Database Users

2.3.23 Full SBF on MDW Now

http://www.mydroidworld.com/forums/droid-x-discussion/5633-droid-x-2-3-32-full-sbf.html
I've not flashed it, but the links are currently working.

There's An App For That
For those of you who don't make it in time to get the SBF before it's taken down, don't worry. If you have the TBH app, you are good to go. Not only do they have the 2.3.32 update, but also the 2.3.32 SBF in case you wish to go back. Thank God for TBH. Way to go guys - don't know what I'd do without you.

Enjoy everyone! You're welcome.
We normally discourage openly posting the content from the TBH app but this is an exception in order to make this file available to anyone who might need it.
Thank you for posting links back to MDW and promoting the use of the TBH app.
Good luck and happy droiding!

does anyone have the 2.3.23 update.zip, all the links are dead on MDW. i got the new 2.3.23 sbf file but need the update.zip so I can get onto 2.3.23

I need that zip too. I was able to sbf to 2.3.32 but the bootloader version stays on 30.01.
Sent from my DROIDX using XDA App

email me if you need the update file, i think it was pulled

You can also get it from the TBH app, with the nice upside of supporting TBH

Does the tbh app have the full. 320 sbf available?
Sent from my DROIDX using XDA App

yep
(10 char)

z4 worked for me after i flashed the sbf if it helps anyone.

bal1985 said:
does anyone have the 2.3.23 update.zip, all the links are dead on MDW. i got the new 2.3.23 sbf file but need the update.zip so I can get onto 2.3.23
Click to expand...
Click to collapse
just flash the sbf without updating, worked like a charm coming from my bricked DX.
remember to pull the battery after you update when the droid x animation begins to boot loop. then hold the home button when booting up again, then data/factory reset from the recovery and select reboot system now.
z4root works, confirmed. just installed Fission 2.3 just minutes from sbf'ing 2.3.23.

It's important to remember that flashing the SBF will not update the bootloader whereas the update.zip will update to 30.04 but will not update the baseband.
That is the primary difference as well as the update.zip being rooted and deodexed with busybox installed.

cellzealot said:
It's important to remember that flashing the SBF will not update the bootloader whereas the update.zip will update to 30.04 but will not update the baseband.
That is the primary difference as well as the update.zip being rooted and deodexed with busybox installed.
Click to expand...
Click to collapse
what baseband? there is a baseband update in one of these? why not do the update.zip and sbf in that case?
i thought p3 posted on twitter there was no baseband update in either of them.

not true, sbf coming from 2.3.15 updated it all.

GoldenCyn said:
not true, sbf coming from 2.3.15 updated it all.
Click to expand...
Click to collapse
did you confirm that by going to stock recovery? i have not experienced that myself. only way to update bootloader was with update.zip

cray1000 said:
what baseband? there is a baseband update in one of these? why not do the update.zip and sbf in that case?
i thought p3 posted on twitter there was no baseband update in either of them.
Click to expand...
Click to collapse
The SBF has a baseband update in it, but for almost everyone it won't matter because the baseband hasn't changed from 2.3.15. I think only people still on eclair or the froyo leak were the only ones who are behind on the baseband.

Need help getting off 2.3.13 back to OTA

I want to get off 2.3.13 and go to back to OTA updates, Ive tried searching and finally gave up........I want to download a SBF to get me back to stock so i can get the latest version. I believe my phone was on 2.2 OTA, bootloader version is 30.03.
I have RSD 4.8, Im rooted, have root explorer.
Long story short I deleted some factory .apk's and I flashed this SBF (2.3.13) to update OTA......not realizing it wouldnt fix my problem. Learned my lesson and to turn them to .bak's next time.
please help!

If it's some bloatware you can always get it back on the moto page
Sent from my DROIDX using XDA App

I have all the bloatware on and working.......i think that 2.3.13 is one of the leaked versions and it wont allow me to OTA update......it doesnt even show me an update is available now with the 2.3.13 build

If you're on the froyo leak, you need to flash back to 2.1, then take the OTA updates

If you are on boot loader 30.03, then you need to flash the sbf 2.3.15

oops, didn't see the bootloader was posted, my mistake, 2.3.15 is the correct sbf

I thought there was some bootloader problem thats why i put the info in the post.
Thank you guys, can someone PM me some info on where to find the SBF for 2.3.15.........Ive had no luck googling it.

now officially bricked the phone trying to fix this.
Im in need of some serious help here. I can still flash SBFs but it says mem-map blank service req'd. I downloaded the SBF from
from phoxus gift 2
I have no idea what to do now

http://rootzwiki.com/index.php/Main-Page/Droid-X-Full-2.2-SBF.html
http://www.droidxforums.com/forum/droid-x-rs-guides/12015-complete-droid-x-sbf-flashing-guide.html

1KDS said:
http://rootzwiki.com/index.php/Main-Page/Droid-X-Full-2.2-SBF.html
http://www.droidxforums.com/forum/droid-x-rs-guides/12015-complete-droid-x-sbf-flashing-guide.html
Click to expand...
Click to collapse
+1 on that

Downgrade to stock Froyo SBF from Gingerbread OTA?

I have the GB OTA installed on the Droid Pro, non-rooted. Is it possible to flash back to the stock SBF so that I can root?

rashly said:
I have the GB OTA installed on the Droid Pro, non-rooted. Is it possible to flash back to the stock SBF so that I can root?
Click to expand...
Click to collapse
yes !
I did it myself and it worked !

Yes. I did it to install the cm7 rom
Sent from my SPH-P100 using XDA App

Yes. You need the sbf file and rsdlite. it's very simple.
Sent from my SCH-I800 using XDA App

Do you have to activate this device again after you do the downgrade? Because I'm in Europe and my friend have problems with activating it and removing the Simlock when he bought it. He had to contact both Motorola and Verizon many times before they helped him. Even though, he bought it directly from Motorola, it had a Verizon simlock (and there is no Verizon in Europe) and phone was not activated (and it's supposed to be activated in Verizon network).
So, my question is, will it be necessary to do it again? Thank you for any help!

where could i get sbf?

Here's the 2.26.20 SBF. Then you'll have to take the OTAs for the 2.26.60 and 3.8.7 updates.
http://www.mydroidworld.com/forums/...-sbf-file-2-26-20-full-rsdlite.html#post50971

oh, i guess i wont be able to get ota since im not in US

aZzz.bZzz said:
oh, i guess i wont be able to get ota since im not in US
Click to expand...
Click to collapse
You can download the updates and flash via recovery

My main objective is to gain root but to my understanding I must downgrade back to 3.8.7, root, and then upgrade via TBH gingerbread update. Ok maybe Im doing something wrong but everything goes fine up until when it says something about "re-enumerating" on RSD. After that the process fails with an error code of 0x703E....any suggestions on what I should do to fix this problem?
Sent from my DROID Pro using XDA App

[Stock] [UCKF1][06/29/11] UCKF1 No Bootloaders! 1 click or Full Odin Back To Stock GB

I am not responsible for any damage to your phone, computer, home, girlfriend or family pet. By using this, you release the creator from any liability. ​
I would like to thank icezar1 for his help with this project. I could not have done this without him.
I decided to start this thread because I saw several roms saying "flash back to stock Gingerbread", but they usually involved bootloaders, increasing your chance of bricking your phone. I searched and the closest thing I found to a safer way was a group of stock I9000 roms, but they were deodexed and zip aligned. Since we are using Captivates, I really wanted something designed for our phones, so I made this.
This is stock UCKF1, without bootloaders or a pit. I repackaged the rom (minus bootloaders/pit) into 1 file. The original firmware was downloaded from samfirmware.com. Also, I have tested this on my (only) phone, and it works.
The 3 file version was also downloaded from samfirmware.com. It is the exact same as stock, but it doesn't have bootloaders or a pit. I also tested this package on my (only) phone, and it works.
You will need 7zip to unpack the file. If you need 7zip, you can get it here.
If you haven't already upgraded to the new I897 Gingerbread bootloaders, you can get those >>HERE<<.
Stock UCKF1 No Bootloaders
Odin 3 File No Bootloaders
In the past, some phones have not responded well to 1 click flashes. If your phone is one of those, please don't use this. Use the 3 File version for Odin 1.8x.
Please make sure that your usb cable is plugged into a port in the back of the computer (#1 port on a laptop).
You will lose root by flashing this.
You will lose CWM by flashing this.
This is a wipe package, so don't forget to backup.
Instructions
0 Optional Reboot computer before beginning
0 Optional Convert to rfs (if on ext4)
0 Optional Wipe cache, wipe dalvik cache, clear Voltage Setting(if overclocked/undervolted), do a factory reset.
0 Optional Remove sim card and external sd
Download package
Extract with 7zip
Open One click or Odin 1.81
**place files in corresponding slots for odin 3 file only**
Put phone into DL mode
Check to see Odin recognizes phone (you will see the yellow box)
Click Start

very nice
10 char

thanks for doing this! This is very convenient!

Can we get a deodex/zip aligned version please?
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

Lancez said:
Can we get a deodex/zip aligned version please?
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
I don't think there is a deodex/zipaligned KF1 out there yet. Some of the other folks in the stock thread (last i heard) were having problems with the deodexing. I really did this just as a flash to stock method before flashing a rom.

mrhaley30705 said:
I don't think there is a deodex/zipaligned KF1 out there yet. Some of the other folks in the stock thread (last i heard) were having problems with the deodexing. I really did this just as a flash to stock method before flashing a rom.
Click to expand...
Click to collapse
i've been trying to deodex the damn KF1 for 3 days now and still can not push it back to /system, saying the folder can not be found. well, i guess i'll have to stay with cog5 for a while until someone figure it out

Lancez said:
i've been trying to deodex the damn KF1 for 3 days now and still can not push it back to /system, saying the folder can not be found. well, i guess i'll have to stay with cog5 for a while until someone figure it out
Click to expand...
Click to collapse
Good Luck!

Lancez said:
i've been trying to deodex the damn KF1 for 3 days now and still can not push it back to /system, saying the folder can not be found. well, i guess i'll have to stay with cog5 for a while until someone figure it out
Click to expand...
Click to collapse
Isn't Cog5 deodex'd? It says so in the Cog5 features list. I'm sure if you shoot designgears a PM he can help you out.
designgears said:
Features:
Based on I897UCKF1
Rooted / Deodexed / Insecure Kernel (adbd always root)
Click to expand...
Click to collapse

How is this different than the other UCKF1 one-click?
http://forum.xda-developers.com/showthread.php?t=1127249

acdbx said:
How is this different than the other UCKF1 one-click?
http://forum.xda-developers.com/showthread.php?t=1127249
Click to expand...
Click to collapse
This is also a one click, but it doesn't have bootloaders (boot.bin and sbl.bin). Since bootloaders will cause a permanent brick, i thought it was kinda foolish to flash them just to return to stock before flashing a rom.

id10terror said:
Isn't Cog5 deodex'd? It says so in the Cog5 features list. I'm sure if you shoot designgears a PM he can help you out.
Click to expand...
Click to collapse
yeah, but DG have made a lot of mods on cog5, i want something really close to stock one. i have sent PM to DG before and he never replied me, i guess he was busy.

So if I just wanted stock gingerbread I can use this? Scared to jump the boat!

smanzor88 said:
So if I just wanted stock gingerbread I can use this? Scared to jump the boat!
Click to expand...
Click to collapse
Only if you have the KF1 GB bootloaders already installed.

If i used the regular stock kf1 1click w/ bootloaders and then flashed cog5 and then used the regular stock kf1 1click w/ bootloaders to go back to stock kf1 would i brick? Since they are the same bootloader?

dsilvan55 said:
If i used the regular stock kf1 1click w/ bootloaders and then flashed cog5 and then used the regular stock kf1 1click w/ bootloaders to go back to stock kf1 would i brick? Since they are the same bootloader?
Click to expand...
Click to collapse
Sounds like you should ask in the cog5 thread. My package doesn't have bootloaders.

dsilvan55 said:
If i used the regular stock kf1 1click w/ bootloaders and then flashed cog5 and then used the regular stock kf1 1click w/ bootloaders to go back to stock kf1 would i brick? Since they are the same bootloader?
Click to expand...
Click to collapse
No, you wouldn't brick, unless something interrupts the bootloader flashing process.
The whole point of this 1-click with no bootloaders is to be able to flash to stock without running the risk of bricking your phone from a bad flash. There is no way to truly brick your phone with this 1-click since the bootloaders are never touched.
With that said, you should only use this 1-click if you have already flashed the KF1 bootloaders at least once before.

ok thanks i didnt think it would brick

Nice, a I897UCKF1 Odin-1-Click Gingerbread flash to stock with no bootloaders.
No more flashing to Eclair for a fresh start. I like it.
Great idea,

IDoMy0wnRacing said:
Nice, a I897UCKF1 Odin-1-Click Gingerbread flash to stock with no bootloaders.
No more flashing to Eclair for a fresh start. I like it.
Great idea,
Click to expand...
Click to collapse
Thanks. I've been thinking about doing a 3 file one for odin, too. Some people have phones that don't like one clicks.

And some of us prefer to use heimdall, so 3 file would be great.

[Q] What is the right way to update to 2.3.4?

I have found a lot of information on the forums about updating to 2.3.4 and ending up with a hard brick and am getting a little scared about it. I do think most of the bricks have to do with unlocking the bootloader (at least that's what I understood from the forums).
I currently have a rooted Atrix running 4.1.83. I don't have any other mods installed and I haven't unlocked my bootloader. At this point I just want to update my phone to 4.5.91 and have it be rooted. I don't care about unlocking the bootloader at all.
Which method is best for me? Can I just install the OTA update thru the notification I'm getting on my phone? Or do I need to follow one of the complex processes listed on the forums here. Once again, I don't really need to unlock my bootloader. I just need to be rooted after I update.
Thanks in advance.

if you dont want the bootloader unlocked just OTA..
then root here..
http://briefmobile.com/motorola-atrix-4g-root
or
http://forum.xda-developers.com/showpost.php?p=15872818&postcount=69

defnow said:
if you dont want the bootloader unlocked just OTA..
then root here..
http://briefmobile.com/motorola-atrix-4g-root
or
http://forum.xda-developers.com/showpost.php?p=15872818&postcount=69
Click to expand...
Click to collapse
I'm rooted on 4.1.83 & have my webtop modded...can I OTA and then root?
Sent from my "Emo" rooted Motorola Atrix! Emo Thinks Possible!

maybe ...no
I didn't modify system app bUT just a few settings files only to get status7 and failed to update in recovery (official )
then I tried Motorola software update via PC and It succeeded please try it
Sent from my MB860 using XDA App

blackangel104 said:
I'm rooted on 4.1.83 & have my webtop modded...can I OTA and then root?
Sent from my "Emo" rooted Motorola Atrix! Emo Thinks Possible!
Click to expand...
Click to collapse
From what I've read ..no. You have to OTA from a clean state ..meaning ..no mods. You may soft brick. Hopefully someone will correct me if im wrong..
Sent from my MB860 using XDA App

defnow said:
From what I've read ..no. You have to OTA from a clean state ..meaning ..no mods. You may soft brick. Hopefully someone will correct me if im wrong..
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Ok thanks because I don't want any bricks
Sent from my "Emo" rooted Motorola Atrix! Emo Thinks Possible!

defnow said:
if you dont want the bootloader unlocked just OTA..
then root here..
http://briefmobile.com/motorola-atrix-4g-root
or
http://forum.xda-developers.com/showpost.php?p=15872818&postcount=69
Click to expand...
Click to collapse
Worked like a charm. Thank you!

defnow said:
From what I've read ..no. You have to OTA from a clean state ..meaning ..no mods. You may soft brick. Hopefully someone will correct me if im wrong..
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
I was rooted with webtop mod on 1.83 (no Pudding), and there was no soft brick - the install wouldn't get past verification and never actually modified the system. Rebooting after the failure would bring me right back to the previous state.
I ended up flashing 1.83 SBF, upgrading OTA, rooting, then restoring user apps from Titanium.
YMMV.
Sent from my Atrix using Tapatalk.

It seems, so far anyway, that if you OTA you get a new bootloader that will hard brick you if you try to revert to a previous version. DO NOT flash any sbf files that have a locked bootloader if you OTA! If you start with 4_1.8.3, unlock your bl with pudding, and install a KennethPenn or similar non-OTA based 2.3.4, you keep the original bootloader and can flash back to Froyo.
I have not seen it spelled out this clearly, so I hope this helps someone looking to upgrade. I recommend sticking to non-OTA versions for now.

After OTA update, what happen???
I have my Atrix rooted, and have sideloading. After downloading update (OTA), & start to instal the update, this appear to my screen.
Is this what called "brick"? What should I do now? Flash it?

elias.parasini said:
I have my Atrix rooted, and have sideloading. After downloading update (OTA), & start to instal the update, this appear to my screen.
Is this what called "brick"? What should I do now? Flash it?
Click to expand...
Click to collapse
No.
10

kimmikolter said:
No.
10
Click to expand...
Click to collapse
Could u be more specific, please? I try replace the batery (pull & put it back) & it run again, normaly, with the previous version.
Just want to know why, the file was corrupt or something. So I can prevent on my next try.
Sorry for my bad English. Thank anyway

Why on gods green earth would you ota update and eliminate the possibility of unlocking your bootloader? Just plain dumb if you ask me. Maybe at this point you see no purpose in it but I assure you that down the road you will wish you had not ran the ota. You don't have to worry about bricking your phone if the process is done correctly.
Sent from my MB860