Database Users

SetCPU on Incredible?

Ok, i have a fully rooted incredible with SetCPU installed. I have profiles enabled and setup but when i change the main profile the current clockspeed is always higher. Also, the min/max at the top right never change from 998mhz max and 250 min. Do i need a special kernel or something to use setcpu? i have it under the nexus one/snapdragon profile btw. and its 1.5.4

mikerulez121 said:
Ok, i have a fully rooted incredible with SetCPU installed. I have profiles enabled and setup but when i change the main profile the current clockspeed is always higher. Also, the min/max at the top right never change from 998mhz max and 250 min. Do i need a special kernel or something to use setcpu? i have it under the nexus one/snapdragon profile btw. and its 1.5.4
Click to expand...
Click to collapse
Looks like only simple switches like "performance, userspace, etc" and for some reason advanced settings will make a difference. I believe persistent/kernel-level switches not provided for in the UI cannot work at present because we can't write to the build.prop, user.conf, or init.rc.
P.S., the DI's processor is upgraded from N1's. Same product line, newer model.

So im out of luck until a new kernel is out? Ok. But if i get a new kernel, will i be able to keep the default os or does that require a new rom?

Give 1.6 a try. Maybe it works for you.

larsdennert said:
Give 1.6 a try. Maybe it works for you.
Click to expand...
Click to collapse
Nope, even in 1.6 direct throttling still does/can not work, but seems like selecting userdata, performance, or ondemand has an effect on where the processor speed averages

You will need a overclocked kernal for SetCPU to work.

You DO NOT need an overclock kernel for it to work. The problem is the /system partition is not writable from within Android which is how SetCPU works. Once we get the nand unlock, it'll work.

from my understanding is you will need an unlocked kernel and RW NAND

Berzerker7 said:
You DO NOT need an overclock kernel for it to work. The problem is the /system partition is not writable from within Android which is how SetCPU works. Once we get the nand unlock, it'll work.
Click to expand...
Click to collapse
Now THAT makes sense. I'm not sure I want a Nand unlock; but I'd like an easier way to push stuff in recovery so I can make intentional tweaks and protect the OS the rest of the time.

CM 6.0.1 has been released

Don't wanna post other peoples work... so go get it yourself through ROM Manager.

Anyone tried this yet?

I have. Great ROM. But the Bluetooth is still choppy. Is there a fix for this. This is the one and only reason I can't use this ROM. I need Bluetooth.
Sent from my Incredible using XDA App

Downloading it now. I've never used Rom Manager before and noticed there was CM 6.0.1, 6, and 6 RC3. Was CM 6 stable release newer than RC3? I've been on RC3 since it came out and it's been rock solid other than random reboots with wifi on.

where?? dont see.. cleared download cache

This is awesome, download now. Koush will update his thread soon, but for those who don't use clockwork app here is the download site
http://koush.tandtgaming.com/htc/inc/

ACD168 said:
This is awesome, download now. Koush will update his thread soon, but for those who don't use clockwork app here is the download site
http://koush.tandtgaming.com/htc/inc/
Click to expand...
Click to collapse
Thanks for the link, my phone was cutting off the download. Will try and post results later.

unreal2k said:
Thanks for the link, my phone was cutting off the download. Will try and post results later.
Click to expand...
Click to collapse
No problem man, you're welcome.

Is there a changelog for these?

rulevoid said:
Is there a changelog for these?
Click to expand...
Click to collapse
+1 [10 chars)

Unlike 6.0.0, 6.0.1 does not appear to be overclocked, and it is much more stable on my Inc. No reboots yet.

http://github.com/CyanogenMod/android_device_htc_inc
write /sys/module/lowmemorykiller/parameters/minfile 0,0,0,5120,5632,6144
write /sys/module/lowmemorykiller/parameters/check_filepages 1
+ # Power Management
+ write /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq 245000
+ write /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 998400
+ write /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor ondemand
+ write /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate 40000
+
service wpa_supplicant /system/bin/logwrapper /system/bin/wpa_supplicant \
-Dwext -ieth0 -c/data/misc/wifi/wpa_supplicant.conf
# we will start as root and wpa_supplicant will switch to user wifi

...still only seeing ~700MB of internal storage.

Update
I did S-off, upgraded the radio to 2.15 and installed CM 6.0.1.
I overclocked to 1.152 and i got 1450 in quadrant. So far so good.
I connected it to my computer and it asked me to format the internal memory, only 760mb shows up as total space to format though. Any thoughts?
Edit: Now under phone settings it shows 0.00B for internal memory and i get notifications for low disk space.
Edit2: Restarted the phone and now i'm in a boot loop. Back to SR 2.5 for now.

I am still unable to get facebook to sync with my contacts on this? 6.0.1, Any help please, I can get anything else working no problem. Works perfect with the Facebook for Sense...

Amin Sabet said:
Unlike 6.0.0, 6.0.1 does not appear to be overclocked, and it is much more stable on my Inc. No reboots yet.
Click to expand...
Click to collapse
That's great news! The instability / reboots made the previous versions nearly unusable for me. I look forward to trying this.

Does sling player work yet?

Could someone package an update.zip with the changes? I hate wiping for only a dozen lines of code when I JUST restored all my apps before 6.0.1 was released

Can anyone post the kernel version? I've heard that the kernel that comes with 6.0.1 isn't overclocked, however I'm still able to oc to 1.15
I did an install with no wipe, if the kernel and / or build number differs then I'll do a full wipe.

AaronBBrown said:
...still only seeing ~700MB of internal storage.
Click to expand...
Click to collapse
That's not the same as your 8gb of onboard storage. That's your app storage you really can't get to normally. If you installed the 6.0 final or 6.01 you will see your onboard 8gb storage in Astro File Manager. Main problem still exists though, the OS isn't scanning it for music and photos like it should. That's going to be fixed eventually.
This version is MUCH more stable for those who had reboots and black screen issues. It's only been about 12 hours but I haven't had an FC or any reboots yet. Just look forward to the fix mentioned above and Bluetooth getting finalized.
EDIT - an hour after posting this my phone was stuck with a black screen, no response for several minutes until it finally rebooted... oh well

[Q] Some problems in XGin4.0 2.3.4

Hi guys! I have to post in this general section just because I have not reached 10posts yet in "android development".
So I upgraded shpit's ROM from XGin3.0 to XGin4.0 just one hour ago, and i discovered two (maybe stupid) problems: i can't install Facebook and Applanet!
But system seems to work fine just for now.
Anyone can help me?
Thanks in advance.

achill3r said:
Hi guys! I have to post in this general section just because I have not reached 10posts yet in "android development".
So I upgraded shpit's ROM from XGin3.0 to XGin4.0 just one hour ago, and i discovered two (maybe stupid) problems: i can't install Facebook and Applanet!
But system seems to work fine just for now.
Anyone can help me?
Thanks in advance.
Click to expand...
Click to collapse
Reboot to xrecovery, clear cache and delvik cache..
then try to download again...

Working!
malungkot said:
Reboot to xrecovery, clear cache and delvik cache..
then try to download again...
Click to expand...
Click to collapse
Thank you man! I solved!

Hi, ive just installed Xging 4.0 and its great Rom but i have some problems, i hope you can help me to solve them:
- I cant get the Overclock: i put the X8oc.ko module into system/lib/modules and edit the permissions but nothing happens, after reboot i cant modify the Max or Min Cpu fercuency...
- I cant see the Mddi lag fix in system/lib/modules, thats not usefull in this rom??
ive been looking for this module because i have some lags in games.
thanks and sorry for my bad english.

leonardv128 said:
Hi, ive just installed Xging 4.0 and its great Rom but i have some problems, i hope you can help me to solve them:
- I cant get the Overclock: i put the X8oc.ko module into system/lib/modules and edit the permissions but nothing happens, after reboot i cant modify the Max or Min Cpu fercuency...
- I cant see the Mddi lag fix in system/lib/modules, thats not usefull in this rom??
ive been looking for this module because i have some lags in games.
thanks and sorry for my bad english.
Click to expand...
Click to collapse
first try this
reboot to xrecovery and flash xgin4
factory reset ( full wipe )
exit and with root explorer just and only copy X8oc.ko in system/modules
don't edit hw_config it's already configured
go to settings and and choose cyanogenmod settings
then go to performance and select cpu settings
there should be max and minimum set maximum speed on whatever works just don't try to get it too much high the higher freq won't always make the system better sometimes it won't even reboot and works fine but the speed isn't better than lower freq
u can use quadrant to find it out and check your cpu score when you increase freq your score should be higher if you noticed that it's not increased or it just got lower on score ! revert it back to lower freq and see if your phone works without reboots and hangs
and second
mddi module is preinstalled it is present on modules and yes it is not configured in hw_config but i believe it is loaded and the run command must be somewhere in firmware and maybe in lib files

dragunov_lq said:
first try this
reboot to xrecovery and flash xgin4
factory reset ( full wipe )
exit and with root explorer just and only copy X8oc.ko in system/modules
don't edit hw_config it's already configured
go to settings and and choose cyanogenmod settings
then go to performance and select cpu settings
there should be max and minimum set maximum speed on whatever works just don't try to get it too much high the higher freq won't always make the system better sometimes it won't even reboot and works fine but the speed isn't better than lower freq
u can use quadrant to find it out and check your cpu score when you increase freq your score should be higher if you noticed that it's not increased or it just got lower on score ! revert it back to lower freq and see if your phone works without reboots and hangs
and second
mddi module is preinstalled it is present on modules and yes it is not configured in hw_config but i believe it is loaded and the run command must be somewhere in firmware and maybe in lib files
Click to expand...
Click to collapse
Ok thanks ill try again.

Wipe partition cache and full wipe.
Sent from my X8 using XDA Premium App

[TELUS T959D Fascinate]-Running S.U.R.F.A.C.E ICS

First of all I would like to give credit where credit is due and say thank you to SamHaLeKe for all the work he put into this port and all the other Developers involved to bring ICS to the SGS
If you would like a full run down of this ROM and what is included as any new developments, please visit the ROM thread
Now off to the good bits ...
Install
I AM NOT RESPONSIBLE IF SOMETHING GOES WRONG AND YOUR PHONE CEASES TO WORK. THIS IS NOT A DETAILED WALK THROUGH BY ANY MEANS. I AM ASSUMING YOU READ ONE OF THE MANY OTHER TELUS THREADS THAT HAVE THE FULL INSTRUCTIONS INCLUDED TO PERFORM THE BELOW STEPS.
Note: I am not going to post all the links to files as I do not have the time to update them everyday when something changes. I will however post links to the ROM and Kernel threads for your reference.
I decided to start fresh (and I mean fresh) from stock FROYO with a full SD format and the works.
Step 1
Flashed back to stock with ODIN. Again I used FROYO but I am sure GB would work. If you want to start fresh as I did, go to options storage and format the internal SD (13 GB).
Step 2
Download the ROM and Glitch V13 kernel (what I used) and copy them to the SD card of the phone. I suggest removing any external SD as not to copy the files to the wrong spot (guess what I did LOL).
Step 3
Flash voodoo kernel from ODIN to root and install clockwork recovery making sure that you do not repartition in ODIN
Step 4 - Note: The older voodoo kernel gave an "assert failed" error trying to flash the ROM through recovery)
Boot into recovery and wipe cache and dalvik then flash the Glitch V13 kernel from zip and reboot. At this point you will most likely be boot looping but no worries everything is OK
Step 4
Pull the battery and then boot into recovery with volume up + volume down +power. Wipe cache and dalvik and flash the ROM from the ZIP
Let the ROM boot and then again boot to recovery and flash the essentials zip.
Voila you should be running S.U.R.F.A.C.E ICS, aint it beautiful?
I continued and flashed add on packs 1 and 2 but that is up to you
Now for my findings thus far ...
I am in no way a power user when it comes to my phone but I do play with it a lot. I have to say that this ROM seems to be the one of the smoothest to date and seems to take to our device nicely.
Battery has been nothing short of great for me. Through the week I can easily get 2 days out of it (work all day). Now I also try to minimize the drain by turning off whatever I don't need like WIFI seeing as there is none where I work.
I flashed the JL3 modem and it seems to work good for me but then I don't live where you do so you may have better luck with another.
The kernel included in the ROM (if you read the ROM post) is Glitch V14 pre which runs amazing as usual although still in the development stage. This kernel has a lot of new features that I will let you read up on yourself here
The ROM also includes supercharger and thunderbolt scripts (I admit I have little to no experience with these but I do know they help).
No FC's with this ROM other then the video camera but I have seen some posts regarding this and have not got around to working on it but will be I am sure very soon. It looks like just a file update maybe but too soon to tell.
Live overclock seems to work if I leave the voltage settings alone but that could just be a lack of experience in this area but it never hurts to try. If anyone has settings that are working for them I would love to know what they are. I have set the live overclock to 120% or 1.2ghz and it runs fine again if I do not change the voltage.
It's only been about 3 days since the install but this is what I got so far. I would recommend giving it a try for sure.
I know there are a few of us on this ROM so post up your findings here.
Thank you
Buck

Similar but running Glitch v14
Thanks for the write up Buck. I have been running this rom (Surface) for a few days also but I came from cm7 to this one. I have also been toying around with it over the last few days which has gotten me in a few tight spots lol. I have my Volt control set to 1304, no voltage changes and it runs flawlessly. The modem I put on was the JVT which also seems to work well.
What I have learn about Live OC:
First you set your clock speed in Volt control, then flip over to NStools (that is the easy part)
IMPORTANT.... If you choose to mess with this, make sure settings in NStools is NOT set to apply on boot or make sure you have a good recovery to go back to. Found this out the hard way
Click on live oc and you can make changes here... If you read the articale from Glitch on this it will help alot (found in the OP for T959D).
Live oc clocks up the cpu AND bus so it affects the gpu and memory along with the cpu (very important).
Findings... some settings work fine, 105, 106,110, 114, 116. 115 seems to have issues and provides lower performance considerably lower.
I use AnTuTu to check how things are working. That being said, if you apply set at boot and you hit a setting that first craps out the phone, causes a reboot then your going to be in a bootloop or it will start reboot start reboot. This is why you DON'T do this or like I said earlier have a good recovery handy.
Right now I am only running 1304 and 100% and everything is fine except the prior mentioned FC on video cam. Oh I should mention also I am running the Lazy governor atm which also seems to work fine (default is on demand).
Anyways

Well I think we may have broken the record for the longest 2 posts on the first page in xda history lol. Happy flash year everyone
Sent from my GT-I9000 using XDA App

Didn't notice you guys mention this, but Glitch V14 has an option in CWM to clear NSTools settings. It's right above the option to clear voltage settings under the Glitch Menu.
It works well, believe me!!
-Maniac

I'm on ICS!
Thanks bucky!!
I'm on ICS now, with Glitch v14 but I have a few questions I'm hoping you can help with:
- The screen layout / icons seem shrunken to me? As well as the notification bar. General text and keyboards are fine. Is there a fix I can apply?
- With further versions from Surface can I just flash over top of what I'm on now or do I need to go back to stock?
- Do I need to use TI to bring all my apps back up (I get "App X has stopped working"), or is there a quicker way?
Thanks again.

baino said:
Thanks bucky!!
I'm on ICS now, with Glitch v14 but I have a few questions I'm hoping you can help with:
- The screen layout / icons seem shrunken to me? As well as the notification bar. General text and keyboards are fine. Is there a fix I can apply?
- With further versions from Surface can I just flash over top of what I'm on now or do I need to go back to stock?
- Do I need to use TI to bring all my apps back up (I get "App X has stopped working"), or is there a quicker way?
Thanks again.
Click to expand...
Click to collapse
Well the shrunken icons are because of the DPI setting in the build.prop file. You can change it with a text editor (I use root explorer) to the default value of 240. It is listed as LCD Density.
To flash another version you should be fine to flash over what you have with a factory reset and wipe cache
Apps well I usually just re-download from the market. I have used TI and found I get the best result if I restore without data. Remember not all apps are compatible with ICS yet so that could cause issues as well.
Enjoy the ICS I know I do.

bucknetbucky said:
Well the shrunken icons are because of the DPI setting in the build.prop file. You can change it with a text editor (I use root explorer) to the default value of 240. It is listed as LCD Density.
To flash another version you should be fine to flash over what you have with a factory reset and wipe cache
Apps well I usually just re-download from the market. I have used TI and found I get the best result if I restore without data. Remember not all apps are compatible with ICS yet so that could cause issues as well.
Enjoy the ICS I know I do.
Click to expand...
Click to collapse
Hey Guys,
Why not just use rom toolbox? the build.prop tweaks give ya a niffty slider... no hackin involved...

Anyone got the files for stock GB?

cowvun said:
Anyone got the files for stock GB?
Click to expand...
Click to collapse
you looking for T959D?

Yes
Sent from my T959D on Darky's Rom 10.3.

Rom toolbox worked for me, it's looking beauty now. Everything seems to be working well, except I get the occasional crash on dialer / contacts. Anyone else having the same?
I'm running LauncherPro, what are you guys running?

baino said:
Rom toolbox worked for me, it's looking beauty now. Everything seems to be working well, except I get the occasional crash on dialer / contacts. Anyone else having the same?
I'm running LauncherPro, what are you guys running?
Click to expand...
Click to collapse
Nothing like that here maybe the way it was flashed I am not sure. Have you added anything?
Sent from my GT-I9000 using XDA App

Only flashed the add-ons, and the launcher pack. Changed the LCD density and that's about it. I'm thinking it might be because I didn't wipe the sd card and start clean.

baino said:
Only flashed the add-ons, and the launcher pack. Changed the LCD density and that's about it. I'm thinking it might be because I didn't wipe the sd card and start clean.
Click to expand...
Click to collapse
Depends what you did before flashing. I had issues after flashing a lot and never deleting anything lol
Sent from my GT-I9000 using XDA App

Working NSTools values for OC and UV
CPU:
Governor = Lazy
Min CPU = 100 (109 after live OC)
Max CPU = 1200 (1308 after live OC)
OC Value = 109%
Deep Idle = On
Custom Voltage
Arm:
1400 = unchanged
1304 = 1375
1200 = 1325
1000 = 1225
800 = 1150
400 = 975
200 = 875
100 = 875
Int Voltage
1400 = Unchanged
1304 = 1150
1200 = 1125
1000 = 1075
800 = 1050
400 = 1025
200 = 1025
100 = 925
Just set these values tonight and so far all is good and no crashes or reboots. See if it helps the battery as the days go by. Give it a shot or post your working values for others to try.
AND NO I NEVER SLEEP

bucknetbucky said:
Working NSTools values for OC and UV
Click to expand...
Click to collapse
Thanks for posting your OC and UV values. I'll give those a try.
I've been experiencing random crashes and reboots (woke up this morning to a dead phone). It was plugged in overnight but crashed at some point and did not charge. Battery voltage dropped down to almost nothing.
Anyone else experiencing random reboots?
I was using an OC value of 1304 (no live OC). UV values left stock. Ondemand governor, Deep idle ON, noop IO scheduler.
I did not format my sdcard prior to install. Just did a data wipe/factory reset, format cache and dalvik then installed according to the instructions. Installed Add-on Essentials and Add-on Pack One. All other apps were reinstalled from the market (after using market enabler and changing DPI back to 240 using ROM manager).
Everything works great except for the random crashes and reboots. I'll probably start from scratch again when v1.3 comes out (except I will format the SD card). Maybe even start from stock Froyo as recommended in the OP.
EDIT:
Tried the settings and my phone was not happy. It froze when setting the UV values. My phone seems to have a problem with any live OC value other than 100%. As soon as I increase it I lose all stability.

1.3 released and I am running it.
Sent from my GT-I9000 using XDA App

Settings
I'm on Glitch v14 pre5 and I just clocked it up to 1300 and added 104% live OC for a stable 1352, no undervolting battery sitting @ 68% 1 day 22hrs. I did turn off some stuff I dont use and had data running on and off for the whole time.
For the guys that are having problems with flashes, I generally wipe everything I know its a pain but I don't experience any problems either. I also wait until i have a full battery too. It seems to pay off in the long run...
Happy Flashing!!!

Phone and contacts are working well now, but I can't get app data to save. For example some apps t's&c's keep asking for approval everytime I open the app. Also beautiful widgets skins keep reverting back to default. I'm going to wipe, format the SD card and install 1.3 from stock Froyo. here's hoping.

bucknetbucky said:
1.3 released and I am running it.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Just wiped and running 1.3 now. So far seems much better and faster than my last flash. You guys know of any way to change the haptic feedback intensity in ics?

GTA 3 black screen...

I have CM 7.2 by pcfighter .32 kernel , 256 mb sd swap and SD BOOST, got around 90mb of free ram when close apps.
CPU overclocked to 825, sometimes i set to 768 to avoid kernel panic.
I have downloaded gta 3 sd files and apk for low-end devices.
put data files on right place, installed apk.
Run GTA 3, accepted licence activation, pressed back button and minimized game, then launched from status bar.
I see just black screen.
I tried this on 2.3.7 .29 by mur4ik rom too. Still a black screen.
Please tell me where is mistake, or give me a link u used to download gta 3.
Thanks.

alendautovic said:
I have CM 7.2 by pcfighter .32 kernel , 256 mb sd swap and SD BOOST, got around 90mb of free ram when close apps.
CPU overclocked to 825, sometimes i set to 768 to avoid kernel panic.
I have downloaded gta 3 sd files and apk for low-end devices.
put data files on right place, installed apk.
Run GTA 3, accepted licence activation, pressed back button and minimized game, then launched from status bar.
I see just black screen.
I tried this on 2.3.7 .29 by mur4ik rom too. Still a black screen.
Please tell me where is mistake, or give me a link u used to download gta 3.
Thanks.
Click to expand...
Click to collapse
sorry no support for sw piracy this is the wrong place

do you have pcf v5 or v6?

justsayin' said:
do you have pcf v5 or v6?
Click to expand...
Click to collapse
v6
I fixed it
Just downloaded another sd data and reinstalled apk.
Can I suggest everyone to get Autokiller Memory Optimizer in combination with SD speed increase and SD swap(256) mb.
When i exit GTA 3, i got 110 mb of free RAM. Incredible.

Nice, but how do you use swap? I used swapper like in tutorial but when i write free in terminal emulator I get swap: 0 0 0 0. How can i fix it?