to unbrick note: kitkat not supported root
lulz
Adriantech said:
I have solution but the android you will flash is android kitkat i don know if do u want reply me if u want to unbrick note: kitkat not supported root
Click to expand...
Click to collapse
Dude.. you know that you're responding to a thread that is literally a year old right?
cliMAKtic said:
Dude.. you know that you're responding to a thread that is literally a year old right?
Click to expand...
Click to collapse
And wath is the problem i cant help?
Adriantech said:
I have solution but the android you will flash is android kitkat i don know if do u want reply me if u want to unbrick note: kitkat not supported root
Click to expand...
Click to collapse
I also have a solution, but you would need another phone...
But as cliMAKtic said, it's most likely way too late now. Same goes for your replies in other threads.
Adriantech said:
And wath is the problem i cant help?
Click to expand...
Click to collapse
You can, but I'm afraid you won't. You'll rather achieve the opposite by bringing obsoleted threads back to the top.
lem22 said:
I also have a solution, but you would need another phone...
But as cliMAKtic said, it's most likely way too late now. Same goes for your replies in other threads.
You can, but I'm afraid you won't. You'll rather achieve the opposite by bringing obsoleted threads back to the top.
Click to expand...
Click to collapse
ok