Hi.
I have a T-Mobile HD2 with:
Digitizer Broken (solderless)
LCD Broken (P/N 60H00300-00P)
Do you think there is any possibility to use a complete assembly with :
Digitizer (soldered)
LCD (P/N 60H00295-00P)
Is it compatible? Any length difference?
Best Regards.
No one knows?
US T-Mobile housing is 1.5mm longer than HTC T8585.
But maybe if you change entire lcd+digitizer assembly it will fit.
I ask this because of a shortage on US T-Mobile HD2 lcd...
I have a broken lcd on my tmous hd2 and am looking for a new lcd. The one that came out of my phone is the solderless one with the small pin connector you just clamp down. The lcd part # on it is 83h00242-05. And the touch screen part # is 60h00300-00p. Ive looked on ebay for just the lcd but they all seem to be for the one you have to solder, part # 60h00295 i think. If anyone finds the solderless lcd one could you post a link on here to it?
i came across this
http://cgi.ebay.com/T-MOBILE-HTC-HD...N-INTEGRATED-/170528488088?pt=PDA_Accessories
its for the full lcd and digitizer assembled
my glass is broken so im getting that one
http://cgi.ebay.com/OEM-HTC-HD2-T85...izer-New-USA-/220634364402?pt=PDA_Accessories
i know changing it is going to be a nightmare but im gona give it a shot, hopefully i wont make it worse lol
My LCD screeb broken yesterday. I have tmobile HTC HD2.But my touchscreen works fine.
Do I need to purchase this one
http://cgi.ebay.com/OEM-HTC-HD2-T85...220634364402?pt=PDA_Accessories#ht_2748wt_698
or
http://cgi.ebay.com/T-MOBILE-HTC-HD...70528488088?pt=PDA_Accessories#ht_1845wt_1014
Please let me know.
Thanks
If it is an HTC (non US T-Mobile HD2) then you should get this:
http://cgi.ebay.com/HTC-Touch-HD2-H...Accessories&hash=item43a1246e01#ht_750wt_1139
It is soldered.
You should RE CHECK by disassembling and check the part numbers. You are going to need to disassemble anyways.
Just to clarify, there are only 2 digitizers available, USA version and non-USA version. If you buy the Digitizer/LCD combo (already together), it doesn't matter which you get although the USA version will say T-Mobile on top. Both 60H00300-00P and 60H00295-00P are the same other than the way the digitizer connects to the LCD (soldered- 295, connected- 300). Hope this helps.
ookba said:
Just to clarify, there are only 2 digitizers available, USA version and non-USA version. If you buy the Digitizer/LCD combo (already together), it doesn't matter which you get although the USA version will say T-Mobile on top. Both 60H00300-00P and 60H00295-00P are the same other than the way the digitizer connects to the LCD (soldered- 295, connected- 300). Hope this helps.
Click to expand...
Click to collapse
You are right, but I heard that NON US model's digitizer is 2mm shorter that US one.
That would mean that the whole housing is different and probably won't fit.
I've only used US T-Mobile version of HD2 so can't confirm this.
It will be very nice to know if a US version would work with a NON US motherboard and vice versa.
Best Regards.
MGA2009 said:
You are right, but I heard that NON US model's digitizer is 2mm shorter that US one.
That would mean that the whole housing is different and probably won't fit.
I've only used US T-Mobile version of HD2 so can't confirm this.
It will be very nice to know if a US version would work with a NON US motherboard and vice versa.
Best Regards.
Click to expand...
Click to collapse
I can confirm that the 60H00300-00P part # USA TMO digitizer is identical to the non-US one, 60H00295-00P in length, width, and size. The only difference is the way the LCD and digitizer mount to each other. You cannot use a TMO digitizer with a non-US LCD and vice versa. I had an opportunity to compare a T8585 (US) and a T9193 (non-US) and the only differences are in the housing and motherboard. The MB on the T8585 (US) is a tiny bit bigger, thats why TMO had to use a slightly larger housing. Everything else is the same (except for frequencies, etc.). I am currently using a 60H00300-00P (US) in my T9193 (non-US) without any problems at all.
ookba said:
I can confirm that the 60H00300-00P part # USA TMO digitizer is identical to the non-US one, 60H00295-00P in length, width, and size. The only difference is the way the LCD and digitizer mount to each other. You cannot use a TMO digitizer with a non-US LCD and vice versa. I had an opportunity to compare a T8585 (US) and a T9193 (non-US) and the only differences are in the housing and motherboard. The MB on the T8585 (US) is a tiny bit bigger, thats why TMO had to use a slightly larger housing. Everything else is the same (except for frequencies, etc.). I am currently using a 60H00300-00P (US) in my T9193 (non-US) without any problems at all.
Click to expand...
Click to collapse
Nice, so as long as they are a matching pair it doesn't matter, you can put a matching LCD+Digitizer from a non-TMO HD 2 into a TMO HD 2 and vice versa?
Steeltippin said:
Nice, so as long as they are a matching pair it doesn't matter, you can put a matching LCD+Digitizer from a non-TMO HD 2 into a TMO HD 2 and vice versa?
Click to expand...
Click to collapse
Anyone tried if the Digitizer/LCD combo (pre-assembled) are really interchangeable???
I have a HD2 (EU-version) where the LCD+digitizer+touch glass is broken. I will buy a digitizer/LCD combo because that will be easier, and as far as I can understand there are two versions;
one combo with the 60H00300-00P (US, non-soldered), and
one combo with the 60H00295-00P (non-US, soldered).
I have a US-version combo at hand, but I need to be absolute sure if the US-version combo fits and work with my EU-phone before I buy.
So, again; anyone really tried if it works??
Any news on this matter? Thank you.
You can find the screen+LCD on ebay for about $70, but the quarlity is so so easy to break when you make the change.
as said before by ookba it should work.
ookba said:
I can confirm that the 60H00300-00P part # USA TMO digitizer is identical to the non-US one, 60H00295-00P in length, width, and size. The only difference is the way the LCD and digitizer mount to each other. You cannot use a TMO digitizer with a non-US LCD and vice versa. I had an opportunity to compare a T8585 (US) and a T9193 (non-US) and the only differences are in the housing and motherboard. The MB on the T8585 (US) is a tiny bit bigger, thats why TMO had to use a slightly larger housing. Everything else is the same (except for frequencies, etc.). I am currently using a 60H00300-00P (US) in my T9193 (non-US) without any problems at all.
Click to expand...
Click to collapse
Mandrakeroot said:
Anyone tried if the Digitizer/LCD combo (pre-assembled) are really interchangeable???
I have a HD2 (EU-version) where the LCD+digitizer+touch glass is broken. I will buy a digitizer/LCD combo because that will be easier, and as far as I can understand there are two versions;
one combo with the 60H00300-00P (US, non-soldered), and
one combo with the 60H00295-00P (non-US, soldered).
I have a US-version combo at hand, but I need to be absolute sure if the US-version combo fits and work with my EU-phone before I buy.
So, again; anyone really tried if it works??
Click to expand...
Click to collapse
Can you confirm that too?
I'm going to buy the US lcd + touchscreen for my EU HD2, to avoid soldering... hope it's gonna work
Get the combo because I have been seeing alot of videos on the soldered ones and the touchscreen stop working, so stick to the combo
klhd said:
as said before by ookba it should work.
Can you confirm that too?
I'm going to buy the US lcd + touchscreen for my EU HD2, to avoid soldering... hope it's gonna work
Click to expand...
Click to collapse
Don't worry, it'll work for sure:
the 2 versions of combo(EU & US) are interchangeable with no reserve!
Hi everyone
I have broke lcd on my htc hd2 and now i want to order a new one.
But I have problem, I dont know wich lcd is good for my htc hd2.
My P/N of lcd is 83H00294-01 and 60H00300-00P US-512 version (not T-mobile).
I have look on ebay and find this replacment for lcd, but I dont know is this lcd good. (w w w.ebay.com/itm/Replacement-LCD-Display-Screen-For-HTC-HD2-T8585-/190677003886?pt=LH_DefaultDomain_0&hash=item2c653c] 2e6e#ht_1122wt_1396)
Please help me.
Thanks, and sorry for my bad English.
Hi everyone,
as you see from my profile I'm an italian guy. I recently came to USA to visit my girlfriend and I found on the Marketplace an T-Mobile HD2 for very cheap which definitively is in very bad conditions planning to fix it completely and making it a new phone.
So I found a new housing here which I guess would be for a T8585.
I heard T-Mobile model has a 2mm difference somewhere... so would that be a problem?
Cnn.cn has two different housings for the T8585 and the T-Mobile version... so.. I wouldn't want to pay three times the price! Do you know any better place to find it for cheaper?
Also... do you know if the digitizer is melted with the screen or if it is splitted from that?
I also heard there are two different digitizer connectors from the T8585 and the T-Mobile version... is the T-Mobile version the one which requires soldering :S?
Hi There,
I've been waiting for weeks for my HD2 digitizer I ordered from ebay. I just got in and it is T-mo branded. I didn't see this when I bought it, as I was careful to get the plug in type instead of the soldering one. It is the plug in type, but the original did not have a T-mo branding. Is it possible to still use this version to replace my digitizer?
Thanks in advance.
yes, you can still use it as long as the plug is correct. As far as I am aware, the digitizers are all the same size for all variants of HD2.
Hi all, i have a question
So my hd2 fell and the screen broke,the lcd is still working and so was the digitizer but it stopped a couple of weeks ago.
Now i have the money and i'll buy a new digitizer.
My question is will the glass for the t-mobile version fit my european (or is it international) hd2?
I don't want to buy it just to find out it doesn't fit or something
Thanks in advance.
I read somewhere that Internation hd2 use lcd and digitizer combo that has to be soldered together but mine is click-on.
Is that the same one t-mobile version is using?
On the back of the lcd is says P/N: 60H00300-00P
EDIT: It looks just like this one.
http://www.ebay.com/itm/Touch-Scree...121?pt=LH_DefaultDomain_0&hash=item3f1cf546b9
Size difference
frixx5665 said:
Hi all, i have a question
So my hd2 fell and the screen broke,the lcd is still working and so was the digitizer but it stopped a couple of weeks ago.
Now i have the money and i'll buy a new digitizer.
My question is will the glass for the t-mobile version fit my european (or is it international) hd2?
I don't want to buy it just to find out it doesn't fit or something
Thanks in advance.
Click to expand...
Click to collapse
There s a little bit size difference between the EU HD2 and TmoUS HD2....
It may fit, but u might face compatibility problems
Recommended that you buy the digitizer meant for EU HD2 from ebay Global easybuy
So as to be sure
Post #4 - Not all good advise ...
No size difference between lcd & digitizer on any model of HD2.
Main difference if replacing just the digitizer is fact one type is a solder connector & one a plug connector.
T-Mobile USA version was plug only connector.
EU version can be both depending on early or late manufacture or if been in for repair already it may of been changed to later version .
If have original SPL you can view the type via bootloader. If unsure wise to look first before ordering ...
Loads of info on this of you search forum:
http://forum.xda-developers.com/showthread.php?t=1341927
http://forum.xda-developers.com/search.php?searchid=154235078
you will need a heat gun to separate the two, then you will have to scrap all the double tape off and re-install new to keep the two and the housing together very easy to repair and very easy to break, Hint of advise, I would take the phone to a qualify repair shop for fix.