Is there any way i can replace my custom rom with the original 2.3
I currently have the newest Oxygen Rom..
And CWM Recovery 5.0.2.7
Any help would be much appreciated
Apply official 2.2. After it remove repartitions if you have. Then just install official 2.3 same way you installed 2.2. Thats it.
Sent from my Derp using XDA Herp
But how do i Install 2.2, i can't seem to get into download mode
EDIT:
nvm, I think I found something
Damned didn't work
Remove battery. Then put it back while holding both volume buttons and power button.
Sent from my Derp using XDA Herp
I tried, only a pink screen appears
LSn145 said:
I tried, only a pink screen appears
Click to expand...
Click to collapse
http://www.filefactory.com/file/ccfc1c4/n/u8800-OVER_SEAS_GENERAL_VERSION.zip
download this, unzip, put dload folder on sd card and then remove battery nad put it back while holding both volume buttons and power button. this will install stock rom
btw if this link doesnt work now, try later, and I will also try uploading somewhere
edit:
here is the promised link: http://www.mediafire.com/?c97gnolbh9759y7
First you don' t need to flash original 2.2 rom before flash original 2.3.
Now, are you sure that you've put the dload folder, which must contain a file named UPDATE.APP, in the root directory of sd card?
dancer_69 said:
First you don' t need to flash original 2.2 rom before flash original 2.3.
Now, are you sure that you've put the dload folder, which must contain a file named UPDATE.APP, in the root directory of sd card?
Click to expand...
Click to collapse
Yes i have it in /sdcard/dload/UPDATE.APP
Try this, remove battery, press and hold the the compination of buttons and connect the device with usb cable.
dancer_69 said:
Try this, remove battery, press and hold the the compination of buttons and connect the device with usb cable.
Click to expand...
Click to collapse
Still just the pink screen, do i need to change some files maybe.
I have CWM and i think i installed a custom boot.img for root access...
as far as I know, there have to be 2 files in that folder, at least i had 2 files when i did flashing. UPDATE.APP and UPDATE_CUST.APP
If you still have the original boot.img, restore it and try again.
Or go into settings->memory->software update, it's another way to update.
Did a factory reset, still waiting to see if this fixes it...
Did not seem to work, didn't install the stock rom from sd...
I also downloaded original boot.img, but it failed that to
now I'm uploading files which I used to flash stock 2.2. they will be uploaded in about 20minutes if everything goes well ^^
edit:
here is the link: http://www.mediafire.com/?c97gnolbh9759y7 just unzip, and there will be folder named dload. you know the rest
brdnacer said:
now I'm uploading files which I used to flash stock 2.2. they will be uploaded in about 20minutes if everything goes well ^^
Click to expand...
Click to collapse
Thank you very much
I didn't work, so I'll just stick to custom roms for now.
But which rom do you suggest...
I have Oxygen
I've tried CM7(long time ago)
I'll probably try MIUI next...
Change, boot.img or recovery.img, cannot help you to install official rom.
For booting to update mode, responsible is the bootloader, which isn't part of boot.img or recovery.img.
Also you don' t need 2 files on dload folder. You just need the update.app. If a rom has more files, need more steps to flash them all. For e.g if you have a update_cust.app file, you need to flash first the update.app, then rename the update_cust.app, to update.app and flash again.
Anyway if you cannot boot to Update mode, or something you do wrong, or the sd card cannot read from bootloader, and boots on pink screen mode instead.
You can try to put the dload folder on internal sd card.
I think i might have backup of the original system, restoring now to check...
EDIT:
It worked, it was from before i did anything to the phone...
I'm about to cry :'), happy tears everyone...
Thanks for all your help
Damn forgot my pattern...
Related
hi
I have a streak and put the update on the sd root. I then hold volumes and power to get to recovery screen I choose second in the menue install update and it goes to clockwork 2.5 and that canot see the pkg file.
How do I get the mobile to use the file.
thanks for any help
Clockwork does not do pkg files, you need to install the recovery version that goes with the update.pkg file you want to install. This is done via fastboot. You will loose Clockwork recovery when you do this, but you can reinstall it after you do your rom upgrade.
The recovery files can be found here
http://forum.xda-developers.com/wiki/index.php?title=Dell_Streak#Official
Fastboot guide is in the forum somewhere if you need it.
Also you can go here http://mirror2.streakdroid.com/manii/ download the update.zip of whatever build your attempting to flash, put that on your sd card, then in clockwork recovery, use the update with .zip option and it should do the same.
hi
thanks for the help
how do I know which update to use at present I have a muii 2.2.1
and would like to get it back to 2.2
regards
I think 318 (http://mirror2.streakdroid.com/manii/318/) is the best 2.2 Retail Rom option otherwise 351 (http://mirror2.streakdroid.com/manii/351/) for the latest 2.2.2 Retail Rom. I don't know what baseband you have or if the update.zip files install the required baseband when you flash it. If they don't you'll need the 00 baseband for the retail roms and that will require flashing the stock recovery first and running fastboot to install the baseband file (amss.mbn)
Zac
i have finally used an update zip and it loads fine but the screen says android.process.acore has stopped unexpectedly is there something I have missed
thanks again
ok did a factory reset and it appears fine
Go back to recovery and do a Factory Reset from the first screen, not the one in Clockwork recovery. After that I would recommend going into the Clockwork recovery and clearing the Dalvik Cache and fixing permissions.
Zac
Hi
I have downloaded http://mirror2.streakdroid.com/manii/354/update.zip and after that I power off the phone , hold down the Volume UP/DOWN button . Power on ...
And select the update.zip file....
Half way it stated that it FAIL ... and phone reboot ....
Did I do wrongly ?
The zip file could be corrupted. Maybe try re-downloading the file and retry.
Zac
hi
done it and its fine.
while I have your attention if I can pick your brains I tried to root it with z4root and it wont do it...do you know any simple way to do it..the setup is below
ver 2.2.2
baseband gausb1a135100-eu
build 15609
hi
I have installed official rom 2.2.2
base gausb1a135100-eu
build 15609
I have superoneclick which says waiting for device and I have ticked usb.
I flashed superuser booted up and nothing
I am really pulling my hair out now surely I must be able to root but how I dont know.
thanks again
my version is 354 & i rooted with GingerBreak i dont know what other version it will root though
zac68 said:
The zip file could be corrupted. Maybe try re-downloading the file and retry.
Zac
Click to expand...
Click to collapse
i redownload again ... run it .... same ... it ended to (status 7)....
Any idea ?
Chech out xda wiki dell page there you can find all the Rom to download and the recovery.
Sent from my Dell Streak using XDA Premium App
carpy47 said:
hi
I have a streak and put the update on the sd root. I then hold volumes and power to get to recovery screen I choose second in the menue install update and it goes to clockwork 2.5 and that canot see the pkg file.
How do I get the mobile to use the file.
thanks for any help
Click to expand...
Click to collapse
have you named it "Update.pkg" or "update.pkg" coz the first will work and the second will not .
You will have to use capital U otherwise the phone will not recognise it
capitalization usually shoulnt matter, it works fine as 'update.pkg'
So my phone is stuck in HBOOT ALL THE TIME NOW. I downloaded the new Kings Alliance Rom and followed the instructions. Once I go through the HBOOT Bootloader it sees my image but and then gets to one part and has an issue with the image so now im stuck.
What am I doing wrong?
Run a RUU back to complete stock and see if it will boot to stock
When it does re root and flash whatever ROM you want.
where can i get RUU and the instructions? And thank you
jmeeder said:
where can i get RUU and the instructions? And thank you
Click to expand...
Click to collapse
I put the links in the post.
Take that .zip file [make sure it's named PC36IMG.zip] and put it on the root of your SDCARD.
Go into the HBOOT and say yes to running it.
Then root with the root link I gave you.
Ok the RUU one said page not found but the root one did work.
http://forum.xda-developers.com/showthread.php?t=838448 is the link i got with root but nothing with RUU.
Thanks for helping me out btw.
jmeeder said:
Ok the RUU one said page not found but the root one did work.
http://forum.xda-developers.com/showthread.php?t=838448 is the link i got with root but nothing with RUU.
Thanks for helping me out btw.
Click to expand...
Click to collapse
Here's the RUU thread:
http://forum.xda-developers.com/showthread.php?t=884060
You want "PC36IMG_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2 .15.00.11.19_NV_1.90_release_161482_signed.zip (202.01 MB)"
Rename it PC36IMG.zip [make sure it's NOT PC36IMG.zip.zip]
You're welcome.
So let me ask this, with the rom i have downloaded the new one (the one i crashed with lol) is it supposed to be named PC36IMG or PC36.IMG or PC36IMG.ZIP?
jmeeder said:
So let me ask this, with the rom i have downloaded the new one (the one i crashed with lol) is it supposed to be named PC36IMG or PC36.IMG or PC36IMG.ZIP?
Click to expand...
Click to collapse
No.
"Aftermarket" xda ROMs are supposed to be flashed via your custom recovery (ra or clockworkmod)
jmeeder said:
So let me ask this, with the rom i have downloaded the new one (the one i crashed with lol) is it supposed to be named PC36IMG or PC36.IMG or PC36IMG.ZIP?
Click to expand...
Click to collapse
I see your post now saying name it PC36IMG.ZIP i just checked my rom i downloaded and its named correctly, it tells me wrong image type when it goes through the process.
So what do you think would cause that? I am still downloading the rom you said to get btw.
jmeeder said:
I see your post now saying name it PC36IMG.ZIP i just checked my rom i downloaded and its named correctly, it tells me wrong image type when it goes through the process.
So what do you think would cause that? I am still downloading the rom you said to get btw.
Click to expand...
Click to collapse
No only name the RUUs pc36img do NOT name ROMs you download off xda as that.
You can flash those in your custom recovery. (Go to your bootloader, select recovery, select flash zip from sdcard, select the rom and flash)
mattykinsx said:
No only name the RUUs pc36img do NOT name ROMs you download off xda as that.
You can flash those in your custom recovery. (Go to your bootloader, select recovery, select flash zip from sdcard, select the rom and flash)
Click to expand...
Click to collapse
Furthermore, the ruu is only to return you to stock.
To ensure that your phone is good to go.
Then reroot.
Then go into the recovery and flash whatever custom rom you want how I said.
so you are saying whatever the download was named originally then thats what i should have left it and installed it as?
Yes, leave the Rom named what it was then boot into recovery and flash the romnamehere.zip from there.
Sent from my PC36100 using XDA Premium App
ok let me try that........
jmeeder said:
ok let me try that........
Click to expand...
Click to collapse
The reason I wanted you to run a ruu is because you had said you flashed something and it wont go past the bootloader.
Running the ruu returns it to complete stock.
Ok now i am redownloading Netflix-AllianceROM-2.1....seems i transfered the original to the sd card and that card is now blank it appears talk about frustrating. after it downloads ill install it in recovery with that name just as it is...fingers crossed it will work.
Download File
Rename to PC36IMG (all caps) +++++++THIS IS WHERE I CHANGED THE FILE !!!!
Place on root of sd card
turn off phone
Put into bootloader power button/vol down
Bootloader will read the update
Follow prompts yes & yes
reboot phone!
Remove file from sd or it will read the file over and over everytime you boot yur phone!
Enjoy oldskool simple flawless recovery!
Done flash away!
So I followed those instructions but I think the file he was talking about renaming was the recovery file or something else? Anyway it confused me.
jmeeder said:
Download File
Rename to PC36IMG (all caps) +++++++THIS IS WHERE I CHANGED THE FILE !!!!
Place on root of sd card
turn off phone
Put into bootloader power button/vol down
Bootloader will read the update
Follow prompts yes & yes
reboot phone!
Remove file from sd or it will read the file over and over everytime you boot yur phone!
Enjoy oldskool simple flawless recovery!
Done flash away!
So I followed those instructions but I think the file he was talking about renaming was the recovery file or something else? Anyway it confused me.
Click to expand...
Click to collapse
That's how to run the ruu.
Not for flashing a custom rom
Do you have a custom recovery installed???
Sent from my PC36100 using XDA Premium App
http://forum.xda-developers.com/showthread.php?t=1120734
thats where i got it from i either misread it or didnt read it enough
Ideos U8800 Gingerbread Beta 1 U8800V100R001C00B517G001(Beta1.0)(Overseas Normal)(Gingerbread)
Contains original:
recovery.img
boot.img
cust.img
amss.mbn
EMMCBOOT.MBN
Thanks man.
thanks for this but it didn't help.
its endless bootlooping.
So not possible to reboot this ****
Try to reboot via adb. This always works for me
What is this?
http://www.addictivetips.com/mobile/what-is-adb-and-how-to-install-it-android/
If you have it you can run from command prompt the command: adb reboot
to reboot the device from pc. Also you can boot to recovery, you can wipe data system etc.. and other stuff if device is rooted and has busybox.
sport_billy said:
Ideos U8800 Gingerbread Beta 1 U8800V100R001C00B517G001(Beta1.0)(Overseas Normal)(Gingerbread)
Contains original:
recovery.img
boot.img
cust.img
amss.mbn
EMMCBOOT.MBN
Get it from here
Click to expand...
Click to collapse
Please provide also an instalation procedure.....
It is not something new that you install.
These are the original image files included in the 2.3.5 version, in case someone needs them if flashing went wrong and needs to revert to original files.
You get in recovery mode as usual and replace them.
Recovery mode:
boot phone while holding volume up + volume down + power buttons.
The screen gets pink.
If you connect your phone via usb with your pc then you can access it as a storage device.
There are the files you might want to replace.
is this final or beta?
There is no final release yet. We will have to wait for that quite a while I think.
Sent from my u8800
Hi Everyone,
I used these recovery files with B138 rom (stupid, i know - long story). Now, i can only get to pink screen state - can't even get to recovery mode. Everytime i switch the phone on, the Huawei logo appears briefly, then just goes off again - even when i try to enter recovery mode.
Will it help if i replace the recovery files with the ones intended for the B138 rom? If so, can anyone perhaps post a link to them?
I REALLY hope i didn't brick my phone!
dolfius said:
Hi Everyone,
I used these recovery files with B138 rom (stupid, i know - long story). Now, i can only get to pink screen state - can't even get to recovery mode. Everytime i switch the phone on, the Huawei logo appears briefly, then just goes off again - even when i try to enter recovery mode.
Will it help if i replace the recovery files with the ones intended for the B138 rom? If so, can anyone perhaps post a link to them?
I REALLY hope i didn't brick my phone!
Click to expand...
Click to collapse
Simply reinstall the rom. Create a dload at your sdcard and you know the rest.
Second option: search forum there were already boot.img recovery and other image folder files. Replace them while on pink screen and youre good to go.
Sent from my U8800
entrapmen said:
Simply reinstall the rom. Create a dload at your sdcard and you know the rest.
Second option: search forum there were already boot.img recovery and other image folder files. Replace them while on pink screen and youre good to go.
Sent from my U8800
Click to expand...
Click to collapse
Not so simple my friend you missed the point.
It will be stuck @1/2 where it tries to unpack but does nothing.
Hi, i upgrade to GB and i have this problem. The first time it opened fine but after reboot, it stucks on the boot animation logo..It don t open.
How i will fix it?
Staf1988i said:
Hi, i upgrade to GB and i have this problem. The first time it opened fine but after reboot, it stucks on the boot animation logo..It don t open.
How i will fix it?
Click to expand...
Click to collapse
Official GB is having this issue. It happened to me some times. Try upgrading your phone with Dzo's Aurora or downgrade again to 2.2.1. both will give your phone a life and stay away from GB (at least official)
I cannot root the phone. The phone is not opening any more. I can downgrade to Froyo but how i ll update to ICS from 2.2?
Is there any solution to upgrade to Ics from 2.2?
Staf1988i said:
I cannot root the phone. The phone is not opening any more. I can downgrade to Froyo but how i ll update to ICS from 2.2?
Is there any solution to upgrade to Ics from 2.2?
Click to expand...
Click to collapse
No. you need install GB first. Then you install ICS.
Mlopik said:
No. you need install GB first. Then you install ICS.
Click to expand...
Click to collapse
So how i ll do this? I cannot run GB..
Staf1988i said:
So how i ll do this? I cannot run GB..
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=Nu1TYdJdv18
Mlopik said:
http://www.youtube.com/watch?v=Nu1TYdJdv18
Click to expand...
Click to collapse
I follow the video..nothing happens..Again the animation logo only. Everytime i see this logo...Nothing different..
Hey guys i have a problem i updated my U8800 to 2.3.5 and now i want to Update to a ROM i did the tutorials that is here ALL GOOD when i do the Pink Screen the Cellphone connect to PC i see the USB Connections that is OK, BUT ! the partions flash of the Cellphone dont came up ... so i can put the recovery.img for the Clock Manager :/
need help plz
Januh said:
Hey guys i have a problem i updated my U8800 to 2.3.5 and now i want to Update to a ROM i did the tutorials that is here ALL GOOD when i do the Pink Screen the Cellphone connect to PC i see the USB Connections that is OK, BUT ! the partions flash of the Cellphone dont came up ... so i can put the recovery.img for the Clock Manager :/
need help plz
Click to expand...
Click to collapse
Root your phone.
Download the recovery.img you want.
Save it wherever you want at your phone.
Download any root file manager (ex Root Explorer), which can mount and show hidden folders.
Mount ./cust_backup as rw.
Copy and replace recovery.img from SD card to /.cust_backup/image/recovery.img
Done!
Cheers
Hey there, i got the apk of ROOT EXPLORER and downloaded a recovery.img and put on my SD Card then in the apk i copy the .img to imag/ and when i past it says ONLY READ ... i dont know what to do because it is my frist time working with this kind of apk
Edit: Ok i clicked on Mount R/W then pasted and it is ok i guess
Now i want to put Clock Manager to put the Custom ROM and cant right now :\
Edit2: Hmm now i put the clock manager and downloaded the stuff of him in the APK but now i accessed the recovery and i get the Android System Recovery utility what should i do ?
Januh said:
Hey there, i got the apk of ROOT EXPLORER and downloaded a recovery.img and put on my SD Card then in the apk i copy the .img to imag/ and when i past it says ONLY READ ... i dont know what to do because it is my frist time working with this kind of apk
Edit: Ok i clicked on Mount R/W then pasted and it is ok i guess
Now i want to put Clock Manager to put the Custom ROM and cant right now :\
Edit2: Hmm now i put the clock manager and downloaded the stuff of him in the APK but now i accessed the recovery and i get the Android System Recovery utility what should i do ?
Click to expand...
Click to collapse
sorry my friend. I don't understand what your problem is. Have you copied the recovery.img file at the correct folder? Did you boot at recovery ok? what are you trying ro flash?
i had a similar issue - the rom manager installed the CWM but when i booted to it, it was the default one.
So:
1. Delete/rename the recovery.img
2. Then paste new one (for some reason it didnt overwrite it).
3. Just use rom manager to boot into recovery or use the vol + and power button option.
Now in the recovery use the install from sdcard option.
The reason ur not getting the flash/mass storage drive on purple screen is cuz ur bootloader is locked (i assume official gingerbread is installed?)
Hey there, correct i have oficial gingabread, and i want to put a Custom ROM on it ....
And now i accidently deleted the recovery.img and cant paste the recovery that i have on my SD Card to the flash via ROOT Explorer
Now what can i do :'(
cuz the Custom ROM that i want to put is the Elite ROM v10 that is for 2.3 if iam not mistake
Can someone help me out plz
Januh said:
Can someone help me out plz
Click to expand...
Click to collapse
Just reapply official rom. If possible use beta 1 or 2. Keeps bootloader unlocked.
Sent from my Derp using XDA Herp
FINNAAALLYYYYY !!! THANK GOD BETAAA !! thanks m8 i putted a thanks on you
You can apply latest official ROM also and then unlock your bootloader like described here
http://forum.xda-developers.com/showthread.php?p=21659629
You can use the manual method
Then you can plug your phone to your pc at pink screen and paste any recovery version you want inside the image folder.
Sent from my U8800 using xda premium
Hey guys, so this happened to me. After following the guide to install cm 10.1 i got a boot loop, and somehow when i got back to recovery mode 5.0.2.7 my sd card wasnt being recognized, i couldnt connect my phone to pc ( unable to write to ums lunfile ) and i also couldn't mount sd-ext, wich means that i'm stuck in recovery.
I even tried pink screen, but win7 doesnt install the drivers, so i can't copy any new rom to my phone to bring it back to life.
So what can i do?.... im tired of searching an nothing.
(sorry for my english)
repfan said:
Hey guys, so this happened to me. After following the guide to install cm 10.1 i got a boot loop, and somehow when i got back to recovery mode 5.0.2.7 my sd card wasnt being recognized, i couldnt connect my phone to pc ( unable to write to ums lunfile ) and i also couldn't mount sd-ext, wich means that i'm stuck in recovery.
I even tried pink screen, but win7 doesnt install the drivers, so i can't copy any new rom to my phone to bring it back to life.
So what can i do?.... im tired of searching an nothing.
(sorry for my english)
Click to expand...
Click to collapse
Try connecting the phone to a Linux distro, Ubuntu for example. No drivers are needed and you can access the phone via pink screen and a sudo nautilus window
Cheers
You can try to ask someone to give you the drivers and then force install them while connected to pink screen. OR you can connect your phone while got are in recovery and if your computer recognizes phone then push a ROM through adb.
Sent from my Dragon-U8800Pro using xda-developers app
i have already tried to mount the phone with recovery but it doesnt allow me :\
You have flashed previously an official 2.3 rom which has pink screen locked, so you cannot access to the partitions. Linux cannot help you on this.
So if you haven't access to sdcard or to adb, then the only think you can do is to reinstall the official rom. But this time do these 2 more steps which are life savers:
1. Flash the unlocked bootloader. There is a thread on U8800' s forums: "get your pink screen back"(maybe the name isn't exactly this but you will find it using search function). This will flash the B518 bootloader which is the last unlocked. All next version of official rom have the bootloader locked.
2. Make a full backup of the device from linux. There is also a thread for this: U8800 full Linux backup how to
Then you will have the way to recover your device from almost everything.
Also to flash CM10.1 you need larger /system partition. This was the reason of bootloop. There are infos about this on CM10.1 thread on general section.
dancer_69 said:
You have flashed previously an official 2.3 rom which has pink screen locked, so you cannot access to the partitions. Linux cannot help you on this.
So if you haven't access to sdcard or to adb, then the only think you can do is to reinstall the official rom. But this time do these 2 more steps which are life savers:
1. Flash the unlocked bootloader. There is a thread on U8800' s forums: "get your pink screen back"(maybe the name isn't exactly this but you will find it using search function). This will flash the B518 bootloader which is the last unlocked. All next version of official rom have the bootloader locked.
2. Make a full backup of the device from linux. There is also a thread for this: U8800 full Linux backup how to
Then you will have the way to recover your device from almost everything.
Also to flash CM10.1 you need larger /system partition. This was the reason of bootloop. There are infos about this on CM10.1 thread on general section.
Click to expand...
Click to collapse
But how can i install the official Rom if i can´t connect the phone to my desktop?
repfan said:
But how can i install the official Rom if i can´t connect the phone to my desktop?
Click to expand...
Click to collapse
You don't need it just remove your sd and put on another phone or SD reader and copy files to micro-sd then you can update...
My advice: official rom, root, CWM recovery then update to any custom rom.
dark_vader said:
You don't need it just remove your sd and put on another phone or SD reader and copy files to micro-sd then you can update...
My advice: official rom, root, CWM recovery then update to any custom rom.
Click to expand...
Click to collapse
but how can i update if the phone isnt reading sd?
This happens in recovery mode. This isn' t a general sdcard fault. The update mode is different and I don't thing that you have problems with sd there.
dancer_69 said:
This happens in recovery mode. This isn' t a general sdcard fault. The update mode is different and I don't thing that you have problems with sd there.
Click to expand...
Click to collapse
ok so i downloaded the bootloader.zip from "get your pink screen back" i put it in the root of my sd card, so how can i get into updade mode?
Power and vol+ and vol- at the same time.
Sent from my Dragon-U8800Pro using xda-developers app
repfan said:
ok so i downloaded the bootloader.zip from "get your pink screen back" i put it in the root of my sd card, so how can i get into updade mode?
Click to expand...
Click to collapse
No you cannot use bootloader.zip on upgrade mode.
You must install the official rom from upgrade mode as you did the first time.
Then first you must root the phone, flash the custom recovery and after flash the bootloader.zip from there.
dancer_69 said:
No you cannot use bootloader.zip on upgrade mode.
You must install the official rom from upgrade mode as you did the first time.
Then first you must root the phone, flash the custom recovery and after flash the bootloader.zip from there.
Click to expand...
Click to collapse
So i get the official rom from huawei site... Done. Then i paste it on the root of my sd... and then i just need to click vol (+) & (-) +power?
No there age instructions on how to update on the ROM by huawei, is kinda complicated.
Sent from my Dragon-U8800Pro using xda-developers app
SvTeam said:
No there age instructions on how to update on the ROM by huawei, is kinda complicated.
Sent from my Dragon-U8800Pro using xda-developers app
Click to expand...
Click to collapse
Ok so, now i have already put the dload folder with the UPDATE.APP inside the formated sd card.... but once i hit vol up + vol down+ power it only appears the pink screen
repfan said:
Ok so, now i have already put the dload folder with the UPDATE.APP inside the formated sd card.... but once i hit vol up + vol down+ power it only appears the pink screen
Click to expand...
Click to collapse
Did you put dload folder on root? Must be x:\dload with dload contain UPDATE.APP and UPDATE_CUST.APP
dark_vader said:
Did you put dload folder on root? Must be x:\dload with dload contain UPDATE.APP and UPDATE_CUST.APP
Click to expand...
Click to collapse
Ahhhhhhhhh i forgot to put update_cust.app xD
EDIT: i cant find it
repfan said:
Ahhhhhhhhh i forgot to put update_cust.app xD
EDIT: i cant find it
Click to expand...
Click to collapse
You have to rename the update.app from step 2 to update_cust.app I THINK.
repfan said:
Ahhhhhhhhh i forgot to put update_cust.app xD
EDIT: i cant find it
Click to expand...
Click to collapse
Forget maybe isn't necessary. But you need to put that files on root then hit Volume keys + and - and Power button if doesn't work can you tell me what appears on pink screen when you hit that combination of keys.
dark_vader said:
Forget maybe isn't necessary. But you need to put that files on root then hit Volume keys + and - and Power button if doesn't work can you tell me what appears on pink screen when you hit that combination of keys.
Click to expand...
Click to collapse
It IS necessary! That's the proper way to do it! Don't give wrong advice it may harm his phone!