hi guys.i have a big problem but i don't understand how i solve this.i upgraded 2.3 official bete.after i wanted to downgrade but setup is failed.i opened the phone but it isn't.only huawei's logo is coming and shotdowned.i can't enter recovery.and when i press volume up+down and power,phone beginning setup and failed again.
Please,Help me.
(sorry my bad English)
Downgrade from 2.3 to 2.2 is not possible for the time being if you don`t have a back up of previously used rom and we also don`t have a fully working recovery on 2.3 so we must wait for it.
I downgraded from 2.3 to 2.2 without problems twice. I put update.app from 2.2-zip in dload-folder of internal sdcard, poweroff, vol-down + vol-up + power until screen says unpacking. Let it finish then boot to recovery (vol-up + power), factory reset and format cache, clear dalvik cache if you can. Reflash update then your phone should boot normally with stock 2.2
Sent from my u8800 using XDA App
http://forum.xda-developers.com/showthread.php?p=20263421
You just need 2.2 boot partition stuff. There might be already links in that thread, or I can send them tomorrow, not on my comp now.
edit: looks like you don't need even the boot stuff good to know.
Sent from my u8800 using xda premium
HFZenon said:
I downgraded from 2.3 to 2.2 without problems twice. I put update.app from 2.2-zip in dload-folder of internal sdcard, poweroff, vol-down + vol-up + power until screen says unpacking. Let it finish then boot to recovery (vol-up + power), factory reset and format cache, clear dalvik cache if you can. Reflash update then your phone should boot normally with stock 2.2
Sent from my u8800 using XDA App
Click to expand...
Click to collapse
No,My problem is diffirent.Update failed and not finished.when i press volume+ and power phone isn's work.I need to reach to the internal sd but how?
dikerow said:
No,My problem is diffirent.Update failed and not finished.when i press volume+ and power phone isn's work.I need to reach to the internal sd but how?
Click to expand...
Click to collapse
Vol up + Vol down + power should get you in the pink screen (bootloader). Then if you connect it via USB, all the partitions are mounted on PC.
edit: do you have the update stuff on the sd? Ofcourse Then I think the only way is an external sd to get to the pink screen.
Sent from my u8800 using xda premium
ksatta said:
Vol up + Vol down + power should get you in the pink screen (bootloader). Then if you connect it via USB, all the partitions are mounted on PC.
edit: do you have the update stuff on the sd? Ofcourse Then I think the only way is an external sd to get to the pink screen.
Sent from my u8800 using xda premium
Click to expand...
Click to collapse
i press volume up + power but not open recovey
dikerow said:
i press volume up + power but not open recovey
Click to expand...
Click to collapse
You need an external sd without update stuff, then vol down + Vol up + power. In the pink screen you can for example try to copy the update.app again etc etc
Sent from my u8800 using xda premium
ksatta said:
You need an external sd without update stuff, then vol down + Vol up + power. In the pink screen you can for example try to copy the update.app again etc etc
Sent from my u8800 using xda premium
Click to expand...
Click to collapse
thanks for answers now i can enter pink screen.what can i do after this?
Try this:
Download this file and extract the contents.
When in pink screen mode, connect your phone to your computer.
Copy the 4 files from the downloaded zip to a folder named "image" on your phone (folder should already be there, ).
Pull battery on phone, reinsert the battery and try booting to recovery (vol-up + power).
hI, how can I access my internal sdcard if I cant install none of recoverys avaliable, even with Image folder all from 2.2, none. Im stuck. Update from ext sd card dont work it failed. I need to put dload folder in internal sd. please help... =(
MaRcIuPT said:
hI, how can I access my internal sdcard if I cant install none of recoverys avaliable, even with Image folder all from 2.2, none. Im stuck. Update from ext sd card dont work it failed. I need to put dload folder in internal sd. please help... =(
Click to expand...
Click to collapse
The internal SD is mounted on the PC in the pink screen (vol down + vol up + power). To get to the pink screen put an external SD without dload folder.
HFZenon said:
Try this:
Download this file and extract the contents.
When in pink screen mode, connect your phone to your computer.
Copy the 4 files from the downloaded zip to a folder named "image" on your phone (folder should already be there, ).
Pull battery on phone, reinsert the battery and try booting to recovery (vol-up + power).
Click to expand...
Click to collapse
The files in that link are the original ones from 2.2 folder image?
internal sd card in pink screen?? in pink screen you only get a 240Mb partition for Image.
MaRcIuPT said:
internal sd card in pink screen?? in pink screen you only get a 240Mb partition for Image.
Click to expand...
Click to collapse
Yeah that's the boot partition, but it should also mount the internal SD. I haven't tested in Windows, but the internal SD is also FAT32 I think, so it should mount.
Anyway in Linux with the pink screen I see the phone's whole internal flash (14 partitions).. partition 14 is the internal SD.
yeah but in windows it shows only this... I'm screwed
MaRcIuPT said:
yeah but in windows it shows only this... I'm screwed
Click to expand...
Click to collapse
Well, you could boot Ubuntu Live CD from USB-stick / CD to get it working.
thanks a lot, worked like a charm. I was able to install 2.2 b136.
what do you recommend to install miui? I tried so many ways. lol
(my miui backups were made after I installed official b162 and then installed CWM v4 )
NihilistWarGod said:
The files in that link are the original ones from 2.2 folder image?
Click to expand...
Click to collapse
Um, i think so, files are backup from my phone before i tried 2.3beta1v1. Might be cwm recovery though...
Sent from my u8800 using XDA App
MaRcIuPT said:
thanks a lot, worked like a charm. I was able to install 2.2 b136.
what do you recommend to install miui? I tried so many ways. lol
(my miui backups were made after I installed official b162 and then installed CWM v4 )
Click to expand...
Click to collapse
Restoring pre/post beta1 v2 backups is a bit tricky. I personally just installed a clean cm7 from geno's zip. Now I'm trying to get CM7 to work without the need to downgrade to 2.2 first, with the new 5.0.2.7 recovery from geno (the thread title says U8800pro, but it works for also u8800).
Edit: so in conclusion, you should get miui working fine by using a recovery that works, and then installing miui from the original zip, not from your own backup. You also need to downgrade to 2.2, but you're running 2.2 now already?
Related
Hi, Guys
I was trying to root the phone by using the hack-ace.cmd and when I get into the final step - updating the ROM from SD card...I accidentally pull out the cable and then the screen stays on the welcome HTC logo forever.
I have tried the volume down button + power or home + power or even re-root the phone. It came back HTC logo again. But the screen will change to something else when I trying to re-root the phone. The process acually successful, but it still report errors in the very end saying "USB connection fail" or "Golden Card fail".
Here are the steps I followed,
Steps for this process:
1. Download the Advanced Ace Hack Kit
2. Extract the files
3. Install Desire HD drivers in /tools/windrivers/
4. Connect the device via USB and turn on USB Debugging in Settings-Applications-Development
5. Run the hack-ace.cmd as Administrator and start the process by typing "1" and "Enter"
6. The process will run and will take about 5-6 minutes to complete
7. Download your ROM of choice, do not extract it, and copy the .zip to the device SD card
8. Rename the file to "update.zip"
9. Power off your device
10. To boot in the bootloader, perform a battery pull, reinstate the battery, and hold the volume down and power buttons
11. Using the volume buttons to navigate, and power button to make selections, boot into Recovery, clear the cache, and select 'install update from sdcard'.
12. When the flashing process has completed, reboot your device and wait about 3-4 minutes for it to boot fully
13. You device is now rooted and has a custom ROM installed
I strongly believe, I forgot to power off the device and go straight to the bootloader and pressed the install update.zip from SD card.
Then I also believe that I used a corrupted ROM from a crap website, which is about 75Mb...Not normal, right?
The screen turn into HTC logo and I waited for 2mins and seen no changes, hence I pulled the cable out....
The final result is that I always get the HTC logo even if I tried to install new ROM file downloaded from a valid site.
Now the problem solved. Love your guys
lkj-17 said:
Hi, Guys
I was trying to root the phone by using the hack-ace.cmd and when I get into the final step - updating the ROM from SD card...I accidentally pull out the cable and then the screen stays on the welcome HTC logo forever.
I have tried the volume down button + power or home + power or even re-root the phone. It came back HTC logo again. But the screen will change to something else when I trying to re-root the phone. The process acually successful, but it still report errors in the very end saying "USB connection fail" or "Golden Card fail".
Sorry about my English, hopefully you can understand what I am saying.
Any one can help me out?
Click to expand...
Click to collapse
No so understand ur indication issue. Firstly are able to get into bootloader mode? If yes, try to flash stock firmware 1.32......from the billiard, but make sure you have stock firmware in your sd card which it should be a Goldcard.
Sent from my HTC Desire HD using xda premium
Hello. I am unable to get into any mode. Just the big welcome screen. Please advise further...
lkj-17 said:
Hello. I am unable to get into any mode. Just the big welcome screen. Please advise further...
Click to expand...
Click to collapse
Use the button combo to get into bootloader mode.
Sent from my HTC Desire HD using xda premium
Hello. The button combinations do not responde. I have tried the "Volumn Down + Power" and "Home + Power". No changes at all.
lkj-17 said:
Hello. The button combinations do not responde. I have tried the "Volumn Down + Power" and "Home + Power". No changes at all.
Click to expand...
Click to collapse
Pull out the battery first, put back, Volume down + power button together at the same time.
Let me know if you have followed this so far and could get it working?
Sent from my HTC Desire HD using xda premium
That is awesome...This time succeeded.. Then, I press the recovery...The screen goes to black with a red upward triangle... now please tell me the next step..
lkj-17 said:
That is awesome...This time succeeded.. Then, I press the recovery...The screen goes to black with a red upward triangle... now please tell me the next step..
Click to expand...
Click to collapse
you have gone into stock recovery not a custom recovery, you could flash stock firmware from boot loader i think but you cant install custom roms untill your get custom recovery + root + eng s off
hi, thank you for your reply. I have downloaded the Radio.img. and I have tried to wipe the data/factory reset, and wipe cache partition. Then I have transferred a valid ROM into SD card and press "Apply sdcard: update.zip" It returned "Signature verification failed, installation aborbed" The phone before was on usb debugging mode and has been rooted successully. Now, I think the original system is died.... Please advise further. Cheers
lkj-17 said:
hi, thank you for your reply. I have downloaded the Radio.img. and I have tried to wipe the data/factory reset, and wipe cache partition. Then I have transferred a valid ROM into SD card and press "Apply sdcard: update.zip" It returned "Signature verification failed, installation aborbed" The phone before was on usb debugging mode and has been rooted successully. Now, I think the original system is died.... Please advise further. Cheers
Click to expand...
Click to collapse
If u r already in custom recovery and s-off applied with fully rooted, u may flash the rom through install zip file option in custom recovery not update zip file. What was ur last running rom? Stock with rooted or.was already flashed from stock to any custom roms? U my tell us more details so that we could be helping u.
Sent from my HTC Desire HD using xda premium
lkj-17 said:
hi, thank you for your reply. I have downloaded the Radio.img. and I have tried to wipe the data/factory reset, and wipe cache partition. Then I have transferred a valid ROM into SD card and press "Apply sdcard: update.zip" It returned "Signature verification failed, installation aborbed" The phone before was on usb debugging mode and has been rooted successully. Now, I think the original system is died.... Please advise further. Cheers
Click to expand...
Click to collapse
Dude here is the rooted stock ATT ROM it includes the radio. Just download place in root of gold card then go to bootloader with power - volume button. it will recognize the PD98IMG file, will ask to load volume up for yes then let it do its thing. Please search and read before you attempt anything with phone. AS ADVICED ON XDA FLASH AT YOUR OWN RISK.
http://www.megaupload.com/?d=Q6YYQFIM
This is the rooted ATT updated ROM with radio do not rename file just place in root of SD (Not in any folder) Good Luck.
Hello, please look at my original post. I have edited and provide more history. Cheers
Hi mate, I am still little bit confused. You said "place in root of gold card" then "do not rename file just place in root of SD"........I am not professional, but I heard the Goldencard before.. Should I just download the PD98IMG.zip then send it to SD card then go to the bootloader see how it goes?
lkj-17 said:
Hi mate, I am still little bit confused. You said "place in root of gold card" then "do not rename file just place in root of SD"........I am not professional, but I heard the Goldencard before.. Should I just download the PD98IMG.zip then send it to SD card then go to the bootloader see how it goes?
Click to expand...
Click to collapse
Yes, u need to flash PD98IMG.ZIP to have your device working back. If your phone is branded , it will require gold card which u should create it one for your device to recognize it or u may download the above mentioned zip file to ur pc then copy to ur sd card first, and get the phone into bootloader mode to see If it could recognize in case ur phone is not branded, If it is so, then u can save time for not creating goldcard and progress to flash the rom from as card.
Remember no need to rename the file. Ur responding in this thread is on & off, users here could not help u when u urge to get ur phone working back.
Sent from my HTC Desire HD using xda premium
Thank you so much. This file got my system back and it works perfectly.
my phone jammed at STEP6 with RUU on my bootloader screen and 'waiting for device' on my WinXP. now I cant do anything!!!
HElp me!!!
I am picking you need to install the right HTC driver, there should be one on the hack kit, if not google it, look for version one. Once I installed it
It carried on and rooted without issue.
Sent from my Desire HD using xda premium
prasadz8 said:
my phone jammed at STEP6 with RUU on my bootloader screen and 'waiting for device' on my WinXP. now I cant do anything!!!
HElp me!!!
Click to expand...
Click to collapse
Go to desktop, right click on my computer select manage, select device manager from left locate device driver from the list in middle panel, locate the htc usb it may have a yellow triangle next to it, right click and select update software Try this first before downloading another driver, if this doesn't work then you well have to locate new driver
Hope this helps
Sent from my Desire HD using xda premium
Here's another option.
http://forum.xda-developers.com/showthread.php?t=1259821
Sent from my Desire HD, running RCMix Runny v3.3
Hi there, I followed this post:
http://forum.xda-developers.com/showthread.php?t=1420728
And Rooting, etc worked fine, but I can't instal CWM or it does not work for some reason... I copied the Recovery.img to the folder but when i restart the phone and hold Vol+ and power the phone simply won't boot.
Can anyone help me?
80 Views and no one can help me?
Download rom manager from market and press reboot recovery.
Sent from my U8800 using Tapatalk 2 Beta-6
Qqqxxxzzz said:
Download rom manager from market and press reboot recovery.
Sent from my U8800 using Tapatalk 2 Beta-6
Click to expand...
Click to collapse
Thank you so much, will try it now.
Hey, i tested Rom manager app and it detects my phone as U8160 instead of U8800, no problem with that?
nerusonu said:
Hey, i tested Rom manager app and it detects my phone as U8160 instead of U8800, no problem with that?
Click to expand...
Click to collapse
It's problem with some roms but just press cancel. Reboot into recovery option doesn't need that. Rom manager detects u8800 only on 32 kernel custom roms.
Sent from my U8800 using Tapatalk 2 Beta-6
This app works too:
https://play.google.com/store/apps/...vbS5zaXJpdXNhcHBsaWNhdGlvbnMucXVpY2tib290Il0.
Sent from my U8800 using Tapatalk 2 Beta-6
Something must be wrong with the recovery files i've been downloading... i used rom manager to reboot in to recovery and the phone simply stays stuck @ Huawei logo... And if i try to power on + Vol+ it won't start at all. You don't have a working Recovery image somewhere by any chance?
Edit...
What firmware you are using?
If it's B522 or newer, do this:
http://forum.xda-developers.com/showthread.php?t=1457490
Now, turn your phone off and take battery out. Hold volume+, volume- and power button. Your phone should now turn into pink screen. connect it to computer via USB. On your computer go disk(phone)>image and replace recovery image with cwm. Don't forget rename new recovery to recovery.img take battery out to turn off phone.
If not working I suggest you re-flash firmware, but I have still one method left if you don't want to do it.
Sent from my U8800 using Tapatalk 2
By what i can see I have this one:
U8800V100R001C00B517G001
I know that it's an old one but all the links are dead or removed for my unfortune.
Gonna try with that method instead, that was the method i used on the previous 2.2 Rom, didn't thought of doing it like that again, just followed the tutorial
nerusonu said:
By what i can see I have this one:
U8800V100R001C00B517G001
I know that it's an old one but all the links are dead or removed for my unfortune.
Gonna try with that method instead, that was the method i used on the previous 2.2 Rom, didn't thought of doing it like that again, just followed the tutorial
Click to expand...
Click to collapse
Hi,
try this:
http://forum.xda-developers.com/showthread.php?t=1546883
and this:
http://forum.xda-developers.com/showthread.php?t=1420728
Hth,
Ponder
Recopy
I'd say re-download and re-copy the recovery.img file using ES File Explorer, check the permissions, and then reboot your phone.
I found that I need to hold down Vol + and power for a few seconds even AFTER the Huawei logo is already showing.
ROM Manager doesn't detect your phone so I wouldn't use that.
Hope this helps
silverlining said:
I'd say re-download and re-copy the recovery.img file using ES File Explorer, check the permissions, and then reboot your phone.
I found that I need to hold down Vol + and power for a few seconds even AFTER the Huawei logo is already showing.
ROM Manager doesn't detect your phone so I wouldn't use that.
Hope this helps
Click to expand...
Click to collapse
I re-downloaded the file from another place(it was bigger than the one I had), and did all the steps again and it's working. The file I had must had something wrong.
Now it's running DZO's Aurora ICS and wow what a difference between both android versions.
Thanks to everyone that helped me.
nerusonu said:
I re-downloaded the file from another place(it was bigger than the one I had), and did all the steps again and it's working. The file I had must had something wrong.
Now it's running DZO's Aurora ICS and wow what a difference between both android versions.
Thanks to everyone that helped me.
Click to expand...
Click to collapse
It's a huge difference! Glad it worked! Enjoy!
nerusonu said:
Hi there, I followed this post:
http://forum.xda-developers.com/showthread.php?t=1420728
And Rooting, etc worked fine, but I can't instal CWM or it does not work for some reason... I copied the Recovery.img to the folder but when i restart the phone and hold Vol+ and power the phone simply won't boot.
Can anyone help me?
Click to expand...
Click to collapse
I had the same problem with mu Huawei U8800 (normal not pro), when I updated to 2.3 back in march this year, what I did, I went back and reinstalled the Beta version that came back in 2011 (v18) as I had saved it on my school computer (you can try and also search on google if there are some huawei beta roms for u8800 still available as I got mine from a past backup), then with that I was able to boot holding the volume + and - keys together with the power button I got the pink screen, and now I was able to copy and replace the CWM 'recovery' image when I connected the USB cable to the computer, Then I removed the cable and when I pressed the power button and the volume button + button i got CWM. To all the developers who came up with this. You are all amazing!
I triead a lot of thing, but cant downgrade to offical gingerbread, to update ISC.
I moment have latest Oxygen.
English is not my mother language, so can someone explain step by step with DL links, how to do this.
Scuall said:
Not good at english, but i try:
This is my story.
At first i tried install any stock rom, but cant get them installed, cause with 2gb sd, i get always pink screen.
Then tried put /dload into inner card, root directory. Installed Estonia Elisa (stock) like charm. Updated to 2.3.5 also, everything ok. but when tried to get back unlocked pinkscreen vith this tutorial
http://forum.xda-developers.com/showthread.php?t=1457490&page=6
then in my case, it just bootloop. Also as i remember, cant go to pink screen /image.
So installed ubuntu and there i can see partitions. Replaced recovery with newest, get all back. 2.3.5 (installed again), pink screen locked.
So i root phone as in tutorial, and replaced recovery into folder as writed in tutorial.
Then BAM! at first recovery screen (+ power) blue screen, and locked pink.
Then (+ power) stopped working. but pink still work.
But figured out how install firmware updates.
from inner card, no sd in slot - install (ofc. failes)but this method work.
with outer sd. SD in my case MUST BE 512mb only, so it will install. (failes in my case). with battery or usb cable - no effect
In linux cant see partition also and it shows just U8120 device instead of 8800
Totally messed up bootloader or partition. I dont know.
Thanks to my hero dancer_69 he somehow found that china page.
Downloaded http://filespart.com/dl/ds7ltr.html
putted into /dload that update what in archive. just only this file from zip.
and i got back unlocked pinkscreen. Replaced /image folder (jeah i had some backup)
Putted again 2.3.5 into outer sd card and installed as charm.
After that everything goes normal. As followed tutorial.
root, recovery, aurora.
After aurora was installed, i waited about 15 min and disconnected power.
after that factory reset and that it.
So if you cant install firmware update from sd card. Dont use 2gb or bigger. 512 works fine, instead of 2gb. or try differet cards.
Click to expand...
Click to collapse
Oxygen is .32 so it's upgrade if you install gingerbread.
Try to find B518 version of gingerbread because you don't need to root it. Just install CWM 5.5.0.4 and flash aurora ics.
So,
1. make folder "dload" to your external sdcard.
2. put update.app file in dload folder.
3. turn off phone and start it holding volume+ and volume- buttons and power button.
4. update should start
i have rooted ideos.
with - + power i get pink screen.
So i have B518 but its app, i dont know how o install it.
edit: or can u add me to msn: [email protected]
Edit: now i can only go to pink screen and just IDEOS screen, cant reach recovery .... deam, can someone help me ?
Scuall said:
i have rooted ideos.
with - + power i get pink screen.
So i have B518 but its app, i dont know how o install it.
edit: or can u add me to msn: [email protected]
Edit: now i can only go to pink screen and just IDEOS screen, cant reach recovery .... deam, can someone help me ?
Click to expand...
Click to collapse
Does this process the sequence of keys, but with the data cable connected to the pc ... thus enters update screen instead of pink
Sorry for the bad writing!
jes, entire screen is pink.
Scuall said:
jes, entire screen is pink.
Click to expand...
Click to collapse
So you're doing something wrong.
format the memory card into the PC again and put the folder inside dload ...
Then does it again as I said ... data cable connected to the pc ... vol +, vol- and power ... update has to get in that way!
ill try again after format.
using U8800V100R001C00B522G001 (Normal Gingerbread).zip
i do it right?
and i have B518-bootloader, think, it mess all.
Scuall said:
ill try again after format.
using U8800V100R001C00B522G001 (Normal Gingerbread).zip
i do it right?
Click to expand...
Click to collapse
Yes.
2.3.5 official
EDIT: You can see it in numbers ... B522 near the end ...
aaaand nothing. tried multiple times, entering only pink screen, can see only those 4 files, amss, boot, emmcboot, recovery :crying:
also still cant use recovery
Scuall said:
aaaand nothing. tried multiple times, entering only pink screen, can see only those 4 files, amss, boot, emmcboot, recovery :crying:
also still cant use recovery
Click to expand...
Click to collapse
You must copy recovery.img (5.5.0.4) over default recovery.img on the pink screen through USB. Then you can boot in to recovery (volume up + power)
Sent from my U8800
ok. now i get blue screen. ?
no, false alarm, still nothing, just IDEOS
Scuall said:
no, false alarm, still nothing, just IDEOS
Click to expand...
Click to collapse
Can you tell us what have you done and how you are trying to access recovery? Please be specific so that we can better help you...
http://forum.xda-developers.com/showthread.php?t=1457490
this one. after what i cant enter recovery.
to install updates, connecting usb (without batt) and pressing + - power.
Scuall said:
http://forum.xda-developers.com/showthread.php?t=1457490
this one. after what i cant enter recovery.
to install updates, connecting usb (without batt) and pressing + - power.
Click to expand...
Click to collapse
That doesn't give you recovery, that only restores unlocked bootloader for those who installed stock 2.3.5 higher than beta 1..
To install recovery, you must copy recovery.img v5.5.0.4 (it's in the dev section) over original recovery.img that's inside the "image" folder of the pink screen, using USB.
After that, start the phone pressing and keeping pressed vol + / power at the same time until recovery comes up.
i did it! tried also older ones, but nothing.
Scuall said:
http://forum.xda-developers.com/showthread.php?t=1457490
this one. after what i cant enter recovery.
to install updates, connecting usb (without batt) and pressing + - power.
Click to expand...
Click to collapse
Scuall said:
i did it! tried also older ones, but nothing.
Click to expand...
Click to collapse
Well, I don't know what else is failing... bear in mind that for recovery to boot you have to keep pressed vol + / power button simultaneously for quite a bit. Even if normal recovery doesn't show up, huawei's recovery should...
+ power - it shows IDEOS and shuts down after 15 sec.
Scuall said:
+ power - it shows IDEOS and shuts down after 15 sec.
Click to expand...
Click to collapse
Sorry, don't know how to help anymore... I suggest you install official stock 2.3.5 beta 1 again and copy recovery to pink more... maybe the bootloader tutorial you followed changed something.
Sent from my U8800
Try flashing official roms again
Sent from my U8800 using xda premium
i cannot get back to froyo from ezet cyanogenmod7 .32, i tried to hold vol up and vol down, but only shows pink screen, and i tried to power off, remove battery and connect phone to pc and vol up and vol down + power buttom, but also appeared pink screen and didnt started to unpack anything. please help. and i m sorry if it has already been answered but i m loking here and on the net for over 3 hours and didn t find anything.
tank you
skidrow45 said:
i cannot get back to froyo from ezet cyanogenmod7 .32, i tried to hold vol up and vol down, but only shows pink screen, and i tried to power off, remove battery and connect phone to pc and vol up and vol down + power buttom, but also appeared pink screen and didnt started to unpack anything. please help. and i m sorry if it has already been answered but i m loking here and on the net for over 3 hours and didn t find anything.
tank you
Click to expand...
Click to collapse
Put the zip file into internal memory and try again.
Sent from my U8800
skidrow45 said:
i cannot get back to froyo from ezet cyanogenmod7 .32, i tried to hold vol up and vol down, but only shows pink screen, and i tried to power off, remove battery and connect phone to pc and vol up and vol down + power buttom, but also appeared pink screen and didnt started to unpack anything. please help. and i m sorry if it has already been answered but i m loking here and on the net for over 3 hours and didn t find anything.
tank you
Click to expand...
Click to collapse
If you have made a nandroid backup of the stock froyo rom just restore it in CWM recovery if not and if you want to install an official froyo rom in pink screen make sure you have put the dload folder on the root of SD card or the internal SD card with the update.app file and don't forget to backup your IMEI with 5IromToolBox.
Sent from my U8800 using xda app-developers app
entrapmen said:
Put the zip file into internal memory and try again.
Sent from my U8800
Click to expand...
Click to collapse
Im sorry, but i did not understood. did you mean the internal sd card, or do you mean really the internal memory, and if it is the internal memory can i delete the recovery image and the other stuffs that are in there, because if not there is not enough space.
thank you
Use the internal SD card, not the SD card you put (external)... The internal card is the only one you can use to downgrade (please someone correct me if I'm wrong)
Sent from my U8800 using xda app-developers app
Diogomsb said:
Use the internal SD card, not the SD card you put (external)... The internal card is the only one you can use to downgrade (please someone correct me if I'm wrong)
Sent from my U8800 using xda app-developers app
Click to expand...
Click to collapse
Thanks mate, but i already try that and still no joy.thank you anyway.
Mahdial said:
If you have made a nandroid backup of the stock froyo rom just restore it in CWM recovery if not and if you want to install an official froyo rom in pink screen make sure you have put the dload folder on the root of SD card or the internal SD card with the update.app file and don't forget to backup your IMEI with 5IromToolBox.
Sent from my U8800 using xda app-developers app
Click to expand...
Click to collapse
Thank you, but i dont have a nandroid backup of the stock froyo, and also i don t know how to install official froyo rom in pink screen. Can you point me to some tutorial or something like that on how to install in pink screen?
Thank you mate.
ok, i manage to update. my problem was because the sd card wasn t empty. i formated the sd card and put only the dload folder in it.
problem solved.
anyway, thank you so much to everyone that tried to help me.
cheers.
Check your IMEI, I hope it is OK.
Sent from my U8800 using xda app-developers app
IMEI checked, all fine.
Thanks.
I can't enter the cwm, tried to install oxygen 2.2.2 from original 2.3.5. I can't enter the pink screen + I can't enter the firmware update (to the stock 2.3.5, it says that the update failed). On a normal boot up, it resets 1 time then it enters Android system recovery <3e>, it forcefully formattes the /cache, failes to mount /data_pseudo etc. Any ideas ?
herp90 said:
I can't enter the cwm, tried to install oxygen 2.2.2 from original 2.3.5. I can't enter the pink screen + I can't enter the firmware update (to the stock 2.3.5, it says that the update failed). On a normal boot up, it resets 1 time then it enters Android system recovery <3e>, it forcefully formattes the /cache, failes to mount /data_pseudo etc. Any ideas ?
Click to expand...
Click to collapse
Try to enter the firmware update without the battery (only width the charger)
Same thing happened to me, tried everything but no solution
Try to install froyo not gb maybe it should work.
While on android e3 does your computer mount any drive?
Sent from my u8800
entrapmen said:
Try to install froyo not gb maybe it should work.
While on android e3 does your computer mount any drive?
Click to expand...
Click to collapse
It does make a mounting sound, but I can't acces the drive, it recognizes it as a CD one..
What's your model #?
Sent from my Desire HD using xda premium
Somcom3X said:
What's your model #?
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
Sorry for being noobish, but where can I see that ?
herp90 said:
Sorry for being noobish, but where can I see that ?
Click to expand...
Click to collapse
In the back under the battery
Sent from my u8800
entrapmen said:
In the back under the battery
Sent from my u8800
Click to expand...
Click to collapse
IMEI: 353043044370293
S/N: 6QA7ND1152401851
The FCC ID: QISU8800
Model: U8800
Any of above that you need ?
I can enter the pink screen, but when i plug it with the usb into my computer, it doesnt detect it. Doesn't mather which ROM I try to install under the 3e system recovery, it always says, that the update package is not correct, does this mean, that i need a oxygen 2.2.2. update because I installed it over stock 2.3.5 ?
http://shrani.si/f/a/as/1vzznaBj/dscn2184.jpg
When it says : Finding update package... , I tried to install a ROM.
You have a locked bootloader from b52* and that's why you can't see your drive in pink screen.
Did you try to install froyo like i said? It might work. If it won't uhmm...
Sent from my U8800
I did try it already (the old http://forum.xda-developers.com/showthread.php?t=1149150&highlight=oxygen), among with all the other ROM's on xda for u8800. I don't really know what to do :crying:
herp90 said:
I did try it already (the old http://forum.xda-developers.com/showthread.php?t=1149150&highlight=oxygen), among with all the other ROM's on xda for u8800. I don't really know what to do :crying:
Click to expand...
Click to collapse
I'm not sure we are on the same page...
I didn't ask you to install oxygen, i was talking about the stock froyo; Huawei's original firmware?
https://dl.dropbox.com/u/1352963/U8800V100R001C00B138SP04CUSTESTC205D001EsthoniaElisa.rar
this is b138 (froyo 2.2.2).
Extract the files, put update.app into a dload folder and paste it into your sdcard's main folder i mean it's gonna be /dload/update.app
Power off. Press both volume keys and power on. Wait for the update process to finish. Once rebooted it may give errors, don't worry.
Power off your phone, press power on + vol + button simultaniously and go into recovery. And then wipe data/cache. Reboot.
If that doesn't work, send your phone to warranty.
entrapmen said:
I'm not sure we are on the same page...
I didn't ask you to install oxygen, i was talking about the stock froyo; Huawei's original firmware?
https://dl.dropbox.com/u/1352963/U8800V100R001C00B138SP04CUSTESTC205D001EsthoniaElisa.rar
this is b138 (froyo 2.2.2).
Extract the files, put update.app into a dload folder and paste it into your sdcard's main folder i mean it's gonna be /dload/update.app
Power off. Press both volume keys and power on. Wait for the update process to finish. Once rebooted it may give errors, don't worry.
Power off your phone, press power on + vol + button simultaniously and go into recovery. And then wipe data/cache. Reboot.
If that doesn't work, send your phone to warranty.
Click to expand...
Click to collapse
I did everything you said, but it always stops at the firmware update. It always fails to update at the end. I'll keep trying this method because I'm optimistic that it will work.
Tried to install almost all of the firmwares, non worked till now. It always says "Update failed" at 99% .
I somehow managed to get my pc to recognize my phone when in pink screen, it contains one folder; image.
In it, there are: amss.mbn, AMSS.rar, boot, cust and recovery.img, EMMCBOOT.rar, EMMCBOOT.MBN, total size=118 mb.