So i am here with a new idea. A rescue.zip which can be used to rescue any android device which have a recovery like the famous cwm.
So here is it..
Some times we people screw up our android os like hell, and to reboot the device we usualy do a recovery flash of a new os, flash back our nandroid backup ( both on worst conditions) or even do permission fix, clean cache or dalvic cache( those in 'not that worse' conditions) . So thats are all the options we got. Rit?
Although flashing recovery backups, new roms can fix all, it will also eatup our apps, current setups, contacts, msgs, etc( in case we dont have backups) and will probably screw us. All we can do is say " WTF..WTF..WTF.."
SO here is my idea,
Find out the causes of what causes a reboot, non-boot, hang,fc etc.
And keep a zip that can be flashed through recovery, that has a solution for our problem. They may be including..
1) fix permission of system, data, and user data.
2) zipalign the apps
3) fix the default clock speed of processor
4) defragment memory
5) flash a new copy of su and busy box
6)wipe data or system or ext or cache or dalvic cache
7) flash a new copy of framework.res, system-ui.apk, settings.apk with default permissions( those files are kept in separate "custom" folder on the zip, so that end user can put their own files to that "custom" folder for flashing., the reason behind it is known to all, yap. Not all devices have them in common, every device have its own files)
These are all i got for now, pls post ur ideas and knowledge for any possible cure about any problem u faced/ cured. So that we can make it an ultimate rescue.zip that have a cure for 99% problems android os have. The rest 1% will go with a clean flash.( well we cant avoid that if we did something that bad).
So my plan is to use aroma installer( now on hard learning to find how it works). Throw in some scripts, files etc. Into the zip.
And since its not a device specific .zip file, i want to know how and why any problems are caused in any device( there are many common problems, but that is not what i ask for. I ask for device/os specific problems, and not for a problem that we can cure after booting, but for a problem that can make the device un-bootable) . So u people may help me to find those problems and cures for it. For my knowledge i have experience with wildfire and hd2.
Well i will keep this thread for a week or two, so that u can post ur knowledge, and info. after that i will release the file for u.
To the admin. Of the forum, pls keep this thread as announcement so that all can take a look.
HYPERDROID EXTREEM EDITION-THE NEW BENCHMARK ROM FOR HD2.
showlyshah said:
So i am here with a new idea. A rescue.zip which can be used to rescue any android device which have a recovery like the famous cwm.
Click to expand...
Click to collapse
good idea however there are SOOOO many variations of the files that would be needed, that basicaly it would be easier to consider what ever ROM you are using as the OMG_RECOVER.zip
Just my 2 cents.
Pvy
pvyParts said:
good idea however there are SOOOO many variations of the files that would be needed, that basicaly it would be easier to consider what ever ROM you are using as the OMG_RECOVER.zip
Just my 2 cents.
Pvy
Click to expand...
Click to collapse
mmmmm variables.... tasty
Related
Hi Folks.
Just been issued heros at work and wish to update the radio rom...How is this accomplished??
regards
Lohtse
Firstly it needs to have a recovery image installed I recommend Amon-Ra v 1.6.2.
Secondly you need to find the radio rom you wish to flash and put it onto the root of you phones sd card.
Thirdly enter the recovery image you have installed by holding power and home button from the phone being off.
Then select the radio.zip to flash.
Everything I have said here can easily be found how to do via searching this forum or its wiki.
also www.theunlockr.com will help with installing the recovery image.
lohtse said:
Hi Folks.
Just been issued heros at work and wish to update the radio rom...How is this accomplished??
regards
Lohtse
Click to expand...
Click to collapse
First you will need to install the custom recovery console if you haven't done so already.
Then download your updated radio, put it on your SD, load into the recovery, then apply update. DONE!
If that is too brief,... let me know,...
EDIT... Ooops,... too late.
way to complicated...
Too much to do and can screw up..... At least with winmo and symbian was a few clicks...
hmmmmm think will ditch android.....
really? its not complicated at all when you know what your doing. In fact I can say its a damn sight easier (and safer) than modifying blackberry roms and from what I hear also Windows Mobile.
Lennyuk said:
really? its not complicated at all when you know what your doing. In fact I can say its a damn sight easier (and safer) than modifying blackberry roms and from what I hear also Windows Mobile.
Click to expand...
Click to collapse
I came from wimo to android, and as it is said, it's quite hard to catch the thing at the beginning, but after everything seems easier than in wimo !! and more reliable... you have almost no chance to brick your hero after you installed the recovery boot.
radio : boot in recovery then select the good option.
rom : nandroid backup / install whatever rom you want / if you don't like it go for nandroid restore ( all you need is two Sd card.. the good one and the one for the "tests" ).... etc....
But at the beginning i was totally out but with a little time.. reading some posts (here and on the web) ... one day everything was more clear !
Ciao
Fred
lohtse said:
way to complicated...
Too much to do and can screw up..... At least with winmo and symbian was a few clicks...
hmmmmm think will ditch android.....
Click to expand...
Click to collapse
Its not hard at all. You can have the recovery installed and the radio updated in 5 minutes.
For step by step instructions follow the "Installing a recovery image" section in BTDAG's guide linked in my signature.
Then further down the same post, in the second yellow box there are instructions on "Updating your Radio".
Guys, the OP said he was issued the Hero at work, then two hours later said he was going to ditch Android... so what then, he's quitting his job? Troll alert. Don't feed the troll.
As to troll comment(yes offence has been caused)....hmmmmm.... Am going back to the trusty Kaiser... WE DON'T HAVE TO USE THE HERO.... We live in free(ish) world.. And the Phones are issued as an update to our old duty phones... Also I'm not the only one who uses them that feels the same.
Now to updating being easy. Gulp I must be eeer dum!!! Du hu Du HU must be the TROLL in me!
I have tried to install recovery image thing and well just cant get it to work... And now I find I have to root the hero too so things will install to sd card!!!! WTF this should all be standard like winmo and symbian etc...
I have been using smart phones since the Ericsson r380 and so far Android has failed to impress to the degree I am beginning to hate it....
Am far to used to having simply andfull access to everything..
Android is a HUGE learning curve that I suspect I may not have the patience for..
regards The TROLL sorry I mean Lohtse
Now I have finally managed to get recovery image on and updated the radio...Being called a troll did it !!!!!!.....LOL
My final questions are this how do I root so I can install to sd card(just point me in the right direction) And do I have to unlock Phone to any network to have custom roms on..
regards
TROLL
lohtse said:
Now I have finally managed to get recovery image on and updated the radio...Being called a troll did it !!!!!!.....LOL
My final questions are this how do I root so I can install to sd card(just point me in the right direction) And do I have to unlock Phone to any network to have custom roms on..
regards
TROLL
Click to expand...
Click to collapse
Wahey!!!! Good job man.
Ok,... So now you have the recovery image all you need to do is pick a custom ROM. Personally, I highly recommend MCR3.2 (link in signature at botom). It is an Android 1.5 ROM but is stable and fast, what more could you want for a work phone.This ROM is rooted and has apps2SD enabled. Once you have installed the ROM you will need to remember to create an ext2 partition on the SD card (easily done through the recovery). Then you are set to go!!!!
lohtse said:
Now I have finally managed to get recovery image on and updated the radio...Being called a troll did it !!!!!!.....LOL TROLL
Click to expand...
Click to collapse
You're welcome And what ddotpatel said. MCR is fast & clean. By installing a custom recovery you've already done the only tricky bit.
Yep installed 3.2 from modocca. seems nice but how do you know if the apps are installing to sdcard???? I'm not sure they are lol..
lohtse said:
Yep installed 3.2 from modocca. seems nice but how do you know if the apps are installing to sdcard???? I'm not sure they are lol..
Click to expand...
Click to collapse
You need to create an ext2 partition on your SD card through the recovery again. I cant remember the exact wording but something like "create ext2 + fat" or something along those lines.
As far as I know, once that has been done all apps will install to SD.
Someone with more knowhow than me correct me if I am wrong?... CAULI?,... LENNY?
Can someone who knows please answer this question:
Are you 100% sure that flashing the Radio ROM does not affect the phone RF Calibration ?
Thanks!
ddotpatel said:
You need to create an ext2 partition on your SD card through the recovery again. I cant remember the exact wording but something like "create ext2 + fat" or something along those lines.
As far as I know, once that has been done all apps will install to SD.
Click to expand...
Click to collapse
Yup, certainly as far as MCR is concerned. On the first reboot it will move all files from /data/app to /system/sd/app (& similarly for app-private) Nb /sysytem/sd is the mount point for the ext2 partition. All it does is move the files over & then replaces the /data/app (& app-private) directory with a symlink to the new location. That way future installs, updates etc all automatically go to the new location.
You can always check yourself with a terminal emulator & the command ls -l, or using a file manager like Root Explorer, if you're curious. Some people think it's not working because they see available space in internal flash drop as apps are installed, but that's because app data & the dalvik cache remain on internal flash, principally aiui for reasons of access speed. The saving you make just from shifting the apks to sd is more than enough for most people it seems.
cauli said:
Yup, certainly as far as MCR is concerned. On the first reboot it will move all files from /data/app to /system/sd/app (& similarly for app-private) Nb /sysytem/sd is the mount point for the ext2 partition.
All it does is move the files over & then replaces the /data/app (& app-private) directory with a symlink to the new location. That way future installs, updates etc all automatically go to the new location.
You can always check yourself with a terminal emulator & the command ls -l, or using a file manager like Root Explorer.
Some people think it's not working because they see available space in internal flash drop as apps are installed, but that's because app data & the dalvik cache remain on internal flash, principally aiui for reasons of access speed.
Click to expand...
Click to collapse
hmmmm I certainly noticed a drop in available memory on the phone to the degree of only having 54 megs free...
SebHTCHero said:
Are you 100% sure that flashing the Radio ROM does not affect the phone RF Calibration ?
Click to expand...
Click to collapse
what is rf calibration?
What is radio rom used for by phone?
kendong2 said:
what is rf calibration?
Click to expand...
Click to collapse
A set of tables usually stored in NVRAM that takes into account the slight differences in the components used to build your phone. Every single phone is calibrated during manufacturing.
If the calibration is erased, it will look like it works but you can have all sort of problems from poor battery life to random drop from the network or poor sensibility (not to mention the higher than expected radio levels you could be emitting right next to your brain )
I understand there's a tips and tricks thread that explains things in more detail but how does somebody go from just getting the phone to installing, or even understanding, things like obsidian, onyx, morphing and learning what the basic functions of such programs are.
The question I currently have is concerning flashing custom roms. In the tips & tricks thread, it talks of froyo builds (ex: bionix & frankin-twiz). What is it exactly? From what I understand, it sounds like a mini os that you install onto your device which helps in applying different functions to it, which makes custom roms possible.
I'm currently trying to get http://forum.xda-developers.com/showthread.php?t=845530 to work on my vibrant. Can anybody help a newbie out?
VibrantUser1 said:
I understand there's a tips and tricks thread that explains things in more detail but how does somebody go from just getting the phone to installing, or even understanding, things like obsidian, onyx, morphing and learning what the basic functions of such programs are.
The question I currently have is concerning flashing custom roms. In the tips & tricks thread, it talks of froyo builds (ex: bionix & frankin-twiz). What is it exactly? From what I understand, it sounds like a mini os that you install onto your device which helps in applying different functions to it, which makes custom roms possible.
I'm currently trying to get http://forum.xda-developers.com/showthread.php?t=845530 to work on my vibrant. Can anybody help a newbie out?
Click to expand...
Click to collapse
the link you posted is just to a theme.
to get the theme to work you'll need to be running obsidian first.
so lets see, the easiest way to explain the different versions 2.2, 2.1 1.6, 1.5 and so forth is this...
its pretty much like going from windows 95 to 98 to 2000 to xp to vista and so forth.
our vibrants come with android 2.1, 2.2 is the next version of the os to come out (basicaly like moving from vista to windows 7)
the different roms like obsidian and Macnut and such are just names that the developers gave their roms.
what happens is a developer starts out with a version of android (in the case of Macnut and Obsidian this is 2.2)
and then they add their own modified tweaks and such to it.
and so in the end they get Obsidian which is a modified 2.2
or Macnut which is also a modified 2.2
they differ a bit though as Obsidian is based almost totaly on a leaked version of 2.2 for the US vibrant, where Macnut is based alot on the 19000 version of 2.2 for the european phones.
so when choosing a rom just choose the base you want first: 2.1 or 2.2
then look through the tweaks on a few roms and read some of the thread for that rom untill you get a feel for what makes it unique
you can also just experiment by flashing a rom for a day or so and then switching to a new one untill you find one you like.
Morphing is a way to apply a theme to a rom, this does not generaly change functionality at all, it only changes apearance.
alot of themes are either morphs (you install them using metamorph, which is an app from the market)
or they also come in zip format (which are installed by flashing from recovery)
for the theme you posted you will need to flash obsidian, and then flash the zip for the theme afterwards.
have you rooted your device yet?
thats the place to start, if you need help just pm me or repost here and I'll do what I can.
also, there is a "newbie's guide":
http://forum.xda-developers.com/showthread.php?t=732458
nearblack said:
also, there is a "newbie's guide":
http://forum.xda-developers.com/showthread.php?t=732458
Click to expand...
Click to collapse
lol true true
Before you even want to start with anything, you have to learn what 'rooting' your phone means.
Without root, you won't be able to do any of the above. You might be able to download the programs necessary, but you won't be able to use them.
For ex. Titanium Backup, ROM Manager, etc.
We use ROM Manager to install different ROMs on our phones.
Much to read, my young grasshopper.
OP, I made the Tips/Tricks sticky... would you PM be exactly what you think it lacks? I want to make sure it is applicable to everyone... I thought it was straight-forward, perhaps not.
my phone is rooted. So how do I go about flashing obsidian?
I thought roms were the same as themes? What's the difference?
And just to clarify I understand the tips and tricks thread is sort of the newbies guide but even then theres a lot of terminology that a new user wouldn't understand. I just wanted some basic information that would allow me to transition into the tips and tricks thread more easily.
I appreciate the responses so far
Have you download Rom Manager from the Market? If not, do so.
Then follow the instructions (in the sticky) to flash the recovery (it's the top of the list when you open Rom Manager).
Assuming you did that, you can reboot into recovery, make a backup of your system.. something you can always come back to (a timestamp of your system at that moment).
Download the ROM you want, put it on your internal memory (sdcard/....) NOT in a folder.
Go to Clockwork recovery, choose to insall a zip from sd card... select the name of the ROM and then click Yes to install it.
It will run it's course, then you can just reboot when done.
The first bootup will take a long time (10 minutes probably)... let it boot.... leave your phone alone for like 10 or so minutes after bootup (suggested by Team Whiskey, I never really do this).
It's that easy.
Think of a ROM as an OS... the developers take Froyo (2.2) or Eclair (2.1) and make a lot of tweaks, remove things, add things... basically anything to enhance the user experience.
THEMES are something you flash over a custom ROM... it can change the icons, graphics, notification bar, etc... they are cosmetic. You see in my signature I have Axura 2.0.3 (amazing rom and there is a newer version out) and then I have BlackFroyo (which is the theme) on top of the ROM to change the look of things. Axura has a steel looking notification bar, I much prefer black (hence the theme I chose).
The ONE thing that can be confusing... if you make a backup right now (you have stock eclair), if you flash a froyo rom... you would need to flash either the stock eclair kernel (the download link is also in the sticky) to restore your nandoid backup.... OR, you could just flash another ROM that has a kernel (most do) and you would be good to go too.
And addition to this is to make sure your phone is NOT hardware locked.
To test it:
1) Take out battery from the phone and put it back in again
2) The USB cable plugged into the computer (not in the phone yet)
3) Push and hold down both of the Volume buttons at the same time
4) Plug in USB cable and it should take you into the Download mode.
If it does you are good to go. Just read some about Odin and Stock Android
If it isn't you need to make sure to flash JI6 to your phone (also Stock) onto your phone using Stock Manager. That should fix your hardware locked. Go over the above steps to make sure that is the case.
At this point, I have rooted my device and downloaded rom manager.I believe I have backed up everything after following the directions and I do have the blackfroyo.zip on my sd card and for some reason it won't "go" (although I'm sure there's a step I am missing here, something with obsidian) so that wasn't much of a surprise.
Edit: I noticed I tried to use a theme on there and not the obsidian "OS" (idiot) when I tried the backup thing with rom manager. Where can I download the most recent version of obsidian and/or is axura an acceptable alternative?
VibrantUser1 said:
Edit: I noticed I tried to use a theme on there and not the obsidian "OS" (idiot) when I tried the backup thing with rom manager. Where can I download the most recent version of obsidian and/or is axura an acceptable alternative?
Click to expand...
Click to collapse
Been working on updating the wiki. Please check out http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_SGH-T959#ROMs for the different ROMs currently available.
^^ both are solid. I prefer Auxura *no touchwiz*.... download it from the development section. Place in on the internal (sdcard/ ) and flash it, reboot... I would let the phone chill for awhile then reboot again.... THEN if you want, start messing with the theme. You can see from my signature you and I are similar.
to the OP, I started a noob friendly guide in the Q&A section. Please let me know exactly what you want in there.
Here is a video guide, its kinda old but the principles are the same.
http://theunlockr.com/2010/08/02/how-to-load-a-custom-rom-on-the-samsung-captivate-vibrant/
I have been browsing around and reading on XDA since I got my G1 on release day. I have since upgraded to the MYT3G and now to the Vibrant. I have always used XDA as a source of information for rooting, etc. I don't post very often, but, I would like to throw props out to all the individuals in the thread, this is one of the few threads I have read on XDA that no one got flamed for being a "noob" and asking basic info, the information given was clear, accurate and very helpful. No one pointed to using the search function, everyone just gave good answers. AWESOME
I hope to see more threads like this in the future. Bravo and well done to all.
So I tried installing obsidian 5 and this is what happened. I first put the zip file on my sd card, I did all the necessary prerequisites (I think) using rom manager, flash recovery > vibrant yada yada yada and then pressed install rom from sd card and chose the obsidian zip file. Then the phone starts backing itself up and it finally reaches a point where it says (E: Can't open/sdcard/sd/obsidian_v5_beta.zip (no such file or directory) Installation aborted.
I then try to navigate to the file from the menu but whenever I click the sd file, it just exits, I think it says that no zip file is found or something but when I boot it up normally afterwards, the file is still there.
But the file is within the sd file . . . what am I doing wrong? I tried to fix permissions thinking it was that but no luck.
You probably need to move to the rom to the internal sd card. I thought you're able to add it to the external with the recent update but perhaps not
Sent from my GT-I9000 using XDA App
bellrb19 said:
You probably need to move to the rom to the internal sd card. I thought you're able to add it to the external with the recent update but perhaps not
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
the rom IS on the sd card, unless you mean the memory on the actual phone itself
ROMs go on the root of the internal memory (no folder)... drop it in sdcard/
Also, this was mentioned in Post 8, and in team whiskeys install guide. Please pay attention to details.
oh okay, this whole time I've been thinkin the sd card folder was the root folder. Well I have finally put obsidian with success and now I'm having a difficult time implementing http://forum.xda-developers.com/showthread.php?t=845530. I have downloaded the zip file but I don't understand what "flash it through clockwork recovery" means. It kinda sounds like I should use something in rom manager but I'm not sure, I have tried to reboot into recovery through rom manager with no luck.
I've also tried using metamorph but when i choose the blackfroyo.zip file, it says that the file is invalid and that the theme control file could be missing. Am I doing something wrong here as well?
Thanks for all your help so far, I really appreciate you taking time out of your busy life to help an individual with (what may be to you) simple problems
VibrantUser1 said:
oh okay, this whole time I've been thinkin the sd card folder was the root folder. Well I have finally put obsidian with success and now I'm having a difficult time implementing http://forum.xda-developers.com/showthread.php?t=845530. I have downloaded the zip file but I don't understand what "flash it through clockwork recovery" means. It kinda sounds like I should use something in rom manager but I'm not sure, I have tried to reboot into recovery through rom manager with no luck.
I've also tried using metamorph but when i choose the blackfroyo.zip file, it says that the file is invalid and that the theme control file could be missing. Am I doing something wrong here as well?
Thanks for all your help so far, I really appreciate you taking time out of your busy life to help an individual with (what may be to you) simple problems
Click to expand...
Click to collapse
From where you are now. Make sure the zip file is in the internal sd card, Open rom manager go to install rom from sd card then choose the that file then click ok and CW will do its thing. Also this is only for Obsidian v4.2 and Auxura 2.05. Good luck! Also you should make a nandroid back up first just in case.
Starting this thread again as my previous one was deleted during the board's transformation yesterday...but I think it's important to bring up the subject.
Coming from an older Android terminal (Htc Magic), I still don't understand how so few dev's out there are actually using ClockworkMod Recovery for their ROM. I know, a lot of you come from WM 6.5, where USB-Flash was the only way to go but now things have changed ! If you are fan enough of Android to be willing to flash it completely to the Nand, wiping WinMo6.5, then go with it and start flashing your ROMS the Android way. The CW way !
As a reminder, CW allows to :
- Flash your ROMS from the SD card. Imagine you want to flash a new ROM but have to leave for 2 days without a computer; it's not a problem ! Put it on the SD card and flash it later !
- Easily implement new kernels or updates. Doing so, dev's can propose completely clean build with the option to flash as many add-on's, updates, kernels or fixes you want. Look here : http://forum.xda-developers.com/showthread.php?t=810471. You can't make it easier.
- Partition your SD card with an ext partition the size you want without the need of a software or a linux-based iso. If you are a Windows user, that's a huge time saver !
- Back-up ans restore. That's a HUGE bonus. Want to flash a new ROM ? Back-up all your current ROM (5 minutes), then flash the new one. Don't like after all ? Restore your backup in 5 minutes...
- For me (and here, I'm not my saying it's always the case, just FOR ME), sd data transfer through CW is two times faster than through MAGLDR.
- Many more...
The same goes for EXT. Using data.img is outdated, it's another WinMo days leftover. Ext is actually mounted as an internal memory, allowing Sense Roms. And the apps installed there won't need to be reinstalled every updates...
It's tough for a Android user like myself to find a proper ROM/Zip with data2ext support these days. Pretty much MDJ, thank God for him. It seems that there a lot of ROMS to choose from but actually there isn't. Especially when the DAF to ZIP tool from the board doesn't work with all the DAF's releases (most of the time it's actually the releases that are not made right).
So please, be an Android user and make the step. It's like you found the door but are afraid to come in...
Just go and read the CW tutorial thread if you are unsure. I'll be willing to help also...
Hi i just rooted my legend... was a hell of a ride because i encountered a lot of problems which most of noobs like me have encountered it while experimenting with the rooting process...
i was already stock OTA 2.2 with HBOOT 1.01...
Read several guides to get comfortable and prepared for the journey... in the end , i spent over 6 hrs to get it done... All the problems that ppl have been having boils down to the goldcard... i knew about it but never knew what to expect because in the downgrading step the gold card was not an issue and in the rooting process, it was!
im glad this part is over... i was able to flash the blayo's rom .
Now i feel like trying out new roms, so here's the questions:
1. I have TiBackUp PRO and the Free ROM Manager. Already backed up the Blayo's ROM
2. If i want to try the CM as so many others are doing to try Gingerbread... Is it a matter of going into ROM Manager and choose the CM versions?
3. How do i reload all my apps and settings without redoing everything manually?
4. If the CM is screwed up and doesnt boot, can i just go to recovery and flash a back up?
I just want to make sure i can try new roms without having to reset up all apps like wifi, gmail account...etc
Also, if the CM are buggy and doesnt allow my phone to booot if there is a way to reload my stable blayo rom?
Thanks
sorry i got no answer for you ... but the same think i want to try and i would like to know if and how is that possible ... to return on old rom with all app what we add Manuel . before we try new rom and did not like it..
h-e-a-v-e-n: Why did you even bother writing that?
QkSi1ver: nandroid is a part of your solution for you! That can backup and restore any ROM as a whole thing. Or you can restore only part (/system for instance...)
The other problem might not be solvable, as you will be going from one ROM to a whole differrent one...B08.4 and CM7 are completely different and I dare say no backup program will backup all apps and their data so it would work with such transition (tried Titanium, MyBackup and some other apps...) You can port contacts, messages, calendar evens, but you'd have to set up all you need.
Also there are programs that can batch-install your favorite apps, but you'd still have to set those up
Good luck with messing with it
Dr.Romca said:
h-e-a-v-e-n: Why did you even bother writing that?
Click to expand...
Click to collapse
Just counting posts
For QkSi1ver : I use "Tit..Backup and root " and I'm pleased with it
It can backup and restore " ... Whole app + data ..."
However u have to setup something like Google account and other manually ant to install TitBackup manually as well . Be sure whenever backup or restore to check " App+Data "
Finally the most important ( for me at least ) - the phonebook : I allways store it in my G--account . Good luck .
P.S. : At least u have a sheet of paper and a pencil for the phonenumbers an free time for setting up your phone again
It was a joke
P.S.2 : Be aware that some apps , backed up from one ROM may not work ( or even install ) properly to another , don't know why - should ask someone smarter
Thanks for all your response...
im just getting used to the ROm Manager and the CWM recovery that was installed through ROM Manager...
Correct me if i'm wrong.. if i happen to install onf oe the CM Nightlies and it doesnt boot into the OS, i would still be able to access the bootloader , into the CWM recovery which was intalled with ROM Manager and then load up my back up ROM from blayo right?
Right
Until you update to an uprooted ROM you should be able to access CWM recovery
An advice : use BlaY0's fake flash if you are S-on . It is smoother and easy to use
Sent from my HTC Legend using XDA Premium App
pappilion said:
Right
Until you update to an uprooted ROM you should be able to access CWM recovery
An advice : use BlaY0's fake flash if you are S-on . It is smoother and easy to use
Sent from my HTC Legend using XDA Premium App
Click to expand...
Click to collapse
I thought FakeFlash has been renamed to ROM Manager and was one and the same (since both were written by the same dev right?)
http://forum.xda-developers.com/showthread.php?t=698404
If they are different, what does FakeFlash do that the ROM Manager CWM Recovery doesnt do? Can you point me to the appropriate thread?
Thanks
ps: Damn I'm running out of space... any advice regarding the ext partitionon sd... does it work like it make the OS believe i have more space?
http://forum.xda-developers.com/attachment.php?attachmentid=535315&d=1299449412
Download this file , place it on the root of your SDcard and rename it to " update.zip " . Replace the existing one (if there is) .
About partitioning read this thread :
http://forum.xda-developers.com/showthread.php?t=907436
but I never had this problem so never needed to do this .
All I do is move personal ( downloaded ) apps to SDcard And I worry no more for the free space . At least I don't see why some buddys need so much free space .
I'm using BlaY0's B 0.8 and it is cofigured good enough to leave me a space on the machine .
pappilion said:
http://forum.xda-developers.com/attachment.php?attachmentid=535315&d=1299449412
Download this file , place it on the root of your SDcard and rename it to " update.zip " . Replace the existing one (if there is) .
About partitioning read this thread :
http://forum.xda-developers.com/showthread.php?t=907436
but I never had this problem so never needed to do this .
All I do is move personal ( downloaded ) apps to SDcard And I worry no more for the free space . At least I don't see why some buddys need so much free space .
I'm using BlaY0's B 0.8 and it is cofigured good enough to leave me a space on the machine .
Click to expand...
Click to collapse
I thought i had enough space too... until i started finding new tools available to root users...on top of my usual cant-live-wo
igo (30MB), camera 360 (6mb), swype (5mb) ..etc it runs out pretty quick
QkSi1ver said:
I thought i had enough space too... until i started finding new tools available to root users...on top of my usual cant-live-wo
igo (30MB), camera 360 (6mb), swype (5mb) ..etc it runs out pretty quick
Click to expand...
Click to collapse
" Titanium Backup and Root " has a batch that moves any app that you install ( beside the system ones ) onto SD card .
So i am here with a new idea. A rescue.zip which can be used to rescue any android device which have a recovery like the famous cwm.
So here is it..
Some times we people screw up our android os like hell, and to reboot the device we usualy do a recovery flash of a new os, flash back our nandroid backup ( both on worst conditions) or even do permission fix, clean cache or dalvic cache( those in 'not that worse' conditions) . So thats are all the options we got. Rit?
Although flashing recovery backups, new roms can fix all, it will also eatup our apps, current setups, contacts, msgs, etc( in case we dont have backups) and will probably screw us. All we can do is say " WTF..WTF..WTF.."
SO here is my idea,
Find out the causes of what causes a reboot, non-boot, hang,fc etc.
And keep a zip that can be flashed through recovery, that has a solution for our problem. They may be including..
1) fix permission of system, data, and user data.
2) zipalign the apps
3) fix the default clock speed of processor
4) defragment memory
5) flash a new copy of su and busy box
6)wipe data or system or ext or cache or dalvic cache
7) flash a new copy of framework.res, system-ui.apk, settings.apk with default permissions( those files are kept in separate "custom" folder on the zip, so that end user can put their own files to that "custom" folder for flashing., the reason behind it is known to all, yap. Not all devices have them in common, every device have its own files)
These are all i got for now, pls post ur ideas and knowledge for any possible cure about any problem u faced/ cured. So that we can make it an ultimate rescue.zip that have a cure for 99% problems android os have. The rest 1% will go with a clean flash.( well we cant avoid that if we did something that bad).
So my plan is to use aroma installer( now on hard learning to find how it works). Throw in some scripts, files etc. Into the zip.
And since its not a device specific .zip file, i want to know how and why any problems are caused in any device( there are many common problems, but that is not what i ask for. I ask for device/os specific problems, and not for a problem that we can cure after booting, but for a problem that can make the device un-bootable) . So u people may help me to find those problems and cures for it. For my knowledge i have experience with wildfire and hd2.
Well i will keep this thread for a week or two, so that u can post ur knowledge, and info. after that i will release the file for u.
To the admin. Of the forum, pls keep this thread as announcement so that all can take a look.
HYPERDROID EXTREEM EDITION-THE NEW BENCHMARK ROM FOR HD2.