Related
We just bought an '08 Altima with the bluetooth option. I can pair the XV6800 with no problem, but quality sucks. It is super choppy on my end and the person on the other end can't hear me at all. I tried my wifes XV6800, same thing. I can pair my old E815 and it works perfectly, so it's not the car. I tried a hard reset, no difference.
I tried loading dcd's clean rom 1.6.7, no difference. Is the BT stack upgraded in this rom?
Is there a newer BT stack out there that I could try?
Its worth downloading and trying the Jetware BT Extensions and see if that helps....but usually it does not change quality so much as enable functionality.
http://www.jetwaremobile.com/
Brad
Thanks for the suggestion, but it didn't help.
Developer help with Infiniti/Nissan Bluetooth?
I've got the exact same issue with an '07 Infiniti G35 w/navigation. I've been doing lots of reading on the xv6800's bluetooth, have tried DCD's and Custel's roms, and was just about to start my own thread, but I'll bet our cars are the same bluetooth/rom wise.
Jetware didn't help me either.
Here's the best fix I've found and it works for me consistently.
-Whence the option's available depending on whether you're dialing out or receiving, click the "use handset" button (transfers call to the xv6800).
-Shortly after press the "phone" button (transfers call back through car).
-Should work as expected after that.
Anyway, at this point I'm hoping one of the kind devs on this forum (DCD or Custel to name just two of many) might find a sec to help us out, although I'm aware and appreciate the fact that many other users are keeping them very busy on their own projects.
I'm assuming the xv6800's hardware would be most similar to other HTC pda phones (not sure what happens between GSM and CDMA devices), so here's a list of their phones who's bluetooth does work with my car (from here). It supports the bluetooth in 144 phones total.
Kaiser (wasn't working with stock rom, but works after this patch from HTC)
Hermes
Atlas
Wizard
Apache
Magician
Harrier
HTC pda phones that don't work with my car (at least not 100%).
Vogue
Elf
Titan
The Titan DOES work with an '07-'08 Infiniti G35 WITHOUT navigation (buy more, get less ).
In addition to the stock Verizon rom I've tried DCD's 1.6.1, 1.6.7, and Custel's 1.1 with no change in the symptoms.
It's my understanding the dev community thinks modding the Vogue's bluetooth for the Titan shows the most promise. I found this thread mentioning an alternative, but it seems to have gone stale on another forum. I'd prefer not to use that forum.
I understand the Vogue's bluetooth might show the most promise for general bluetooth applications (which would satisfy the most users), but becuase I plan to use bluetooth solely through this car, does anyone know if I might be able to go an easier route given the information I've provided?
I'm using radio 1.40.00, could 1.47.01 make a difference?
Can anything be learned through HTC's Kaiser update patch?
Are there any bluetooth alternatives being tested that I haven't found?
Thanks for any help anyone can provide.
OK. I tried what you said and confirm the same results on the '08 Altima. If I switch to handset and back to Bluetooth, the sound is clear (weird). The only problem is, I can't switch until a call is in progress. This is a work around, but not a good one. We need a BT stack that fixes this. Or maybe firmware upgrade from the auto manufacturer.
I know this is going to sounds like a cheap shot, but it sounds to me like something needs to be fixed on Nissan's side. I've tried mine in an Accura without any problem, however both of your stereos are manufactured by Nissan.
A word of advice: I always found that auto makers should stick to what they do- namely, make cars. If Nissan were so great at BT stereos, you'd see nissan headsets.
I never bother with factory Bluetooth anymore- I swapped my stereo right away for a decent Sony Xplod system that supports A2DP (wireless stereo) as well as phone calls. The aftermarket stereo not only sounds great, but I play all my music from my phone without taking it out of my pocket. Last I checked, no stock car stereos supported this. Sony is good at stereo and bluetooth (been around the block a few times).
Complain to Nissan. Or swap your stereo for something decent.
My Sprint 6700 with BigJ Rom works great with the 08 Altima. In the fact the audio quality is better than the Sanyo Katana that I also have paired. I am dispointed that I cannt answer calls from both phones on the car headset without first selecting the phone that has an incoming call. Even my At&T home phone with bluetooth can do that although it does require you to select a cellphone for outgoing calls.
I was able to upload a contact entry from my 6700 to the car Download phonebook. However, I can not get that into the more usable phonebook directory. Anyone succeed in doing that?
shannl said:
My Sprint 6700 with BigJ Rom works great with the 08 Altima.
Click to expand...
Click to collapse
You might be in the wrong forum. The Titan is a 6800, not a 6700.
yes, but this thread is discussing the Altima BT stereo. Truthfully, this whole thread should go in a more general BT forum, since I don't think it pertains to the 6800 exactly.
08 altima bluetooth
Just wanted to say thanks to Park City for posting the name of the web site with the bluetooth extentions (jetwaremobile.com). I have just recently purchased an 08 Altima with the Nav system and bluetooth. I have an Tmobile MDA with a cooked ROM running WM6 and I could not get the entire outlook phone book to download to the car. Once I installed the jetware mobile extentions everything worked just fine. I even got some additional functionality I was not expecting like signal strengh and battery status on the nav srceen. As for voice quality, it's never been an issue for me. So far anyway
As I can see, they are currently testing the Mogul with both of your cars. I don't know what they mean by 'testing', but that's what is going on right now.
http://www.nissanusa.com/bluetooth/...gation+System&mfg=All+Manufacturers&x=51&y=16
http://www.infiniti.com/bluetooth/t...igation+System&mfg=All+Manufacturers&x=42&y=9
arcanecho said:
As I can see, they are currently testing the Mogul with both of your cars.
Click to expand...
Click to collapse
I saw that too, but I don't have a lot of confidence they'll be releasing a bluetooth update any time soon. That's why I was hoping the Titan's bluetooth hardware might be similar enough to the hardware in one of the devices that DO work with our cars (Kaiser, etc., list in my earlier post) that their bluetooth software could be ported "easily" to the Titan. I'm sure the devs here are trying to get the Titan's bluetooth to work as well as possible for everyone's devices, which makes sense. However, with California's new "handsfree driving" law starting July '08, I'm only concerned with getting the Titan to work with my car.
Apparently no one's too sure if that's possible.
1. have any of you verified first hand that the kaiser does in fact work?
2. could someone research and identify the bt hardware in the kaiser, and the titan?
3. has anyone run the kaiser bt fix on their titan and tried it?
i suppose i never thought to look at the kaiser's bt. mine still functions after applying that kaiser patch..
the kaiser patch is a replacement TIInit_4_2_38.bts file
this file did not exist in any titan roms prior to 2.16
2.16 introduced this file (i compared md5 and its not the same data)
2.17, htcs supposed 'fix', does NOT contain this file
all vogue roms i have seen DO contain this file, but again its different data
maybe you guys are on to something
i will throw something together tomorrow probably...drinking time.
dcd, thanks for the help, enjoy those drinks!
1. Not first hand, I'm going off this post. That thread's also why I believe the Kaiser wasn't working with the car before the patch.
2. I've spent a lot of time trying, but have come up empty on any detailed hardware specs.
3. I just ran the Kaiser patch and the bluetooth functions the same as it does without the patch.
I'm using a rom from your 1.6.7 kitchen with nothing else added (rom's working great, btw). I had the same issue with the stock Verizon rom.
Crazy thought, but if the cooked rom I'm using is based on a stock rom that didn't originally include the .bts file (2.17), could it be being ignored?
FZ1 said:
this post
Click to expand...
Click to collapse
good enough for me
Crazy thought, but if the cooked rom I'm using is based on a stock rom that didn't originally include the .bts file (2.17), could it be being ignored?
Click to expand...
Click to collapse
maybe...i dont know how the file functions and ties into the others yet
FZ1 said:
The Titan DOES work with an '07-'08 Infiniti G35 WITHOUT navigation (buy more, get less ).
Click to expand...
Click to collapse
i take it they are completely different head units?
I have a 07 G35 WITH Navi and yes, the quality is choppy when I connect my phone to it. I have been just using my Platronics Discover 640 for the BT these days... It'd be nice if someone can come up with a solution for this...
dcd1182 said:
i take it they are completely different head units?
Click to expand...
Click to collapse
They're pretty different. With nav you get a 10 gig hd it'll rip cd's to, the nav runs off that hd, the gui which controls much of the car is different, voice prompts are different, the available buttons are different (see attached pics), and you lose a cd changer. I do know first hand that w/o nav the bt works great with an XV6800 (got a loaner once). Again, I've been unable to find out what's specifically different hardware wise (even with the full service manual).
riDuh7 said:
I have a 07 G35 WITH Navi and yes, the quality is choppy when I connect my phone to it.
Click to expand...
Click to collapse
Is choppy quality your only problem? Are your symptoms different from ours in my earlier post?
FZ1 said:
They're pretty different. With nav you get a 10 gig hd it'll rip cd's to, the nav runs off that hd, the gui which controls much of the car is different, voice prompts are different, the available buttons are different (see attached pics), and you lose a cd changer. I do know first hand that w/o nav the bt works great with an XV6800 (got a loaner once). Again, I've been unable to find out what's specifically different hardware wise (even with the full service manual).
Is choppy quality your only problem? Are your symptoms different from ours in my earlier post?
Click to expand...
Click to collapse
Once connected, I get a really static noise from my end while in the conversation. Of course, it'a really not usable at all....
I'm going to try the reconnecting method that was mentioned above today. I'll come back and report the outcome. And thanks for the help BTW.
EDIT: BTW, my Wizard (Cingy 8125), Hermes (Cingy 8525), Samsung i760, and few of the Moto handsets are all fine paired to my car. MAYBE, someone can get the BT stack from Hermes to work with the Titan?
FZ1 said:
They're pretty different. With nav you get a 10 gig hd it'll rip cd's to
Click to expand...
Click to collapse
whoa, someone hook me up with a G35 to uh, test
Wizard (Cingy 8125), Hermes (Cingy 8525), Samsung i760, and few of the Moto handsets are all fine paired to my car. MAYBE, someone can get the BT stack from Hermes to work with the Titan?
Click to expand...
Click to collapse
well, peices of it maybe. i would blindly guess that the kaiser is closer to titan than hermes, but we need to exactly identify the bt chip in each. plus its still shady then, ie the kaiser has tnetw1251 for wlan same as the titan and I cannot get their newer wlan driver to work on my device.
what we really need to look at is previous bt stack modifications for other devices. i need a better understanding of tiinit_blah. I've also noticed that the devices that work have a more extensive, or a 2nd audiopara file that sets values for some bt devices. to be completely honest right now i dont know what im looking at and i need to figure out how it all fits together before i know where to start.
Well, I tried reconnect method from both phone and the car, but neither did anything at all. The quality is still crappy as heck. Man... I reallly wish this works.
EDIT: Actually my side of the speaker was complete static, and the other side could not hear what I was saying AT ALL. This efing blows.
Is there anyone here than can build a similar program to that of Jetware but for Windows Mobile 6 Devices both smartphone and PDA.
I have a Garmin Nuvi 660FM and with Jetware 1.31 I can get all functions working bar the SMS Reader (which also has the ability to read messages via the TTS Function).
Basically what I would like is a program built into a cab installer than can enable all the fuctions of the Garmin Nuvi and Tomtom devices that have bluetooth car kits built in that also support SMS.
I would be willing to pay anyone for a program such as this.
me too, pleeeease
(ciao)
Same here. The guy that made the extension for the bluetooth sony ericsson watches might be able to adapt it to work with other devices. I tried bringing it up to him, but it seems he ignored my post...
up! up! uP!
NRGZ28 said:
Same here. The guy that made the extension for the bluetooth sony ericsson watches might be able to adapt it to work with other devices. I tried bringing it up to him, but it seems he ignored my post...
Click to expand...
Click to collapse
The problem is I dont have any of these devices. I have never seen such thing. And most probably I wont even buy such device because I dont like spending money on cars and car accessories. (I like gadgets that fit into my pocket)
These devices use the same protocols as the watch you wrote your software for. I'd like to program my own little app to interface with all the GPS devices that use those features as well as all the bluetooth car stereos out there. Would you be willing to share some tips, or maybe even source code from your software to help me out with this ?
The BT watch uses a lot of Sony Ericsson specific commands.
You have to find commands that sends the GPS unit - so you may use Windows Mobile with configurated virtual COM and some Terminal software to read the commands.
I believe the GPS units (as well as many car stereos, including mine) actually use the Handsfree profile to send these commands back and forth. The jetware extension has a logging mode where you can see a huge log of all these commands that go on between the phone and unit (whatever it may be). Would it be possible to adapt your application to talk over the handsfree profile ? I think the way jetware did it, is they put a dll between the audiogateway on the phone and device, to intercept all the communication.
The handsfree profile shouldn't be much problem I hope. Try to make some commands log and we will see...
Well guys I dont know much about programming but if you need help or can guide me to getting info I will no probs.
Also I will make a donation to help with the costs and as a thank you for any help.
It's been a while since I've programmed anything, but I'm thinking about writing an application similar to moneytoo's in .NET that will take over where jetware's extension stopped.
Any joy guys ?
I still have money up for grabs for whoever can develop this
I still have money too.
Up up! More money from me also!
The problem with this is the way that Windows Mobile (and the like) handle it's OBEX push abilities..
I have.. searched... called... and looked at so many webpages my eyes started to bleed.
OFFICIAL Garmin 660 (and other) bluetooth supported profile information..
https://www.bluetooth.org/qualweb/ProductDetails.cfm?ProductID=3324
Interesting to note. 90% of the phones out there don't work with the SMS funtion. We can get everything else to work (using the various patches and hacks availible on this web site) But SMS/TEXT alluded me.
Like I said, I narrowed it down to the fact that WM devices handle OPEX/Sync a little differently.. We don't support the classic "Server/Client" mode that the Sony phones do. It's these two that confound me..
- OPP-Server
- Sync-Client
Both are subsets of the Generic Object Exchange Profile (GOEP),.
I found patches, programs and the like that allow these two functions in a fashion.. But I also think the stupid Garmin Software looks at the POD file (informs what functions are avail) for specific phone types that are supported.. Or it could be that our phones just don't report the exact information that the Garmin is looking for, so it just disables the whole thing.
Either way. If someone wants to take a crack at this who has a more experence then me.. PLEASE DO. There is about 40,000 people with this stupid problem and they've all gone nuts..
PS Installing the Widcomm stack does not resolve this problem either.. I spent a week trying too get that @#$%#$%@# thing to work correctly on my wizard.
Well I am prepared to donate USD $100 towards costs to anyone who can develop a working solution, I think other people here also would donate towards a working product.
Thanks for the info and work so far
NRGZ28 said:
I believe the GPS units (as well as many car stereos, including mine) actually use the Handsfree profile to send these commands back and forth. The jetware extension has a logging mode where you can see a huge log of all these commands that go on between the phone and unit (whatever it may be). Would it be possible to adapt your application to talk over the handsfree profile ? I think the way jetware did it, is they put a dll between the audiogateway on the phone and device, to intercept all the communication.
Click to expand...
Click to collapse
If i could get a copy of that log it would help trememndously.
I'll send it in a minute.
Guys, any update on this?
Hello.
Before you tell me... I already searched the forum and I can see many posts about the problems with BlueTooth in the Hero based ROM's, but none of these posts I read (I could have missed some, of course) say what the problems are exactly, so I don't know if it can be a problem for me or not.
The only things that I need from BT are connection to the Parrot CK3000 handsfree on my car, and to send/receive files over BT. Ocassionally I will use the Magic as a 3G modem, but I can do it through USB if not working through BT.
Are these BT features affected by these BT problems on Hero based ROM's?
Thanks in advance.
Not sure if this applies to all hero roms but in the 'jacxheroskiv' rom the problem is a missing shared object (just a missing file in the filesystem)
http://forum.xda-developers.com/showpost.php?p=4479554&postcount=96
Hi There
At the moment Bluetooth is problematic on all hero roms for the sapphire or otherwise. Audio head sets (wireless headphones) seem to work ok but everything else doesn't. So unfortunately your car kit won't work. (I have the same one, it pairs but the audio is garbled) File sharing on the other hand is a problem for all the androids so far (There is an app on the market that provides the functionality but it's not as elegant as it could be) so don't expect that to work on hero roms. I haven't tried Bluetooth tethering because WiFi tether works so well. Perhaps someone else could comment.
Now for the difficult part...
So far as I can tell a willing developer, correct me if I'm wrong, could make the Bluetooth work if the source code for the hero was made available (should be available in a few months if the recent release of the sapphires source code is anything to go by) There seem to be quite a number of people who need this functionality so I'm sure one of the rom cookers will get to it but unfortunately there is no way to know exactly when. For this reason I've decided to stick to the ion roms for now. In any event, Touchflo/Sense UI will be made officially available for the magics in due course...for a price of course
On another note any support financial or otherwise is greatly appreciated by the developers so if you want to encourage a particular functionality a few bucks and a friendly message will go a long way. Please remember though that the developers do this kind of thing for the love of it and provide no explicit support for their roms. Any and all risk is taken upon yourself but in most cases caveats will have been picked up by someone before hand.
Sorry if I've mentioned some things you already knew but I thought to add some info applicable to other newcomers.
Enjoy hacking!!
Thanks both.
I guess I'll have to use a non-Hero ROM then. As for the BT file transfer, I've seen at least one Cupcake ROM with it enabled and available as an option in the BT menu. I don't know what ROM it was though, I think I saw it in a Youtube video.
P.S.: I noticed that this thread was moved to "Sapphire general", sorry for put it in "development", I did it for it was related to Hero ROM's. Thanks mods for move it.
A2DP works for my Sony Ericsson HBH-DS205 - music streams flawlessly.
However, the call feature does not work - is this another common bluetooth problem with the HEROs?
I know that at the moment this isn't possible, but does anyone know if there is work being done on the Android bluetooth stack to enable a tablet to be used as a bluetooth hands-free device? A bit of searching shows that it is a regularly requested feature but I can't seem to find any info on any developers who are definitively working on this (except for one little questionable nugget that stated that the CM developers were playing with Bluetooth. Hardly enough to go on.).
I want to incorporate a Nexus 7 into my 370Z as a carpc but the lack of being able to integrate phone features is holding me back. Using data apps like grooveip are a no go for me as data connections around here aren't reliable enough for consistent daily use. Thanks in advance for any info.
I'm not to sure of what your asking, but if you wanna make calls from your tablet using BT this app allows you to do that as well as send SMS and MMS from it https://play.google.com/store/apps/details?id=com.apdroid.tabtalk hope that helps and is what you mean
Sent from my Nexus 7 using Tapatalk 2
I appreciate the suggestion but I don't think this will work. What I would like to do is mount my tablet in my car and use it as a front end for my phone to make/take calls the way an OEM bluetooth car system would normally work. My understanding is that your tablet must be paired as a hands free device, which android tablets currently don't do. I looked at Tablet Talk but when using that app from what I can gather when you accept a call on the tablet it actually activates the call on your handset. Ultimately I want to use the tablet as a hands free solution as I drive stick and holding my phone to my ear while driving is a no-no.
In the past I've used bt headsets but I lose them constantly and frankly I'm tired of replacing them. Oh well.
Well, good luck in your search! And you hit tablet talk spot on BTW lol. Oh and if you do find a solution, plz post it! This sounds like something I would love to use.
Sent from my Nexus 7 using Tapatalk 2
SpungeWorthy said:
Well, good luck in your search! And you hit tablet talk spot on BTW lol. Oh and if you do find a solution, plz post it! This sounds like something I would love to use.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Thanks. I'll thinking I'll probably go the route of a more traditional carpc for now, but if and when this becomes a feature you can take advantage of with android tablets I'll have to reevaluate the situation.
Nillaz said:
I know that at the moment this isn't possible, but does anyone know if there is work being done on the Android bluetooth stack to enable a tablet to be used as a bluetooth hands-free device?
Click to expand...
Click to collapse
This would be a great extension or compliment to the various apps that let you send/receive SMSs from your tablet via your phone. If I could at least receive/answer calls too, I could leave the phone elsewhere at home.
Just to let you know I've contacted parrot and garmin with regards to something like this.
I want a solution where I can make my nexus 7 a full media center with DAB radio and a good sat nav without needing a cellular link and hands free for my phone which includes the voice commands available through the tablet.
So hopefully they will get back to me and I'll post up here what they say.
Something I haven't solved yet either is getting all the antennae feeds into the nexus, I was thinking of getting a sharks fin antennae and wiring them into a raspberry pi to then blue toothing them into the nexus, I could also then attach a HDD to the pi to use it as a server to.
I want to do it this way so I can take the 7 otu and with me if I wish, rather than having it hard wired in. also if would allow for device upgrade.
Theres a nice thread on install and with references to the tasker app to get the tablet to work with the ignition and other functionality like that;
http://forum.xda-developers.com/showthread.php?t=1819175
b
BT app
There is an app under development for this I think. play.google.com/store/apps/details?id=com.funkyandroid.phonelink
I'm thinking of dropping a Nexus 7 in my car but the lack of hands free bluetooth is kind of a deal breaker.
Did anybody ever get this working? I have my Nexus installed in the car, and would love to be able to use it as a speakerphone. I don't need to actually be able to make the calls via the tablet, just need to be able to use it as a basic bluetooth speakerphone / headset type of thing.
It sounds like it should be something fairly simple, but I cannot seem to find much.
I have been wanting this for a long time, I'd love to be able to take my older Android phone and re-purpose it as a car GPS/Internet Radio/Handfree, etc.
I know the Samsung Galaxy player has this functionality, I wonder if any of their devs could help out.
if this work in linux so i think can work on android
Hi to all,
i been looking for this "bluetooth role" for long time. I have read a lot of forum and the entire XDA posts about this..
it seems that this is the definitive question like "what is the answer to life the universe and everything" simple 42
and it seems that is the paradise for all want to make a carputer/droid/tablet/**** car radio replacement... so... i'm one of you
this post is for some devs (i'm a dev too) i'm asking for help ....
the problem is: which android version do you want to use?
why this question? simple: from the android 4.2 google has decided to trash the bluetooth bluez stack and reimplement the wheel with bluedroid...
i read the documentation about bluedroid at this site:
https://source.android.com/devices/bluetooth.html
and there was written that there are some profiles actualy implemented but not the Bluetooth Hands-Free Profile server.
Ok it's not a problem, taking a look to the template of other profile i can implement it.
now the question is HOW DOES IT WORKS?
so i searched and bum this is how:
version 1.5
version 1.6
ok and now? and now i tried to find some similar implementations and...
after another night of search i found this....
HFP For Linux
where there is the downloadable source code.
now I think we have all the necessary to make this possible...
BUT there are some problem that i haven't resolved yet for a lack of knowledge of course.
it seems that the hfp override any other profiles on that example, it's not bad, in a system that i want to use i need only a HFP profile and AD2P togheter all the rest is useless
i think that this at the end is a fork of the standard android project and how I/we can put it into a rom or a patch and who want to add to a rom/kernel? how it can be done? is a patch better ? a new kernel like franco's or better to submit to google?
I hope to have intrigued someone with this post and I hope that somebody can link me to some documentation to understand how to put all the information I have together.
ps. i have tried to reply into this thread:
[Q] Android phone as bluetooth headset?
but of course i have to few posts to make my suggestion there
I may be out of line here but try reading about the gmate+ device.
I got one paired with my Nexus 7 32gb right now and currently using it as a phone. I believe there are other similar gadgets out there, as I've done some researches before I actually got mine to work. I have yet to try it with a bluetooth headset paired because I lost mine just on the day when I was about to try it out.
Anyway, one problem here is, the app for the device is currently not updated so there are a lot of things that need tweaking and one major issue for me is the ringtone. As I have posted here before, sine N7 does not have native ringtone, there's no alert tone for incoming calls. As for text messages, the notification alert tone works. I know there's also GPRS for it but haven't tried it out yet.
Try these options...
As far as an option for a Nexus 7 you may want to try a sip dialer like 3cx or linphone or zoiper and establish a free sip account at iptel.org or something. As long as you have wifi or a 3g connection which some tablet have you should be able to make and receive calls, or try ""Blue Fi" from the play store. it may work.
naiku said:
Did anybody ever get this working? I have my Nexus installed in the car, and would love to be able to use it as a speakerphone. I don't need to actually be able to make the calls via the tablet, just need to be able to use it as a basic bluetooth speakerphone / headset type of thing.
It sounds like it should be something fairly simple, but I cannot seem to find much.
Click to expand...
Click to collapse
golfnz34me said:
I have been wanting this for a long time, I'd love to be able to take my older Android phone and re-purpose it as a car GPS/Internet Radio/Handfree, etc.
I know the Samsung Galaxy player has this functionality, I wonder if any of their devs could help out.
Click to expand...
Click to collapse
I just got a new Nexus 7 for the same purpose of replacing my vehicles head unit with a tablet.
I am digging into the BT stack since I believe that I should be able to implement (or port) the profile on top of Android 4.3 assuming that the SCO data is available through the raw BT connection. There is an open source HFP implementation on sourceforge for Linux that migh be close enough to do the trick and save a bunch of coding time. It's going to take a while for me to get the time to dive too deeply into this one, but if I succeed or come to the conclusion it can't be done, I will let folks know.
Hello guys.
I am going to buy Nexus 7 for my car for the same purposes, - navigating, internet.
But mainly is for the Hands Free function.
Unfortunately, people saying nexus can't use it. But it's lol...I don't believe nexus7 doesn't support hands free.
Gentelman, tell me any way to make nexus 7 works hands free.
Thank you in advance.
P.S. if you ask wham am I mean when saying "hands free", so there is an example http://www.youtube.com/watch?v=ZEFjDKtlao8
Use some Motorola MotoActiv Bt code?
I have a Motorola MotoActiv running watch... Features gps tracking for running and biking, MP3 player and Bluetooth... The Bluetooth is mainly used for wireless headphones, but if you have a Motorola Phone, the watch can display text msgs from the phone and you can use the headphones/mic through the watch to take calls. (the idea being that you can leave the phone in a pocket or backpack while you're bike riding, I guess, and still take calls.)
The device runs Android (I'm sure someone's rooted it on here). Maybe that code can be dissected and repurposed for what were all looking for??
J
more on Motorola Watch
SmartNexus said:
I have a Motorola MotoActiv running watch... Features gps tracking for running and biking, MP3 player and Bluetooth... The Bluetooth is mainly used for wireless headphones, but if you have a Motorola Phone, the watch can display text msgs from the phone and you can use the headphones/mic through the watch to take calls. (the idea being that you can leave the phone in a pocket or backpack while you're bike riding, I guess, and still take calls.)
The device runs Android (I'm sure someone's rooted it on here). Maybe that code can be dissected and repurposed for what were all looking for??
J
Click to expand...
Click to collapse
Just an update on something I said in my previous post... I was looking at my MotoActiv watch today and it says you have to have an "Android phone" not a Motorola phone as I said in my previous post. So I'm wondering if the phone audio over Bt can be reverse engineered from the Motoactive watch for other android devices.
I actually decided to root my watch today just for the fun of it... it would really make the perfect "Car Head Unit" as it has Android OS, MP3 capabilities, FM Tuner, Bluetooth and Phone audio over Bluetooth built in... if only the screen was larger than 1.5".
Looks like the Nexus 4 and Nexus 7 2013 are getting some love in this area with a new custom stack:
http://www.bluez.org/bluez-for-android-status-update/
Looks like you need some compiling skills, but I think this is what you are looking for.
It must be work... Or not?
Hello guys!
I'm thinking on a same project for a while. It doesn't matter if not work for me, but would be great if yes.
I found something 2 days ago:
Parrot Asteroid Smart
This is an android base head unit/navigation, and the bluetooth handsfree is working on it. How it's possible? Any chance to port it into the Nexus 7?
solution
So i had an idea today and decided to call my carrier (Cricket). They told me it is possible to purchase an extra sim card and they will program the imei# to match my phone. This will enable me to make and receive calls on my tablet as well as my phone using the same number. Also i will have full access to my data.....problem solved with only 15 dollars. I hope this helps somebody.
Having an issue pairing my Motoactv to the new bluetooth headset I just bought, the LG Tone+ (HBS-730). Motoactv won't even see it. Headset connects just fine to the phone, and Motoactv connects to phone and old headset (Motorola S10-HD) without a hitch. Tried removing all existing bluetooth connections on all devices. On Motorola's advice, factory reset Motoactv. Nothing seems to be helping.
Does anyone know if this is something that a dev could fix? If it's a simple "no, there's no way modding will fix that", please let me know, so I can return this headset. I really appreciate any help. I bought this thing because it can connect to 2 devices, where the S10 could not. Doesn't do much good if it won't pair, does it?
I couldn't find a better place to put this, since Motoactv doesn't have its own section. Hope that was OK.
davidam091 said:
Having an issue pairing my Motoactv to the new bluetooth headset I just bought, the LG Tone+ (HBS-730). Motoactv won't even see it. Headset connects just fine to the phone, and Motoactv connects to phone and old headset (Motorola S10-HD) without a hitch. Tried removing all existing bluetooth connections on all devices. On Motorola's advice, factory reset Motoactv. Nothing seems to be helping.
Does anyone know if this is something that a dev could fix? If it's a simple "no, there's no way modding will fix that", please let me know, so I can return this headset. I really appreciate any help. I bought this thing because it can connect to 2 devices, where the S10 could not. Doesn't do much good if it won't pair, does it?
I couldn't find a better place to put this, since Motoactv doesn't have its own section. Hope that was OK.
Click to expand...
Click to collapse
If the MotoACTV does not see the headset while the headset is in pairing mode then it won't work. It will not pair with something it cannot see. Not sure why it wouldn't see it though. The MotoACTV uses bluetooth 4.0 so the LG's bluetooth 2.0 should be seen with ease. My suggestion would be to remove all bluetooth devices from MotoACTV. Reboot the MotoACTV and try again. Also make sure that ALL other devices have their bluetooth turned as so they don't see the LG and try to pair with it. If that doesn't work then odds are it won't work at all.
I think this new version of the headset is Bluetooth 3.0. It's the Tone+ 730, not the Tone 700 original (which, apparently, has no issues pairing with the Motoactv).
davidam091 said:
I think this new version of the headset is Bluetooth 3.0. It's the Tone+ 730, not the Tone 700 original (which, apparently, has no issues pairing with the Motoactv).
Click to expand...
Click to collapse
MotoACTV is still 4.0 so it should be compatible with 3.0, good luck
pairing
Ill let you know i own one of these headsets and should be recieving my motoactv in the mail soon.
Any ideas on the issue guys? I have a Motorola h500 and an LG-HBM 235 and neither will pair with the motoactv. It drives me absolutely nuts that the Motorola headset doesn't even work with the motorola motoactv. I mean really, WTF man? I don't want a big stereo headset. SMH. If i could finally get bluetooth audio, this thing would be great. In fact, they need to make a new model with a speaker and mic then it would be the greatest!
Figured it out. Your bluetooth earpiece/headset must be A2DP compatible.
heat22 said:
Figured it out. Your bluetooth earpiece/headset must be A2DP compatible.
Click to expand...
Click to collapse
I can't post links yet, but on the LG site, it says the 730 has A2DP...
Man, this is driving me nuts. I love these headphones, and they seem awesome for running. But I'll never know at this rate...
davidam091 said:
I can't post links yet, but on the LG site, it says the 730 has A2DP...
Man, this is driving me nuts. I love these headphones, and they seem awesome for running. But I'll never know at this rate...
Click to expand...
Click to collapse
I have these headphones as well but have always had them paired to the phone. I just tried to pair them with my actv just to see if my results were any different but unfortunately, I have the same issue.
It may be possible to pair them through a third party app but I haven't tried.
Artimis said:
I have these headphones as well but have always had them paired to the phone. I just tried to pair them with my actv just to see if my results were any different but unfortunately, I have the same issue.
It may be possible to pair them through a third party app but I haven't tried.
Click to expand...
Click to collapse
Any suggestions for 3rd party apps that would do this? I'm willing to try.
Also, does anyone think that modding the ACTV with some of the work the guys here on XDA have done will have any effect? I'm reading threads dealing with similar problems with other devices (e.g. car kits) and some are saying its a bluetooth driver issue. Maybe a custom UI will include different bluetooth drivers?
I know it's annoying to hear people ask for free work, but if any of you ACTV programmers/modders think you can tackle this issue, we'd all really appreciate it. It's incredibly frustrating when you buy 2 things that should work together just fine, but for some unknown reason, just don't.
Thanks!
davidam091 said:
Any suggestions for 3rd party apps that would do this? I'm willing to try.
Also, does anyone think that modding the ACTV with some of the work the guys here on XDA have done will have any effect? I'm reading threads dealing with similar problems with other devices (e.g. car kits) and some are saying its a bluetooth driver issue. Maybe a custom UI will include different bluetooth drivers?
I know it's annoying to hear people ask for free work, but if any of you ACTV programmers/modders think you can tackle this issue, we'd all really appreciate it. It's incredibly frustrating when you buy 2 things that should work together just fine, but for some unknown reason, just don't.
Thanks!
Click to expand...
Click to collapse
Perhaps something like this could work? https://play.google.com/store/apps/details?id=com.IG.BluetoothManager
Alternatively, if your device is rooted there are .conf files under /system/etc/bluetooth/ that could potentially be modified to get this working. For example, audio.conf could be modified to remove "Disable=Headset" as well as enable HFP. These changes could possibly resolve the issue but I haven't tried tinkering with them.
Artimis said:
Perhaps something like this could work? https://play.google.com/store/apps/details?id=com.IG.BluetoothManager
Alternatively, if your device is rooted there are .conf files under /system/etc/bluetooth/ that could potentially be modified to get this working. For example, audio.conf could be modified to remove "Disable=Headset" as well as enable HFP. These changes could possibly resolve the issue but I haven't tried tinkering with them.
Click to expand...
Click to collapse
Ok, so I decided to tinker a little and the app I mentioned did not work.....neither did some of the modifications I made to to the audio.conf file.
However, I did download this app:
https://play.google.com/store/apps/details?id=es.qrr.android.btoolkit
In the app settings, I enabled experimental mode and was able to find the HBS-730 headset and pair with it. Unfortunately, I wasn't able to go any further than that. Even though it is paired, music wasn't routing to it (granted I didn't use the stock music player -- that may have worked).
I believe the actv is treating the HBS-730 like a phone, tablet, or comp rather than just a headset which is why it is not interacting directly with it. There may be another app with root privileges (like the original app I suggested) that could possibly route the audio correctly but I haven't had the time to tinker with it and don't typically need audio output from my actv anyway.
Hope this somewhat helps.
Artimis said:
Ok, so I decided to tinker a little and the app I mentioned did not work.....neither did some of the modifications I made to to the audio.conf file.
However, I did download this app:
https://play.google.com/store/apps/details?id=es.qrr.android.btoolkit
In the app settings, I enabled experimental mode and was able to find the HBS-730 headset and pair with it. Unfortunately, I wasn't able to go any further than that. Even though it is paired, music wasn't routing to it (granted I didn't use the stock music player -- that may have worked).
I believe the actv is treating the HBS-730 like a phone, tablet, or comp rather than just a headset which is why it is not interacting directly with it. There may be another app with root privileges (like the original app I suggested) that could possibly route the audio correctly but I haven't had the time to tinker with it and don't typically need audio output from my actv anyway.
Hope this somewhat helps.
Click to expand...
Click to collapse
I had similiar problems pairing my motoactv with a pair of UE 9000's. It could see the device, but would not pair through the stock menus. Tried downloading some third party bluetooth managers and was unable to get any audio. I believe it has something to do with Apt-X codec for bluetooth not being implemented in 2.3 gingberbread on the motoactv
Artimis said:
However, I did download this app:
Click to expand...
Click to collapse
Here's where I lose all credibility (and help)...
You mean download the app to my ACTV, right? So... How do I do that?
How do I download 3rd party apps to the ACTV? I haven't modded mine at all. Do I need to do anything to it?
I realize I have just exposed myself as a NOOB. Alas, I had no choice. Please continue to speak to me.
davidam091 said:
Here's where I lose all credibility (and help)...
You mean download the app to my ACTV, right? So... How do I do that?
How do I download 3rd party apps to the ACTV? I haven't modded mine at all. Do I need to do anything to it?
I realize I have just exposed myself as a NOOB. Alas, I had no choice. Please continue to speak to me.
Click to expand...
Click to collapse
No worries .
Yes, you'll need to download the app to the ACTV. It will require rooting of the device and installing a custom ROM is the best way to get everything necessary for the market to work so that you can install these apps.
There is a step-by-step tutorial in the MOTOActv rooting thread in this forum.
Any further updates?
Just curious to see how this solution worked out. I am having the same problem and am definitely a NOOB. Attempting to download an app to my Motoactv seem a bit daunting to me...