Related
Hi everybody, I am excited to say that I am getting an update "from Samsung" through Zune right now after having used the Chevron Updater! I will post with the details when it is finished.
I read your post. I decided to connect my focus that I too used the Chevron updater on, and I got the Samsung update as well. "Samsung update for Windows Phone"
It rebooted the phone, it changed Zune to the Windows Phone "update in progress" phone screen, it shows the computer connection graphic on the screen of the phone and it creates a backup on step 7 of 10.
Step 8 of 10 installs the updates.
It finishes and reboots. Success.
What's new after this "AT&T" update?
I heard:
(1) connects to AT&T hotspots automatically when near one.
(2) Camera's anti-shaking now defaults to ON.
Anything else?
you can now sync your contacts with your ATT address book also
I do see that anti-shaking is the default now but I don't see any applications or new settings in regards to these other features.
jonandkym said:
I do see that anti-shaking is the default now but I don't see any applications or new settings in regards to these other features.
Click to expand...
Click to collapse
go into App list, Settings, choose email & accounts, choose +add account. now you'll see an option to add your ATT Address Book.
as far as the WISPr auto connecting to a ATT hotspot..i see no options to be able to turn it off. unfortunately.
Used Chevron to get to NoDo, updated via Zune with the Samsung update. Here's the About:
OS Version: 7.0.7390.0
Firmware revision #: 2103.11.3.3
HW revision #: 3.1.0.7
Radio software version: 21.03.11.3.3
Radio HW version: 0.0.0.3
Bootloader ver: 5.3.1.6
Chip SOC ver: 0.36.2.0
I updated to nodo via Chevron7. After reading the steps to see about ATT Address book, I see I have that now. I thought that was going to come with the ATT NODO update. I also see the camera anti shake is default on.
How can I tell if the WISPr upfate is installed?
Just so I'm on the same page as everyone, installing the Samsung Update on a phone that already has NoDo added the AT&T NoDo features?
Yes, that is correct.
Sent from my SGH-i917 using XDA Windows Phone 7 App
Excellent. I'm in the middle of step 7 right now. I REALLY hope they eventually change the updating process to let you choose where to store the updates. I've finally witnessed the downside to my small SSD.
I had cm7.0.3 running ok with radio:
October 2010: Radio_12.28b.60.140e_26.03.02.26_M - HTC WWE 1.32.405.6
I followed the instructions here:
http://forum.xda-developers.com/showthread.php?t=896597
to flash recommended radio:
4th January 2011: Radio_12.28e.60.140f_26.04.02.17_M2_SF - HTC WWE 1.72.405.3 R2
I'm not sure if it was because I didn't wipe but everything since was very jerky and the device was unresponsive, therefore I reverted to an older ROM I had backed up. Now I have found that I no longer have a 2g/3g data connection, the phone just states "unknown" within my quicker app settings.
Does anyone know why I've had this problem, or better still any ideas how I can resolve?
Punch in *#*#4636#*#* into your keypad and head into Phone Information.
What info is displayed? You may need to type it all out.
Cool, thanks for this info.
Right I have followed your instructions and before I write everything out I have notice that at the bottom of the first menu (which is: Phone info) the "set preferred network type was set to "WCDMA preferred", am I right in saying I should change to "GSM only" or "GSM auto (PRL)?
Mine is set to WCDMA preferred and I get 2G/3G/H. Try it, you have nowt to lose at this point.
Ok, changing that doesn't seem to have worked. I lost regular phone signal.
Phone info for you:
IMEI: xxxx
phone number: unknown
current network: orange
signal strength: -99dBm 7 asu
location: LAC = c32 CID = c32adb2
neighbouring CID: no neighbouring cells
roaming: not roaming
GSM service: in service
GPRS service: Discountinued
network type: UMTS
message waiting: false
call redirect: false
call status: idle
radio resets: 0
data attempts: 0
data success: 0
GSM disconnects: =========DATA==========
State: DcInactiveState
disconnected with last try
at 12:59 AM
fail because No Error
PPP sent: 0 pkts, 0 bytes
PPP received: 0 pkts, 0 bytes
Number of PPP reset since boot: 0
Set preferred network type:
WCDMA preferred
Does this help you at all? Thanks, appreciating your support.
It does a bit. GPRS service reads "Discontinued". If you had disabled data on your phone it would read "Disconnected".
What I would do is try the same SIM card in another phone. If you cannot try that you can check your APN settings.
Settings > WiFi & networks > Mobile Networks > Access Point Names > check you have the correct settings.
I can't try the SIM card part until tomorrow.
Prior to leaving work today I did check my phones APN settings against a work mates (since he has an unrooted DHD) and they appeared correct. Both phones has two Orange UK (-orangeinternet) and Orange UK MMS (orangemms).
I removed the SIM and battery and then re-assembled.
I have been changing things and then checking, now it states the following (with regards to the list I provided you earlier):
Phone Number now appears
GPRS service now states disconnected
and the GSM disconnects still states:
=========DATA==========
State: DcInactiveState
disconnected with last try
at 12:59 AM
fail because No Error
PPP sent: 0 pkts, 0 bytes
PPP received: 0 pkts, 0 bytes
this is all with "WCDMA preferred"
I have also re-flashed with the radio that was previously in the phone (26.03.02.26), but still no data connection...
The only sure fire way to find out if its your setup is to run the 1.32 RUU and flash back to stock. If you get data then its your system / radio / RIL setup.
If you flash back to 1.32 you can be fully rooted / S-OFF / etc again in about 1 hour.
Ok, thanks for that.
Just to provide a little more detail:
I had to downgrade before rooting to CM7-RC4, then I moved to CM7-final, CM7.0.2 and then CM7.0.3 before I decided to upgrade my radio from 26.03.02.26 to 26.04.02.17.
This is when I hit my data problem.
Since then reverted to an older ROM backup and I have re-flashed different radio's to see if it would come back to life.
I have now applied the CM7.1 update (since I guessed I have nothing to lose).
Tomorrow I will try and make time to drop to 1.32 RUU.
Am I right in saying the RIL is the tie-in between the software and the radio? It sounds like this might be my problem now?
I'll need to research the procedures to do what you suggest since I'm still pretty new to all this...
Thanks again, I'll let you know how I get on.
Yes you are correct the RIL sits between the Radio and software.
An incorrect RIL could be the cause. Have you tried flashing the recommended RIL?
Ok, thanks.
I have some time now to play with this, would you happen to know if it matters which order I do this in?
radio, RIL, then ROM?
Sorry for that, I found the answer to my own post, RIL last!
I have now re-flashed radio:
Radio_12.28g.60.140f_26.05.05.27_M3
and then applied RIL (using ROM Manager):
HTC-RIL_2.2.0099HM
Still had no joy.
Ran the 1.32.exe application to return to stock (it informed me that it was changing 2.36.405.8 to 1.32.405.6) and my data has returned! My voicemail icon has returned too!
Would be ace to have these with CM7!
Any suggestions on the quickest and more reliable way to get to CM7?
1. flash newer radio
2. test vm & data connection
3. flash cm7
Just to let you know that after flashing radio vm and data still worked and then going onto cm7.0.3 my data still works - fixed! Although, I have lost my voicemail Still happy though, thanks for your suggestions.
Updated 03/14/2012 FrankenTAB v1.1.0
FrankenTAB aims to pick up where the gtab-devs left off with the Froyo based VEGAn-TAB 1.00 b5.1.1 (our v001a is a direct port of b5.1.1 to BL 1.2 with a clemsyn kernel). The current build is a heavily modified Brilliant Corners 1.3.1 base (advanced version of VEGAn-TAB 1.00 b5.1.1), with an overclockable (1.6ghz) & undervoltable kernel from the Clemsyn universal Froyo Skype Fix.
1) This MOD is based on Roebeets' Brilliant Corners ROM for the GTablet. See the description for Brilliant Corners for more info.
2) I am using the latest kernel and WIFI drivers (Skype/SOD/PPP fixes) from Clemsyn, all thanks for the speed of this ROM should go to him.... not me. This ROM is overclockable (to 1.6Ghz) and undervoltable via SetCPU (Get it from XDA if you are a member, or from the market if you want to support the developer)
3) Jcp171, Cobey, and Sharpe351 have been a huge help to me with FrankenTAB. Much thanks goes out to them for their continued help and support.
4) I got the blessing from GoJimi to include the newest version of VTL Launcher in our rom (v1.7.5 - This is NOT on the market yet). I would suggest that you drop in over at http://vegantab.gojimi.com/ to see what's going on with the OFFICIAL VEGAn-TAB ROM, which is based on GINGERBREAD, and show your support for further development of VTL Launcher by purchasing the release version from the Android Market or via a donation on the VT-Labs / VEGAn-TAB website.
INSTALLATION NOTES:
Before attempting to install this ROM, please understand how to use NVFlash (Roebeets thread) to restore your system should something go wrong.
You will ABSOLUTELY need to do a data wipe / factory reset with CWM BEFORE install. I also recommend formatting your sdcard and wiping the dalvik cache before install. my current procedure is:
1) NVFlash to version a 1.2 bootloader base image including CWM
2) Perform my wipes in CWM (data / cache / Dalvik / Format SD)
3) Mount the Tablet via USB from inside CWM / Copy all the needed files to the tablet
4) Install the Rom in CWM
5) Reboot
In more extreme cases a tougher wipe may be necessary:
0) MAKE BACKUPS OF WHAT YOU WANT TO KEEP
1) boot into CWM and format your sd card to 4096/0 then back to 2048/0 (this has cleared some of the problems for some people)
2) format dalvik cache
2a) -skip this step the first time you try, but it may end up being necessary- NVFlash back to a stock 1.2 setup that includes NVFlash (if you are on windows, I posted my NVFlash folder link (HERE) that has a few batch files for stock or CWM recovery)
3) wipe data / factory reset (in CWM)
4) -my method- format /system & /data (by doing this, it basically makes blank, formatted partitions)
4a) wipe dalvik cache again! especially if you let your system fully boot after the NVFlash - CLEAR THAT CRAP OUTTA THERE!!!
5) mount usb and copy over the zip file to the root of your internal sd card (which should be empty after part 1 - if not repeat step 1)
6) install zip from sd card
7) Reboot.
MAJOR RELEASE NOTE: The version 1.1.0 release is a full installation package with a completely new base. As such, please make a backup of your data just in case a full wipe becomes necessary during your upgrade process. I highly recommend a fresh start, but since we are upgrading the kernel, a wipe of the dalvik cache is mandatory at the very least.
APPLICATION COMPATIBILITY: KNOWN ISSUES as of release v1.1.0
(Thanks to Jcp171, Cobey, and EVERYONE for helping work through the app testing):
General Apps:
1. Market: Working properly with the standard market fix... slightly limited before the fix.
2. Skype: working. I have been using it for a while now and it seems to work like a champ.
E-mail:
1. Default E-mail: Works great, but being a non-Gingerbread ROM, Secure Corporate E-Mail setups may not work (Mine does not because of lack of appropriate security suppprt)
File Managers:
1. ES File Manager: Ran fine, was able to give file manager root. UPDATE: You can just long-press the STAR icon to get to the root directory. (THANKS bdds13!)
2. iFileManager: Works fine, but is just a basic file manager. For root access use ES file explorer or root explorer.
Utilities:
1. Anreboot: Fine for reboots, but DO NOT USE THIS TO REBOOT INTO RECOVERY. It will likely only ever reboot into recovery forcing you to NVFlash the device to get it working again.
Games:
1. Plants Vs Zombies: (Doesn't work)Loaded and got all the way into the first level but quickly crashed. Will crash at some point either loading or trying to play. At the most it's extremely unstable...
2. Gem Spinner II: Not functional
3. Game compatibility with several games improved (Cut the rope now works) by removing the undervolt and returning voltages to default levels (still at 1.6ghz). May vary tab to tab... (Note: Even lowering the speed to 1ghz did not change Plants vs Zombies or Gem Spinners non-functional statuses...)
Any other apps we tested worked. Please let us know if you find an app with a problem and we can make sure to confirm the issue to help Pix out.
CHANGELOG:
v1.1.0
- Based on Advent VEGA Firmware v1.10
- Kernel - clemsyn 2.6.32.9 (MM061 #128) - 1.6GHz OC/UV/SOD protection/Skype fix/PPP support
- Updated to latest Market (Google Play) along with some of the other Google Apps.
- New wallpaper
v1.0.9
- Updated Kernel to clemsyn 2.6.32.9 (MM061 #128) - 1.6GHz OC/UV/SOD protection/Skype fix/PPP support
- Build Prop tweaks.
- System tweaks
- This is a FULL install
- Final version to be based on Advent VEGA Firmware v1.09
v1.0.2
FT 1.0.2 with default kernel at 1.6ghz:
Smart Bench:4857/2263
Quadrant:3456
FT with NEW 1.6ghz SOD fix by Clemsyn applied
Smart Bench:5022/2381
Quadrant:3416
- ADB works fine
- Market still requires the market fix, but more apps show up now (back to the olympus settings)
- Revised graphics in framework-res.apk
- Incorporated build.prop tweaks by JCP and the rest of the community - THANKS FOR THE HELP
- Most other features from v1.0.0 remain the same in this release.
v1.0.1
- POSSIBLE ADB ISSUE - TO BE CORRECTED IN 1.0.2
- Incorporated build.prop tweaks by JCP and the rest of the community - THANKS FOR THE HELP
- Returned to the default android font
- Most other features from v1.0.0 remain the same in this release.
v1.0.0
- Incorporated the G-Sensor Fix to allow games and apps to read the orientation of the tablet correctly.
- Most features from RC1 have stayed the same in the OFFICIAL release.
- Added the most up-to-date (and working) version of the Android Terminal Emulator (by jackpal)
v1.0.0 RC1
- Reworked more icons - Icons were picked & modified from Froyo, GB, HC & ICS
- Added new basic boot animation
- Added new default wallpaper (working on a wallpaper picker app to include more)
v004b
- Replaced our custom launcher with VTL Launcher 1.7.5 from gojimi (thanks again)
- Removed ASUS Water LWP (was broken by skype kernel)
- Removed nexus prime bootanimation
- Minor Build Prop changes (still @ LCD Density of 160)
- Reworked framework-res.apk (thanks to the UOT Kitchen)
Reworked lock screen sliders
Reworked color scheme
Changed fonts for a different look
v004a
- Modified boot.img to fix install error that bdds13 was having (needs to be tested)
- Added new 2nd boot logo
- Added new bootanimation.zip (nexus prime - possible slowdown issue here)
- Minor Build Prop change to test market compatibility (olympus device prop - still @ LCD Density of 160)
DOWNLOADS:
Grab FrankenTABv110 FULL from HERE
If you try it out and it doesn't work or your house burns down, or your cat turns into a zombie, IT'S NOT MY FAULT!!!
FULL INSTALL - 130.07 MB DOWNLOAD
OLDER DOWNLOADS:
Grab FrankenTABv109 FULL from HERE
FULL INSTALL - 107.6 MB DOWNLOAD
Grab FrankenTABv100 FULL from HERE
If you try it out and it doesn't work or your house burns down, or your cat turns into a zombie, IT'S NOT MY FAULT!!!
Grab FrankenTABv101 UPDATE from HERE
UPDATE ONLY - REQUIRES v1.0.0 TO BE INSTALLED FIRST - 9.78 MB DOWNLOAD
Grab FrankenTABv102 UPDATE from HERE
UPDATE ONLY - REQUIRES v1.0.1 TO BE INSTALLED FIRST- 9.76 MB DOWNLOAD
SPECIAL ADDITIONS:
"I have included 1.6 ghz, Skype fix, PPP. With PPP, I had to upgrade the wifi drivers to get it to build so not sure SOD fix will hold but please test for me thanks." - Clemsyn
Clemsyn has asked us to test his latest kernel build for froyo with SOD protection, Skype fix, and PPP support. Grab the download and let the testing begin. If it goes well I will incorporate it into the v1.1.0 release of FrankenTAB. UPDATE 02/08/2012 - This will be the new default kernel in the v1.1.0 release - all tests confirm this to be an excellent release from clemsyn.
Grab FrankenTABv001a from HERE
- v001a is based on VeganTAB 5.1.1 just ported to the 1.2 BL with clemsyns kernel and a market update. (Still seems to be fairly popular - I will continue to support v001a as best I can for those looking for the classic VEGAN experience on the 1.2 boot loader.)
SCREENSHOTS:
Work is coming along good on v1.0.2. I hope to have a release ready this weekend. This release will be very minor tweaks to some icons and graphics that were not receiving a lot of love from the community, along with some tweaks to the build prop.
In the next phase of testing I will be looking at kernel options including support for ppp in the default kernel, along with the possibility of an optional kernel or kernels. (will be v1.1.0)
Anyone that wants to test v1.0.2 I have uploaded a testers update HERE please be detailed in reporting any problems or new successes that are found.
Cool does camera or google talk work with camera?
Is this the full ? : FrankenTABv100.zip or is it this one FrankenTABv100RC1-full-install.zip
Thanks cant wait to try it
P.s Oh NVM i see its 2.2 none of the new Google apps will work thanks
Version 100 is the latest full file. version 100rc1 is the older release candidate.
no PPP support
Same like other ROM with clemsyn kernel
I try to use pppd (pppd /dev/rfcomm0 call xxx) but got message below
pppd: This system lacks kernel support for PPP. This could be because
the PPP kernel module could not be loaded, or because PPP was not
included in the kernel configuration. If PPP was included as a
module, try `/sbin/modprobe -v ppp'. If that fails, check that
ppp.o exists in /lib/modules/`uname -r`/net.
See README.linux file in the ppp distribution for more details.
Any chance to compile kernel with PPP support ??
I can ask clem to compile me a custom kernel, but it may take a lil while. I had planned to ask for something custom from him anyway so I will toss that in too. I will post an update in the second post when I hear from him, so keep an eye out.
I have been running this since 1.0.0 and love it. This is the ROM I have settled on. After trying Gingerbread and HC, I came back to Froyo for estability and speed. Love the icons on the status bar (Home, back, menu). All acceleration works including HD video. Like I said, very smooth and stable. All the games also work with it.
Netflix, Flash, Skype work.
Just loaded up over flashback, no problems here. Running so great!!!
Sent from my SGH-T959 using xda premium
Excellent ROM
Love it!
I love it!
Are you considering changing the icons to ICS themed icons?
I may look into it for a future release, but right now I have to post the update (v1.0.2 is live) and try to confirm that, with the new kernel that clemsyn compiled for us, SOD issues are solved and SKYPE IS WORKING PROPERLY!!
watch the OP in the next few mins for the updates and details!!
"I have included 1.6 ghz, Skype fix, PPP. With PPP, I had to upgrade the wifi drivers to get it to build so not sure SOD fix will hold but please test for me thanks." - Clemsyn
Clemsyn has asked us to test his latest kernel build for froyo with SOD protection, Skype fix, and PPP support. Grab the download and let the testing begin. If it goes well I will incorporate it into the v1.1.0 release of FrankenTAB
Download link is in the OP under SPECIAL ADDITIONS
why the hell i can't boot any rom , after installing flashback 10.3 ?!
You should NVFlash back to stock, and then try to install. Thats the best help I can give with the information you have provided.
Good luck. If that doesnt do the trick, let us know and we can try to work through it.
PixelRider said:
You should NVFlash back to stock, and then try to install. Thats the best help I can give with the information you have provided.
Good luck. If that doesnt do the trick, let us know and we can try to work through it.
Click to expand...
Click to collapse
thanks
i'll try it now
I hate to see someone get frustrated and give up. I hope it works for you this time.
PixelRider said:
"I have included 1.6 ghz, Skype fix, PPP. With PPP, I had to upgrade the wifi drivers to get it to build so not sure SOD fix will hold but please test for me thanks." - Clemsyn
Clemsyn has asked us to test his latest kernel build for froyo with SOD protection, Skype fix, and PPP support. Grab the download and let the testing begin. If it goes well I will incorporate it into the v1.1.0 release of FrankenTAB
Download link is in the OP under SPECIAL ADDITIONS
Click to expand...
Click to collapse
Hi PixelRider,
I try pppd on 1.02 update but still got error message below
FYI, I'm trying to do DUN over bluetooth connection
I follow instruction at link here
http://forum.xda-developers.com/showthread.php?t=1406847
It works on cyanogen ROM which is based on gingerbread
But none of froyo based ROM works and always reported such error message
I attach chat binary for froyo which i compile in case somebody
want to try this
pppd: This system lacks kernel support for PPP. This could be because
the PPP kernel module could not be loaded, or because PPP was not
included in the kernel configuration. If PPP was included as a
module, try `/sbin/modprobe -v ppp'. If that fails, check that
ppp.o exists in /lib/modules/`uname -r`/net.
See README.linux file in the ppp distribution for more details.
So far the ROM is great. I came from brilliant corners. My only issue is sometimes with flash, it's all blocky and distorted like a messed up NES cartridge.sound is fine.i fix it by full screening the flash video or changing the resolution, then back. Also, is there a DSP manager, or sound booster working in this ROM (for speakers, not headphones?) Thanks
Wifi can sleep when screen turns off?
Using 1.02 update, I notice also wifi never goes to sleep eventhough
I have setup wifi sleep when screen turn of in wifi sleep policy
Anybody experience the same?
evild said:
So far the ROM is great. I came from brilliant corners. My only issue is sometimes with flash, it's all blocky and distorted like a messed up NES cartridge.sound is fine.i fix it by full screening the flash video or changing the resolution, then back. Also, is there a DSP manager, or sound booster working in this ROM (for speakers, not headphones?) Thanks
Click to expand...
Click to collapse
I am looking into a DSP for later release.
dony71 said:
Using 1.02 update, I notice also wifi never goes to sleep eventhough
I have setup wifi sleep when screen turn of in wifi sleep policy
Anybody experience the same?
Click to expand...
Click to collapse
I will look into wifi sleep and let you know what I find.
Hey guys, I have a stock Mango Focus. Sometimes when I open certain apps they load for a few seconds then crash. Most of the apps are location service related apps, such as the weather channel. I did hard reset and the problem still exists.
Does anyone else have similar problems ?
vrs2610 said:
Hey guys, I have a stock Mango Focus. Sometimes when I open certain apps they load for a few seconds then crash. Most of the apps are location service related apps, such as the weather channel. I did hard reset and the problem still exists.
Does anyone else have similar problems ?
Click to expand...
Click to collapse
More details needed:
1. do you have an SD card
2. os details (exact version of os/radio/fw)
3. did this start all of a sudden or it always was like that
4. (tied to 2) have you checked for hardware faults?
EnderPsp said:
More details needed:
1. do you have an SD card
2. os details (exact version of os/radio/fw)
3. did this start all of a sudden or it always was like that
4. (tied to 2) have you checked for hardware faults?
Click to expand...
Click to collapse
I'm having this same problem.
1. No SD Card
2. OS: 7.10.7720.68
FW: 2103.11.8.1
Radio sw: 2103.11.8.1
Radio hw: 0.0.0.3
3. The problem seems to have started out of nowhere.
4. I don't know if there are any hardware faults
erasethenoise said:
I'm having this same problem.
1. No SD Card
2. OS: 7.10.7720.68
FW: 2103.11.8.1
Radio sw: 2103.11.8.1
Radio hw: 0.0.0.3
3. The problem seems to have started out of nowhere.
4. I don't know if there are any hardware faults
Click to expand...
Click to collapse
Are you developer unlocked? If not, I'd suggest a hard reset, even if it means re-installing all your apps. If the problem persists after that, it's a hardware issue.
If you are, then back-up your phone and hard reset. Same as above.
I have been using CloudyG2 2.2 for over a year with no problems. Unfortunately, I filled up my list of Bluetooth devices (thanks La Guardia) which exposes a KitKat bug where Bluetooth connections are then dropped frequently. I reflashed Cloudy G2.2 again to fix this and went along my way. Unfortunately, I just noticed that when I create a wifi hotspot and connect to it, the other device (usually a Chromebook, though I've tried a few things), can connect to the access point but has no internet connection. Pinging Google does not have a response.
Using SQLite Editor, I have set the following:
settings.db -> global -> tether_dun_required = 0
settings.db -> settings -> tether_entitlement_check_state = 0
I feel like this has probably been beaten to death, but the forum search for this specific forum isn't working. Those above settings seem to have worked across the board on other phones, and if memory serves I used to have to set the tether_dun_required record before I reflashed. Is it possible AT&T has recently changed something on their side? Is there anything else I can check to debug this? I am on AT&T and my plan includes tethering.
Phone model: LG-D800
Android version: 4.4.2
Kernel version: 3.4.102
Build number: KOT49I
Software version: CloudyG2 2.2