I have installed windows 8 one week ago. On wednesday 14th of March , TELECOM IT comes to my house for install her line and internet.I have bought a Dlink modem , when the operator comes to my house , can he install the modem with telecome line because i am afraid about the driver problems When i get the cd of installation of dlink , the installation part perfectly ..Tell me something you know! THANKS
As long as drivers are available for Windows 7 you'll be fine.
Related
hi all,
have been flashing for about 6 months now but have only recently ran into a problem.
im using vista (like always) and now when the artemis goes into that boot mode where it flashes; on the the pc it now says installing new device and it looks like it blocks the flash.
it never used to do this before i started active syncing using bluetooth. i have set my computer backup removing bluetooth & running activesync thru the wire; but with no success
any ideas; whats changed & how to fix it? i like flashing
thanks to all
JT
Which Windows Mobile Device Center do you use? 6.1?
You can download it from the microsoft site.
Are you running USPL of so you must download the USB interface (old style) drivers found on this sit.
Let me know what it is.
j3roen said:
Which Windows Mobile Device Center do you use? 6.1?
You can download it from the microsoft site.
Are you running USPL of so you must download the USB interface (old style) drivers found on this sit.
Let me know what it is.
Click to expand...
Click to collapse
im using vanilla 2.0 which is 6.0 based at present; was looking at other roms & changing the splash screen etc etc.
i downloaded the old style usb drivers when i first got vista & it worked fine; no problems; in fact all my flashing is done under vista. im starting to think that vista may have auto updated these to the new version as i have vista set to auto update downloads from windows updates.
any ideas?
Hi,
Can anyone please tell me why my Omnia II (i8000) is not detected by ActiveSync or Windows Mobile Device Center? I'm tired of trying and very close to giving up hope.
Can you please help me with the issue?
First try on another computer. Then you know more and you can search this site.
I tried with 5 computers. Do I need more?
well i have the opposite case ... everytime a connect mine it detects a new phone .....
In win xp just a one time installation of activesync 4.5 then reboots afterwards then install pc studio that came with a cd or download the latest one.
i had this kind of problem with WMDC running in win 7 ultimate.
what i did was
1. install the pc studio sw (use compatibility mode as win vista sp1) then reboot
2. when u plug the O2 it will try to find the driver but will fail to install.
3. uninstall WMDC thru add/remove programs
4. when u go to dev mgr u will see I8000 with "Question Mark" meaning driver doesnt install properly( pretty much obvious..)
4. try to update the driver manually it says to search driver thru internet select that option if u miss it.. ur next option is to run windows update
5. win update will try to find the latest patch and driver update for ur system. (ur phone shuld be connected to pc at this moment) so that it will find the hardware update available for your pc.
6. go to "hardware option" on the windows update, if u see the "MIT USB Sync" thats the driver for your omnia 2, select that and install it right away..once finish reboot while phone are still connected.
7. if it doesnt find the hardware update on first run..reboot and try it again..( it took me several hrs before it finds the mit usb sync.. patience it s must here)
8. WMDC will run on startup automatically.
hope this will help..
and the bad part is Samsung did not make any driver/software for Windows 7
My i8000 works without a hitch on my Win7 system (x64 and x86). Check if your device's USB option is set to ActiveSyn or USB Mass Storage.
ishtangli said:
My i8000 works without a hitch on my Win7 system (x64 and x86). Check if your device's USB option is set to ActiveSyn or USB Mass Storage.
Click to expand...
Click to collapse
the same here, works without any issues on x86/x64.
help with omnai 2 i8000
hi friends..
i bought an omnia 2 i8000 8gb 2 weeks back..i bought it from india..
i want to know weather i can upgrade my winmo 6.1 professional to winmo 6.5..
the shop told free upgrade is possible..but not available in india till now..
so i want to know is there a way to upgrade it from internet..
pda--I8000DDII3
CSC--I8000NUII3
these are the details in version..can anyone get me a solution..
i read from internet that i could go to samsung site of a country and upgrade it from that site if my phone was manufactured in that country..im not sure if thats right..
pls tell me from which place my phone was made..
and also is it possible for me to upgrade to winmo 6.5 from samsung site...
PHONE--I8000XXII4
Just to share ... Spent abt 6hrs figuring out why my omnia 2 would always hang when i needed to set it up for partnership in order to sync in WMDC (OS = Win7). Been searching wif different keywords in google and realised my problem is not common which convinces me that there is something funky with my set up that is preventing the sync.
Got lucky today ... did a wild google on "omnia 2 wmdc driver" ... and on 1 of the threads, discovered that it is important that the Windows in-built Windows Media Player had to be "installed", which i didnt do since i'd been using other media players. And voila ... issue resolved.
MS sucks! Especially when you get humiliated by such problems that seems so easily fixed. =D
enjoycool said:
I tried with 5 computers. Do I need more?
Click to expand...
Click to collapse
Try a 6th PC for good luck
Hello guys ;
I'm having a problem getting my X2 recognized on my pc ( running windows 7 ) ....
First ,i want to say that i have it before working on my previous windows 7 version without nay problem , when I installed this fresh version of win 7 , it didn't recognize it correctly and it search for windows update and locate a strange driver ( Microsoft sync usb ) which changes nothing at all..
i tried downloading windows mobile Device center separately and installed latest version with driver update , but it also doesn't recognize it it appears to be installing a new driver but it end with saying " Driver installation failed - unidentified device "
the mobile device center works fie but doesn't see my X2 !!!!
I don't know where is the problem,can you help ?
did you load MS Sync wiht the phone connected via USB? When I re-installed it on my Win 7 PC, it only loaded the drivers correctly after I had the phone plugged in and connected.
When getting active sync from Microsoft, I assume that you choose the Win7 version and not the XP version ... (just checking).
Not sure what else I can offer other then it is working fine with the connection via the USB and via BT (the BT connection is with my work PC -- also Win 7 professional, the home PC is Win 7 Premium).
Good luck.
I did , no sue
it either sas " unidentified device - or device unplugged " .. or it installs driver for Microosft USB Sync "
any ideas ?
try to disable McAfee Firewall(or any other firewall) and reconnect ur phone
i disabled antivirus and no firewall is running
Hi all,
I just installed a fresh copy of win7 ultimate on my HTC shift and installed all drivers because the old install was getting sluggish. Everything works except for two things: interpolated high resolution gives a blue screen crash when aero is active (no transparency) and the windows basic theme is UGLY. And the second problem: after I install like 85 windows updates shag control center crashes and have to restore a system recovery point. Do you know what update causes this so i can hide it and install the rest?
Many thanks,
Pelle
pelle.jansen said:
Hi all,
I just installed a fresh copy of win7 ultimate on my HTC shift and installed all drivers because the old install was getting sluggish. Everything works except for two things: interpolated high resolution gives a blue screen crash when aero is active (no transparency) and the windows basic theme is UGLY. And the second problem: after I install like 85 windows updates shag control center crashes and have to restore a system recovery point. Do you know what update causes this so i can hide it and install the rest?
Many thanks,
Pelle
Click to expand...
Click to collapse
Which drivers did you use? I hope you are not using the Windows Vista drivers. Download the Shift Windows 7 drivers from this link http://azsharing.com/yvex8pwmz01j/SHIFT.zip.html. Install the Windows 7 drivers discussed in this thread http://forum.xda-developers.com/showthread.php?t=590009. The sequence of installing them is precise including those that you need to install in Vista Compatibility mode and with Admin Privilleges. As the OP stated some of the drivers will be installed through Windows update but check which ones. Follow the recomendations in that thread and all will work like a charm...
I believe your Shag Control problems and all display problems are related to the drivers and not Windows update. Mine is on automatic updates and I have not excluded any updates at all save for the Language Pack that I do not need....
Re-install the drivers and lets see what happens after that. By the way DO NOT ENABLE AERO BEFORE INSTALLING THE GRAPHICS DRIVERS otherwise you get BSOD....... That advice is shown as Important in the thread mentioned above. Enable aero theme as the last thing you do with all drivers installed to avoid any problems.
I hope you get sorted and enjoy your Shift with Windows 7......
Edit>>>> There is a way to disable Aero when facing your current BSOd situation through Screen Resolution Settings but I dont remember the precise steps. I can retrace the steps on my Shift once I get to it after work and see whether that will help you. But let me know whether re-installing the drivers will have sorted you out>>>>>
Hello,
I used the driver sequence at gadgetmix (sorry, i can't post links yet) because it worked fine a year ago and the drivers from the HTC website in vista compatibility mode and run as administrator.
With reinstalling do you mean that I have to uninstall the old driver and install the new one or can i just install the new driver over the older one?
Thanks
Pelle
EDIT: had aero off the entire installation
pelle.jansen said:
Hello,
I used the driver sequence at gadgetmix (sorry, i can't post links yet) because it worked fine a year ago and the drivers from the HTC website in vista compatibility mode and run as administrator.
With reinstalling do you mean that I have to uninstall the old driver and install the new one or can i just install the new driver over the older one?
Thanks
Pelle
EDIT: had aero off the entire installation
Click to expand...
Click to collapse
Best is to uninstall and then install afresh using Windows 7 drivers..... Perhaps even check box to delete the old driver as well. If Aero was off during installation you dont have many problems. Aero on during 7 upgrade especially before graphics driver update causes Bsod or boot loop.
You should be ok when you install the windows 7 drivers. But the sequence of driver installations is important.... All the best
Have been fiddeling with the drivers for a while now and given up. just started Windows 7 setup again. After that i will use the windows 7! drivers and hope for the best.
Pelle
EDIT: windows just installed. Turning off Aero and starting drivers... Fingers crossed
Drivers just finised and now the sond doesn't work
Tried rolling back/ updating driver, reinstalling driver muting unmuting in windows and shift control center but no luck...
And when I press the resolution changer I have to reboot to switch resolution.
shift control center has to be selected from start menu to start
This is a lot worse than when i did it using the tutorial at gadgetmix
Any idea how to fix this?
pelle.jansen said:
Drivers just finised and now the sond doesn't work
Tried rolling back/ updating driver, reinstalling driver muting unmuting in windows and shift control center but no luck...
And when I press the resolution changer I have to reboot to switch resolution.
shift control center has to be selected from start menu to start
This is a lot worse than when i did it using the tutorial at gadgetmix
Any idea how to fix this?
Click to expand...
Click to collapse
Sorry to hear about the problems you are facing. I am surprised coz I did the Windows 7 installation just a few weeks ago after reviving my dead Shift and everything is working perfectly for me. The only thing I havent fully sorted out is Finger print thing but I know I only need an hour or 2 with it and all will be well.
Incidentally did you do a clean install of 7 or you upgraded Vista?
Since you have just done a fresh install and you dont stand to lose much I would advise that you re-install Vista (F3) which will install all the drivers then Upgrade Windows 7 from the freshly re-installed Vista. You can then install drivers for any device that will show not to be installed after 7 upgrade.... Of course following the sequence and allowing Windows Update to take care of the rest.
PlayStation said:
Sorry to hear about the problems you are facing. I am surprised coz I did the Windows 7 installation just a few weeks ago after reviving my dead Shift and everything is working perfectly for me. The only thing I havent fully sorted out is Finger print thing but I know I only need an hour or 2 with it and all will be well.
Incidentally did you do a clean install of 7 or you upgraded Vista?
Since you have just done a fresh install and you dont stand to lose much I would advise that you re-install Vista (F3) which will install all the drivers then Upgrade Windows 7 from the freshly re-installed Vista. You can then install drivers for any device that will show not to be installed after 7 upgrade.... Of course following the sequence and allowing Windows Update to take care of the rest.
Click to expand...
Click to collapse
The problem is that i once had to replace my HDD because some idiot dropped my shift and for some reason the accelerometer didn't kick in and trashed my hard drive. So pressing F3 won't do anything. Are there any other solutions?
DID IT! It was in my windows 7 install disk. Downloaded and burnt one (it should be legal because I have paid for it) installed, installed drivers an BOOM! everything works! aero, HiRes in aero sound, its nice and responsive battery life on power saver 2H and 45 minutes, havn't tested modem yet as my sim card is in my smartphone but will do that. Thanks a lot for all of your help! I will be hanin round here to help others. I AM SO HAPPY EVERYTHING IS FINE WITH MY LOVELY SHIFT! Updates Sucseeded and everything works perfect!
Only one more question: is it safe to install sp1? Or will that give problems with some of the drivers.
pelle.jansen said:
DID IT! It was in my windows 7 install disk. Downloaded and burnt one (it should be legal because I have paid for it) installed, installed drivers an BOOM! everything works! aero, HiRes in aero sound, its nice and responsive battery life on power saver 2H and 45 minutes, havn't tested modem yet as my sim card is in my smartphone but will do that. Thanks a lot for all of your help! I will be hanin round here to help others. I AM SO HAPPY EVERYTHING IS FINE WITH MY LOVELY SHIFT! Updates Sucseeded and everything works perfect!
Only one more question: is it safe to install sp1? Or will that give problems with some of the drivers.
Click to expand...
Click to collapse
Glad you finally managed to get your Shift up to speed. I always felt that your peculiar issue boiled down to bad install which is confirmed by the first software you used. What type of disk did you use for the Hdd replacement - Hdd or SSd and for what capacity. Been thinking of upgrading but Ssd costs are still up there in teh skies and might not justify upgrading for the ageing Shift....
You can update to Service Pack 1 no problem. I have it and no issues at all.
PlayStation said:
Glad you finally managed to get your Shift up to speed. I always felt that your peculiar issue boiled down to bad install which is confirmed by the first software you used. What type of disk did you use for the Hdd replacement - Hdd or SSd and for what capacity. Been thinking of upgrading but Ssd costs are still up there in teh skies and might not justify upgrading for the ageing Shift....
You can update to Service Pack 1 no problem. I have it and no issues at all.
Click to expand...
Click to collapse
I Bought the exact same drive on ebay for $30 or so. I solved the hard drive light staying on by just running CHKDSK but now the same programs just crash...
It now happens when trying to do a system score, when changing my network to public and when uninstalling a program using control panel. The rest all works fine.
Ok so I have an HP pavilion DV7-4825DX which.. after 4 years still is better than most of the Notebooks over there. My laptip comes with two gpus: one is from AMD for advanced graphics and the other one is an Intel gpu with less power but better battery friendly. My PC came with Windows 7 Ultimate out of the box and, obviously everything worked fine. Years later I decided to upgrade to Windows 8 Pro. I did a clean install and everything worked flawlessly. Same happend to W8.1 and W8.1 update 1 (both with clean installs and manually installed drivers). Then Windows 10 was announced.. I had went to the Windows Insider page and converted me to one of then, then i grab the first build.
This is the first time that I upgrade (not clean installed) Windows. The installation went fine but the screen never turned on after the bootscreen (sounds worked, fingerprint scanner worked etc). Rebooted in safe mode and deleted the graphics drivers from both gpus and then it started. I've installed the AMD graphics and they worked, then I installed the Intel ones and woops! Blackscreen again. Deleted everything and installed the Intel drivers first and worked, then I decided to go with the Amd ones and.... black...screen. So i thought which is more productive to keep? And I keep the AMD ones. But some apps or 3D moddeling programs require the intel processor to work and viceversa, so I turned back to 8.1 Update 1. Now that Microsoft released the "Consumer Preview" kind of version of W10 I've installed it...
.
.
.
Black screen.
Then a screen appeared saying that my PC went back to the last OS because the W10 couldn't be installed. So I had deleted the drivers and reinstalled and now is working only with AMD.
End of the story, the conclussion is that Windows 10 doesn't support switchable graphics anymore and I wrote in the feedback section but I think I'm the only one with this problem so please, people, report it too to get it fixed in the next builds.
Thanks!
I believe it has to do with the WDDM signing, and Windows 10 uses a newer one that AMD has not had any drivers released for.
That or because the new build comes with NT 11 kernel.
vbetts said:
That or because the new build comes with NT 11 kernel.
Click to expand...
Click to collapse
Actually it comes with nt10 (10 cos of win 10 who'd a known) and I had 10 when it was first released I had a laptop with Intel hd4000 and gtx 750m and both worked out of the box per say I had to do a little tweaking to get progs to play along sounds like a driver issue you looked for amd beta drivers?
galaxynote2 said:
Ok so I have an HP pavilion DV7-4825DX which.. after 4 years still is better than most of the Notebooks over there. My laptip comes with two gpus: one is from AMD for advanced graphics and the other one is an Intel gpu with less power but better battery friendly. My PC came with Windows 7 Ultimate out of the box and, obviously everything worked fine. Years later I decided to upgrade to Windows 8 Pro. I did a clean install and everything worked flawlessly. Same happend to W8.1 and W8.1 update 1 (both with clean installs and manually installed drivers). Then Windows 10 was announced.. I had went to the Windows Insider page and converted me to one of then, then i grab the first build.
This is the first time that I upgrade (not clean installed) Windows. The installation went fine but the screen never turned on after the bootscreen (sounds worked, fingerprint scanner worked etc). Rebooted in safe mode and deleted the graphics drivers from both gpus and then it started. I've installed the AMD graphics and they worked, then I installed the Intel ones and woops! Blackscreen again. Deleted everything and installed the Intel drivers first and worked, then I decided to go with the Amd ones and.... black...screen. So i thought which is more productive to keep? And I keep the AMD ones. But some apps or 3D moddeling programs require the intel processor to work and viceversa, so I turned back to 8.1 Update 1. Now that Microsoft released the "Consumer Preview" kind of version of W10 I've installed it...
.
.
.
Black screen.
Then a screen appeared saying that my PC went back to the last OS because the W10 couldn't be installed. So I had deleted the drivers and reinstalled and now is working only with AMD.
End of the story, the conclussion is that Windows 10 doesn't support switchable graphics anymore and I wrote in the feedback section but I think I'm the only one with this problem so please, people, report it too to get it fixed in the next builds.
Thanks!
Click to expand...
Click to collapse
it actually does Support it, i have the same problem on a dell vostro ( core i5 with build in gpu and a nvidia)
before install remove all gpu drivers (even the intel drivers) reboot and after it installed the generic drivers for intel turn of internet connection ( DONT let it install any other grapic drivers)
now without internet upgrade to win 10 , after all is done you can connect to internet and manually install your second grapic drivers.
this worked for me , and yes its a pain in the butt.
ceesheim said:
it actually does Support it, i have the same problem on a dell vostro ( core i5 with build in gpu and a nvidia)
before install remove all gpu drivers (even the intel drivers) reboot and after it installed the generic drivers for intel turn of internet connection ( DONT let it install any other grapic drivers)
now without internet upgrade to win 10 , after all is done you can connect to internet and manually install your second grapic drivers.
this worked for me , and yes its a pain in the butt.
Click to expand...
Click to collapse
mmh.. Tried everything without luck, I didn't thought that it might be the solution. I will give it a try! Thanks!