Database Users

Bravo Roms

Bravo Site with lots of roms
http://transtour.selfip.com/
My Bravo Rom Mirror​Mediafire - Bravo Rom Mirror
(Its a bit out of date )​
###List of files###
BravoX (BandroidX)
update-bravoX-rc2-signed.zip
CM7
cm72-20120410-custom.zip (Rom By Quarx2k, Customized by Skeevy420)
WhiteRabbitEdition-1.4-Bravo.zip (Rom By TweetyPeety, Ported by Skeevy420)
WhiteRabbitEdition-1.4.1-Bravo.zip (Rom By TweetyPeety, Ported by Skeevy420)
CM7 (Quarx2k)
CM7 2012\04\05 + md5sum
CM7 2012\04\10 + md5sum
CM7 2012\05\06 + md5sum
CM9 (Quarx2k)
CM9 2012\04\12 + md5sum
CM9 2012\04\16 + md5sum
CM9-hwa 2012\04\16 + md5sum
CM9 2012\04\17 + md5sum
CM9-hwa 2012\04\17 + md5sum
CM9 2012\05\06 + md5sum
CM9 2012\05\08 + md5sum
CM9 2012\05\09 + md5sum
CM9 2012\05\12 + md5sum
MIUI
miuiandroid_Bravo-2.3.30.zip (Rom by Miuiandriod.com, Ported by Skeevy420)
miuiandroid_Bravo-2.3.30.1.zip (Rom by Miuiandriod.com, Ported by Skeevy420)
MIUI-Bravo-2.3.30.2.zip (Rom by Miui.us, Ported by Skeevy420)
MIUI-Kobe-2.4.20-es.zip (Rom by Miuiandriod.com, Ported by Aleeyt, Spanish by Miui.es & added by Skeevy420)
PikachuEdition-2.3.2b-Bravo-1.1.zip (Rom By TweetyPeety, Ported by Skeevy420)
PikachuEdition-2.3.2b.zip (Rom By TweetyPeety, Ported by Skeevy420)
Tools
fixed_bravo_sbf.sbf (Quarx2k)
Mods
DroidXGovernors.zip (Skeevy420)​

skeevy420 said:
This is a collection of roms for the Motorola Bravo. Currently, it only contains Quarx's CM9 from May\2012 & a fixed sbf (also from Quarx) for when you may need it, but I plan on adding all Bravo roms I can find eventually. I'll upload CM7 this evening and probably a few others as well. Let me know if Mediafire is blocked and I'll make another mirror. I'd upload CM7 now, but I'm using bandwidth required to play MW3 (not me playing).
Mediafire - Bravo Rom Mirror
###List of files###
CM9 (Quarx2k)
CM9 2012\05\06 +md5sum
CM9 2012\05\08 +md5sum
CM9 2012\05\09 +md5sum
[/LI
CM7 (Quarx2k)
None Yet
MIUI
miuiandroid_Bravo-2.3.30.zip (Skeevy420)
miuiandroid_Bravo-2.3.30.1.zip (Skeevy420)
MIUI-Kobe-2.4.20-es.zip (Skeevy420)
Other
fixed_bravo_sbf.sbf (Quarx2k)
[/QUOTE
Thanks skeevy420 is wonderful ...rom pickachu,withe rabbit, for tweety petty...
Click to expand...
Click to collapse

mataflakitas said:
Thanks skeevy420 is wonderful ...rom pickachu,withe rabbit, for tweety petty...
Click to expand...
Click to collapse
10 Minutes left for CM7 05\06, then I'll move them into my Public Mirror Folder.

skeevy420 said:
10 Minutes left for CM7 05\06, then I'll move them into my Public Mirror Folder.
Click to expand...
Click to collapse
Thanks skeevy420 is wonderfull....

I was sent a PM about a site with a lot of Bravo roms. Since that user cant't post links I will. Credit for the find goes to jnsjack​
Link for site in the OP

Skeevy420, I've tried both WhiteRabit and Cyanmobile, with no success. Cyanmobile is stuck on the M logo, whiteRabbit bootloops. Got any ideas?

mikiemc73 said:
Skeevy420, I've tried both WhiteRabit and Cyanmobile, with no success. Cyanmobile is stuck on the M logo, whiteRabbit bootloops. Got any ideas?
Click to expand...
Click to collapse
on some of these roms that bootlooped I had to go back in and just do a wipe and it booted up.

So, I finally got CyanMobile running, and so far, its pretty smooth. Its only been about an hour, so I've just been re-installing apps, but so far, so good.

a new version of cyanomobile is avaible.

flash now...

Running mokee os.
Seems pretty stable, and battery life is good. 9 hours running Pandora over WiFi and still over 40% when I her home.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my MB520 using xda app-developers app

I've been running quarxs most recent cm10 build, and I tried wiping/flashing a couple of the cm7.2 roms over the last week. None has booted for me, so I'm doing something wrong.
My routine has been: Factory reset, flash zip, flash gb gapps, wipe dalvik, reboot.
I'm getting stuck at red m...
Any suggestions? I considered an sbf, but feel like that's always a last resort. Haven't been that desperate yet.

Seems like a problem I was having last week. I posted in the Bravo problems thread and Skeevy responded with this answer:
"Sounds like an ext4 issue. 2 things to try before sbfing. First factory reset from stock recovery, that's it. If that doesn't work then reflash CM10, reboot, go to boot menu > tools > file systems and select ext3. Reboot and flash whatever.
Your problem is nothing is getting saved to /data or /cache -- both of which is a problem when leaving CM10".
If that doesn't help, I ended up flashing the SBF and re-rooting. But I didn't try his advice first because I was in a hurry and couldn't wait on his response(wife was really mad her phone wasn't working all day!).

I managed to get some time this weekend to work on my phone. I had to sbf to get things working well. I had it boot once after formatting ext3 and flashing, but then I made a nandroid before attempting to restore data from a CM10 install and there was no booting or mounting /data after that.
Thanks for your help. I'm loving the smoothness and stability on euroskank!

acabo de flasear mi MB 520 mi pregunta es despues de eso, rooteo con unlockroot, y como instalo una rom, cual me recomiendas_

Rafcatfish said:
acabo de flasear mi MB 520 mi pregunta es despues de eso, rooteo con unlockroot, y como instalo una rom, cual me recomiendas_
Click to expand...
Click to collapse
Si escribes en español, por lo menos usa el traductor y pon la pregunta o comentario en ingles tambien o te llamaran la atencion.
Si nesecitas rootear e instalar un recovery, dale a este link y utiliza una herramienta muy facil que hay.
If you need to root and install a recovery, click on this link and use the tool to do it, its very easy.
http://forum.xda-developers.com/showthread.php?t=1817842
Despues:
Para entrar en el recovery debes apagar el cel y cuando te presente el led de notificacion en azul presiona volumen abajo.

HI All friends..
I Have tested most of the Rom and Hear is the result..
CM7(Quarx2k/skeevy420) - Most stable rom, but feel OLD..
WhiteRabbitEdition-1.4- Stable -- Quadrant - 2153
WhiteRabbitEdition-2.1 - Stable - Quadrant - 2053 - Easy to install - with ICS launcher feels NEW..
CM10 (Quarx2k) - liked very much..feels very new and happy to upgrade bravo to this,running well for more than month.. - then start to reboot time to time - Quadrant - 1203.. But not stable.. Phone get hot...
MIUI - most of the Roms has language issues..
Any Way Thanks :good::good:.....Quarx2k & skeevy420 for there contribution on Bravo Rome... Like to Have Stable CM10 Rom..... :fingers-crossed:

Bravo with white Rabit 2.1.1
Install WhiteRabbitNextGen-2.1.1-Normal-bravo
working very well.. camera working fine..
Qudrent 2074
SetVSL
32 @ 300Mhz
41 @ 700MHz
54 @ 1100MHz
Thanks...

New builds - who to thank?
I had never really used CM7 before January. I had been running ICS and JB builds since they ran on Bravo.
I must say, I'm really impressed by the stability, responsiveness, and features of of the Skank version of CM7 - and I'm not sure who to thank for the builds! Who builds the roms hosted at the transtour ip, and who hosts them? Thanks a ton...

sdrawkcab3 said:
I had never really used CM7 before January. I had been running ICS and JB builds since they ran on Bravo.
I must say, I'm really impressed by the stability, responsiveness, and features of of the Skank version of CM7 - and I'm not sure who to thank for the builds! Who builds the roms hosted at the transtour ip, and who hosts them? Thanks a ton...
Click to expand...
Click to collapse
Well, there are lots of people to thank, specially quarx!
And all that people who kept trying until we finally get it!
Thanks god our lovely bravo has the same hardware of defy else we were stock on froyo for ever! Other powerful phones will stay on gingerbread, but we have got jb almost fully working.

[TOOL] PRFCreator - easily create pre-rooted firmwares

Introducing my new tool called PRFCreator. With this tool, anyone can easily create a pre-rooted firmware.
What is a pre-rooted firmware
A pre-rooted firmware is a firmware, which already includes root. This is for example important if you want to update the firmware to a version, where there is no public root exploit. To flash a pre-rooted firmware, you need a recovery menu. An unlocked bootloader is not required.
How does the tool work
The tool should be self-explanatory. SuperSU zip can be downloaded from here. [NUT]'s dualrecovery (*.flashable.zip) can be downloaded from here. Recovery is optional and if your device is not supported by dualrecovery, you can use any recovery (just has to be a flashable zip).
Depending on the firmware size and your computer speed, generating a pre-rooted firmware can take up to 7 minutes. The pre-rooted firmware will be created in the directory of the executable and called flashable-prerooted.zip.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The order for the extra files is
Extra flashable
In the order you added it initially in the GUI
APKs
TWRP is recommended for flashing!
Note: If you do not include the kernel in the pre-rooted firmware, it's recommended to flash it afterwards with flashtool (check "system" under Exclude).
Note2: I am not responsible for any damage done to your device or if you end in a bootloop.
Credits
Androxyde - some helpful information about sin files from his flashtool
[NUT] - used his flashable scripts as base
E:V:A - sgdisk utility compiled for arm
dotnetzip developers (note I'm using a slightly modifed version with a bugfix)
Requirements
Microsoft .NET 4.0
Source code
https://github.com/dosomder/PRFCreator
Changelog
v1.3
Fix a signing bug when PRFCreator was in a folder which included a space (thanks Calystos)
Allow multi select for Extra Zip / APK
Update sinflash to v0.42 (fix sha256 bug (thanks RoberM) and large zip file handling (thanks Fragmentation))
v1.2
Fix a signing bug (thanks RyTekk)
Fix bug when flashing multiple apps
Update lz4 lib and 7zip binaries (thanks tetsuo55) and dotnetzip library
Update sinflash binary to v0.4 (supports now also non-msm devices, thanks eoinkennedy for report)
.
v1.1
Allow users to add APKs
Improved sinflash to allow compression
Fix smaller bugs and improve speed
.
v1.0
New method using sinflash (sin files are flashed on the phone directly instead of extracting on the computer)
New busybox
.
v0.9
Compatible with mono
New settings file to change temp folder and choose another destination for the pre rooted firmware
Work towards new sin format introduced with Z3+
.
v0.8
Add the ability to include additional flashable zip files
Display information when clicking on version number
.
v0.7
Add zip signing option
Small fixes in code
.
v0.6 - Nuked (wrong binary uploaded)
Prefer to use gpt uuid instead of partition names
Add different modem sin names
Clean code
.
v0.5
Fixed bug with missing dualrecovery
Added check if SuperSU and recovery are flashable
Added ability to flash modem
Support for sin v2
.
v0.4
Make dualrecovery zip optional
Fix exception if file does not exist in sin
.
v0.3
Initial release

I have a question!
What should I check under 'Include' ?
Kernel: Personally I recommend to check kernel. For some firmwares it's important otherwise the phone won't boot.
FOTAKernel: This kernel is used for OTA Updates. I recommend to include it.
Modem: This is the baseband / modem. Some updates can give you slightly better battery life and signal.
LTALabel: This is a partition with regulatory informations. It should not really change the performance of your device. I recommend to include it.
Click to expand...
Click to collapse
.
Do I need to include a recovery?
No, recovery is optional. If you do not wish to include recovery you should add this flashable zip under Extra Files to be able to mount system as rw: https://github.com/dosomder/SonyRICDefeat/blob/master/RICDefeat.zip
Note: If your bootloader is unlocked, this is not needed as RIC will be disabled anyway.
Click to expand...
Click to collapse
.
Can I edit system.ext4 inside flashable zip?
Yes, you can edit it on a linux machine. You don't have to change anything else in the flashable zip. See here for more info: http://forum.xda-developers.com/showpost.php?p=55547862&postcount=246
Click to expand...
Click to collapse
.
What is zip signing?
For a proper flashable zip, zip signing is used. It generates a hashtable of all the files in the flashable zip to verify its integrity. Note that zip signing might double the process time of generating a flashable zip.
Click to expand...
Click to collapse
.
Does it wipe my user data?
No.
Click to expand...
Click to collapse
.
What is extra zip?
With this feature, you can include additional flashable zip files. An example is to include Xposed directly (you can find the flashable zip in the Xposed apk).
Click to expand...
Click to collapse

Good news... Will try later...

This is awesome tool...
Still couldn't find free time to test it but if it's working and I'm sure it is...
This is more then welcome...
Tnx mate...
Sent from my D6503 using Tapatalk

Will try this on the next FW release, thanks! :good:

Thanks for the tool. Looks great. I'll try it.

Hi,
Thank you.. Looks really good! What do the Kernel, FOTAKernel and LTALabel checkboxes do? Also, will this work with the latest .133 ftf?
Regards,
Alan

nalab1 said:
Hi,
Thank you.. Looks really good! What do the Kernel, FOTAKernel and LTALabel checkboxes do? Also, will this work with the latest .133 ftf?
Regards,
Alan
Click to expand...
Click to collapse
It will include those in the flashable zip. FOTAKernel and LTALabel are not really important but I thought why not include this feature. Kernel is more important and I recommend to always use the kernel from the firmware you're using.
It should work with all the current ftfs (the tool is built for sin version 3).

zxz0O0 said:
It will include those in the flashable zip. FOTAKernel and LTALabel are not really important but I thought why not include this feature. Kernel is more important and I recommend to always use the kernel from the firmware you're using.
It should work with all the current ftfs (the tool is built for sin version 3).
Click to expand...
Click to collapse
Thanks for the reply... What is sin version 3? Also, what are your recommended settings? Tick all boxes or just the Kernel box? What devices/ROMs has it been tested on? Sorry for all of the questions! :laugh:

i just used the xperifirm tool to get the latest z2 .323 update, then used flashtool to create .tft, then your prfcreator tool to make the flashable zip. everything worked perfectly fine (many thanks to the dev's for all this nice and easy to use tools btw), this .zip rom should now be flashable from twrp (i got a locked and unlockable BL) no matter what i have installed on the phone right?
Thanks for your help, i'm new to sony devices and my z2 is only 20 days old, i'm trying hard not to brick it

Wow! Is this magic?
Xperia™ Z (C6602) with Tapatalk!

There was a dev who would create pre-rooted images you could flash on Galaxy S3 phones... that was something very cool!
So, I should be able to flash the zip this creates and have a "pre-rooted" phone image...
I'd half thought you were creating a root-injected FTF file... but this is actually pretty cool as well... (saves the pain that I normally go through to root the image after flashing it... thankful I have an unlocked boot loader...)

nalab1 said:
Thanks for the reply... What is sin version 3? Also, what are your recommended settings? Tick all boxes or just the Kernel box? What devices/ROMs has it been tested on? Sorry for all of the questions! :laugh:
Click to expand...
Click to collapse
The first byte of a sin file (contents of ftf file, the ftf is just a zip) is the version. Currently Sony uses version 3. Well if I would create a pre-rooted zip for myself I would tick all the boxes. I have tested the tool a handful of times on my Z1C.
ptmaniac said:
i just used the xperifirm tool to get the latest z2 .323 update, then used flashtool to create .tft, then your prfcreator tool to make the flashable zip. everything worked perfectly fine (many thanks to the dev's for all this nice and easy to use tools btw), this .zip rom should now be flashable from twrp (i got a locked and unlockable BL) no matter what i have installed on the phone right?
Thanks for your help, i'm new to sony devices and my z2 is only 20 days old, i'm trying hard not to brick it
Click to expand...
Click to collapse
Good to hear. And yes, that is correct. I still recommend to take a backup in TWRP before flashing it (just to be on the safe side).
scifan said:
There was a dev who would create pre-rooted images you could flash on Galaxy S3 phones... that was something very cool!
So, I should be able to flash the zip this creates and have a "pre-rooted" phone image...
I'd half thought you were creating a root-injected FTF file... but this is actually pretty cool as well... (saves the pain that I normally go through to root the image after flashing it... thankful I have an unlocked boot loader...)
Click to expand...
Click to collapse
It's actually not possible to create modified FTF as Sony uses RSA2048 signatures. And yeah, the tool is mainly aimed for those on locked bootloader

NICE! I was just waiting for a root method for my Xperia M2 with KitKat.. The only problem is that there's no Dual-Recovery for it... Would be possible to try the T2U Dual-recovery on my M2?

Very clever, thanks!

Make for samsung please...

linuxct said:
NICE! I was just waiting for a root method for my Xperia M2 with KitKat.. The only problem is that there's no Dual-Recovery for it... Would be possible to try the T2U Dual-recovery on my M2?
Click to expand...
Click to collapse
+1

after finish, app create zip and 2yn file. is it safe to delete 2yn file?

najar360 said:
after finish, app create zip and 2yn file. is it safe to delete 2yn file?
Click to expand...
Click to collapse
What is the filename of the second file? Are you sure it's created by PRFCreator?

Hi @zxz0O0
Thanks for your reply! This is definitely for locked bootloaders - correct?
Regards,
Alan

[FAQ] [WIP] [ALPHA BUILD ] CyanogenMod 12 for i9300

I wanted to start a thread with the Frequently Asked Questions regarding the CM12 port of our beloved Galaxy S3 (GT-I9300)
Download
Latest version:
JustArchi said:
Beta 1 Download
Alternate Download via Google Drive
Alternate Download via 4shared
MD5: 46dbfa5cb28e0d4927c24d4c8cb75f87
SHA1: bcfc03c36acb5d6a861e2a188422364008a32dc8
Working:
- updater-script (flashing)
- kernel (booting)
- OpenGL (CPU rendering)
- MALI blobs (GPU rendering)
- HWComposer (not updated to latest nameless release)
- Rotation
- Camera
- WiFi
- Bluetooth
- NFC (Android Beam)
- Sensors (ALL!)
- Internal / External SD Card
- Vibration
- GPS
- RIL
Changelog
- Android 5.0.2
- Updated CM Sources
- Fixed Wifi issues
- RIL completely working
- Stock Camera working
- Bootloop Issues fixed
This is NOT A STABLE BUILD.
I STRONGLY suggest to use only stock kernel bundled with the ROM and ArchiKernel V1.6+, unless you want to face other issues
If you like what you're flashing, support your fellow i9300 developers: JustArchi, Moster2, arter97
Big kudos and thanks to dhiru1602
Manifest / Sources
XDA:DevDB Information
[WIP] [Beta 1] [2014-12-22] CyanogenMod 12 for i9300, ROM for the Samsung Galaxy S III I9300
Contributors
JustArchi, Moster2, arter97
Source Code: https://github.com/ArchiDroid
ROM OS Version: 5.0.x Lollipop
Version Information
Status: Alpha
Created 2014-11-12
Last Updated 2014-12-23
Click to expand...
Click to collapse
GAPPS download
Where can I download the latest GAPPS (Google Applications)?
https://s.basketbuild.com/gapps
Use the CM12 download link
Bugs
Known bugs:
smart lock with NFC crashes settings
Mobile network is always half the signal strength
Mute not working in calls
Message while flashing in recovery
I'm getting a message: "mount failed dev/block/mmcblk0p12 at /data: Device or resource busy"
That is because of the new type of flashing. It's still flashing though and takes a while. Be patient.
Bootloop
My device bootloops! What can I do?
Before thinking your device is bootlooping, give it at the very least 5 minutes, art takes a while to optimize during the 1st boot.
If that doesn't work, try philz latetst touch recovery.
Get it here
Download the .tar file if you want to flash using Odin.
Use the .zip file if you already have a custom recovery (CWM, TWRP etc)
If that doesn't work, get usefull logs.
See here...
Keyboard isn't working
[EDIT]
SOLVED IN BETA1!!!
Whaaa, I have no keyboard, whats wrong?
Enable "Hardware" on Keyboard settings
No 3G/data
Moster2 said:
How to get working data
1. Download this small shell script here.
2. Put in on your internal storage /sdcard. Via file browser or
Code:
adb push data_on.sh /sdcard/
3. Open the terminal emulator app. Then type the following:
Code:
su
sh /sdcard/data_on.sh
Important: You need working root (supersu or superuser) and do this every time you enable 2G/3G data. Also, you have to have data enabled when executing this script.
Original Post: http://forum.xda-developers.com/showpost.php?p=56125262&postcount=17207
Also thanks to Marco Magliona who gave a hint to that.
Click to expand...
Click to collapse
No status bar
I have no status bar and no lock screen, whats wrong?
Did you flash any other kernel? Use stock embedded kernel (reflash ROM to use stock kernel)
Wifi problems
How can I get wifi working on my murata chipped S3?
Try this:
http://forum.xda-developers.com/showpost.php?p=56938378&postcount=739
SD-card problems
I'm unable to use my SD card!
EXT4 and a variety of other filesystems are not supported.
Only FAT32 is supported up till now (until CyanogenMod supports the orther filesystems)
Root
I lost root!
Flash SuperSU in recovery.
Download:
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
CM11 features
CM11 feature 'x' isn't working anymore/missing, when is it available again?
Don't ask for features or ETA's.
The devs are doing this in their spare time FOR FREE!
If you can, you can try to help by learning how to build and code the features (see Building your own CM12 build for the i9300 below)
Changelog
Mainly only new CM12 commits.
Best and easiest what you can do is check this site: http://www.cmxlog.com/12
Dual boot
Can I dual boot this ROM?
Yes:
Extended tutorial with screenshots here
well you can only dualboot LolliPop if it is 1st ROM, i.e you can not use multiboot.zip to flash the alpha CM12 to 2nd ROM directly
you have to backup current apps on the ROM,
wipe data/factory reset from Philz Recovery provided by arter97,
install the Alpha CM12 zip,
then flash arter97 kernel (4.0-beta1),
then flash multiboot.zip followed by the ROM you want and restore your apps when booting in the 2nd ROM
BUT...
- You can't do phone calls (IMEI and Baseband was OK)
- You can't pull down the notification bar, I tried, tried, one finger, two, staring it... but don't... T_T
Because of arter97 kernel
Nameless 2.0 commits
I found the commits of Nameless, can we use it to get 3G working?
No, those commits aren't complete yet.
See here
Building your own CM12 build for the i9300
Start learning by following this tutorial here:
http://wiki.cyanogenmod.org/w/Build_for_i9300
Donate
Awesome ROM, where can I donate to help the devs buy some beer?
You can donate on all dev on their profiles, all have option "Donate to me". Also You can see this option below my avatar on ledt this post. But don't forget I'm not developer.

Why FAQ thread here? And our i9300 is not Galaxy S2

Its Galaxy S3 Not S2
Sent from my GT-I9300

dmukhin said:
Why FAQ thread here? And our i9300 is not Galaxy S2
Click to expand...
Click to collapse
Could have posted it in General, I agree.
GT-I9300 = Samsung Galaxy S3

RoadXY said:
Could have posted it in General, I agree.
GT-I9300 = Samsung Galaxy S3
Click to expand...
Click to collapse
look at 1st post, you wrote wrong device name
I wanted to start a thread with the Frequently Asked Questions regarding the CM12 port of our beloved Galaxy S2 (GT-I9300)
Click to expand...
Click to collapse

I wanted to start a thread with the Frequently Asked Questions regarding the CM12 port of our beloved Galaxy S2 (GT-I9300)
Click to expand...
Click to collapse
first line of thread

this is not about development and should be in General forum!

SignalX said:
this is not about development and should be in General forum!
Click to expand...
Click to collapse
Already asked a mod for a move

jackq said:
look at 1st post, you wrote wrong device name
Click to expand...
Click to collapse
Thanks, got it, sorry.

Lil Geeky said:
first line of thread
Click to expand...
Click to collapse
Got it, thanks.

@RoadXY
I have installed cm12 alpha 2 (now update to 3) with multiboot zip as second Rom.... My first Rom is stock 4.3 and second Rom cm12 with working call.... I use the arter kernel In all the two Rom and I have last twrp
I do this:
-Have first Rom with arter kernel (beta2)
-go to recovery (last twrp) flash multiboot zip and, WITHOUT restart recovery flash cm12,gapps,arter kernel.... Than restart to first Rom and use aSwitch to go to second Rom.... Now you see cm12 bootanimation and WAIT a lot (I don't care how much time) first time I think is bootloop but after try again I'm waiting and is start.... After start i go again in recovery and after flash multiboot zip I flash the last beta of super Su to have full working root....
Hope this can helpful and add to faq
Added screens of cm+kernel version and aswitch to see I'm on second rom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

bjtmosfet said:
@RoadXY
I have installed cm12 alpha 2 (now update to 3) with multiboot zip as second Rom.... My first Rom is stock 4.3 and second Rom cm12 with working call.... I use the arter kernel In all the two Rom and I have last twrp
Click to expand...
Click to collapse
Thanks! Editted the OP

Anybody replying here? @RoadXY Just as we force disable back light can i Disable battery LED?

Umh I don't if you can use any led control app as light flow but you can try

bjtmosfet said:
Umh I don't if you can use any led control app as light flow but you can try
Click to expand...
Click to collapse
Okay

Does arter97 dual boot work only with cwm? Is it possible using twrp recovery?
Sent from my GT-I9300 using Tapatalk

@RoadXY Still no luck with YouTube video colour glitch. Turned on / off nu player. Same some video have glitch some don't. Any fix?

fosskevin said:
Does arter97 dual boot work only with cwm? Is it possible using twrp recovery?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Don't know, I dont dual boot, sorry.

This also occur if i stream YouTube from chrome browser

mjp93 said:
@RoadXY Still no luck with YouTube video colour glitch. Turned on / off nu player. Same some video have glitch some don't. Any fix?
Click to expand...
Click to collapse
No, not currently. But I'm no dev.

[ROM][4.2.2][DWUI MIX NEO] Grand Duos Neo TV - GT-I9063T

DWUI MIX NEO
FABBINLITEDTV I9063T​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
With a great pleasure i announce this Work for fabbinlitedtv device ( Grand Duos Neo TV) . I had a desire to bring one oportunity for the Grand Duos Neo TV to gift a Custom ROM and after many studies and tentatives to make a md5 i got port TWRP and make this custom rom. so enjoy .
Present the DWUI MIX Neo, following my work from delos3geur the Droidwin and DWUI ROM i did this MIX .
What Mix? Cause the users can be try the MIUI Experience and also CM Experience using Trebuchet and some apps
ROM exclusive for GT-I9063
Custom UI
Custom Statusbar
Custom FOOSP apk ( Configure Launcher to Trebuchet hide activities)
Custom Framework
Tweaks
Pre Rooted, official SU binaries
Zipalign
Cleaned
MIUI Experience:
MI Launcher 2.7.0
MI weather
MI Themes
MI Dialer Dual
MI Contacts and SMS
MI Cloud
MI Account manager
MI Cloud
Ported from MIUI ROM
MI Music app
MI Games
MI SuperMarket
MI Explorer
MI Compass
MIUI and Huwaei Media
Ringtones
Alarms
Notification
Sounds
Ubuntu Wallpaper styles
CM Experience:
CM10.1 Official Launcher
CM File Manager
CM File Theme manager
Material Dark Blue Hex Colors
Kitkat DeskClock
DWUI Config Launcher
Next Version after feedbacks I will make a complete AOSP framework changes like Droidwin ROM
Others adds
SuperSU
Xposed Framework
Root Checker
Wallpapers
Themes
Partner-SwiftKey
DOWNLOADS:
ROM MIRROR
TWRP 2.8.0 MIRROR
ODIN 3.11 MIRROR
How to Install?
1) Download all files
Put the DWUI Mix zip on External SDcard inside a folder
Put the TWRP tar in your Desktop PC
Unzip Odin .exe in your desktop PC
2) Reset your device with Data factore reset in Settitngs >> Accounts >> Backup and Restore
3 ) Put device on Download Mode and connect on PC Odin by USB cable
4) Select the PDA or AP button to browse TWRP file and wait validation. After do that click in start button
5) Restart device on TWRP go to wipe default ( Data, cache and Dalvik)
6) Flash Zip file and Reboot
Wait 5 minutes to finish flash install and configure setup wizard again
Choose your preference launcher, by my option the MI Experience is very nice and similar
Issues: I fixed some libs to use the trebuchet Launcher but have some settings that just works with a complete CM framework ( sorry)
Use Permission - Important : Isn't allowed and not authorize any modification and publication of my work, like image , design , color , buttons, layout etc. All rights reserved Alessaproc Design and @mjraogr
Thanks to
@decalman for Rounded Toggles , Blue Design . Thread with more Mods avaliable here.
@Chainfire for SuperSu development and Instructions for make a rootable shell zip
MIUI Team for MIUI Apps
Cyanogenmod for CM Apps
XDA Information
DWUI MIX NEO Theme ROM for the Samsung Galaxy Grand Duos NEO TV
Contributors
mjraogr
Version Information
Status: Stable
Current Stable Version: baffinlitedtv
TWRP: Ported from baffinlite
Created 2017-05-06
Last Updated 2017-07-20
MY HISTORY WORK
RELEASES OF UNIANDROIDMOD PROJECT​
SOURCE DEVELOPMENT IN PROGRESS- MIUI 7 PATCHROM DELOS3GEUR​​​
BOSP BAIDU CLOUD OS
DROIDWIN V67 FOR BAIDU ROM LOLLIPOP THEME
AOSP FULL EXPERIENCE​DROIDWIN V3.2 - MATERIAL LEMON ANDROID 5.O
DROIDWIN V3.1 - MATERIAL LIGHT KK 4.4.2
DROIDWIN V3 - MATERIAL HOLO DARK 4.4.1
DROIDWIN V2 NEW THEME-
DROIDWIN V1 - ALPHA BLUE
TW MOD​ANDROWIN ROM WHITE AND BLUE TW ​
MIUI Designer Team
Themes for MIUI 8:
M12
M11
Fli8
Greenriver
Redmi City Pro
Booble
Booble II
Themes For MIUI 7
Redmi City
Fli 8 Concept
DWUI Themes for Baidu Cloud OS
CM Experience
High Life
DWUI 7
DWUI 7s​

monday I'll install it, you may sure, thanks a lot!

yea bro, I was trying to install it but it didn't work and I need an solution for this and I follow your steps really carefuly!

dude I asked for a solution but you didn't answer me, ROM is not working (crashes on TWRP) and you do not say a single word, almost a month, sorry but I have to report this thread.

no meu gt-i9063t deu certo. apesar de dar uma mensagem de erro no TWRP funcionou

Scrluiz said:
dude I asked for a solution but you didn't answer me, ROM is not working (crashes on TWRP) and you do not say a single word, almost a month, sorry but I have to report this thread.
Click to expand...
Click to collapse
Sorry to be late
I lost all my data and I'm without PC. My laptop HD is gone with all development things.
What is happining with ur device? Post shots here.
Thanks
MJ

josimarxavier007 said:
no meu gt-i9063t deu certo. apesar de dar uma mensagem de erro no TWRP funcionou
Click to expand...
Click to collapse
Thanks for reply . Are you keep using? It's important the information about tests. This package is a brazilian CSC vendor variant
What step procedures you did to get successfully flash?
Thanks
MJ

mjraogr said:
Sorry to be late
I lost all my data and I'm without PC. My laptop HD is gone with all development things.
What is happining with ur device? Post shots here.
Thanks
MJ
Click to expand...
Click to collapse
nevermind bro, I'm sorry about your lost, I freaked out when phone didn't boot up, but after I do some crazy stuff here (like reinstall stock rom, factory reset and after this, install DWUI ROM the phone starts successfully! but factory reset/wipe data, dalvik cache and other stuff didn't work using TWRP, that's why the ROM don't boot here. so, sorry again, great ROM! (phone isn't that great, but xposed + supersu are awesome!) thank you again!!

Scrluiz said:
nevermind bro, I'm sorry about your lost, I freaked out when phone didn't boot up, but after I do some crazy stuff here (like reinstall stock rom, factory reset and after this, install DWUI ROM the phone starts successfully! but factory reset/wipe data, dalvik cache and other stuff didn't work using TWRP, that's why the ROM don't boot here. so, sorry again, great ROM! (phone isn't that great, but xposed + supersu are awesome!) thank you again!!
Click to expand...
Click to collapse
Ow that great!
I remember about stock rom. Cause all tests was flashing package affer a clean stock flash.. In sequence I was flashing the twrp.
Well, here I need now to buy new HD, prepare sources, dev kits to support things and remain the developments
My ideia is adjusted framework to change designs
Regards
MJ
MJ.

Thank you very much !!
Thank you very much, it worked very well!
Now missing a custom rom 5.0 or even for 7.0

Fiz uma pesquisa hard e so tem a sua ROOM na internet toda pro nosso gt-i9063 então so tem você por nos amigo, se fizer uma versão com 5.0 tu vai vira o herói da pátria kk boa sorte com o projeto ai e espero que veja uma room 5.0

Gustavo0104 said:
Fiz uma pesquisa hard e so tem a sua ROOM na internet toda pro nosso gt-i9063 então so tem você por nos amigo, se fizer uma versão com 5.0 tu vai vira o herói da pátria kk boa sorte com o projeto ai e espero que veja uma room 5.0
Click to expand...
Click to collapse
Concordo contigo Gustavo.

Rom

ola, preciso de sua ajuda se possivel... meu gran duos neo i9063t deu erro de data, nao inicializa o android. ja dei reset, instalei stock rom, fiz recovery pra formatar ext4 na partição e nao consigo recuperar. se vc puder pelo menos diponibilizar os arquivos originais da pasta DATA em zip pra instalar pelo twpr. eu agradeço,

qual versao do android essa rom?

[ROM][11][OneUI-3.1] TurboPort A40 v1 [m30lte][BETA]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BEFORE CONTINUING READING, HIT THANKS BUTTON! A LOT OF EFFORT HAS GONE INTO THIS.
READ COMPLETE POST FOR THE BEST EXPERIENCE WITH THIS ROM.
As usual, I am not responsible for damage to your device, you, the user is choosing to make these modifications.
Your device's warranty is VOID if this procedure is followed, Proceed at your own caution!
CREDITS:
I would like to thank my mentor @neel0210 for helping me get into OneUI development and I would not be here presenting my work without him., thanks senpai!
Big Thanks to @Astrako for encouragement, timely advice & kind words.
I would like to thank my mentor Augustin94.
My friend in this endeavour since the beginning @el0xren for his fixes and mods and tolerating my spam. I would not know what I would do without you buddy.
This is ROM was made in heavy collaboration with @VDavid003 who shared with me his knowledge and technical support. I consider him a heavy contributor. Go and support him,he's a cool bloke!
Myself for bringing you this A40 R Port ROM for the M30 & Samsung for their sources .
This is the OneUI 3.1 [not core] full port from the Samsung Galaxy A40 to Samsung Galaxy M30.
THIS ROM PACKAGE HAS A NEW KERNEL WITH UNDERCLOCK TO INCREASE STANDBY EFFICIENCY!
LITTLE cluster (6x A53 Cores) underclocked from 449MHz to 343MHz.
big cluster (2x A73 Cores) underclocked from 936MHz to 502MHz, big cluster overclocked to 2.18GHz.
Mali G71 MP2 overclocked to 1100Mhz from 845Mhz. Gamers rejoice!
Based on: A405FNXXU3CUC4 AP Ireland latest March 2021 security patch
Base Firmware: M305FDDS8CUB1 Base Firmware (BL & CP)
Reported to be working with firmware w/ following details
Device: Samsung Galaxy M30 SM-M305[F] / SM-M305[M]
BL: M305FDDS8CUB1
CP: M305FDDS8CUB1
CSC: HOME_CSC_OMC_ODM_M305FDDS8CUB1
Patch: 1st March 2021
Android Version: 11
One UI Version: 3.1
========================================================
INSTALLATION PROCEDURE:
========================================================
If you're coming from TurboROM or other custom ROM apart from stock skip to step "c", assuming you have BL unlocked and the latest TWRP installed.
a.Be on the latest M30 M305FDDS8CUB1 firmware, I will not entertain your grievances if you're on other version.
b.Make sure bootloader unlocked and the Odin Download mode splash screen displays KG State:checking and OEM LOCK: OFF.
c.Get the latest TWRP stable over here https://forum.xda-developers.com/galaxy-m30/development/recovery-twrp-3-4-0-0-recovery-t4131667
d.Get ROM zip (See downloads at end of post).
e.Boot into TWRP and Wipe Data, Cache, Dalvik Cache.
f.Place the single ROM zip you downloaded on MicroSDCard as you will be Formatting Data later.
g.Install A40 Port ROM zip file, read on screen instructions.
h.After installing, format data in Wipe->Format Data->yes, if you want to keep internal storage data don't do this.
k.You will need to flash a patch, find it in download named patch.zip and flash it right after the ROM zip.
l.Reboot into system.
Device will take some time to install and bootup, wait patiently.
In the mean time read over the features listed below.
A40 Port Version BETA 1
========================================================
ROM FEATURES:
========================================================
1.Stock A40 System FULL port, ALL A40 ONEUI 3.1 Features.
2.Minor debloating performed.
3.1st March 2021 Security Patch.
Feel free to report bugs, & give suggestions below.
If you want to donate, message me on Telegram @cha0scl0wn.
HIT THANKS IF YOU LIKED OUR WORK.
========================================================
DOWNLOADS
========================================================
1.ROM : A40 Port ROM
2.Patch file: Patch File
Big thanks to testers:
1. @MiyamuraNEET
2. @zan
3. @MinatoNamikaze
4. @bravo
Ping me if I left anyone out
https://imgur.com/a/LiLlgwx
KERNEL SOURCE: https://github.com/akhil1999/android_kernel_samsung_m30lte​

Reserved 1 for Changelogs

Awesome! Keep it up x)

el0xren said:
Awesome! Keep it up x)
Click to expand...
Click to collapse
Thank you bro!

Awesome work Man!!!

Great work man!

@cha0scl0wn Great job bro! It is a pleasure working with you to bring OneUI 3.1 Port to M30. Looking forward to work on more future projects with you.

I installed this Rom. Everything worked fine but somehow my samsung bootlogo changed to hutchison 3 bootlogo. Now I can't get back samsung logo. Don't know which partition it got saved in.
(Edit: Found & replaced files in the location. It's inside omr partition. omr/res/media. The rom is from Ireland so maybe in India it pushes those boot logo qmgs in that directory itself when you setup your device for first time.)

@Akhil99 Very Very good work and Keep it up ..

pradipkamu said:
Installed and Very Smooth ROM but having few Problems faced till Date.
1) Hotspot Not Working
2) Bluetooth Pairing needs Every time
3) Very low Call volume
4) Adaptive brightness not working
5) Camera Not working
Anybody faced these issues.
@Akhil99 Very Very good work and Keep it up ..​
Click to expand...
Click to collapse
Yes, I noticed that. Also, there is no always on display. I rooted and tried to push Aod in system/priv-app but magisk is not working properly in this rom. Tried magisk v22 stable and canary but rooting doesn't work properly. Maybe we have to wait for sometime for new magisk version.

akhil093 said:
I installed this Rom. Everything worked fine but somehow my samsung bootlogo changed to hutchison 3 bootlogo. Now I can't get back samsung logo. Don't know which partition it got saved in.
(Edit: Found & replaced files in the location. It's inside omr partition. omr/res/media. The rom is from Ireland so maybe in India it pushes those boot logo qmgs in that directory itself when you setup your device for first time.)
Click to expand...
Click to collapse
Yes this is using an Ireland Product package. You might encounter some branding popping up. Will be taken care of .

pradipkamu said:
Installed and Very Smooth ROM but having few Problems faced till Date.
1) Hotspot Not Working
2) Bluetooth Pairing needs Every time
3) Very low Call volume
4) Adaptive brightness not working
5) Camera Not working
Anybody faced these issues.
@Akhil99 Very Very good work and Keep it up ..​
Click to expand...
Click to collapse
1.Hotspot not working at all? Please send me logs, I will take care of it.
2.I never faced slow Bluetooth pairing, was fine for me.
3.Very low Call Volume, none of the 4 testers reported this, check your earpiece speaker and get it replaced.
4.Adaptive brightness is a part of Samsung Camera Framework, might never work due to Samsung Camera issue.
5.Use OpenCamera or any other app for regular clicking pics and video capture. Read the telegram changelog once before reporting bugs, I have clearly mentioned the Samsung stock camera app is NOT working.

akhil093 said:
Yes, I noticed that. Also, there is no always on display. I rooted and tried to push Aod in system/priv-app but magisk is not working properly in this rom. Tried magisk v22 stable and canary but rooting doesn't work properly. Maybe we have to wait for sometime for new magisk version.
Click to expand...
Click to collapse
A40 does not have AOD feature. Pushing only the apk does not work, it needs some more files.
Since I am shipping a permissive kernel which magisk is known to have issue with rooting might cause some unknown issues.
An enforcing kernel should fix this, will be released soon.

neel0210 said:
Awesome work Man!!!
Click to expand...
Click to collapse
Thanks senpai, means a lot coming from you.

Astrako said:
Great work man!
Click to expand...
Click to collapse
Thank you sir, I wish to see more amazing work from your side. Your contribution to Samsung devices is unparalleled.

Cant download rom

Once again bro....this is probably the best Android 11 ROM available for this device.... previously I used turbo A7 port...which was perfectly working , the only problem with that was it was android 10..but this ROM brought android 11 stable performance...with minimum bugs..till date I have noticed only one bug ....since u have already mentioned abt the camera issue....I haven't come across any othe bug so far....
Once again, Thanks a lot
Looking forward ,
Best regards..

70011119039 said:
Once again bro....this is probably the best Android 11 ROM available for this device.... previously I used turbo A7 port...which was perfectly working , the only problem with that was it was android 10..but this ROM brought android 11 stable performance...with minimum bugs..till date I have noticed only one bug ....since u have already mentioned abt the camera issue....I haven't come across any othe bug so far....
Once again, Thanks a lot
Looking forward ,
Best regards..
Click to expand...
Click to collapse
Thanks for the feedback. Camera seems to be a dead end, let's see what happens.
Turbo A7 Port is old now, so ported A40 R A11 haha, new roms coming, keep an eye out for them
Enjoy the ROM!

akhil093 said:
Instalei esta Rom. Tudo funcionou bem, mas de alguma forma meu bootlogo samsung mudou para hutchison 3 bootlogo. Agora não consigo voltar o logotipo da Samsung. Não sei em qual partição ele foi salvo.
(Editar: arquivos encontrados e substituídos no local. Está dentro da partição omr. Omr / res / media. O rom é da Irlanda, então talvez na Índia ele empurra aqueles qmgs do logotipo de inicialização naquele diretório quando você configura seu dispositivo pela primeira vez. )
Click to expand...
Click to collapse
How to download archive bootsamsung.qmg stock? you have link?

Akhil99 said:
1.Hotspot não está funcionando? Por favor, envie-me os logs, eu cuidarei disso.
2. Eu nunca enfrentei o emparelhamento Bluetooth lento, foi bom para mim.
3. Volume de chamada muito baixo, nenhum dos 4 testadores relatou isso, verifique o alto-falante do fone de ouvido e substitua-o.
4. O brilho adaptativo faz parte do Samsung Camera Framework e pode nunca funcionar devido a problemas com a câmera Samsung.
5. Use OpenCamera ou qualquer outro aplicativo para clicar regularmente em fotos e captura de vídeo. Leia o changelog do telegrama uma vez antes de relatar bugs, eu mencionei claramente que o aplicativo da câmera Samsung NÃO está funcionando.
Click to expand...
Click to collapse
Hostpot working!!!