Post ur highest benchmark scores below. Please state rom and overclock speed if possible
I've got 1308 using cm7.1 stable on 806 MHz
( Quadrant Advanced. )
Sent from my Blade using xda premium
IceCream_Sandwich said:
Post ur highest benchmark scores below. Please state rom and overclock speed if possible
I've got 1308 using cm7.1 stable on 806 MHz
( Quadrant Advanced. )
Sent from my Blade using xda premium
Click to expand...
Click to collapse
plz use antutu quadrant is a big s***
if i am correct last time i did a benchmark with the not so accurate antutu it was 1505 if im corrent
1) 748mhz OC
2) GPU OC
3) New Adreno Libs
4) Bravia Engine Hack
5) Wbaw`s Kernel
6) CM7 Kang latest Build By Burgerz
Will try again once i set up my phone again
can anybody please benchmark this fast?
pls say scores of these:
nenamark 2
neocore
linpack
bechmark pi
I use antutu and my highest score is 1370 with 691 MHz
P.S. How do you overclock GPU?
what is new adreno libs?
yash_p90 said:
I use antutu and my highest score is 1370 with 691 MHz
P.S. How do you overclock GPU?
what is new adreno libs?
Click to expand...
Click to collapse
Overclocking the GPU isnt possible manually, its part of the kernel (I think)
The new adreno libs are drivers released for ur adreno gpu by the manufacturer, Qualcomm. The ICS libs have been implemented directly into the ICS Tom's whereas the Adreno200 libs have a flashable zip.
Btw 1390 with Antutu is quite low. What rom are u on?
QuantumFoam said:
Overclocking the GPU isnt possible manually, its part of the kernel (I think)
The new adreno libs are drivers released for ur adreno gpu by the manufacturer, Qualcomm. The ICS libs have been implemented directly into the ICS Tom's whereas the Adreno200 libs have a flashable zip.
Btw 1390 with Antutu is quite low. What rom are u on?
Click to expand...
Click to collapse
The latest cm7 nightly (2012-04-20)
1370 btw. I noticed that if i increase clock speed, then i get a better score.
w00t
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yash_p90 said:
w00t
Click to expand...
Click to collapse
That's low. I get 1600 on Antutu
QuantumFoam said:
That's low. I get 1600 on Antutu
Click to expand...
Click to collapse
can you send a screenshot for me to compare?
I don't have all the mods currently installed. Ask karthiknr if he has an old screenshot. He gets 1600 too
1685
Sent from my ZTE-BLADE using XDA
Nice. Which rom
Swedish snow rls7
Sent from my ZTE-BLADE using XDA
1882
CM 7.2 RC1+new libs
PS 2 guys from China with CPU speed 1.5 GHz Is it possible?
Which libs are u using?
No its not possible. The Blade has an arm6 CPU of 600 MHz. Clocking it to 844 MHz causes reboots. Clocking to 1500 (which is theoretically impossible since no kernel supports that) will literally cause the phone to explode
Libs from this topic.
Nice!!!! I get only 1600
Blade is my first: smartphone, touch phone, android device, i bought him only 5 days ago and i already love it
1713
With adreno libs....
CM 7.2 RC3
O/C 710
Related
This is for those who are using overclocked kernels..Thanx to fugumod and other kernels that we can now overclock our G3 !
Please share the "setcpu profiles" you are using and the "BATTERY EXPERIENCE" with them..
This will help other users to get the most out of their phones
These are my profiles...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
to bad nobody else added some profiles here i was searching for more information about this topic ..
here is mine
vikraam said:
here is mine
Click to expand...
Click to collapse
I suppose its Fugumod right?? 2.4 800 MHz edition?? How much battery bakup do you get with these profiles with normal usage??
vikraam said:
here is mine
Click to expand...
Click to collapse
dhirend_6d said:
I suppose its Fugumod right?? 2.4 800 MHz edition?? How much battery bakup do you get with these profiles with normal usage??
Click to expand...
Click to collapse
Sorry, didn t see your signature at first. You have ultra edition. How much battery backup do you get with normal usage??
dhirend_6d said:
I suppose its Fugumod right?? 2.4 800 MHz edition?? How much battery bakup do you get with these profiles with normal usage??
Click to expand...
Click to collapse
Its fugumod ultra pre release which was posted by pwng3
with normal usage i get one and half day
My profiles:
Battery: I got 2 full days with those profiles with normal usage.
Can I use setcpu on my rooted apollo, or do I need to have a special kernel?
SparkyRih said:
Can I use setcpu on my rooted apollo, or do I need to have a special kernel?
Click to expand...
Click to collapse
You can install but you can t use it for anything. . You need to flash an OC kernel in order to OC.
Just changed the values in SetCPU. I will post soon how the battery life is.
dhirend_6d said:
You can install what you can t use it for anything. . You need to flash an OC kernel in order to OC.
Click to expand...
Click to collapse
Yeah, I was scared that would be the case
Thank you for your answer
Need Help
Hey Guys,
I am new to the Forum, I Have flashed with Indroid 4.3 Darkfroyo(Hyper Mix). Now I need to flash my Kernel with Fugumod Ultra. Can someone tell me how to flash the Fugumod ultra O.C edition to my galaxy 3 apollo. Please help me .
anukuttan said:
Hey Guys,
I am new to the Forum, I Have flashed with Indroid 4.3 Darkfroyo(Hyper Mix). Now I need to flash my Kernel with Fugumod Ultra. Can someone tell me how to flash the Fugumod ultra O.C edition to my galaxy 3 apollo. Please help me .
Click to expand...
Click to collapse
There is an update.zip for it in the fourth page of that thread http://forum.xda-developers.com/showthread.php?t=1134369&page=4
Thanks to this post my phones battery is going to last a lot longer May i ask, how do you take a screenshot on your phone?
I use G3Mod Ultimate 1.3.4 200-1200 Mhz and I keep it simple
I have just one option enabled in profile, which is if temp > 40 clock 200-400 conservative
Rest I have kept it at 200-800 Mhz On Demand at all times.
When I play Games I set it to 600-1200 On Demand.
I have been using it since 1.3.4 G3Mod Ultimate was released, and have not faced any Overheating, Lags, freezes what so ever. It does last around 1.5 to 2 days.
My quadrant score (ofcourse other tweaks as mentioned in my signature also applies)
at 600-800 on demand is around 590
at 600-1200 on demand is around 710
Smonic said:
Thanks to this post my phones battery is going to last a lot longer May i ask, how do you take a screenshot on your phone?
Click to expand...
Click to collapse
You can search Market for apk named Screenshot IT
Or you can just hold down the back button and press the home key for a screen shot
Sent from my GT-I5800 using Tapatalk
Best way of taking screenshot is through Qtadb
It can take screenshots in any apps
back key+home doesnt work in some apps
For those who don't have ATT phones, it would be greatly appreciated if those who do have ATT phones flex their kernel/build/rom!
List your clock speed, kernel, firmware, and your benchmark results. Test with a static wallpaper as live wallpapers slow down your phone.
Cheers
I'm bell 2.2.2 so everything is boring
Smartbench: 2650 productivity
2500 gaming
Quad: 2550
1.1 ghz using faux123 kernel on 4.1.26, benchmarks via smartbench are consistently around 3100.
Sent from my MB860 using XDA App
I don't have an ATT Atrix but I will share it with the results. Stock UK T-mobile no OC.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2900 android 2.3.4
Sent from my MB860 using XDA App
Scoring 2700 using 4.5.91 (Att's Android 2.3.4) also using stick kernel
Enviado desde mi MB860 usando XDA Premium App
2600 average with smartbench. Version 4.5.91. Stock kernel.
Great guys,
Just remember, post your kernel/clock speed/firmware/benchmark app/score. every piece is needed
thanks
2999 highest quadrant, avg. 2800.
SmartBench 2800/2400
Stock Stock unrooted Bell.
Motorola Atrix 1.0 ghz AT&T
1. using on Android 2.2.2 , NB 4.1.83, benchmark via quadrant around 1817.
2. using on Android 2.3.4 , HKTW , benchmark via quadrant around 2200.
2. using on Android 2.3.4 , 4.5.91 Beta 3, benchmark via quadrant around 2269.
3. using on Android 2.3.4 , 4.5.91 Beta 3 , benchmark via smartbench scored around 3109.
Stock 4.2.11 FR (OYLEM_U4_2.1.1)
quadrant: 2718
cf-bench: 9083-2434-5093
linpack: 41.32/69.41
Testing sig
.83 Gladiatrix
Quadrant 2600-2700
Smartbench 2800 production
2400 gaming
Sent from my MB860 using XDA Premium App
2.3.4 (4.5.91 Beta 4.5 Kenn's ROM) -- quadrant score: 2250-2300
Foka002 said:
I don't have an ATT Atrix but I will share it with the results. Stock UK T-mobile no OC.
Click to expand...
Click to collapse
Can i ask how you got a stock UK Tmobile atrix? I thought they were exclusive to Orange?
Sent from my HTC Desire using XDA App
Bump 10char
I'm on stock AT&T 4.5.91 OTA update with an unlocked bootloader (I'm one of those that can't flash back via SBF until a solution is found to the hard brick problem.
I ran SmartBench three times:
3227 / 2667
3007 / 2561
3113 / 2648
I've attached a screenshot of my highest test.
DK
2.3.4 highest: smart bench 3700/2900?!?! Average 3100/2750
Quadrant highest 2850 average 2600
when i was in1.52 and use one chinese rom，i run about 2600~3100.
after i flashed 1.83 and use GBV4，i can only run about 2500~2900.
DeathKoil said:
I'm on stock AT&T 4.5.91 OTA update with an unlocked bootloader (I'm one of those that can't flash back via SBF until a solution is found to the hard brick problem.
I ran SmartBench three times:
3227 / 2667
3007 / 2561
3113 / 2648
I've attached a screenshot of my highest test.
DK
Click to expand...
Click to collapse
Hope a solution will be found soon for your guys who got AT&T 4.5.91 OTA update..
Motorola Atrix 1.0 ghz AT&T
using on Android 2.3.4 , 4.5.91 Beta 3 , quadrand advnce 2700Avg.
Hi All,
This is a CM9 original kanged kernel and jcsullins 3.0.8 kernel, just OCed upto 1512 MHz by default
Default Clocks
Max: 1512 MHz
Min: 192 MHz
Governor: Interactive
This kernel is purely just compiled by me, using cm9 tenderloin kernel base and version 3.0.8 from jcsullins github source.
All credits goes to CM_team,dalingrin,jcsullins,yjwong and all who contributed to make this awesome ICS possible for our Touchpad
Download: Mediafire
NOTE: It does not change your default boot, or name under moboot menu. All remain as it is, just you get faster speeds .
Kernel 3.0 is untested and work in progress, and constantly developing do not download version 3.
Can't wait too install, ill let u know how it goes......
ツ
Installed an running ultra smoothly. . . .
No complaints. . . .
Sent from CM9 ICS HP Touchpad
amazing work men
please gpu oc in next build
Gpu oc = more heat and load, less battery. Not a preferred way.
It's just a Kang from source, learning tweaks.
Just installed this ...seems to be working fine. Ran antu benchmark 5792 score.
Great work! Thanks for another kernel to play with - attempted Bicked Kernel and kept getting SODs and reboots, flashed back to stock CM9 kernel.
Will report back.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wooooow amazing
Sent from my SGH-T989 using xda premium
Working great thus far, no SODs or random reboots. Just ran Quadrant - I got a 3212.
Great work with the kernel - love the development community for our TPs. I don't regret the purchase one bit.
Thanks again.
Grate work dude. Keep it up
Is there any flashable wipe (i.e. superwipe.zip) that will wipe everything including ROM, tweaks, MODs and kernel?
Because I am still having few problems with alpha 2 (WiFi) and just by using recovery is not removing everything (i.e Bricked kernel)
Thank you,
Sent from my Desire HD
ATZ-007 said:
Grate work dude. Keep it up
Is there any flashable wipe (i.e. superwipe.zip) that will wipe everything including ROM, tweaks, MODs and kernel?
Because I am still having few problems with alpha 2 (WiFi) and just by using recovery is not removing everything (i.e Bricked kernel)
Thank you,
Sent from my Desire HD
Click to expand...
Click to collapse
ACMEUninstaller wipe everything android. Maybe that will be useful. But instead I suggest you flash update-ath6kl-v2.6-for-alpha2.zip http://techerrata.com/browse/cm/touchpad/misc file after rom install.
Bump for a great solution to oc your setup! Mine has been working flawless for over a week.. Seems to have a fairly dramatic battery increase as well.
Sent from my SPH-D710 using XDA
Would anyone like to have burning hot 3.0.8 Kernel(WIP-extremely experimental)?
I do not know if it would work or not, but if there are people asking to try, I could compile one from jcsullins source.
All thanks to jcsullins (extremely talented moboot developer).
bhanvadia said:
Would anyone like to have burning hot 3.0.8 Kernel(WIP-extremely experimental)?
I do not know if it would work or not, but if there are people asking to try, I could compile one from jcsullins source.
All thanks to jcsullins (extremely talented moboot developer).
Click to expand...
Click to collapse
As long as burning hot does not have an extremely overclocked kernel that makes the Touchpad a hotpad
kingtuk1 said:
As long as burning hot does not have an extremely overclocked kernel that makes the Touchpad a hotpad
Click to expand...
Click to collapse
Nothing more than 1512 MHz, only thing burning hot I mean was LATEST Work-In-Progress.
bhanvadia said:
Nothing more than 1512 MHz, only thing burning hot I mean was LATEST Work-In-Progress.
Click to expand...
Click to collapse
I would enjoy messing with it D:
Posted latest kernel 3.0.8 in my mediafire folder.
http://www.mediafire.com/bhanvadia
kernel 3.0.8 is it something that dalingrin is working on or something else?
edit:kernel 3.0.8 doesnt work on latest cm9 nithgly build
nikos5800 said:
kernel 3.0.8 is it something that dalingrin is working on or something else?
edit:kernel 3.0.8 doesnt work on latest cm9 nithgly build
Click to expand...
Click to collapse
Thanks for testing.
Trying to get new kernel 3.0.8
dalingrin, jcsullins(genius behind moboot development) and many more are working on new kernel 3.0.8.
EDIT: New kernel updated into mediafire.
What is the difference of installing this kernal or using Rom Toolbox and simply overclocking?
Hi people!
I make all!!!! roms in benchmark in one thread like on previous phone magic:http://forum.xda-developers.com/showthread.php?t=885104? How about that?
My procedure:
Code:
1. Flash the rom by Mag and CWM 5.2.6
2. Skip Setup Wizard as much as possible.
3. Install Quadrant Advanced Edition 2.1.1 by Android Commander.
4. Reboot
5. Test via Quadrant
6. Make photo by Adroid Commander.
7. End
Seriously I will test about all roms from 3 pages.
arkat_double_sense_v3.0_[eu_magldr]
Score: 920
http://img854.imageshack.us/img854/2600/test1ig.png
Score:926
http://img843.imageshack.us/img843/2244/test2xg.png
Score:950
http://img521.imageshack.us/img521/7751/test3ml.png
Dorimanx-Rom-3.1.9-Nightly-277-All-in-One
Score: 970
http://img594.imageshack.us/img594/8393/screenyo.png
eclipse_3.15_full
Score: 902
http://img204.imageshack.us/img204/2843/test1ur.png
Score: 671
http://img546.imageshack.us/img546/6595/test2tf.png
Score: 721
http://img213.imageshack.us/img213/963/test3ke.png
EvoHd2v70-2b
Score: 922
http://img844.imageshack.us/img844/307/screentk.png
Score: 874
http://img802.imageshack.us/img802/870/screenshot2012061611104.png
Score: 897
http://img140.imageshack.us/img140/2199/screenshot2012061611165.png
Galaxy HD2 GB2.3.7 with TouchWiz4.5
Score: 1018
http://img832.imageshack.us/img832/428/screenshot1339792030536.png
hyperdroid_cm7_sandyscorpion_v6.0.0_magldr
Score: 966
http://img862.imageshack.us/img862/2526/test1c.png
Score: 988
http://img703.imageshack.us/img703/6253/test2zu.png
Score: 1009
http://img62.imageshack.us/img62/9593/test3vr.png
IceCreamTosti_v1.2_B37_beta
Score: 1022
http://img577.imageshack.us/img577/262/dscn2035t.jpg
Score: 1028
http://img201.imageshack.us/img201/2078/dscn2038z.jpg
Score: 1031
http://img822.imageshack.us/img822/74/dscn2040q.jpg
mwakiousROM_1.0_MAGLDR
Score: 792
http://img837.imageshack.us/img837/9807/screenvnx.png
mwakiousRUNNINGrom_v.8.3_Poseidon_multi
Score: 906
http://img641.imageshack.us/img641/4939/test1ya.png
Score: 988
http://img580.imageshack.us/img580/263/test2va.png
Score: 997
http://img59.imageshack.us/img59/5462/test3sb.png
myMIUI_v14_b4_zipA
Score: 1060
http://img507.imageshack.us/img507/9753/dscn2033j.jpg
NDT_MIUI_GINGER_2.3.7_DEVELOPMENT_V48.0_MAGLDR_Tytung_kernel
Score: 1067
http://img225.imageshack.us/img225/3653/screenor.png
NexusHD2-ICS-CM9-HWA_V2.3
Score: 1053
http://img256.imageshack.us/img256/9104/screenshot2012061521503.png
paranoidandroid_hd2_v1.2a
Score: 1064
http://img855.imageshack.us/img855/992/screenshot2012061521283.png
SENSATION XL ROM AIO V 3.0
Score: 902
http://img849.imageshack.us/img849/8959/dscn2031u.jpg
TyphooN_CM7_v3.8.4-MAGLDR
Score: 1099
http://img594.imageshack.us/img594/2663/test1qg.png
Score: 1090
http://img233.imageshack.us/img233/7332/test2kw.png
Score: 1088
http://img26.imageshack.us/img26/4783/test3qs.png
UrDroid_2.6_NO_AROMA_marc1706_0.2.1_kernel
Score: 968
http://img221.imageshack.us/img221/7906/test1oj.png
Score: 1004
http://img853.imageshack.us/img853/6778/test2nq.png
Score: 1004
http://img651.imageshack.us/img651/6186/scree3n.png
re
Quadrant from my New Rom RC6.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pixelfreak
i think you are in the wrong section dude, but great idea, be carefull about bad blocks
benchmarks are just numbers the benchmark for ics is lower than gingerbread but ask anyone who used both they say ics is way better, but anyways nice gesture
Ok I tested some roms today. Tommorow will be more ofc
marcimix said:
Hi people!
I make all!!!! roms in benchmark in one thread like on previous phone magic:http://forum.xda-developers.com/showthread.php?t=885104? How about that?
My procedure:
Code:
1. Flash the rom by Mag and CWM 5.2.6
2. Skip Setup Wizard as much as possible.
3. Install Quadrant Advanced Edition 2.1.1 by Android Commander.
4. Reboot
5. Test via Quadrant
6. Make photo by Adroid Commander.
7. End
Seriously I will test about all roms from 3 pages.
Some samples is up for today:
Dorimanx-Rom-3.1.9-Nightly-277-All-in-One
Score: 970
http://img594.imageshack.us/img594/8393/screenyo.png
EvoHd2v70-2b
Score: 922
http://img844.imageshack.us/img844/307/screentk.png
Galaxy HD2 GB2.3.7 with TouchWiz4.5
Score: 1018
http://img832.imageshack.us/img832/428/screenshot1339792030536.png
mwakiousROM_1.0_MAGLDR
Score: 792
http://img837.imageshack.us/img837/9807/screenvnx.png
myMIUI_v14_b4_zipA
Score: 1060
http://img507.imageshack.us/img507/9753/dscn2033j.jpg
NDT_MIUI_GINGER_2.3.7_DEVELOPMENT_V48.0_MAGLDR_Tytung_kernel
Score: 1067
http://img225.imageshack.us/img225/3653/screenor.png
NexusHD2-ICS-CM9-HWA_V2.3
Score: 1053
http://img256.imageshack.us/img256/9104/screenshot2012061521503.png
paranoidandroid_hd2_v1.2a
Score: 1064
http://img855.imageshack.us/img855/992/screenshot2012061521283.png
SENSATION XL ROM AIO V 3.0
Score: 902
http://img849.imageshack.us/img849/8959/dscn2031u.jpg
Click to expand...
Click to collapse
dont know where u get score of 970 for dorimanx i get score of 1600 with quadrant
maddoc1007 said:
dont know where u get score of 970 for dorimanx i get score of 1600 with quadrant
Click to expand...
Click to collapse
It depends on the version of the app I think. There are different versions for GB and ICS. On ICS scores of 1600 are pretty decent (an HD2 definitely couldn't manage it)
The thread is in the wrong forum m8.
Btw, you should do the benchmark 3 times before posting the results for more accurate results.
YZ.
YZ said:
The thread is in the wrong forum m8.
Btw, you should do the benchmark 3 times before posting the results for more accurate results.
YZ.
Click to expand...
Click to collapse
+1
Moreover, i think it's pointless. Great idea, but pointless.
Benchmark i only a number. It's not a PC or even laptop, where you have to have decent performance to, let's just say, render a model.
In smartphones it's about usability, stability and feel. And these can't be measured by a simple benchmark.
YZ said:
The thread is in the wrong forum m8.
YZ.
Click to expand...
Click to collapse
You're a forum moderator, just in case you forgot
Sent from my NexusHD2 using XDA
maddoc1007 said:
dont know where u get score of 970 for dorimanx i get score of 1600 with quadrant
Click to expand...
Click to collapse
+1 on that
Benchmarking roms is useless and a bit boring imo, but if someone finds it funny... At least it should be done better!
The dorimanx for example must be tested with tweaks on it or you have a fake score!
The funny thing is that some dorimanx tweaks distort benchmarks
+1 YZ : Please move this 3d in the right section
@latest CM11 nightly & delvik runtime
Version information
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Score
Mine: 44k Trinity kernel. Antutu v5 beta 1. Will post later for score in Antutu v5 final
BlackSoulxxx said:
Mine: 44k Trinity kernel. Antutu v5 beta 1. Will post later for score in Antutu v5 final
Click to expand...
Click to collapse
I don't know why I can get only 2000+ "android runtime" score in [email protected] as I can get 3000+ in official stock.
That caused my score only 38000~39000...
AlexWater said:
I don't know why I can get only 2000+ "android runtime" score in [email protected] as I can get 3000+ in official stock.
That caused my score only 38000~39000...
Click to expand...
Click to collapse
Ok. Google "Optimized Dalvik" and install it. Why? Because Qualcomm have made a special dalvik version to maximize the power of Snapdragon. And this is for only stock ROM, not AOSP. CM using normal version so it's dont use the full power of our phone
Optimized dalvik is faster than ART too
BlackSoulxxx said:
Ok. Google "Optimized Dalvik" and install it. Why? Because Qualcomm have made a special dalvik version to maximize the power of Snapdragon. And this is for only stock ROM, not AOSP. CM using normal version so it's dont use the full power of our phone
Optimized dalvik is faster than ART too
Click to expand...
Click to collapse
yaeh i know that patch,but i got 3000+ runtime score(it's a normal score,i dont know the patched score) without it in stock rom.And they say the patch/function is included in CM rom so this patch can not be installed in CM/ASOP rom,but i dont know if it's true.
AlexWater said:
yaeh i know that patch,but i got 3000+ runtime score(it's a normal score,i dont know the patched score) without it in stock rom.And they say the patch/function is included in CM rom so this patch can not be installed in CM/ASOP rom,but i dont know if it's true.
Click to expand...
Click to collapse
Cm already include this optimised dalvik runtime in there official builds and nightlies
Score = 38,793
Android 4.4.4, .108 fw, RomAur 9.1, Trinity kernel 2.3, overclocked to 2.8 GHz.
guys maybe its a irrelevant question.sry for that
but how you guys overclock the z1 to have 44K score?!!??
i adjusted min:1.3 max:2.8 performance/dancedance/smatassV2 gpu freq @ 650Mhz and antutu score was 32K !!
using f(X)trinityVengenceRom and trinity kernel v 2.3 !
anyone can help me with this?!
NiM72NiK said:
guys maybe its a irrelevant question.sry for that
but how you guys overclock the z1 to have 44K score?!!??
i adjusted min:1.3 max:2.8 performance/dancedance/smatassV2 gpu freq @ 650Mhz and antutu score was 32K !!
using f(X)trinityVengenceRom and trinity kernel v 2.3 !
anyone can help me with this?!
Click to expand...
Click to collapse
Seems unfathomable LOL overclocked but gave lower score than stock :laugh:
Did you test after a fresh reboot?
I can't think of any scenario where a z1 should be scoring under 35k, fresh out the box is usually 37-38k
Kendosis said:
Seems unfathomable LOL overclocked but gave lower score than stock :laugh:
Did you test after a fresh reboot?
I can't think of any scenario where a z1 should be scoring under 35k, fresh out the box is usually 37-38k
Click to expand...
Click to collapse
u sure about it?! me and 2 of my friends and my dad have z1 none of us had a score higher than 34K !! 37-38K is for z2 as i know!
NiM72NiK said:
u sure about it?! me and 2 of my friends and my dad have z1 none of us had a score higher than 34K !! 37-38K is for z2 as i know!
Click to expand...
Click to collapse
Yeah the highest I managed to get with a Z1 at 2.8 GHz CPU, 650 MHz GPU, performance mode, all cores forced on etc was 39k. Stock was about 33k.
LOL, I think my setting it's simple, none of you guys haven't testing and tuning and setting again?
So far with my record , our device is 4th place, still behind MIPAD (tegra K1), 1+1 and some chinese tablet (damm they are fast, but without thermal throtting and cheat )
BlackSoulxxx said:
LOL, I think my setting it's simple, none of you guys haven't testing and tuning and setting again?
So far with my record , our device is 4th place, still behind MIPAD (tegra K1), 1+1 and some chinese tablet (damm they are fast, but without thermal throtting and cheat )
Click to expand...
Click to collapse
What have you done that others haven't? Is it just the runtime?
Hey guys, test on Antutu v5 final
44k again
BlackSoulxxx said:
Hey guys, test on Antutu v5 final
44k again
Click to expand...
Click to collapse
Care to share what are you doing to get such a high score?
I am on 37K!
BlackSoulxxx said:
Hey guys, test on Antutu v5 final
44k again
Click to expand...
Click to collapse
what do you do to get this score? would you like to share it with us?!
NiM72NiK said:
u sure about it?! me and 2 of my friends and my dad have z1 none of us had a score higher than 34K !! 37-38K is for z2 as i know!
Click to expand...
Click to collapse
Upgrade ANTUTU 5.0.
34K is a former version score.Maybe u can get 37~39K in the latest version @default frequency like me.
My setting? Criskelo or KitSlim AMG, trinity kernel 1.9 (lol if 2.3 was fixed buggy oc I swear that I will achieve 47k ), KSM, slightly oc and vr 4096. Also some private tweak....
BlackSoulxxx said:
My setting? Criskelo or KitSlim AMG, trinity kernel 1.9 (lol if 2.3 was fixed buggy oc I swear that I will achieve 47k ), KSM, slightly oc and vr 4096. Also some private tweak....
Click to expand...
Click to collapse
Did u get a higher score with KSM enabled?I dont know if KSM is useful for a 2GB ram device like Z1...
nearly 38500
I got nearly 38500, but how did you get over 4+