Instruction:
1.You need to upgrade to Android 2.3.3, please follow this instruction: http://droidangel.blogspot.com/2011/05/how-to-flash-updateupgrade-samsung_12.html
(If you already upgraded please go to step no.2) choose the one without bootloader.
2.Then time to root it: http://droidangel.blogspot.com/2011/05/procedure-how-to-root-samsung-galaxy.html
(If you already root, go to step no. 3).
3.Flash overcome kernel via Odin by go into download mode: http://www.ziddu.com/download/17518780/002001-Overcome_Kernel_v4.0.0.zip.html
(Do not choose re-partition on Odin) and check how much space do you have in the internal storage (not the total size of your tab).
4.Download the official MIUI http://forum.xda-developers.com/showthread.php?t=1324528
5.Put it into your SD card
6.Boot into recovery mode by press the power button and select Reboot -> Recovery.
7.Wipe data, wipe cache. Go to advance wipe dalvik cache.
8.Install Zip from SD card, select the MIUI zip file that you just download. Choose install it.
9.Reboot your Tap.
10.After that boot into recovery again and install this file: http://ubuntuone.com/7NUVkI862sTvgu5A14bbJk
11.Use ES File Explorer / Root Explorer to delete DroidSanArabic & Hebrew then reboot
12.Install Multiling Keyboard and Khmer plugin from Android Market.
That’s it!!!
Make sure you have System Space at least 1.3Gb. Otherwise you have to redo it again and again.
Use FriendCaster app for Facebook and CM7 Camera (http://www.mediafire.com/?czzy0o2u571ex8y) instead of Stock MIUI.
If you don’t have internal storage you will loss all your app every time you reboot!
Warning:
I hold no responsibility at all. Do it at your own risk!
Make sure you back up, before you flash anything!
ok so there are so meny threads and videos around about rooting and flashing a new rom, my proplem is that i am not an expert, they all give different info,programs to use ect... im a little nervous that i might use the wrong program or miss something and wind up with a brick...
i am using an acer a501 running android v 3.2
so if i understand correctly i need to.....
1.revert back to andriod 3.0.1 (not sure how yet)
2. download iconiaroot1.3, unzip, copy it to sd card (settings set to allow unknown and debug on)
3.install iconiaroot on tablet
4. open and run iconiaroot
5. now rooted
im i correct? did i miss something?
ok assuming all that is correct can i now flash a custom rom?
if so is the process similar? install rom onto sd card and install?
Correct. Just one step more
6. Before installing custom ROM you will need to install Acer Recovery Installer and flash custom recovery.
Root A501
Download a file manager if you don't already have once such as astro file manager or es file explorer. Also download Acer Recovery. Download both of these from the market.
Step 1. To downgrade to 3.0.1 to be able to root first thing you want to do is download this file here
http://depositfiles.com/files/64bo1ivat
Step 2. Once downloaded it copy the update.zip file into the root file of your sd card. the root folder on the sd card is in the tablets internal memory not an external sd card.
Step3. Turn off the tablet and once turned off press and hold the power button and volume down button. Don't release until you see the green andriod with the gears moving.
Step 4. Once tablet has booted back up check to see which version the tablet is running. To Check go to settings....about tablet...and underneath android version make sure the tablet is running 3.0.1
Step 5. If the tablet is running 3.0.1 then download this file.
http://forum.xda-developers.com/showthread.php?t=1138228
This is a link to a xda thread that has iconiaroot-1.3.apk.
Step 6. Download iconiaroot-1.3.apk
Step 7. Before opening iconiaroot make sure in settings....applications that unknown sournces is checked then click development and make sure usb debugging is checked.
Step 8. Now open iconia root and hit root.
Step 9. Run acer recovery
Step 10. Select clockworkmod recovery and instal recovery image.
Step 11. Click this link
http://depositfiles.com/files/vwaavz1pa and download TLSS_A501_3.2_Little_Honey.zip
Step 12. Once downloaded you will have 1 zip file. Rename it update.zip and transfer it do the tablets sd card.
Step 13. Turn the tablet off. Then press power and volume down to run cwm.
Step 14. Once at cwm screen use the volume buttons to go up and down. go down and instal from sd card and hit power to select it. Then select apply sdcard/update.zip then select yes and it will instal
Step 15. Once update is done go back and click reboot system now
Step 16 Go to settings about tablet and double check your updated.
Step 17. Have Fun!!!!
Hey I am trying to root my acer, and ive followed all of these directions up until step 11.. The honey.zip file tht is provided isnt installing. Ive tried installing from the internal sd and the external sd with no luck, I think the file itself may be corrupt. Do I NEED to do this update before I can flash a custom rom?
It looks that Honey.zip IS a custom ROM (don't know for sure).
You're rebooting into recovery and trying to install from sdcard?
Are you receiving any errors? What exactly is happening?
Don't bother renaming to update.zip.... Just select "Install zip from sd card" in CWM...
And no, you can use ANY custom rom at that point...
Remember to wipe all data before flashing
cache - dalvik- battery stats -flexrom etc. etc.
Obviously, you should backup your data previously and then you can restore them
Hi Friends,
A app which helps you to install the zip files with the help of custom recovery.
No need to go for the steps like
1-Reboot recovery
2-Choose zip from SD card
3-Find out the Zip file
4-Confirmation
5-Reboot system
Now forget about these steps.
1-Open Zipinstaller App
2-Choose Zip
3-Click install
The App will open the recovery and try to flash the Zip and reboot itself
Source
http://forum.xda-developers.com/showthread.php?t=1920057
Direct download link
http://goo.im/devs/beerbong/apps/ZipInstaller
Thank you! Good Job!
Anyway, I'm still not using as the main installation method
Android Kitkat based ROM for the ZTE Blade L2
SwitchBL2de
ROM Features:
PreRooted
Apex Launcher
Debloated
Micro SD switched with Phone Storage
Zipalligned
ZRAM
build.prop Tweaks for the following :
Video and Photo Quality
Internet Connection Speed/Quality
Network Performance
Download Link:
Removed - Recompiling Rom, My sincerest apologies to DeviRSilva.
I used an earlier version of his kernel for the build - http://forum.xda-developers.com/android/development/kernel-devir-blade-l216-11-2014-t2945103
MD5 : a719cb770585f24c891fe47da9e56245
Note - Updated hosts file for ad blocking (Use xposed module "hosts Enabler" to prevent adverts)
Once Rom is installed and you restart phone from recovery
It may give the following warning "Root access possibly lost. Fix? THIS CAN NOT BE UNDONE"
Select "Yes - Fix root (/system/xbin/su)"
Credits to BSDgeek_Jake for the hosts file (http://forum.xda-developers.com/showthread.php?t=1916098)
*****************************************************************************************************************************************
Custom Recovery
Please have a read through the information in this link : http://www.howtogeek.com/193055/what-is-a-custom-recovery-on-android-and-why-would-i-want-one/
Flashing a custom recovery on the L2 is a simple process.
Things Required for this process:
Rooted Phone - (Please see the post on Rooting)
Mobile Uncle Tools APK
Recovery Image
First you have to allow the phone to install apps that dont come from Google Play Store.To do so,follow the guide :
1.Settings Menu
2.Security
3.Enable(tick) Unknown sources
4.Untick Verify apps
You can always reset these back to how you found them when you are done.
Download Mobile Uncle Tools
Mega Link: http://goo.gl/IkyVDo
or
MediaFire Link : http://goo.gl/c5q6Jh
Copy APK file to your SD card,use your file manager to install it.
Run Mobile uncle tools,allow root permissions when menu pops up.
You can close the app for now.Next thing we need is the actual recovery file itself.I've attached the recovery i find works best
Carliv Touch Recovery v2.2 - MTK CWM-based v 6.0.4.4
Download Recovery.img file
Mega Link: http://goo.gl/1f8OwX
or
MediaFire Link :http://goo.gl/U1D2Zu
MD5 :9f770b95df8e1beabd7417fc112190bc
Once the file has downloaded,copy to the root of your SD Card.
Open Mobile Uncle Tools and Select "Recovery Update".
Be sure to Select the downloaded recovery image,not anything else.
Select the file and proceed with installation.Mobile uncle tools will then prompt you to reboot into recovery if the update was successful.Select Yes and the phone will reboot into the new recovery menu
Credits to :
eddy.rugal - Base Rom
Carliv - For Recovery
njava - For Mobileuncle MTK Tool
Update
Resize Apps Partition
WARNING! This can BRICK your phone if done incorrectly.
PLEASE FOLLOW ALL STEPS CORRECTLY.
Please make a backup of all your important stuff.
Make a backup in the recovery.Make 100% sure the backup completes without any errors
Reboot into recovery mode (Hold the Up button and press power button to turn device on)
1.Select Backup and Restore
2.Select Backup and Confirm(Proceed)
Once the backup is complete,the backup is located in "clockworkmod" folder on SD Card
You have to factory reset device,so be prepared to reinstall apps/games (You are going to lose data)
If you are fine with all of the above,The following mod increases the App Partition size from 1GB to 2GB.It rewrites the Internal Storage to 513MB(Used for videos/pictures,which is fine since we use our Micro SD cards for that)
If you are happy with all of the above,you can proceed with the next step :
Firstly,Download all files required and copy to SD Card
2 GB for apps_Jellybean_4.zip (232.63 KB)
Mega Link - http://goo.gl/ao3NFO
or
Media Fire Link - http://goo.gl/3j9RWm
AND
MTK_Nvram_Tool.zip (2.9MB)
Mega Link - http://goo.gl/Z2Chpx
or
Media Fire Link - http://goo.gl/sjah8X
Once on SD Card,reboot into recovery mode (Hold the Up button and press power button to turn device on)
1.Select "Install Zip"
2.Select "Choose zip Sdcard"
3.Choose "MTK_Nvram_Tool.zip"
4.Select "Yes - Install MTK_Nvram_Tool.zip"
5.Click Next
6.Select "I Agree with this Terms and Conditions" and click Next
7.Click Next again
9.Choose 'Nvram Backup"
Once its done it should say "Backup Completed"
Under that it should say "Nvram Backup Successfully Completed"
It give the location for that backup,always keep that file (Copy to the PC Later)
10.Click OK
11.Click Exit
12.Click Yes
Now you are back at the install update from zip file screen.
13.Select "Install Zip"
14.Select "Choose zip Sdcard"
15.Choose "2 GB for apps_Jellybean_4.zip"
16.Select "Yes - Install 2 GB for apps_Jellybean_4.zip"
17.Go back to main menu
18.Choose Wipe menu
19.Choose Wipe Data (Factory Reset) -THIS WILL ERASE YOUR DATA
20.Wipe Cache
21.Wipe Dalvik Cache
22.Go back to main menu and reboot phone
The phone should reboot.If you get a message saying you have to format phone storage,click yes to format.
Go to Settings,Storage and See Total space is now 1.97GB
If the phone wont boot,power down,then hold up key and turn on to get into recovery mode.
1.Select Backup and Restore
2.Select Restore and Confirm(Proceed)
Restore the backup you made earlier.
This should let the system load when you reboot again,even if it asks you to format the phone again.
Copy NVRAM Backup to PC for safe keeping.
If you want to return to original/stock
Follow the same procedure as above but use the following file instead of the 2GB File
Stock Partition_Jellybean_4.zip (232.63KB)
Mega Link - http://goo.gl/pMn0ea
or
Media Fire - http://goo.gl/KJfRF7
Credits to :
AnoopKumar - MTK Nvram Tool
Andalitez said:
Hi Guys
Just an update.I downloaded the update from the website again,used winRAR and replaced the modem file in the system.
Everything works great now
Click to expand...
Click to collapse
Hey man can u yplease hook me up with the modem file im kida stuck with unkown baseband too
Replied
BlaqueDroid said:
Hey man can u yplease hook me up with the modem file im kida stuck with unkown baseband too
Click to expand...
Click to collapse
Hey man.
Sent you a PM.Currently working on a rom,will only be able to upload it for you in afew hours
ZTE
ztedevices.com/search.html?keyword=blade l2 look on there for the firmware for your device , push via adb sideloading and you should be set
noob problem...
guys, can you please help me...I also have the same problem when I flashed the kitkat rom...my blade l2 now can't read my simcard...what should I do?...
No Sim Detected
eochi18jhae said:
guys, can you please help me...I also have the same problem when I flashed the kitkat rom...my blade l2 now can't read my simcard...what should I do?...
Click to expand...
Click to collapse
Okay,you have to download the firmware version for your country,and have custom recovery installed on the phone.
So if you in UK,download the rom for your phone from UK provider.(doesnt matter if its JB or KK)
http://www.ztedevices.com/support/index.html
Once you have the rom,Use winRAR to do the following:
1.open the rom from your country in winrar so you can see the contents.
2.Open system folder (dont extract,just navigate into the folders in winrar)
3.Open "etc" folder
4.Open Firmware folder
5.Select "modem_1_wg_n.img" and extract it(i just drag and drop on desktop)
6.Open the Kitkat firmware you've downloaded using winRAR
7.Open System folder
8.Open "etc" folder
9.Open Firmware folder
10. Copy the "modem_1_wg_n.img" into that location(drag and drop from desktop)
11.winRAR asks if you want to :Add/Replace file/s? Select Yes or OK to allow it to
12.copy entire firmware to phone and reflash it on the phone from the SD card
I dont know if you can just replace the modem file after having loaded the firmware.I didnt try or test it.it may or may not work.
I am working on Custom Firmware for this phone though.
latest achievement was i managed to get the phone to see the SD card as phone storage thanks to various xda guides.this will be built in
FIrmware should be ready in a few days after testing.if anybody is interested in trying it out,let me know
problem solved...
Thank you sir...problem solved...it's really hard to be a noob...have to understand a lot of things now....I'm willing to try your firmware on my phone...upload it when done...keep up the good work...sorry for my english...
Post has been updated
I need to talk to you.... Go read my PM
installation is always aborted.. PLEASE HELP
Replied
Thanks
The thread is so useful... Keep up the good work, I don't have patience to try the new ROM!
Is there any chance for kernel supporting overclocking and undervoltage, also with more Gvernor and I/O Sheduler options?
Also Would be gorgeous if there's tap screen to wake option, this would need custom kernel too...
I'm now using DeviRSilva's kernel, which is doing great! Man, don't be afraid to relese it and continue tweaks
Still I'm a noob and maybe half of theese wishes are impossible, but would be so cool if they're possible to develop!
PD: I saw a site promoting Lollipop ROM for our L2 is that real?
PD2: Sorry for my awful English and probably stupid requests and questions...
helpppp
I have probelm, phone do not show sim card, on official site there is no serbia rom please how to fix it?
Andalitez said:
Replied
Click to expand...
Click to collapse
It fails to flash the ROM with the updated radio file. Just stops at Can't open... file.zip '(bad)'. Installation aborted.
How to fix?
Hi how do i unroot the zte blade l2?
And how to I remove costum recovery and reinstall stock recovery and stock rom?
Thanks just asking in case of sending it back for repairing.
Just noticed that the download link has been remoded.
Can someone provide a link for this rom?
Thanks.
Does this ROM have Greek language installed ???
no links are working
I need a copy of carliv recovery and backup of stock recovery as u think although my mobile mainly working I think the recovery is corrupt and has screwed my sound thanks in advance as I am taking a giant leap and biting bullet to try this recovery hope it can flash the legit kit kat if ever released by zte or virgin UK thanks
Andalitez said:
Android Kitkat based ROM for the ZTE Blade L2
SwitchBL2de
ROM Features:
PreRooted
Apex Launcher
Debloated
Micro SD switched with Phone Storage
Zipalligned
ZRAM
build.prop Tweaks for the following :
Video and Photo Quality
Internet Connection Speed/Quality
Network Performance
Download Link:
Removed - Recompiling Rom, My sincerest apologies to DeviRSilva.
I used an earlier version of his kernel for the build - http://forum.xda-developers.com/android/development/kernel-devir-blade-l216-11-2014-t2945103
MD5 : a719cb770585f24c891fe47da9e56245
Note - Updated hosts file for ad blocking (Use xposed module "hosts Enabler" to prevent adverts)
Once Rom is installed and you restart phone from recovery
It may give the following warning "Root access possibly lost. Fix? THIS CAN NOT BE UNDONE"
Select "Yes - Fix root (/system/xbin/su)"
Credits to BSDgeek_Jake for the hosts file (http://forum.xda-developers.com/showthread.php?t=1916098)
*****************************************************************************************************************************************
Custom Recovery
Please have a read through the information in this link : http://www.howtogeek.com/193055/what-is-a-custom-recovery-on-android-and-why-would-i-want-one/
Flashing a custom recovery on the L2 is a simple process.
Things Required for this process:
Rooted Phone - (Please see the post on Rooting)
Mobile Uncle Tools APK
Recovery Image
First you have to allow the phone to install apps that dont come from Google Play Store.To do so,follow the guide :
1.Settings Menu
2.Security
3.Enable(tick) Unknown sources
4.Untick Verify apps
You can always reset these back to how you found them when you are done.
Download Mobile Uncle Tools
Mega Link: http://goo.gl/IkyVDo
or
MediaFire Link : http://goo.gl/c5q6Jh
Copy APK file to your SD card,use your file manager to install it.
Run Mobile uncle tools,allow root permissions when menu pops up.
You can close the app for now.Next thing we need is the actual recovery file itself.I've attached the recovery i find works best
Carliv Touch Recovery v2.2 - MTK CWM-based v 6.0.4.4
Download Recovery.img file
Mega Link: http://goo.gl/1f8OwX
or
MediaFire Link :http://goo.gl/U1D2Zu
MD5 :9f770b95df8e1beabd7417fc112190bc
Once the file has downloaded,copy to the root of your SD Card.
Open Mobile Uncle Tools and Select "Recovery Update".
Be sure to Select the downloaded recovery image,not anything else.
Select the file and proceed with installation.Mobile uncle tools will then prompt you to reboot into recovery if the update was successful.Select Yes and the phone will reboot into the new recovery menu
Credits to :
eddy.rugal - Base Rom
Carliv - For Recovery
njava - For Mobileuncle MTK Tool
Click to expand...
Click to collapse
any news on the kitkat rom yet? super excited to try this out!
is the link for the rom gone?
i dont see it
Hi.
I'm trying to flash MIUI custom ROM in my old canvas 2 colours a120. It is not rooted. I hav the .zip files for rooting & flashing. But i just can't find the location of them in recovery mode. The 'apply update from sdcard' shows the following folders:
@btmtk/
agps_spl/
amit/
anr/
app-asec/
app-lib/
app-private/
app/
backup/
dalvik-cache/
dota/
dontpanic/
drm/
local/
logs/
lost+found/
mdl/
media/
misc/
nfc_socket/
nvram/
property/
resource-cache/
Please help me find my .zip file :crying:
try this
Shabazsap said:
Hi.
I'm trying to flash MIUI custom ROM in my old canvas 2 colours a120. It is not rooted. I hav the .zip files for rooting & flashing. But i just can't find the location of them in recovery mode. The 'apply update from sdcard' shows the following folders:
@btmtk/
agps_spl/
amit/
anr/
app-asec/
app-lib/
app-private/
app/
backup/
dalvik-cache/
dota/
dontpanic/
drm/
local/
logs/
lost+found/
mdl/
media/
misc/
nfc_socket/
nvram/
property/
resource-cache/
Please help me find my .zip file :crying:
Click to expand...
Click to collapse
open your browser settings and try to find it from there or connect your phone to your pc and search by that file name
Download OTA rooting apps like Kingroot or Framaroot and root your device. Then download Flashify/Rashr or mobile uncle tools(not available on Play store) and flash custom recovery.