Just in case you don't know. Looks lke there is a small problem with the caller ID. Carrier Devices (I-mates) have released a patch. I installed it and not a problem. Looks like other MDA/O2 devices might have the same problem but no offical release and don't think this patch works but for imates. Read the posts @
http://discuss.pocketnow.com/showth...511d51&threadid=14516&perpage=12&pagenumber=2
The patch download is here (large 10mb!)
http://www.imate.com/imate/files/Gitex_Update.cab
Here is the important part of the post.
Here is the tech support post.
Please download the patch from
http://www.imate.com/imate/files/Gitex_Update.cab. Please copy this file to the i-mate Pocket PC and run the file using File Explorer on the device. Backup or synchronize with your PC any data on the device.
Perform a Hard Reset by holding down the Power button while using the Stylus to press the small hole on the bottom left of the device. The Hard reset does erase all user data on the device, so backup or synchronies your device to your PC first to save your data.
Align the screen and perform the cut and past training, and set
the timezone. Then a list of operators settings should appear. Chose one and then accept the Arabic EULA. Let all the applications install, the device will reset automatically when this has been completed.
Actually it is related to the Country Code and Area Code. I have mine working. Goto Setting, Connection, Advanced and Select Location. Put the appropiate country code and area code and it should work well.
My XDA II Device Info:
ROM Version: 1.03.00 USA
ROM Date: 09/24/03
Radio Version: 10513A0
Protocol Version : 1337.13Q
Hi everybody, I am excited to say that I am getting an update "from Samsung" through Zune right now after having used the Chevron Updater! I will post with the details when it is finished.
I read your post. I decided to connect my focus that I too used the Chevron updater on, and I got the Samsung update as well. "Samsung update for Windows Phone"
It rebooted the phone, it changed Zune to the Windows Phone "update in progress" phone screen, it shows the computer connection graphic on the screen of the phone and it creates a backup on step 7 of 10.
Step 8 of 10 installs the updates.
It finishes and reboots. Success.
What's new after this "AT&T" update?
I heard:
(1) connects to AT&T hotspots automatically when near one.
(2) Camera's anti-shaking now defaults to ON.
Anything else?
you can now sync your contacts with your ATT address book also
I do see that anti-shaking is the default now but I don't see any applications or new settings in regards to these other features.
jonandkym said:
I do see that anti-shaking is the default now but I don't see any applications or new settings in regards to these other features.
Click to expand...
Click to collapse
go into App list, Settings, choose email & accounts, choose +add account. now you'll see an option to add your ATT Address Book.
as far as the WISPr auto connecting to a ATT hotspot..i see no options to be able to turn it off. unfortunately.
Used Chevron to get to NoDo, updated via Zune with the Samsung update. Here's the About:
OS Version: 7.0.7390.0
Firmware revision #: 2103.11.3.3
HW revision #: 3.1.0.7
Radio software version: 21.03.11.3.3
Radio HW version: 0.0.0.3
Bootloader ver: 5.3.1.6
Chip SOC ver: 0.36.2.0
I updated to nodo via Chevron7. After reading the steps to see about ATT Address book, I see I have that now. I thought that was going to come with the ATT NODO update. I also see the camera anti shake is default on.
How can I tell if the WISPr upfate is installed?
Just so I'm on the same page as everyone, installing the Samsung Update on a phone that already has NoDo added the AT&T NoDo features?
Yes, that is correct.
Sent from my SGH-i917 using XDA Windows Phone 7 App
Excellent. I'm in the middle of step 7 right now. I REALLY hope they eventually change the updating process to let you choose where to store the updates. I've finally witnessed the downside to my small SSD.
Hello,
I have a problem with Samsung SM-G355h.
When I enter in settings/storage or in any application details, system can't calculate how much storage that application occupies or any oder memory space beside available space (there's just calculate... where space amount should be). Besides that I can install apps but can't uninstall them (uninstalling is working but never finishes), there is no error massages. After a while phone just restarts.
I tried following things:
- wipe data and cash, reset to factory settings;
- I used Odin to install newer and older firmware (official);
but it is always the same.
Phone isn't rooted and has no custom rom in it.
If someone has idea what I can do more, his suggestion will be most welcome.
Phone software specifications:
Android version: 4.4.2
Baseband version: G355HXXU0AOB3
Kernel version: 3.10.17-5115844 [email protected] #2 Thu Jan 5 21:10:36 KST 2017
Build number: KOT49H.G355HXXS0AQA4
Security software version: ASKS v1.2_161011
Thank you for your attention
mladja27 said:
Hello,
I have a problem with Samsung SM-G355h.
When I enter in settings/storage or in any application details, system can't calculate how much storage that application occupies or any oder memory space beside available space (there's just calculate... where space amount should be). Besides that I can install apps but can't uninstall them (uninstalling is working but never finishes), there is no error massages. After a while phone just restarts.
I tried following things:
- wipe data and cash, reset to factory settings;
- I used Odin to install newer and older firmware (official);
but it is always the same.
Phone isn't rooted and has no custom rom in it.
If someone has idea what I can do more, his suggestion will be most welcome.
Phone software specifications:
Android version: 4.4.2
Baseband version: G355HXXU0AOB3
Kernel version: 3.10.17-5115844 [email protected] #2 Thu Jan 5 21:10:36 KST 2017
Build number: KOT49H.G355HXXS0AQA4
Security software version: ASKS v1.2_161011
Thank you for your attention
Click to expand...
Click to collapse
Go to recovery and try to clear cache
Hi everyone!
i need some help because the seller refuses to help and acts like he doesn't understand english. I am a car audio installer and the 4 radio is no longer working well. memory forgets radio settings when acc is connected, after 2 minutes, good for 1-2 days, dsp sound quality is pathetic and painful, only radio sound quality is good, usb, youtube, spotyfi, itunes, video and all other crap it says, no subwoofer setting and control option, developer mode cannot be entered via build number, device customization is not possible, menu access is limited, neither system nor mcu can be updated, many settings cannot be done. there is only a problem with the installation of the uis7862 processor!
Android 12
mcu: QF01.V01: 45: 20220818.011021
System: QF001.2022.08.18.225855
DSP: BD37534
Radio: TSC4745
Processor: 1.8 GHz x 8 - UIS7862A
Device Name: K706
Software version: ums512_q0_20211130
Hardware: QF001
Honestly, cut losses and replace with an FYT UIS7862 variant.
marchnz said:
Őszintén szólva, csökkentse a veszteségeket, és cserélje ki egy FYT UIS7862 változatra.
Click to expand...
Click to collapse
Thank you, What does FYT stand for? Unfortunately, I don't speak English, only google is my friend as a translator. What do you mean by exchange?
Mtxaudio said:
Thank you, What does FYT stand for? Unfortunately, I don't speak English, only google is my friend as a translator. What do you mean by exchange?
Click to expand...
Click to collapse
He said that you should buy a new one.
Today I received the UIS7860A update File a System and MCU from the manufacturer! The BD37534 DSP also works well and a lot of innovations and useful functions have been added.
Mtxaudio said:
Today I received the UIS7860A update File a System and MCU from the manufacturer! The BD37534 DSP also works well and a lot of innovations and useful functions have been added.
Click to expand...
Click to collapse
Same hardware here and same issues with sound quality.
Would you please share this update?
Thank you!
Mtxaudio said:
Today I received the UIS7860A update File a System and MCU from the manufacturer! The BD37534 DSP also works well and a lot of innovations and useful functions have been added.
Click to expand...
Click to collapse
Share it here for the benefit of XDA
1.Download the two firmware in your computer, they are <update.zip> and <MCU.bin> , please do not unzip them.
2.Copy the <update.zip> document into your Udisk root path. And copy the <MCU> document into your Udisk root path.
3.Connect your Udisk to our player, and then follow settings-general-system upgrade, and then it will upgrade itself, please do not cut the power during the upgrade. And the player will reboot itself. This step will take about 6 minutes.
4.When you finish upgrading the system, then follow settings-General-MCU Upgrade- select the upgrade file -Confirm, and it will upgrade itself. This step will take about 1 minute.
5.After upgrade all, we also need to activate the weather APK, please set your cellphone WiFi hotspot name as FYQP5QRG, and connect the player WiFi to your cellphone hotspot, and then it will activate the weather APK. When you are using an iPhone, please do not connect your iPhone Bluetooth to our player before you activate the weather APK, it is very important. After you activate the weather APK, you can connect your iPhone Bluetooth normally.
6.The MCU upgrade may lead to the touch screen and touch panel not working correctly, please use your five fingers to long touch the screen and go to calibration mode to adjust the touch screen. And about the touch panel please follow the steps settings-factory-8888-ok-touch learning button, in this way you can set it correctly.
7.After the upgrade, you need to set the correct CANBUS type if your car has CANBUS system ,please follow the steps settings-factory-8888 ok-car model
8.The firmware upgrade may lead to the Carletter APK not activated, please take the picture of QR code and send to us, we will activate it for you.
https://jitufirmware1128.oss-eu-central-1.aliyuncs.com/update.zip
https://jitu375344745mcu1126.oss-eu-central-1.aliyuncs.com/mcu.bin
Mtxaudio said:
1.Download the two firmware in your computer, they are <update.zip> and <MCU.bin> , please do not unzip them.
2.Copy the <update.zip> document into your Udisk root path. And copy the <MCU> document into your Udisk root path.
3.Connect your Udisk to our player, and then follow settings-general-system upgrade, and then it will upgrade itself, please do not cut the power during the upgrade. And the player will reboot itself. This step will take about 6 minutes.
4.When you finish upgrading the system, then follow settings-General-MCU Upgrade- select the upgrade file -Confirm, and it will upgrade itself. This step will take about 1 minute.
5.After upgrade all, we also need to activate the weather APK, please set your cellphone WiFi hotspot name as FYQP5QRG, and connect the player WiFi to your cellphone hotspot, and then it will activate the weather APK. When you are using an iPhone, please do not connect your iPhone Bluetooth to our player before you activate the weather APK, it is very important. After you activate the weather APK, you can connect your iPhone Bluetooth normally.
6.The MCU upgrade may lead to the touch screen and touch panel not working correctly, please use your five fingers to long touch the screen and go to calibration mode to adjust the touch screen. And about the touch panel please follow the steps settings-factory-8888-ok-touch learning button, in this way you can set it correctly.
7.After the upgrade, you need to set the correct CANBUS type if your car has CANBUS system ,please follow the steps settings-factory-8888 ok-car model
8.The firmware upgrade may lead to the Carletter APK not activated, please take the picture of QR code and send to us, we will activate it for you.
https://jitufirmware1128.oss-eu-central-1.aliyuncs.com/update.zip
https://jitu375344745mcu1126.oss-eu-central-1.aliyuncs.com/mcu.bin
Click to expand...
Click to collapse
worked! Thank you.
@ffontana @Mtxaudio just installed S1 ( 3GB/32GB ) version and having the same issues, seems my FW is even older than you had originally, would you know if my radio can be updated with your firmware above?
Android 12
mcu: QF01.V01: 45: 20220818.011021
System: QF001.20220817.221459
DSP: BD37534
Radio: TSC4745
Processor: 1.8 GHz x 8 - UIS7862A
Device Name: K706
Software version: ums512_q0_20211130
Build number: QF001.20220817.221459
Hardware: QF001
DDR: 3GB
FLASH: 32GB
got an January 2023 update from dealer on Alibaba, update went OK, radio is working, will see if it helped my problems
firmware: https://jitufirmware20230109.oss-eu-central-1.aliyuncs.com/update.zip
MCU: https://jitu375344745mcu20230103.oss-eu-central-1.aliyuncs.com/mcu.bin
1. download these two files. copy <Update.zip> and <MCU.bin> to the root directory of a formatted USB drive(FAT-32).
2. plug the U-disk into the unit. enter Settings-General-System Upgrade. the system upgrade will start automatically. the step takes about 6 minutes, please do not cut the power off during the process.
3. after upgrading the system, enter Settings-General-MCU Upgrade- select the upgrade file -Confirm to do MCU upgrade. the step takes about 1 minute.
vendo232 said:
[USER = 3060553] @ffontana [/ USER] [USER = 8250520] @Mtxaudio [/ USER] éppen telepítette az S1 (3 GB / 32 GB) verziót, és ugyanazokkal a problémákkal tűnik, hogy az FW még régebbi, mint eredetileg volt, tudod, hogy a rádióm frissíthető-e a fenti firmmal?
Android 12
mcu: QF01.V01: 45: 20220818.011021
Rendszer: QF001.20220817.221459
DSP: BD37534
Rádió: TSC4745
Processzor: 1,8 GHz x 8 - UIS7862A
Eszköz neve: K706
Szoftver verzió: ums512_q0_20211130
Építési szám: QF001.20220817.221459
Hardver: QF001
DDR: 3 GB
VILÁG: 32 GB
Click to expand...
Click to collapse
You can update it as described.
Mtxaudio said:
You can update it as described.
Click to expand...
Click to collapse
Hi, I also have the same problem, the seller has provided me with an update but it has created audio problems and problems with some applications. How can I fix it?
Versione del sistema: QF001.20220827.145315
Versione MCU: QF01.V01.47.20220830.001131
Android: 12
DPI: 1280 x 720
DSP: BU32107
Radio: TSC4745
Bluetooth: 5.0
UUID: 1002204081000536
vendo232 said:
got an January 2023 update from dealer on Alibaba, update went OK, radio is working, will see if it helped my problems
firmware: https://jitufirmware20230109.oss-eu-central-1.aliyuncs.com/update.zip
MCU: https://jitu375344745mcu20230103.oss-eu-central-1.aliyuncs.com/mcu.bin
1. download these two files. copy <Update.zip> and <MCU.bin> to the root directory of a formatted USB drive(FAT-32).
2. plug the U-disk into the unit. enter Settings-General-System Upgrade. the system upgrade will start automatically. the step takes about 6 minutes, please do not cut the power off during the process.
3. after upgrading the system, enter Settings-General-MCU Upgrade- select the upgrade file -Confirm to do MCU upgrade. the step takes about 1 minute.
Click to expand...
Click to collapse
hi the link doesn't work, can you send a working one?
hello everyone I have a problem with my s3 car radio, I updated with the firmware that the seller gave me, it only solved the memory problem etc., but now I have audio problems and problems with some applications.
firmware: https://jitufirmwarezlink20230306.oss-eu-central-1.aliyuncs.com/update.zip
MCU: https://jitu321074745mcu230207.oss-eu-central-1.aliyuncs.com/mcu.bin
this is the update i have installed, are there any other fixes?
Scofi003 said:
hello everyone I have a problem with my s3 car radio, I updated with the firmware that the seller gave me, it only solved the memory problem etc., but now I have audio problems and problems with some applications.
firmware: https://jitufirmwarezlink20230306.oss-eu-central-1.aliyuncs.com/update.zip
MCU: https://jitu321074745mcu230207.oss-eu-central-1.aliyuncs.com/mcu.bin
this is the update i have installed, are there any other fixes?
Click to expand...
Click to collapse
What kind of audio problems you have? Please elaborate and share details of your radio Hardware and Software revision after the update.
vendo232 said:
What kind of audio problems you have? Please elaborate and share details of your radio Hardware and Software revision after the update.
Click to expand...
Click to collapse
before this update the audio, was working fine nn grainy, the update is what i posted.
vendo232 said:
What kind of audio problems you have? Please elaborate and share details of your radio Hardware and Software revision after the update.
Click to expand...
Click to collapse
the weather application doesn't work after this update, the audio is degraded.
Scofi003 said:
the weather application doesn't work after this update, the audio is degraded.
Click to expand...
Click to collapse
I had the problem with audio as you explain and it got resolved in Jan. Update. If you flashed March update the problem should be resolved. Please list your HW/SW versions.
Android 12
mcu: QF01.V01.70.20221216.011021
System: QF001.20230109.190922_v3.08_01
DSP: BD37534
Radio: TSC4745
Processor: 1.8 GHz x 8 - UIS7862A
Device Name: K706
Software version: ums512_q0_20211130
Build number: QF001.20230109.190922
Hardware: QF001
DDR: 3GB
FLASH: 32GB
Where can I find the March update to fix it?