[Q] SMART netphone 701 - Blade General

Can i flash custom ROMS here on my branded ZTE blade? (SMART netphone 701 here in the philippines)
what do i need to know before trying to flash this phone?
can anybody help me?
basically i'm a newbie in this section, but i have knowledge in flashing via CWM because i also own a samsung galaxy ace.
thanks in advance everyone.

wee22s said:
Can i flash custom ROMS here on my branded ZTE blade? (SMART netphone 701 here in the philippines)
what do i need to know before trying to flash this phone?
can anybody help me?
basically i'm a newbie in this section, but i have knowledge in flashing via CWM because i also own a samsung galaxy ace.
thanks in advance everyone.
Click to expand...
Click to collapse
u have the required knowledge

wee22s said:
Can i flash custom ROMS here on my branded ZTE blade? (SMART netphone 701 here in the philippines)
what do i need to know before trying to flash this phone?
can anybody help me?
basically i'm a newbie in this section, but i have knowledge in flashing via CWM because i also own a samsung galaxy ace.
thanks in advance everyone.
Click to expand...
Click to collapse
Yes, you can! I'm also from the Philippines and I've tried CyanogenMod and its different kangs, Ginger Stir Fry, and Swedish Snow, and they all work on Philippine Blades.
Just be careful because there are some roms that are meant for certain types of Blades (i.e. for certain countries or carriers).

wee22s said:
Can i flash custom ROMS here on my branded ZTE blade? (SMART netphone 701 here in the philippines)
what do i need to know before trying to flash this phone?
can anybody help me?
basically i'm a newbie in this section, but i have knowledge in flashing via CWM because i also own a samsung galaxy ace.
thanks in advance everyone.
Click to expand...
Click to collapse
First check which GEN your phone belongs to. If it is GEN1 you may have to use Wbaw's TPT to GEN2 to use certain ROM's such as CM7 or the newer ICS builds. If it's GEN2,you can flash almost all ROM's. Everything else is the same. Flash using Clockwork.
Sent from my Blade using XDA app

netphone 701 robot hang...pls help:crying:

1. How do I know if I have a Gen1 or Gen 2 device? - Install Mr. Pigfish on your phone.
2. Is it possible to unlock my device? If so, how? - Yes. Read the GUIDE on Root,TPT,CWM,Flashing,Mods,Recovering,etc. for Blade
3. How do I install custom ROM. - Same as item 2.
4. Based on my device i.e Gen 1 or Gen 2, what is the best or stable ROM so far? - I chose CyanogenMod-7.0.3-Blade.
Below are the details:
Android version: 2.2.2
Baseband: V882
Kernel Version: 2.6.32.9-perf
[email protected]
Build Number:ZTE_P729SV1.0.0B14

Looks like you're phone is a Gen 2 blade
2.1 = eclair Gen1
2.2= fryo. Gen 2
2.3= Ginger bread Gen 3
This is only based on information gained on forums like this. I only have the u.k San Fran and have never owned or even seen phones from other countrys. On the whole this seems to be how it works.
Regards.
Sent from my ZTE-BLADE using Tapatalk 2

Related

[Q] Beginner questions about custom roms

Hi all,
I'm very new in the Android world, so please reply as if i'm a complete bastard
I've got a Galaxy Apollo (i5800), without simlock, running Android 2.1 from Samsung (original rom).
Now I read many thing about roms, jpm, jpf, jpg, jpw, jpz, jpb, etcetera etcetera. Now I really don't know what these terms mean.
The only thing I know, is that I would like to try a good custom rom, with easy installation. Do you guys know about a very user/beginner friendly rom?
And also, do I have to root my phone before I'm able to install a custom rom?
Sorry for my bad english and poor knowledge.
Thanks in advance for your reply
Mercedes- said:
Hi all,
I'm very new in the Android world, so please reply as if i'm a complete bastard
I've got a Galaxy Apollo (i5800), without simlock, running Android 2.1 from Samsung (original rom).
Now I read many thing about roms, jpm, jpf, jpg, jpw, jpz, jpb, etcetera etcetera. Now I really don't know what these terms mean.
The only thing I know, is that I would like to try a good custom rom, with easy installation. Do you guys know about a very user/beginner friendly rom?
And also, do I have to root my phone before I'm able to install a custom rom?
Sorry for my bad english and poor knowledge.
Thanks in advance for your reply
Click to expand...
Click to collapse
Hello, welcome to the android world!
jpm, jpm, etc are firmware builds of android 2.2 (froyo)
All custom roms have easy installation (with odin).
You dont have to root your phone before installing a rom!
Kyrillos
Check out the Flashing Guide and Videos on Youtube. ..try InDroid Rom or Kyrillo or Lestat Rom..all are good...
Sent from my GT-I5800 using XDA App
What do you guys think about this rom? youtube.com/watch?v=NY1cySzOh0U
This rom is based on XXJPM.
Will it work on my i5800, currently firmware version: PDA:JG6 / PHONE:JG3 / CSC:JH2 (BSE), language: Dutch?
Will it be buggy, laggy? Will Samsung Kies still be able to detect my phone after flashing this rom?
And, when I don't like this rom, how easy will it be to get the stock firmware on it?
Last, but not least: is this rom going to drain the battery life of my phone?
Many thanks for the replies
Mercedes- said:
What do you guys think about this rom? youtube.com/watch?v=NY1cySzOh0U
This rom is based on XXJPM.
Will it work on my i5800, currently firmware version: PDA:JG6 / PHONE:JG3 / CSC:JH2 (BSE), language: Dutch?
Will it be buggy, laggy? Will Samsung Kies still be able to detect my phone after flashing this rom?
And, when I don't like this rom, how easy will it be to get the stock firmware on it?
Last, but not least: is this rom going to drain the battery life of my phone?
Many thanks for the replies
Click to expand...
Click to collapse
Take a look at this thread: http://forum.xda-developers.com/showthread.php?t=986831
You can't update with kies if you have a custom rom. you have to flash back
Thanks for the replies! I'm currently running Indroid 3.0, and it's working perfect!
It was very easy to install the custom rom, which I didn't expect.
Mercedes- said:
Thanks for the replies! I'm currently running Indroid 3.0, and it's working perfect!
It was very easy to install the custom rom, which I didn't expect.
Click to expand...
Click to collapse
Hy, i have also a question:
- If i flash with a custom rom/kernel can i then install official rom from Kies? Or it's irreversible?
Kies only works with official roms as far as I know...
If you flash a custom rom with odin, kies doesn't recognize the phone (and you can not install official rom from kies).
You can however flash an official rom with odin (rom from samfirmware).
- With the official rom kies also works again.
Thanks, i will be watting for the official rom for the 5801 and then i will install custom rom depending on the users feedback.

[Q] cant install 2.2 to CM7

Hi all!
I tried to install Froyo 2.2 Jellyfish, EFIN, flb ROMS but when them are flashed then I see only Android logo but not boot logo so not work and CM7 ROMs works fine!
So how I can fix it?
can I?
and where I can get kernel for ZTE Blade CM 7.1 RC?
edit: IN cm7 OR NEWER CM7 the voice search is not work, how to get work it?
Are you Gen 1 or Gen 2?
I bought ZTE Blade II which used Froyo and now I use CyanogenMod 7 GingerBread 2.3.4...
So my Blade is GEN2
I use clockworkMod and sometimes ROM Manager ....
So, Do I need the GEN2 Froyo ROM to get it to work on my Blade?
=)
manumanfred said:
I bought ZTE Blade II which used Froyo and now I
So, Do I need the GEN2 Froyo ROM to get it to work on my Blade?
=)
Click to expand...
Click to collapse
Yup, that's why I think it wasn't booting. Try Swedish Spring. It's Gen 1 and Gen 2.
OK, thanks!
Right now I don't flash it to 2.2 because I use CM 7.1 RC which have good free memory so I can do something with my boring blade!
only problem is tat the battery ends too fast! that is really bad!

[Q] cm 10.1 for zte blade g

I have a question. Yesterday i manage to install cwm and unofficial cm10.1 (4.2.2) rom on my zte blade g. It have a few bugs (such as not working to well camcoder) but it's usable. Way faster and more stable than official rom. My question is: is any one know something about page with this development project (i was looking for it, but t disapeared) or is anyone developing something for this device. I would appreciate answer.
blade G
eemiks said:
I have a question. Yesterday i manage to install cwm and unofficial cm10.1 (4.2.2) rom on my zte blade g. It have a few bugs (such as not working to well camcoder) but it's usable. Way faster and more stable than official rom. My question is: is any one know something about page with this development project (i was looking for it, but t disapeared) or is anyone developing something for this device. I would appreciate answer.
Click to expand...
Click to collapse
We still waiting for new rom, but for now its too hard to build. We have very little people interested for this model cell phone.
Also, for blade G you can look in hungary android forum http://www.forum.kelzsoca.hu/androidfans/viewforum.php?f=283 and serbian android forumhttp://forum.androidsrbija.com/viewforum.php?f=321&sid=dc252de4ac2da92c15617cff953f4def

How to develope a Custom Rom

Hi Guys,
maybe this was asked before but I will ask especially for Samsung. So how does it work to develope a Custom Rom, based on a Stock Firmware?
I have a Galaxy S4-GT9515 and since there is no Custom Rom, I am thinking about playing around with it now. There are so many issues (Battery Drain,...), this ******* bloatware and i am using my Moto G now.
I develope little apps for Android, but i am not an expert. Rooting, Flashing Customs Roms and so on, using ADB is nothing new for me.
Do you guys have some basic tutorials for me? And where can I get Samsungs Stock firmwares? And what is about the Kernel? How to modify?
nick9090 said:
Hi Guys,
maybe this was asked before but I will ask especially for Samsung. So how does it work to develope a Custom Rom, based on a Stock Firmware?
I have a Galaxy S4-GT9515 and since there is no Custom Rom, I am thinking about playing around with it now. There are so many issues (Battery Drain,...), this ******* bloatware and i am using my Moto G now.
I develope little apps for Android, but i am not an expert. Rooting, Flashing Customs Roms and so on, using ADB is nothing new for me.
Do you guys have some basic tutorials for me? And where can I get Samsungs Stock firmwares? And what is about the Kernel? How to modify?
Click to expand...
Click to collapse
http://forum.xda-developers.com/android/software

Best suitable Rom to be flashed

Guys can u share the best rom for mt6572 kk4.4.2 out there? I want to give a new look to my phone. please guide me to do it. my phone is rooted. phone: Inew cxq u1. Recently I have flashed my phone via sp tools with stock rom. And this time I want to flash with custom rom. please guide me to install recovery and porting by pc/phone.
Sorry, it's a question impossible to answer. It's also a wrong kind of question in this forum. No decent Android user will answer that. My recommendation is to try different Roms and drink Ron Zacappa.
Sent from my Nexus 5X using Tapatalk
Search on needrom website
I cant tell you how to get the best rom but you can search on needrom website. Go to your phone's section. There would be many rom, so read about their features and search for the one with highest rating.(Generally the latest ones).
I am new to the smartphone world....and i recently rooted a Sony xperia e5 f3311...no problem...i have searched wide for a custom rom, that has been tested on this device...are there people with flashed custom rom on this device.....if i wanted to risk flashing a random custom rom...which one would be most safe....very few info about this phone...maybe cause it's reletavely new..
Any nougat or other custom rom for 4.4.2 android based smartphone with 1 gb ram + rooted .......intex aqua dream?

Categories

Resources