Related
I seem to be having a problem connecting to my wireless router.. I can't get an IP. I keep getting a 169.something IP.. I restarted the router, it has the newest available firmware, tried connecting while I was right next to the router, deleted all the references to the IP in the registry.. and then tried all that again with no encryption on the router. Basically everything I could think of. It works after a hard reset or when I flash the ROM with any other rom.. But only connects once.. not more..
Worked with the original ROM (I-Mate JasJam.. Arabic version).. Windows VI Black.. 3 DES and the Testra I-Mate).. Works the first time.. then never after that..
Any suggestions?
That's... odd. Have you tried flashing to the original ROM to see if it still works properly? Also, and this is just a blind guess, is your SSID pure ASCII or do you have Arabic characters in it? I'm not sure that's even allowed in the 802.11 specs, but who knows.
the SSID is pure ASCII.. and I tried flashing back to the original ROM and it's still the same thing..
It's not a router problem either cuz the problems is the same with other routers
What do you mean by "still the same thing" - it still works with the old ROM or it still doesn't work like the other ROMs?
As in still connects the first time but never after that.
When you downgraded to your original ROM, did you downgrade the OS only, or the whole thing? If you downgraded the ExtROM, did you allow the customizations to install from it after hard reset?
If you didn't downgrade the radio, try it. Technically, the radio ROM has nothing to do with wifi, but I think it would be beneficial to have your Hermes as close to its original state as possible when troubleshooting.
What brand of router are you using?
169.254.x.x is APIPA; basically, the DHCP isn't working. Can you confirm that you have enough IP's in the DHCP range? and/or, create a reservation for the MAC address of the phone?
Perhaps you are limiting connections to certain MAC addresses only? or only to 'known' MACs?
He said this is happening with other routers as well, so DHCP range, etc, probably wouldn't apply. Then again, if they're all set up the same way...
Try giving your device a static ip adress, see if that helps.
I downgraded everything and allowed the ExtRoms to be installed. I also tried the Static IP address route but to no avail.
Haven't tried MAC Address allocation yet though..
I realized that after I flash it I test the wifi connection and then install some programs right away.. could one of the apps be causing this?
I've tried several builds:
Darkstone Froyo
DarkStone FroyoStone
mattc Froyo with Sense
mattc Froyo without Sense
shubcraft
Xcelsior
mccm v1.7
WiFi just does not work at home. It'll connect, but I can't actually browse anything. It comes back immediately as a "page not found" error. Today I took my phone around town specifically to test WiFi on other networks. It worked perfectly on two open networks. There were no issues at all. It works at my office as well.
My network at home is wired as:
Internet --> DLink Gamer Lounge (wired router with special features) --> Linksys WRT54G wireless router
The DLink has DNS and DHCP services. The Linksys has none and is assigned a static IP.
My network at work is wired as:
Internet --> DLink Gamer Lounge --> everything else including a Linksys WRT54G setup just like at home
There is a Windows Server setup to take care of DNS and DHCP. The Linksys has same setup as at home.
At home, I disconnected the DLink, enabled DHCP on the Linksys, then my Android phone worked on wifi just fine.
I reconnected wired router and reset all settings. Android wifi doesn't work anymore.
I don't think my wired router is incompatible. I'm wondering if the wireless router not being the DHCP agent has anything to do it. Other wireless devices connect fine like this. My phone in WinMo connects fine. My friends' iPhones connect fine. My friends' native Android phones connect fine. Every wireless device (except HD2 Android) connects to the network and works just fine.
Anyone have any suggestions?
Is there a route tracing program for Android? Or something that will show me all the IP information (including DNS)?
Update:
DarkStone1337 said:
Because you have no DHCP on your wireless router, your IP address and DNS server and default gateway settings aren't being set by Android. No idea why. You'll need to do this manually in Android by pressing the windows button in the wifi network settings and setting the right values from there.
Click to expand...
Click to collapse
I just used an app to check IP settings. IP address, subnet mask, gateway, DNS, and everything are being set properly (there is a DHCP server on network, just not on WiFi router). I tried to setup a static IP address and other settings. Whenever I try to connect that way, it gets to "Obtaining IP address" and then fails, cycling through the whole process. Is it possible the code for IP stack (or IP Tables) in these builds of Android are not complete?
Update 2:
DarkStone1337 said:
Not an app, but using ADB logcat is sufficient enough.
If you have adb set up then follow this: https://sites.google.com/site/androidhowto/how-to-1/save-logcat-to-a-text-file
Click to expand...
Click to collapse
Just read about ADB (Android Debug Bridge) briefly. I think this will be a bit out of my league. I'm not that familiar with Android / linux. I'll post in the other thread asking if someone else more skilled can grab one. If not, I'll see about trying to figure it all out this weekend.
Same issue
FreakyFerret said:
I've tried several builds:
Darkstone Froyo
DarkStone FroyoStone
mattc Froyo with Sense
mattc Froyo without Sense
shubcraft
Xcelsior
On all of them, WiFi just does not work. It'll connect, but I can't actually browse anything. It comes back immediately as a "page not found" error. Today I took Matt's Froyo with Sense around town specifically to test WiFi on other networks. It worked perfectly on two open networks (Quizno's and McDonald's). There were no issues at all.
My network was wired as
Internet -- Wired router (with special features) -- wireless router
The WiFi router was basically treated like a switch with its DHCP turned off. I disconnected the wired, enabled DHCP on the wireless, then my Android phone worked on wifi just fine.
I reconnected wired router and reset all settings. Android wifi doesn't work anymore.
I don't think my wired router is incompatible. I'm wondering if the wireless router not being the DHCP agent has anything to do it. Other wireless devices connect fine like this. My phone in WinMo connects fine.
Anyone have any suggestions?
Is there a route tracing program for Android? Or something that will show me all the IP information (including DNS)?
Edit: It should be noted other Android phones (that came with Android) do work fine. Just these HD2 builds is the problem.
Click to expand...
Click to collapse
I just want you to know I'm in the same situation as you. My router is a Belkin Wireless N router (WPA2 encryption). I get a valid IP address and I can ping the router but no DNS or access past the router. There was an earlier version of an Android build (I think a MattcFroyo) that worked with my wifi set-up. But I need BT headset support and the Darkstone build seems to be the only one that reliably works with my BT devices. (BlueAnt T1 & Motorola EQ7)
Please let me know if you find a solution that works!
Thanks.
Sept 4 Update. The only version that I have found that provides both Wi-fi connectivity and BT head set is the Shubcraft version 1.4 for my router configuration. Version 1.5 doesn't and neither do the latest Mattc and Darkstone builds.
Hell, I can't even get my Wifi working at all. Darkstones V1... Wifi just says "Error". Have the latest zImage, and everything. :/
Shushunmire said:
Hell, I can't even get my Wifi working at all. Darkstones V1... Wifi just says "Error". Have the latest zImage, and everything. :/
Click to expand...
Click to collapse
jinhenry, I'll let you know.
Shushunmire, are you using HD2Froyo or FroyoStone (clean or Sense)? Also be sure to post in Darkstone's thread that relates to the build. I know HD2Froyo v2 was giving error for wifi, but his latest update fixes that.
I tried various market apps to do network diags on the phone. All they offered was basic ping. When trying to ping anything on the wifi, it just fails right away. It's like it's not even seeing the network and just saying no network around. I even tried to ping the phone's own local IP and it failed. I tried looking for a traceroute type app, but there was none.
I installed Cirtex app. On cell connection, it pulls up the IP info of the wifi (but cell data works):
Device IP Address:{cell IP}
Interface name:/usb0(usb0)InetAddress:/{Ip of wired router, DHCP server, DNS server}
Interface name:rmnet0(rmnet0)Inetaddress:/25.1.238.x (don't know)
Interface name:lo(lo)InetAddress:/127.0.0.1
On wifi connection, it gives error:
Can not get te IP Address for the device. (errors their's)
Interface name:eth0(eth0)InetAddress:/{correct wifi ip}
Interface name:usb0(usb0)InetAddress:/{correct wifi ip}
Interface name:lo(lo)InetAddress:/127.0.0.1
If I use a static IP, and set the gateway to the actual network gateway (wired router, DHCP server, DNS server), phone tries to connect until it gets to the "Obtaining IP" stage, then it fails and cycles over. If I set the gateway to the wifi router (which is no more than a wifi access point) it will connect.
To repeat cause I know you have a lot going on: other wifi devices work on this network fine (using static or dynamic ips) including windows laptops, mac laptops, xbox, Wii, iphones, winmo phones (this one even), and even other android phones.
If I set the wifi router as the gateway (plug internet directly into it and turn on DHCP on wifi router), everything works fine. I don't even change its static IP.
Hopefully some of this will help. :/ The more I play around with it, I get the feeling the IP stack is the cause.
I AM HAVING THE SAME PROBLEM!!!! my lil bro got an htc hd2 as well n we got them the same day n when i flashed android on his and mine... his wifi was working while mine was not and i have tryed so many different builds but nothing solves the problem...it searches but at the end it says unable to scan networks....anyone plz help i really need wifi
p.s we both are on....
rom: core cell series
build: hd2 froyo v2.1
his hd2 works perfect while my wifi is not
jinharry said:
I just want you to know I'm in the same situation as you. My router is a Belkin Wireless N router (WPA2 encryption). I get a valid IP address and I can ping the router but no DNS or access past the router. There was an earlier version of an Android build (I think a MattcFroyo) that worked with my wifi set-up. But I need BT headset support and the Darkstone build seems to be the only one that reliably works with my BT devices. (BlueAnt T1 & Motorola EQ7)
Please let me know if you find a solution that works!
Thanks.
Click to expand...
Click to collapse
have you tried setting the router to use G only? i had an issue with the newer builds on a d-link 635 that was the same, it woudl work then suddenly woudnt work at all, rebooting the phone didnt help, changing the router to use G only instead of mixed seemed to fix the issue
Here's my issue. On my phone I could connect to wireless fine, my two sons liked Android on the hd2 so much that we picked up 2 more hd2's, that's where the problem started. Any one of the phones can work on wireless just fine... but try and connect any of the others and while they do connect, they don't work. Any of them.
It's almost as if they are seen as the same device or something. Some kind of unique id is missing or something.
Ducter said:
Here's my issue. On my phone I could connect to wireless fine, my two sons liked Android on the hd2 so much that we picked up 2 more hd2's, that's where the problem started. Any one of the phones can work on wireless just fine... but try and connect any of the others and while they do connect, they don't work. Any of them.
It's almost as if they are seen as the same device or something. Some kind of unique id is missing or something.
Click to expand...
Click to collapse
are they using the same builds? its possible that the mac address being used is the same and the router sees it as the same device
Richy99 said:
have you tried setting the router to use G only? i had an issue with the newer builds on a d-link 635 that was the same, it woudl work then suddenly woudnt work at all, rebooting the phone didnt help, changing the router to use G only instead of mixed seemed to fix the issue
Click to expand...
Click to collapse
Didn't help Thanks for suggestion though.
unless it has changed recently, all HD2-android builds are using the same MAC-address. So this could very well be your problem.
Ducter said:
Here's my issue. On my phone I could connect to wireless fine, my two sons liked Android on the hd2 so much that we picked up 2 more hd2's, that's where the problem started. Any one of the phones can work on wireless just fine... but try and connect any of the others and while they do connect, they don't work. Any of them.
It's almost as if they are seen as the same device or something. Some kind of unique id is missing or something.
Click to expand...
Click to collapse
FreakyFerret said:
jinhenry, I'll let you know.
Shushunmire, are you using HD2Froyo or FroyoStone (clean or Sense)? Also be sure to post in Darkstone's thread that relates to the build. I know HD2Froyo v2 was giving error for wifi, but his latest update fixes that.
Click to expand...
Click to collapse
I'm using FroyoStone (w/Sense).
And yeah, will do that. I just figured it wasn't working at all until I saw your post.
I use currently mattc 1.5b w/sense and had (have) the same problem with
DHCP is on. I allways got the status "Obtaining IP address" and nothing happen.
I played a little bit with the static IP settings...I set DNS 1 equal the the gateway entry and then wifi works....but only static.
I think this is a router issue...I use Speedport W 502V.
I doubt it's a router problem since all other devices work perfectly.
same issue, please give your attention, developers, thanks.
I've had the exact same problem with my Wi-Fi using several Android builds. Tried static IP and every possible setting I could find and solved it by add the Mac-adress in my router setting. (192.168.1.1) and now it works perfectly. I'm now using shubCRAFTv1.3
Hope you can fix your problem this way. Cheers.
Sent from my HTC HD2 using XDA App
I'm having issues with Wifi too. I'm also currently using mattc Leo + Froyo w/Sense 1.5b. My problem isn't that the phone doesn't connect via wifi... it does. The problem is that after it connects the connection seems to go dead/times out after about a minute or two.
For example, after installing the build and running through the setup, i connect to wifi, then sign in with my gmail account. This all works as it should. Then by the time I want to sign in to my facebook/twitter accounts during that same setup sequence, it no longer can connect to the internet. My suspicions of the connection having a "timing out"-like occurrence was then confirmed when I turned off wifi, and switched it back on. Everything would work and sync for about a minute, then it would cut out again (but it would still show a full strength connection via wifi). It's a bit of a strange one.
I used Energy's build before trying this one, and WiFi worked flawlessly. So I'm assuming its not my router, but something up with my device and/or its settings.
Thanks in advance for any tips/help.
snozze said:
I've had the exact same problem with my Wi-Fi using several Android builds. Tried static IP and every possible setting I could find and solved it by add the Mac-adress in my router setting. (192.168.1.1) and now it works perfectly. I'm now using shubCRAFTv1.3
Hope you can fix your problem this way. Cheers.
Click to expand...
Click to collapse
What do you mean by you added your phone's MAC address to the router? Where exactly in the router? Guessing you mean you set your phone to use a static IP, then set your router's DHCP client to always assign that IP to the phone?
wibblewobbles said:
I'm having issues with Wifi too. I'm also currently using mattc Leo + Froyo w/Sense 1.5b. My problem isn't that the phone doesn't connect via wifi... it does. The problem is that after it connects the connection seems to go dead/times out after about a minute or two.
For example, after installing the build and running through the setup, i connect to wifi, then sign in with my gmail account. This all works as it should. Then by the time I want to sign in to my facebook/twitter accounts during that same setup sequence, it no longer can connect to the internet. My suspicions of the connection having a "timing out"-like occurrence was then confirmed when I turned off wifi, and switched it back on. Everything would work and sync for about a minute, then it would cut out again (but it would still show a full strength connection via wifi). It's a bit of a strange one.
I used Energy's build before trying this one, and WiFi worked flawlessly. So I'm assuming its not my router, but something up with my device and/or its settings.
Thanks in advance for any tips/help.
Click to expand...
Click to collapse
sounds like the same issue i had, i had to set my router to use G only rather then mixed g/n to fix the issue
FreakyFerret said:
I've tried several builds:
I don't think my wired router is incompatible. I'm wondering if the wireless router not being the DHCP agent has anything to do it. Other wireless devices connect fine like this. My phone in WinMo connects fine.
Anyone have any suggestions?
Edit: It should be noted other Android phones (that came with Android) do work fine. Just these HD2 builds is the problem.
Update:
I just used an app to check IP settings. IP address, subnet mask, gateway, DNS, and everything are being set properly (there is a DHCP server on network, just not on WiFi router). I tried to setup a static IP address and other settings. Whenever I try to connect that way, it gets to "Obtaining IP address" and then fails, cycling through the whole process. Is it possible the code for IP in these builds of Android are not complete?
Click to expand...
Click to collapse
I had problems before with a similar setup, and I can tell you that NOT having the DHCP on the router (gateway out) is the issue. You have to remember that "these HD builds" are still in development with WIFI issues still being ironed out.
My advice, try using fixed IP assigning (on wireless router) using the phone's wifi adapter mac address.
Right now your phone is going to the wifi router who will be sending packets to the DHCP server and back to wifi router so that it goes out. Also usually, there tends to be a conflicts because some DHCP clients just assume that the server for DHCP is the gateway too.
or... Check that your DHCP server (if another machine) is doing internet sharing, in case devices try to use its address as a gateway, which will then go out anyway through the wifi router.
The fact you report may be in my oppinion, useful for the devs (eventually), but dont get high hopes for this to be on the immediate to-do list
I just bought a Rogers arc and everything is great so far, except the wifi. For whatever reason when i try to connect to my home network, although it recognizes it and connects i get a "limited connectivity" which effectively does not allow me to use wifi at all. ive tryed rebooting the phone and reseting my router (which is a D-link DI-524.) any help would be appreciated.
you could go in the router settings and register the phones mac address to a ip of your choice. it should do the trick i think...
I finally figured out what the problem was, i had to update the firmware on the router and then manually add the MAC address like dogggie said and after a reboot voila!
I don't want to make another thread since my problem is similar to this one. So in my school there is a hiden Wi-FI network and it has got a password, but we know Name and Password, so we can connect to Wi-Fi. But here is the thing: My friend who has SGS2 connect's without any problems, but everytime I try to connect to Wi-FI i get "Limited Connectivity" mesage. Is there any way to fix this? Can I somehow get Gateway and Netmask from router, so I can set static IP on my phone or sometheing like that?
Thanks for answers.
SEK610i said:
I don't want to make another thread since my problem is similar to this one. So in my school there is a hiden Wi-FI network and it has got a password, but we know Name and Password, so we can connect to Wi-Fi. But here is the thing: My friend who has SGS2 connect's without any problems, but everytime I try to connect to Wi-FI i get "Limited Connectivity" mesage. Is there any way to fix this? Can I somehow get Gateway and Netmask from router, so I can set static IP on my phone or sometheing like that?
Thanks for answers.
Click to expand...
Click to collapse
Zanimivo, na kero šolo hodš?
I have the same problem. Hidden Wi-Fi in school, limited connectivity. Works for some people, doesn't for most.
I have used CM7 for some time and the Wi-Fi worked with it, but I flashed the stock ROM back and now, again, it doesn't work.
Oo, another one form Slovenia Lep pozdrav. Šola je pa TŠC Kranj.
It also worked for me when I was testing Offical Beta ICS, but now I am back on stock 2.3.4 and all I can get is limited conectivity
tsckr
tehniskikranj
Same school.
Today it works. I have just manual set gateway, DNS servers, netmask and my own IP.
Cool. Mind sharing the values you used?
My Wifi connected to my home router perfectly until I flashed the custom rom.
Now it wont work. the phone recognizes my network, then tries to connect but it pauses at the obtaining ip address bit and doesn't connect?
I tried to restart the router. It doesn't work.
I tried to reflash the rom or offical rom (KE7). It doesn't work.
I also tried to delete the file /data/misc/dhcp/dhcp_list, but there are no "dhcp_list" file inside 'dhcp'
Do anyone have another way to solve this problem?
Thanks
Could be a problem with the router, are other devices able to acquire IP addresses from it correctly?
Perhaps you should assign a static IP to see if that makes a difference.
I am on KE7 stock rom with root and had this problem too. It just started yesterday and got stuck at obtaining ip adress. So I switched WIFI off and flight mode on and after some seconds wifi on and flight mode off and it connected. I also noticed that now sometimes when it is in standby it disconnects from the wifi network (but wifi is still ON) and when I wake it up it connects to my network.
Me too, same problem.
If wifi is ruled on "sleep when screen turn off", it don't wake when screen turn on.
It stay on " searching for IP adress...".
For the moment, I'm forced to leave wifi on "never" and I use Juice defender for disabling wifi on screen off.
I really think it's a common pb with SGS 2. May be it will be fixed with 2.3.4.
Same problem. I 'fix' it by turning off wifi then turning it back on and it gets an IP address immediately.
same problem here with a dlink dir-615 router. from time to time the phone can't get an ip, and it only works if i reboot the router. didn't try with another router yet ( well, i connected to a few more but not frequent so i can see if there are problems), but i ordered a new one anyways since the dlink also crushes my battery too.
try posting the brand/model of the router you have problems with, maybe there's some specific ones that are troublesome.
d-link dir-615 here / ke7 stock - rooted
I also have a dlink router. But I get the same problem with a Belkin.
With my first SGS, no problem. I really think it's a specific issue on SGS2.
I'd read in some place that 2.3.4 will fix some wifi problem known for the moment on 2.3.3...
Let's see...
I'm seeing this with both my home router (Netgear WNDR3700) and my office router. Disabling & re-enabling WiFi on the SGS2 solves it -- fortunately, it's easily accessible on the notifications panel.
Same thing with Dlink dir 815.
Sent from my GT-I9100 using XDA Premium App
Same thing here with Draytek 2820 router, all other devices (PC's Phones, PDA's etc) have no problem. SGS2 however needs WiFi turning off when waking from sleep to get it to obtain an IP address again. However my HD2 also running Gingerbread 2.3.3 works faultlessly.
KF2 seems, for me and some others, fix the problem...
hi
lucky me, i thought im the only 1 having problem with wifi
my problem, same as the others
the wifi try to connect (obtaining IP) and then disconnected
it will scan again, same thing will happened
try with all type of protocols, wifi b,g,n wep, wpa, no passwd
results still same
try to connect wifi at my office, results also the same
im on KF1 using dlink 615
hopefully someone can help us
tq
Just got my Galaxy S2 today. Cannot connect to wifi network on G or mixed mode, with or without security - just tries to obtain an IP address. Ridiculous.
Any help ? Quick search on Google doesn't bring up too much. There does seem to be an app called "FXR Wifi" but I don't expect to use that on a brand new phone.
Update: Upgraded my router's firmware (WRT54GS) and it works !
I have the same problem with my SGS 2. I can't connect to an AP - NETGEAR DG834G.
I found a partial solution to use my phone with my AP until I solve the problem. In the Wi-Fi settings menu enter Advanced mod and set the IP address, Gateway, Netmask, DNS1 manualy (by touching <Use static IP>). If you don't know what IPs you have to set for IP address, Gateway, etc. just connect with you laptop or desktop and use the settings from your computer. Just make sure you type a different IP address in your mobile (not the one from your computer - for example in you computer you'll find something like this: 192.168.0.3, you'll have to type in your mobile something like this: 192.168.0.10). The rest of the settings have to be identical.
Good luck!
To solve this "obtaining ip address problem". Set the following manually in the advanced configuration and save it.
1. ip address(your choice).
2. subnet mask(255.255.255.0).
3. default gateway(192.168.1.1).
4. dns servers(8.8.8.8,8.8.4.4)
Note: The above given values are the most commonly used, you change it if you want so.
After entering these values manually(and correctly), it will connect to the networ in 1 or 2 seconds.
like mine SG s2, wifi connects works perfectly at home and friends place,
but stucks at obtaining ipaddress for wifi, at the mall and college, ( where it needs first login page for authentication) ( or to agree user terms and regulation),
any idea, how to fix this issue.
Thanks
mine also does this where it doesn't get an ip. Reboot your router or just disable and re-enable the access point feature on the router and it should work without having to reboot it
Sent from my GT-I9100 using Tapatalk
but at university?college or mall, we dont have access to router.
any other idea to fix this
Thanks
Hey guys! Did you find a fix for this problem? I have the same thing happening right now. I tried at different places, home and country house with Zyxel P660HN and Cisco E4200 respectively. Stuck at obtaining IP address...
XSCounter said:
Hey guys! Did you find a fix for this problem? I have the same thing happening right now. I tried at different places, home and country house with Zyxel P660HN and Cisco E4200 respectively. Stuck at obtaining IP address...
Click to expand...
Click to collapse
Search xda with 'wifi rare' and 's2 wifi not working'.. U can find few threads dealing with wifi problem..
Sent from my GT-I9100 using XDA Premium App
So, yh...lately i have had the same problem with the wifi of my house, then it doesnt connect and says "Obtaining IP address....", i try disconnecting the router of my pc and restarting the phone and sometimes it works and other times doesnt.
So my question is obviously, how can i fix this?
I've read that this is a usually problem in android and i tried to set the static IP address and it says "Connected to....", however it is not connected, then i dont get any internet...
Im using Hyperion 8 with some tweaks...
Droq said:
So, yh...lately i have had the same problem with the wifi of my house, then it doesnt connect and says "Obtaining IP address....", i try disconnecting the router of my pc and restarting the phone and sometimes it works and other times doesnt.
So my question is obviously, how can i fix this?
I've read that this is a usually problem in android and i tried to set the static IP address and it says "Connected to....", however it is not connected, then i dont get any internet...
Im using Hyperion 8 with some tweaks...
Click to expand...
Click to collapse
either your internet connection isnt strong enough or try reflashing wifi drivers
http://forum.xda-developers.com/showthread.php?t=1556810
u can try this tweak brooo
Press Thanks if i help u
Droq said:
So, yh...lately i have had the same problem with the wifi of my house, then it doesnt connect and says "Obtaining IP address....", i try disconnecting the router of my pc and restarting the phone and sometimes it works and other times doesnt.
So my question is obviously, how can i fix this?
I've read that this is a usually problem in android and i tried to set the static IP address and it says "Connected to....", however it is not connected, then i dont get any internet...
Im using Hyperion 8 with some tweaks...
Click to expand...
Click to collapse
I suppose that you are using hell's fusion #50.Just flash the stock wifi drivers from white's thread.
Link: http://forum.xda-developers.com/showthread.php?t=2027326
Sent from my GT-S5360 using xda premium
I've had a similar problem.
Try these suggestions, but before that, read my bottom suggestion, that may be the cause.
Try flashing the WiFi modules again, you have a choice of stock drivers and ones for custom kernels but I believe it's only for whitexp's kernel. Another way to verify if that is the cause, is to go to your WiFi settings and see if in the MAC Address field it displays it, if it says unavailable then this is your fix.
Check your router's settings, in my case I'm set to receive default IP address on my computer, have typed in my actual IP address and everything else such as DNS, gateway, etc, on the router's configuration.
On your Galaxy Y, I believe you're just supposed to leave it to DHCP, like to receive IP and everything automatically
Make sure your phone's MAC Address is not on the router's blacklist, blocked, etc.
By the way, I think on Hyperion they say it has Droidwall, many people have complained about some roms that they cannot use WiFi and they were advised to turn off the firewall (Droidwall) from somewhere in the options or if it has an app itself and they then get their wireless back.