[Q] MYTOUCH 4G STUCK ON mytouch screen!!!!!! help - myTouch 4G Q&A, Help & Troubleshooting

HI I GET THIS PHONE FROM A FRIEND AND IT'S STUCK ON MY TOUCH SCREEN.
I TRY
power off your device, and reboot into hboot/bootloader by press and holding power + volume down buttons
I GET THIS...
GLACIER PVT SHIP S-ON
HBOOT-0.89.0005
MICROP-0429
RADIO-26.11.04.03_M
eMMC-boot
Apr 14 2011,13:18:22
WHEN I TRY THE FACTORY RESET ( STUCK HERE)
WHEN I TRY RECOVERY ( LOOK LIKE WORK BUT THEN SCREEN BLACK AND VIBRATE 7 TIME AND DIE.
PLEASE HELP ME !!!!!!!!!!

First things first. For gods sake turn off your caps lock. Second, download PD15img.zip from the development section and place it on the root of your SD card. Boot back into boot loader and it should flash everything back to stock. If it says "fail pu" you're screwed and now own a brick.
Sent from my HTC Glacier using xda premium

7 vibrations mean HW failure, most likely, from my experience - mean overheating CPU. The phone is screwed, and again, most likely - no amount of repairs will help, except for replacing the motherboard.
In any case, you can go to Glacier Wiki, read section "Troubleshooting". Link in my signature. But don't be surprised if you don't get the phone to function anymore.
And yes, please, turn off your CapsLock. It aids you in nothing but making your post more annoying to read.

Related

[Q] Mytouch 4g stuck in androids skating, PLEASE HELPP!!!!!!!!!!!

So i have this HTC Glacier or mytouch 4g, however u call it, but im trying to find out how to fix it, I go to that HBoot screen, (Btw im new to this forums thing and this mytouch phone, my present phone is the samsung solstice so yea..) So i go to the HBoot screen and go to factory reset and it was starting to do everything well as it seemed but then it did nothing and everytime i try to do it again, it just takes me 3 androids skateboarding, and if i turn it on normally, it goes to the green "T-Mobile mytouch 4g" logo with a white BG, and if i do recovery, it shows a mytouch 4g phone with a Red Triangle and a Red exclamation point, idk about the whole SD Card thing but i have my own SD card with no folders so if theres something i need to put, please tell me specificly. Settings are:
Glacier PVT Ship S-On
HBoot-0.86.0000
Microp-0429
Radio-26.03.02.26_M
eMMC-boot
Sep 27 2010, 11:12:59
Please someone help!! What do i do?
Your post is confusing what exactly are you trying to do?
Sent from my HTC Glacier using xda premium
Read just about any troubleshooting guide that you'll see. ALL "welcome noob" threads have it, in both General and Q&A sections. Wiki has it, link in my signature. Google has it, if you search. TONS of threads. Please do your homework before you're asking the same question for 100000th time. The keyword "PD15IMG" will guide you.
Unfortunately it seems as though you powered off the device in the middle of performing a factory reset. When you thought it was doing nothing, it was working, just not that you could see. Next time, have patience and wait until it tells you it has finished.
You will need to download a stock RUU or PD15IMG.zip and place that on the SD card. After you place the PD15IMG.zip on your SD card, boot into HBOOT. It will look for the PD15IMG.zip automatically and will give the option to install the update or cancel by pressing the corresponding volume button. Run the update and DO NOT turn off your device. When it completes, it will prompt you to press a button to restart. Press that button and you should have your phone back.
Before you ask, the files are available in the Development section. If you can't find them, you shouldn't be messing with this type of activity in the first place.
Sent from my HTC Glacier using XDA App
Cristian said:
So i have this HTC Glacier or mytouch 4g, however u call it, but im trying to find out how to fix it, I go to that HBoot screen, (Btw im new to this forums thing and this mytouch phone, my present phone is the samsung solstice so yea..) So i go to the HBoot screen and go to factory reset and it was starting to do everything well as it seemed but then it did nothing and everytime i try to do it again, it just takes me 3 androids skateboarding, and if i turn it on normally, it goes to the green "T-Mobile mytouch 4g" logo with a white BG, and if i do recovery, it shows a mytouch 4g phone with a Red Triangle and a Red exclamation point, idk about the whole SD Card thing but i have my own SD card with no folders so if theres something i need to put, please tell me specificly. Settings are:
Glacier PVT Ship S-On
HBoot-0.86.0000
Microp-0429
Radio-26.03.02.26_M
eMMC-boot
Sep 27 2010, 11:12:59
Please someone help!! What do i do?
Click to expand...
Click to collapse
read through this.
http://forum.xda-developers.com/showthread.php?p=20344884
please take some time to search before posting questions...
dclaw_fantum said:
Unfortunately it seems as though you powered off the device in the middle of performing a factory reset. When you thought it was doing nothing, it was working, just not that you could see. Next time, have patience and wait until it tells you it has finished.
You will need to download a stock RUU or PD15IMG.zip and place that on the SD card. After you place the PD15IMG.zip on your SD card, boot into HBOOT. It will look for the PD15IMG.zip automatically and will give the option to install the update or cancel by pressing the corresponding volume button. Run the update and DO NOT turn off your device. When it completes, it will prompt you to press a button to restart. Press that button and you should have your phone back.
Before you ask, the files are available in the Development section. If you can't find them, you shouldn't be messing with this type of activity in the first place.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
I think you have the right idea i was just about to say the same thing just try to reset your phone with the stock update and that should have the phone back to factory settings in total

Bricked magic?

OK i've seen a million of these threads and i just want to confirm that i've bricked the htc magic my brother JUST gave me. It was running cm6 froyo redux and i wanted to get ginger yoshi on there. To do that i had to change the radio. I flashed the radio and then restarted as instructed. But then the phone went into boot loop. I can't boot into recovery and i'm not entirely sure how to access the bootloader. It is S-OFF if that gives me any hope at all.
Thanks for any help
If you have s off you could try mumilovers fastboot commander....I say this method as i found it so easy, just make sure u know what phone u have before doing anymore
Sent from my HTC Magic using XDA App
Yeah. Fastboot commander is great tool.
Btw, three modes:
Back + Power (fastboot)
Home + Power (recovery)
Volumedown + Power (hboot)
If phone does not load into any mode => brick
Sent from my A7-040 using Tapatalk
thanks guys. Will try today and get back to you
Sent from my HTC Desire S using xda premium
no luck getting into any of those modes. still getting boot loop.
almost had a glimpse of hope. Turned phone on and it didn't go into a boot loop. However, i foolishly turned it off to access fastboot. Will try again later and see.
You must turn phone off before load into any mode. Remove battery and place it back when bootlooping
Similar Problem!
Hey guys! I got a similar problem. I tried to get Ginger Yoshi 1.5 on my phone but had to change the radio and spl. I managed to change them both to 3.22 radio and 1.33.2010 spl but it changed from 32A to 32B. When I saw that I thought something must had gone wrong. I tried changing it back but what I did was a mistake, I think I flashed the stock spl wich I think it was 1.33.0013. I am now going crazy because my phone wont boot or go into recovery mode, all I get is fastboot mode but when I try to flash a new spl or radio I get "FAILED (remote: not allowed)" . Now I'm stuck with that problem and don't know what to do. Any help? (I posted here because all other threads seem to be from 2010, they're old and nobody answers them, and because it is a similar problem).
Thanks!
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-3.22.20.17
OCT 21 2009, 22:33:27

[Q] Can't flash stock rom, freezes at updating bootloader

Is my phone fried? When I turn it on it's stuck at the MT4G splash screen. I boot into the bootloader with PD15IMG.zip in the root and attempt to update, but it just stops at updating the bootloader. It just stays on the updating screen saying it's updating the bootloader. Tried both stock gingerbread zip files with the same problem.
When I select Recovery, it shows the MT4G screen, then the green arrows and picture of the phone, then it shuts the screen off and vibrates 7 times. I have to remove the battery to reboot.
If I select Factory Reset, the phone just freezes in the bootloader.
Here's my bootloader copy:
GLACIER PVT SHIP S-ON
HBOOT-0.89.0005
MICROP-0429
RADIO-26.11.04.03_M
eMMC-boot
Apr 14 2011,13:18:22
I'm posting this because I didn't see anyone with the exact same issue and I didn't want to give up on it just yet. Any ideas or suggestions?
7 vibrations mean HW failure. Your phone is screwed.
HTC Panache Videotron
jpk1295 said:
Is my phone fried? When I turn it on it's stuck at the MT4G splash screen. I boot into the bootloader with PD15IMG.zip in the root and attempt to update, but it just stops at updating the bootloader. It just stays on the updating screen saying it's updating the bootloader. Tried both stock gingerbread zip files with the same problem.
When I select Recovery, it shows the MT4G screen, then the green arrows and picture of the phone, then it shuts the screen off and vibrates 7 times. I have to remove the battery to reboot.
If I select Factory Reset, the phone just freezes in the bootloader.
Here's my bootloader copy:
GLACIER PVT SHIP S-ON
HBOOT-0.89.0005
MICROP-0429
RADIO-26.11.04.03_M
eMMC-boot
Apr 14 2011,13:18:22
I'm posting this because I didn't see anyone with the exact same issue and I didn't want to give up on it just yet. Any ideas or suggestions?
Click to expand...
Click to collapse
it get the same thing, with the same device... but no vibration....
I have received an MT4G with the same issue, actually this is the second one I receive with the same issue. (FYI: I work at a cellular phone repair store). I have searched far and wide... but now one with a concrete answer as to what to do with this situation. Any help would be appreciated. Thank You

MyTouch 4G PD15IMG.zip not working! Please help!

So I have spent several hours looking through all the threads related to this problem and have had no success with any guide/instructions.
My phone gets stuck on the splash screen. I can get into HBOOT and if I select "Factory Reset" or "Recovery" in BOOTLOADER the phone will just freeze up and not do anything. If I do a "Reset" or "Reset Bootloader" in FASTBOOT it still freezes up.
I tried the PD15IMG.zip and it works well until it asks to update. When I press yes, it shows "-Updating" next to [1] BOOTLOADER and then freezes up (I have left it for 45min and it hasn't changed).
I looked at the IMAGE CRC and the codes in the PD15IMG.zip don't match the ones on the phone (I don't know if that's relevant but just letting you know)
This is the info in HBOOT:
GLACIER PVT SHIP S-ON
HBOOT-0.89.006
MICROP-0429
RADIO-26.13.04.19_M
eMMC-boot
Jul 15 2011, 16:45:17
Pretty much no matter what I try and do in HBOOT the phone freezes up. Please help this is driving me insane!
EDIT: The PD15IMG.zip file is the 2.2.1
Apparently it has worked for a lot of people without any problems...that's why I don't understand why it's freezing up while
"updating"
You should have found multiple mentions of the following:
If this file gets stuck updating, just as if it's showing "Fail-PU" - your eMMC is dead.
And you probably found them, but didn't want to believe your eyes. But you'll have to. Your phone is a brick.
Jack_R1 said:
You should have found multiple mentions of the following:
If this file gets stuck updating, just as if it's showing "Fail-PU" - your eMMC is dead.
And you probably found them, but didn't want to believe your eyes. But you'll have to. Your phone is a brick.
Click to expand...
Click to collapse
Ouch Jack!! U coulda broke it to him a lil easier! No matter though, it hurts just the same..
Sent from my MyTouch 4G using xda premium

[Q] Help MYTOUCH 4G BRICKED OR BOOTLOOP

T-MOBILE MYTOUCH 4G
GLACIER PVT SHIP S-ON
HBOOT-0.89.006
MICROP-0429
RADIO-26.13.04.19_J
eMMC-BOOT
JUL 15 2011, 16:45:17
Hello, my HTC Glacier has been stuck in bootloop and the only thing I can access is the HBOOT.
I tried the following:
1. Unplugged the battery leave if for a minute or two, then plug it back in.
2. Unplugged the SD Card while rebooting.
3. Rebooting through HBOOT
please help me unbrick my HTC Glacier
Write your post with huge letters, colors and other stuff you can, but read a thread just above called "if you think your Glacier is bricked - here" you can't?
And people wonder why they get FLAMED!!!! READ BEFORE YOU POST!!! come on dude it is the first sticky in the Q and A, the same place you posted,How the blankityblank can you miss it !!!!!it is right in ur face when you go to Qand A!!
http://forum.xda-developers.com/showthread.php?t=1844910

Categories

Resources