Let me explain to you the whole story. I obviously know im going to get flamed for this one. I will give you the short short version
I had a rooted MT3G fender with this Rom installed
http:/forum.xda-developers.com/showthread.php?t=669911
It worked all good until i started messing with stuff. I wanted this rom installed
http:/forum.xda-developers.com/showthread.php?t=673394
Since it said 32a and MT3G fender is 32a i assumed that it will install and no problems. So i used the gold card to change radio and spl to the 3.22 series. only to find out that they dont work for my phone. based on this post
"You are now screwed with a downgraded SPL and radio that do not work on this phone YAAAAAAY." -crypysmoker-
[THUNK AND FIXED] Rooting Mytouch Fender LE 32a/ Mytouch 1.2 DONT!!
http:/forum.xda-developers.com/showthread.php?t=622530
So now im thinking great i didnt catch that so let me just move back to where i was before. using the last section of that previous thread to install the stock radio and spl. i have done this already and know it works. so i install the stock radio and spl and the custom recovery. Boot up into recovery and restore nandroid. everything is going ok utill.....it locks up in a boot loop. i then boot back up into recovery and erase data. after that i tryed another nandroid restore and to my wonderful surprise i now lost the ability to mount the sdcard. i restarted and tryed many different cards and all failed. I then boot up into hboot restore with the goldcard and it then locks up at system.
Great now im looking for something to fix this whole mess. after that i try to reinstall the original spl and radio. I then have an error "signature verify failed." Now im thinking WTF!!!!!
I then find a thread about the RUU and how to turn off "S-on" if i install this official HTC app. However come to find out its the asia version. WONDERFUL FOR ME!!! I then found the Official T-mobile MT3G RUU, installed it and now i have a fastboot installed with a memchip with a red circle around it, not the 3 skate droids, and cant boot into HBOOT ,with the volume down button. All that i see is "RUU USB." I have adb but now get the error "remote not allowed." it used to be "signature verify failed." i have no recovery, no HBOOT, just fast boot with RUU USB.
How to i fix this mess up and get back to this?
T-Mobile MyTouch 3g Fender Edition Stock ROM with ROOT!
http:/forum.xda-developers.com/showthread.php?p=5451898&posted=1#post5451898
This is what i have and show
Sapphire pvt 32a ship s-on G
Hboot-1.33.0013 (sapp31000)
cpld-13
radio-2.22.23.02
oct 21 2009,22:33:27
RUU USB
This is definitely a snowball effect right here.
Oh also i cant go and exchange the MT3g fender because im past my 14 days and i already did it on the first day. LOL
I actually am stuck on the same screen with the same phone. I hope someone has been able to get this fixed
Damn, not trying to be mean, but you screwed up a lot.
I have the same version device as you, and I upgraded my radio/SPL. and did a lot of stuff, i semi-bricked it, but i got it working again. I suggest you re-root your whole entire phone. including flashing all the radios, spl,recovery, and etc.
Try following this theunlockr[DOT]com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
The problem is that the phone is stuck in a bit of an interesting state. You can't flash from an RUU at this point because the engineering SPL used to root the phone is version 2.53.x, while the RUU's ROM is 2.10.x. You also cannot flash any images to the phone because the SPL is locked (S-ON). So the only way to fix the phone at this point would be to somehow get an HTC-signed 2.53+ ROM for the SAPP31000 (mytouch 3g 1.2/fender) or find a way to unlock the SPL. I had a nice chat with some of the Modaco guys and we went through a lot of options with none of them working. The phone's basically in a bit of a chicken vs. egg state. So personally, I will be building a serial cable to manually unlock the SPL so that I can flash images back on manually.
So, while I wish it was as easy as just re-flashing the phone, you can't do that with a locked SPL and no HBOOT mode available. Onward to a serial/TTL cable advendure!
Once I get the parts in to build it, I'll follow up here with my results
shintokun said:
I suggest you re-root your whole entire phone. including flashing all the radios, spl,recovery, and etc.
Click to expand...
Click to collapse
Im returning my phone to sprint and need to return software back to stock. I ran the 3.29 RUU which removed root access but when I checked the bootloader screen I see S-OFF because of unrevoked forever.
I donwloaded the s-on/off tool but I can't flash it because I'm no longer rooted and no longer have AmonRa or any recovery program.
What should I do? I need to do this tonight to return the phone tomorrow. Thanks!
Pretty sure you need to run the unrevoked forever tool to turn s-off to s-on, then use a PC36IMG, or RUU...
I believe you have to reroot then!
Dammit, I just realized I should have done it first...
lol.
Hope I don't mess this up!
i have a htc hero (probably flashed to pocket communications) anyway want to root it(kind of got it tried universalAndRoot-1.6.2-beta) have superuser and wireless tether working but on the bootloader it still states ship S-On.
Bootloader:
Herc XC Ship S-on
hboot 1.47.0000 (Hero20000)
Radio 2.42.01.04.23
under sofware info
Firmware---2.1-update1
baseband---2.42.01.04.23
kernel------2.6.29-bc0d2cff
build-------2.39.591.1cl194966
software---2.39.591.1
pri---------2.36_136
prl---------40427
o.k. so i am trying to install hercRa recovery so that i can install custom roms. but i am still showing S-on........any help would be appreciated. I think the phone is from uscelluar.
xda751 said:
i have a htc hero (probably flashed to pocket communications) anyway want to root it(kind of got it tried universalAndRoot-1.6.2-beta) have superuser and wireless tether working but on the bootloader it still states ship S-On.
Bootloader:
Herc XC Ship S-on
hboot 1.47.0000 (Hero20000)
Radio 2.42.01.04.23
under sofware info
Firmware---2.1-update1
baseband---2.42.01.04.23
kernel------2.6.29-bc0d2cff
build-------2.39.591.1cl194966
software---2.39.591.1
pri---------2.36_136
prl---------40427
o.k. so i am trying to install hercRa recovery so that i can install custom roms. but i am still showing S-on........any help would be appreciated. I think the phone is from uscelluar.
Click to expand...
Click to collapse
You are rooted and can flash whatever you want from what you described. Getting s-off is different. Please click my name and see the links thread I started, it has links to both s-off methods for heroc. It unlocks your bootloader, go read about it. Again, you don't really need it, but it's kinda cool.
sent from a series of tubes.
Can you help me to fix my htc desire 816 i accident delete the file framework after that its blinking and shutting down when i open again cant open. I try to wipe or format using power botoon and v+ but useless help me please . What is the other way to fix that.
Today I accidently turned it on (the thing in the bootloader) and now I can't turn it off no matter what so I can do a revert to stock .img, I used the PDI15.img or w.e that would revert back to stock forgetting that I had the newest radio and now I can't revert to stock or turn S-OFF. Please help
Current Configurations:
GLACIER PVT SHIP S-ON
HBOOT - 0.86.0000
MICORP - 0429
RADIO - 26.09.04.26_M
eMMC - BOOT
More Info:
When I use a PDIMG or w/e file it errors out as being old
Can you still boot? Like into your rom? If so just try rooting using visionary and using a root explorer to push the gfree files to data/local/ then just follow the normal rooting procedure
Sent from my HTC Glacier using XDA Premium App
Nicgraner said:
Can you still boot? Like into your rom? If so just try rooting using visionary and using a root explorer to push the gfree files to data/local/ then just follow the normal rooting procedure
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
Yeah I can still boot into my rom, bootloader, and recovery and okay will try that
EDIT: Okay I did, I tried turning S-OFF but it says something about eMMC power cycle failed
XxKOLOHExX said:
Yeah I can still boot into my rom, bootloader, and recovery and okay will try that
EDIT: Okay I did, I tried turning S-OFF but it says something about eMMC power cycle failed
Click to expand...
Click to collapse
dude! I noticed this also this morning. I am rooted(using setcpu and root explorer just fine) but in hboot it says s=on. I was also wanting to flash the stock .img and start fresh. thought I was the only one having this problem. tried everything you did and got the same results.
What ROM are you on? AFAIK, gfree, requires the stock kernel to do what it does. How on earth did you turn S-ON? That sort of thing shouldn't just happen out of nowhere.
How is the progress on fixing your phone?
jdkoren said:
What ROM are you on? AFAIK, gfree, requires the stock kernel to do what it does. How on earth did you turn S-ON? That sort of thing shouldn't just happen out of nowhere.
Click to expand...
Click to collapse
currently on Evil D mTGB v1.0, Faux 0.0.7 CFS lv leak kernel. everything works fine, no FC's or anything. just having the same issues as XxKOLOHExX. I really have no idea how it turned on by itself, I dont remember doing anything out of the ordinary
I was trying to get back to stock from the rom i was on. (MIUI) and when I used the stock .img though the bootloader it went all good till it rebooted, then it said failed because the file was old and now I am stuck with s-on and I don't know how to turn it off
How did you get to the stock bootloader? Did you have eng bootloader at one point? What meth of root did you use? Alot of info missing.
Now download the stock radio.img and push it via adb or just download the PD15IMG.zip (radio only not rom included). Once this is done you can revert back to stock rom/radio using standard PD15IMG.zip (radio+rom). Now depending on the type of root you used it would depend if you still have radio flag on/off even if your reverted back to stock bootloader.
PS: You can get PD15IMG.zip (stock radio) from master radio thread and PD15IMG.zip (stock radio/rom) by doing search.
PermROOT said:
How did you get to the stock bootloader? Did you have eng bootloader at one point? What meth of root did you use? Alot of info missing.
Now download the stock radio.img and push it via adb or just download the PD15IMG.zip (radio only not rom included). Once this is done you can revert back to stock rom/radio using standard PD15IMG.zip (radio+rom). Now depending on the type of root you used it would depend if you still have radio flag on/off even if your reverted back to stock bootloader.
PS: You can get PD15IMG.zip (stock radio) from master radio thread and PD15IMG.zip (stock radio/rom) by doing search.
Click to expand...
Click to collapse
It flashed the bootloader when I flashed the PD15IMG.zip, it just stop when I did the whole procedure. Nope never flashed an Engineer Bootloader. I used theunlockr.com sites method
I tried that, it uziped then tried to flash the radio then just went back to the original menu for the bootloader
If you used the VISIONary+ (TempROOT) and root.sh (PermROOT) meth then you already had engineering hboot (0.85.2007) pushed though terminal on "/dev/block/mmcblk0p18". Now you did something in between is what I would like to know.
As you flashed new radio (26.09.04.26_M) which I am clear. But what I like to know is how did you end up with default hboot (0.86.0000)? If you had S=OFF you didn't lose it via flashing new radio. Which PD15IMG.zip did you install? Now when you say PD15IMG.zip what do you mean? It can be anything as its default mt4g system based image. Stock PD15IMG.zip = (Sense 2.2.1 Rom/Radio 26.03.02.26_M). Did you install leaked PD15IMG.zip from Panache? or GB2.3.3S?
Are you not 1 of the Royal dev's? who try to take over Silence's IG if I recall. I am just assuming here but this is why you do "NOT" dump system image via hboot. What you should have done was do complete total system wipe (format /data; /system) and then flash new edify based CWMR flashable rom.
PermROOT said:
If you used the VISIONary+ (TempROOT) and root.sh (PermROOT) meth then you already had engineering hboot (0.85.2007) pushed though terminal on "/dev/block/mmcblk0p18". Now you did something in between is what I would like to know.
As you flashed new radio (26.09.04.26_M) which I am clear. But what I like to know is how did you end up with default hboot (0.86.0000)? If you had S=OFF you didn't lose it via flashing new radio. Which PD15IMG.zip did you install? Now when you say PD15IMG.zip what do you mean? It can be anything as its default mt4g system based image. Stock PD15IMG.zip = (Sense 2.2.1 Rom/Radio 26.03.02.26_M). Did you install leaked PD15IMG.zip from Panache? or GB2.3.3S?
Are you not 1 of the Royal dev's? who try to take over Silence's IG if I recall. I am just assuming here but this is why you do "NOT" dump system image via hboot. What you should have done was do complete total system wipe (format /data; /system) and then flash new edify based CWMR flashable rom.
Click to expand...
Click to collapse
Yeah I know that, I Was trying to go back to stock everything using the unrooting method(PD15IMG.zip). Using this file I was able to get through the first step and it rebooted, then it went back to bootloader and now it won't take the PD15IMG.zip saying that it is an older file. Yes I am one of the devs, That's why before posting I tried everything I could think of, gfree, old unrooting methods, etc. I didn't use a dump lol I'm not that noobish haha
Thats where you got owned as the PD15IMG.zip (stock rom/radio) just reverted back to hboot (0.86.0000) from eng hboot (0.85.2007). While you attempted to go further you couldn't do to security turning on (S=ON). Now this normally wouldn't be problem but since you had newer radio (26.09.04.26_M) it wouldn't replace it with old.
All you had to do was follow few simple meths which you should have learned it over the years. Go back same way you came by first reverting back to original radio image and then after doing complete system wipe you should have reverted back to original factory based via stock pd15img.
Ill post back with solution soon let me think this out. I don't want to brick your phone trying to manually push the radio.img nor the eng_hboot.img. As if you try to push radio now would fail on write and give you hard brick. Since S=ON and if you try to push eng_hboot.img who knows what will happen as no R/W access on mmcblk could could also fail thus giving bad flash which can also brick the device. Ill see what happens and post back at... you folks just made more extra work for me.
PermROOT said:
Thats where you got owned as the PD15IMG.zip (stock rom/radio) just reverted back to hboot (0.86.0000) from eng hboot (0.85.2007). While you attempted to go further you couldn't do to security turning on (S=ON). Now this normally wouldn't be problem but since you had newer radio (26.09.04.26_M) it wouldn't replace it with old.
All you had to do was follow few simple meths which you should have learned it over the years. Go back same way you came by first reverting back to original radio image and then after doing complete system wipe you should have reverted back to original factory based via stock pd15img.
Ill post back with solution soon let me think this out. I don't want to brick your phone trying to manually push the radio.img nor the eng_hboot.img. As if you try to push radio now would fail on write and give you hard brick. Since S=ON and if you try to push eng_hboot.img who knows what will happen as no R/W access on mmcblk could could also fail thus giving bad flash which can also brick the device. Ill see what happens and post back at... you folks just made more extra work for me.
Click to expand...
Click to collapse
Thank you so much for the help
PermROOT said:
Thats where you got owned as the PD15IMG.zip (stock rom/radio) just reverted back to hboot (0.86.0000) from eng hboot (0.85.2007). While you attempted to go further you couldn't do to security turning on (S=ON). Now this normally wouldn't be problem but since you had newer radio (26.09.04.26_M) it wouldn't replace it with old.
All you had to do was follow few simple meths which you should have learned it over the years. Go back same way you came by first reverting back to original radio image and then after doing complete system wipe you should have reverted back to original factory based via stock pd15img.
Ill post back with solution soon let me think this out. I don't want to brick your phone trying to manually push the radio.img nor the eng_hboot.img. As if you try to push radio now would fail on write and give you hard brick. Since S=ON and if you try to push eng_hboot.img who knows what will happen as no R/W access on mmcblk could could also fail thus giving bad flash which can also brick the device. Ill see what happens and post back at... you folks just made more extra work for me.
Click to expand...
Click to collapse
lol sorry for the extra work, just dont wanna have the chance of bricking my phone but like XxKOLOHExX I wanted to revert back to stock from mTGB using the stock PD15IMG_Glacier_TMOUS_1.17.531.2_Radio_12.28b.60.140e_26.03.02.26_M_release_155771_signed. everything he described is happening to me also, step by step. I rooted with the visionary+ and permroot method(unlockr). I did download and flash the 26.08.04.30 radio. heres what I see in hboot
GLACIER PVT SHIP S-ON
HBOOT-0.86.0000
MICROP-0429
RADIO-26.08.04.30_M3
eMMC-boot
Sep 27 2010, 11:12:59
so what youre saying is that we should try flashing the stock radio first, wipe the whole phone(including sdcard?), then flash the stock PD15IMG? Ill give it a shot real quick, thanks
*edit* hboot wont even let me flash the stock radio, itll say checking but wont actually let me update it
Well clarknick27 the problem here is that root.sh to gain PermROOT via VISIONary+ just push the 0.85.2007 eng hboot and giving temporary S=OFF, the true security flag as we know it is controlled in the radio. So when you try to revert back using stock PD15IMG (rom/radio) it reverted back to the stock 0.86.0000 hboot thus turning on the security flag on.
What you all should have done is reverted back same way you installed it. Which would have been first use PD15IMG.zip (stock radio) and then use stock PD15IMG.zip (radio/rom). I still need some sleep lol I just wokeup after sleeping 2hours.
The MT4G I tested on I rooted it via VISIONary+ and then flashed GB Leak rom not the PD15IMG.zip (leak radio/rom) which contained the 0.89.0005 hboot. So after flashing stock radio PD15IMG.zip (radio 26.03.02.26_M) I was able to flash stock PD15IMG.zip (rom/radio) without problem. Which is same as I suspected even after S=ON due to same version radio no problem. If I had newer radio after that point it would be locked out. Let me go to sleep and wakeup and ill see what happens from there. As I have clean MT4G ill have to reroot it first.
BTW XxKOLOHExX and clarknick27 just in case my account gets disabled. Do the following and report it here and ill see from there.
1) Which working rom you currently have installed on the device?
I know trying to reroot using gfree may give you similar result as my test: http://forum.xda-developers.com/showthread.php?t=1066966 < not important but unable to root on newer rom.
2) What happens when you try to reroot it using VISIONary+ (TempROOT) and root.sh (PermROOT)?
Did you try it? If so what is the end result? so post back. Ill check and go from there.
PermROOT said:
BTW XxKOLOHExX and clarknick27 just in case my account gets disabled. Do the following and report it here and ill see from there.
1) Which working rom you currently have installed on the device?
I know trying to reroot using gfree may give you similar result as my test: http://forum.xda-developers.com/showthread.php?t=1066966 < not important but unable to root on newer rom.
2) What happens when you try to reroot it using VISIONary+ (TempROOT) and root.sh (PermROOT)?
Did you try it? If so what is the end result? so post back. Ill check and go from there.
Click to expand...
Click to collapse
1) currently running Evil D's mTGB v1.0 rom with Faux's 0.0.7 CFS LV leak kernel. tried rooting with visionary and terminal first, no success. I then tried out the gfree method, and got "Attempting to power cycle eMMC...failed. Module failed to load: No such file or directory."
2) I installed Visionary using Astro file manager, then run Visionary. I click on "temproot now" and it starts, but then the screen goes black and doesnt do anything. I have let it sit on the black screen for well over 15mins before with no luck. I can click on "attempt to permroot" and it will ask for permissions and reboot and everything. my s=on but I still have root access and 0.86.000 bootloader. this is what I see using terminal before rebooting to see if s=off
Did you do the Radio S=OFF using gfree? If so that would explain why you still have root as security is disabled on the device totally. If thats the case then just push the eng bootloader manually via adb or though terminal and reboot. For now XxKOLOHExX is locked lets see what I find ill post back for him.
PermROOT said:
Did you do the Radio S=OFF using gfree? If so that would explain why you still have root as security is disabled on the device totally. If thats the case then just push the eng bootloader manually via adb or though terminal and reboot. For now XxKOLOHExX is locked lets see what I find ill post back for him.
Click to expand...
Click to collapse
thanks for taking the time to help out, Ill give it a shot
*edit* just tried pushing the eng bootloader through adb and it didnt stick or flash, rebooted into hboot and it still says 0.86.0000, s=on, 26.08.04.30_M3 radio
Alright guys so the bottom 1/5 of my screen stopped responding so I want to return my phone to tmobile and have it replaced.
But ive run into an issue. Sometimes when I go into bootloader it clamis i have s-off other times it tells me its s-on. and when i try to flash older radio so i can revert to stock rom it just says "checking" the image and then throws me back into the bootloader. any ideas on how i can restore to stock? Thanks in advance.
jeet92 said:
Alright guys so the bottom 1/5 of my screen stopped responding so I want to return my phone to tmobile and have it replaced.
But ive run into an issue. Sometimes when I go into bootloader it clamis i have s-off other times it tells me its s-on. and when i try to flash older radio so i can revert to stock rom it just says "checking" the image and then throws me back into the bootloader. any ideas on how i can restore to stock? Thanks in advance.
Click to expand...
Click to collapse
Gonna need more info to troubleshoot. Lets start with how did you root the phone to start and how you unrooted. Are you doing anything different when it shows s-off than when it says s-on?
well i rooted with temp visionary and then gfree. now the trouble is i cant get it back to stock radio. that way i can flash original rom and unroot. I try to flash a new radio and it goes from s-on to s-off and when i batterypull and turn it back on its perfectly fine as s-on
jeet92 said:
well i rooted with temp visionary and then gfree. now the trouble is i cant get it back to stock radio. that way i can flash original rom and unroot. I try to flash a new radio and it goes from s-on to s-off and when i batterypull and turn it back on its perfectly fine as s-on
Click to expand...
Click to collapse
I think you have some terminology mixed up. Are you saying that you flashed an updated radio and then PD15IMG.zip update from hboot? Are you trying to flash the stock rom or are you trying to unroot?
Sent from my HTC Glacier using XDA Premium App