Database Users

[SOLVED] Help, installed wrong ROM (european), now stuck with "Stick Together" screen

[SOLVED] Help, installed wrong ROM (european), now stuck with "Stick Together" screen
I bought a T mobile USA HTC HD2 phone in the U.S. and tried to install Artemis ROM which is for european phones only.
So now I'm stuck with the pink welcome logo ("stick together").
If I press the volume button and soft reset, I can see the screen with my HSPL.
I tried to do hard reset, but it didn't work.
Please help me how to roll back to original rom, or to install any eligible for T mobile usa rom.
Thank you!

Sweet, so that means you are able to get into bootloader?
Just flash task29 then flash a tmous rom

Thanks for the reply.
Could you please exlpain what task29 is and how to do this? Or where I can find the info.
I am a complete noob in this stuff (obviously).
Thank you

Remove SD Card, and Sim Card....
First get into bootloader by holding down the volume down button and power on the device.
next down load this file and run it as administrator: Follow the prompts and instructions.
http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19
When it hits 100% get ready to hold down the volume button again.... the HD2 will reboot and holding down the volume button will get you back into the bootloader.
Now get a US compatible rom and flash it the same way you just did the Task29. This time when its done flashing remove the battery and re insert your SD card and Sim.... let the phone boot up and you will be good to go.
Hope that Makes sense lol.

illconn, thank you for detailed answer!
I'll try it when I'm home. The only thing though is where can I find the US compatible ROM?
update
I got, I thought I'd need official T Mobile's ROM from their web site, but I'll be able to use any of the ROMs available in XDA. Right?

to be safe i would use the any of the ones in here:
http://forum.xda-developers.com/showthread.php?t=653114
Once you read up a little more on here, and understand how some of the things work you can see there are a few more roms that you can use.
But before you can do any of that you need to make sure your phone has the right HSPL... there is a SSPL but just do the HSPL its easy.... now if you have already done this then great. If not start by reading here:
http://forum.xda-developers.com/showthread.php?t=653614
GL and welcome to the world of custimization!!

Yeah, I decided to try to understand the process of changin the ROM.
Now I understand that SPL boots the device. And HSPL allows to boot custom ROMs.
So what is task29 for?

Task29 pretty much formats the internal memory.... although putting a new rom on the device erases, it sometimes leave bits and pieces of the old roms.... so its recomended you Task29 before a new rom so that you dont have any complications later. For example some people will have a lot of freezing, or programs crash, once they task29 and reflash problem solved.
HTH

Thank you!
And last thing, just want to make sure everything is ok, not to repeat the same mistake. When I go to the bootloader, I get Red-Green -Blue-White screen with this data:
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
Serial
That's okay to do the custom ROM, right?

a5med said:
Thank you!
And last thing, just want to make sure everything is ok, not to repeat the same mistake. When I go to the bootloader, I get Red-Green -Blue-White screen with this data:
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
Serial
That's okay to do the custom ROM, right?
Click to expand...
Click to collapse
Yes that is correct; by it showing "CotullaHSPL" that means you HSPL'd your phone and can download any compatable ROM onto your device, but just as posted above use task29. I was afraid to use it myself but after flashing my phone now about 30 times I've gotten over it.
Here is the link to the stock ROM's :
http://forum.xda-developers.com/showthread.php?t=655653
if you use the 2.10.0 it will be back to stock. (but you can still burn ROM's onto your phone) because it won't erase you HSPL, if you run it from your computer.
Make sense?

Guys! Thank you so much! I installed Kumar's ROM. It works like a charm!
I gained so much experience, and fixed the device. I'm so happy! Thank you again. Thank you

installed the wrong ROM for ATOM
i was looking for a WM 6.5 rom for atom and little did i realized that ive downloaded the ROM for exec. it did installed fine in my ATOM but it always bugs me when it is booting up. it only shows the boot screen with ATOM exec LOGO and suddenly shuts down. i was trying to install back the old rom but it says "The ROM that i am trying to install is not designed to work for this device...". is there any way i could remove the atom exec rom in my device and install my old ROM? i badly need help and this is the last place i could get them. thanks very much! any help will greatly be appreciated. More Power XDA-Dev Gurus.
My Device is: O2 ATOM
wrong ROM: O2 ATOM EXEC

wrong rom
is there anything utility that erases the wrong rom installed for XDA ATom. i installed the wrong rom for ATOM and i cant use the phone because it always reboots when i turn it on.
thanks in advance..

illconn said:
Task29 pretty much formats the internal memory.... although putting a new rom on the device erases, it sometimes leave bits and pieces of the old roms.... so its recomended you Task29 before a new rom so that you dont have any complications later. For example some people will have a lot of freezing, or programs crash, once they task29 and reflash problem solved.
HTH
Click to expand...
Click to collapse
is there anything utility that erases the wrong rom installed for XDA ATom like the Task29?. i installed the wrong rom for ATOM and i cant use the phone because it always reboots when i turn it on.
thanks in advance..

Wow. Number one, triple posting THE SAME QUESTION. Uhm, no. Number two, this is the HD2 or LEO section, NOT THE ATOM ONE. You won' t get any help here, you need to go post in the atom section.

Gotta say....I did the same thing as |OP|....this thread is making me very comfortable to fix my problem. Kudos to you guys for being patient with |OP|...it helped another newbiew

I talked to the number on #1 post and all I got is that I must ship the old one first. I told him about my location that shipment would be problem (from me to them, I can arrange shipment to US address and resend to me). Damn, now I must get it on my own for $50 or how much they cost (no ebay, they are mostly scams). Plus I got no Transformers, the card broke down and I had to format it (didn't help for fixing the freezing issue).
I talked to them over Skype though, because.. well I live in Europe. I'm not sure he understood me well, I have a sore throat and I'm having obstacles talking .

Confused

Hy guys and girls.
I am a bit confused here and would like to ask for some help, by the way I already spent a lot of time lookign for answers here but I get more and more confused.
Well I wanted to try some Roms and I saw the high suggestions to install the HDPL first to avoid bricking my expensive HD2, well I tried but the problem is here.
FYI my HD2 is a Telstra version. It came with a black GUI style I guess it was the world wide version, but I am not sure as I did not recorded any info (did not thought on that), then I installed the original Australian Rom (at that time I was not looking for fancy Rom just for the latest upgrade and did not even know about cooked roms). Then I came back to the worl wide version because the autralian one was too bloated, not as nice as the black GUI and it was slower.
Finally I tried the HSPL2 to start tring with ROMs but it gave me an error message telling me I had the wrong version or something like that (I supposed because it is the Telstra version).
Then I tried the HSPL (older) but it gave me an error message telling me I need version 1.42.00. Here it get confused for me: When I do VolDwn + Power I get the following information:
PB81110 HX-BC
SPL-1.42.HSPL XE
0X05
CotullaHSPL 0x40
Serial
1st - Well I read that 1.42.HSPL was supported by HSPL so why it is not being accepted?
2nd - Why my unit is stating CotullaHSPL if I never installed it before? Cotulla comes with it?
3rd - Whats is HSPL in a interaction perspective? It is just a software that sit there and work alone without any GUI or it is something that does have a GUI that I can choose options and things to do? I am still lost on that.
4th - Sorry for the noob questions, but I apreciate if there is someone with patience to help me out (thats what I do when I can help someone).
Thank you
Felipe

Try reading the post about the HSPL:
http://forum.xda-developers.com/showthread.php?t=611433
and this tutorial about flashing ROMs:
http://forum.xda-developers.com/showthread.php?t=609477
Concerning your questions (I'm no expert either, but here goes):
1. You already have HSPL, so no need to install it again
2. Cotulla is (one of) the developer(s) of the HSPL, sort of a copyright
3. HSPL is a peace of software that essentially allows you to install other (custom made) ROMs or ROMs with another language. It has no Userinterface, but loads the ROM on your device
4. Your welcome

Ok but how it happened to get in there if I could not install it?
Perhaps it came with Telstra?

felcas said:
Ok but how it happened to get in there if I could not install it?
Perhaps it came with Telstra?
Click to expand...
Click to collapse
No, it will deffinately not have shipped with HSPL installed.
Sounds to me like someone already hspl'd it and installed a new rom. (black gui?)
did you buy it second hand?

samsamuel said:
No, it will deffinately not have shipped with HSPL installed.
Sounds to me like someone already hspl'd it and installed a new rom. (black gui?)
did you buy it second hand?
Click to expand...
Click to collapse
Hell no I bought it on Expansys, however the box that it came on had a picture of a Telstra one, with blue theme, but when I turned it on it was the world wide black theme and not the Telstra blue one, I changed it latter.
I even tried to instal the HSPL two or three times but it always gave me error messages and never showed the progress bar.
This is too strange for me.
Now I am very afraid if I really have the HSPL installed or a bugged or corrupt HSPL on it because of my failed tentatives.
what you guys suggest me to do to be 100% sure I have HSPL on it before installing cooked ROMs?
Thank
Felipe

i also bought a telstra version t9193 too. The seller ask me for permission to install the Official Rom for me. They state that i will have connection problem if i choose to stay with telstra's rom. So let them install HSPL and Official Rom since i don't want to deal with the connection problem when i have the device. I believe your seller install the HSPL and Official rom for you because they know u will have the connection problem.

felcas said:
Hy guys and girls.
I am a bit confused here and would like to ask for some help, by the way I already spent a lot of time lookign for answers here but I get more and more confused.
Well I wanted to try some Roms and I saw the high suggestions to install the HDPL first to avoid bricking my expensive HD2, well I tried but the problem is here.
FYI my HD2 is a Telstra version. It came with a black GUI style I guess it was the world wide version, but I am not sure as I did not recorded any info (did not thought on that), then I installed the original Australian Rom (at that time I was not looking for fancy Rom just for the latest upgrade and did not even know about cooked roms). Then I came back to the worl wide version because the autralian one was too bloated, not as nice as the black GUI and it was slower.
Finally I tried the HSPL2 to start tring with ROMs but it gave me an error message telling me I had the wrong version or something like that (I supposed because it is the Telstra version).
Then I tried the HSPL (older) but it gave me an error message telling me I need version 1.42.00. Here it get confused for me: When I do VolDwn + Power I get the following information:
PB81110 HX-BC
SPL-1.42.HSPL XE
0X05
CotullaHSPL 0x40
Serial
1st - Well I read that 1.42.HSPL was supported by HSPL so why it is not being accepted?
2nd - Why my unit is stating CotullaHSPL if I never installed it before? Cotulla comes with it?
3rd - Whats is HSPL in a interaction perspective? It is just a software that sit there and work alone without any GUI or it is something that does have a GUI that I can choose options and things to do? I am still lost on that.
4th - Sorry for the noob questions, but I apreciate if there is someone with patience to help me out (thats what I do when I can help someone).
Thank you
Felipe
Click to expand...
Click to collapse
felcas said:
Hell no I bought it on Expansys, however the box that it came on had a picture of a Telstra one, with blue theme, but when I turned it on it was the world wide black theme and not the Telstra blue one, I changed it latter.
I even tried to instal the HSPL two or three times but it always gave me error messages and never showed the progress bar.
This is too strange for me.
Now I am very afraid if I really have the HSPL installed or a bugged or corrupt HSPL on it because of my failed tentatives.
what you guys suggest me to do to be 100% sure I have HSPL on it before installing cooked ROMs?
Thank
Felipe
Click to expand...
Click to collapse
Hello man, I'm brazilian to, so if you want send me a PM I will explain things better in portuguese
Think in SPL/HSPL/SSPL like a BIOS in a PC, it will help you to understand some things. The SPL/HSPL/SSPL are the first softwares that the phone loads.. Read more here: http://wiki.xda-developers.com/index.php?pagename=SPL Questions?
If you phone shows HSPL on the bootloader and it boots, probably your HSPL is not damaged.
Stock phones does not comes with HSPL (that is secure unlocked), it comes with SPL. Probably the seller flashed HSPL on your phone.
So, it is simple to know if you have HSPL or not:
Reset your device - press volume down - Read the screen and if it has HSPL or anything similar, you has it!
Another way is more objective:
Download a custom ROM, then try to flash it via MicroSD method. If it flashes, you have HSPL, if not (security error), you don't have it
Does not metter what version of HSPL you have on your device, it will falsh any custom ROMS. **be carefull** ..................READ READ READ.......................
I sugest Sternas ROMS (ARTEMIS).. It has PT and is very stable.. Take a look here: http://forum.xda-developers.com/showthread.php?t=612580
I hope it helps!
Have a nice flashing

Digao100nocao,
I tried to upload Artemis with the MicroSD but nothing happens, not even an error message.
I changed the name and formated the MScard and copied it to the card but as soon as I get into the bootloader nothing else hapens. When I restart the old ROM is still in effect.
I can only upload it with the CustomRUU, but doing so does not overwrite the HSPL.
As more as I try more it is confusing and weird.
To make things even more scary this morning my earpiece stop working, now I can't hear anything thru it, I hope this is some software problem and I can get it to work.
What I want to do now is just uninstall the current HSPL as I do not trust on it anymore and reinstall a fresh new one. Problem is that I can't find an old version 1.42 to install it thru the MicroSD, only .exe files.

[HELP NEEDED] Stuck in white bootscreen with no connection

Hey all,
Maybe someone can help me out.
Two weeks ago i installed andoid on my HTC HD2.
I used HPSL, radio 2.15.50.14, MAGLDR112 and NexusHD2-Gingerbread_V2.1_NAND. A few days ago, without any reason i got a white bootscreen and i still have it
What a did so far:
* New HSPL3, but the radio didn't connected anymore, error 270.
* A new MAGLDR, i reached 100% in a blink, but then an error 270.
* Using a SD with the original leoimg, i get a (00018003 radio fail) error after a few % and the update failed.
* task29, but again no connection. (after 5 min error 262)
* new USB drivers installed for windows 7 and i also tried it on an windows Xp computer.
So far i only reached my 4 colored screen with:
PB81100 HX-BC
SPL-2.08. HSPL 8G XE
0x05
CotullaHSPL 0x30
* The original rom was RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
Last question, how can i check that the batttery is stil oke for flashing.
Anyone who has a clue what to do?
Thanks in advance.
greetz!
Rob

Mate, I think you´ve done everything. HSPL and Radio ROM versions correct etc.
Since I see more and more people reporting similar problems like you, I get the feeling that some Android builds might have some strange effects on Radio ROMs.
There are too many people with SPL and Radio ROM problems, eg. stuck in bootloader or at the white startup screen.
This didn´t happen at this pace before Android NAND.
Only 1 question though:
Did you try to flash the original ROM using RUU.exe, SSPL or LeuCustomRUU via USB, without having the SIM and the SD card inserted? In rare cases, either one or both were trouble makers...
EDIT: Second question:
What kind of SD card did you try? Bigger cards seem more problematic, too.

I used a 2 gb micro SD card to go back to the original Rom.
I didn't tried to go back to original ROM using USB, because of the connecting problems. So that i'm gonna do now. Any suggestions which to use best?
After your post i tried to the flash with (and without) the formatted sd and the simcard, unfortunatelly i didn't work.

For last your question i can say that connect your phone to PC when it is off. Then keep down "volume down" button and switch on your phone. You get 4 colored screen. On bottom you can see USB word. Let phone for minimum 1h. And you get more 50% charged battery.
After hour you can flash back to original rom or to MAGLDR and forward normally flash android nand. You dont need disconnect or switch off before flash your phone.
Hope helps.

@tictac0566
Thanks for the options!
I tried the options mentioned in question 1, the problem is the connection USB/Radio. SSPL seems to work, but after 1% again connection error.
After a few test it must be the radio.
I tried to flash only a new radio using LEOIMG, after 99% i get the same error as LEOIMG an original Rom (00018003 radio fail)
With HPSL3_PKG i also can't go back to SPL 2.08.000.
So the problem must be there.
Anyone has an idea?? Can i use another radio? If yes, than which?
Thanks!

Still no solution
Tried many things, still the radio is not working.
It could be also HPSL3, because i can't go back to spl 2.08 (or any other (h)spl with the app.
Anyone has an idea??

Just trying to help here, but have you tried doing everything from the start?
task29 and everything else?

Hey i seem to have the same problem as you except my white screen wasnt after a flash, it just randomly went white one day and wouldnt boot.
I have tried MTTY, i can connect via usb but after formatting via MTTY and then attempting to flash a new rom (ship and custom) it just stays on 0% and doesnt do anything else.
Sorry to hijack thread just thought whilst people are looking they can help me too

CrAzYiaN said:
Just trying to help here, but have you tried doing everything from the start?
task29 and everything else?
Click to expand...
Click to collapse
Yes i did, this thread is official mine
It must be the radio or else HSPL3_PKG.
Do you have some options??
Thanks in advance!

tomar5e said:
Hey i seem to have the same problem as you except my white screen wasnt after a flash, it just randomly went white one day and wouldnt boot.
I have tried MTTY, i can connect via usb but after formatting via MTTY and then attempting to flash a new rom (ship and custom) it just stays on 0% and doesnt do anything else.
Sorry to hijack thread just thought whilst people are looking they can help me too
Click to expand...
Click to collapse
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.

Abdul9. said:
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Click to expand...
Click to collapse
Thanks for the advice, but all the roms i tried i got a radio fail during flashing with leoimg.nbbh.

Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?

kawazaki said:
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
Click to expand...
Click to collapse
Yes i tried, but mine HD2 stays on SPL-2.08 HPSL.
I used HSPL3_PKG and HSPL2 in different but still SPL-2.08 HSPL.
Maybe there's where my problems are, but i als can be an corrupt radio.
Anyone an other way to back to SPL 2.08.000 or how to fix the radio?

Then your best bet is to flash with a goldcard

Abdul9. said:
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Click to expand...
Click to collapse
Yes i can get into bootloader. I have tried using MTTY task 29 to format the device then i searched on the HTC site for a compatible ROM. Turns out the only one that doesnt give a negative response when i type in my serial number is the ROM from Taiwan. Tried flashing that using the SD card method and the USB method. Sd card method hangs at 0% and i get a connection error in USB method. I have also tried the latest ROM from Dutty.
If a ROM is not compatible how do you know? Does it hang at 0% or does it finish loading and then wont boot from there.
I have even tried flashing just a radio with the same results.
kawazaki said:
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
Click to expand...
Click to collapse
Yes i tried all different types of HSPL and even SSPL. From the bootloader screen i run the .exe from the computer and it goes through and says 'operation finished successfully'
But when i get back to the bootloader it still says the same HSPL, which is 1.66
Also to note when i power on the device i can hear a small 'click' from it. Could be much worse and be a hardware problem?

Still no solution.
Oke guys, thanks for answering my threat so far!
Still trying to get my HTC back to life.
Is it possible that my problem is in HSPL? (see attachments)
After the white screen i tried to reinstall HPSL 2, 3 and 1, but during the instal my HTC reboot (without the signal "We Hacked It"
I also tried different SD card for LEOIMG, still radio fail 00018003.
One thing i didn't tried is using a goldcard, i downloaded the app but i need a working HTC HD2 to make the card.
Anyone?

No you don't, there you go :
http://forum.xda-developers.com/showthread.php?t=874304

Goldcard is the old method to install a custom rom way before HSPL became popular
so if HSPL don't work then Goldcard wont as well but hey you can still try
I think its more of a hardware problem now since all attempts for software repair is not successful. I had the same situation as yours, white screen then radio fail, tried all solutions but still no luck

sameeeeee
i have the same problem 100%
i already try all these solution and no one is worked
however, some one told me that maybe the problem with the Flash memory of my HD2 because he already try to solve / or already solve such problem "but unfortunately he lost the tools he was used"
this tools is can check the memory and told which memory chunk is corrupted
please if any one know this tools or had it please posted it on.....

That app should be Task 29.

HD2 resists to boot and to flash

Hi,
I've got some major problems with my HD2. First of all, it was running well. Last Saturday, I wanted to update my NAND TyphooN_CM7_v2.5 to TyphooN_CM7_v2.8.1. I opened CWM and made a backup. Afterwards, I installed the 2.8.1 version and after the reboot, I restored the backup(I think that's my mistake).
After that, I checked the build-version - it was still 2.5..
A little confused, I went to buy a BD. I recognized in the car, that the wake up bug happened again and I resetted the phone. Then, it worked fine.
Back at home, I took my phone in order to reinstall the 2.8.1 version. Suddenly, the HD2 only showed a clear white screen. I didn't boot and MAGLDR didn't appear either. So I tried to reinstall MAGLDR - didn't work(sometimes it's the 270 error, then it's the 262..)
What I've done till today:
-Tried to reflash HSPL
-Hardreset
-Tried to flash a tmo original WM Rom via USB(262&270 error)
-Tried to flash a tmo original WM Rom via SD =>No Flash Screen appeared
I'm kinda stuck cause the damn phone won't flash...
The usb connection is functionnable(the HSPL installer recognizes the HSPL version on the phone)
Hope you can help me
Greets
Erbse

Did you use s USB Micro SD card reader to copy tbd leoimg.nbh file to your SD card, and are you sure your SD card is formated Fat 32? Also go to your device manager in the control panel of hour computer while your BD2 is connected via USB and in bootloader. Make sure it says HTC USB Sync.

Yep - I'm sure about everything you mentioned

What to do next? The previous owner assured that the phone's got t-mobile de branding..
I guess then it is necessary to use a t-mobile Rom..
I'm quite confident, that it's not completely bricked - I can still enter the bootloader and the hard-reset mode
Give me some ideas

Erbsenkönig said:
What to do next? The previous owner assured that the phone's got t-mobile de branding..
I guess then it is necessary to use a t-mobile Rom..
I'm quite confident, that it's not completely bricked - I can still enter the bootloader and the hard-reset mode
Give me some ideas
Click to expand...
Click to collapse
Yes if you want to go back to stock and start over this is a very good idea. If you have the T-Mobile Leo with 1024MB RAM then yes only flash the T-Mobile official ROM to your HD2 as the any other official ROM will either brick your HD2 or the ROM will not function properly. Most of the time they brick a T-Mobile HD2 though as they have radios with x.xx.51.xx with them or a radio like these 2.04.50.xx or 2.05.50.xx. Any of those radio versions will brick a T-Mobile HD2
Also this may or may not help but I suggest it as it might help you out. Go to windowsmobile.com/getstarted and download the latest version of ActiveSync or Windows Mobile Device Center depending on what Windows your computer uses. The lateast releases have updated USB drivers and sometimes this is the problem when people are having issues flashing via USB.
You also had said you have tried the stock ROM already so you probably do not have HSPL anymore unless you got HSPL to reflash. So you will either have to flash a stock ROM or flash HSPL again so you can flash a custom ROM.

T-Macgnolia said:
Yes if you want to go back to stock and start over this is a very good idea. If you have the T-Mobile Leo with 1024MB RAM then yes only flash the T-Mobile official ROM to your HD2 as the any other official ROM will either brick your HD2 or the ROM will not function properly. Most of the time they brick a T-Mobile HD2 though as they have radios with x.xx.51.xx with them or a radio like these 2.04.50.xx or 2.05.50.xx. Any of those radio versions will brick a T-Mobile HD2
Click to expand...
Click to collapse
As far as I know, it's the 512 MB Version - a friend of mine made me check it the first day I got it
T-Macgnolia said:
Also this may or may not help but I suggest it as it might help you out. Go to windowsmobile.com/getstarted and download the latest version of ActiveSync or Windows Mobile Device Center depending on what Windows your computer uses. The lateast releases have updated USB drivers and sometimes this is the problem when people are having issues flashing via USB.
Click to expand...
Click to collapse
Already done
T-Macgnolia said:
You also had said you have tried the stock ROM already so you probably do not have HSPL anymore unless you got HSPL to reflash. So you will either have to flash a stock ROM or flash HSPL again so you can flash a custom ROM.
Click to expand...
Click to collapse
The bootloader still says
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30

Ok you still have HSPL 2.08 wich is good as this means you can flash a custom ROM if you want to. Bit be advised that seeing as you have the 512MB version if you use any 3.14 official ROM or 3.14 based custom ROM then you will have to have SPL 3.03.0000 or HSPL 3.03 or you will incounter memory problems, also you will need a Radio version with a 50 in it. bit yhis is only if you are going to use Windows Mobile, if you are going Android don't worry about this.
Now what all have you tried sense your first post, and have hou tried a task 29?

I tried
-several USB ports
-AV and firewall off
-tried to install the other HSPL version(HSPL3 installer)=>Installer says "successfully done"..but there's no change in the bootloader
What's next?Task 29?
Btw: My battery LED doesn't turn green I charged the HD2 the whole night and in the morning, the LED's still orange..Looks like the first MAGLDR. With the first version, the charging didn't work when the phone was off. I had to take the battery and reinsert it. It's like that at the moment...

You want to make sure you have atleast a 50% charge or more on your battery cause you do not want your battery to die whild you are flashing anything as it will almost assuredly lead to your HD2 being bricked.You are right about MAGLDR too and that your HD2 has to be on to charge. Task 29 will delete what ever is in your NAND memory of your HD2 and reformat the NAND memory also. It is always a good idea to run a task 29 when you are going to flash a new ROM of any kind. Be advised though Task 29 will remove MAGLDR from your HD2. Here is a link to Task 29 so you can learn more about it anx download it if hou want to give it a try.
http://forum.xda-developers.com/showthread.php?t=644781

Thx buddy
But how can I be sure about my battery? The HD2 doesn't show me the battery status and I can't recognize it because the LED doesn't change

Erbsenkönig said:
Thx buddy
But how can I be sure about my battery? The HD2 doesn't show me the battery status and I can't recognize it because the LED doesn't change
Click to expand...
Click to collapse
That is a very good point as you have to have a ROM of some kind on your HD2 to get what percentage oc charge your battery has. I also do not know of any software you can get for you computer that can give you this information, but that is not to say it does not exist. You can try googling it to see what you can find. But the best bet is for you to boot up into MAGLDR and pmug your HD2 up to your wall charger and lrt it charge for 45 minutes to an hour and gou will have enough charge then.

MAGLDR doesn't start - the phone's stuck in that screen
The phone's been charging for about 90 minutes - I'll now try task 29

Task29 doesn't work either..
ERROR 262
Somewhere, there's a problem with the connection..but I can't see where
EDIT: I reinstalled the WMDC drivers - still the same error..
EDIT2: Same error with the original windows update drivers

Finally, I managed to use the SD card..
But then, the flashing failed
What now?
EDIT: After a couple of minutes, I pushed the reset button..The bootloader's still there The bootloader says still the same things as mentioned earlier and the usb connection is still working

I know this might be a redundant question, but are you absolutely sure you have the correct stock ROM for your HD2? Also are you 100% positive you have a T-Mobile Leo with the 1024MB ram and not a EU model with 512MB ram?

No problem buddy
I used this german website:"[Upd.19.02] Downloadübersicht HTC HD2 ROMs ( orig. & Betreiber ), Radio und Hotfixes and I took the first T-mobile rom(as it was an advice of an user)=>Auslieferungsrom(means like the rom the phone had when you bought it)
And I'm sure about the 512MB version - it's definetely a EU version!

Erbsenkönig said:
No problem buddy
I used this german website:"[Upd.19.02] Downloadübersicht HTC HD2 ROMs ( orig. & Betreiber ), Radio und Hotfixes and I took the first T-mobile rom(as it was an advice of an user)=>Auslieferungsrom(means like the rom the phone had when you bought it)
And I'm sure about the 512MB version - it's definetely a EU version!
Click to expand...
Click to collapse
OK so your phone looks like the picture of the one I attached below. Does the Duesch Telecom(sorry if I did not spell that right but I know they are the mother company of my carrier T-Mobile USA) not have a website you can download a official ROM from? Sorry I am still translating the stuff on the site you linked lol

Yeah, it looks like that. First, I downloaded the 3rd t-mobile Rom(directly from their website). But then a user told me to take the first version..

So you down;loaded this ROM and flashed it correct.?
Auslieferungsrom/Deutsch 1.43.111.2 2.04.50.22
And you had wanted to flash this one but was told not to correct?
01.02.11 / Deutsch 3.14.111.1 2.15.50.14
Who is your carrier by the way?
Edit: Could you not use one of the ROMs from here

I extracted the "Auslieferungs-Rom" and copied the *.nbh on the SD Card. I renamed it and tried to flash it - got to error message from the picture above.
My carrier is t-mobile de
I'm not sure if I can use a Rom from the HTC website When I use my SN, the website says "Sorry, this software download is not suitable for your device"
PS: Is it possible, that the flashing failed because of the different Radio versions? As far as I know, the version 2.15.50.14 is installed on my HD2. The "Auslieferungs-Rom" is mentioned with an other version..
EDIT: On the german HTC website, my SN only works for T-Mobile Roms.

[Q] HD2 Problems

I bought a used HD2 running CM10(NexusHD2-JellyBean v1.3a). I want to run WP7.8 on it so I looked up the ways to do that. Tutorials like http://forum.xda-developers.com/show...postcount=1193 say to flash a stock winmo6.5 rom before moving to WP7. I tried to do that by trying to flash RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship. The normal RUU Updat Utility came up with lots or errors, but mostly connection or no response from device issues. So upon further reading i found out an alternate way to go about it by renaming the nbh and putting it in an sd card. I used 2GB microSD card and tried to flash it. But mid-way it stopped and upon reboot it said software update failed with a triangle. I went into the 3-color screen and there the message was present as well with two other messages microp led and microp touch. I tried the sd flash method again but it stopped by giving a not allow 00028002 error every time. I flashed HSPL 2.08.000 from the HSPL4 executable and Android booted up again.
i also tried RUU_Leo_S_TMO_UK_3.14.110.1_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship_2 but the same update error(266, i think) came up
Can i now go to a stock rom and then to WP7?
Thanks, in advance
Device details:
Boots with purple "stick together" logo(Weird, google search says this is tmobile america slogan yet this device is not US)
S/N:ht04anw01415
HTC HD2 T8585 P81100 (from the back)

Anyone?

follow the links below & your ready togo

mengfei said:
follow the links below & your ready togo
Click to expand...
Click to collapse
thanks for the reply but i want to go back to the stock rom which it seems i'm unable to do. i tried the usb flash and microsd flash methods with both RUUs. if i get to stock then i can proceed to wp7 with a clean slate. ATM i've flashed energy rom (Energy.Leo.29022.Sense2.5.Reference.Jul.05) with radio 2.15.50.14 in an attempt to see if doing this would help flash stock rom but no success.

IF you want WP7 no need to go back to stock ROM, I guess you haven't take a look at this link
http://forum.xda-developers.com/showthread.php?p=25781675#post25781675
once you have Magldr in your HD2, next steps would be easy as pushing a button

got windows phone 7.8 on it, thanks. But what if i want to later on return to stock rom? even when i was trying to wipe with task29 it was giving same error 266 and as of yet i haven't successfully flashed anything by the RUU method.

HD 2 Problems Win7
hi guys
Yesterday I tried to install HD2 WP7 ... and install a new Radio ROM my phone off, and since I did not start .... no reset button under the battery cover does not work .... it happened to anyone of you?? ... I had previously installed the official 6.5

Ralph79 said:
hi guys
Yesterday I tried to install HD2 WP7 ... and install a new Radio ROM my phone off, and since I did not start .... no reset button under the battery cover does not work .... it happened to anyone of you?? ... I had previously installed the official 6.5
Click to expand...
Click to collapse
Nope but then again, i never had to flash another radio. Try to follow the tutorial in mengfei's signature and if it doesn't work create a separate thread for others to weigh in.

geforceonline said:
Nope but then again, i never had to flash another radio. Try to follow the tutorial in mengfei's signature and if it doesn't work create a separate thread for others to weigh in.
Click to expand...
Click to collapse
If you want stock windows mobile (with HSPL) > Use HSPL to flash windows mobile using the RUU.
If you want stock winmo AND stock spl > Install winmo using HSPL, then use HSPL package to uninstall HSPL (i.e. install stock SPL).
That's the only way I can think of since you're getting lots of errors doing anything without HSPL.

Marvlesz said:
If you want stock windows mobile (with HSPL) > Use HSPL to flash windows mobile using the RUU.
If you want stock winmo AND stock spl > Install winmo using HSPL, then use HSPL package to uninstall HSPL (i.e. install stock SPL).
That's the only way I can think of since you're getting lots of errors doing anything without HSPL.
Click to expand...
Click to collapse
I presume you're talking about the regular USB>3-color screen>RUU(on pc) method. Well, i've been doing that for stock roms and other stuff(splashes, etc.) too but i almost always seem to get error 266 update error.

geforceonline said:
I presume you're talking about the regular USB>3-color screen>RUU(on pc) method. Well, i've been doing that for stock roms and other stuff(splashes, etc.) too but i almost always seem to get error 266 update error.
Click to expand...
Click to collapse
If you don't have HSPL, you will get an error when trying to flash almost anything.
You said you flashed HSPL, but in fact you didn't
geforceonline said:
.. I flashed HSPL 2.08.000 from the HSPL4 ..
Click to expand...
Click to collapse
From HSPL4 you can flash the stock SPL, which is what you did. HSPL 2.08.0000 is stock SPL. With that, you can't do much.
You need 2.08.HSPL.
Try again and report back.

Marvlesz said:
If you don't have HSPL, you will get an error when trying to flash almost anything.
You said you flashed HSPL, but in fact you didn't
From HSPL4 you can flash the stock SPL, which is what you did. HSPL 2.08.0000 is stock SPL. With that, you can't do much.
You need 2.08.HSPL.
Try again and report back.
Click to expand...
Click to collapse
I just tried the USB RUU(with WWE and TMOUK versions) method with 2.08.HSPL and it gave the same error 266

geforceonline said:
I just tried the USB RUU(with WWE and TMOUK versions) method with 2.08.HSPL and it gave the same error 266
Click to expand...
Click to collapse
Try this easy fix:
http://forum.xda-developers.com/showthread.php?t=993472
To sum it up:
*Try a different port.
*Install ActiveSync/WMDC.
*If already installed, uninstall then re-install, or simply try a different computer if you have.

Marvlesz said:
Try this easy fix:
http://forum.xda-developers.com/showthread.php?t=993472
To sum it up:
*Try a different port.
*Install ActiveSync/WMDC.
*If already installed, uninstall then re-install, or simply try a different computer if you have.
Click to expand...
Click to collapse
have WMDC/Zune and drivers(also had activesync but deleted it because even then it didnt work)
tried all three ports
reinstalled it as well but unfortunatly no other pc is available atm

geforceonline said:
have WMDC/Zune and drivers(also had activesync but deleted it because even then it didnt work)
tried all three ports
reinstalled it as well but unfortunatly no other pc is available atm
Click to expand...
Click to collapse
Well, I am sorry then. I am out of ideas; you have wait for other members with greater knowledge.
Edit:
Maybe the USB cable? Although I highly doubt it, there is no harm in trying. Try a different cable and see what happens.

Marvlesz said:
Well, I am sorry then. I am out of ideas; you have wait for other members with greater knowledge.
Edit:
Maybe the USB cable? Although I highly doubt it, there is no harm in trying. Try a different cable and see what happens.
Click to expand...
Click to collapse
well, thanks for trying!
edit: IT WORKED! I tried another cable and while recognizing the pc went to some qualcomm drivers that i used to have and reverted to htc ones and the RUU picked it up and the flashing commenced. Thanks a ton!