Hello,
I have flashed my phone 3 months ago, everything worked just about perfect. Now i tried to install a new rom of android and i get these:
When i press vol. down and plug the usb in the phone to get in the "colored screen", the phone won't enter usb mode. After i remove the usb from the phone it says "serial". (PB81100 HX-BC / SPL-2.08. HSPL 8G XE / CotullaHSPL)
When i choose option 4 USB MassStg from MAGLDR, it allows me to see the contents of the sd card and to write data on it
When i choose option 5 USB Flasher , the phone freezes, i can't get back from that option , and it alltso won't allow conectivity to the computer
When i choose option 9 AD Recovery, it sais ADNROID LOAD RAW ERROR: ERROR: Cannot read ramdisk image
When i choose option 3 Boot AD NAND, it boots perfectly well into the rom i am stuck with and it works just fine but i can't acces my sd card at all... it's just like it's missing , in fact that's what android sais.
The SD card i'm sure it works perfectly cause i have put it in an adaptor and tested it with a card reader.
My usb cable is working just fine.
Is there something to do in this situation? Can i somehow wipe magldr and install it again?
don't wipe magldr and install it again, you don't have to. just repartition your cwm through USB flasher and you should be good to go.
one more thing, never use USB mass storage from within magldr,it corrupts data, use a card reader.
Sent from my HTC HD2 using XDA Premium App
Lol, u have a tool for all ur needs.. hd2 toolkit. Every thing u need is in it. Thanks to the dev.
Sent from my HTC HD2 using xda premium
showlyshah said:
Lol, u have a tool for all ur needs.. hd2 toolkit. Every thing u need is in it. Thanks to the dev.
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
Thank you for your solutions guys , but i am a bit of a noob in this domain, can you guide me trough the process for your solutions, i will appreciate it.
LiNcUtT said:
Try to install the newest HTC SYNC in your computer first.
Then go to find the HD2 NAND Toolkit to do everything what you need.
Click to expand...
Click to collapse
When i try to repartition i get this
Rapi.dll is missing
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
On the colored boot screen i can't get my phone to run into USB mode
Rapi.DLL errors,,99% of time caused by older version of windows mobile device center (or activesync).
Google wmdc, find the manual download page and install wmdc.
Zune, wp sdk, r all u need. Every thing is in it. Wmdc is for wp6.5 and xp. Not good for 7 and wp7.
Sent from my HTC HD2 using xda premium
Marvlesz said:
don't wipe magldr and install it again, you don't have to. just repartition your cwm through USB flasher and you should be good to go.
one more thing, never use USB mass storage from within magldr,it corrupts data, use a card reader.
Sent from my HTC HD2 using XDA Premium App
Click to expand...
Click to collapse
Hi marvlesz, would u mind explaining a bit abt how accessing usb mass storage from magldr could corrupt data? Or maybe from your own experience? If possible, then i now what to avoid. I've flashed my phone thrice so far all during some time of flashing accessed sd card using usb mass storage in magldr. I did not notice any problems since i restored only contacts and and some app datas.
Sent from my HTC Runnymede using XDA App
showlyshah said:
Zune, wp sdk, r all u need. Every thing is in it. Wmdc is for wp6.5 and xp. Not good for 7 and wp7.
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
Wrong, activesync is for XP, wmdc for vista / win7. However the wmdc that comes with win7 often gives the rapii error, hence downloading the manual instal package.
hairuleff81 said:
Hi marvlesz, would u mind explaining a bit abt how accessing usb mass storage from magldr could corrupt data? Or maybe from your own experience? If possible, then i now what to avoid. I've flashed my phone thrice so far all during some time of flashing accessed sd card using usb mass storage in magldr. I did not notice any problems since i restored only contacts and and some app datas.
Sent from my HTC Runnymede using XDA App
Click to expand...
Click to collapse
I can not explain it myself, neither have I experienced it before.
But from user reports, it seems that MAGLDR is, for some reason, unable to correctly transfer data. Especially large files(Maybe that's why you weren't affected).
You may have just been lucky, but I wouldn't recommend it.
samsamuel said:
Wrong, activesync is for XP, wmdc for vista / win7. However the wmdc that comes with win7 often gives the rapii error, hence downloading the manual instal package.
Click to expand...
Click to collapse
Yap i know that, but its a little bit long aft i got hd2,its android. But b4 that it was wp6.5, which used to connect, and b4 that my hd7, which never connected to wmdc. I searched for the problem, and figured that wp7 is not comaptible with wmdc. Only wp6.5 is.
Sent from my HTC HD2 using xda premium
But were talking about flashing a winmo phone, even if you're running wp7 on it, its still a 6.5 phone as far as flashing is concerned, and always will be, so its the activesync (wmdc) drivers that are needed. Anything you do in bootloader gets treated as a 6.5 flash,, regardless of what os is on/being put on, the phone.
Thank you guys!, i have managed to fix it. I think the problem was somewhere in my computer cause i was getting so many errors. I have connected my phone to another computer and it worked just fine. Thank you!
Related
hi together,
i have many problems with my HD2, i have try to install a nand over MAGLDR v1.13 + DAF but when i try to install it with ROMUpdateUtility.exe it loads and i can click update, but then nothing happens only 0% nothing more.
I try it then with another tutorial that told me to install a radio first, but the same problem it loads 4% and told me that i have a wrong version or handy or somtehing.
Can someone Help me or told me hhow i can install it on another way?
you run daf.exe not the file you are running
heima77 said:
hi together,
i have many problems with my HD2, i have try to install a nand over MAGLDR v1.13 + DAF but when i try to install it with ROMUpdateUtility.exe it loads and i can click update, but then nothing happens only 0% nothing more.
I try it then with another tutorial that told me to install a radio first, but the same problem it loads 4% and told me that i have a wrong version or handy or somtehing.
Can someone Help me or told me hhow i can install it on another way?
Click to expand...
Click to collapse
You Need to start Over ..
I Would Task29 - then follow the directions here ..
Has everything you need ..
http://forum.xda-developers.com/showthread.php?t=981811
heima77 said:
nothing happens only 0% nothing more.
Click to expand...
Click to collapse
Wrong / missing hspl. Check in bootloader.
Hspl4, 2.08.hspl
thank you i have update the hspl to 2.08 and installed MAGLDR and i have installed an old Android, i want a newer one but my problem ist, the most NAND versions have only and unpacked version of android and i dont understand how i can install them with the DAF.exe because there is no system.img or something or what do i wrong?
i want to install one of this 2 versions:
http://forum.xda-developers.com/showthread.php?t=908528
http://forum.xda-developers.com/showthread.php?t=918899
or can you told me another good android 2.3 nand that i can easy install?
important for me is that there is no freeze and a good battery life and that i can install apps.
another question how can i use the micro sd card?
thanks a lot
Once in magldr u need to choose usb flasher and then connect ur fone with ur computer and click daf.exe it should do it on its own
Sent from my HTC HD2 Gingerbread using XDA App
thx, what im not understand, where must i put the folder: META-INF boot and system?
when the DAF.exe runes it says it cant load the readme.txt and when im click next there comes more erros i think it cant find the .img type file?
I think you are totally confused with files.better do some tutorial reading and start all afresh
Sent from my HTC HD2 Gingerbread using XDA App
im reading the tutorials but im not really understand why it dont work, now i have try the MDJs cya... but the same problem with the daf.exe here the error message:
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
what must i dooo?
The problem is that the roms u r flashing needs recovery mod..after flashing magloder u need to flash recoverymod 400mb file system via usb flasher and then format ur sd card according to to description in the rafpignas thread..once done wiyh all that copy paste the whole zip folder on sd card dont extract anything and then follow the steps on rafpignas thread to install via recovery
Sent from my HTC HD2 Gingerbread using XDA App
thank you now i found the right clockwork flash its very easy thank you very much.
post can be closed
Glad u found it ur welcome
Sent from my HTC HD2 Gingerbread using XDA App
arzin said:
The problem is that the roms u r flashing needs recovery mod..after flashing magloder u need to flash recoverymod 400mb file system via usb flasher and then format ur sd card according to to description in the rafpignas thread..once done wiyh all that copy paste the whole zip folder on sd card dont extract anything and then follow the steps on rafpignas thread to install via recovery
Sent from my HTC HD2 Gingerbread using XDA App
Click to expand...
Click to collapse
im at this point now but im stuck on how to get the zip onto my sd card
i tried magldr mass storage but it wont copy over completely
someone please help
jonsson4000 said:
im at this point now but im stuck on how to get the zip onto my sd card
i tried magldr mass storage but it wont copy over completely
someone please help
Click to expand...
Click to collapse
I've heard that Magdlr has some problems corrupting larger file transfers. Personally, I've never experienced it with v1.13. You can try using a microSD adapter and transfer it directly from your computer to the SDcard, from then on, transfer files in Android before you decide to flash.
h.nocturna said:
I've heard that Magdlr has some problems corrupting larger file transfers. Personally, I've never experienced it with v1.13. You can try using a microSD adapter and transfer it directly from your computer to the SDcard, from then on, transfer files in Android before you decide to flash.
Click to expand...
Click to collapse
thats what i usually do but since i started from square one and formatted my sd card i have nothing
jonsson4000 said:
thats what i usually do but since i started from square one and formatted my sd card i have nothing
Click to expand...
Click to collapse
Flash CWM, then use the USB Mass Storage function from the partitions menu as another method.
h.nocturna said:
Flash CWM, then use the USB Mass Storage function from the partitions menu as another method.
Click to expand...
Click to collapse
figured out how to do it through clockwork thanks for your help
missing hspl
My situation is this,
have a fully working HD2.
Except that it's USB port is damaged, and when it's plugged in USB it won't work.
So I've been limited to run Android to thru SD only.
and that's not all, with the USB port damaged it also means not able to charge the battery, so I bought a direct battery charger and 2 extra batteries.
Thus, every time I need to change the battery I must restart the phone, which means having to boot Windows Mobile, then Android from SD....
But I really want to turn on my phone and go straight to Android, as on NAND. And I know I know there's this Android-run-at-startup-app that I've already tried.
I've reviewed several tutorials to achieve Android NAND, and I was just wondering, could it be done in similar steps using the SDcard as a tool to flash certain files?
Yes.
Format your SD card
Look in my guide post 3 (in my signature)
download the clk v 1.5 extract the leoimg.nbh file to the root of the SD card
Press volume down + end key
Install the file.
Pull out battery
Put rom on SD card
Boot into recovery
And flash your rom
Sent from my HD2 using xda premium
Doing those steps you never have to hook up USB to your phone
Sent from my HD2 using xda premium
kylew1212 said:
Doing those steps you never have to hook up USB to your phone
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
Ohhhh shiii- for real!? I really had very little hope on this, woow I'm about to try that!...
Thanks for the reply!
Edit: okay,, I just took a look at the instructions, and apparently I'm still unable to achieve Android on NAND....
I don't have HSPL, and this leaves me unable to even start because that process requires the phone to communicate thru USB....:/
Sent from my HTC HD2 using XDA App
After successfully putting DARKSENSE on my phone, I decided to put music on my phone, to try the beats audio feature for the rom.
Thing is... the computer wont recognize the phone! ):
Please help. Now I can't even flash a new rom if i wanted too. i need to mount my sd card to do it.
thanks.
( http://forum.xda-developers.com/showthread.php?t=1283682 )
HTC HD2 MAN said:
After successfully putting DARKSENSE on my phone, I decided to put music on my phone, to try the beats audio feature for the rom.
Thing is... the computer wont recognize the phone! ):
Please help. Now I can't even flash a new rom if i wanted too. i need to mount my sd card to do it.
thanks.
( http://forum.xda-developers.com/showthread.php?t=1283682 )
Click to expand...
Click to collapse
Did you come from a full wipe before flashing it? also try going into cwm > mounts and storage > USB storage. it will mount
Nicgraner said:
Did you come from a full wipe before flashing it? also try going into cwm > mounts and storage > USB storage. it will mount
Click to expand...
Click to collapse
Yes, always. cwm recovery or the app?
oh, you meant recovery.
theres:
mount/data
mount/sdcard
mountsystem
which one?
mount /sdcard, obviously
I'm not running Clockworkmod, so I can't check. But I believe it's the lowest option under "mount" menu. Something like "USB mass storage".
Jack_R1 said:
mount /sdcard, obviously
I'm not running Clockworkmod, so I can't check. But I believe it's the lowest option under "mount" menu. Something like "USB mass storage".
Click to expand...
Click to collapse
yup! mount USB storage.
saranhai said:
yup! mount USB storage.
Click to expand...
Click to collapse
it still says at the bottom left of my computer (windows vista) :
"USB DEVICE NOT RECOGNIZED"
HTC HD2 MAN said:
it still says at the bottom left of my computer (windows vista) :
"USB DEVICE NOT RECOGNIZED"
Click to expand...
Click to collapse
have you installed the HTC Drivers onto your computer?
http://www.htc.com/us/support/t-mobile-mytouch-4g/downloads/
aznprodgy said:
have you installed the HTC Drivers onto your computer?
http://www.htc.com/us/support/t-mobile-mytouch-4g/downloads/
Click to expand...
Click to collapse
Yup, i even reinstalled it. nothing still
Settings/connect to PC and choose
Sent from my HTC Glacier using xda premium
samething as connecting the usb and pulling down the notif. bar and changing charging only to mounting the sd card.
i think its the rom.
The rom wouldnt affect clockwork mod from connecting..
Sent from my HTC Glacier using xda premium
HTC HD2 MAN said:
After successfully putting DARKSENSE on my phone, I decided to put music on my phone, to try the beats audio feature for the rom.
Thing is... the computer wont recognize the phone! ):
Please help. Now I can't even flash a new rom if i wanted too. i need to mount my sd card to do it.
thanks.
( http://forum.xda-developers.com/showthread.php?t=1283682 )
Click to expand...
Click to collapse
are you sure the phone doesnt have physical damage ? i had darkside sense too and my usb stopped working , and when i changed to cm7 it still didnt work , i came to the conclusion that my usb has physical damage, now when i want to get a new rom i download straight from my phone
Sent from my Mytouch 4G Running Capychimps Sense 3.5 rom (v.4.0)
it was working perfectly fine until darksense.
Nicgraner said:
The rom wouldnt affect clockwork mod from connecting..
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
well technically, it is connecting, but the computer just wont recognize the device.
Can you try it on another PC or OS like Linux?
Sent from my HTC Panache / CM7 using xda premium.
not at the moment. I'll to download straight from my phone's internet and attempt to flash a gb rom from faux123 and see if it connects.
OK... I'm doomed. My last hope is putting stock mt4g froyo rom
Most likely, as mentioned, one of the data lines (most likely D-) has been physically disconnected/damaged during ROM installation, when you plug and unplug the phone a lot. No new ROM will help you, if you can't mount the phone in recovery. Change USB cable, and if it doesn't help - it's your phone's USB port.
oh boy...but it doesnt make sense to me how the computer can detect the device and not recognize it/
Hi, I'm having problem to flash my HTC HD2 back to android after flashing my HD2 to Windows Phone. The error that I'm having right now is to unable to mount SD Card. Everytime i've tried to mount /SDcard, an error Unable to mount /sdcard occured.
I've tried so many options but still no avail. Tried to use adb shell command but still unable to mount. So, I've tried to run android using SD Card, my phone stuck at port-a-droid screen and keep rebooting. At first, I though it was the SD card but when I tried on my friends HD2, the SD Android can boot and no problem.
I can't think what is the main problem as when I've load back to WP7, my sdcard can be detected and use as a storage and even in Magldr.
Hope someone could shed some light to my problem as i really love this phone.
wakaru_ken said:
Hi, I'm having problem to flash my HTC HD2 back to android after flashing my HD2 to Windows Phone. The error that I'm having right now is to unable to mount SD Card. Everytime i've tried to mount /SDcard, an error Unable to mount /sdcard occured.
I've tried so many options but still no avail. Tried to use adb shell command but still unable to mount. So, I've tried to run android using SD Card, my phone stuck at port-a-droid screen and keep rebooting. At first, I though it was the SD card but when I tried on my friends HD2, the SD Android can boot and no problem.
I can't think what is the main problem as when I've load back to WP7, my sdcard can be detected and use as a storage and even in Magldr.
Hope someone could shed some light to my problem as i really love this phone.
Click to expand...
Click to collapse
Ok, follow these steps and you should be fine:
1. Flash task29 by placing task29.nbh onto root of SD card and holding volume down and power button while phone is OFF
2. Flash magldr or CLk
3. Flash recovery
I highly recommend HD2 Toolkit for this if you are not experienced. just google HD2 Toolkit and you will see the xda thread
Goodluck!
Thanks for your reply.
I will try it and hopefully it will solve my problem.
I will post again for the result. Thanks again.
Sent from my A500 using XDA Premium HD app
wakaru_ken said:
Thanks for your reply.
I will try it and hopefully it will solve my problem.
I will post again for the result. Thanks again.
Sent from my A500 using XDA Premium HD app
Click to expand...
Click to collapse
It should fix everything. Can't wait to hear the results!
Sent from my HTC HD2 using Tapatalk
elesbb said:
It should fix everything. Can't wait to hear the results!
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
Hi again.
I've tried the step that you suggested using the toolkit but still the same problem.
I'm still unable to boot android from the SD as it keeps reboot after showing the port to droid ultimate screen.
Try to install rom via sdcard still giving me the same can't mount error.
Any other suggestion?
I quit confuse on what reason this is happening as when installing WP7, sdcard can be detected. But when I've flash to Stock Desire HD using DFT (as is the only method that I cn use to install android) my sdcard can be detected by the android os.
It's kinda weird actually...
Sent from my A500 using XDA Premium HD app
Have you tried simply formatting your SD card to FAT32? This often solves issues involving the SD card
wakaru_ken said:
Hi again.
I've tried the step that you suggested using the toolkit but still the same problem.
I'm still unable to boot android from the SD as it keeps reboot after showing the port to droid ultimate screen.
Try to install rom via sdcard still giving me the same can't mount error.
Any other suggestion?
I quit confuse on what reason this is happening as when installing WP7, sdcard can be detected. But when I've flash to Stock Desire HD using DFT (as is the only method that I cn use to install android) my sdcard can be detected by the android os.
It's kinda weird actually...
Sent from my A500 using XDA Premium HD app
Click to expand...
Click to collapse
Oh my bad i thought you were trying to reinstall nand after coming from windows phone.
But yes try what nigeldg suggested, also, make sure your setup (SD card folders, startup.txt etc) is correct as well, thats honestly where it seems like its failing. But without the device its hard to try myself
elesbb said:
Oh my bad i thought you were trying to reinstall nand after coming from windows phone.
But yes try what nigeldg suggested, also, make sure your setup (SD card folders, startup.txt etc) is correct as well, thats honestly where it seems like its failing. But without the device its hard to try myself
Click to expand...
Click to collapse
Hi, thanks for your reply.
Actually I did want to reinstall android from WP7 however when i enter recovery mode and choose install from the zip file, I get can't mount sdcard.
I've been trying a lot of things, format using sd formatter, format to FAT32, swap with another sdcard and even purchase new sdcard also gave me the same error. Even trying to fix using adb also fail or maybe I'm not expert enough to fix using adb. Found a topic in the forum by modifying initrd.rc (if i'm not mistaken) my knowledge is still shallow, so I dare not to try such attempt yet.
Do you think using Clk would solve my problem rather using Magldr? Maybe I should give it a try.
As for the boot android from sd is an effort for me to run android as a temporary solution while trying to figure out NAND installation problem but that method also fail.
I've already format my card using FAT32 (but will try to reformat again later), but copy all the android file into the folder and try to reboot from sdcard. Only got to loading screen of port-a-droid ultimate and then my phone reboot. But when I insert the same sdcard into my friends HD2, it boot into the android without a problem as I'm facing right now.
So I don't know what's the different between his HD2 and mine.
Hopefully someone could help me.
Sent from my A500 using XDA Premium HD app
wakaru_ken said:
Hi, thanks for your reply.
Actually I did want to reinstall android from WP7 however when i enter recovery mode and choose install from the zip file, I get can't mount sdcard.
I've been trying a lot of things, format using sd formatter, format to FAT32, swap with another sdcard and even purchase new sdcard also gave me the same error. Even trying to fix using adb also fail or maybe I'm not expert enough to fix using adb. Found a topic in the forum by modifying initrd.rc (if i'm not mistaken) my knowledge is still shallow, so I dare not to try such attempt yet.
Do you think using Clk would solve my problem rather using Magldr? Maybe I should give it a try.
As for the boot android from sd is an effort for me to run android as a temporary solution while trying to figure out NAND installation problem but that method also fail.
I've already format my card using FAT32 (but will try to reformat again later), but copy all the android file into the folder and try to reboot from sdcard. Only got to loading screen of port-a-droid ultimate and then my phone reboot. But when I insert the same sdcard into my friends HD2, it boot into the android without a problem as I'm facing right now.
So I don't know what's the different between his HD2 and mine.
Hopefully someone could help me.
Sent from my A500 using XDA Premium HD app
Click to expand...
Click to collapse
After reading this, and thinking about it for awhile, to eliminate ALL software issues, i would flash stock TMOUS or your carrier's stock Windows Mobile 6.5 ROM and try the sd card there. It almost sounds like youre having a hardware issue. Or wait a minute, what programs did you use to format your SD card? there might be a partition still on it that recovery isnt liking, download mIni tool partition wizard and delete all partitions then create a fat32 partition set as primary. Or use HP USB Disk Storage Format Tool that takes forever but it does an excelent job at erasing completely the contents (master boot records, paritions, data, everything) and restores it to a fresh state. every time i get any sort of external media i use this tool to completely wipe it clean. if problems still persist we may need to move to a google talk chat session or something so i can talk to you as you move through some steps.
elesbb said:
After reading this, and thinking about it for awhile, to eliminate ALL software issues, i would flash stock TMOUS or your carrier's stock Windows Mobile 6.5 ROM and try the sd card there. It almost sounds like youre having a hardware issue. Or wait a minute, what programs did you use to format your SD card? there might be a partition still on it that recovery isnt liking, download mIni tool partition wizard and delete all partitions then create a fat32 partition set as primary. Or use HP USB Disk Storage Format Tool that takes forever but it does an excelent job at erasing completely the contents (master boot records, paritions, data, everything) and restores it to a fresh state. every time i get any sort of external media i use this tool to completely wipe it clean. if problems still persist we may need to move to a google talk chat session or something so i can talk to you as you move through some steps.
Click to expand...
Click to collapse
Hi again.
Thats what I'm affraid off. But if there's no other options, then I have to try to see if it would solve my issue.
BTW, where can i get and download stock WM6.5 ROM. I'm using 512MB version of HD2 and not TMOUS.
Sent from my A500 using XDA Premium HD app
wakaru_ken said:
Hi again.
Thats what I'm affraid off. But if there's no other options, then I have to try to see if it would solve my issue.
BTW, where can i get and download stock WM6.5 ROM. I'm using 512MB version of HD2 and not TMOUS.
Sent from my A500 using XDA Premium HD app
Click to expand...
Click to collapse
Good question lol i have the stock TMOUS ROM, and a custom ROM. The only problem with those is the radio will most likely brick the device.
What carrier do you have? im pretty good at tracking down files on the net. I would start with the carriers website, then go to HTC's website. its 100% out there, just gotta get the blood hounds out and sniff it down i found a 12 year old program (simple .exe file) that would compare two folder directories and output there results to a text file so its definately out there
And i say it might be a hardware issue since you claimed it booted on your friends HD2, thus ruling out a bad SD card, or bad software setup. These devices arent that hard to pull apart, ive had mine a apart more times than i change my underwear xP
So if it is hardware related, prolly a pin thats not connecting 100% (Hopefully) you can easily rip it apart and bend the pin to make contact.
Well the best to ya if you need help finding the stock ROM just post your specs of the carrier and what not and i'll try to help ya. Also if you need anything else you know wher to find me
elesbb said:
Good question lol i have the stock TMOUS ROM, and a custom ROM. The only problem with those is the radio will most likely brick the device.
What carrier do you have? im pretty good at tracking down files on the net. I would start with the carriers website, then go to HTC's website. its 100% out there, just gotta get the blood hounds out and sniff it down i found a 12 year old program (simple .exe file) that would compare two folder directories and output there results to a text file so its definately out there
And i say it might be a hardware issue since you claimed it booted on your friends HD2, thus ruling out a bad SD card, or bad software setup. These devices arent that hard to pull apart, ive had mine a apart more times than i change my underwear xP
So if it is hardware related, prolly a pin thats not connecting 100% (Hopefully) you can easily rip it apart and bend the pin to make contact.
Well the best to ya if you need help finding the stock ROM just post your specs of the carrier and what not and i'll try to help ya. Also if you need anything else you know wher to find me
Click to expand...
Click to collapse
Thanks again. I will try to find stock rom first. If not, I will post again.
Btw, is it possible for me to pull out (or create an image) of the stock ROM as my brother had a friend that ask me to convert his HD2 to Android. But just to be save, I want to extract the original stock rom first just in case and at the same time i could use it to restore my HD2.
Do you think it is caused by the hware. Because if it is, would it also effecting WP7 rom also. A bit weird as WP7 could access my sdcard without an issue. I don't know as i'm no expert in mobile device.
If my device is bricked either because of the radio or others, is it possible to un-brick it.
Anyway, thanks. Will be posting again soon.
If still couldn't solve, then i will just stick to WP7 and sold the unit instead.
Sent from my A500 using XDA Premium HD app
I forgot to ask. If my device came from WM6.5, should I flash the radio first or HSPL?
Sent from my A500 using XDA Premium HD app
wakaru_ken said:
Thanks again. I will try to find stock rom first. If not, I will post again.
Btw, is it possible for me to pull out (or create an image) of the stock ROM as my brother had a friend that ask me to convert his HD2 to Android. But just to be save, I want to extract the original stock rom first just in case and at the same time i could use it to restore my HD2.
Do you think it is caused by the hware. Because if it is, would it also effecting WP7 rom also. A bit weird as WP7 could access my sdcard without an issue. I don't know as i'm no expert in mobile device.
If my device is bricked either because of the radio or others, is it possible to un-brick it.
Anyway, thanks. Will be posting again soon.
If still couldn't solve, then i will just stick to WP7 and sold the unit instead.
Sent from my A500 using XDA Premium HD app
Click to expand...
Click to collapse
Here are the stock ROMs for the UK, so the ones for your carrier are probably on the HTC website somewhere Try searching through your country's branch of the htc website (i.e. rather than htc.com/uk try your country's code) and you will most probably find the ROM you're looking for. If you're flashing from WinMo you flash HSPL>Radio>MAGLDR/cLK>CWM>ROM (in response to your second post)
Nigeldg said:
Here are the stock ROMs for the UK, so the ones for your carrier are probably on the HTC website somewhere Try searching through your country's branch of the htc website (i.e. rather than htc.com/uk try your country's code) and you will most probably find the ROM you're looking for. If you're flashing from WinMo you flash HSPL>Radio>MAGLDR/cLK>CWM>ROM (in response to your second post)
Click to expand...
Click to collapse
Hi and i'm here again to ask a question as i'm quite noob regarding this stuff and i don't want to end up brick my phone.
I've found this ROM upgrade for HTC HD2 at:
www.htc.com/sea/help/htc-hd2/#download
Can i use this rom to flash back to stock rom?
Sent from my A500 using XDA Premium HD app
wakaru_ken said:
Hi and i'm here again to ask a question as i'm quite noob regarding this stuff and i don't want to end up brick my phone.
I've found this ROM upgrade for HTC HD2 at:
www.htc.com/sea/help/htc-hd2/#download
Can i use this rom to flash back to stock rom?
Sent from my A500 using XDA Premium HD app
Click to expand...
Click to collapse
I'm reasonably sure you can, as that says it's just a generic software update. Try it out and see if it helps your SD issue and report back
Nigeldg said:
Here are the stock ROMs for the UK, so the ones for your carrier are probably on the HTC website somewhere Try searching through your country's branch of the htc website (i.e. rather than htc.com/uk try your country's code) and you will most probably find the ROM you're looking for. If you're flashing from WinMo you flash HSPL>Radio>MAGLDR/cLK>CWM>ROM (in response to your second post)
Click to expand...
Click to collapse
Nigeldg said:
I'm reasonably sure you can, as that says it's just a generic software update. Try it out and see if it helps your SD issue and report back
Click to expand...
Click to collapse
Way to steal my thunder lol haha thanks for the added information! i found the same things by browsing HTC's website. Hopefully its not a hardware fault!
elesbb said:
Way to steal my thunder lol haha thanks for the added information! i found the same things by browsing HTC's website. Hopefully its not a hardware fault!
Click to expand...
Click to collapse
Trololol
Nigeldg said:
Trololol
Click to expand...
Click to collapse
*cough*clears throat* loser *cough* mmm sorry about that had a scratch in my throat
:O meanie
Sent from my HTC HD2 using XDA
Hello..
I'm preparing this friend's phone for Android installation (used to run W 6.5).. I upgraded the SPL to HSPL 2.08, and installed MAGLDR... all of that while the SD Card inside the phone. now the card is not recognizable.. I tried choosing USB MassSTG through MAGLDR, I got nothing.. I tried connecting the card to the computer directly, same thing.. no disk shows in computer or disk manager, and when I try to refresh, it just keeps searching forever.
I installed CWM after that, and nothing new. I have both Windows sync and HTC sync installed on my PC.
Anyone had this problem before? Anyone ever did these steps while the card was in the phone?
I read that WP7 locks the SD card and you can use it only by inserting it into the phone and connecting the phone.. is that also the case with W 6.5? could the card be simply locked? the owner wasn't much of a help since he can't remember ever taking the card out of the phone.
Any help would be much appreciated.
hunted22 said:
I read that WP7 locks the SD card and you can use it only by inserting it into the phone and connecting the phone.. is that also the case with W 6.5?
could the card be simply locked?
the owner wasn't much of a help since he can't remember ever taking the card out of the phone.
Any help would be much appreciated.
Click to expand...
Click to collapse
Since you said any help is appreciated, then I'll just answer the latter question.
No, Windows Mobile doesn't lock SD cards. And never use mass storage of magldr, it can corrupt (large) files.
Sent from my NexusHD2 using xda app-developers app
Marvlesz said:
Since you said any help is appreciated, then I'll just answer the latter question.
No, Windows Mobile doesn't lock SD cards. And never use mass storage of magldr, it can corrupt (large) files.
Sent from my NexusHD2 using xda app-developers app
Click to expand...
Click to collapse
Thank you for your response.. I do appreciate it.. it looks like magldr has corrupted the whole card instead of just one file
I hope there is a way to save the card out there..