MS2Ginger, 2.3.6 TIM BRASIL-Camera Preview Not Working - Milestone 2 General

I flashed the 2.3.6 TIM Brasil im my device, and they told me in a blog that i could not change to any custom rom anymore, so i thinked it would be a good idea to ask before trying... To install this rom(ms2ginger) i can use only the droid2bootstrap to recover the zip file or i need to follow the downgrade tutorial before?
(Sorry for my poor english...)
Edit:i flashed the ms2 ginger without using the tezet downgrade sbf and it worked!But camera preview is not working!It takes photos but i cannot see the preview... i must reflash the rom again and flash the downgraded sbf?
Sent from my A953 using XDA App

ZakkBR said:
I flashed the 2.3.6 TIM Brasil im my device, and they told me in a blog that i could not change to any custom rom anymore, so i thinked it would be a good idea to ask before trying... To install this rom(ms2ginger) i can use only the droid2bootstrap to recover the zip file or i need to follow the downgrade tutorial before? (i did not have understanted the downgrade tutorial, so if it is needed to use it can anybody explain it to me please?)
(Sorry for my poor english...)
Edit: Since i flashed a full 2.3.6 rom does this mean that i will not have 720p recording in the ms2ginger?
Sent from my A953 using XDA App
Click to expand...
Click to collapse
Actually, as long as you don't update to Vivo 2.3.6 or the Personal 2.3.6 (argentinian carrier), you can go back to Froyo and install any custom rom you want, there's a tutorial in the Android Development section. Sorry I can't help you with ms2ginger, I haven't used it yet.
And why do you say that you'll not have 720p recording? I'm pretty sure it works.

720p is only working on official roms and argen2stone and ms2ginger coz this 2 roms are based on official roms, debloated and deblurred,
Sent from my MotoA953 using XDA App

I already have seem the downgrade tutorial but i wanted to know if i need to downgrade before flashing ms2ginger since it is based on the stock roms but i will try to flash it and see what happens.
PS:i had asked about the camera because in his post walter79 said: "* via greenbreadmod 2.0 and if you never flashed a Android 2.3.6 full sbf" and I got a litlle confused... so thank you by the answer .
Edit:i flashed the ms2 ginger without using the tezet downgrade sbf in the tutorial and it worked!But camera preview is not working!it takes photos but i cannot see the preview... i must reflash the rom again and flash the downgraded sbf?

Related

[Q] Can I flash Defy+ MB526 Firmware on a MB525?

I was wondering if I could flash this (UK version) Defy+ MB526 Firmware on a MB525 (red lens) without any problem?
Could someone be so kind as to share a little knowledge here?
Thanks in advance.
I flashed this full sbf and now no 3g and no market, trying to downgrade, hope to find and answer.
I dont think there is a downgrade after you flash full-sbf. we can only use cm9 and GB kernel roms after that.
TheMayor said:
I flashed this full sbf and now no 3g and no market, trying to downgrade, hope to find and answer.
Click to expand...
Click to collapse
you can not do that. Defy and Defy+ have locked bootloader that wont allow the downgrade. Still there is hope for your phone, your issues are quite solvable. You should root your phone, install baseband switcher for 3g, then install custom recovery and then flash google apps, all of this you can find it in the dev section.
If you ask there I would gladly help
u can flash ms2ginger, argentstone, CM7, CM9 but to install there u must root your phone, custom recovery...

[Q]Defy+ 2.3.5

So i just bought a defy+ and it has 2.3.5. Stupid carrier.
Well, im trying to find which baseband is using but its not listed in the about phone menu. Is there any other way around?
I want to install a custom rom with 720p, but all there are so many different kernels i have no idea which one to use, or if i even need to flash one. My previous phone was a Xperia X8, you just had to unlock BL, flash kernel and flash rom. Here, theres the SBF files , the nandroid stuff. Are you supposed to use both?
If anyone can recommend me a rom thats not MIUI(i need my drawer ok) or ICS, i would appreciated.
Anyway, i need to know the baseband to see if i can try the soft simunlock.
Here is my build number :4.5.2-51_DFL-50 whatever it means.
ps: i already made a backup with cwm of the stock rom and also rooted my phone.
To flash a sbf you have to download RSD Lite and drivers, here u have the steps: http://forum.xda-developers.com/showthread.php?t=966537. Then, install the rom u like from recovery. Here u have all Epsylon and Quarx ICS nightlys (ICS, CM9) http://forum.xda-developers.com/showthread.php?t=1432100. With Defy+ use gb Kernel.
I just have some questions regarding the kernels. If i install the ICS roms and then i want to go back, which kernel i need to flash to be able to restore my phone using the nandroid backup i made.
densets said:
I just have some questions regarding the kernels. If i install the ICS roms and then i want to go back, which kernel i need to flash to be able to restore my phone using the nandroid backup i made.
Click to expand...
Click to collapse
None, because when you are doing full backup a copy of a kernel is included.
Then im going to update CWM, make a new backup just in case and start to play a around a bit.
Thanks for the help ^^
ps: is there anything wrong with 2.3.5? just asking because i hardly see any posts related to this android version
densets said:
Then im going to update CWM, make a new backup just in case and start to play a around a bit.
Thanks for the help ^^
ps: is there anything wrong with 2.3.5? just asking because i hardly see any posts related to this android version
Click to expand...
Click to collapse
2.3.5 is perfectly fine! It's what I use as a base for both CM7.2 and CM9 builds for Gingerbread and it's great! It's rootable and you can even flash down to Froyo if you wish so, there's a special version 6 Froyo sbf in the forums.
If you have any doubts or if anything confuses you, please do ask before trying, that will save you both time and nerves
Full 2.3.5 sbf that I use: http://sbf.droid-developers.org/umt...22_A022_M002_HWp3_WIG148094_Service1FF.sbf.gz
*EDIT* Just read the whole first post You can use Quarx's CM7.2 and CM9 defy+ nightlies on your phone without flashing anything else but the ROM zip and gapps zip (optional, as you know). Both available here - http://quarx2k.ru/
i have one more question regard the defy+,
If i flash the cm7.2 or cm9 builds by Quarx and want to go back, i just need to restore the backup i made with cwm right? or do i really need to get the sbf from my carrier?
is there any difference(flashing a sbf or restoring form nandroid. Not in procedure but in the final result)?
densets said:
i have one more question regard the defy+,
If i flash the cm7.2 or cm9 builds by Quarx and want to go back, i just need to restore the backup i made with cwm right? or do i really need to get the sbf from my carrier?
is there any difference(flashing a sbf or restoring form nandroid. Not in procedure but in the final result)?
Click to expand...
Click to collapse
Yep restoring the backup will suffice but if you want to get back your warranty you need to uninstall CWM and any other root apps and unroot your phone. That won't leave any trace of root.
Following are some main differences in flashing nandroid and SBF:
1.) Nandroid backup restores your phone to exact state as it was during backup. SBF gives you back exactly how your phone was when you purchased it. Thus, you still have root and CWM after nandroid whereas your phone is clean as new after SBF(recomended to claim warranty).
2.) SBF flashes almost everything except data partition! Nandroid flashes even the data partition..
Thanks for the help, ill use nandroid until i get back. Besides cwm is easy to remove.
^^
I have a question, I have a stock defy (Bayer, according logcat)..
The android version that it has is 2.2.1 and build version is 3.4.2-107_JDNL-9..
Once I root it and install CWM, can I just flash any rom, like the one you link above or I need to use RSD lite for something before?
I'm sorry for the noob questions but never had a motorola before, always nexus line which has unlocked bootloader..
Sent from my MB525 using Tapatalk
JakeOcn said:
I have a question, I have a stock defy (Bayer, according logcat)..
The android version that it has is 2.2.1 and build version is 3.4.2-107_JDNL-9..
Once I root it and install CWM, can I just flash any rom, like the one you link above or I need to use RSD lite for something before?
I'm sorry for the noob questions but never had a motorola before, always nexus line which has unlocked bootloader..
Sent from my MB525 using Tapatalk
Click to expand...
Click to collapse
Yep once you have CWM you can go on with flashing ROMs with ease. You need RSD lite and SBBF only if you soft brick your phone(Very hard!) or want to go back to stock to claim warranty.
Thank you for your help
Sent from my MB525 using Tapatalk

[Q] Defy Green - Blur_Version.2.5.1.1.MB525.Retail rooted and now?

Hi guys,
I am quite new on this mobile phone upgrades. I made same read in the forum about the upgrade process rooting & flashing but I still not sure of the next step after rooting.
Can anyone advice me about what is the best SBF to flash the phone? Where can I find it?
Any thing extra I need to take in consideration?
Cheers
You should not flash full .sbf instead the same as your stock rom or lastest official version via rsd lite !!!!!!!!!
Install 2nd init and use CWM recovery to flash a new rom an all the other stuff
Ms2Ginger is fine ICS is fine
Sent from my MB526 using XDA App

[Q] Defy mb525 - Don't know my CG version / What room to flash?

I bought a used defy that had already been flashed and i don't like the rom.
The idea was to downgrade it to its original rom or change to another one directly.
But i couldn't find my CG version, how do i find it?
I have a green defy, which rom can i flash?
Can i do it directly or i have to do the downgrade?
My phone:
- android version: 2.3.7
- System version: MIUI-203160
Thx!
Since you have MIUI I think you got Gingerbread kernal
Sent from my MB525 using XDA
u have froyo kernel as miui is based on froyo kernel(i think)
ur boot loader cg version should be 4...
Sent from my MB526 using xda premium
Thank you all for answering!
But, i'd like to know if i should do the downgrade or flash other rom directly?
And, what rom should i flash?
Try to flash a Froyo, maybe a deblurred one... If it works, you have a cg4 bootloader. If not, you have a newer bootloader and downgrade is more difficult.
After flashing Froyo, i advise to install CM7. Maybe you like that.

[Q] Downgrade & Bootloader ?

Hi,
I have seen soo many BL7 and Bootloader posts for Defy & Defy+, do these bootloaders in anyway assist Defy users using 4.5.1-134 Orange GB Blur or 4.5.1-128 Orange GB Blur(Android 2.3.4 "Gingerbread" !!BETA!!), downgrade to ANY Froyo sbf ?
What is the use of having BL7 or is it only for Defy+ users to use custom roms ?, I'm confused please help... :S
Thanks,
Scan
scan06disk said:
Hi,
I have seen soo many BL7 and Bootloader posts for Defy & Defy+, do these bootloaders in anyway assist Defy users using 4.5.1-134 Orange GB Blur or 4.5.1-128 Orange GB Blur(Android 2.3.4 "Gingerbread" !!BETA!!), downgrade to ANY Froyo sbf ?
What is the use of having BL7 or is it only for Defy+ users ?, I'm confused... :S
Thanks,
Scan
Click to expand...
Click to collapse
You got it a little wrong. BL7 doesn't assist in using any ROM. BL7(BootLoader 7) is referred to stock Gingerbread (2.3.6) SBF's from Motorola (for Defy+) which have been signed as version 7. If you have a BL7 ROM on your device (either a stock or flashed one), You CANNOT Downgrade to anything, and will be stuck at 2.3.6
neo.ank said:
If you have a BL7 ROM on your device (either a stock or flashed one), You CANNOT Downgrade to anything, and will be stuck at 2.3.6
Click to expand...
Click to collapse
Oh ok I think I got it...!, so basically since I'm still on 2.3.4 I can play with all those custom roms, than those stuck on 2.3.6 who until now had nothing because BL was locked to stock rom and wouldn't allow a custom rom to run ?
Good thing i didn't flash 2.3.6... lol
THAAAANKS NEO.ank !!!
scan06disk said:
Oh ok I think I got it...!, so basically since I'm still on 2.3.4 I can play with all those custom roms, than those stuck on 2.3.6 who until now had nothing because BL was locked to stock rom and wouldn't allow a custom rom to run ?
Good thing i didn't flash 2.3.6... lol
THAAAANKS NEO.ank !!!
Click to expand...
Click to collapse
The root methods for previous versions do not work with BL7.Though its rootable, still it cannot downgrade so the custom ROMs for froyo kernel won't work.
Sent from my Defy+ using Tapatalk 2

Categories

Resources