Related
OK... ive taken the plunge and downgraded from 3.1 back to 3.0
Force closes everywhere ...acore ???
anyway ... ive now Rooted and want to install Prime. Tried going into recovery (power and vol down) and i only got an option to wipe the storage ??
Am i doing something wrong or has my CWM not installed correctly ? Ive been used to flashing my HTC Desire and that was all menu driven from Power and Vol -.
Can anyone advise please ?
EDIT - ignore/delete .... i held vol- too long oops...
wilbur-force said:
OK... ive taken the plunge and downgraded from 3.1 back to 3.0
Force closes everywhere ...acore ???
anyway ... ive now Rooted and want to install Prime. Tried going into recovery (power and vol down) and i only got an option to wipe the storage ??
Am i doing something wrong or has my CWM not installed correctly ? Ive been used to flashing my HTC Desire and that was all menu driven from Power and Vol -.
Can anyone advise please ?
EDIT - ignore/delete .... i held vol- too long oops...
Click to expand...
Click to collapse
It used to be a trial to get into recovery. Once you flash Prime flash the power recovery mod...makes it easy
hi guys.i have a big problem but i don't understand how i solve this.i upgraded 2.3 official bete.after i wanted to downgrade but setup is failed.i opened the phone but it isn't.only huawei's logo is coming and shotdowned.i can't enter recovery.and when i press volume up+down and power,phone beginning setup and failed again.
Please,Help me.
(sorry my bad English)
Downgrade from 2.3 to 2.2 is not possible for the time being if you don`t have a back up of previously used rom and we also don`t have a fully working recovery on 2.3 so we must wait for it.
I downgraded from 2.3 to 2.2 without problems twice. I put update.app from 2.2-zip in dload-folder of internal sdcard, poweroff, vol-down + vol-up + power until screen says unpacking. Let it finish then boot to recovery (vol-up + power), factory reset and format cache, clear dalvik cache if you can. Reflash update then your phone should boot normally with stock 2.2
Sent from my u8800 using XDA App
http://forum.xda-developers.com/showthread.php?p=20263421
You just need 2.2 boot partition stuff. There might be already links in that thread, or I can send them tomorrow, not on my comp now.
edit: looks like you don't need even the boot stuff good to know.
Sent from my u8800 using xda premium
HFZenon said:
I downgraded from 2.3 to 2.2 without problems twice. I put update.app from 2.2-zip in dload-folder of internal sdcard, poweroff, vol-down + vol-up + power until screen says unpacking. Let it finish then boot to recovery (vol-up + power), factory reset and format cache, clear dalvik cache if you can. Reflash update then your phone should boot normally with stock 2.2
Sent from my u8800 using XDA App
Click to expand...
Click to collapse
No,My problem is diffirent.Update failed and not finished.when i press volume+ and power phone isn's work.I need to reach to the internal sd but how?
dikerow said:
No,My problem is diffirent.Update failed and not finished.when i press volume+ and power phone isn's work.I need to reach to the internal sd but how?
Click to expand...
Click to collapse
Vol up + Vol down + power should get you in the pink screen (bootloader). Then if you connect it via USB, all the partitions are mounted on PC.
edit: do you have the update stuff on the sd? Ofcourse Then I think the only way is an external sd to get to the pink screen.
Sent from my u8800 using xda premium
ksatta said:
Vol up + Vol down + power should get you in the pink screen (bootloader). Then if you connect it via USB, all the partitions are mounted on PC.
edit: do you have the update stuff on the sd? Ofcourse Then I think the only way is an external sd to get to the pink screen.
Sent from my u8800 using xda premium
Click to expand...
Click to collapse
i press volume up + power but not open recovey
dikerow said:
i press volume up + power but not open recovey
Click to expand...
Click to collapse
You need an external sd without update stuff, then vol down + Vol up + power. In the pink screen you can for example try to copy the update.app again etc etc
Sent from my u8800 using xda premium
ksatta said:
You need an external sd without update stuff, then vol down + Vol up + power. In the pink screen you can for example try to copy the update.app again etc etc
Sent from my u8800 using xda premium
Click to expand...
Click to collapse
thanks for answers now i can enter pink screen.what can i do after this?
Try this:
Download this file and extract the contents.
When in pink screen mode, connect your phone to your computer.
Copy the 4 files from the downloaded zip to a folder named "image" on your phone (folder should already be there, ).
Pull battery on phone, reinsert the battery and try booting to recovery (vol-up + power).
hI, how can I access my internal sdcard if I cant install none of recoverys avaliable, even with Image folder all from 2.2, none. Im stuck. Update from ext sd card dont work it failed. I need to put dload folder in internal sd. please help... =(
MaRcIuPT said:
hI, how can I access my internal sdcard if I cant install none of recoverys avaliable, even with Image folder all from 2.2, none. Im stuck. Update from ext sd card dont work it failed. I need to put dload folder in internal sd. please help... =(
Click to expand...
Click to collapse
The internal SD is mounted on the PC in the pink screen (vol down + vol up + power). To get to the pink screen put an external SD without dload folder.
HFZenon said:
Try this:
Download this file and extract the contents.
When in pink screen mode, connect your phone to your computer.
Copy the 4 files from the downloaded zip to a folder named "image" on your phone (folder should already be there, ).
Pull battery on phone, reinsert the battery and try booting to recovery (vol-up + power).
Click to expand...
Click to collapse
The files in that link are the original ones from 2.2 folder image?
internal sd card in pink screen?? in pink screen you only get a 240Mb partition for Image.
MaRcIuPT said:
internal sd card in pink screen?? in pink screen you only get a 240Mb partition for Image.
Click to expand...
Click to collapse
Yeah that's the boot partition, but it should also mount the internal SD. I haven't tested in Windows, but the internal SD is also FAT32 I think, so it should mount.
Anyway in Linux with the pink screen I see the phone's whole internal flash (14 partitions).. partition 14 is the internal SD.
yeah but in windows it shows only this... I'm screwed
MaRcIuPT said:
yeah but in windows it shows only this... I'm screwed
Click to expand...
Click to collapse
Well, you could boot Ubuntu Live CD from USB-stick / CD to get it working.
thanks a lot, worked like a charm. I was able to install 2.2 b136.
what do you recommend to install miui? I tried so many ways. lol
(my miui backups were made after I installed official b162 and then installed CWM v4 )
NihilistWarGod said:
The files in that link are the original ones from 2.2 folder image?
Click to expand...
Click to collapse
Um, i think so, files are backup from my phone before i tried 2.3beta1v1. Might be cwm recovery though...
Sent from my u8800 using XDA App
MaRcIuPT said:
thanks a lot, worked like a charm. I was able to install 2.2 b136.
what do you recommend to install miui? I tried so many ways. lol
(my miui backups were made after I installed official b162 and then installed CWM v4 )
Click to expand...
Click to collapse
Restoring pre/post beta1 v2 backups is a bit tricky. I personally just installed a clean cm7 from geno's zip. Now I'm trying to get CM7 to work without the need to downgrade to 2.2 first, with the new 5.0.2.7 recovery from geno (the thread title says U8800pro, but it works for also u8800).
Edit: so in conclusion, you should get miui working fine by using a recovery that works, and then installing miui from the original zip, not from your own backup. You also need to downgrade to 2.2, but you're running 2.2 now already?
hi 2 all
I want to brief how made brick my tab step by step
first of all i had an Acer_A500_4.010.43_COM_GEN1 3.1 stock rom on my tab that i upgrade it to 3.2 Acer_A500_7.006.01_COM_GEN1 by tablet then i decided to root my tablet for installation custom rom and i downgrade to 3.01 rom by this typic http://forum.xda-developers.com/showthread.php?t=1276227 method 1 i reverted successfully and after rooting i installed and tested this 3 roms (taboonay 2.2-thor 14.2&light speed 1.07) but each one had some problems like google map or gps or rotation screen so i installed a 3.1hc stock rom Acer_A500_4.010.41_COM_GEN1 and rooted that worked good but i had mistake and i forget erase update.zip file from my sd card
4days ago Mistakenly I turn on my tablet with recovery mode and iconia automattically gone to update mode (rom installation) i did nothing but this opration was stopped at 80% and my wrong was here i could not be patient and shut down my tab by power button and i bricked my tablet
after that i test all method for unbrick it like not stable rom , Chinese and whitout Chinese roms using of stock rom like Acer_A500_4.010.38_COM_GEN1
without any success only in not stable rom processes gone to 95 % and then stoped and nothing
after update to chinese rom it stopped at 30 % with yellow triangle sign
and then happend something bad and i loose my CWM
NOW if i want to go to recovery mode by pressing power+vol down keys Iconia show me a message
secure boot: image SOS checksum fail!
and in normal booting I have a locked black screen with nonworking touchables button and android word at left top of screen and clock & 15% battery sometimes it show a message for shutting down
i cant go to setting menu for active my usb debugging and my pc do not recognize my tablet
i cant hard reset my tab because it hanged in 2 message for 30 mins and i cant go to recovery mode and customer services says your device is out of warranty because rotting that
but Fortunately I have my UID
excuse me for long story
any body help me please
thank all of you
that is amazing over 150 visit of this help request without any answer please give me a Proposal
thanks
I have a501 .....
http://forum.xda-developers.com/showthread.php?t=1419164
the chinese rom and checksum error are supposed to happen.
the chines rom is an old unstable version but is provided so we can root it to install cwm and flash a working rom.
after the checksum error you needed to power off and then using the buttons enter recovery mode and go to 'Fix checksum error' in advanced menu - after that reboot.
you should do the following:
a)go back and read the entire post on what to do because you missed the last part
or
b)try the backdoor method
---------- Post added at 12:21 PM ---------- Previous post was at 11:49 AM ----------
just read your entire post again...there's alot going on there isnt there?
have you tried flashing the update.zip again with 3.0.1 on it...get back to the chinese rom, from there install iconia root and root it. Then install cwm and you should be all good - if that doesnt work then use timmyDeans backdoor method it does it for you, all you need to do is install acer recovery installer to install cwm, backup the original stock recovery when the app asks you, you will need it to OTA Update successfully...
Doesn't flashing stock rom remove cwm?
bendystrawboy said:
Doesn't flashing stock rom remove cwm?
Click to expand...
Click to collapse
yeh i just had trouble when i OTA'd last nite on the 2nd update, had to flash stock before it would install, but i may have restored the wrong one from acer recovery installer beforehand...a definite possibility!!!
by flashing from method 1 my racovery mode came back again and i can recover only from update.zip
but when i want to install Extract_unBrick_UPDATE it stop at 30% and my tab goes to turn off and when i press power button it turnnig on and turn off very soon and can not boot
I test non stable rom and flash with this rom proccess goes to 90% and stop
what can i do now? this is my tablet screen
http://s1.picofile.com/file/7237922040/Photo_0007.jpg
http://s2.picofile.com/file/7237923010/Photo_0008.jpg
http://s1.picofile.com/file/7237924301/Photo_0009.jpg
thank u
darvis said:
by flashing from method 1 my racovery mode came back again and i can recover only from update.zip
but when i want to install Extract_unBrick_UPDATE it stop at 30% and my tab goes to turn off and when i press power button it turnnig on and turn off very soon and can not boot
I test non stable rom and flash with this rom proccess goes to 90% and stop
what can i do now? this is my tablet screen
http://s1.picofile.com/file/7237922040/Photo_0007.jpg
http://s2.picofile.com/file/7237923010/Photo_0008.jpg
http://s1.picofile.com/file/7237924301/Photo_0009.jpg
thank u
Click to expand...
Click to collapse
Unbrick it using my tool listed here, guarantee you it will fix your problems.
Just download it and follow the instructions in the readme.pdf.
http://forum.xda-developers.com/showpost.php?p=20680452&postcount=137
timmyDean said:
Unbrick it using my tool listed here, guarantee you it will fix your problems.
Just download it and follow the instructions in the readme.pdf.
http://forum.xda-developers.com/showpost.php?p=20680452&postcount=137
Click to expand...
Click to collapse
hello master
i am so glad for your attention to my problem
i use from your rom before that pictures are shown above and my tablet show ((pass)) and pc show congratulation to me but u see nothing change but Hopefully that fix my cvm problem an now ican use from update.zip rom but my screen didn't any change and i cant do anything by tablet
I don't know anything about backdoor method is it useful for my problem ?
i have 2 problems
1-i cant wipe and erase my whole data even when i press vol+ and power keys and toggle lock screen button it shown two message for erasing cash but it do anything
2-my PC don't recognize my tablet i have to flash your rom with APX mode
i have a question do your rom need to CUPID file ? because there isn't any cupid file in your Rom
please help me sir because you are a greet master
thanks
darvis said:
hello master
i am so glad for your attention to my problem
i use from your rom before that pictures are shown above and my tablet show ((pass)) and pc show congratulation to me but u see nothing change but Hopefully that fix my cvm problem an now ican use from update.zip rom but my screen didn't any change and i cant do anything by tablet
I don't know anything about backdoor method is it useful for my problem ?
i have 2 problems
1-i cant wipe and erase my whole data even when i press vol+ and power keys and toggle lock screen button it shown two message for erasing cash but it do anything
2-my PC don't recognize my tablet i have to flash your rom with APX mode
i have a question do your rom need to CUPID file ? because there isn't any cupid file in your Rom
please help me sir because you are a greet master
thanks
Click to expand...
Click to collapse
V3 which I pointed you to is STOCK 3.2.1 with root. Once you get there you will be stable. If you want CWM then you will have to install it. It is NOT in the flash because the flash is stock ONLY with root. But since you have root, you can install CWM.
The serial number does NOT need to be saved in any file. Just follow the instructions.
timmyDean said:
V3 which I pointed you to is STOCK 3.2.1 with root. Once you get there you will be stable. If you want CWM then you will have to install it. It is NOT in the flash because the flash is stock ONLY with root. But since you have root, you can install CWM.
The serial number does NOT need to be saved in any file. Just follow the instructions.
Click to expand...
Click to collapse
sorry sir
I used your v3 rom and install it by apx mode it installed and I saw ((pass)) on my tablet after botting and after acer logo and android word i have same problem yet
http://s1.picofile.com/file/7238522040/Photo_0010.jpg
http://s2.picofile.com/file/7238522903/Photo_0011.jpg
http://s1.picofile.com/file/7238523331/Photo_0012.jpg
however thank you very much for your attention
sincerely yours
darvis said:
sorry sir
I used your v3 rom and install it by apx mode it installed and I saw ((pass)) on my tablet after botting and after acer logo and android word i have same problem yet
http://s1.picofile.com/file/7238522040/Photo_0010.jpg
http://s2.picofile.com/file/7238522903/Photo_0011.jpg
http://s1.picofile.com/file/7238523331/Photo_0012.jpg
however thank you very much for your attention
sincerely yours
Click to expand...
Click to collapse
Ok, now just download the stock image for your country and put it on your external sdcard. Use the power and volume + key which will launch stock recovery (which you now have flashed) and it will flash your tablet with the one located on your sdcard. This will have you back stock.
timmyDean said:
Ok, now just download the stock image for your country and put it on your external sdcard. Use the power and volume + key which will launch stock recovery (which you now have flashed) and it will flash your tablet with the one located on your sdcard. This will have you back stock.
Click to expand...
Click to collapse
sorry sir
what did you mean about power and volume + key?
do you mean power and vol down keys for recovery mode?
darvis said:
sorry sir
what did you mean about power and volume + key?
do you mean power and vol down keys for recovery mode?
Click to expand...
Click to collapse
You have a "volume" switch on top of your tab (long silver switch on left side)
You control volume from this. Vol+ make sound go up (the right side of it)
Press it on the left side, and volume goes quiet (vol-)
So, as he said, with the tablet OFF, hold the VOL+ side of the button, then select PWR (power)
You have 2 recovery modes.
1. CWM Recovery (vol- & Pwr) (after you have root and cwm installed)
2. Stock Acer recovery (vol+ & Pwr)
Step number 2 with the stock acer recovery, should install the stock rom you copied to your sd like TimmyDean said earlier.
Moscow Desire said:
You have a "volume" switch on top of your tab (long silver switch on left side)
You control volume from this. Vol+ make sound go up (the right side of it)
Press it on the left side, and volume goes quiet (vol-)
So, as he said, with the tablet OFF, hold the VOL+ side of the button, then select PWR (power)
You have 2 recovery modes.
1. CWM Recovery (vol- & Pwr) (after you have root and cwm installed)
2. Stock Acer recovery (vol+ & Pwr)
thanks a lot
Step number 2 with the stock acer recovery, should install the stock rom you copied to your sd like TimmyDean said earlier.
Click to expand...
Click to collapse
thank u sir
but there is a question
1-in CWM recovery we can use from Update.zip files
but in Stock Acer recovery (vol+&power ) which one of files must be copied at sd card ?
darvis said:
thank u sir
but there is a question
1-in CWM recovery we can use from Update.zip files
but in Stock Acer recovery (vol+&power ) which one of files must be copied at sd card ?
Click to expand...
Click to collapse
Answer me please
darvis said:
Answer me please
Click to expand...
Click to collapse
Please rewrite what you are trying to do. I have no idea what you are talking about?
Are you asking about stock recovery and flashing form a SD Card? If so, copy update.zip to your SD card and then run recovery. If you have CWM, then use it to select the update from the SD Card.
It's not clearly as to exactly what you have loaded and what you are trying to do?
LASTLY: You cannot take a backup from CWM and have the stock recovery install it. Stock recovery will only install update.zip which must be signed by ACER.
TD
timmyDean said:
Please rewrite what you are trying to do. I have no idea what you are talking about?
Are you asking about stock recovery and flashing form a SD Card? If so, copy update.zip to your SD card and then run recovery. If you have CWM, then use it to select the update from the SD Card.
It's not clearly as to exactly what you have loaded and what you are trying to do?
LASTLY: You cannot take a backup from CWM and have the stock recovery install it. Stock recovery will only install update.zip which must be signed by ACER.
TD
Click to expand...
Click to collapse
Hello sir
in upper post u tell me i must go to recover mode by pressing power & vol+
but only i can go to stock recovery with pressing power & vol-(not vol+)
is there any other method for going to recovery mode by (vol+) ?
because Mr Moscow Desire said in his upper post (post no 14 of this thread)
if yes how ?
if not ..... just thank u
there is only one recovery on your device..
you should slowly repost your exact trouble.. then do EXACTLY as someone tell you to fix it..
There is only one recovery on your device . If YOU FLASH CWM RECOVERY .. it overrides the acer recovery.
so if you dont have cwm revovery .
nevermind repost your system rom you are using .. rather or not you know what recovery you have .. Then someone can help you...
LOST BLONDE BABE I AM .. GIGGLES
gOOD LUCK..
Sorry you're having difficulty.
Please go here and download the is tool http://forum.xda-developers.com/showthread.php?t=1307539
Do EXACTLY what it says to do in the PDF
Hello, Guys, Its my first post here, so i allready sorry for my bad English.
I have a big problem with my phone, the this is that when i try to turn it on huawei logo appears and after ~5 seconds it dissapears and nothing happens, phone just turns off. I also cant get acces to CMW. Al i can do is to go to pink screen mode. I also tyed to put dload folder with updates to sdhc card, but when i am trying to load i with 3 buttons combination (VOL +- + power on button), pink screen appears... What should i do in this situation? Maybe anyone had faced this problem, and how have you solved it?
Again sorry for my poor English , and thanks for your help
Matoxas said:
(VOL +, + power on button),
Click to expand...
Click to collapse
VOL + and power on button
I tryed that. It doesnt help. Huawei logo apears and after few seconds dissapears...
Tried putting out battery and start via USB?
Sent from my U8800
Yes. No effect
I had the same expirience, when I flashed u8800 PRO "dload" on my u8800. I took it to the warranty, acted like I'm dumb and they replaced the motherboard.
If it does not respond by putting "dload" folder on the sdcard and pressing all the (three) buttons, I am deeply sorry for your loss, if you dont have it under warranty.
If you have tried this more then 2 times, your recovery file is gone and your system files corrupted.And there isn't enough space for new rom.
I don't know it is working or not, but xmsnx tried it on his u8800 (not pro) and managed backing up the phone.
xmsnx said:
Yes!!!! My phone works"!!!!!!!
---------- Post added at 11:21 PM ---------- Previous post was at 11:05 PM ----------
Ok here's what I did
Download http://mediafire.com/?1hbk6n46hgamyt6
Unzip it, and find UPDATE.APP
Put UPDATE.APP in a dload folder and upload to empty sdcard.
Put sdcard in phone, and hold vol+/- and power and flash it.
After phone has restarted pull battery.
Download http://www.mediafire.com/?6hrfz36b8e2vw87
Unzip and copy the dload folder to empty sdcard.
Hold vol+/- and power and flash it.
After it fails near the end or if it restarts then pull battery.
Download a rooted boot.img and a clockworkmod recovery.img (got both mine from links at modaco)
Attach phone to PC in pink screen mode and delete the boot.img and recover.img files.
Upload the downloaded root.img and recovery.img to image folder in phone.
Download any custom rom from XDA, I used http://forum.xda-developers.com/showthread.php?t=1475687 and upload it to sdcard
Pull battery.
Hold vol+ and power and go into clockworkmod, wipe everything and flash the custom rom!!
Good luck!
Click to expand...
Click to collapse
Moved To Q&A
Please post all questions in the Q&A section
Maybe you should try again using a sd card with the dload folder without the battery?
I also had the same problem and almost lost all hope, but in the 10th time I tried it worked! Don't know why, just came back from the dead.
PS: I am looking for a broken ideos to replace the back casing. If you dont succeed, maybe you could pm me to buy your phone
Assistance
hello i need the download for the 2 link i want to try this on my phone its briked
You can also try this: http://forum.xda-developers.com/showthread.php?t=1694914&page=2
It helped me to deal with the same problem on regular X5.
I have decided to upgrade my Huawei U8800Pro stock ICS 4.0.3 to CyanogenMod 10.2 JB 4.3.
Quickly I realized that this is easily said than done. Tutorials I have found on the Internet are not good. They lead me to brick my phone twice during this process, so I've decided to share my experience with community. Here are step by step instructions:
Prerequisites:
I didn't bother to write any hyper-links, because they will probably be dead by the time you read this. Instead I wrote name of the files you can search in google.
Root_u8800pro.zip containing unlockbootloader_u8800pro.exe
AndroidHandsetUsbDriver_v1.zip containing DriverSetup.exe
gapps-jb-20130813-signed.zip
cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip (here the ROM thread: http://forum.xda-developers.com/showthread.php?t=2409681)
recovery6.0.3.3.img (I recomend non touch version)
HUAWEI_U8800P_Android_2.3_V100R001C00B521_Oversea_Normal_05010TXB.zip, containing dload folder (link)
404029_4.0_BasebandCWM.zip
When you have all those in place, you can start with procedure:
Install USB drivers for your phone. Run DriverSetup.exe
Connect your phone to USB and wait to get detected. Then run unlockbootloader_u8800pro.exe (chose first button and wait).
Optionaly download Root Checker from Google Play to see if your phone was rooted. You can skip this step.
Copy dload folder to root of your SD card
Unplug USB cable and turn phone off
Press Volume up + Volume down + Power on at the same time. Hold them till you see that your phone started with firmware update procedure. Wait for procedure to finish. Now you should have stock GB 2.3 rom on your phone.
Turn off your phone
Press Volume up + Volume down + Power on at the same time, and wait till you see pink screen
Connect USB cable and wait till Windows detect your phone and show you image folder. Go to that folder and backup original recovery.img.
Copy recovery6.0.3.3.img to image folder and rename it to recovery.img
Turn off your phone
Press Volume up + Power on at the same time and hold till you see recovery console
Chose factory reset
Chose clear cache
Chose advanced/clear dalvik cache
Flash 404029_4.0_BasebandCWM.zip
Flash cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip
Flash gapps-jb-20130813-signed.zip
Reboot your phone
Wait till setup wizard of CynogenMod apears
If all went well you should have CyanogenMod upp and running on your phone.
I'm not responsible If you brick your phone. I did it twice before I finally succeeded :laugh:.
How to unbrick u8800pro:
You can always get back to good old Android 2.3 folowing this procedure:
Copy dload folder from HUAWEI_U8800P_Android_2.3_V100R001C00B521_Oversea_ Normal_05010TXB.zip to the root of your SD card
Turn off your phone
Hold down Volume up + Volume down + Power on and let firmware update do it's job
List of useful key combinations:
Assuming your phone is turned off.
Go to pink screen Volume up + Volume down + Power on
Go to recovery console Volume up + Power on
thanks, dude!
but no link found for cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip
sad?!!!
mayank88288 said:
thanks, dude!
but no link found for cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip
sad?!!!
Click to expand...
Click to collapse
You can find link in this thread:
http://forum.xda-developers.com/showthread.php?t=2409681
Good guide
Sent from my U8800Pro using XDA Premium 4 mobile app
sajmons said:
I have decided to upgrade my Huawei U8800Pro stock ICS 4.0.3 to CyanogenMod 10.2 JB 4.3.
Quickly I realized that this is easily said than done. Tutorials I have found on the Internet are not good. They lead me to brick my phone twice during this process, so I've decided to share my experience with community. Here are step by step instructions:
Prerequisites:
I didn't bother to write any hyper-links, because they will probably be dead by the time you read this. Instead I wrote name of the files you can search in google.
Root_u8800pro.zip containing unlockbootloader_u8800pro.exe
AndroidHandsetUsbDriver_v1.zip containing DriverSetup.exe
gapps-jb-20130813-signed.zip
cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip (here the ROM thread: http://forum.xda-developers.com/showthread.php?t=2409681)
recovery6.0.3.3.img (I recomend non touch version)
HUAWEI_U8800P_Android_2.3_V100R001C00B521_Oversea_Normal_05010TXB.zip, containing dload folder (link)
404029_4.0_BasebandCWM.zip
When you have all those in place, you can start with procedure:
Install USB drivers for your phone. Run DriverSetup.exe
Connect your phone to USB and wait to get detected. Then run unlockbootloader_u8800pro.exe (chose first button and wait).
Optionaly download Root Checker from Google Play to see if your phone was rooted. You can skip this step.
Copy dload folder to root of your SD card
Unplug USB cable and turn phone off
Press Volume up + Volume down + Power on at the same time. Hold them till you see that your phone started with firmware update procedure. Wait for procedure to finish. Now you should have stock GB 2.3 rom on your phone.
Turn off your phone
Press Volume up + Volume down + Power on at the same time, and wait till you see pink screen
Connect USB cable and wait till Windows detect your phone and show you image folder. Go to that folder and backup original recovery.img.
Copy recovery6.0.3.3.img to image folder and rename it to recovery.img
Turn off your phone
Press Volume up + Power on at the same time and hold till you see recovery console
Chose factory reset
Chose clear cache
Chose advanced/clear dalvik cache
Flash 404029_4.0_BasebandCWM.zip
Flash cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip
Flash gapps-jb-20130813-signed.zip
Reboot your phone
Wait till setup wizard of CynogenMod apears
If all went well you should have CyanogenMod upp and running on your phone.
I'm not responsible If you brick your phone. I did it twice before I finally succeeded :laugh:.
How to unbrick u8800pro:
You can always get back to good old Android 2.3 folowing this procedure:
Copy dload folder from HUAWEI_U8800P_Android_2.3_V100R001C00B521_Oversea_ Normal_05010TXB.zip to the root of your SD card
Turn off your phone
Hold down Volume up + Volume down + Power on and let firmware update do it's job
List of useful key combinations:
Assuming your phone is turned off.
Go to pink screen Volume up + Volume down + Power on
Go to recovery console Volume up + Power on
Click to expand...
Click to collapse
i'm using u8800 pro.i installed CM10.2.but wifi is not working on my phone and gapps also not working.....pls help.....