Database Users

B528 Root Help Me ! :(

hi b528 instaled my phone
my not root b528 help pls

try this
http://forum.xda-developers.com/showthread.php?t=1321582

Beter try this:
http://forum.xda-developers.com/showpost.php?p=23214568&postcount=1215
Im was riting by this method.

not work ((

mstbk1300 said:
not work ((
Click to expand...
Click to collapse
Use superOne Click v2.3.1
it will root your phone for sure.
Instructions here:
http://forum.xda-developers.com/showthread.php?t=1420728

I thought B528 could not be rooted yet?

B528 Root
1.Settings-> Applications -> Developer Tools-on
2.Unknown sources -> Settings-> Applications -> Unknown sources-on.
3.Fast boot -> Settings-> Applications-off
4.Dial: *#*#2846579#*#*
5. Go to projectmenu > background settings > log settings > log switch > set Log on
6.log setting-dump & log-on.(open dump & log, turn on all items (dump & log is located in the backGroundSetting))Check the correctness of the installation ADB drivers.Connect your phone to your computer, or in a memory device driver manager, adb will not be displayed.
Open Device Manager (right book. On "Computer" - Properties)
Scroll down the list of equipment "Android"
Right-click on it - properties - update driver - search your computer - select a driver from a list of device.You can try these drivers
7.Reboot Phone
Download B528_ROOT
8. Run B528_root.bat
9. Your phone should now be Rooted.
10. You can now go back *#*#2846579#*#* and turn logging off if you want.

Igory0k said:
1.Settings-> Applications -> Developer Tools-on
2.Unknown sources -> Settings-> Applications -> Unknown sources-on.
3.Fast boot -> Settings-> Applications-off
4.Dial: *#*#2846579#*#*
5. Go to projectmenu > background settings > log settings > log switch > set Log on
6.log setting-dump & log-on
7.Reboot Phone
Download B528_ROOT
8. Run B528_root.bat
9. Your phone should now be Rooted.
10. You can now go back *#*#2846579#*#* and turn logging off if you want.
Click to expand...
Click to collapse
So, is this working?

Works fine for me.

What exactly does "log on" do ?

Tmp341 said:
What exactly does "log on" do ?
Click to expand...
Click to collapse
open dump & log, turn on all items (dump & log is located in the backGroundSetting) "

Igory0k said:
1.Settings-> Applications -> Developer Tools-on
2.Unknown sources -> Settings-> Applications -> Unknown sources-on.
3.Fast boot -> Settings-> Applications-off
4.Dial: *#*#2846579#*#*
5. Go to projectmenu > background settings > log settings > log switch > set Log on
6.log setting-dump & log-on
7.Reboot Phone
Download B528_ROOT
8. Run B528_root.bat
9. Your phone should now be Rooted.
10. You can now go back *#*#2846579#*#* and turn logging off if you want.
Click to expand...
Click to collapse
Thanks!
this is only working method(I have mac and run .bat commands in terminal)

How long does it take to root the phone with this method ?
I tried this several times, but i can't get passed this:
-flash the rooted bootimage
<waiting for device>
Last time i waited 45 minutes

Kawadude said:
How long does it take to root the phone with this method ?
Click to expand...
Click to collapse
About 3 minutes. Check the correctness of the installation ADB drivers.

Igory0k said:
1.Settings-> Applications -> Developer Tools-on
2.Unknown sources -> Settings-> Applications -> Unknown sources-on.
3.Fast boot -> Settings-> Applications-off
4.Dial: *#*#2846579#*#*
5. Go to projectmenu > background settings > log settings > log switch > set Log on
6.log setting-dump & log-on
7.Reboot Phone
Download B528_ROOT
8. Run B528_root.bat
9. Your phone should now be Rooted.
10. You can now go back *#*#2846579#*#* and turn logging off if you want.
Click to expand...
Click to collapse
It worked fine with me.
Thank you.

Bruno Soares said:
It worked fine with me.
Thank you.
Click to expand...
Click to collapse
Really? :O

mrasquinho said:
Really? :O
Click to expand...
Click to collapse
Yes, B528 made ​​with ROOT ... already with the app `s all reinstated by Titanium ...
It took a good few minutes to install the drivers that drew the net, but then was quick and without any problem.
EDIT: Do not know if I can help with anything: Professional 64Bit Win7

I was trying on a phone from a friend of mine. He was using winxp 32 bit, maybe that's the case...
Can youplease share with us the drivers you used?
Regards
Sent from my Huawei Ideos X5 using xda premium

mrasquinho said:
I was trying on a phone from a friend of mine. He was using winxp 32 bit, maybe that's the case...
Can youplease share with us the drivers you used?
Regards
Sent from my Huawei Ideos X5 using xda premium
Click to expand...
Click to collapse
I did not use any drivers ... I ran the program ROOT, x5 restarted when the updated drivers on the Internet alone and finished the operation ROOT.

Bruno Soares said:
I did not use any drivers ... I ran the program ROOT, x5 restarted when the updated drivers on the Internet alone and finished the operation ROOT.
Click to expand...
Click to collapse
Oh I see.. well tomorrow ill give it a try but on windows7.
Thanks!
Sent from my Huawei Ideos X5 using xda premium

[Q] Rooting with SuperOneClick 2.3.3

Hi everyone,
I've got a problem trying to root my Ideos X5 using SuperOneClick.. Everywhere I look, it looks so straightforward. I simply don't know why it doesn't work.
I have downloaded/installed the Android ADB driver, and run SOC as admin and all I get up to is Step 5.
No hangs. Just nothing. I don't know what I'm doing wrong.
Please help.. Thanks.

Which firmware you have?
Sent from my U8800 using Tapatalk 2

I have the official 2.3.5 firmware.

What version? Super one click doesn't work work B528
Sent from my U8800 using Tapatalk 2

uthmani said:
Hi everyone,
I've got a problem trying to root my Ideos X5 using SuperOneClick.. Everywhere I look, it looks so straightforward. I simply don't know why it doesn't work.
I have downloaded/installed the Android ADB driver, and run SOC as admin and all I get up to is Step 5.
No hangs. Just nothing. I don't know what I'm doing wrong.
Please help.. Thanks.
Click to expand...
Click to collapse
I've seen it myself, It simply stops working. Solution in my case: I forgot to enter the magic dialingnumbers:
---
On your Ideos V5, dial *#*#2846579#*#*
Go to projectmenu > background settings > log settings > log switch > set Log on
Reboot the Phone
Go to Settings > Applications > Development and enable USB Debuggingmode
Go to Settings > Applications and disable Fast Bootmode.
Run superoneclick.
---
hope this helps...

Android Version: 2.3.5
Baseband Version: 404020
Kernel Version: 2.6.35.7-perf
Build Number: U8800V100R001C00B522G001
Jailhouse said:
I've seen it myself, It simply stops working. Solution in my case: I forgot to enter the magic dialingnumbers:
---
On your Ideos V5, dial *#*#2846579#*#*
Go to projectmenu > background settings > log settings > log switch > set Log on
Reboot the Phone
Go to Settings > Applications > Development and enable USB Debuggingmode
Go to Settings > Applications and disable Fast Bootmode.
Run superoneclick.
---
hope this helps...
Click to expand...
Click to collapse
I tried that but still nothing..

Fixing 0 IMEI

Hello. I've been getting a lot of emails on how to do that and i thought i should make a thread here.
Now you got to have the original box in which there is the imei written. I don't take any credit for this guide as i didn't write it but i found it somewhere here but it doesn't exist anymore. I'm not responsible for any damage may happen to your phone. I did it several times after flashing official 2.3.5.
It has worked fine with my IDEOS X5 U8800.
1. Tools
a. Drivers for U800 32bit win 7 (tested and work )
http://www.2shared.com/file/fnP5fc8G/u8800Drivers.html
b. Drivers for Android 32 and 64 bit win 7 (not tested )
http://www.2shared.com/file/ZNZ4Q0lk...012_09_12.html
c. Software for restore
http://www.2shared.com/file/xBxUOnPz/DFS.html
2. Enable debugging by USB in the settings.
In call type * # * # 2846579 # * # * http://postimage.org/image/tnj4s2dyj/
3. Go to ProjectMenu -> Background settings -> Usb port settings put the Manufacture mode and corfim.
4. Go again to ProjectMenu -> Background settings -> Qualcomm backround open settings put the background open. Password 0 and corfim.
5. Go again to ProjectMenu -> Background settings -> Log setting -> Log switch put log on and corfim.
6. Now conect your phone to pc and install the drivers.
You must see this at your device manager http://postimage.org/image/5lrm61agd/
7. Instal DFS and run.
8. Click Ports, select the port with the signature DBAdapter Reserved Interface (double click) to close.
http://postimage.org/image/3l3bmfyzr/
9. In the DM select Qualcomm.
http://postimage.org/image/6bmt1908z/
10) Press the SPC, the bottom will Device Unlocked.
11) Select Programming and in the IMEI write yours and press Write.
http://postimage.org/image/dmbp29q35/
13) Check Imei, may appear after a reboot, if not try a few more times to try to set the port speed to 115200 (box to the left of DM)
Check IMEI *#06#
As soon as the IMEI restored change:
* # * # 2846579 # * # * -> ProjectMenu -> Background settings -> Usb port settings to put on the Manufacture mode google mode (or normal if you do not get up google)
* # * # 2846579 # * # * -> ProjectMenu - > Background settings -> Qualcomm backround open settings put close
Good luck..

Thanks a lot... now I got my imei back. But now I have one another problem, I installed ics rom and now my wifi Mac id is 00:00:00:00:00:00. Are they related?
Sent from my U8800 using XDA Premium 4 mobile app

I don't think so. But I've already replied somewhere on how to fix mac address. Search
Sent from my U8800 using xda app-developers app

Didn't work for me
Cybergiannis said:
Hello. I've been getting a lot of emails on how to do that and i thought i should make a thread here.
Now you got to have the original box in which there is the imei written. I don't take any credit for this guide as i didn't write it but i found it somewhere here but it doesn't exist anymore. I'm not responsible for any damage may happen to your phone. I did it several times after flashing official 2.3.5.
It has worked fine with my IDEOS X5 U8800.
1. Tools
a. Drivers for U800 32bit win 7 (tested and work )
http://www.2shared.com/file/fnP5fc8G/u8800Drivers.html
b. Drivers for Android 32 and 64 bit win 7 (not tested )
http://www.2shared.com/file/ZNZ4Q0lk...012_09_12.html
c. Software for restore
http://www.2shared.com/file/xBxUOnPz/DFS.html
2. Enable debugging by USB in the settings.
In call type * # * # 2846579 # * # * http://postimage.org/image/tnj4s2dyj/
3. Go to ProjectMenu -> Background settings -> Usb port settings put the Manufacture mode and corfim.
4. Go again to ProjectMenu -> Background settings -> Qualcomm backround open settings put the background open. Password 0 and corfim.
5. Go again to ProjectMenu -> Background settings -> Log setting -> Log switch put log on and corfim.
6. Now conect your phone to pc and install the drivers.
You must see this at your device manager http://postimage.org/image/5lrm61agd/
7. Instal DFS and run.
8. Click Ports, select the port with the signature DBAdapter Reserved Interface (double click) to close.
http://postimage.org/image/3l3bmfyzr/
9. In the DM select Qualcomm.
http://postimage.org/image/6bmt1908z/
10) Press the SPC, the bottom will Device Unlocked.
11) Select Programming and in the IMEI write yours and press Write.
http://postimage.org/image/dmbp29q35/
13) Check Imei, may appear after a reboot, if not try a few more times to try to set the port speed to 115200 (box to the left of DM)
Check IMEI *#06#
As soon as the IMEI restored change:
* # * # 2846579 # * # * -> ProjectMenu -> Background settings -> Usb port settings to put on the Manufacture mode google mode (or normal if you do not get up google)
* # * # 2846579 # * # * -> ProjectMenu - > Background settings -> Qualcomm backround open settings put close
Good luck..
Click to expand...
Click to collapse
This procedure did not work for me. I found it a couple of weeks ago in another thread (http://forum.xda-developers.com/showthread.php?t=1591997) and gave it a try (numerous times) without success. I was able to complete all steps up until actually writing the new IMEI. I attempted to write it a couple of dozen times without any success. It appears to work but the lMEI never actually changes.
I also found another procedure using a program called NVedit but it would give me an error stating the NV location was set to read only (I forget the actually wording). It seems that my phone has the location that contains my IMEI locked in some way that nothing can change it. So I gave up on that phone and am using a different one that I bought on eBay, brand new at a dirt cheap price ($27.00).

pastorbob62 said:
This procedure did not work for me. I found it a couple of weeks ago in another thread (http://forum.xda-developers.com/showthread.php?t=1591997) and gave it a try (numerous times) without success. I was able to complete all steps up until actually writing the new IMEI. I attempted to write it a couple of dozen times without any success. It appears to work but the lMEI never actually changes.
I also found another procedure using a program called NVedit but it would give me an error stating the NV location was set to read only (I forget the actually wording). It seems that my phone has the location that contains my IMEI locked in some way that nothing can change it. So I gave up on that phone and am using a different one that I bought on eBay, brand new at a dirt cheap price ($27.00).
Click to expand...
Click to collapse
are you rooted? i remember having these issues when i flashed 2.3 after 4.2 rom. u first need ti flash 2.2 then 2.3 and that should work

Cybergiannis said:
are you rooted? i remember having these issues when i flashed 2.3 after 4.2 rom. u first need ti flash 2.2 then 2.3 and that should work
Click to expand...
Click to collapse
Yes, I am rooted.
I started out on 2.2 way back in the beginning. Then I flashed 2.3.5. That's when I lost my IMEI and replaced the phone.
But I wanted to keep experimenting at getting it working 100% even though I had a new working, rooted, and customized phone. Using 5IromToolBox I restored a backup from the new phone to the broken phone just to see if it would work. Then I flashed Stallion-51-ICS custom ROM. It is a GB based ROM with look and feel of ICS.
When I run the procedure in this thread, everything looks as though it has worked, but the IMEI never changes. So what did 5Irom do differently that it was able to restore the backup from a different phone but I cannot use DFS or NVEditor to write to the locations? The back I made from the new phone and restored to the old one is Consumer Cellular so I suspect they have locked something out that 5Irom is able to get around but other tools don't.
On another note, just for the heck of it I tried to upgrade to ICS from GB and it fails on the first update step. Go figure.
If I could find a full-flash procedure for the pro and 51 versions of this phone I suspect I could resolve all issues. Who knows?
UPDATE: I went through the whole process again and noted a point I forgot to mention. In DFS at the bottom of the screen EQF is yellow, not green. I don't recall exactly what that means but in reading through the DFS doc, it states that writing a new IMEI is not possible as long as EQF is yellow. When I enter my IMEI and click on the WRITE command the response is "MODECHANGE OfflineD OK"

pastorbob62 said:
Yes, I am rooted.
I started out on 2.2 way back in the beginning. Then I flashed 2.3.5. That's when I lost my IMEI and replaced the phone.
But I wanted to keep experimenting at getting it working 100% even though I had a new working, rooted, and customized phone. Using 5IromToolBox I restored a backup from the new phone to the broken phone just to see if it would work. Then I flashed Stallion-51-ICS custom ROM. It is a GB based ROM with look and feel of ICS.
When I run the procedure in this thread, everything looks as though it has worked, but the IMEI never changes. So what did 5Irom do differently that it was able to restore the backup from a different phone but I cannot use DFS or NVEditor to write to the locations? The back I made from the new phone and restored to the old one is Consumer Cellular so I suspect they have locked something out that 5Irom is able to get around but other tools don't.
On another note, just for the heck of it I tried to upgrade to ICS from GB and it fails on the first update step. Go figure.
If I could find a full-flash procedure for the pro and 51 versions of this phone I suspect I could resolve all issues. Who knows?
UPDATE: I went through the whole process again and noted a point I forgot to mention. In DFS at the bottom of the screen EQF is yellow, not green. I don't recall exactly what that means but in reading through the DFS doc, it states that writing a new IMEI is not possible as long as EQF is yellow. When I enter my IMEI and click on the WRITE command the response is "MODECHANGE OfflineD OK"
Click to expand...
Click to collapse
it should be green! what i would do is to flash 2.2 then 2.3.5 and follow again the steps very carefully! maybe u ever flashed a partition and it's not the default one? i can't really help you :/ try this and if it doesn't work make a thread in the q&a section

Cybergiannis said:
it should be green! what i would do is to flash 2.2 then 2.3.5 and follow again the steps very carefully! maybe u ever flashed a partition and it's not the default one? i can't really help you :/ try this and if it doesn't work make a thread in the q&a section
Click to expand...
Click to collapse
Yeah, I knew that it should be green. The bottom line is I do not have the 2.2 image to flash. I would have done that a long time ago if I had it. All I have is the DiskImage backup that I made off of my new phone. When I flashed it onto the old phone it starts, displays the Consumer Cellular logo for about ten seconds then shuts off immediately. As far as starting a thread in Q & A, I did that weeks ago and got nowhere fast.
Any link I have found for the original 2.2 for -51 and pro is usually a broken link. or it takes me to download that stupid iLivid program that doesn't do squat to get the files I need. I did find a DiskImage file that somebody made and posted but it is almost 4 gig in size. You are supposed to use Pink Screen to load it but Pink Screen only gives me access to the image directory and it's only 256 meg.
Thank you for your time and suggestions.

I believe in the wiki section there are links to default 2.2 and 2.3.5. The ones I found a long time ago were from Blefish, although I'm not sure. Good luck!
Sent from my U8800 using xda app-developers app

Dead link.
Hi.
I try to download the "Drivers for Android 32 and 64 bit win 7 (not tested )", but its a dead link. I run win7 pro, and somehow the 32 bit driver doesn't work.
Would like to try the 64 bit driver. Could u reupload it, please?

I just did a repost cause i veen asked a lot of times I don't have the files and I don't thinks drivers are needed. You could just install huawei's suite for PC
Sent from my U8800 using xda app-developers app

WORKS!!!!
Cybergiannis said:
I just did a repost cause i veen asked a lot of times I don't have the files and I don't thinks drivers are needed. You could just install huawei's suite for PC
Sent from my U8800 using xda app-developers app
Click to expand...
Click to collapse
YEY!!!!!!! It worked!!!!
Update the first post with this info so others dont have to struggle like I did.
Thanks a bunch!!! :victory:

ευχαριστω πολυ----thanks man

Hi All,
Many thanks for this post.
Iv recently installed the Blefish CM11 rom for U8800 and its works fine. Only issue I have is IMEI=0. I can make and receive calls and even use the mobile internet.
My question is - Is there a way to edit the IMEI no on KK4.4.2 ROM through entering in the engineering mode?
or else, will have to start from the beginning (stock rom process as mentioned in the OP).
thanks for your help.

mohammad.nomaan said:
Hi All,
Many thanks for this post.
Iv recently installed the Blefish CM11 rom for U8800 and its works fine. Only issue I have is IMEI=0. I can make and receive calls and even use the mobile internet.
My question is - Is there a way to edit the IMEI no on KK4.4.2 ROM through entering in the engineering mode?
or else, will have to start from the beginning (stock rom process as mentioned in the OP).
thanks for your help.
Click to expand...
Click to collapse
i have no idea. my guess is that u should try

Cybergiannis said:
i have no idea. my guess is that u should try
Click to expand...
Click to collapse
Hi,
I haven't found out the way to fix it yet.
Only way I got to fix is to redo the stock rom, root, save the imei and the reflash the custom rom.
The reason for the imei issue was changing the partitions
thnx anyways

this guide that you have post it has been made by me and at least you should have say that is ported from me. Even the links that you have are in my acount. YOU ONLY COPY MY POST . you could ask me to repost it or just mention me. Check this link http://forum.xda-developers.com/showthread.php?t=1876501

[GUIDE] Solve first issues

From ZUK Fans eu forum :
Notification :
1) Autostart the apps : SafeCenter > Autostart > Click on "Disabled autostart App(s)" > Click on the icon in the top right corner>Click on the "+" > Add your apps
2) Enable the notifications : Setting > Notifcations & Statusbar > Notification > Enable the 3 options
3) For some apps, you can enable floating window if it's disabled on : Settings > Security & Privacy > Permissions > Apps
5) Lock the apps in RAM : Open the Apps history (press Home button twice by default) and swipe down the apps
4) Reboot
Sync Google Contact :
Install this : http://www.apkmirror.com/apk/google...gle-contacts-sync-6-0-1-android-apk-download/

Pipould said:
From ZUK Fans eu forum :
Notification :
1) Autostart the apps : SafeCenter > Autostart > Click on "Disabled autostart App(s)" > Click on the icon in the top right corner>Click on the "+" > Add your apps
2) Enable the notifications : Setting > Notifcations & Statusbar > Notification > Enable the 3 options
3) For some apps, you can enable floating window if it's disabled on : Settings > Security & Privacy > Permissions > Apps
5) Lock the apps in RAM : Open the Apps history (press Home button twice by default) and swipe down the apps
4) Reboot
Sync Google Contact :
Install this : http://www.apkmirror.com/apk/google...gle-contacts-sync-6-0-1-android-apk-download/
Click to expand...
Click to collapse
Thanks for sharing.
It's such a strange thing what you have to do on Chinese roms to get the basic of today's mobile environment: working push notifications for services you install!
Sent from my Zuk Z1 using XDA Labs

vittogn said:
Thanks for sharing.
It's such a strange thing what you have to do on Chinese roms to get the basic of today's mobile environment: working push notifications for services you install!
Sent from my Zuk Z1 using XDA Labs
Click to expand...
Click to collapse
that's litterally wtf ! Ok you save battery but cmon ! Now you need to let the full app run all the time... They have safe center and so on and not a damm screen to check that...

Zuk Z2 bug
Hello,
i hope for a fast reply,
i recieved my zuk z2(not pro) yesterday, and things arent working properly,
first of all the play store has tons of bugs,
also in the settings menu some menus crash totaly, like the notifications, fonts etc.
I tried to do a factory reset in order to fix it,
after doing so the keyboard stopped working and i cant do anything now,
what can i do?

omrihak said:
Hello,
i hope for a fast reply,
i recieved my zuk z2(not pro) yesterday, and things arent working properly,
first of all the play store has tons of bugs,
also in the settings menu some menus crash totaly, like the notifications, fonts etc.
I tried to do a factory reset in order to fix it,
after doing so the keyboard stopped working and i cant do anything now,
what can i do?
Click to expand...
Click to collapse
I guess you bought this phone on Oppomart ?
I recommend to reflash your rom (http://zukfans.eu/).. Otherwise you can't get the lastest version which is 1.9.077

Prockkaii said:
I guess you bought this phone on Oppomart ?
I recommend to reflash your rom (http://zukfans.eu/).. Otherwise you can't get the lastest version which is 1.9.077
Click to expand...
Click to collapse
Is that a common problem with Oppomart?
I ordered mine a few weeks back.

luytent said:
Is that a common problem with Oppomart?
I ordered mine a few weeks back.
Click to expand...
Click to collapse
I think it is. But flashing back the rom is very easy.

Pipould said:
that's litterally wtf ! Ok you save battery but cmon ! Now you need to let the full app run all the time... They have safe center and so on and not a damm screen to check that...
Click to expand...
Click to collapse
We don't even get a damn battery graph. For those of us who micro-manage our phones, ZUI is a disaster.

Karly Johnston said:
We don't even get a damn battery graph. For those of us who micro-manage our phones, ZUI is a disaster.
Click to expand...
Click to collapse
To be fair, there is such a graph, but you have to activate the Developer Settings.
Then: Settings -> Advanced Settings -> Developer Options -> History details.

How do I get Play Music controls to show up on the lock screen?

Double Post

Prockkaii said:
I think it is. But flashing back the rom is very easy.
Click to expand...
Click to collapse
So does this mean if I flash zukfans eu ROM "ZUK Z2 Stable ROM 1.9.044", I will have not crashing menus nor the "play store cannot download any apps" issue?
This would be great, at least.. until a real ROM is out..

miheilo said:
So does this mean if I flash zukfans eu ROM "ZUK Z2 Stable ROM 1.9.044", I will have not crashing menus nor the "play store cannot download any apps" issue?
This would be great, at least.. until a real ROM is out..
Click to expand...
Click to collapse
You can fix that by setting Play Store to Auto Start and enable all permissions.

Autostart
Hi I can not find ... "SAFECENTER" in zuk z2 (not pro)...I have problem with (viber and messenger) I would like autostart..
1) Autostart the apps : "SafeCenter" ??? > Autostart > Click on "Disabled autostart App(s)" > Click on the icon in the top right corner>Click on the "+" > Add your apps

Android System - Excessive Battery consumption on MIUI 11.0.4

Hello all,
Maybe somebody can help me here.
I've recently updated my device into the MIUI 11.0.4.0 (QFJEUXM) rom . Official OTA update by Xiaomi,
I've noticed an increase in battery consumption ( mainly caused by android system app around 25%).
Somebody with similar issue ? is there a way to rollback safely into a previous version ? My previous version 11.0.3.0 was working just fine... I'm actually regretting having updated my phone.
Kudos!

Yes, many users have the same problem, including me.

Well, I feel my Mi9T has strange battery consumption through all the roms.
I'm now on custom rom with 11.0.4 vendor. Some times it uses more than 1%/h while deep dozing.
Screen on time is estimated to be around 8h, is this too short?

I'm getting sick of the android system drain. Does anyone know if xiaomi.eu rom any better? Is it worth flashing?

yellowbear4 said:
I'm getting sick of the android system drain. Does anyone know if xiaomi.eu rom any better? Is it worth flashing?
Click to expand...
Click to collapse
Yes or try this https://sourceforge.net/projects/mi...edmiK20_MIUI_20.2.27_MiRoom_10.0.zip/download

Benfatica said:
Yes or try this https://sourceforge.net/projects/mi...edmiK20_MIUI_20.2.27_MiRoom_10.0.zip/download
Click to expand...
Click to collapse
Yeah.. flashed 20.2.27 and got 2.6% drain per each hour tonight, in deep sleep... - 21% per night.
Cell standby 530 mAh.

1. Unlock Developer Mode
Settings > About phone > tap (many times) on MIUI version until you've a message "You are developers!"
2. Turn off MIUI optimization
Settings > Additional settings > Developer options > Turn on Developer options (if it's not) > scroll down to the last page and Turn off MIUI optimization
it's work for me!

nzing82 said:
1. Unlock Developer Mode
Settings > About phone > tab (many times) on MIUI version until you've a message "You are developers!"
2. Turn off MIUI optimization
Settings > Additional settings > Developer options > Turn on Developer options (if it's not) > scroll down to the last page and Turn off MIUI optimization
it's work for me!
Click to expand...
Click to collapse
Doesn't work for me have it turned off since I got the phone and the battery drain issues are only since android 10 update.

Benfatica said:
Yes or try this https://sourceforge.net/projects/mi...edmiK20_MIUI_20.2.27_MiRoom_10.0.zip/download
Click to expand...
Click to collapse
nzing82 said:
1. Unlock Developer Mode
Settings > About phone > tap (many times) on MIUI version until you've a message "You are developers!"
2. Turn off MIUI optimization
Settings > Additional settings > Developer options > Turn on Developer options (if it's not) > scroll down to the last page and Turn off MIUI optimization
it's work for me!
Click to expand...
Click to collapse
I have just checked this 3 times... I don't have this option under developer settings at all