I was getting "Failed to boot 2 starting RSD mode" error and when my Atrix tried to reboot to install the OTA update. The only way I could get to boot again was to remove the battery and put it back, and after that, it boots normally to the home screen, and after the SD card gets mounted it shuts down to try to install the OTA update and you get the same error again.
I got it working again by following the suggestions from Atrixforums.com. What I did was to flash my phone with RDS lite v5.6 using the file 1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011 and that fixed my phone and it’s been working normally.
If you can get your phone to the home screen without rebooting or you get a different type of error, you could try the Automated Update (PC Users Only) from Motorola website (I need confirmation if this would work with a unlocked bootloader)
Details:
My phone was using the stock rom version 2.3.4
Rooted (I did not remove the root access before applying OTA 4.5.141 and this is reason why I got in this problem)
Locked bootloader (I am not sure if this would work with unlocked bootloader)
Unlocked sim card
I hope it helps,
Already posted in Dev section:
Warning 1
Warning 2
Search before posting :>
Alaq said:
Already posted in Dev section:
Warning 1
Warning 2
Search before posting :>
Click to expand...
Click to collapse
Those threads reference problems with unlocked phones. The OP has a rooted phone that is not unlocked. So, not a dupe per se.
That said, I upgraded my rooted-only phone with no issues. I rather suspect the OP may have unlocked his bootloader and forgotten about it.
You can OTA 141 with a locked and rooted phone. Just be sure to unroot (you need to do this manually if you ever used the fastboot preinstall method) and make sure everything is back to stock. If you used oneclick or any other root method that has an unroot, manually verify it really removed everything (su, superuser.apk, etc).
gnahc79 said:
You can OTA 141 with a locked and rooted phone. Just be sure to unroot (you need to do this manually if you ever used the fastboot preinstall method) and make sure everything is back to stock. If you used oneclick or any other root method that has an unroot, manually verify it really removed everything (su, superuser.apk, etc).
Click to expand...
Click to collapse
I have used the one click easy method only and nothing else. And I agree with you, it seems that not unrooting your phone before the OTA update creates this problem. I’ll be more careful the next time when the ICS it’s available.
I just want people like me that it’s not been in the android scene for long, do not get in to this kind of problems.
It would probably be a good idea to post a check list every time a new update comes up, reminding us of the precautions that we must have. Because even if you know what you are doing If you forget just one little change you made it could lead to some problems.
Greetings,
btw, here is what I did to unroot prior to the 141 update. I rooted 2.3.4 with the fastboot preinstall method...no idea if this unroot method cleans up the one click method.
link
1. Open Android Terminal Emulator
2. Type in the following commands, hitting ENTER after each line of code: (after typing 'su' below, look for the Superuser request and approve it, you can only continue if you get the # prompt.
Code:
su
mount -o rw,remount /dev/block/mmcblk0p12 /system
mount -o rw,remount /dev/block/mmcblk0p17 /preinstall
rm /system/bin/su
rm /preinstall/sqlite3
rm /preinstall/dosu
rm /preinstall/Superuser.apk
rm /preinstall/su
reboot
3. Let the phone reboot fully and then go into Settings > Applications > Manage Applications > find Superuser and uninstall it just like any other app.
Click to expand...
Click to collapse
I am was also facing the same issue with OTA. I finally managed to update my rooted, locked phone via USB method using Motorola Software Updater.
Root is lost after the update.
I did the OTA on my atrix which was locked and rooted. Updated fine without any problems, but I did lose root. Can't figure out which method is safe to use to re-root.
http://www.android-advice.com/2012/root-the-motorola-atrix-4g-running-4-5-141/
k00ey said:
I did the OTA on my atrix which was locked and rooted. Updated fine without any problems, but I did lose root. Can't figure out which method is safe to use to re-root.
Click to expand...
Click to collapse
live4nyy said:
http://www.android-advice.com/2012/root-the-motorola-atrix-4g-running-4-5-141/
Click to expand...
Click to collapse
I used this method and it worked fine. It did give an error message that superuser was already installed but it rooted the phone anyway.
Sent from my MB860 using Tapatalk
live4nyy said:
http://www.android-advice.com/2012/root-the-motorola-atrix-4g-running-4-5-141/
Click to expand...
Click to collapse
Thank you! Worked great.
charlyee said:
I used this method and it worked fine. It did give an error message that superuser was already installed but it rooted the phone
Click to expand...
Click to collapse
Charlyee, did you unroot your 4G with the preinstall method prior to following these instructions? Please confirm. Thanks!
badnokia said:
Charlyee, did you unroot your 4G with the preinstall method prior to following these instructions? Please confirm. Thanks!
Click to expand...
Click to collapse
I did the root saver method but I had all kinds of problems doing the OTA, so I ended up by downloading the software from the Moto website via USB.
At that point my Atrix was unrooted, but I don't know if it was the root saver method or download of the software.
I tried Motofail to root as well but that didn't work.
Hope that helps.
Sorry, didn't mean to write a thesis in answer to a simple question.
Sent from my MB860 using Tapatalk
Is it safe to use the aRoot unroot method if my Atrix is rooted and unlocked in order to update to 4.5.191?
Confirmed Success: Unroot, OTA Update, Root
Sorry if this info is redundant, but I'm super paranoid about the OTA updates & wanted to confirm what I did worked for my rooted, but locked Atrix 4G:
1) Unrooted with the directions on this page: http://www.atrixforums.com/forum/mo...ons-including-stock-locked-2-3-4-2-3-6-a.html
2) Ran OTA update
3) Rooted again with the following instructions: http://www.android-advice.com/2012/root-the-motorola-atrix-4g-running-4-5-141/
I just did sucessful update on my unlocked and rooted Motorola Atrix 4G (MB860) from 2.3.4 to 2.3.6 via RSDLite 5.6, and 1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf SBF file.
Windows 7 64-bit Ultimate. Everything passes O.K.
I had this happen on my atrix rooted no unlocked bootloader I reflashed with the above method nd success. I unrooted my wife's atrix first and installed the ota with no problems. So unroooting first seemed to work.
Sent from my MB860 using XDA App
I did not have a problem at all updating to 4.5.141 with a rooted phone minus the fact I lost root until I saw the link live4nyy posted.
Just an FYI for others like me that have been waiting to pull the trigger on the update.
I was rooted with the /preinstall (briefmobile) method (had never unlocked the bootloader). I read conflicting reports on whether OTA would work, and for some reason I couldn't get the Motoroloa update program to see my phone. Rather than figuring out why it wasn't seeing my phone, I did the "unroot" steps listed by gnahc79 in this thread and then let the phone update OTA and then rooted again using the /preinstall method.
The whole process took about 30 minutes, most of that was the OTA download and install.
Did you guys have to re-hack mobile hotspot after the OTA update?
Sent from my Motorola 2-way pager
Related
Hi,
Thanks in advance for anyone who tries to help me.
A few weeks ago I tried to gain root access to HTC Eris. I followed the prereq and part one of the guide but stopped there. Rebooted my phone, checked the version (2.1) and went about reinstalling apps and such.
Now I want to install a different ROM so I went back and tried to start from the beginning and put PB00IMG.zip on my phone, went to hboot, let run but then I get the message "Main Version is older! Update Fail! Do you want to reboot device?"
So when I move onto III in the walk through, I get an error on the command
adb push flash_image /system/bin
It would seem like I've lost root right? Is there anyway I can check to see if I accidentally installed the leak w/o root?
Thanks,
Nate
Easy way is to do
adb shell
if the prompt is
$
your likely on leak
if the prompt is
#
your on root.
Once your on root, flash recovery.
I am anticipating the next question, so here is your answer. If you did indeed root your phone, you should have loaded a recovery image as jcase mentioned.
First, load the new ROM onto the root of your sd card. Next, power off your phone. Then, hold down the vol up button and turn on your phone. It should boot into the recovery console. From here to load another ROM, you need to perform a wipe and then load your new ROM by flashing. You should see a Wipe and Flash from Zip menu option in recovery.
In the Wipe menu, choose the first two options in order (factory reset and cache). Wait for each to complete. Next, pressing vol down should get you back to the main menu. From here choose Flash from Zip and then select the ROM zip file you loaded onto your sd card and wait for the update to complete. Last, reboot your phone from the menu.
jcase said:
Easy way is to do
adb shell
if the prompt is
$
your likely on leak
if the prompt is
#
your on root.
Once your on root, flash recovery.
Click to expand...
Click to collapse
$
When you say "likely" you pretty much mean "sorry but you're non-rooted and I don't want to be the one to tell you" ?
xnatex21 said:
$
When you say "likely" you pretty much mean "sorry but you're non-rooted and I don't want to be the one to tell you" ?
Click to expand...
Click to collapse
You have 2.1 from the OTA, or on phone at purchase or from an image you flashed?
try su
xnatex21 said:
$
When you say "likely" you pretty much mean "sorry but you're non-rooted and I don't want to be the one to tell you" ?
Click to expand...
Click to collapse
adb shell
$ su
If you still have a $ then you most "likely" loaded a leak rather then root. If you get a # then you are in luck.
I don't remember if the the leak that included su had adb set to root by default.
good luck.
jcase said:
You have 2.1 from the OTA, or on phone at purchase or from an image you flashed?
Click to expand...
Click to collapse
I followed a guide a few weeks ago that must have been for the leaked version of 2.1.
thisismyanonymousaccount said:
adb shell
$ su
If you still have a $ then you most "likely" loaded a leak rather then root. If you get a # then you are in luck.
I don't remember if the the leak that included su had adb set to root by default.
good luck.
Click to expand...
Click to collapse
I get
su: permission denied
Click to expand...
Click to collapse
I guess that means my phone I'm stuck with it...FML!
xnatex21 said:
I guess that means my phone I'm stuck with it...FML!
Click to expand...
Click to collapse
Yes, sadly you are now stuck with the Leak.
Stay tuned as the devs are still working on it.
g00gl3 said:
Yes, sadly you are now stuck with the Leak.
Stay tuned as the devs are still working on it.
Click to expand...
Click to collapse
Does anyone know what HTC says about all of this? Can I send the phone back to them and have them "restore" the phone to factory settings?
xnatex21 said:
Does anyone know what HTC says about all of this? Can I send the phone back to them and have them "restore" the phone to factory settings?
Click to expand...
Click to collapse
Technically, modifying your device would void warranties. Even if they could "restore" the device, it would still have the newer bootloader that is causing the rooting issue. Some people have "lost" or "broken" the device bad enough that they could get a replacement from Verizon. However, there is mixed results as to what bootloader the refurbished devices come back with.
I posted before about the safety of re-rooting my eris from 1.5 to a rooted 2.2 rom, and due to lack of responses on any forums over the web, I jumped the gun today. First off my Eris after un-rooting it, wouldn't take the OTA update for 2.1, it downloaded and verified that, but after it rebooted, it was still at 1.5 saying no new updates are available. I cannot download the eris 1 click root app as it's only for 2.1 I'm assuming because it says it's not compatible with 1.5 firmware when I download it. I tried to follow this guide [Walkthrough] From stock (1.5) to rooted 2.1 (update - new link) - xda-developers and when I installed the PB00IMG.zip it downloaded but failed to flash and the screen read "Main version is older". I tried this guide All-In-One Auto-Root Script - Page 4 - xda-developers and when it says it's flashing the root image, it goes straight to a screen with only two options "recovery" something and "fastboot". None of which are listed as options in the guides. I am just trying to root my 1.5 eris and flash the KaosFroyo V3 eris rom with Amon Ra's recovery image. Thanks if anyone can help my problem, or shed light on the situation! Sorry if there's been a fix to this problem already stated, I've desperately been browsing many forums and hundreds of replies to no avail. Thanks again.
It looks to me like you got a pretty reasonable answer to the same question over on Android Forums
bftb0
I recently rooted my atrix with superoneclick then i accidently updated then i belive i still had my root until i went to install a 3d theme then my phone crashed and wouldnt get past the at&t screen so i had to erase everything now on my phone i still have "super user" in my app draw but i cannot side load apps did i lose my root? what do i have to do to sideload apps again ? and i guess re root my phone
Yes i am a newb i am comming from IOS and an iPhone 4 please dont flame
If you updated, you mean 4.1.57, this is what I did to re-root when I lost mine after updating and SuperOneClick wouldn't work.
http://forum.xda-developers.com/showthread.php?t=1013931
Ok so i read that so basically i have to flash my phone back to default then root again?
Yeap, that's exactly what I did, but in that same thread, I think someone else outlined using aRoot to go over SuperOneClick.
Originally Posted by donbar85
I'm pretty new to Android (two weeks now), and want to ensure I don't end up with a bricked device, so I apologize for the 'noob' question here. I rooted with SuperOneClick. Has anyone else used this script successfully with that root method, or will it only be successful with aRoot?
Also, if I need aRoot, can I run it over top SuperOneClick, or would it be best to unroot, run aRoot (or let the script root) and then run the script?
I appreciate all the hard work I've seen done in these forums and appreciate any help anyone can offer.
---
Yes you may safely run aroot over superoneclick. Aroot is the recommended method because it cleans up a lot of things Superroneclick does.
----
Originally Posted by DJQ1212
Yes you may safely run aroot over superoneclick. Aroot is the recommended method because it cleans up a lot of things Superroneclick does.
Thank you both. I believe I will try running aRoot over my SuperOneClick root and then try out the script. Thanks again!
Click to expand...
Click to collapse
Yup the aRoot script is used in the GladiAtrix and possibly the GingerBlur rom as well. Either way. SOC is crap, not meant for atrix anyway. aRoot was written specifically for the Atrix. If you want to update to 4.1.57 read through the retain root thread over in atrix development.
after update, i can still see "su" installed in /system/bin/
I am unable to use it, getting permissioned denied message, any solutions ?
sam_t610 said:
after update, i can still see "su" installed in /system/bin/
I am unable to use it, getting permissioned denied message, any solutions ?
Click to expand...
Click to collapse
This has been explained many times. updating kills root, even though you still have superuser installed. to retain root you need to use the script in the development section when updating from 1.26 to 1.57. flash back to 1.26 and try again.
Here is the Droid Razr HD software update. I have not tested it as I use CM 10.1 and have no interest in going back to stock. I found it on www.droidrzr.com in a forum post then shared it on my dropbox account.
I posted it on my Dropbox account so not sure how long it will last until the link is gone:
https://www.dropbox.com/s/d2x9vutel4vnqmm/Blur_Version.9.16.6.XT926.Verizon.en.US.zip
It does "fix" the bootloader unlock exploit though
http://www.droid-life.com/2013/07/1...the-kernel-exploit-for-unlocking-bootloaders/
scoobaspeaz said:
Here is the Droid Razr HD software update. I have not tested it as I use CM 10.1 and have no interest in going back to stock. I found it on www.droidrzr.com in a forum post then shared it on my dropbox account.
I posted it on my Dropbox account so not sure how long it will last until the link is gone:
https://www.dropbox.com/s/d2x9vutel4vnqmm/Blur_Version.9.16.6.XT926.Verizon.en.US.zip
Click to expand...
Click to collapse
So, stock recovery to install this?
I would assume you would need to be 100% stock, including the recovery, to install this.
scoobaspeaz said:
I would assume you would need to be 100% stock, including the recovery, to install this.
Click to expand...
Click to collapse
hmm put it on my internal storage and its not found, I think stock recovery wants to see it on a sdcard.
If your boot loader is unlocked before the update, it should stay unlocked. You just will not be able to unlock with methods out there now.
Sent from my Razr HD using xda app-developers app
I received the OTA today on my Max HD. It was build 9.18.79.
Sent using xda premium
A few questions I haven't been able to find answers to (many threads have been started on this new update topic and I haven't found the answers I'm looking for yet):
1) I've heard that there are two versions of this update, 9.20.xx and 9.18.xx... Anyone know the differences yet? Is one version for phones that have been unlocked and the other for phones that are still locked? Is one version for XT925 and the other for XT926? I received the 9.18 version, I am rooted, unlocked, and have a XT926 phone.
2) Anyone with an already unlocked bootloader try and take the update? Do you remember which version of the update you took? Did it install correctly? Are you still unlocked?
3) Anyone that is rooted and unlocked try to take the update? Did it install correctly? Are you still rooted and unlocked after the update? Did you have to protect the root with either SuperSU or Voodoo OTA Root Keeper? If so, do you mind posting step-by-step instructions for protecting the root so the phone is still rooted after the update?
Thanks to all who can shed light on these questions!
LifeAsADroid said:
A few questions I haven't been able to find answers to (many threads have been started on this new update topic and I haven't found the answers I'm looking for yet):
1) I've heard that there are two versions of this update, 9.20.xx and 9.18.xx... Anyone know the differences yet? Is one version for phones that have been unlocked and the other for phones that are still locked? Is one version for XT925 and the other for XT926? I received the 9.18 version, I am rooted, unlocked, and have a XT926 phone.
2) Anyone with an already unlocked bootloader try and take the update? Do you remember which version of the update you took? Did it install correctly? Are you still unlocked?
3) Anyone that is rooted and unlocked try to take the update? Did it install correctly? Are you still rooted and unlocked after the update? Did you have to protect the root with either SuperSU or Voodoo OTA Root Keeper? If so, do you mind posting step-by-step instructions for protecting the root so the phone is still rooted after the update?
Thanks to all who can shed light on these questions!
Click to expand...
Click to collapse
There are 2 different versions, depends on what System version you have of 4.1.2 on the XT926 only. The 9.18.79 version would indicate that your Systems version is 9.16.6 if this is not correct DO NOT FLASH. I am Rooted/Unlocked, if you take the plunge you must OTA Rootkeeper/SuperSU backup SU, as the update breaks Root> IF there is no backup of SU with the latest binaries. If you lose Root, there are a couple of ways to Downgrade. A common problem for those of us Root/Unlocked the Update FAILs at the end. Most of the Update goes through, however the new Radio does not go through, as of right now if you Update and your Baseband is VANQUISH_BP_100730.081.64.09P then you have the OLD radio, the new Radio is VANQUISH_BP_100730.160.64.15P.
Between the 2 OTA's these should match-up as either 9.16.6 = 9.18.79 or 9.16.9 = 9.20.1
Thanks for the reply! A few more questions if you don't mind (would hate to do something wrong... like I did last time... luckily I was able to revert back to an original version and fix the install... sigh...):
4) With protecting root, I need the SuperSU Pro version, yes? To be able to use the survival mode, yes? Will Voodoo OTA Rootkeeper do the same thing? Is it possible to use both "to be sure"?
5) I have everything backed up with Titanium Backup. Should I bother getting the pro version and backing everything up using the cloud backup and hypershell? Or won't this matter since if root doesn't keep I won't be able to use Titanium Backup?
6) I also have performed the VZW Wireless Hotspot hack using SQLite. Am I going to have to undo the hack in order for the OTA update to work?
Thanks again for all your help!
Update - I decided to attempt the update and hope for the best. System update 9.18.79.xx updating from 9.16.6.xx.
I purchased the SuperSU Pro from the Play Store, and used the survival mode in SuperSU. I also used the Voodoo OTA Rootkeeper and protected root. I figured if one didn't work the other might... Voodoo worked to protect and re-install root access (not sure about SuperSU as I tried Voodoo first to restore root after the install).
I am unsure if the bootloader is still unlocked, but from what people have said there doesn't seem to be a reason to believe it is re-locked. I haven't tested it out to know for sure though.
It appears that the entire update installed correctly. No errors, and the baseband version was updated to the new radio (xxx.15P).
I did not undo the VZW Wireless Hotspot hack prior to installing the update.
Hopefully this post helps others out there.
My final question... what does updating the radio/baseband do exactly?
i need help! i tried installing the update but i forgot i had TWRP.. so the update did not got installed, i rebooted the phone, but the OS tried to install the update again and inmediatly reboot the phone in recovery again .. then from recovery i flashed liquid smooth rom but i got stuck in the boot animation... my big issue is that my power button is broken! now i cant reset the phone to enter in fastboot mode.. i cant do anything... now my battery is totally drained and i cant turn on the phone (my power button does not work).. i can plug the usb cable and the led turns green. but i dont see any more options
rodmc123 said:
i need help! i tried installing the update but i forgot i had TWRP.. so the update did not got installed, i rebooted the phone, but the OS tried to install the update again and inmediatly reboot the phone in recovery again .. then from recovery i flashed liquid smooth rom but i got stuck in the boot animation... my big issue is that my power button is broken! now i cant reset the phone to enter in fastboot mode.. i cant do anything... now my battery is totally drained and i cant turn on the phone (my power button does not work).. i can plug the usb cable and the led turns green. but i dont see any more options
Click to expand...
Click to collapse
My suggestion, let your phone charge a bit.
Once charged up, turn it on and get it into Fastboot. From there you can use the DROID RAZR HD UTILITY 1.21 (http://forum.xda-developers.com/showthread.php?t=2307439). In that utility option 1 will bring you back to complete stock ROM, option 2 will bring you back to a stock recovery. This will completely erase your phone.
This should at least give you a fresh functioning phone. If you want to try to keep your data or personal files, I'm not sure what you could load via fastboot to get yourself a functioning phone again (maybe just a kernel?).
As a side note, I used TWRP to load the update and my phone updated except the radios it seems. It sounds like the same thing happens with the stock recovery.
Lenny
KachowPow said:
There are 2 different versions, depends on what System version you have of 4.1.2 on the XT926 only. The 9.18.79 version would indicate that your Systems version is 9.16.6 if this is not correct DO NOT FLASH. I am Rooted/Unlocked, if you take the plunge you must OTA Rootkeeper/SuperSU backup SU, as the update breaks Root> IF there is no backup of SU with the latest binaries. If you lose Root, there are a couple of ways to Downgrade. A common problem for those of us Root/Unlocked the Update FAILs at the end. Most of the Update goes through, however the new Radio does not go through, as of right now if you Update and your Baseband is VANQUISH_BP_100730.081.64.09P then you have the OLD radio, the new Radio is VANQUISH_BP_100730.160.64.15P.
Between the 2 OTA's these should match-up as either 9.16.6 = 9.18.79 or 9.16.9 = 9.20.1
Click to expand...
Click to collapse
So any idea how one might fix this?
LifeAsADroid said:
A few questions I haven't been able to find answers to (many threads have been started on this new update topic and I haven't found the answers I'm looking for yet):
1) I've heard that there are two versions of this update, 9.20.xx and 9.18.xx... Anyone know the differences yet? Is one version for phones that have been unlocked and the other for phones that are still locked? Is one version for XT925 and the other for XT926? I received the 9.18 version, I am rooted, unlocked, and have a XT926 phone.
2) Anyone with an already unlocked bootloader try and take the update? Do you remember which version of the update you took? Did it install correctly? Are you still unlocked?
3) Anyone that is rooted and unlocked try to take the update? Did it install correctly? Are you still rooted and unlocked after the update? Did you have to protect the root with either SuperSU or Voodoo OTA Root Keeper? If so, do you mind posting step-by-step instructions for protecting the root so the phone is still rooted after the update?
Thanks to all who can shed light on these questions!
Click to expand...
Click to collapse
I tried to take the 9.18.79 update I protected the root (I'm not unlocked) before I did so I also temporarily un-rooted (I've always been told to do this before and update) Now I an no longer rooted and it can't find any SU binary codes. Gonna have to flash back to 9.6.16 and try it again I guess or stay on 9.6.16 in order to maintain root for now. If you find a solution please share.
IDroidThere4Iam said:
My suggestion, let your phone charge a bit.
Once charged up, turn it on and get it into Fastboot. From there you can use the DROID RAZR HD UTILITY 1.21 (http://forum.xda-developers.com/showthread.php?t=2307439). In that utility option 1 will bring you back to complete stock ROM, option 2 will bring you back to a stock recovery. This will completely erase your phone.
This should at least give you a fresh functioning phone. If you want to try to keep your data or personal files, I'm not sure what you could load via fastboot to get yourself a functioning phone again (maybe just a kernel?).
As a side note, I used TWRP to load the update and my phone updated except the radios it seems. It sounds like the same thing happens with the stock recovery.
Lenny
Click to expand...
Click to collapse
I agree with Lenny. This same thing happened to me when I tried to take the liquid smooth ROM. Follow his instructions above. You'll lose all your pics, vids, files, etc. But at least you'll have a working phone again.
Went smoothly here
All my devices except this one are rooted and some are rom'd. I thought long and hard about whether to void this warranty but decided one day it would be out of updates from VZW and I would want to flash something. I have been denying the OTA for the last day so I figured now or never.
Here are the simple steps:
Download and install Moto device manager (for the USB drivers) here
Enable USB debugging in developer options on the phone
run motochopper here
run motoapocolypse here
install voodooOTA root keeper from Play and backup root
apply OTA
It went error free. The phone has the 15P radio update, unlocked BL and root.
larsdennert said:
It went error free. The phone has the 15P radio update, unlocked BL and root.
Click to expand...
Click to collapse
I want to confirm something, you unlocked the bootloader and then took the OTA and the bootloader remain unlocked (and stayed rooted due to root keeper)?
So the benefit to all this would be to get the new radio update?
bananapeapod said:
I want to confirm something, you unlocked the bootloader and then took the OTA and the bootloader remain unlocked (and stayed rooted due to root keeper)?
So the benefit to all this would be to get the new radio update?
Click to expand...
Click to collapse
Yes, the bootloader won't get locked again after it is unlocked. Moto would be shooting themselves having to reinstate warranties if they did that. Yes I wanted the option of flashing later becuase the ota will install sooner or later. I also want to stay on the upgrade path for now to have current radios.
I still have an Eris lying around that is long out of support but i have gb on it.
IDroidThere4Iam said:
My suggestion, let your phone charge a bit.
Once charged up, turn it on and get it into Fastboot. From there you can use the DROID RAZR HD UTILITY 1.21 (http://forum.xda-developers.com/showthread.php?t=2307439). In that utility option 1 will bring you back to complete stock ROM, option 2 will bring you back to a stock recovery. This will completely erase your phone.
This should at least give you a fresh functioning phone. If you want to try to keep your data or personal files, I'm not sure what you could load via fastboot to get yourself a functioning phone again (maybe just a kernel?).
As a side note, I used TWRP to load the update and my phone updated except the radios it seems. It sounds like the same thing happens with the stock recovery.
Lenny
Click to expand...
Click to collapse
that's what i want to do, but i cant because my power button is broken! so i cant enter to fastboot mode without the power button.. i will have to open my phone and try to fix the power button myself.
Just to make a point and to clear up any confusion, this Update will not lock the Bootloader. If you have an Unlocked Bootloader then you will have an Unlocked Bootloader after the update, regardless if it fully works or not, and even if you lose Root, the Bootloader will still be Unlocked. If Root is lost with an Unlocked Bootloader, I suggest downgrading through an FXZ of either 9.16.6 or 9.16.9 and restore Root.
Hey all. I have a rooted D800 (AT&T variant) with stock recovery and on firmware version D80010q. I am trying to update to the KitKat, but It's giving me an error every time I download and try to update. The error is: Err: 0x1111004. When the phone reboots, it says "This device is suspected in rooting. Software update is not available for rooted device".
I have tried using OTA rootkeeper to temporarily unroot, but it doesn't seem to work. Is there any way for me to get the update without having to flash back to stock?
This is my problem too. Hopefully there is a way.
Sent from my LG-D800 using xda app-developers app
Maybe doing a factory reset from stock recovery?
Sent from my LG-D805 using xda app-developers app
rohan611 said:
Hey all. I have a rooted D800 (AT&T variant) with stock recovery and on firmware version D80010q. I am trying to update to the KitKat, but It's giving me an error every time I download and try to update. The error is: Err: 0x1111004. When the phone reboots, it says "This device is suspected in rooting. Software update is not available for rooted device".
I have tried using OTA rootkeeper to temporarily unroot, but it doesn't seem to work. Is there any way for me to get the update without having to flash back to stock?
Click to expand...
Click to collapse
Its due to the custom recovery you have on it..Go back to stock dont root and update...maybe try root keeper to see if that can help
antawnm26 said:
Its due to the custom recovery you have on it..Go back to stock dont root and update...maybe try root keeper to see if that can help
Click to expand...
Click to collapse
nope. as i said in the OP< i have a stock recovery.
rohan611 said:
nope. as i said in the OP< i have a stock recovery.
Click to expand...
Click to collapse
then try root keeper it will disable root but back up root path and reinstate it once the update is done
antawnm26 said:
then try root keeper it will disable root but back up root path and reinstate it once the update is done
Click to expand...
Click to collapse
as i said in the OP...I tried root keeper to temporarily unroot and it didn't work. I'm going back to stock and going from there.
rohan611 said:
as i said in the OP...I tried root keeper to temporarily unroot and it didn't work. I'm going back to stock and going from there.
Click to expand...
Click to collapse
lol..yeah i read each statement in your OP just wanted to get to that last part of you saying your going back to stock and going from there, because thats your next option....
Let us know if you went back to stock then did the update and it worked.
I've read that some people kept root through their OTA. Why are some people able to update and others aren't. I've been reading up on this for the VZW update whenever that happens. I hope I haven't kept all this bloatware on my phone for no reason!!
Sent from my VS980 4G using Tapatalk
hinduboy74 said:
Let us know if you went back to stock then did the update and it worked.
Click to expand...
Click to collapse
I reverted back to stock using the instructions in the Stickied post. I was then able to update to D80010o. I had to call to request a rep to push out the D80010q update again though. They're calling it a "security update" so you should use that phrase when talking to the rep so that they don't get confused and think that you're just requesting that they push out the KitKat update.
Once I got the D80010q update, the KitKat update was available and I was able to update. Unfortunately, I didn't try to root it prior to updating - though to be honest, I don't really feel the need to root anymore. Only reason I had it rooted before was to get the multitasking button, but I'm okay with using an S3 layout (Menu, Home, Back) since that's the phone I'm coming from.
I have posted this in Other thread too.. may be this helps (Or save some time)
1.What ever the phone came with (never saw the version)
2. Rooted: Then just froze the apps I don't need (DID NOT DELETE) NO Exposed Or anything fancy. PURE STOCK just at&T bloat froze.
3. Then the Silent update came... I guess it was 10q (few weeks back), It was fine... ROOT remained.
4. Kitkat update came..
5. I de-froze all the apps before the update..
6. Tried to installed KITKAT after download... (After 1 of 2) it says Err: 0x111004
Once booted it said this update is not for rooted device. (or something similar)
7. I thought may be it recognized SuperSU/Super USer so I Uninstalled (Removed complete ROOT through the app) Download again the Kitkat.. Same ERROR And SAME message. I went it Recovery (Button combo) to complete wipe (Noticed RED Rooted below on the screen on Recovery) did the complete wipe and Still No Luck.
8. Go back to Complete stock through flash method as I realized ROOTED written on recovery so no wipe will help that...
9. chat with AT&T asked them to push 10q the silent updated.
10. once it was done I asked her if she can push Kitkat too.. she did.
The only thing was lost all the data in the process.. But I kept my pic's Auto backup through g+ so they are safe.. rest everything I lost which I don't care anyway. (Chat etc)
SO the BOTTOM LINE IS... If you see ROOTED on your stock recovery NO matter what you do... It will not update. If you dont see it.. then your are fine I Guess ("I guess" is the keyword)
Edit:
Also I'm not sure if there are 2 versions of root methods... So if anyone has Root and was able to update to kitkat.. Can you link which Root method you guys used.. Thanks in advance.
streetsmart999 said:
Also I'm not sure if there are 2 versions of root methods... So if anyone has Root and was able to update to kitkat.. Can you link which Root method you guys used.. Thanks in advance.
Click to expand...
Click to collapse
I used ioroot to root while on D80010d. I think some people who have had success rooted while on D80010o
rohan611 said:
I used ioroot to root while on D80010d. I think some people who have had success rooted while on D80010o
Click to expand...
Click to collapse
That is correct. I was on D80010o all four times I updated to Kit-kat and kept root everytime.
streetsmart999 said:
1.What ever the phone came with (never saw the version)
2. Rooted: Then just froze the apps I don't need (DID NOT DELETE) NO Exposed Or anything fancy. PURE STOCK just at&T bloat froze.
3. Then the Silent update came... I guess it was 10q (few weeks back), It was fine... ROOT remained.
4. Kitkat update came..
5. I de-froze all the apps before the update..
6. Tried to installed KITKAT after download... (After 1 of 2) it says Err: 0x111004
Once booted it said this update is not for rooted device. (or something similar)
7. I thought may be it recognized SuperSU/Super USer so I Uninstalled (Removed complete ROOT through the app) Download again the Kitkat.. Same ERROR And SAME message. I went it Recovery (Button combo) to complete wipe (Noticed RED Rooted below on the screen on Recovery) did the complete wipe and Still No Luck.
8. Go back to Complete stock through flash method as I realized ROOTED written on recovery so no wipe will help that...
9. chat with AT&T asked them to push 10q the silent updated.
10. once it was done I asked her if she can push Kitkat too.. she did.
The only thing was lost all the data in the process.. But I kept my pic's Auto backup through g+ so they are safe.. rest everything I lost which I don't care anyway. (Chat etc)
SO the BOTTOM LINE IS... If you see ROOTED on your stock recovery NO matter what you do... It will not update. If you dont see it.. then your are fine I Guess ("I guess" is the keyword)
Edit:
Also I'm not sure if there are 2 versions of root methods... So if anyone has Root and was able to update to kitkat.. Can you link which Root method you guys used.. Thanks in advance.
Click to expand...
Click to collapse
Same thing happened to me. I followed your advice in the other thread and did a reset using the LG flash tool, following rootjunky's guide on youtube and using the files from his website. Everything went smoothly except for at the end I got the same check flag error thing, but it completed the reset perfectly.
I then chatted with ATT and had him push the update to my phone which brought me up to d80010o. It finally went through the update and didn't get me the root error. So I think I'm in the green now. He said that he didn't have an option to push the kit kat update to my phone but it told him to have me do it through the software update in the settings. Which I tried and it said it was up to date. But he said that since they roll out in batches my phone might just not be ready for it yet. I will keep trying though and I'm one step further than I was before. At least it let me update. Shout out to ATT though, chat service is on point.
Are the root methods too complicated/risky for you? This is a simple solution.
Start with: original droid maxx software (12.7.7 i believe) on Verizon
1. Install motoroot 1.0 (JCase's first root method from original development section), run it, and click root (that's click #1). Make sure everything's working, reboot a few times, use rootchecker to make sure you've got root. (note you won't have write protection off and there'll be a 10-15 sec delay after booting up before you have root). But hey, it's 1 click.
2. Take 1st Verizon OTA to the 4.2.2 with camera update (12.15.15 i believe). Root should survive. Check that it did with root checker.
3. Install the write protection no more from the moto x original development section on your computer. download android-sdk and make sure adb is working, make sure fastboot is working. connect your phone to your computer and run the "write protectoin no more" app on your computer (that's click #2).
That's it. Now I have write protection permanently off, and I have root. I didn't have to use cydia impactor and mess with a tricky update to 4.4 which if it doesn't work I couldn't go back to a rooted phone. I never had to fxz anything or restore anything to stock, or lose any of my data. I didn't have to pay a dime or give someone on ebay all my phone info.
Sure I'd like to have 4.4, but pretty happy with where I am and how easily I got here. And I've read a lot of people say "the root methods are too complicated" --- well this is pretty easy cause you're just using 2 packaged apps.
I've gotten a lot from this forum, and just thought I'd share. Please don't flame. I feel like this is the best compromise of features:effort for me.
It was really easy to put an unlock code into adb.
Sent from my XT1080 using Tapatalk
Piaband said:
It was really easy to put an unlock code into adb.
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
if i could unlock it when i had gotten it in august, sure. but it's too much effort to start over at this point. i have everything set up perfectly. never had to start over. also didn't want to pay for it and send my info to some stranger on the internet. anyway, moot point. good for you, but that option's not available for most people.
So does this work when your already updated to 4.4?
Sent from my XT1080 using XDA Premium 4 mobile app
No nothing roots 4.4 at this point.
vegasdgk said:
So does this work when your already updated to 4.4?
Sent from my XT1080 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No he basically just rewrote the instructions of how to root the original firmware.
akellar said:
No he basically just rewrote the instructions of how to root the original firmware.
Click to expand...
Click to collapse
I didn't rewrite it. No where are there instructions for getting root AND write protection off on the 4.2.2 camera update without 1 using command line commands AND 2 that network based program (called Cydia compactor I think). There's none of those complications here. Most people don't even realize 1 click root survives the camera update.
But you are right as to kit kat. I thought my title was clear that this is for jellybean though.
mistermojorizin said:
Are the root methods too complicated/risky for you? This is a simple solution.
Start with: original droid maxx software (12.7.7 i believe) on Verizon
1. Install motoroot 1.0 (JCase's first root method from original development section), run it, and click root (that's click #1). Make sure everything's working, reboot a few times, use rootchecker to make sure you've got root. (note you won't have write protection off and there'll be a 10-15 sec delay after booting up before you have root). But hey, it's 1 click.
2. Take 1st Verizon OTA to the 4.2.2 with camera update (12.15.15 i believe). Root should survive. Check that it did with root checker.
3. Install the write protection no more from the moto x original development section on your computer. download android-sdk and make sure adb is working, make sure fastboot is working. connect your phone to your computer and run the "write protectoin no more" app on your computer (that's click #2).
That's it. Now I have write protection permanently off, and I have root. I didn't have to use cydia impactor and mess with a tricky update to 4.4 which if it doesn't work I couldn't go back to a rooted phone. I never had to fxz anything or restore anything to stock, or lose any of my data. I didn't have to pay a dime or give someone on ebay all my phone info.
Sure I'd like to have 4.4, but pretty happy with where I am and how easily I got here. And I've read a lot of people say "the root methods are too complicated" --- well this is pretty easy cause you're just using 2 packaged apps.
I've gotten a lot from this forum, and just thought I'd share. Please don't flame. I feel like this is the best compromise of features:effort for me.
Click to expand...
Click to collapse
Hello,
I have rooted my phone when i am in 12.7.7, then i took the OTA update 12.15.15, now my device is in a boot loop, it boots normally and after a few seconds it will reboot and it goes over and over again.
any thoughts on this and should I use RSDLite to flash it to either 12.7.7 / 12.15.15???
-Zeta- said:
Hello,
I have rooted my phone when i am in 12.7.7, then i took the OTA update 12.15.15, now my device is in a boot loop, it boots normally and after a few seconds it will reboot and it goes over and over again.
any thoughts on this and should I use RSDLite to flash it to either 12.7.7 / 12.15.15???
Click to expand...
Click to collapse
which method did you use to root it? what system stuff did you change after rooting it?
a lot of people had bootloops after taking an OTA because they did the root method that had replaced their stock recovery with a write protect off mode. so in effect, they were having bootloops because they didn't have the recovery, not because they had root. it their case, there was an easy solution of just flashing a recovery. unfortunately i don't know the details of how to do that off the top of my head.'
in any case, rsd'ing to either of those software versions will likely fix all problems.
i rooted as i described with motoroot 1.0, which didn't affect my recovery and was easy to OTA without problems.
good luck
mistermojorizin said:
which method did you use to root it? what system stuff did you change after rooting it?
a lot of people had bootloops after taking an OTA because they did the root method that had replaced their stock recovery with a write protect off mode. so in effect, they were having bootloops because they didn't have the recovery, not because they had root. it their case, there was an easy solution of just flashing a recovery. unfortunately i don't know the details of how to do that off the top of my head.'
in any case, rsd'ing to either of those software versions will likely fix all problems.
i rooted as i described with motoroot 1.0, which didn't affect my recovery and was easy to OTA without problems.
good luck
Click to expand...
Click to collapse
Thanks for the quick reply,
I used the PwnMyMoto here to root, i forgot that this method will replace / remove the stock recovery.
With a minute of panic and some google search, I'd managed to use RSD lite to flash the 12.15.15 FXZ and now my phone is back in business but kinda lost root.
Right now I am looking into the RockMyMoto method here and see if it can help me to gain root.
-Zeta- said:
Thanks for the quick reply,
I used the PwnMyMoto here to root, i forgot that this method will replace / remove the stock recovery.
With a minute of panic and some google search, I'd managed to use RSD lite to flash the 12.15.15 FXZ and now my phone is back in business but kinda lost root.
Right now I am looking into the RockMyMoto method here and see if it can help me to gain root.
Click to expand...
Click to collapse
glad you got your phone back in order, might want to check out slapmymoto (which is the path to rooted kit kat and involves running rockmymoto on the way) while you're at it
mistermojorizin said:
glad you got your phone back in order, might want to check out slapmymoto (which is the path to rooted kit kat and involves running rockmymoto on the way) while you're at it
Click to expand...
Click to collapse
Not sure about the battery life on kitkat of the MAXX right now, so i will stick with 4.2.2 first and do a little research.
Anyway, thanks for the reply and I've gained root on 4.2.2 (12.15.15) using RockMyMoto:laugh: