Database Users

i installed apps to sd and now my phone wont boot.

i downloaded it. installed it with astro. hit reboot. and now the phone wont go past
TMOBILE G1
please help me!!!
oh and im using the newest cyan

trexxcrap2 said:
i downloaded it. installed it with astro. hit reboot. and now the phone wont go past
TMOBILE G1
please help me!!!
oh and im using the newest cyan
Click to expand...
Click to collapse
You're not supposed to use any other apps2sd with cyanogenmod, it says that plainly in the instructions.
I think the easiest thing is to wipe and reflash.

AdamPI said:
You're not supposed to use any other apps2sd with cyanogenmod, it says that plainly in the instructions.
I think the easiest thing is to wipe and reflash.
Click to expand...
Click to collapse
i went to the menu that says restore to factory / wipe and its still not booting. what exactly do i need to do / download. thanks. (sorry for bein dumb)

You need to wipe your ext partition now. Search this forum for the instructions. Then you need to go back to the CyanogenMod thread and memorize all the warnings he has posted.

You better start reading carefully before you brick your phone. There are multiple warnings saying DO NOT USE ANY OTHER APPS2SD METHOD. Just about all roms now are auto when it comes to apps2sd.

i wiped the phone and took out the sd and it still doesnt boot. do i need to root agian? ughhhh

trexxcrap2 said:
i wiped the phone and took out the sd and it still doesnt boot. do i need to root agian? ughhhh
Click to expand...
Click to collapse
Just reflash your rom.

supremeteam256 said:
Just reflash your rom.
Click to expand...
Click to collapse
i searched for "wipe ext partition" and cant find anything. can you point me in the right direction?
and thank you guys so much

go into parted from the recovery console.
use "print" to show your partitions, write down the start and stop locations
use "rm 2" replacing my 2 with your ext partition number but most likely it's 2 anyways
then remake the partition using the start and stop locations from the "print" results.
type "quit" or "exit" (i forget which one.
now type "upgrade_fs"
now type reboot recovery and reflash the rom

mmmmmmmmm yummy, a big ol' bowel of booty loops, the prize in the box is an android

thanks guys! with your help she is up and running
but one more question. since i have the new cyan build and you guys say apps2sd is built in how do i activate it? i have an icon at the top saying memory is low.
last question i promise thank you!!!!

trexxcrap2 said:
thanks guys! with your help she is up and running
but one more question. since i have the new cyan build and you guys say apps2sd is built in how do i activate it? i have an icon at the top saying memory is low.
last question i promise thank you!!!!
Click to expand...
Click to collapse
All you need in order to get the apps to automatically be moved to the SD card, is to have an existing ext3 partition.
As someone said earlier, use Cyan's recovery (which hopefully you flashed to, right?) and use the Parted application to create an ext2 partition. You will then go back to the normal recovery console and run the script "upgrade_fs", which will upgrade the filesystem from ext2 to ext3.

[Q] Motorola Flipout rooted. How to apps2sd?

The Motorola Flipout is fairly easy to root, at least now. Universal Androot (get it here) works.
I am thinking about moving apps to the sd card. However, since I haven't reflashed the phone, and I don't have a ROM for it, I'd like to do it without reflashing. Is that possible?
If I partition an SD card correctly (ext3), copy all of /data onto that partition, and then mount that partition over /data, will that work? Or do I have to mount the card before the phone boots?
Or is it better to just copy /data/data, and mount the partition over /data/data?
It seems to me that mounting over a directory, as opposed to creating a link is least invasive, because on reboot the phone is as it was before. Is this right?
If I have to mount the sdcard before the phone boots, can I just edit one of the init scripts, or is that more complicated? I read about editing init.rc and repacking boot.img
Oh, HOWTO unpack edit and repack boot images seems to give good instructions. On the Flipout, boot is mtd4, and recovery is mtd5.
If I only modify boot, I can't brick my phone too badly? Since I haven't changed recovery, I should be able to recover (?). Can I create an update.zip that flashes the old boot.img and undoes my changes in case something goes wrong?

I just got the flipout from rogers.. Is there anyplace that has a development forum for it? And does it have the efuse ? If it does, is it possible to do what was done with the droid X to it?

How did go so far ghostwheel? I'm eager to hear what else you have figured out.

You use App2Card.apk at below for app2sd without flash:
http://www.tinhte.vn/f280/app2card-2-4-4-20-9-cai-dat-ung-dung-len-nho-phan-vung-456586/
Requires: just a rooted phone
Steps:
- install app
- click Menu / Partition button then use slide bars to create ext2 for your sd card if it hasn't been splited yet
- click Install App2card button
- phone will be rebooted and you just taste app on sd after then
Note: above page has further instruction but it is vietnamese, you must use google translate to get it. This app runs perfectly on my Milestone.
Sent from my Milestone using XDA App

ghostwheel said:
The Motorola Flipout is fairly easy to root, at least now. Universal Androot (get it here) works.
I am thinking about moving apps to the sd card. However, since I haven't reflashed the phone, and I don't have a ROM for it, I'd like to do it without reflashing. Is that possible?
If I partition an SD card correctly (ext3), copy all of /data onto that partition, and then mount that partition over /data, will that work? Or do I have to mount the card before the phone boots?
Or is it better to just copy /data/data, and mount the partition over /data/data?
It seems to me that mounting over a directory, as opposed to creating a link is least invasive, because on reboot the phone is as it was before. Is this right?
If I have to mount the sdcard before the phone boots, can I just edit one of the init scripts, or is that more complicated? I read about editing init.rc and repacking boot.img
Oh, HOWTO unpack edit and repack boot images seems to give good instructions. On the Flipout, boot is mtd4, and recovery is mtd5.
If I only modify boot, I can't brick my phone too badly? Since I haven't changed recovery, I should be able to recover (?). Can I create an update.zip that flashes the old boot.img and undoes my changes in case something goes wrong?
Click to expand...
Click to collapse
Hi,
I'd really like to help with that (I'm a confirm dev. for Cliq and CliqXT phones).
Hopefully we can do great things like we did for Cliq and CLiqXT (upgrade to 2.1!). (check my work at http://bit.ly/adlxmod).
First thing would be to generate a system dump (a dump of all the files in the /system partition). Hopefully we then could generate a custom recovery to flash on the phone, and then custom roms, either base on the dump you provide or other roms from other files. Contact me on twitter @adumont (say it's for Flipout) and I'll guide you to generate the dump!
Looking forward to do great things for that litle phone!

I'm in touch with adlxdum to give him my dump but I think we should start a separated thread like "Custom rom, modding (work in progress)" so that we can follow adlxdum work.
And...thx in advance ;-)

flusshd said:
You use App2Card.apk at below for app2sd without flash:
http://www.tinhte.vn/f280/app2card-2-4-4-20-9-cai-dat-ung-dung-len-nho-phan-vung-456586/
Requires: just a rooted phone
Steps:
- install app
- click Menu / Partition button then use slide bars to create ext2 for your sd card if it hasn't been splited yet
- click Install App2card button
- phone will be rebooted and you just taste app on sd after then
Note: above page has further instruction but it is vietnamese, you must use google translate to get it. This app runs perfectly on my Milestone.
Sent from my Milestone using XDA App
Click to expand...
Click to collapse
Worked!
I couldn't repartition the SD card with the program, so I had to partition it myself. But once that was done, thing seem to work well. A bit slower...
I'm not totally sure how to use the app. Internal seems to still be full, but ext2 on the SD is quite empty. I can't seem to be able to tell if an app is installed to internal or external.
I have to try and install some more apps to see if I run out of memory.
Thanks!!

I'm guessing the flipout and charm are almost identical phones?
My wife has a charm and i'm one of those "i'm not a developer, but I'd like to help" guys.

MrShides said:
I'm guessing the flipout and charm are almost identical phones?
My wife has a charm and i'm one of those "i'm not a developer, but I'd like to help" guys.
Click to expand...
Click to collapse
Yes, I think they are very similar.
One thing that I'm interested in is the accelerometer. On the Flipout, most apps that use it are twisted - for example wikitude, and many games (labyrinth lite works!) I wonder if things work on the charm...

the charm has the same issue.

MrShides said:
the charm has the same issue.
Click to expand...
Click to collapse
thanks! Too bad....

Hi ghostwheel
I've tried installing app2card, but I'm having some problems. I got the new version 2.7.2.
As you said, the partition doesnt work. For me it says sd card is full but its empty...
How did you manually partition it?
I've found some tutorials but it was for other phones and they required a custom rom...

I partitioned the card using a linux computer, with the program fdisk.
I allocated 2GB to a partition of type ext2. But, I think there are many alternatives for partitioning a disk, see this page:
http://androidcommunity.com/forums/f9/how-to-create-ext2-partition-14232/

Wow great link! Many different options! Will try this as soon as I get a micro sd card adapter. Thanks!
You mentioned in your old post that you were having problems using app2card, That you weren't sure if it was working. Have you been able to use it since? Is it working well? and if not have you found an alternative?
I just started using this phone and I'm almost running out of memory... this is quite annoying!

longlife_01 said:
You mentioned in your old post that you were having problems using app2card, That you weren't sure if it was working. Have you been able to use it since? Is it working well? and if not have you found an alternative?
!
Click to expand...
Click to collapse
Yes, I was having problems. Mainly when restarting the phone, sometimes oodles of apps don't work, including launcher pro, and app2card. You have to remember that when the phone reboots and seems to have FC problems, don't chose any home screen as the default, in case it crashes, and keep a spare app2card to reinstall on the sdcard. I think "severe" problems I had only twice, or so.
So, I have almost no problems. Most of the time it works really well. So well, in fact, that I'm a bit afraid to upgrade it, in case something breaks. And, I totally forgot what it is like to have to delete apps to install another one.
I have more of the opposite problem - finding an app among all those installed takes a realllly long time if you forgot its name. Apps organizer helps.

hello, i am new and i have flipout to test in poland orange network, i just root him using 1st post in this forum, great job! thanks

OK, I am having some problems with the current version of app2card. As I said, sometimes when I turn the device off and back on, app2card fails, and many apps give a FC which starting. Then one needs to fix the apps from app2card. It seems that once that is done, some apps lose some of their data. So, for example, droidwall (excellent program!!), lost all firewall data. I'll have to check if newer versions of app2card don't have this problem. It doesn't happen very often.

Instructions to root Flipout
Hi - I'd consider myself a newbie regarding rooting. I just got the AT&T Flipout - I really like the form factor. I just tried running the Universal Androot from my phone but got the security warning message about only being able to install from trusted sources.
Can someone point me in the right direction please?
Many thanks!

it says that with a lot of apps installed like that, including gmote that I downloaded from the developers site. Just look at what you're downloading like you would on any machine

go to settings > Application and tick on unknown sources to be able to install it.

Eris Dual Boot ROM

I'm posting this in General as I don't have the knowledge to port this or develop a similar version for the Slide and I don't want to clutter up the Development forum.
Team ADX over in the Droid Eris forum came up with this gem; a dual boot Eclair Sense/2.2 AOSP ROM. http://forum.xda-developers.com/showthread.php?t=824072
I don't know if this can be done on our phones, but I thought it possible as you don't need to flash a custom recovery.

man this would awesome... the best of both worlds, run and "stock" ROM so we can still receive updates and still have CM.

i was actually thinking about dual boot just the other day! i dont feel like id be switching back and forth from 2 roms but itd be a great feature for those who do. unfortunately i dont think we have that much developers :/

I was reading the instructions for it and it looks like we'll have to wait for S-OFF before we can try it.
Part of the scripting is telling the phone how to partition the phone, sizes of those partitions, and so on. The slide is, generally speaking, un-brickable and it's the measures used to give us that luxury that also prevent us from doing so much like R/W on the system while in a non-recovery boot and changes we do make while booted are just wiped on reboot *sigh* man I love that ramdisk image.
Once we get S-OFF let's get this project started

KCRic said:
I was reading the instructions for it and it looks like we'll have to wait for S-OFF before we can try it.
Part of the scripting is telling the phone how to partition the phone, sizes of those partitions, and so on. The slide is, generally speaking, un-brickable and it's the measures used to give us that luxury that also prevent us from doing so much like R/W on the system while in a non-recovery boot and changes we do make while booted are just wiped on reboot *sigh* man I love that ramdisk image.
Once we get S-OFF let's get this project started
Click to expand...
Click to collapse
I don't think S-OFF is the issue. The partitioning instructions only refer to sdcard. This command:
Code:
mkpartfs primary fat32 0 3500 (can be adjusted to your needs. This partition will be used by the 2.1 rom and by recovery)
I think is only for the phone ROM storage and the for the recovery to find the boot scripts. According to the instructions, they're only partitioning the sdcard to run the AOSP ROM in it. They install the 2.1 Sense ROM to the phone, get it set up, run the boottosd script to boot into the 2.2 AOSP ROM on the sdcard, then set that up and run the boottophone script to go back to 2.1 Sense. They're running a ROM on the sdcard!
As I said before, I think something like this can work for our phones because it doesn't require flashing a recovery. The problem is we don't have the devs to do it.

heybobitsme said:
I don't think S-OFF is the issue. The partitioning instructions only refer to sdcard. This command:
Code:
mkpartfs primary fat32 0 3500 (can be adjusted to your needs. This partition will be used by the 2.1 rom and by recovery)
I think is only for the phone ROM storage and the for the recovery to find the boot scripts. According to the instructions, they're only partitioning the sdcard to run the AOSP ROM in it. They install the 2.1 Sense ROM to the phone, get it set up, run the boottosd script to boot into the 2.2 AOSP ROM on the sdcard, then set that up and run the boottophone script to go back to 2.1 Sense. They're running a ROM on the sdcard!
As I said before, I think something like this can work for our phones because it doesn't require flashing a recovery. The problem is we don't have the devs to do it.
Click to expand...
Click to collapse
I'll take a look. No promises as I'm an übernoob but I would love to have this.
Sent from my T-Mobile myTouch 3G Slide using XDA App

migueltherocker said:
I'll take a look. No promises as I'm an übernoob but I would love to have this.
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
You won't be able to do a simple port. I posted about it more of as a proof of concept. Take the same idea, but obviously using our espresso sense and CM6.

heybobitsme said:
I don't think S-OFF is the issue. The partitioning instructions only refer to sdcard. This command:
Code:
mkpartfs primary fat32 0 3500 (can be adjusted to your needs. This partition will be used by the 2.1 rom and by recovery)
I think is only for the phone ROM storage and the for the recovery to find the boot scripts. According to the instructions, they're only partitioning the sdcard to run the AOSP ROM in it. They install the 2.1 Sense ROM to the phone, get it set up, run the boottosd script to boot into the 2.2 AOSP ROM on the sdcard, then set that up and run the boottophone script to go back to 2.1 Sense. They're running a ROM on the sdcard!
As I said before, I think something like this can work for our phones because it doesn't require flashing a recovery. The problem is we don't have the devs to do it.
Click to expand...
Click to collapse
Ok that makes sense. I thought it was pointing to the partitions on the phone telling it to format to a different size for some reason. Then what's preventing us from doing this? Just a lack of a proper script?

I have not poked around with how they are going about doing everything, but I was the one who got the ball rolling with my dual boot linux script. Conap took the basic setup and made some changes to just install them both on the phone and sdcard. Here is the basic of what it is doing....
The init.rc file found in boot.img has been modified for the froyo rom on the sdcard. The lines where it mounts [email protected] , [email protected], and [email protected] have been changed to the partitions on the sdcard (/dev/block/mcblk0px) The updater-script for froyo has been modified to flash the rom to the partitions on the sdcard. There are some gscripts which are ran from the phone that either modify or replace the boot.img for the rom you want to boot into.
The froyo ROM is running completely off the sdcard and the recovery is left untouched. The script that is required if you are using clockworks is because clockworks sbin and folder locations are setup a little different. I was running into some problems with froyo not recognizing the sdcard after making more than 4 partitions. Several had reported to me that their phones also did not recognize the sdcard, but the Eris phones somehow still did. I am working on something that should run from all android phones and allow you the option of installing whatever ROM you want.
One Last Thing..
Anyone is capable of learning how to do some development work. It just takes some patience and "Google". I had no knowledge of linux or any other scripting languages, except windows batch scripts, until 3 months ago.
There is not much activity on my thread, but once I get a working version finished it will be posted there-----Dual Boot Android

When you get it done and own working, post it in development. I only posted the thread in general because I knew I wasn't going to be the one to develop it. I'm a welder by trade and java and linux are a little beyond me. Although I am trying as I'm using Ubuntu as my main OS and starting reading java tutorials.
Sent from my CM6 Slide

heybobitsme said:
You won't be able to do a simple port. I posted about it more of as a proof of concept. Take the same idea, but obviously using our espresso sense and CM6.
Click to expand...
Click to collapse
If there was ever a reason to get a dev started on a project, this would be it. I would reconsider upgrading from the Slide if we had something this awesome.

unCoRrUpTeD said:
I was running into some problems with froyo not recognizing the sdcard after making more than 4 partitions. Several had reported to me that their phones also did not recognize the sdcard, but the Eris phones somehow still did. [/URL]
Click to expand...
Click to collapse
From what I understand, android can not *see* more than 4 partitions so they had to do something a bit different. Somewhere in the thread that's linked it states what they did to get it to work.

s off is tmobs response to....
KCRic said:
I was reading the instructions for it and it looks like we'll have to wait for S-OFF before we can try it.
Part of the scripting is telling the phone how to partition the phone, sizes of those partitions, and so on. The slide is, generally speaking, un-brickable and it's the measures used to give us that luxury that also prevent us from doing so much like R/W on the system while in a non-recovery boot and changes we do make while booted are just wiped on reboot *sigh* man I love that ramdisk image.
Once we get S-OFF let's get this project started
Click to expand...
Click to collapse
The "companies" wanted s-off due to the large number of brix getting returned for handest exchange and assurion claims, just to figure out somebody pooched sumthin up trying to be a HAXOR, if you haven't done anything like this before. Id suggest peeps get a g1 or some other root & rom-o-matic type for and play with it till you take on your brand new handset trying to install some bleenin edge hack...
You gotta learn to wank off before you can try it with somebody else in the room.
I remember my early days at xda, hacking my mda, xcaliber, and esato hacking SonyEricsson fones before they jumped the shark. People who had the ability to read and follow directions (emphasis on the read part) would study till they were sure they would still have a working fone at the end. Hung out and did great stuff with there handsets. And the noobs were wary enough to investigate before they just started mucking about.
So the handset manu. Had to do sumthin and now we have s-off.
the moral of my high and mighty rant an rave, if you don't know how to do sumthing or if you understand what to do but not the why, then keep reading, read more do less

KCRic said:
From what I understand, android can not *see* more than 4 partitions so they had to do something a bit different. Somewhere in the thread that's linked it states what they did to get it to work.
Click to expand...
Click to collapse
In the newest builds they have 2.1 system on the phones system partition and froyo system on the phones data partition. The data is moved to the SD. 2.1 and previous Rome had no problem with extra partitions on the sdcard.froyo changed the way it mounts the sdcard and could only see 4.
I am actually releasing a dual boot method very shortly that should work on any android phone with very little setup required on your part. I am in the process of finalizing it. Anyone interested in testing please let me know as I want to test on as many devices ad possible
Sent from my HERO200 using XDA App

[Q] Is there a newbie's guide for this phone?

I understand there's a tips and tricks thread that explains things in more detail but how does somebody go from just getting the phone to installing, or even understanding, things like obsidian, onyx, morphing and learning what the basic functions of such programs are.
The question I currently have is concerning flashing custom roms. In the tips & tricks thread, it talks of froyo builds (ex: bionix & frankin-twiz). What is it exactly? From what I understand, it sounds like a mini os that you install onto your device which helps in applying different functions to it, which makes custom roms possible.
I'm currently trying to get http://forum.xda-developers.com/showthread.php?t=845530 to work on my vibrant. Can anybody help a newbie out?

VibrantUser1 said:
I understand there's a tips and tricks thread that explains things in more detail but how does somebody go from just getting the phone to installing, or even understanding, things like obsidian, onyx, morphing and learning what the basic functions of such programs are.
The question I currently have is concerning flashing custom roms. In the tips & tricks thread, it talks of froyo builds (ex: bionix & frankin-twiz). What is it exactly? From what I understand, it sounds like a mini os that you install onto your device which helps in applying different functions to it, which makes custom roms possible.
I'm currently trying to get http://forum.xda-developers.com/showthread.php?t=845530 to work on my vibrant. Can anybody help a newbie out?
Click to expand...
Click to collapse
the link you posted is just to a theme.
to get the theme to work you'll need to be running obsidian first.
so lets see, the easiest way to explain the different versions 2.2, 2.1 1.6, 1.5 and so forth is this...
its pretty much like going from windows 95 to 98 to 2000 to xp to vista and so forth.
our vibrants come with android 2.1, 2.2 is the next version of the os to come out (basicaly like moving from vista to windows 7)
the different roms like obsidian and Macnut and such are just names that the developers gave their roms.
what happens is a developer starts out with a version of android (in the case of Macnut and Obsidian this is 2.2)
and then they add their own modified tweaks and such to it.
and so in the end they get Obsidian which is a modified 2.2
or Macnut which is also a modified 2.2
they differ a bit though as Obsidian is based almost totaly on a leaked version of 2.2 for the US vibrant, where Macnut is based alot on the 19000 version of 2.2 for the european phones.
so when choosing a rom just choose the base you want first: 2.1 or 2.2
then look through the tweaks on a few roms and read some of the thread for that rom untill you get a feel for what makes it unique
you can also just experiment by flashing a rom for a day or so and then switching to a new one untill you find one you like.
Morphing is a way to apply a theme to a rom, this does not generaly change functionality at all, it only changes apearance.
alot of themes are either morphs (you install them using metamorph, which is an app from the market)
or they also come in zip format (which are installed by flashing from recovery)
for the theme you posted you will need to flash obsidian, and then flash the zip for the theme afterwards.
have you rooted your device yet?
thats the place to start, if you need help just pm me or repost here and I'll do what I can.

also, there is a "newbie's guide":
http://forum.xda-developers.com/showthread.php?t=732458

nearblack said:
also, there is a "newbie's guide":
http://forum.xda-developers.com/showthread.php?t=732458
Click to expand...
Click to collapse
lol true true

Before you even want to start with anything, you have to learn what 'rooting' your phone means.
Without root, you won't be able to do any of the above. You might be able to download the programs necessary, but you won't be able to use them.
For ex. Titanium Backup, ROM Manager, etc.
We use ROM Manager to install different ROMs on our phones.
Much to read, my young grasshopper.

OP, I made the Tips/Tricks sticky... would you PM be exactly what you think it lacks? I want to make sure it is applicable to everyone... I thought it was straight-forward, perhaps not.

my phone is rooted. So how do I go about flashing obsidian?
I thought roms were the same as themes? What's the difference?
And just to clarify I understand the tips and tricks thread is sort of the newbies guide but even then theres a lot of terminology that a new user wouldn't understand. I just wanted some basic information that would allow me to transition into the tips and tricks thread more easily.
I appreciate the responses so far

Have you download Rom Manager from the Market? If not, do so.
Then follow the instructions (in the sticky) to flash the recovery (it's the top of the list when you open Rom Manager).
Assuming you did that, you can reboot into recovery, make a backup of your system.. something you can always come back to (a timestamp of your system at that moment).
Download the ROM you want, put it on your internal memory (sdcard/....) NOT in a folder.
Go to Clockwork recovery, choose to insall a zip from sd card... select the name of the ROM and then click Yes to install it.
It will run it's course, then you can just reboot when done.
The first bootup will take a long time (10 minutes probably)... let it boot.... leave your phone alone for like 10 or so minutes after bootup (suggested by Team Whiskey, I never really do this).
It's that easy.
Think of a ROM as an OS... the developers take Froyo (2.2) or Eclair (2.1) and make a lot of tweaks, remove things, add things... basically anything to enhance the user experience.
THEMES are something you flash over a custom ROM... it can change the icons, graphics, notification bar, etc... they are cosmetic. You see in my signature I have Axura 2.0.3 (amazing rom and there is a newer version out) and then I have BlackFroyo (which is the theme) on top of the ROM to change the look of things. Axura has a steel looking notification bar, I much prefer black (hence the theme I chose).
The ONE thing that can be confusing... if you make a backup right now (you have stock eclair), if you flash a froyo rom... you would need to flash either the stock eclair kernel (the download link is also in the sticky) to restore your nandoid backup.... OR, you could just flash another ROM that has a kernel (most do) and you would be good to go too.

And addition to this is to make sure your phone is NOT hardware locked.
To test it:
1) Take out battery from the phone and put it back in again
2) The USB cable plugged into the computer (not in the phone yet)
3) Push and hold down both of the Volume buttons at the same time
4) Plug in USB cable and it should take you into the Download mode.
If it does you are good to go. Just read some about Odin and Stock Android
If it isn't you need to make sure to flash JI6 to your phone (also Stock) onto your phone using Stock Manager. That should fix your hardware locked. Go over the above steps to make sure that is the case.

At this point, I have rooted my device and downloaded rom manager.I believe I have backed up everything after following the directions and I do have the blackfroyo.zip on my sd card and for some reason it won't "go" (although I'm sure there's a step I am missing here, something with obsidian) so that wasn't much of a surprise.
Edit: I noticed I tried to use a theme on there and not the obsidian "OS" (idiot) when I tried the backup thing with rom manager. Where can I download the most recent version of obsidian and/or is axura an acceptable alternative?

VibrantUser1 said:
Edit: I noticed I tried to use a theme on there and not the obsidian "OS" (idiot) when I tried the backup thing with rom manager. Where can I download the most recent version of obsidian and/or is axura an acceptable alternative?
Click to expand...
Click to collapse
Been working on updating the wiki. Please check out http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_SGH-T959#ROMs for the different ROMs currently available.

^^ both are solid. I prefer Auxura *no touchwiz*.... download it from the development section. Place in on the internal (sdcard/ ) and flash it, reboot... I would let the phone chill for awhile then reboot again.... THEN if you want, start messing with the theme. You can see from my signature you and I are similar.
to the OP, I started a noob friendly guide in the Q&A section. Please let me know exactly what you want in there.

Here is a video guide, its kinda old but the principles are the same.
http://theunlockr.com/2010/08/02/how-to-load-a-custom-rom-on-the-samsung-captivate-vibrant/

I have been browsing around and reading on XDA since I got my G1 on release day. I have since upgraded to the MYT3G and now to the Vibrant. I have always used XDA as a source of information for rooting, etc. I don't post very often, but, I would like to throw props out to all the individuals in the thread, this is one of the few threads I have read on XDA that no one got flamed for being a "noob" and asking basic info, the information given was clear, accurate and very helpful. No one pointed to using the search function, everyone just gave good answers. AWESOME
I hope to see more threads like this in the future. Bravo and well done to all.

So I tried installing obsidian 5 and this is what happened. I first put the zip file on my sd card, I did all the necessary prerequisites (I think) using rom manager, flash recovery > vibrant yada yada yada and then pressed install rom from sd card and chose the obsidian zip file. Then the phone starts backing itself up and it finally reaches a point where it says (E: Can't open/sdcard/sd/obsidian_v5_beta.zip (no such file or directory) Installation aborted.
I then try to navigate to the file from the menu but whenever I click the sd file, it just exits, I think it says that no zip file is found or something but when I boot it up normally afterwards, the file is still there.
But the file is within the sd file . . . what am I doing wrong? I tried to fix permissions thinking it was that but no luck.

You probably need to move to the rom to the internal sd card. I thought you're able to add it to the external with the recent update but perhaps not
Sent from my GT-I9000 using XDA App

bellrb19 said:
You probably need to move to the rom to the internal sd card. I thought you're able to add it to the external with the recent update but perhaps not
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
the rom IS on the sd card, unless you mean the memory on the actual phone itself

ROMs go on the root of the internal memory (no folder)... drop it in sdcard/
Also, this was mentioned in Post 8, and in team whiskeys install guide. Please pay attention to details.

oh okay, this whole time I've been thinkin the sd card folder was the root folder. Well I have finally put obsidian with success and now I'm having a difficult time implementing http://forum.xda-developers.com/showthread.php?t=845530. I have downloaded the zip file but I don't understand what "flash it through clockwork recovery" means. It kinda sounds like I should use something in rom manager but I'm not sure, I have tried to reboot into recovery through rom manager with no luck.
I've also tried using metamorph but when i choose the blackfroyo.zip file, it says that the file is invalid and that the theme control file could be missing. Am I doing something wrong here as well?
Thanks for all your help so far, I really appreciate you taking time out of your busy life to help an individual with (what may be to you) simple problems

VibrantUser1 said:
oh okay, this whole time I've been thinkin the sd card folder was the root folder. Well I have finally put obsidian with success and now I'm having a difficult time implementing http://forum.xda-developers.com/showthread.php?t=845530. I have downloaded the zip file but I don't understand what "flash it through clockwork recovery" means. It kinda sounds like I should use something in rom manager but I'm not sure, I have tried to reboot into recovery through rom manager with no luck.
I've also tried using metamorph but when i choose the blackfroyo.zip file, it says that the file is invalid and that the theme control file could be missing. Am I doing something wrong here as well?
Thanks for all your help so far, I really appreciate you taking time out of your busy life to help an individual with (what may be to you) simple problems
Click to expand...
Click to collapse
From where you are now. Make sure the zip file is in the internal sd card, Open rom manager go to install rom from sd card then choose the that file then click ok and CW will do its thing. Also this is only for Obsidian v4.2 and Auxura 2.05. Good luck! Also you should make a nandroid back up first just in case.

[Q] Frustrated NOOB needs a little help installing rom

After several days struggle, I'm burned out. Some of the threads here have 100+ pages, and searches yield too much outdated, irrelevant info. So, I'm asking for some direction (as simple as possible, please).
I'm trying to set up my unlocked HD2 (originally T-Mo, but unlocked and using AT&T) for dual-boot, WM6.5 and Android. As you know, the choices for android rom are mind-boggling. I don't need anything fancy, just something up-to-date and stable. I would like, however, something LOUD.
Here's what I've tried so far:
Using despy1989's March 2010 guide (four years old already!), I have my HD2 booting up asking to choose Android or WM. If I choose Android, it does nothing, and defaults to WM.
I have SUNDAWG-CM7-NATIVESD rom loaded (or I think I do) in the android directory of the SD card. I'm not sure this one will meet my LOUD requirement, but since it won't load, I can't tell.
If I tap the new Android icon, it does nothing. If I tap the Android SoftReset icon, it resets but does not load Android, goes to WinMo.
If I go to File Explorer, and run haret, I get the message "failed to load file \storagecard\android\sdcard\nativesd\zimage"
What do I do next?
ANY help is much appreciated.

How did you installed Android as NativeSD? Did you made a partition on your SD in EXT4 which is needed for installing the Rom? Why you want keep WM 6.5 anyway?

Reply to your ?
eclyptos said:
How did you installed Android as NativeSD? Did you made a partition on your SD in EXT4 which is needed for installing the Rom? Why you want keep WM 6.5 anyway?
Click to expand...
Click to collapse
AFAIK, yes it is installed as NativeSD, Did not make a partition (there was conflicting advice as to whether it was necessary. I'm not ready to go "all in" and reformat my old SD card yet.)
Want to keep WM6.5 since it is the only one that works the way I need. I've been playing with a Sony X10a with Android 1.6 and am frustrated. I specifically need LOUDNESS and customizable ringtones and notifications, and relatively easy syncing with my PC.
Thanks for your reply and any further advice.

If you do not make a partition EXT4 it will never be installed so you just messing around that is why is not working. From WM6.5 can be run only SD Android version or there is another way, much longer but it's the way how it have to be.
Install MAGLRD and Recovery, probably this will wipe the phone, make the partition on SD to Install NativeSD, Install the Rom as Native SD. Then flash back the Stock WM6.5, this will wipe MAGLRD and Recovery. Now start again Android from the folder created from the installation. It should boot.

Reply to your suggestion
eclyptos said:
If you do not make a partition EXT4 it will never be installed so you just messing around that is why is not working. From WM6.5 can be run only SD Android version or there is another way, much longer but it's the way how it have to be.
Install MAGLRD and Recovery, probably this will wipe the phone, make the partition on SD to Install NativeSD, Install the Rom as Native SD. Then flash back the Stock WM6.5, this will wipe MAGLRD and Recovery. Now start again Android from the folder created from the installation. It should boot.
Click to expand...
Click to collapse
Sorry. As a NOOB, what you've suggested is Greek to me and far too complicated. I can't risking wiping the phone and bricking it.

techcntr said:
Sorry. As a NOOB, what you've suggested is Greek to me and far too complicated. I can't risking wiping the phone and bricking it.
Click to expand...
Click to collapse
I did this 100 times and HD2 is not that easy to brick, I never heard about bricked HD2 before. Then if you don't want to do it you will never have NativeSD on your phone because the NativeSD have to be installed on EXT4 partition, there is no other way. The only Android which you can use is from this section HERE. Put it on SD with other stuff and run with the application from WM6.5. First boot is very long.

eclyptos said:
If you do not make a partition EXT4 it will never be installed so you just messing around that is why is not working
Click to expand...
Click to collapse
Sounds like "eating without plate"..
techcntr said:
Sorry. As a NOOB, what you've suggested is Greek to me and far too complicated.
I can't risking wiping the phone and bricking it.
Click to expand...
Click to collapse
No, wipe (task29) won't even touch SPL parts.
So, unless you're super duper unlucky using wipe command, you won't bricking your device.
I don't know if you're already flash HSPL.
I suggest you to flash HSPL first, then the rest is up to you..

Shadow_Nexus said:
Sounds like "eating without plate"..
Click to expand...
Click to collapse
Shadow_Nexus said:
No, wipe (task29) won't even touch SPL parts.
So, unless you're super duper unlucky using wipe command, you won't bricking your device.
I don't know if you're already flash HSPL.
I suggest you to flash HSPL first, then the rest is up to you..
Click to expand...
Click to collapse
Yeah, You are right too, I forgot to mention HSPL and Radio have to be installed before do anything. :good:
It's all easy like eat ice cream.
Some Tips How To Do It HERE

do update for a fee
eclyptos said:
Yeah, You are right too, I forgot to mention HSPL and Radio have to be installed before do anything. :good:
It's all easy like eat ice cream.
Some Tips How To Do It HERE
Click to expand...
Click to collapse
Do you anyone who does this sort of thing for a reasonable fee? Preferably in the SW USA?

techcntr said:
Do you anyone who does this sort of thing for a reasonable fee? Preferably in the SW USA?
Click to expand...
Click to collapse
If you really can't do this I can assist you via Team Viewer, I will tell you what to do and what to download. Before that I have to see your bootloader. Send me a PM to arrange an appointament. I don't know nobody in USA at the moment or I don't know they are.

techcntr said:
So, I'm asking for some direction (as simple as possible, please).
I'm trying to set up my unlocked HD2 (originally T-Mo, but unlocked and using AT&T) for dual-boot, WM6.5 and Android.
What do I do next?
ANY help is much appreciated.
Click to expand...
Click to collapse
Read this thread in HTC Leo: HD2 > HD2 Android > HD2 Android SD Development > [GUIDE] NativeSD for Windows Mobile (WM6.5) New Users
http://forum.xda-developers.com/showthread.php?t=1986437
Feel free to ask for help there.
Cheers
Tom
My Note 2 to you

broken links, etc.
Szczepanik said:
Read this thread in HTC Leo: HD2 > HD2 Android > HD2 Android SD Development > [GUIDE] NativeSD for Windows Mobile (WM6.5) New Users
http://forum.xda-developers.com/showthread.php?t=1986437
Feel free to ask for help there.
Cheers
Tom
My Note 2 to you
Click to expand...
Click to collapse
Been trying to follow your steps, but when I get to "Native SD Install Recovery", the links are broken. (this is the very kind of frustrations I'm having - there does not appear to be one single step-by-step guide without numerous links to invalid or outdated sites. I don't need advertising either.)
I can't find the 4EXT partition (in W8.1) in order to install anything.
So, now what?